1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
4 *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
5 *                   AT91SAM9X25, AT91SAM9X35 SoC
6 *
7 *  Copyright (C) 2012 Atmel,
8 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
9 */
10
11#include <dt-bindings/dma/at91.h>
12#include <dt-bindings/pinctrl/at91.h>
13#include <dt-bindings/interrupt-controller/irq.h>
14#include <dt-bindings/gpio/gpio.h>
15#include <dt-bindings/clock/at91.h>
16
17/ {
18	#address-cells = <1>;
19	#size-cells = <1>;
20	model = "Atmel AT91SAM9x5 family SoC";
21	compatible = "atmel,at91sam9x5";
22	interrupt-parent = <&aic>;
23
24	aliases {
25		serial0 = &dbgu;
26		serial1 = &usart0;
27		serial2 = &usart1;
28		serial3 = &usart2;
29		gpio0 = &pioA;
30		gpio1 = &pioB;
31		gpio2 = &pioC;
32		gpio3 = &pioD;
33		tcb0 = &tcb0;
34		tcb1 = &tcb1;
35		i2c0 = &i2c0;
36		i2c1 = &i2c1;
37		i2c2 = &i2c2;
38		ssc0 = &ssc0;
39		pwm0 = &pwm0;
40	};
41	cpus {
42		#address-cells = <1>;
43		#size-cells = <0>;
44
45		cpu@0 {
46			compatible = "arm,arm926ej-s";
47			device_type = "cpu";
48			reg = <0>;
49		};
50	};
51
52	memory@20000000 {
53		device_type = "memory";
54		reg = <0x20000000 0x10000000>;
55	};
56
57	clocks {
58		slow_xtal: slow_xtal {
59			compatible = "fixed-clock";
60			#clock-cells = <0>;
61			clock-frequency = <0>;
62		};
63
64		main_xtal: main_xtal {
65			compatible = "fixed-clock";
66			#clock-cells = <0>;
67			clock-frequency = <0>;
68		};
69
70		adc_op_clk: adc_op_clk{
71			compatible = "fixed-clock";
72			#clock-cells = <0>;
73			clock-frequency = <1000000>;
74		};
75	};
76
77	sram: sram@300000 {
78		compatible = "mmio-sram";
79		reg = <0x00300000 0x8000>;
80		#address-cells = <1>;
81		#size-cells = <1>;
82		ranges = <0 0x00300000 0x8000>;
83	};
84
85	ahb {
86		compatible = "simple-bus";
87		#address-cells = <1>;
88		#size-cells = <1>;
89		ranges;
90
91		apb {
92			compatible = "simple-bus";
93			#address-cells = <1>;
94			#size-cells = <1>;
95			ranges;
96
97			aic: interrupt-controller@fffff000 {
98				#interrupt-cells = <3>;
99				compatible = "atmel,at91rm9200-aic";
100				interrupt-controller;
101				reg = <0xfffff000 0x200>;
102				atmel,external-irqs = <31>;
103			};
104
105			matrix: matrix@ffffde00 {
106				compatible = "atmel,at91sam9x5-matrix", "syscon";
107				reg = <0xffffde00 0x100>;
108			};
109
110			pmecc: ecc-engine@ffffe000 {
111				compatible = "atmel,at91sam9g45-pmecc";
112				reg = <0xffffe000 0x600>,
113				      <0xffffe600 0x200>;
114			};
115
116			ramc0: ramc@ffffe800 {
117				compatible = "atmel,at91sam9g45-ddramc";
118				reg = <0xffffe800 0x200>;
119				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
120				clock-names = "ddrck";
121			};
122
123			smc: smc@ffffea00 {
124				compatible = "atmel,at91sam9260-smc", "syscon";
125				reg = <0xffffea00 0x200>;
126			};
127
128			pmc: pmc@fffffc00 {
129				compatible = "atmel,at91sam9x5-pmc", "syscon";
130				reg = <0xfffffc00 0x200>;
131				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
132				#clock-cells = <2>;
133				clocks = <&clk32k>, <&main_xtal>;
134				clock-names = "slow_clk", "main_xtal";
135			};
136
137			reset_controller: rstc@fffffe00 {
138				compatible = "atmel,at91sam9g45-rstc";
139				reg = <0xfffffe00 0x10>;
140				clocks = <&clk32k>;
141			};
142
143			shutdown_controller: shdwc@fffffe10 {
144				compatible = "atmel,at91sam9x5-shdwc";
145				reg = <0xfffffe10 0x10>;
146				clocks = <&clk32k>;
147			};
148
149			pit: timer@fffffe30 {
150				compatible = "atmel,at91sam9260-pit";
151				reg = <0xfffffe30 0xf>;
152				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
153				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
154			};
155
156			clk32k: sckc@fffffe50 {
157				compatible = "atmel,at91sam9x5-sckc";
158				reg = <0xfffffe50 0x4>;
159				clocks = <&slow_xtal>;
160				#clock-cells = <0>;
161			};
162
163			tcb0: timer@f8008000 {
164				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
165				#address-cells = <1>;
166				#size-cells = <0>;
167				reg = <0xf8008000 0x100>;
168				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
169				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
170				clock-names = "t0_clk", "slow_clk";
171			};
172
173			tcb1: timer@f800c000 {
174				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
175				#address-cells = <1>;
176				#size-cells = <0>;
177				reg = <0xf800c000 0x100>;
178				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
179				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
180				clock-names = "t0_clk", "slow_clk";
181			};
182
183			dma0: dma-controller@ffffec00 {
184				compatible = "atmel,at91sam9g45-dma";
185				reg = <0xffffec00 0x200>;
186				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
187				#dma-cells = <2>;
188				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
189				clock-names = "dma_clk";
190			};
191
192			dma1: dma-controller@ffffee00 {
193				compatible = "atmel,at91sam9g45-dma";
194				reg = <0xffffee00 0x200>;
195				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
196				#dma-cells = <2>;
197				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
198				clock-names = "dma_clk";
