1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2011 Freescale Semiconductor, Inc.
4// Copyright 2011 Linaro Ltd.
5
6/dts-v1/;
7#include "imx51.dtsi"
8
9/ {
10	model = "Freescale i.MX51 Babbage Board";
11	compatible = "fsl,imx51-babbage", "fsl,imx51";
12
13	chosen {
14		stdout-path = &uart1;
15	};
16
17	memory@90000000 {
18		device_type = "memory";
19		reg = <0x90000000 0x20000000>;
20	};
21
22	ckih1 {
23		clock-frequency = <22579200>;
24	};
25
26	clk_osc: clk-osc {
27		compatible = "fixed-clock";
28		#clock-cells = <0>;
29		clock-frequency = <26000000>;
30	};
31
32	clk_osc_gate: clk-osc-gate {
33		compatible = "gpio-gate-clock";
34		pinctrl-names = "default";
35		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
36		clocks = <&clk_osc>;
37		#clock-cells = <0>;
38		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
39	};
40
41	clk_audio: clk-audio {
42		compatible = "gpio-gate-clock";
43		pinctrl-names = "default";
44		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
45		clocks = <&clk_osc_gate>;
46		#clock-cells = <0>;
47		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
48	};
49
50	clk_usb: clk-usb {
51		compatible = "gpio-gate-clock";
52		pinctrl-names = "default";
53		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
54		clocks = <&clk_osc_gate>;
55		#clock-cells = <0>;
56		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
57	};
58
59	display1: disp1 {
60		compatible = "fsl,imx-parallel-display";
61		#address-cells = <1>;
62		#size-cells = <0>;
63		interface-pix-fmt = "rgb24";
64		pinctrl-names = "default";
65		pinctrl-0 = <&pinctrl_ipu_disp1>;
66
67		port@0 {
68		reg = <0>;
69
70			display0_in: endpoint {
71				remote-endpoint = <&ipu_di0_disp1>;
72			};
73		};
74
75		port@1 {
76			reg = <1>;
77
78			parallel_display_out: endpoint {
79				remote-endpoint = <&tfp410_in>;
80			};
81		};
82	};
83
84	display2: disp2 {
85		compatible = "fsl,imx-parallel-display";
86		interface-pix-fmt = "rgb565";
87		pinctrl-names = "default";
88		pinctrl-0 = <&pinctrl_ipu_disp2>;
89		status = "disabled";
90		display-timings {
91			native-mode = <&timing1>;
92			timing1: claawvga {
93				clock-frequency = <27000000>;
94				hactive = <800>;
95				vactive = <480>;
96				hback-porch = <40>;
97				hfront-porch = <60>;
98				vback-porch = <10>;
99				vfront-porch = <10>;
100				hsync-len = <20>;
101				vsync-len = <10>;
102				hsync-active = <0>;
103				vsync-active = <0>;
104				de-active = <1>;
105				pixelclk-active = <0>;
106			};
107		};
108
109		port {
110			display1_in: endpoint {
111				remote-endpoint = <&ipu_di1_disp2>;
112			};
113		};
114	};
115
116	dvi-connector {
117		compatible = "dvi-connector";
118		digital;
119
120		port {
121			dvi_connector_in: endpoint {
122				remote-endpoint = <&tfp410_out>;
123			};
124		};
125	};
126
127	dvi-encoder {
128		compatible = "ti,tfp410";
129
130		ports {
131			#address-cells = <1>;
132			#size-cells = <0>;
133
134			port@0 {
135				reg = <0>;
136
137				tfp410_in: endpoint {
138					remote-endpoint = <&parallel_display_out>;
139				};
140			};
141
142			port@1 {
143				reg = <1>;
144
145				tfp410_out: endpoint {
146					remote-endpoint = <&dvi_connector_in>;
147				};
148			};
149		};
150	};
151
152	gpio-keys {
153		compatible = "gpio-keys";
154		pinctrl-names = "default";
155		pinctrl-0 = <&pinctrl_gpio_keys>;
156
157		power {
158			label = "Power Button";
159			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
160			linux,code = <KEY_POWER>;
161			wakeup-source;
162		};
163	};
164
165	leds {
166		compatible = "gpio-leds";
167		pinctrl-names = "default";
168		pinctrl-0 = <&pinctrl_gpio_leds>;
169
170		led-diagnostic {
171			label = "diagnostic";
172			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
173		};
174	};
175
176	regulators {
177		compatible = "simple-bus";
178		#address-cells = <1>;
179		#size-cells = <0>;
180
181		reg_hub_reset: regulator@0 {
182			compatible = "regulator-fixed";
183			pinctrl-names = "default";
184			pinctrl-0 = <&pinctrl_usbotgreg>;
185			reg = <0>;
186			regulator-name = "hub_reset";
187			regulator-min-microvolt = <5000000>;
188			regulator-max-microvolt = <5000000>;
189			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
190			enable-active-high;
191		};
192	};
193
194	sound {
195		compatible = "fsl,imx51-babbage-sgtl5000",
196			     "fsl,imx-audio-sgtl5000";
197		model = "imx51-babbage-sgtl5000";
198		ssi-controller = <&ssi2>;
199		audio-codec = <&sgtl5000>;
200		audio-routing =
201			"MIC_IN", "Mic Jack",
202			"Mic Jack", "Mic Bias",
203			"Headphone Jack", "HP_OUT";
204		mux-int-port = <2>;
205		mux-ext-port = <3>;
206	};
207
208	usbphy1: usbphy1 {
209		compatible = "usb-nop-xceiv";
210		pinctrl-names = "default";
211		pinctrl-0 = <&pinctrl_usbh1reg>;
212		clocks = <&clk_usb>;
213		clock-names = "main_clk";
214		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
215		vcc-supply = <&vusb_reg>;
216		#phy-cells = <0>;
217	};
218};
219
220&audmux {
221	pinctrl-names = "default";
222	pinctrl-0 = <&pinctrl_audmux>;
223	status = "okay";
224};
225
226&ecspi1 {
227	pinctrl-names = "default";
228	pinctrl-0 = <&pinctrl_ecspi1>;
