1/* 2 * BSD LICENSE 3 * 4 * Copyright(c) 2014 Broadcom Corporation. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * * Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the 15 * distribution. 16 * * Neither the name of Broadcom Corporation nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <dt-bindings/interrupt-controller/arm-gic.h> 34#include <dt-bindings/interrupt-controller/irq.h> 35#include <dt-bindings/clock/bcm-cygnus.h> 36 37/ { 38 #address-cells = <1>; 39 #size-cells = <1>; 40 compatible = "brcm,cygnus"; 41 model = "Broadcom Cygnus SoC"; 42 interrupt-parent = <&gic>; 43 44 aliases { 45 ethernet0 = ð0; 46 }; 47 48 memory@0 { 49 device_type = "memory"; 50 reg = <0 0>; 51 }; 52 53 cpus { 54 #address-cells = <1>; 55 #size-cells = <0>; 56 57 cpu@0 { 58 device_type = "cpu"; 59 compatible = "arm,cortex-a9"; 60 next-level-cache = <&L2>; 61 reg = <0x0>; 62 }; 63 }; 64 65 /include/ "bcm-cygnus-clock.dtsi" 66 67 pmu { 68 compatible = "arm,cortex-a9-pmu"; 69 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 70 }; 71 72 core@19000000 { 73 compatible = "simple-bus"; 74 ranges = <0x00000000 0x19000000 0x1000000>; 75 #address-cells = <1>; 76 #size-cells = <1>; 77 78 timer@20200 { 79 compatible = "arm,cortex-a9-global-timer"; 80 reg = <0x20200 0x100>; 81 interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; 82 clocks = <&periph_clk>; 83 }; 84 85 gic: interrupt-controller@21000 { 86 compatible = "arm,cortex-a9-gic"; 87 #interrupt-cells = <3>; 88 #address-cells = <0>; 89 interrupt-controller; 90 reg = <0x21000 0x1000>, 91 <0x20100 0x100>; 92 }; 93 94 L2: cache-controller@22000 { 95 compatible = "arm,pl310-cache"; 96 reg = <0x22000 0x1000>; 97 cache-unified; 98 cache-level = <2>; 99 }; 100 }; 101 102 axi { 103 compatible = "simple-bus"; 104 ranges; 105 #address-cells = <1>; 106 #size-cells = <1>; 107 108 otp: otp@301c800 { 109 compatible = "brcm,ocotp"; 110 reg = <0x0301c800 0x2c>; 111 brcm,ocotp-size = <2048>; 112 status = "disabled"; 113 }; 114 115 pcie_phy: phy@301d0a0 { 116 compatible = "brcm,cygnus-pcie-phy"; 117 reg = <0x0301d0a0 0x14>; 118 #address-cells = <1>; 119 #size-cells = <0>; 120 121 pcie0_phy: phy@0 { 122 reg = <0>; 123 #phy-cells = <0>; 124 }; 125 126 pcie1_phy: phy@1 { 127 reg = <1>; 128 #phy-cells = <0>; 129 }; 130 }; 131 132 pinctrl: pinctrl@301d0c8 { 133 compatible = "brcm,cygnus-pinmux"; 134 reg = <0x0301d0c8 0x30>, 135 <0x0301d24c 0x2c>; 136 137 spi_0: spi_0 { 138 function = "spi0"; 139 groups = "spi0_grp"; 140 }; 141 142 spi_1: spi_1 { 143 function = "spi1"; 144 groups = "spi1_grp"; 145 }; 146 147 spi_2: spi_2 { 148 function = "spi2"; 149 groups = "spi2_grp"; 150 }; 151 }; 152 153 mailbox: mailbox@3024024 { 154 compatible = "brcm,iproc-mailbox"; 155 reg = <0x03024024 0x40>; 156 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 157 #interrupt-cells = <1>; 158 interrupt-controller; 159 #mbox-cells = <1>; 160 }; 161 162 gpio_crmu: gpio@3024800 { 163 compatible = "brcm,cygnus-crmu-gpio"; 164 reg = <0x03024800 0x50>, 165 <0x03024008 0x18>; 166 ngpios = <6>; 167 #gpio-cells = <2>; 168 gpio-controller; 169 interrupt-controller; 170 interrupt-parent = <&mailbox>; 171 interrupts = <0>; 172 }; 173 174 mdio: mdio@18002000 { 175 compatible = "brcm,iproc-mdio"; 176 reg = <0x18002000 0x8>; 177 #size-cells = <0>; 178 #address-cells = <1>; 179 status = "disabled"; 180 181 gphy0: ethernet-phy@0 { 182 reg = <0>; 183 }; 184 185 gphy1: ethernet-phy@1 { 186 reg = <1>; 187 }; 188 }; 189 190 switch: switch@18007000 { 191 compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; 192 reg = <0x18007000 0x1000>; 193 status = "disabled"; 194 195 ports { 196 #address-cells = <1>; 197 #size-cells = <0>; 198 199 port@0 { 200 reg = <0>; 201 phy-handle = <&gphy0>; 202 phy-mode = "rgmii"; 203 }; 204 205 port@1 { 206 reg = <1>; 207 phy-handle = <&gphy1>; 208 