199			};
200
201			pinctrl: pinctrl@fffff400 {
202				#address-cells = <1>;
203				#size-cells = <1>;
204				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
205				ranges = <0xfffff400 0xfffff400 0x800>;
206
207				/* shared pinctrl settings */
208				dbgu {
209					pinctrl_dbgu: dbgu-0 {
210						atmel,pins =
211							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
212							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
213					};
214				};
215
216				ebi {
217					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
218						atmel,pins =
219							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
220							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
221							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
222							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
223							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
224							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
225							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
226							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
227					};
228
229					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
230						atmel,pins =
231							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
232							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
233							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
234							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
235							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
236							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
237							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
238							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
239					};
240
241					pinctrl_ebi_addr_nand: ebi-addr-0 {
242						atmel,pins =
243							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
244							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
245					};
246				};
247
248				usart0 {
249					pinctrl_usart0: usart0-0 {
250						atmel,pins =
251							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
252							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
253					};
254
255					pinctrl_usart0_rts: usart0_rts-0 {
256						atmel,pins =
257							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
258					};
259
260					pinctrl_usart0_cts: usart0_cts-0 {
261						atmel,pins =
262							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
263					};
264
265					pinctrl_usart0_sck: usart0_sck-0 {
266						atmel,pins =
267							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
268					};
269				};
270
271				usart1 {
272					pinctrl_usart1: usart1-0 {
273						atmel,pins =
274							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
275							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
276					};
277
278					pinctrl_usart1_rts: usart1_rts-0 {
279						atmel,pins =
280							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
281					};
282
283					pinctrl_usart1_cts: usart1_cts-0 {
284						atmel,pins =
285							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
286					};
287
288					pinctrl_usart1_sck: usart1_sck-0 {
289						atmel,pins =
290							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
291					};
292				};
293
294				usart2 {
295					pinctrl_usart2: usart2-0 {
296						atmel,pins =
297							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
298							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
299					};
300
301					pinctrl_usart2_rts: usart2_rts-0 {
302						atmel,pins =
303							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
304					};
305
306					pinctrl_usart2_cts: usart2_cts-0 {
307						atmel,pins =
308							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
309					};
310
311					pinctrl_usart2_sck: usart2_sck-0 {
312						atmel,pins =
313							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
314					};
315				};
316
317				uart0 {
318					pinctrl_uart0: uart0-0 {
319						atmel,pins =
320							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
321							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
322					};
323				};
324
325				uart1 {
326					pinctrl_uart1: uart1-0 {
327						atmel,pins =
328							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
329							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
330					};
331				};
332
333				nand {
334					pinctrl_nand_oe_we: nand-oe-we-0 {
335						atmel,pins =
336							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
337							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
338					};
339
340					pinctrl_nand_rb: nand-rb-0 {
341						atmel,pins =
342							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
343					};
344
345					pinctrl_nand_cs: nand-cs-0 {
346						atmel,pins =
347							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
348					};
349				};
350
351				mmc0 {
352					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
353						atmel,pins =
354							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
355							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
356							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
357					};
358