229	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
230		   <&gpio4 25 GPIO_ACTIVE_LOW>;
231	status = "okay";
232
233	pmic: mc13892@0 {
234		compatible = "fsl,mc13892";
235		pinctrl-names = "default";
236		pinctrl-0 = <&pinctrl_pmic>;
237		spi-max-frequency = <6000000>;
238		spi-cs-high;
239		reg = <0>;
240		interrupt-parent = <&gpio1>;
241		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
242		fsl,mc13xxx-uses-adc;
243		fsl,mc13xxx-uses-rtc;
244
245		regulators {
246			sw1_reg: sw1 {
247				regulator-min-microvolt = <600000>;
248				regulator-max-microvolt = <1375000>;
249				regulator-boot-on;
250				regulator-always-on;
251			};
252
253			sw2_reg: sw2 {
254				regulator-min-microvolt = <900000>;
255				regulator-max-microvolt = <1850000>;
256				regulator-boot-on;
257				regulator-always-on;
258			};
259
260			sw3_reg: sw3 {
261				regulator-min-microvolt = <1100000>;
262				regulator-max-microvolt = <1850000>;
263				regulator-boot-on;
264				regulator-always-on;
265			};
266
267			sw4_reg: sw4 {
268				regulator-min-microvolt = <1100000>;
269				regulator-max-microvolt = <1850000>;
270				regulator-boot-on;
271				regulator-always-on;
272			};
273
274			vpll_reg: vpll {
275				regulator-min-microvolt = <1050000>;
276				regulator-max-microvolt = <1800000>;
277				regulator-boot-on;
278				regulator-always-on;
279			};
280
281			vdig_reg: vdig {
282				regulator-min-microvolt = <1650000>;
283				regulator-max-microvolt = <1650000>;
284				regulator-boot-on;
285			};
286
287			vsd_reg: vsd {
288				regulator-min-microvolt = <1800000>;
289				regulator-max-microvolt = <3150000>;
290			};
291
292			vusb_reg: vusb {
293				regulator-boot-on;
294			};
295
296			vusb2_reg: vusb2 {
297				regulator-min-microvolt = <2400000>;
298				regulator-max-microvolt = <2775000>;
299				regulator-boot-on;
300				regulator-always-on;
301			};
302
303			vvideo_reg: vvideo {
304				regulator-min-microvolt = <2775000>;
305				regulator-max-microvolt = <2775000>;
306			};
307
308			vaudio_reg: vaudio {
309				regulator-min-microvolt = <2300000>;
310				regulator-max-microvolt = <3000000>;
311			};
312
313			vcam_reg: vcam {
314				regulator-min-microvolt = <2500000>;
315				regulator-max-microvolt = <3000000>;
316			};
317
318			vgen1_reg: vgen1 {
319				regulator-min-microvolt = <1200000>;
320				regulator-max-microvolt = <1200000>;
321			};
322
323			vgen2_reg: vgen2 {
324				regulator-min-microvolt = <1200000>;
325				regulator-max-microvolt = <3150000>;
326				regulator-always-on;
327			};
328
329			vgen3_reg: vgen3 {
330				regulator-min-microvolt = <1800000>;
331				regulator-max-microvolt = <2900000>;
332				regulator-always-on;
333			};
334		};
335	};
336
337	flash: at45db321d@1 {
338		#address-cells = <1>;
339		#size-cells = <1>;
340		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
341		spi-max-frequency = <25000000>;
342		reg = <1>;
343
344		partition@0 {
345			label = "U-Boot";
346			reg = <0x0 0x40000>;
347			read-only;
348		};
349
350		partition@40000 {
351			label = "Kernel";
352			reg = <0x40000 0x3c0000>;
353		};
354	};
355};
356
357&esdhc1 {
358	pinctrl-names = "default";
359	pinctrl-0 = <&pinctrl_esdhc1>;
360	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
361	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
362	status = "okay";
363};
364
365&esdhc2 {
366	pinctrl-names = "default";
367	pinctrl-0 = <&pinctrl_esdhc2>;
368	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
369	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
370	status = "okay";
371};
372
373&fec {
374	pinctrl-names = "default";
375	pinctrl-0 = <&pinctrl_fec>;
376	phy-mode = "mii";
377	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
378	phy-reset-duration = <1>;
379	status = "okay";
380};
381
382&i2c1 {
383	pinctrl-names = "default";
384	pinctrl-0 = <&pinctrl_i2c1>;
385	status = "okay";
386};
387
388&i2c2 {
389	pinctrl-names = "default";
390	pinctrl-0 = <&pinctrl_i2c2>;
391	status = "okay";
392
393	sgtl5000: codec@a {
394		compatible = "fsl,sgtl5000";
395		reg = <0x0a>;
396		#sound-dai-cells = <0>;
397		clocks = <&clk_audio>;
398		VDDA-supply = <&vdig_reg>;
399		VDDIO-supply = <&vvideo_reg>;
400	};
401};
402
403&ipu_di0_disp1 {
404	remote-endpoint = <&display0_in>;
405};
406
407&ipu_di1_disp2 {
408	remote-endpoint = <&display1_in>;
409};
410
411&kpp {
412	pinctrl-names = "default";
413	pinctrl-0 = <&pinctrl_kpp>;
414	linux,keymap = <
415		MATRIX_KEY(0, 0, KEY_UP)
416		MATRIX_KEY(0, 1, KEY_DOWN)
417		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
418		MATRIX_KEY(0, 3, KEY_HOME)
419		MATRIX_KEY(1, 0, KEY_RIGHT)
420		MATRIX_KEY(1, 1, KEY_LEFT)
421		MATRIX_KEY(1, 2, KEY_ENTER)
422		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
423		MATRIX_KEY(2, 0, KEY_F6)
424		MATRIX_KEY(2, 1, KEY_F8)
425		MATRIX_KEY(2, 2, KEY_F9)
426		MATRIX_KEY(2, 3, KEY_F10)
427		MATRIX_KEY(3, 0, KEY_F1)
428		MATRIX_KEY(3, 1, KEY_F2)
429		MATRIX_KEY(3, 2, KEY_F3)
430		MATRIX_KEY(3, 3, KEY_POWER)
431	>;
432	status = "okay";
433};
434
435&pmu {
436	secure-reg-access;
437};
438
439&ssi2 {
440	status = "okay";
441};
442
443&uart1 {
444	pinctrl-names = "default";