phy-mode = "rgmii"; 209 }; 210 211 port@8 { 212 reg = <8>; 213 label = "cpu"; 214 ethernet = <ð0>; 215 fixed-link { 216 speed = <1000>; 217 full-duplex; 218 }; 219 }; 220 }; 221 }; 222 223 i2c0: i2c@18008000 { 224 compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; 225 reg = <0x18008000 0x100>; 226 #address-cells = <1>; 227 #size-cells = <0>; 228 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 229 clock-frequency = <100000>; 230 status = "disabled"; 231 }; 232 233 wdt0: wdt@18009000 { 234 compatible = "arm,sp805" , "arm,primecell"; 235 reg = <0x18009000 0x1000>; 236 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 237 clocks = <&axi81_clk>, <&axi81_clk>; 238 clock-names = "wdog_clk", "apb_pclk"; 239 }; 240 241 gpio_ccm: gpio@1800a000 { 242 compatible = "brcm,cygnus-ccm-gpio"; 243 reg = <0x1800a000 0x50>, 244 <0x0301d164 0x20>; 245 ngpios = <24>; 246 #gpio-cells = <2>; 247 gpio-controller; 248 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 249 interrupt-controller; 250 }; 251 252 i2c1: i2c@1800b000 { 253 compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; 254 reg = <0x1800b000 0x100>; 255 #address-cells = <1>; 256 #size-cells = <0>; 257 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 258 clock-frequency = <100000>; 259 status = "disabled"; 260 }; 261 262 pcie0: pcie@18012000 { 263 compatible = "brcm,iproc-pcie"; 264 reg = <0x18012000 0x1000>; 265 266 #interrupt-cells = <1>; 267 interrupt-map-mask = <0 0 0 0>; 268 interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 269 270 linux,pci-domain = <0>; 271 272 bus-range = <0x00 0xff>; 273 274 #address-cells = <3>; 275 #size-cells = <2>; 276 device_type = "pci"; 277 ranges = <0x81000000 0 0 0x28000000 0 0x00010000 278 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; 279 280 phys = <&pcie0_phy>; 281 phy-names = "pcie-phy"; 282 283 status = "disabled"; 284 285 msi-parent = <&msi0>; 286 msi0: msi-controller { 287 compatible = "brcm,iproc-msi"; 288 msi-controller; 289 interrupt-parent = <&gic>; 290 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, 291 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, 292 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, 293 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 294 }; 295 }; 296 297 pcie1: pcie@18013000 { 298 compatible = "brcm,iproc-pcie"; 299 reg = <0x18013000 0x1000>; 300 301 #interrupt-cells = <1>; 302 interrupt-map-mask = <0 0 0 0>; 303 interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 304 305 linux,pci-domain = <1>; 306 307 bus-range = <0x00 0xff>; 308 309 #address-cells = <3>; 310 #size-cells = <2>; 311 device_type = "pci"; 312 ranges = <0x81000000 0 0 0x48000000 0 0x00010000 313 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; 314 315 phys = <&pcie1_phy>; 316 phy-names = "pcie-phy"; 317 318 status = "disabled"; 319 320 msi-parent = <&msi1>; 321 msi1: msi-controller { 322 compatible = "brcm,iproc-msi"; 323 msi-controller; 324 interrupt-parent = <&gic>; 325 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, 326 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, 327 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, 328 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 329 }; 330 }; 331 332 dma0: dma@18018000 { 333 compatible = "arm,pl330", "arm,primecell"; 334 reg = <0x18018000 0x1000>; 335 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, 336 <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, 337 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, 338 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, 339 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, 340 <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, 341 <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, 342 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, 343 