359					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
360						atmel,pins =
361							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
362							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
363							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
364					};
365				};
366
367				mmc1 {
368					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
369						atmel,pins =
370							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
371							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
372							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
373					};
374
375					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
376						atmel,pins =
377							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
378							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
379							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
380					};
381				};
382
383				ssc0 {
384					pinctrl_ssc0_tx: ssc0_tx-0 {
385						atmel,pins =
386							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
387							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
388							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
389					};
390
391					pinctrl_ssc0_rx: ssc0_rx-0 {
392						atmel,pins =
393							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
394							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
395							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
396					};
397				};
398
399				spi0 {
400					pinctrl_spi0: spi0-0 {
401						atmel,pins =
402							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
403							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
404							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
405					};
406				};
407
408				spi1 {
409					pinctrl_spi1: spi1-0 {
410						atmel,pins =
411							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
412							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
413							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
414					};
415				};
416
417				i2c0 {
418					pinctrl_i2c0: i2c0-0 {
419						atmel,pins =
420							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
421							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
422					};
423				};
424
425				i2c1 {
426					pinctrl_i2c1: i2c1-0 {
427						atmel,pins =
428							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
429							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
430					};
431				};
432
433				i2c2 {
434					pinctrl_i2c2: i2c2-0 {
435						atmel,pins =
436							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
437							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
438					};
439				};
440
441				i2c_gpio0 {
442					pinctrl_i2c_gpio0: i2c_gpio0-0 {
443						atmel,pins =
444							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
445							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
446					};
447				};
448
449				i2c_gpio1 {
450					pinctrl_i2c_gpio1: i2c_gpio1-0 {
451						atmel,pins =
452							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
453							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
454					};
455				};
456
457				i2c_gpio2 {
458					pinctrl_i2c_gpio2: i2c_gpio2-0 {
459						atmel,pins =
460							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
461							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
462					};
463				};
464
465				pwm0 {
466					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
467						atmel,pins =
468							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
469					};
470					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
471						atmel,pins =
472							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
473					};
474					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
475						atmel,pins =
476							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
477					};
478
479					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
480						atmel,pins =
481							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
482					};
483					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
484						atmel,pins =
485							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
486					};
487					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
488						atmel,pins =
489							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
490					};
491
492					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
493						atmel,pins =
494							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
495					};
496					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
497						atmel,pins =
498							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
499					};
500
501					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
502						atmel,pins =
503							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
504					};
505					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
506						atmel,pins =
507							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
508					};
509				};
510
511				tcb0 {
512					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
513						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
514					};
515
