1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3#include "imx28.dtsi"
4
5/ {
6	model = "Bluegiga APX4 Development Kit";
7	compatible = "bluegiga,apx4devkit", "fsl,imx28";
8
9	memory@40000000 {
10		device_type = "memory";
11		reg = <0x40000000 0x04000000>;
12	};
13
14	apb@80000000 {
15		apbh@80000000 {
16			nand-controller@8000c000 {
17				pinctrl-names = "default";
18				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
19				status = "okay";
20			};
21
22			ssp0: spi@80010000 {
23				compatible = "fsl,imx28-mmc";
24				pinctrl-names = "default";
25				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
26				bus-width = <4>;
27				status = "okay";
28			};
29
30			ssp2: spi@80014000 {
31				compatible = "fsl,imx28-mmc";
32				pinctrl-names = "default";
33				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
34				bus-width = <4>;
35				status = "okay";
36			};
37
38			pinctrl@80018000 {
39				pinctrl-names = "default";
40				pinctrl-0 = <&hog_pins_a>;
41
42				hog_pins_a: hog@0 {
43					reg = <0>;
44					fsl,pinmux-ids = <
45						MX28_PAD_GPMI_CE1N__GPIO_0_17
46						MX28_PAD_GPMI_RDY1__GPIO_0_21
47						MX28_PAD_SSP2_MISO__GPIO_2_18
48						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
49						MX28_PAD_PWM3__GPIO_3_28
50						MX28_PAD_LCD_RESET__GPIO_3_30
51						MX28_PAD_JTAG_RTCK__GPIO_4_20
52					>;
53					fsl,drive-strength = <MXS_DRIVE_4mA>;
54					fsl,voltage = <MXS_VOLTAGE_HIGH>;
55					fsl,pull-up = <MXS_PULL_DISABLE>;
56				};
57
58				lcdif_pins_apx4: lcdif-apx4@0 {
59					reg = <0>;
60					fsl,pinmux-ids = <
61						MX28_PAD_LCD_RD_E__LCD_VSYNC
62						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
63						MX28_PAD_LCD_RS__LCD_DOTCLK
64						MX28_PAD_LCD_CS__LCD_ENABLE
65					>;
66					fsl,drive-strength = <MXS_DRIVE_4mA>;
67					fsl,voltage = <MXS_VOLTAGE_HIGH>;
68					fsl,pull-up = <MXS_PULL_DISABLE>;
69				};
70
71				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
72					reg = <0>;
73					fsl,pinmux-ids = <
74						MX28_PAD_SSP0_DATA4__SSP2_D0
75						MX28_PAD_SSP0_DATA5__SSP2_D3
76						MX28_PAD_SSP0_DATA6__SSP2_CMD
77						MX28_PAD_SSP0_DATA7__SSP2_SCK
78						MX28_PAD_SSP2_SS1__SSP2_D1
79						MX28_PAD_SSP2_SS2__SSP2_D2
80					>;
81					fsl,drive-strength = <MXS_DRIVE_8mA>;
82					fsl,voltage = <MXS_VOLTAGE_HIGH>;
83					fsl,pull-up = <MXS_PULL_ENABLE>;
84				};
85
86				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
87					reg = <0>;
88					fsl,pinmux-ids = <
89						MX28_PAD_SSP0_DATA7__SSP2_SCK
90					>;
91					fsl,drive-strength = <MXS_DRIVE_12mA>;
92					fsl,pull-up = <MXS_PULL_DISABLE>;
93				};
94			};
95
96			lcdif@80030000 {
97				pinctrl-names = "default";
98				pinctrl-0 = <&lcdif_24bit_pins_a
99					     &lcdif_pins_apx4>;
100				display = <&display0>;
101				status = "okay";
102
103				display0: display0 {
104					bits-per-pixel = <32>;
105					bus-width = <24>;
106
107					display-timings {
108						native-mode = <&timing0>;
109						timing0: timing0 {
110							clock-frequency = <30000000>;
111							hactive = <800>;
112							vactive = <480>;
113							hback-porch = <88>;
114							hfront-porch = <40>;
115							vback-porch = <32>;
116							vfront-porch = <13>;
117							hsync-len = <48>;
118							vsync-len = <3>;
119							hsync-active = <1>;
120							vsync-active = <1>;
121							de-active = <1>;
122							pixelclk-active = <0>;
123						};
124					};
125				};
126			};
127		};
128
129		apbx@80040000 {
130			saif0: saif@80042000 {
131				pinctrl-names = "default";
132				pinctrl-0 = <&saif0_pins_a>;
133				status = "okay";
134			};
135
136			saif1: saif@80046000 {
137				pinctrl-names = "default";
138				pinctrl-0 = <&saif1_pins_a>;
139				fsl,saif-master = <&saif0>;
140				status = "okay";
141			};
142
143			i2c0: i2c@80058000 {
144				pinctrl-names = "default";
145				pinctrl-0 = <&i2c0_pins_a>;
146				status = "okay";
147
148				sgtl5000: codec@a {
149					compatible = "fsl,sgtl5000";
150					reg = <0x0a>;
151					#sound-dai-cells = <0>;
152					VDDA-supply = <&reg_3p3v>;
153					VDDIO-supply = <&reg_3p3v>;
154					clocks = <&saif0>;
155				};
156
157				pcf8563: rtc@51 {
158					compatible = "phg,pcf8563";
159					reg = <0x51>;
160				};
161			};
162
163			duart: serial@80074000 {
164				pinctrl-names = "default";
165				pinctrl-0 = <&duart_pins_a>;
166				status = "okay";
167			};
168
169			auart0: serial@8006a000 {
170				pinctrl-names = "default";
171				pinctrl-0 = <&auart0_pins_a>;
172				status = "okay";
173			};
174
175			auart1: serial@8006c000 {
176				pinctrl-names = "default";
177				pinctrl-0 = <&auart1_2pins_a>;
178				status = "okay";
179			};
180
181			auart2: serial@8006e000 {
182				pinctrl-names = "default";
183				pinctrl-0 = <&auart2_2pins_a>;
184				status = "okay";
185			};
186
187			usbphy1: usbphy@8007e000 {
188				pinctrl-names = "default";
189				pinctrl-0 = <&usb1_pins_a>;
190				status = "okay";
191			};
192		};
193	};
194
195	ahb@80080000 {
196		usb1: usb@80090000 {
197		      status = "okay";
198		};
199
200		mac0: ethernet@800f0000 {
201			phy-mode = "rmii";
202			pinctrl-names = "default";
203			pinctrl-0 = <&mac0_pins_a>;
204			status = "okay";
205		};
206	};
207
208	regulators {
209		compatible = "simple-bus";
210		#address-cells = <1>;
211		#size-cells = <0>;
212
213		reg_3p3v: regulator@0 {
214			compatible = "regulator-fixed";
215			reg = <0>;
216			regulator-name = "3P3V";
217			regulator-min-microvolt = <3300000>;
218			regulator-max-microvolt = <3300000>;
219			regulator-always-on;
220		};
221	};
222
223	sound {
224		compatible = "bluegiga,apx4devkit-sgtl5000",
225			     "fsl,mxs-audio-sgtl5000";
226		model = "apx4devkit-sgtl5000";
227		saif-controllers = <&saif0 &saif1>;
228		audio-codec = <&sgtl5000>;
229	};
230
231	leds {
232		compatible = "gpio-leds";
233
234		user {
235			label = "Heartbeat";
236			gpios = <&gpio3 28 0>;
237			linux,default-trigger = "heartbeat";
238		};
239	};
240};
241