1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the armadillo 800 eva board
4 *
5 * Copyright (C) 2012 Renesas Solutions Corp.
6 */
7
8/dts-v1/;
9#include "r8a7740.dtsi"
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13#include <dt-bindings/pwm/pwm.h>
14
15/ {
16	model = "armadillo 800 eva";
17	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
18
19	aliases {
20		serial0 = &scifa1;
21	};
22
23	chosen {
24		bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=on rw";
25		stdout-path = "serial0:115200n8";
26	};
27
28	memory@40000000 {
29		device_type = "memory";
30		reg = <0x40000000 0x20000000>;
31	};
32
33	reg_3p3v: regulator-3p3v {
34		compatible = "regulator-fixed";
35		regulator-name = "fixed-3.3V";
36		regulator-min-microvolt = <3300000>;
37		regulator-max-microvolt = <3300000>;
38		regulator-always-on;
39		regulator-boot-on;
40	};
41
42	vcc_sdhi0: regulator-vcc-sdhi0 {
43		compatible = "regulator-fixed";
44
45		regulator-name = "SDHI0 Vcc";
46		regulator-min-microvolt = <3300000>;
47		regulator-max-microvolt = <3300000>;
48
49		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
50		enable-active-high;
51	};
52
53	vccq_sdhi0: regulator-vccq-sdhi0 {
54		compatible = "regulator-gpio";
55
56		regulator-name = "SDHI0 VccQ";
57		regulator-min-microvolt = <1800000>;
58		regulator-max-microvolt = <3300000>;
59		vin-supply = <&vcc_sdhi0>;
60
61		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
62		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
63		states = <3300000 0>, <1800000 1>;
64
65		enable-active-high;
66	};
67
68	reg_5p0v: regulator-5p0v {
69		compatible = "regulator-fixed";
70		regulator-name = "fixed-5.0V";
71		regulator-min-microvolt = <5000000>;
72		regulator-max-microvolt = <5000000>;
73		regulator-always-on;
74		regulator-boot-on;
75	};
76
77	keyboard {
78		compatible = "gpio-keys";
79
80		power-key {
81			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
82			linux,code = <KEY_POWER>;
83			label = "SW3";
84			wakeup-source;
85		};
86
87		back-key {
88			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
89			linux,code = <KEY_BACK>;
90			label = "SW4";
91		};
92
93		menu-key {
94			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
95			linux,code = <KEY_MENU>;
96			label = "SW5";
97		};
98
99		home-key {
100			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
101			linux,code = <KEY_HOME>;
102			label = "SW6";
103		};
104	};
105
106	leds {
107		compatible = "gpio-leds";
108		led3 {
109			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
110			label = "LED3";
111		};
112		led4 {
113			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
114			label = "LED4";
115		};
116		led5 {
117			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
118			label = "LED5";
119		};
120		led6 {
121			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
122			label = "LED6";
123		};
124	};
125
126	i2c2: i2c-2 {
127		#address-cells = <1>;
128		#size-cells = <0>;
129		compatible = "i2c-gpio";
130		sda-gpios = <&pfc 208 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
131		scl-gpios = <&pfc 91 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
132		i2c-gpio,delay-us = <5>;
133	};
134
135	backlight {
136		compatible = "pwm-backlight";
137		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
138		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
139		default-brightness-level = <9>;
140		pinctrl-0 = <&backlight_pins>;
141		pinctrl-names = "default";
142		power-supply = <&reg_5p0v>;
143		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
144	};
145
146	sound {
147		compatible = "simple-audio-card";
148
149		simple-audio-card,format = "i2s";
150
151		simple-audio-card,cpu {
152			sound-dai = <&sh_fsi2 0>;
153			bitclock-inversion;
154		};
155
156		simple-audio-card,codec {
157			sound-dai = <&wm8978>;
158			bitclock-master;
159			frame-master;
160			system-clock-frequency = <12288000>;
161		};
162	};
163};
164
165&ether {
166	pinctrl-0 = <&ether_pins>;
167	pinctrl-names = "default";
168
169	phy-handle = <&phy0>;
170	status = "okay";
171
172	phy0: ethernet-phy@0 {
173		reg = <0>;
174	};
175};
176
177&extal1_clk {
178	clock-frequency = <24000000>;
179};
180&extal2_clk {
181	clock-frequency = <48000000>;
182};
183&fsibck_clk {
184	clock-frequency = <12288000>;
185};
186&cpg_clocks {
187	renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
188};
189
190&cmt1 {
191	status = "okay";
192};
193
194&i2c0 {
195	status = "okay";
196	touchscreen@55 {
197		compatible = "sitronix,st1232";
198		reg = <0x55>;
199		interrupt-parent = <&irqpin1>;
200		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
201		pinctrl-0 = <&st1232_pins>;
202		pinctrl-names = "default";
203		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
204	};
205
206	wm8978: codec@1a {
207		#sound-dai-cells = <0>;
208		compatible = "wlf,wm8978";
209		reg = <0x1a>;
210	};
211};
212
213&i2c2 {
214	status = "okay";
215	rtc@30 {
216		compatible = "sii,s35390a";
217		reg = <0x30>;
218	};
219};
220
221&pfc {
222	pinctrl-0 = <&lcd0_pins>;
223	pinctrl-names = "default";
224
225	ether_pins: ether {
226		groups = "gether_mii", "gether_int";
227		function = "gether";
228	};
229
230	scifa1_pins: scifa1 {
231		groups = "scifa1_data";
232		function = "scifa1";
233	};
234
235	st1232_pins: touchscreen {
236		groups = "intc_irq10";
237		function = "intc";
238	};
239
240	backlight_pins: backlight {
241		groups = "tpu0_to2_1";
242		function = "tpu0";
243	};
244
245	mmc0_pins: mmc0 {
246		groups = "mmc0_data8_1", "mmc0_ctrl_1";
247		function = "mmc0";
248	};
249
250	sdhi0_pins: sd0 {
251		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
252		function = "sdhi0";
253	};
254
255	fsia_pins: sounda {
256		groups = "fsia_sclk_in", "fsia_mclk_out",
257			 "fsia_data_in_1", "fsia_data_out_0";
258		function = "fsia";
259	};
260
261	lcd0_pins: lcd0 {
262		groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
263		function = "lcd0";
264	};
265
266	lcd0_mux {
267		/* DBGMD/LCDC0/FSIA MUX */
268		gpio-hog;
269		gpios = <176 0>;
270		output-high;
271	};
272};
273
274&tpu {
275	status = "okay";
276};
277
278&mmcif0 {
279	pinctrl-0 = <&mmc0_pins>;
280	pinctrl-names = "default";
281
282	vmmc-supply = <&reg_3p3v>;
283	bus-width = <8>;
284	non-removable;
285	status = "okay";
286};
287
288&scifa1 {
289	pinctrl-0 = <&scifa1_pins>;
290	pinctrl-names = "default";
291
292	status = "okay";
293};
294
295&sdhi0 {
296	pinctrl-0 = <&sdhi0_pins>;
297	pinctrl-names = "default";
298
299	vmmc-supply = <&vcc_sdhi0>;
300	vqmmc-supply = <&vccq_sdhi0>;
301	bus-width = <4>;
302	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
303	status = "okay";
304};
305
306&sh_fsi2 {
307	pinctrl-0 = <&fsia_pins>;
308	pinctrl-names = "default";
309
310	status = "okay";
311};
312
313&tmu0 {
314	status = "okay";
315};
316