516					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
517						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
518					};
519
520					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
521						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
522					};
523
524					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
525						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
526					};
527
528					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
529						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
530					};
531
532					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
533						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
534					};
535
536					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
537						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
538					};
539
540					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
541						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
542					};
543
544					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
545						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
546					};
547				};
548
549				tcb1 {
550					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
551						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
552					};
553
554					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
555						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
556					};
557
558					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
559						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
560					};
561
562					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
563						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
564					};
565
566					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
567						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
568					};
569
570					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
571						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
572					};
573
574					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
575						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
576					};
577
578					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
579						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
580					};
581
582					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
583						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
584					};
585				};
586
587				pioA: gpio@fffff400 {
588					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
589					reg = <0xfffff400 0x200>;
590					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
591					#gpio-cells = <2>;
592					gpio-controller;
593					interrupt-controller;
594					#interrupt-cells = <2>;
595					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
596				};
597
598				pioB: gpio@fffff600 {
599					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
600					reg = <0xfffff600 0x200>;
601					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
602					#gpio-cells = <2>;
603					gpio-controller;
604					#gpio-lines = <19>;
605					interrupt-controller;
606					#interrupt-cells = <2>;
607					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
608				};
609
610				pioC: gpio@fffff800 {
611					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
612					reg = <0xfffff800 0x200>;
613					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
614					#gpio-cells = <2>;
615					gpio-controller;
616					interrupt-controller;
617					#interrupt-cells = <2>;
618					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
619				};
620
621				pioD: gpio@fffffa00 {
622					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
623					reg = <0xfffffa00 0x200>;
624					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
625					#gpio-cells = <2>;
626					gpio-controller;
627					#gpio-lines = <22>;
628					interrupt-controller;
629					#interrupt-cells = <2>;
630					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
631				};
632			};
633
634			ssc0: ssc@f0010000 {
635				compatible = "atmel,at91sam9g45-ssc";
636				reg = <0xf0010000 0x4000>;
637				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
638				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
639				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
640				dma-names = "tx", "rx";
641				pinctrl-names = "default";
642				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
643				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
644				clock-names = "pclk";
645				status = "disabled";
646			};
647
648			mmc0: mmc@f0008000 {
649				compatible = "atmel,hsmci";
650				reg = <0xf0008000 0x600>;
651				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
652				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
653				dma-names = "rxtx";
654				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
655				clock-names = "mci_clk";
656				#address-cells = <1>;
657				#size-cells = <0>;
658				status = "disabled";
659			};
660
661			mmc1: mmc@f000c000 {
662				compatible = "atmel,hsmci";
663				reg = <0xf000c000 0x600>;
664				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
665				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
666				dma-names = "rxtx";