445	pinctrl-0 = <&pinctrl_uart1>;
446	uart-has-rtscts;
447	status = "okay";
448};
449
450&uart2 {
451	pinctrl-names = "default";
452	pinctrl-0 = <&pinctrl_uart2>;
453	status = "okay";
454};
455
456&uart3 {
457	pinctrl-names = "default";
458	pinctrl-0 = <&pinctrl_uart3>;
459	uart-has-rtscts;
460	status = "okay";
461};
462
463&usbh1 {
464	pinctrl-names = "default";
465	pinctrl-0 = <&pinctrl_usbh1>;
466	vbus-supply = <&reg_hub_reset>;
467	fsl,usbphy = <&usbphy1>;
468	phy_type = "ulpi";
469	status = "okay";
470};
471
472&usbphy0 {
473	vcc-supply = <&vusb_reg>;
474};
475
476&usbotg {
477	dr_mode = "otg";
478	disable-over-current;
479	phy_type = "utmi_wide";
480	status = "okay";
481};
482
483&iomuxc {
484	imx51-babbage {
485		pinctrl_audmux: audmuxgrp {
486			fsl,pins = <
487				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
488				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
489				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
490				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
491			>;
492		};
493
494		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
495			fsl,pins = <
496				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
497			>;
498		};
499
500		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
501			fsl,pins = <
502				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
503			>;
504		};
505
506		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
507			fsl,pins = <
508				MX51_PAD_EIM_D17__GPIO2_1		0x85
509			>;
510		};
511
512		pinctrl_ecspi1: ecspi1grp {
513			fsl,pins = <
514				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
515				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
516				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
517				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
518				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
519			>;
520		};
521
522		pinctrl_esdhc1: esdhc1grp {
523			fsl,pins = <
524				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
525				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
526				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
527				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
528				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
529				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
530				MX51_PAD_GPIO1_0__GPIO1_0		0x100
531				MX51_PAD_GPIO1_1__GPIO1_1		0x100
532			>;
533		};
534
535		pinctrl_esdhc2: esdhc2grp {
536			fsl,pins = <
537				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
538				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
539				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
540				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
541				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
542				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
543				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
544				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
545			>;
546		};
547
548		pinctrl_fec: fecgrp {
549			fsl,pins = <
550				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
551				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
552				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
553				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
554				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
555				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
556				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
557				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
558				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
559				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
560				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
561				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
562				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
563				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
564				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
565				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
566				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
567				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
568				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
569			>;
570		};
571
572		pinctrl_gpio_keys: gpiokeysgrp {
573			fsl,pins = <
574				MX51_PAD_EIM_A27__GPIO2_21		0x5
575			>;
576		};
577
578		pinctrl_gpio_leds: gpioledsgrp {
579			fsl,pins = <
580				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
581			>;
582		};
583
584		pinctrl_i2c1: i2c1grp {
585			fsl,pins = <
586				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
587				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
588			>;
589		};
590
591		pinctrl_i2c2: i2c2grp {
592			fsl,pins = <
593				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
594				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
595			>;
596		};
597
598		pinctrl_ipu_disp1: ipudisp1grp {
599			fsl,pins = <
600				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
601				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
602				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
603				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
