1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Samsung's Exynos3250 based Rinato board device tree source 4 * 5 * Copyright (c) 2014 Samsung Electronics Co., Ltd. 6 * http://www.samsung.com 7 * 8 * Device tree source file for Samsung's Rinato board which is based on 9 * Samsung Exynos3250 SoC. 10 */ 11 12/dts-v1/; 13#include "exynos3250.dtsi" 14#include "exynos4412-ppmu-common.dtsi" 15#include <dt-bindings/input/input.h> 16#include <dt-bindings/gpio/gpio.h> 17#include <dt-bindings/clock/samsung,s2mps11.h> 18 19/ { 20 model = "Samsung Rinato board"; 21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; 22 23 aliases { 24 i2c7 = &i2c_max77836; 25 }; 26 27 chosen { 28 stdout-path = &serial_1; 29 }; 30 31 memory@40000000 { 32 device_type = "memory"; 33 reg = <0x40000000 0x1ff00000>; 34 }; 35 36 firmware@205f000 { 37 compatible = "samsung,secure-firmware"; 38 reg = <0x0205F000 0x1000>; 39 }; 40 41 gpio-keys { 42 compatible = "gpio-keys"; 43 44 power-key { 45 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; 46 linux,code = <KEY_POWER>; 47 label = "power key"; 48 debounce-interval = <10>; 49 wakeup-source; 50 }; 51 }; 52 53 wlan_pwrseq: mshc1-pwrseq { 54 compatible = "mmc-pwrseq-simple"; 55 reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; 56 }; 57 58 i2c_max77836: i2c-gpio-0 { 59 compatible = "i2c-gpio"; 60 sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 61 scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 62 #address-cells = <1>; 63 #size-cells = <0>; 64 65 max77836: pmic@25 { 66 compatible = "maxim,max77836"; 67 interrupt-parent = <&gpx1>; 68 interrupts = <5 IRQ_TYPE_NONE>; 69 reg = <0x25>; 70 wakeup-source; 71 72 muic: max77836-muic { 73 compatible = "maxim,max77836-muic"; 74 }; 75 76 regulators { 77 compatible = "maxim,max77836-regulator"; 78 safeout_reg: SAFEOUT { 79 regulator-name = "SAFEOUT"; 80 }; 81 82 charger_reg: CHARGER { 83 regulator-name = "CHARGER"; 84 regulator-min-microamp = <45000>; 85 regulator-max-microamp = <475000>; 86 regulator-boot-on; 87 }; 88 89 motor_reg: LDO1 { 90 regulator-name = "MOT_2.7V"; 91 regulator-min-microvolt = <1100000>; 92 regulator-max-microvolt = <2700000>; 93 }; 94 95 LDO2 { 96 regulator-name = "UNUSED_LDO2"; 97 regulator-min-microvolt = <800000>; 98 regulator-max-microvolt = <3950000>; 99 }; 100 }; 101 102 charger { 103 compatible = "maxim,max77836-charger"; 104 105 maxim,constant-uvolt = <4350000>; 106 maxim,fast-charge-uamp = <225000>; 107 maxim,eoc-uamp = <7500>; 108 maxim,ovp-uvolt = <6500000>; 109 }; 110 }; 111 }; 112 113 haptics { 114 compatible = "regulator-haptic"; 115 haptic-supply = <&motor_reg>; 116 min-microvolt = <1100000>; 117 max-microvolt = <2700000>; 118 }; 119 120 thermal-zones { 121 cpu_thermal: cpu-thermal { 122 cooling-maps { 123 map0 { 124 /* Corresponds to 500MHz */ 125 cooling-device = <&cpu0 5 5>, 126 <&cpu1 5 5>; 127 }; 128 map1 { 129 /* Corresponds to 200MHz */ 130 cooling-device = <&cpu0 8 8>, 131 <&cpu1 8 8>; 132 }; 133 }; 134 }; 135 }; 136}; 137 138&adc { 139 vdd-supply = <&ldo3_reg>; 140 status = "okay"; 141 assigned-clocks = <&cmu CLK_SCLK_TSADC>; 142 assigned-clock-rates = <6000000>; 143 144 thermistor-ap { 145 compatible = "murata,ncp15wb473"; 146 pullup-uv = <1800000>; 147 pullup-ohm = <100000>; 148 pulldown-ohm = <100000>; 149 io-channels = <&adc 0>; 150 }; 151 152 thermistor-battery { 153 compatible = "murata,ncp15wb473"; 154 pullup-uv = <1800000>; 155 pullup-ohm = <100000>; 156 pulldown-ohm = <100000>; 157 io-channels = <&adc 1>; 158 }; 159}; 160 161&bus_dmc { 162 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; 163 vdd-supply = <&buck1_reg>; 164 status = "okay"; 165}; 166 167&bus_leftbus { 168 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; 169 vdd-supply = <&buck3_reg>; 170 status = "okay"; 171}; 172 173&bus_rightbus { 174 devfreq = <&bus_leftbus>; 175 status = "okay"; 176}; 177 178&bus_lcd0 { 179 devfreq = <&bus_leftbus>; 180 status = "okay"; 181}; 182 183&bus_fsys { 184 devfreq = <&bus_leftbus>; 185 status = "okay"; 186}; 187 188&bus_mcuisp { 189 devfreq = <&bus_leftbus>; 190 status = "okay"; 191}; 192 193&bus_isp { 194 devfreq = <&bus_leftbus>; 195 status = "okay"; 196}; 197 198&bus_peril { 199 devfreq = <&bus_leftbus>; 200 status = "okay"; 201}; 202 203&bus_mfc { 204 devfreq = <&bus_leftbus>; 205 status = "okay"; 206}; 207 208&cmu { 209 clocks = <&xusbxti>; 210}; 211 212&cpu0 { 213 cpu0-supply = <&buck2_reg>; 214}; 215 216&exynos_usbphy { 217 status = "okay"; 218 vbus-supply = <&safeout_reg>; 219}; 220 221&hsotg { 222 vusb_d-supply = <&ldo15_reg>; 223 vusb_a-supply = <&ldo12_reg>; 224 dr_mode = "peripheral"; 225 status = "okay"; 226}; 227 228&dsi_0 { 229 vddcore-supply = <&ldo6_reg>; 230 vddio-supply = <&ldo6_reg>; 231 samsung,burst-clock-frequency = <250000000>; 232 samsung,esc-clock-frequency = <20000000>; 233 samsung,pll-clock-frequency = <24000000>; 234 status = "okay"; 235 236 panel@0 { 237 compatible = "samsung,s6e63j0x03"; 238 reg = <0>; 239 vdd3-supply = <&ldo16_reg>; 240 vci-supply = <&ldo20_reg>; 241 reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; 242 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; 243 }; 244}; 245 246&fimd { 247 status = "okay"; 248 249 i80-if-timings { 250 cs-setup = <0>; 251 wr-setup = <0>; 252 wr-act = <1>; 253 wr-hold = <0>; 254 }; 255}; 256 257&gpu { 258 mali-supply = <&buck3_reg>; 259 status = "okay"; 260}; 261 262&i2c_0 { 263 #address-cells = <1>; 264 #size-cells = <0>; 265 samsung,i2c-sda-delay = <100>; 266 samsung,i2c-slave-addr = <0x10>; 267 samsung,i2c-max-bus-freq = <100000>; 268 status = "okay"; 269 270 pmic@66 { 271 compatible = "samsung,s2mps14-pmic"; 272 interrupt-parent = <&gpx0>; 273 interrupts = <7 IRQ_TYPE_LEVEL_LOW>; 274 reg = <0x66>; 275 wakeup-source; 276 277 s2mps14_osc: clocks { 278 compatible = "samsung,s2mps14-clk"; 279 #clock-cells = <1>; 280 clock-output-names = "s2mps14_ap", "unused", 281 "s2mps14_bt"; 282 }; 283 284 regulators { 285 ldo1_reg: LDO1 { 286 regulator-name = "VAP_ALIVE_1.0V"; 287 regulator-min-microvolt = <1000000>; 288 regulator-max-microvolt = <1000000>; 289 regulator-always-on; 290 291 regulator-state-mem { 292 regulator-on-in-suspend; 293 }; 294 }; 295 296 ldo2_reg: LDO2 { 297 regulator-name = "VAP_M1_1.2V"; 298 regulator-min-microvolt = <1200000>; 299 regulator-max-microvolt = <1200000>; 300 regulator-always-on; 301 302 regulator-state-mem { 303 regulator-off-in-suspend; 304 }; 305 }; 306 307 ldo3_reg: LDO3 { 308 regulator-name = "VCC_AP_1.8V"; 309 regulator-min-microvolt = <1800000>; 310 regulator-max-microvolt = <1800000>; 311 regulator-always-on; 312 313 regulator-state-mem { 314 regulator-off-in-suspend; 315 }; 316 }; 317 318 ldo4_reg: LDO4 { 319 regulator-name = "VAP_AVDD_PLL1"; 320 regulator-min-microvolt = <1800000>; 321 regulator-max-microvolt = <1800000>; 322 regulator-always-on; 323 324 regulator-state-mem { 325 regulator-off-in-suspend; 326 }; 327 }; 328 329 ldo5_reg: LDO5 { 330 regulator-name = "VAP_PLL_ISO_1.0V"; 331 regulator-min-microvolt = <1000000>; 332 regulator-max-microvolt = <1000000>; 333 regulator-always-on; 334 335 regulator-state-mem { 336 regulator-off-in-suspend; 337 }; 338 }; 339 340 ldo6_reg: LDO6 { 341 regulator-name = "VAP_VMIPI_1.0V"; 342 regulator-min-microvolt = <1000000>; 343 regulator-max-microvolt = <1000000>; 344 regulator-always-on; 345 346 regulator-state-mem { 347 regulator-off-in-suspend; 348 }; 349 }; 350 351 ldo7_reg: LDO7 { 352 regulator-name = "VAP_AVDD_1.8V"; 353 regulator-min-microvolt = <1800000>; 354 regulator-max-microvolt = <1800000>; 355 regulator-always-on; 356 357 regulator-state-mem { 358 regulator-off-in-suspend; 359 }; 360 }; 361 362 ldo8_reg: LDO8 { 363 regulator-name = "VAP_USB_3.0V"; 364 regulator-min-microvolt = <3000000>; 365 regulator-max-microvolt = <3000000>; 366 regulator-always-on; 367 368 regulator-state-mem { 369 regulator-off-in-suspend; 370 }; 371 }; 372 373 ldo9_reg: LDO9 { 374 regulator-name = "V_LPDDR_1.2V"; 375 regulator-min-microvolt = <1200000>; 376 regulator-max-microvolt = <1200000>; 377 regulator-always-on; 378 379 regulator-state-mem { 380 regulator-on-in-suspend; 381 }; 382 }; 383 384 ldo10_reg: LDO10 { 385 regulator-name = "UNUSED_LDO10"; 386 regulator-min-microvolt = <1000000>; 387 regulator-max-microvolt = <1000000>; 388 389 regulator-state-mem { 390 regulator-off-in-suspend; 391 }; 392 }; 393 394 ldo11_reg: LDO11 { 395 regulator-name = "V_EMMC_1.8V"; 396 regulator-min-microvolt = <1800000>; 397 regulator-max-microvolt = <1800000>; 398 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 399 }; 400 401 ldo12_reg: LDO12 { 402 regulator-name = "V_EMMC_2.8V"; 403 regulator-min-microvolt = <2800000>; 404 regulator-max-microvolt = <2800000>; 405 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 406 }; 407 408 ldo13_reg: LDO13 { 409 regulator-name = "CAM_AVDD_2.8V"; 410 regulator-min-microvolt = <2800000>; 411 regulator-max-microvolt = <2800000>; 412 413 regulator-state-mem { 414 regulator-off-in-suspend; 415 }; 416 }; 417 418 ldo14_reg: LDO14 { 419 regulator-name = "UNUSED_LDO14"; 420 regulator-min-microvolt = <2700000>; 421 regulator-max-microvolt = <2700000>; 422 423 regulator-state-mem { 424 regulator-off-in-suspend; 425 }; 426 }; 427 428 ldo15_reg: LDO15 { 429 regulator-name = "TSP_AVDD_3.3V"; 430 regulator-min-microvolt = <3300000>; 431 regulator-max-microvolt = <3300000>; 432 433 regulator-state-mem { 434 regulator-off-in-suspend; 435 }; 436 }; 437 438 ldo16_reg: LDO16 { 439 regulator-name = "LCD_VDD_3.3V"; 440 regulator-min-microvolt = <3300000>; 441 regulator-max-microvolt = <3300000>; 442 443 regulator-state-mem { 444 regulator-off-in-suspend; 445 }; 446 }; 447 448 ldo17_reg: LDO17 { 449 regulator-name = "V_IRLED_3.3V"; 450 regulator-min-microvolt = <3300000>; 451 regulator-max-microvolt = <3300000>; 452 453 regulator-state-mem { 454 regulator-off-in-suspend; 455 }; 456 }; 457 458 ldo18_reg: LDO18 { 459 regulator-name = "CAM_AF_2.8V"; 460 regulator-min-microvolt = <2800000>; 461 regulator-max-microvolt = <2800000>; 462 463 regulator-state-mem { 464 regulator-off-in-suspend; 465 }; 466 }; 467 468 ldo19_reg: LDO19 { 469 regulator-name = "TSP_VDD_1.8V"; 470 regulator-min-microvolt = <1800000>; 471 regulator-max-microvolt = <1800000>; 472 473 regulator-state-mem { 474 regulator-off-in-suspend; 475 }; 476 }; 477 478 ldo20_reg: LDO20 { 479 regulator-name = "LCD_VDD_1.8V"; 480 regulator-min-microvolt = <1800000>; 481 regulator-max-microvolt = <1800000>; 482 483 regulator-state-mem { 484 regulator-off-in-suspend; 485 }; 486 }; 487 488 ldo21_reg: LDO21 { 489 regulator-name = "CAM_IO_1.8V"; 490 regulator-min-microvolt = <1800000>; 491 regulator-max-microvolt = <1800000>; 492 493 