667				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
668				clock-names = "mci_clk";
669				#address-cells = <1>;
670				#size-cells = <0>;
671				status = "disabled";
672			};
673
674			dbgu: serial@fffff200 {
675				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
676				reg = <0xfffff200 0x200>;
677				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
678				pinctrl-names = "default";
679				pinctrl-0 = <&pinctrl_dbgu>;
680				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
681				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
682				dma-names = "tx", "rx";
683				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
684				clock-names = "usart";
685				status = "disabled";
686			};
687
688			usart0: serial@f801c000 {
689				compatible = "atmel,at91sam9260-usart";
690				reg = <0xf801c000 0x200>;
691				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
692				pinctrl-names = "default";
693				pinctrl-0 = <&pinctrl_usart0>;
694				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
695				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
696				dma-names = "tx", "rx";
697				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
698				clock-names = "usart";
699				status = "disabled";
700			};
701
702			usart1: serial@f8020000 {
703				compatible = "atmel,at91sam9260-usart";
704				reg = <0xf8020000 0x200>;
705				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
706				pinctrl-names = "default";
707				pinctrl-0 = <&pinctrl_usart1>;
708				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
709				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
710				dma-names = "tx", "rx";
711				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
712				clock-names = "usart";
713				status = "disabled";
714			};
715
716			usart2: serial@f8024000 {
717				compatible = "atmel,at91sam9260-usart";
718				reg = <0xf8024000 0x200>;
719				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
720				pinctrl-names = "default";
721				pinctrl-0 = <&pinctrl_usart2>;
722				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
723				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
724				dma-names = "tx", "rx";
725				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
726				clock-names = "usart";
727				status = "disabled";
728			};
729
730			i2c0: i2c@f8010000 {
731				compatible = "atmel,at91sam9x5-i2c";
732				reg = <0xf8010000 0x100>;
733				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
734				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
735				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
736				dma-names = "tx", "rx";
737				#address-cells = <1>;
738				#size-cells = <0>;
739				pinctrl-names = "default";
740				pinctrl-0 = <&pinctrl_i2c0>;
741				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
742				status = "disabled";
743			};
744
745			i2c1: i2c@f8014000 {
746				compatible = "atmel,at91sam9x5-i2c";
747				reg = <0xf8014000 0x100>;
748				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
749				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
750				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
751				dma-names = "tx", "rx";
752				#address-cells = <1>;
753				#size-cells = <0>;
754				pinctrl-names = "default";
755				pinctrl-0 = <&pinctrl_i2c1>;
756				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
757				status = "disabled";
758			};
759
760			i2c2: i2c@f8018000 {
761				compatible = "atmel,at91sam9x5-i2c";
762				reg = <0xf8018000 0x100>;
763				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
764				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
765				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
766				dma-names = "tx", "rx";
767				#address-cells = <1>;
768				#size-cells = <0>;
769				pinctrl-names = "default";
770				pinctrl-0 = <&pinctrl_i2c2>;
771				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
772				status = "disabled";
773			};
774
775			uart0: serial@f8040000 {
776				compatible = "atmel,at91sam9260-usart";
777				reg = <0xf8040000 0x200>;
778				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
779				pinctrl-names = "default";
780				pinctrl-0 = <&pinctrl_uart0>;
781				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
782				clock-names = "usart";
783				status = "disabled";
784			};
785
786			uart1: serial@f8044000 {
787				compatible = "atmel,at91sam9260-usart";
788				reg = <0xf8044000 0x200>;
789				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
790				pinctrl-names = "default";
791				pinctrl-0 = <&pinctrl_uart1>;
792				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
793				clock-names = "usart";
794				status = "disabled";
795			};
796
797			adc0: adc@f804c000 {
798				compatible = "atmel,at91sam9x5-adc";
799				reg = <0xf804c000 0x100>;
800				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
801				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
802					 <&adc_op_clk>;
803				clock-names = "adc_clk", "adc_op_clk";
804				atmel,adc-use-external-triggers;
805				atmel,adc-channels-used = <0xffff>;
806				atmel,adc-vref = <3300>;
807				atmel,adc-startup-time = <40>;
808				atmel,adc-sample-hold-time = <11>;
809			};