604				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
605				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
606				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
607				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
608				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
609				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
610				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
611				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
612				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
613				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
614				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
615				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
616				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
617				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
618				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
619				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
620				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
621				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
622				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
623				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
624				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
625				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
626			>;
627		};
628
629		pinctrl_ipu_disp2: ipudisp2grp {
630			fsl,pins = <
631				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
632				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
633				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
634				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
635				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
636				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
637				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
638				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
639				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
640				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
641				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
642				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
643				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
644				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
645				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
646				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
647				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
648				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
649				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
650				MX51_PAD_DI_GP4__DI2_PIN15		0x5
651			>;
652		};
653
654		pinctrl_kpp: kppgrp {
655			fsl,pins = <
656				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
657				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
658				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
659				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
660				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
661				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
662				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
663				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
664			>;
665		};
666
667		pinctrl_pmic: pmicgrp {
668			fsl,pins = <
669				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
670			>;
671		};
672
673		pinctrl_uart1: uart1grp {
674			fsl,pins = <
675				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
676				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
677				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
678				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
679			>;
680		};
681
682		pinctrl_uart2: uart2grp {
683			fsl,pins = <
684				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
685				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
686			>;
687		};
688
689		pinctrl_uart3: uart3grp {
690			fsl,pins = <
691				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
692				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
693				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
694				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
695			>;
696		};
697
698		pinctrl_usbh1: usbh1grp {
699			fsl,pins = <
700				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
701				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
702				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
703				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
704				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
705				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
706				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
707				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
708				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
709				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
710				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
711			>;
712		};
713
714		pinctrl_usbh1reg: usbh1reggrp {
715			fsl,pins = <
716				MX51_PAD_EIM_D21__GPIO2_5		0x85
717			>;
718		};
719
720		pinctrl_usbotgreg: usbotgreggrp {
721			fsl,pins = <
722				MX51_PAD_GPIO1_7__GPIO1_7		0x85
723			>;
724		};
725	};
726};
727