regulator-state-mem { 494 regulator-off-in-suspend; 495 }; 496 }; 497 498 ldo22_reg: LDO22 { 499 regulator-name = "CAM_DVDD_1.2V"; 500 regulator-min-microvolt = <1200000>; 501 regulator-max-microvolt = <1200000>; 502 503 regulator-state-mem { 504 regulator-off-in-suspend; 505 }; 506 }; 507 508 ldo23_reg: LDO23 { 509 regulator-name = "HRM_VCC_1.8V"; 510 regulator-min-microvolt = <1800000>; 511 regulator-max-microvolt = <1800000>; 512 regulator-always-on; 513 }; 514 515 ldo24_reg: LDO24 { 516 regulator-name = "HRM_VCC_3.3V"; 517 regulator-min-microvolt = <3000000>; 518 regulator-max-microvolt = <3000000>; 519 520 regulator-state-mem { 521 regulator-off-in-suspend; 522 }; 523 }; 524 525 ldo25_reg: LDO25 { 526 regulator-name = "UNUSED_LDO25"; 527 regulator-min-microvolt = <3000000>; 528 regulator-max-microvolt = <3000000>; 529 530 regulator-state-mem { 531 regulator-off-in-suspend; 532 }; 533 }; 534 535 buck1_reg: BUCK1 { 536 regulator-name = "VAP_MIF_1.0V"; 537 regulator-min-microvolt = <800000>; 538 regulator-max-microvolt = <900000>; 539 regulator-always-on; 540 541 regulator-state-mem { 542 regulator-off-in-suspend; 543 }; 544 }; 545 546 buck2_reg: BUCK2 { 547 regulator-name = "VAP_ARM_1.0V"; 548 regulator-min-microvolt = <850000>; 549 regulator-max-microvolt = <1150000>; 550 regulator-always-on; 551 552 regulator-state-mem { 553 regulator-off-in-suspend; 554 }; 555 }; 556 557 buck3_reg: BUCK3 { 558 regulator-name = "VAP_INT3D_1.0V"; 559 regulator-min-microvolt = <850000>; 560 regulator-max-microvolt = <1000000>; 561 regulator-always-on; 562 563 regulator-state-mem { 564 regulator-off-in-suspend; 565 }; 566 }; 567 568 buck4_reg: BUCK4 { 569 regulator-name = "VCC_SUB_1.95V"; 570 regulator-min-microvolt = <1950000>; 571 regulator-max-microvolt = <1950000>; 572 regulator-always-on; 573 574 regulator-state-mem { 575 regulator-on-in-suspend; 576 }; 577 }; 578 579 buck5_reg: BUCK5 { 580 regulator-name = "VCC_SUB_1.35V"; 581 regulator-min-microvolt = <1350000>; 582 regulator-max-microvolt = <1350000>; 583 regulator-always-on; 584 585 regulator-state-mem { 586 regulator-on-in-suspend; 587 }; 588 }; 589 }; 590 }; 591}; 592 593&i2c_1 { 594 #address-cells = <1>; 595 #size-cells = <0>; 596 samsung,i2c-sda-delay = <100>; 597 samsung,i2c-slave-addr = <0x10>; 598 samsung,i2c-max-bus-freq = <400000>; 599 status = "okay"; 600 601 fuelgauge@36 { 602 compatible = "maxim,max77836-battery"; 603 interrupt-parent = <&gpx1>; 604 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 605 reg = <0x36>; 606 }; 607}; 608 609&i2s2 { 610 status = "okay"; 611}; 612 613&jpeg { 614 status = "okay"; 615}; 616 617&mshc_0 { 618 broken-cd; 619 non-removable; 620 