810
811			spi0: spi@f0000000 {
812				#address-cells = <1>;
813				#size-cells = <0>;
814				compatible = "atmel,at91rm9200-spi";
815				reg = <0xf0000000 0x100>;
816				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
817				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
818				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
819				dma-names = "tx", "rx";
820				pinctrl-names = "default";
821				pinctrl-0 = <&pinctrl_spi0>;
822				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
823				clock-names = "spi_clk";
824				status = "disabled";
825			};
826
827			spi1: spi@f0004000 {
828				#address-cells = <1>;
829				#size-cells = <0>;
830				compatible = "atmel,at91rm9200-spi";
831				reg = <0xf0004000 0x100>;
832				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
833				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
834				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
835				dma-names = "tx", "rx";
836				pinctrl-names = "default";
837				pinctrl-0 = <&pinctrl_spi1>;
838				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
839				clock-names = "spi_clk";
840				status = "disabled";
841			};
842
843			usb2: gadget@f803c000 {
844				compatible = "atmel,at91sam9g45-udc";
845				reg = <0x00500000 0x80000
846				       0xf803c000 0x400>;
847				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
848				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
849				clock-names = "hclk", "pclk";
850				status = "disabled";
851			};
852
853			watchdog: watchdog@fffffe40 {
854				compatible = "atmel,at91sam9260-wdt";
855				reg = <0xfffffe40 0x10>;
856				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
857				clocks = <&clk32k>;
858				atmel,watchdog-type = "hardware";
859				atmel,reset-type = "all";
860				atmel,dbg-halt;
861				status = "disabled";
862			};
863
864			rtc: rtc@fffffeb0 {
865				compatible = "atmel,at91sam9x5-rtc";
866				reg = <0xfffffeb0 0x40>;
867				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
868				clocks = <&clk32k>;
869				status = "disabled";
870			};
871
872			pwm0: pwm@f8034000 {
873				compatible = "atmel,at91sam9rl-pwm";
874				reg = <0xf8034000 0x300>;
875				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
876				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
877				#pwm-cells = <3>;
878				status = "disabled";
879			};
880		};
881
882		usb0: ohci@600000 {
883			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
884			reg = <0x00600000 0x100000>;
885			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
886			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
887			clock-names = "ohci_clk", "hclk", "uhpck";
888			status = "disabled";
889		};
890
891		usb1: ehci@700000 {
892			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
893			reg = <0x00700000 0x100000>;
894			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
895			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
896			clock-names = "usb_clk", "ehci_clk";
897			status = "disabled";
898		};
899
900		ebi: ebi@10000000 {
901			compatible = "atmel,at91sam9x5-ebi";
902			#address-cells = <2>;
903			#size-cells = <1>;
904			atmel,smc = <&smc>;
905			atmel,matrix = <&matrix>;
906			reg = <0x10000000 0x60000000>;
907			ranges = <0x0 0x0 0x10000000 0x10000000
908				  0x1 0x0 0x20000000 0x10000000
909				  0x2 0x0 0x30000000 0x10000000
910				  0x3 0x0 0x40000000 0x10000000
911				  0x4 0x0 0x50000000 0x10000000
912				  0x5 0x0 0x60000000 0x10000000>;
913			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
914			status = "disabled";
915
916			nand_controller: nand-controller {
917				compatible = "atmel,at91sam9g45-nand-controller";
918				ecc-engine = <&pmecc>;
919				#address-cells = <2>;
920				#size-cells = <1>;
921				ranges;
922				status = "disabled";
923			};
924		};
925	};
926
927	i2c-gpio-0 {
928		compatible = "i2c-gpio";
929		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
930			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
931			>;
932		i2c-gpio,sda-open-drain;
933		i2c-gpio,scl-open-drain;
934		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
935		#address-cells = <1>;
936		#size-cells = <0>;
937		pinctrl-names = "default";
938		pinctrl-0 = <&pinctrl_i2c_gpio0>;
939		status = "disabled";
940	};
941
942	i2c-gpio-1 {
943		compatible = "i2c-gpio";
944		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
945			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
946			>;
947		i2c-gpio,sda-open-drain;
948		i2c-gpio,scl-open-drain;
949		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
950		#address-cells = <1>;
951		#size-cells = <0>;
952		pinctrl-names = "default";
953		pinctrl-0 = <&pinctrl_i2c_gpio1>;
954		status = "disabled";
955	};
956
957	i2c-gpio-2 {
958		compatible = "i2c-gpio";
959		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
960			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
961			>;
962		i2c-gpio,sda-open-drain;
963		i2c-gpio,scl-open-drain;
964		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
965		#address-cells = <1>;
966		#size-cells = <0>;
967		pinctrl-names = "default";
968		pinctrl-0 = <&pinctrl_i2c_gpio2>;
969		status = "disabled";
970	};
971};
972