1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
4 * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
5 */
6
7#include <dt-bindings/input/input.h>
8#include <dt-bindings/gpio/gpio.h>
9#include "imx28.dtsi"
10
11/ {
12	model = "Eukrea Electromatique MBMX28LC";
13	compatible = "eukrea,mbmx28lc", "fsl,imx28";
14
15	backlight {
16		compatible = "pwm-backlight";
17		pwms = <&pwm 4 1000000>;
18		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
19		default-brightness-level = <10>;
20	};
21
22	button-sw3 {
23		compatible = "gpio-keys";
24		pinctrl-names = "default";
25		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
26
27		sw3 {
28			label = "SW3";
29			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
30			linux,code = <BTN_MISC>;
31			wakeup-source;
32		};
33	};
34
35	button-sw4 {
36		compatible = "gpio-keys";
37		pinctrl-names = "default";
38		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
39
40		sw4 {
41			label = "SW4";
42			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
43			linux,code = <BTN_MISC>;
44			wakeup-source;
45		};
46	};
47
48	led-d6 {
49		compatible = "gpio-leds";
50		pinctrl-names = "default";
51		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
52
53		led1 {
54			label = "d6";
55			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
56			linux,default-trigger = "heartbeat";
57		};
58	};
59
60	led-d7 {
61		compatible = "gpio-leds";
62		pinctrl-names = "default";
63		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
64
65		led1 {
66			label = "d7";
67			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
68			linux,default-trigger = "default-on";
69		};
70	};
71
72	regulators {
73		compatible = "simple-bus";
74		#address-cells = <1>;
75		#size-cells = <0>;
76
77		reg_3p3v: regulator@0 {
78			compatible = "regulator-fixed";
79			reg = <0>;
80			regulator-name = "3P3V";
81			regulator-min-microvolt = <3300000>;
82			regulator-max-microvolt = <3300000>;
83			regulator-always-on;
84		};
85
86		reg_lcd_3v3: regulator@1 {
87			compatible = "regulator-fixed";
88			reg = <1>;
89			pinctrl-names = "default";
90			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
91			regulator-name = "lcd-3v3";
92			regulator-min-microvolt = <3300000>;
93			regulator-max-microvolt = <3300000>;
94			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
95			enable-active-high;
96		};
97
98		reg_usb0_vbus: regulator@2 {
99			compatible = "regulator-fixed";
100			reg = <2>;
101			pinctrl-names = "default";
102			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
103			regulator-name = "usb0_vbus";
104			regulator-min-microvolt = <5000000>;
105			regulator-max-microvolt = <5000000>;
106			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
107			enable-active-high;
108		};
109
110		reg_usb1_vbus: regulator@3 {
111			compatible = "regulator-fixed";
112			reg = <3>;
113			pinctrl-names = "default";
114			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
115			regulator-name = "usb1_vbus";
116			regulator-min-microvolt = <5000000>;
117			regulator-max-microvolt = <5000000>;
118			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
119			enable-active-high;
120		};
121	};
122
123	sound {
124		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
125			     "fsl,mxs-audio-sgtl5000";
126		model = "imx28-mbmx28lc-sgtl5000";
127		saif-controllers = <&saif0 &saif1>;
128		audio-codec = <&sgtl5000>;
129	};
130};
131
132&duart {
133	pinctrl-names = "default";
134	pinctrl-0 = <&duart_4pins_a>;
135	status = "okay";
136};
137
138&i2c0 {
139	pinctrl-names = "default";
140	pinctrl-0 = <&i2c0_pins_a>;
141	status = "okay";
142
143	sgtl5000: codec@a {
144		compatible = "fsl,sgtl5000";
145		reg = <0x0a>;
146		#sound-dai-cells = <0>;
147		VDDA-supply = <&reg_3p3v>;
148		VDDIO-supply = <&reg_3p3v>;
149		clocks = <&saif0>;
150	};
151};
152
153&lcdif {
154	pinctrl-names = "default";
155	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