cap-mmc-highspeed; 621 desc-num = <4>; 622 mmc-hs200-1_8v; 623 card-detect-delay = <200>; 624 vmmc-supply = <&ldo12_reg>; 625 clock-frequency = <100000000>; 626 max-frequency = <100000000>; 627 samsung,dw-mshc-ciu-div = <1>; 628 samsung,dw-mshc-sdr-timing = <0 1>; 629 samsung,dw-mshc-ddr-timing = <1 2>; 630 pinctrl-names = "default"; 631 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; 632 bus-width = <8>; 633 status = "okay"; 634}; 635 636&mshc_1 { 637 status = "okay"; 638 639 #address-cells = <1>; 640 #size-cells = <0>; 641 642 non-removable; 643 cap-sd-highspeed; 644 cap-sdio-irq; 645 keep-power-in-suspend; 646 samsung,dw-mshc-ciu-div = <1>; 647 samsung,dw-mshc-sdr-timing = <0 1>; 648 samsung,dw-mshc-ddr-timing = <1 2>; 649 pinctrl-names = "default"; 650 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; 651 bus-width = <4>; 652 653 mmc-pwrseq = <&wlan_pwrseq>; 654 655 brcmf: wifi@1 { 656 compatible = "brcm,bcm4334-fmac"; 657 reg = <1>; 658 659 interrupt-parent = <&gpx1>; 660 interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; 661 interrupt-names = "host-wake"; 662 }; 663}; 664 665&serial_0 { 666 assigned-clocks = <&cmu CLK_SCLK_UART0>; 667 assigned-clock-rates = <100000000>; 668 status = "okay"; 669 670 bluetooth { 671 compatible = "brcm,bcm4330-bt"; 672 max-speed = <3000000>; 673 shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; 674 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; 675 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; 676 clocks = <&s2mps14_osc S2MPS11_CLK_BT>; 677 }; 678}; 679 680&serial_1 { 681 status = "okay"; 682}; 683 684&tmu { 685 vtmu-supply = <&ldo7_reg>; 686 status = "okay"; 687}; 688 689&rtc { 690 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; 691 clock-names = "rtc", "rtc_src"; 692 status = "okay"; 693}; 694 695&xusbxti { 696 clock-frequency = <24000000>; 697}; 698 699&pinctrl_0 { 700 pinctrl-names = "default"; 701 pinctrl-0 = <&initial0 &sleep0>; 702 703 initial0: initial-state { 704 PIN_IN(gpa1-4, DOWN, LV1); 705 PIN_IN(gpa1-5, DOWN, LV1); 706 707 PIN_IN(gpc0-0, DOWN, LV1); 708 PIN_IN(gpc0-1, DOWN, LV1); 709 PIN_IN(gpc0-2, DOWN, LV1); 710 PIN_IN(gpc0-3, DOWN, LV1); 711 PIN_IN(gpc0-4, DOWN, LV1); 712 713 PIN_IN(gpd0-0, DOWN, LV1); 714 PIN_IN(gpd0-1, DOWN, LV1); 715 }; 716 717 sleep0: sleep-state { 718 PIN_SLP(gpa0-0, INPUT, DOWN); 719 PIN_SLP(gpa0-1, INPUT, DOWN); 720 PIN_SLP(gpa0-2, INPUT, DOWN); 721 PIN_SLP(gpa0-3, INPUT, DOWN); 722 PIN_SLP(gpa0-4, INPUT, DOWN); 723 PIN_SLP(gpa0-5, INPUT, DOWN); 724 PIN_SLP(gpa0-6, INPUT, DOWN); 725 PIN_SLP(gpa0-7, INPUT, DOWN); 726 727 PIN_SLP(gpa1-0, INPUT, DOWN); 728 PIN_SLP(gpa1-1, INPUT, DOWN); 729 PIN_SLP(gpa1-2, INPUT, DOWN); 