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 344 clocks = <&apb_clk>; 345 clock-names = "apb_pclk"; 346 #dma-cells = <1>; 347 }; 348 349 uart0: serial@18020000 { 350 compatible = "snps,dw-apb-uart"; 351 reg = <0x18020000 0x100>; 352 reg-shift = <2>; 353 reg-io-width = <4>; 354 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 355 clocks = <&axi81_clk>; 356 clock-frequency = <100000000>; 357 status = "disabled"; 358 }; 359 360 uart1: serial@18021000 { 361 compatible = "snps,dw-apb-uart"; 362 reg = <0x18021000 0x100>; 363 reg-shift = <2>; 364 reg-io-width = <4>; 365 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 366 clocks = <&axi81_clk>; 367 clock-frequency = <100000000>; 368 status = "disabled"; 369 }; 370 371 uart2: serial@18022000 { 372 compatible = "snps,dw-apb-uart"; 373 reg = <0x18022000 0x100>; 374 reg-shift = <2>; 375 reg-io-width = <4>; 376 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 377 clocks = <&axi81_clk>; 378 clock-frequency = <100000000>; 379 status = "disabled"; 380 }; 381 382 uart3: serial@18023000 { 383 compatible = "snps,dw-apb-uart"; 384 reg = <0x18023000 0x100>; 385 reg-shift = <2>; 386 reg-io-width = <4>; 387 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; 388 clocks = <&axi81_clk>; 389 clock-frequency = <100000000>; 390 status = "disabled"; 391 }; 392 393 spi0: spi@18028000 { 394 compatible = "arm,pl022", "arm,primecell"; 395 reg = <0x18028000 0x1000>; 396 #address-cells = <1>; 397 #size-cells = <0>; 398 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; 399 pinctrl-0 = <&spi_0>; 400 clocks = <&axi81_clk>; 401 clock-names = "apb_pclk"; 402 status = "disabled"; 403 }; 404 405 spi1: spi@18029000 { 406 compatible = "arm,pl022", "arm,primecell"; 407 reg = <0x18029000 0x1000>; 408 #address-cells = <1>; 409 #size-cells = <0>; 410 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 411 pinctrl-0 = <&spi_1>; 412 clocks = <&axi81_clk>; 413 clock-names = "apb_pclk"; 414 status = "disabled"; 415 }; 416 417 spi2: spi@1802a000 { 418 compatible = "arm,pl022", "arm,primecell"; 419 reg = <0x1802a000 0x1000>; 420 #address-cells = <1>; 421 #size-cells = <0>; 422 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 423 pinctrl-0 = <&spi_2>; 424 clocks = <&axi81_clk>; 425 clock-names = "apb_pclk"; 426 status = "disabled"; 427 }; 428 429 rng: rng@18032000 { 430 compatible = "brcm,iproc-rng200"; 431 reg = <0x18032000 0x28>; 432 }; 433 434 sdhci0: sdhci@18041000 { 435 compatible = "brcm,sdhci-iproc-cygnus"; 436 reg = <0x18041000 0x100>; 437 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 438 clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; 439 bus-width = <4>; 440 sdhci,auto-cmd12; 441 status = "disabled"; 442 }; 443 444 eth0: ethernet@18042000 { 445 compatible = "brcm,amac"; 446 reg = <0x18042000 0x1000>, 447 <0x18110000 0x1000>; 448 reg-names = "amac_base", "idm_base"; 449 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; 450 status = "disabled"; 451 }; 452 453 sdhci1: sdhci@18043000 { 454 compatible = "brcm,sdhci-iproc-cygnus"; 455 reg = <0x18043000 0x100>; 456 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; 457 clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; 458 bus-width = <4>; 459 sdhci,auto-cmd12; 460 status = "disabled"; 461 }; 462 463 nand: nand@18046000 { 464 compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; 465 reg = <0x18046000 0x600>, <0xf8105408 0x600>, 466 <0x18046f00 0x20>; 467 reg-names = "nand", "iproc-idm", "iproc-ext"; 468 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 469 470 #address-cells = <1>; 471 #size-cells = <0>; 472 473 brcm,nand-has-wp; 474 }; 475 476 ehci0: usb@18048000 { 477 compatible = "generic-ehci"; 478 reg = <0x18048000 0x100>; 479 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 480 status = "disabled"; 481 }; 482 483 ohci0: usb@18048800 { 484 