156	lcd-supply = <&reg_lcd_3v3>;
157	display = <&display0>;
158	status = "okay";
159
160	display0: display0 {
161		model = "43WVF1G-0";
162		bits-per-pixel = <16>;
163		bus-width = <18>;
164
165		display-timings {
166			native-mode = <&timing0>;
167			timing0: timing0 {
168				clock-frequency = <9072000>;
169				hactive = <480>;
170				vactive = <272>;
171				hback-porch = <10>;
172				hfront-porch = <5>;
173				vback-porch = <8>;
174				vfront-porch = <8>;
175				hsync-len = <40>;
176				vsync-len = <10>;
177				hsync-active = <0>;
178				vsync-active = <0>;
179				de-active = <1>;
180				pixelclk-active = <1>;
181			};
182		};
183	};
184};
185
186&lradc {
187	fsl,lradc-touchscreen-wires = <4>;
188	status = "okay";
189};
190
191&pinctrl {
192	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
193		reg = <0>;
194		fsl,pinmux-ids = <
195			MX28_PAD_LCD_D21__GPIO_1_21
196		>;
197		fsl,drive-strength = <MXS_DRIVE_4mA>;
198		fsl,voltage = <MXS_VOLTAGE_HIGH>;
199		fsl,pull-up = <MXS_PULL_DISABLE>;
200	};
201
202	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
203		reg = <0>;
204		fsl,pinmux-ids = <
205			MX28_PAD_LCD_D20__GPIO_1_20
206		>;
207		fsl,drive-strength = <MXS_DRIVE_4mA>;
208		fsl,voltage = <MXS_VOLTAGE_HIGH>;
209		fsl,pull-up = <MXS_PULL_DISABLE>;
210	};
211
212	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
213		reg = <0>;
214		fsl,pinmux-ids = <
215			MX28_PAD_LCD_VSYNC__LCD_VSYNC
216			MX28_PAD_LCD_HSYNC__LCD_HSYNC
217			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
218			MX28_PAD_LCD_ENABLE__LCD_ENABLE
219		>;
220		fsl,drive-strength = <MXS_DRIVE_4mA>;
221		fsl,voltage = <MXS_VOLTAGE_HIGH>;
222		fsl,pull-up = <MXS_PULL_DISABLE>;
223	};
224
225	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
226		reg = <0>;
227		fsl,pinmux-ids = <
228			MX28_PAD_LCD_D23__GPIO_1_23
229		>;
230		fsl,drive-strength = <MXS_DRIVE_4mA>;
231		fsl,voltage = <MXS_VOLTAGE_HIGH>;
232		fsl,pull-up = <MXS_PULL_DISABLE>;
233	};
234
235	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
236		reg = <0>;
237		fsl,pinmux-ids = <
238			MX28_PAD_LCD_D22__GPIO_1_22
239		>;
240		fsl,drive-strength = <MXS_DRIVE_4mA>;
241		fsl,voltage = <MXS_VOLTAGE_HIGH>;
242		fsl,pull-up = <MXS_PULL_DISABLE>;
243	};
244
245	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
246		reg = <0>;
247		fsl,pinmux-ids = <
248			MX28_PAD_LCD_RESET__GPIO_3_30
249		>;
250		fsl,drive-strength = <MXS_DRIVE_4mA>;
251		fsl,voltage = <MXS_VOLTAGE_HIGH>;
252		fsl,pull-up = <MXS_PULL_DISABLE>;
253	};
254
255	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
256		reg = <0>;
257		fsl,pinmux-ids = <
258			MX28_PAD_LCD_D18__GPIO_1_18
259		>;
260		fsl,drive-strength = <MXS_DRIVE_4mA>;
261		fsl,voltage = <MXS_VOLTAGE_HIGH>;
262		fsl,pull-up = <MXS_PULL_DISABLE>;
263	};
264
265	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
266		reg = <0>;
267		fsl,pinmux-ids = <
268			MX28_PAD_LCD_D19__GPIO_1_19
269		>;
270		fsl,drive-strength = <MXS_DRIVE_4mA>;
271		fsl,voltage = <MXS_VOLTAGE_HIGH>;
272		fsl,pull-up = <MXS_PULL_DISABLE>;
273	};
274};
275
276&pwm {
277	pinctrl-names = "default";
278	pinctrl-0 = <&pwm4_pins_a>;
279	status = "okay";
280};
281
282&saif0 {
283	pinctrl-names = "default";
284	pinctrl-0 = <&saif0_pins_a>;
285	status = "okay";
286};
287
288&saif1 {
289	pinctrl-names = "default";
290	pinctrl-0 = <&saif1_pins_a>;
291	fsl,saif-master = <&saif0>;
292	status = "okay";
293};
294
295&ssp0 {
296	compatible = "fsl,imx28-mmc";
297	pinctrl-names = "default";
298	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
299	bus-width = <4>;
300	cd-inverted;
301	status = "okay";
302};
303
304&usb0 {
305	disable-over-current;
306	vbus-supply = <&reg_usb0_vbus>;
307	status = "okay";
308	pinctrl-names = "default";
309	pinctrl-0 = <&usb0_id_pins_b>;
310};
311
312&usb1 {
313	vbus-supply = <&reg_usb1_vbus>;
314	status = "okay";
315};
316
317&usbphy0 {
318	status = "okay";
319};
320
321&usbphy1 {
322	status = "okay";
323};
324