730 PIN_SLP(gpa1-3, INPUT, DOWN); 731 PIN_SLP(gpa1-4, INPUT, DOWN); 732 PIN_SLP(gpa1-5, INPUT, DOWN); 733 734 PIN_SLP(gpb-0, PREV, NONE); 735 PIN_SLP(gpb-1, PREV, NONE); 736 PIN_SLP(gpb-2, PREV, NONE); 737 PIN_SLP(gpb-3, PREV, NONE); 738 PIN_SLP(gpb-4, INPUT, DOWN); 739 PIN_SLP(gpb-5, INPUT, DOWN); 740 PIN_SLP(gpb-6, INPUT, DOWN); 741 PIN_SLP(gpb-7, INPUT, DOWN); 742 743 PIN_SLP(gpc0-0, INPUT, DOWN); 744 PIN_SLP(gpc0-1, INPUT, DOWN); 745 PIN_SLP(gpc0-2, INPUT, DOWN); 746 PIN_SLP(gpc0-3, INPUT, DOWN); 747 PIN_SLP(gpc0-4, INPUT, DOWN); 748 749 PIN_SLP(gpc1-0, INPUT, DOWN); 750 PIN_SLP(gpc1-1, INPUT, DOWN); 751 PIN_SLP(gpc1-2, INPUT, DOWN); 752 PIN_SLP(gpc1-3, INPUT, DOWN); 753 PIN_SLP(gpc1-4, INPUT, DOWN); 754 755 PIN_SLP(gpd0-0, INPUT, DOWN); 756 PIN_SLP(gpd0-1, INPUT, DOWN); 757 PIN_SLP(gpd0-2, INPUT, NONE); 758 PIN_SLP(gpd0-3, INPUT, NONE); 759 760 PIN_SLP(gpd1-0, INPUT, NONE); 761 PIN_SLP(gpd1-1, INPUT, NONE); 762 PIN_SLP(gpd1-2, INPUT, NONE); 763 PIN_SLP(gpd1-3, INPUT, NONE); 764 }; 765}; 766 767&pinctrl_1 { 768 pinctrl-names = "default"; 769 pinctrl-0 = <&initial1 &sleep1>; 770 771 initial1: initial-state { 772 PIN_IN(gpe0-6, DOWN, LV1); 773 PIN_IN(gpe0-7, DOWN, LV1); 774 775 PIN_IN(gpe1-0, DOWN, LV1); 776 PIN_IN(gpe1-3, DOWN, LV1); 777 PIN_IN(gpe1-4, DOWN, LV1); 778 PIN_IN(gpe1-5, DOWN, LV1); 779 PIN_IN(gpe1-6, DOWN, LV1); 780 781 PIN_IN(gpk2-0, DOWN, LV1); 782 PIN_IN(gpk2-1, DOWN, LV1); 783 PIN_IN(gpk2-2, DOWN, LV1); 784 PIN_IN(gpk2-3, DOWN, LV1); 785 PIN_IN(gpk2-4, DOWN, LV1); 786 PIN_IN(gpk2-5, DOWN, LV1); 787 PIN_IN(gpk2-6, DOWN, LV1); 788 789 PIN_IN(gpm0-0, DOWN, LV1); 790 PIN_IN(gpm0-1, DOWN, LV1); 791 PIN_IN(gpm0-2, DOWN, LV1); 792 PIN_IN(gpm0-3, DOWN, LV1); 793 PIN_IN(gpm0-4, DOWN, LV1); 794 PIN_IN(gpm0-5, DOWN, LV1); 795 PIN_IN(gpm0-6, DOWN, LV1); 796 PIN_IN(gpm0-7, DOWN, LV1); 797 798 PIN_IN(gpm1-0, DOWN, LV1); 799 PIN_IN(gpm1-1, DOWN, LV1); 800 PIN_IN(gpm1-2, DOWN, LV1); 801 PIN_IN(gpm1-3, DOWN, LV1); 802 PIN_IN(gpm1-4, DOWN, LV1); 803 PIN_IN(gpm1-5, DOWN, LV1); 804 PIN_IN(gpm1-6, DOWN, LV1); 805 806 PIN_IN(gpm2-0, DOWN, LV1); 807 PIN_IN(gpm2-1, DOWN, LV1); 808 809 PIN_IN(gpm3-0, DOWN, LV1); 810 PIN_IN(gpm3-1, DOWN, LV1); 811 PIN_IN(gpm3-2, DOWN, LV1); 812 PIN_IN(gpm3-3, DOWN, LV1); 813 PIN_IN(gpm3-4, DOWN, LV1); 814 815 PIN_IN(gpm4-1, DOWN, LV1); 816 PIN_IN(gpm4-2, DOWN, LV1); 817 PIN_IN(gpm4-3, DOWN, LV1); 818 PIN_IN(gpm4-4, DOWN, LV1); 819 PIN_IN(gpm4-5, DOWN, LV1); 820 PIN_IN(gpm4-6, DOWN, LV1); 821 PIN_IN(gpm4-7, DOWN, LV1); 822 }; 823 824 sleep1: sleep-state { 825 PIN_SLP(gpe0-0, PREV, NONE); 826 PIN_SLP(gpe0-1, PREV, NONE); 827 PIN_SLP(gpe0-2, INPUT, DOWN); 828 PIN_SLP(gpe0-3, INPUT, UP); 829 