compatible = "generic-ohci"; 485 reg = <0x18048800 0x100>; 486 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 487 status = "disabled"; 488 }; 489 490 clcd: clcd@180a0000 { 491 compatible = "arm,pl111", "arm,primecell"; 492 reg = <0x180a0000 0x1000>; 493 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; 494 interrupt-names = "combined"; 495 clocks = <&axi41_clk>, <&apb_clk>; 496 clock-names = "clcdclk", "apb_pclk"; 497 status = "disabled"; 498 }; 499 500 v3d: v3d@180a2000 { 501 compatible = "brcm,cygnus-v3d"; 502 reg = <0x180a2000 0x1000>; 503 clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; 504 clock-names = "v3d_clk"; 505 interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; 506 status = "disabled"; 507 }; 508 509 vc4: gpu { 510 compatible = "brcm,cygnus-vc4"; 511 }; 512 513 gpio_asiu: gpio@180a5000 { 514 compatible = "brcm,cygnus-asiu-gpio"; 515 reg = <0x180a5000 0x668>; 516 ngpios = <146>; 517 #gpio-cells = <2>; 518 gpio-controller; 519 520 interrupt-controller; 521 interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; 522 gpio-ranges = <&pinctrl 0 42 1>, 523 <&pinctrl 1 44 3>, 524 <&pinctrl 4 48 1>, 525 <&pinctrl 5 50 3>, 526 <&pinctrl 8 126 1>, 527 <&pinctrl 9 155 1>, 528 <&pinctrl 10 152 1>, 529 <&pinctrl 11 154 1>, 530 <&pinctrl 12 153 1>, 531 <&pinctrl 13 127 3>, 532 <&pinctrl 16 140 1>, 533 <&pinctrl 17 145 7>, 534 <&pinctrl 24 130 10>, 535 <&pinctrl 34 141 4>, 536 <&pinctrl 38 54 1>, 537 <&pinctrl 39 56 3>, 538 <&pinctrl 42 60 3>, 539 <&pinctrl 45 64 3>, 540 <&pinctrl 48 68 2>, 541 <&pinctrl 50 84 6>, 542 <&pinctrl 56 94 6>, 543 <&pinctrl 62 72 1>, 544 <&pinctrl 63 70 1>, 545 <&pinctrl 64 80 1>, 546 <&pinctrl 65 74 3>, 547 <&pinctrl 68 78 1>, 548 <&pinctrl 69 82 1>, 549 <&pinctrl 70 156 17>, 550 <&pinctrl 87 104 12>, 551 <&pinctrl 99 102 2>, 552 <&pinctrl 101 90 4>, 553 <&pinctrl 105 116 6>, 554 <&pinctrl 111 100 2>, 555 <&pinctrl 113 122 4>, 556 <&pinctrl 123 11 1>, 557 <&pinctrl 124 38 4>, 558 <&pinctrl 128 43 1>, 559 <&pinctrl 129 47 1>, 560 <&pinctrl 130 49 1>, 561 <&pinctrl 131 53 1>, 562 <&pinctrl 132 55 1>, 563 <&pinctrl 133 59 1>, 564 <&pinctrl 134 63 1>, 565 <&pinctrl 135 67 1>, 566 <&pinctrl 136 71 1>, 567 <&pinctrl 137 73 1>, 568 <&pinctrl 138 77 1>, 569 <&pinctrl 139 79 1>, 570 <&pinctrl 140 81 1>, 571 <&pinctrl 141 83 1>, 572 <&pinctrl 142 10 1>; 573 }; 574 575 ts_adc_syscon: ts_adc_syscon@180a6000 { 576 compatible = "brcm,iproc-ts-adc-syscon", "syscon"; 577 reg = <0x180a6000 0xc30>; 578 }; 579 580 touchscreen: touchscreen@180a6000 { 581 compatible = "brcm,iproc-touchscreen"; 582 #address-cells = <1>; 583 #size-cells = <1>; 584 ts_syscon = <&ts_adc_syscon>; 585 clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; 586 clock-names = "tsc_clk"; 587 interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; 588 status = "disabled"; 589 }; 590 591 adc: adc@180a6000 { 592 compatible = "brcm,iproc-static-adc"; 593 #io-channel-cells = <1>; 594 adc-syscon = <&ts_adc_syscon>; 595 clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; 596 clock-names = "tsc_clk"; 597 interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; 598 status = "disabled"; 599 }; 600 601 pwm: pwm@180aa500 { 602 compatible = "brcm,kona-pwm"; 603 reg = <0x180aa500 0xc4>; 604 #pwm-cells = <3>; 605 clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; 606 status = "disabled"; 607 }; 608 609 keypad: keypad@180ac000 { 610 compatible = "brcm,bcm-keypad"; 611 reg = <0x180ac000 0x14c>; 612 interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; 613 clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>; 614 clock-names = "peri_clk"; 615 clock-frequency = <31250>; 616 pull-up-enabled; 617 col-debounce-filter-period = <0>; 618 status-debounce-filter-period = <0>; 619 row-output-enabled; 620 status = "disabled"; 621 }; 622 }; 623}; 624