1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2/*
3 * Copyright 2014-2020 Toradex
4 * Copyright 2012 Freescale Semiconductor, Inc.
5 * Copyright 2011 Linaro Ltd.
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13#include "imx6q.dtsi"
14#include "imx6qdl-apalis.dtsi"
15
16/ {
17	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
18	compatible = "toradex,apalis_imx6q-ixora-v1.1",
19		     "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
20		     "fsl,imx6q";
21
22	aliases {
23		i2c0 = &i2c1;
24		i2c1 = &i2c3;
25		i2c2 = &i2c2;
26		rtc0 = &rtc_i2c;
27		rtc1 = &snvs_rtc;
28	};
29
30	chosen {
31		stdout-path = "serial0:115200n8";
32	};
33
34	gpio-keys {
35		compatible = "gpio-keys";
36		pinctrl-names = "default";
37		pinctrl-0 = <&pinctrl_gpio_keys>;
38
39		wakeup {
40			label = "Wake-Up";
41			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
42			linux,code = <KEY_WAKEUP>;
43			debounce-interval = <10>;
44			wakeup-source;
45		};
46	};
47
48	lcd_display: disp0 {
49		compatible = "fsl,imx-parallel-display";
50		#address-cells = <1>;
51		#size-cells = <0>;
52		interface-pix-fmt = "rgb24";
53		pinctrl-names = "default";
54		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
55		status = "okay";
56
57		port@0 {
58			reg = <0>;
59
60			lcd_display_in: endpoint {
61				remote-endpoint = <&ipu1_di1_disp1>;
62			};
63		};
64
65		port@1 {
66			reg = <1>;
67
68			lcd_display_out: endpoint {
69				remote-endpoint = <&lcd_panel_in>;
70			};
71		};
72	};
73
74	panel: panel {
75		/*
76		 * edt,et057090dhu: EDT 5.7" LCD TFT
77		 * edt,et070080dh6: EDT 7.0" LCD TFT
78		 */
79		compatible = "edt,et057090dhu";
80		backlight = <&backlight>;
81
82		port {
83			lcd_panel_in: endpoint {
84				remote-endpoint = <&lcd_display_out>;
85			};
86		};
87	};
88
89	leds {
90		compatible = "gpio-leds";
91
92		pinctrl-names = "default";
93		pinctrl-0 = <&pinctrl_leds_ixora>;
94
95		led4-green {
96			label = "LED_4_GREEN";
97			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
98		};
99
100		led4-red {
101			label = "LED_4_RED";
102			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
103		};
104
105		led5-green {
106			label = "LED_5_GREEN";
107			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
108		};
109
110		led5-red {
111			label = "LED_5_RED";
112			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
113		};
114	};
115};
116
117&backlight {
118	brightness-levels = <0 127 191 223 239 247 251 255>;
119	default-brightness-level = <1>;
120	status = "okay";
121};
122
123&can1 {
124	status = "okay";
125};
126
127&can2 {
128	status = "okay";
129};
130
131&hdmi {
132	status = "okay";
133};
134
135/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
136&i2c1 {
137	status = "okay";
138
139	/*
140	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
141	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
142	 */
143	touchscreen@4a {
144		compatible = "atmel,maxtouch";
145		reg = <0x4a>;
146		interrupt-parent = <&gpio6>;
147		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
148		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
149		status = "disabled";
150	};
151
152	/* M41T0M6 real time clock on carrier board */
153	rtc_i2c: rtc@68 {
154		compatible = "st,m41t0";
155		reg = <0x68>;
156	};
157};
158
159/*
160 * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
161 * board)
162 */
163&i2c3 {
164	status = "okay";
165};
166
167&ipu1_di1_disp1 {
168	remote-endpoint = <&lcd_display_in>;
169};
170
171&ldb {
172	status = "okay";
173};
174
175&pcie {
176	pinctrl-names = "default";
177	pinctrl-0 = <&pinctrl_reset_moci>;
178	/* active-high meaning opposite of regular PERST# active-low polarity */
179	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
180	reset-gpio-active-high;
181	status = "okay";
182};
183
184&pwm1 {
185	status = "okay";
186};
187
188&pwm2 {
189	status = "okay";
190};
191
192&pwm3 {
193	status = "okay";
194};
195
196&pwm4 {
197	status = "okay";
198};
199
200&reg_usb_otg_vbus {
201	status = "okay";
202};
203
204&reg_usb_host_vbus {
205	status = "okay";
206};
207
208&sata {
209	status = "okay";
210};
211
212&sound_spdif {
213	status = "okay";
214};
215
216&spdif {
217	status = "okay";
218};
219
220&uart1 {
221	status = "okay";
222};
223
224&uart2 {
225	status = "okay";
226};
227
228&uart4 {
229	status = "okay";
230};
231
232&uart5 {
233	status = "okay";
234};
235
236&usbh1 {
237	vbus-supply = <&reg_usb_host_vbus>;
238	status = "okay";
239};
240
241&usbotg {
242	vbus-supply = <&reg_usb_otg_vbus>;
243	status = "okay";
244};
245
246/* MMC1 */
247&usdhc1 {
248	pinctrl-names = "default";
249	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
250	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
251	bus-width = <4>;
252	status = "okay";
253};
254
255&iomuxc {
256	/*
257	 * Mux the Apalis GPIOs
258	 */
259	pinctrl-names = "default";
260	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
261		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
262		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
263		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
264		    >;
265
266	pinctrl_leds_ixora: ledsixoragrp {
267		fsl,pins = <
268			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
269			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
270			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
271			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
272		>;
273	};
274};
275