PIN_SLP(gpe0-4, INPUT, DOWN); 830 PIN_SLP(gpe0-5, INPUT, DOWN); 831 PIN_SLP(gpe0-6, INPUT, DOWN); 832 PIN_SLP(gpe0-7, INPUT, DOWN); 833 834 PIN_SLP(gpe1-0, INPUT, DOWN); 835 PIN_SLP(gpe1-1, PREV, NONE); 836 PIN_SLP(gpe1-2, INPUT, DOWN); 837 PIN_SLP(gpe1-3, INPUT, DOWN); 838 PIN_SLP(gpe1-4, INPUT, DOWN); 839 PIN_SLP(gpe1-5, INPUT, DOWN); 840 PIN_SLP(gpe1-6, INPUT, DOWN); 841 PIN_SLP(gpe1-7, INPUT, NONE); 842 843 PIN_SLP(gpe2-0, INPUT, NONE); 844 PIN_SLP(gpe2-1, INPUT, NONE); 845 PIN_SLP(gpe2-2, INPUT, NONE); 846 847 PIN_SLP(gpk0-0, INPUT, DOWN); 848 PIN_SLP(gpk0-1, INPUT, DOWN); 849 PIN_SLP(gpk0-2, OUT0, NONE); 850 PIN_SLP(gpk0-3, INPUT, DOWN); 851 PIN_SLP(gpk0-4, INPUT, DOWN); 852 PIN_SLP(gpk0-5, INPUT, DOWN); 853 PIN_SLP(gpk0-6, INPUT, DOWN); 854 PIN_SLP(gpk0-7, INPUT, DOWN); 855 856 PIN_SLP(gpk1-0, INPUT, DOWN); 857 PIN_SLP(gpk1-1, INPUT, DOWN); 858 PIN_SLP(gpk1-2, INPUT, DOWN); 859 PIN_SLP(gpk1-3, INPUT, DOWN); 860 PIN_SLP(gpk1-4, INPUT, DOWN); 861 PIN_SLP(gpk1-5, INPUT, DOWN); 862 PIN_SLP(gpk1-6, INPUT, DOWN); 863 864 PIN_SLP(gpk2-0, INPUT, DOWN); 865 PIN_SLP(gpk2-1, INPUT, DOWN); 866 PIN_SLP(gpk2-2, INPUT, DOWN); 867 PIN_SLP(gpk2-3, INPUT, DOWN); 868 PIN_SLP(gpk2-4, INPUT, DOWN); 869 PIN_SLP(gpk2-5, INPUT, DOWN); 870 PIN_SLP(gpk2-6, INPUT, DOWN); 871 872 PIN_SLP(gpl0-0, INPUT, DOWN); 873 PIN_SLP(gpl0-1, INPUT, DOWN); 874 PIN_SLP(gpl0-2, INPUT, DOWN); 875 PIN_SLP(gpl0-3, INPUT, DOWN); 876 877 PIN_SLP(gpm0-0, INPUT, DOWN); 878 PIN_SLP(gpm0-1, INPUT, DOWN); 879 PIN_SLP(gpm0-2, INPUT, DOWN); 880 PIN_SLP(gpm0-3, INPUT, DOWN); 881 PIN_SLP(gpm0-4, INPUT, DOWN); 882 PIN_SLP(gpm0-5, INPUT, DOWN); 883 PIN_SLP(gpm0-6, INPUT, DOWN); 884 PIN_SLP(gpm0-7, INPUT, DOWN); 885 886 PIN_SLP(gpm1-0, INPUT, DOWN); 887 PIN_SLP(gpm1-1, INPUT, DOWN); 888 PIN_SLP(gpm1-2, INPUT, DOWN); 889 PIN_SLP(gpm1-3, INPUT, DOWN); 890 PIN_SLP(gpm1-4, INPUT, DOWN); 891 PIN_SLP(gpm1-5, INPUT, DOWN); 892 PIN_SLP(gpm1-6, INPUT, DOWN); 893 894 PIN_SLP(gpm2-0, INPUT, DOWN); 895 PIN_SLP(gpm2-1, INPUT, DOWN); 896 PIN_SLP(gpm2-2, INPUT, DOWN); 897 PIN_SLP(gpm2-3, INPUT, DOWN); 898 PIN_SLP(gpm2-4, INPUT, DOWN); 899 900 PIN_SLP(gpm3-0, INPUT, DOWN); 901 PIN_SLP(gpm3-1, INPUT, DOWN); 902 PIN_SLP(gpm3-2, INPUT, DOWN); 903 PIN_SLP(gpm3-3, INPUT, DOWN); 904 PIN_SLP(gpm3-4, INPUT, DOWN); 905 PIN_SLP(gpm3-5, INPUT, DOWN); 906 PIN_SLP(gpm3-6, INPUT, DOWN); 907 PIN_SLP(gpm3-7, INPUT, DOWN); 908 909 PIN_SLP(gpm4-0, INPUT, DOWN); 910 PIN_SLP(gpm4-1, INPUT, DOWN); 911 PIN_SLP(gpm4-2, INPUT, DOWN); 912 PIN_SLP(gpm4-3, INPUT, DOWN); 913 PIN_SLP(gpm4-4, INPUT, DOWN); 914 PIN_SLP(gpm4-5, INPUT, DOWN); 915 PIN_SLP(gpm4-6, INPUT, DOWN); 916 PIN_SLP(gpm4-7, INPUT, DOWN); 917 }; 918}; 919