1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * linux/arch/arm/mach-pxa/palmtc.c
4  *
5  * Support for the Palm Tungsten|C
6  *
7  * Author:	Marek Vasut <marek.vasut@gmail.com>
8  *
9  * Based on work of:
10  *		Petr Blaha <p3t3@centrum.cz>
11  *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
12  */
13 
14 #include <linux/platform_device.h>
15 #include <linux/delay.h>
16 #include <linux/irq.h>
17 #include <linux/input.h>
18 #include <linux/pwm.h>
19 #include <linux/pwm_backlight.h>
20 #include <linux/gpio/machine.h>
21 #include <linux/input/matrix_keypad.h>
22 #include <linux/ucb1400.h>
23 #include <linux/power_supply.h>
24 #include <linux/gpio_keys.h>
25 #include <linux/mtd/physmap.h>
26 
27 #include <asm/mach-types.h>
28 #include <asm/mach/arch.h>
29 #include <asm/mach/map.h>
30 
31 #include "pxa25x.h"
32 #include <mach/audio.h>
33 #include <mach/palmtc.h>
34 #include <linux/platform_data/mmc-pxamci.h>
35 #include <linux/platform_data/video-pxafb.h>
36 #include <linux/platform_data/irda-pxaficp.h>
37 #include "udc.h"
38 
39 #include "generic.h"
40 #include "devices.h"
41 
42 /******************************************************************************
43  * Pin configuration
44  ******************************************************************************/
45 static unsigned long palmtc_pin_config[] __initdata = {
46 	/* MMC */
47 	GPIO6_MMC_CLK,
48 	GPIO8_MMC_CS0,
49 	GPIO12_GPIO,	/* detect */
50 	GPIO32_GPIO,	/* power */
51 	GPIO54_GPIO,	/* r/o switch */
52 
53 	/* PCMCIA */
54 	GPIO52_nPCE_1,
55 	GPIO53_nPCE_2,
56 	GPIO50_nPIOR,
57 	GPIO51_nPIOW,
58 	GPIO49_nPWE,
59 	GPIO48_nPOE,
60 	GPIO52_nPCE_1,
61 	GPIO53_nPCE_2,
62 	GPIO57_nIOIS16,
63 	GPIO56_nPWAIT,
64 
65 	/* AC97 */
66 	GPIO28_AC97_BITCLK,
67 	GPIO29_AC97_SDATA_IN_0,
68 	GPIO30_AC97_SDATA_OUT,
69 	GPIO31_AC97_SYNC,
70 
71 	/* IrDA */
72 	GPIO45_GPIO,	/* ir disable */
73 	GPIO46_FICP_RXD,
74 	GPIO47_FICP_TXD,
75 
76 	/* PWM */
77 	GPIO17_PWM1_OUT,
78 
79 	/* USB */
80 	GPIO4_GPIO,	/* detect */
81 	GPIO36_GPIO,	/* pullup */
82 
83 	/* LCD */
84 	GPIOxx_LCD_TFT_16BPP,
85 
86 	/* MATRIX KEYPAD */
87 	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
88 	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
89 	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
90 	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
91 	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
92 	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
93 	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
94 	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
95 	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
96 	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
97 	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
98 	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
99 	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
100 	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
101 	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
102 	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
103 
104 	/* PXA GPIO KEYS */
105 	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
106 
107 	/* MISC */
108 	GPIO1_RST,	/* reset */
109 	GPIO2_GPIO,	/* earphone detect */
110 	GPIO16_GPIO,	/* backlight switch */
111 };
112 
113 /******************************************************************************
114  * SD/MMC card controller
115  ******************************************************************************/
116 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
117 static struct pxamci_platform_data palmtc_mci_platform_data = {
118 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
119 	.detect_delay_ms	= 200,
120 };
121 
122 static struct gpiod_lookup_table palmtc_mci_gpio_table = {
123 	.dev_id = "pxa2xx-mci.0",
124 	.table = {
125 		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_DETECT_N,
126 			    "cd", GPIO_ACTIVE_LOW),
127 		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY,
128 			    "wp", GPIO_ACTIVE_LOW),
129 		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_POWER,
130 			    "power", GPIO_ACTIVE_HIGH),
131 		{ },
132 	},
133 };
134 
palmtc_mmc_init(void)135 static void __init palmtc_mmc_init(void)
136 {
137 	gpiod_add_lookup_table(&palmtc_mci_gpio_table);
138 	pxa_set_mci_info(&palmtc_mci_platform_data);
139 }
140 #else
palmtc_mmc_init(void)141 static inline void palmtc_mmc_init(void) {}
142 #endif
143 
144 /******************************************************************************
145  * GPIO keys
146  ******************************************************************************/
147 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
148 static struct gpio_keys_button palmtc_pxa_buttons[] = {
149 	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
150 };
151 
152 static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
153 	.buttons	= palmtc_pxa_buttons,
154 	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
155 };
156 
157 static struct platform_device palmtc_pxa_keys = {
158 	.name	= "gpio-keys",
159 	.id	= -1,
160 	.dev	= {
161 		.platform_data = &palmtc_pxa_keys_data,
162 	},
163 };
164 
palmtc_keys_init(void)165 static void __init palmtc_keys_init(void)
166 {
167 	platform_device_register(&palmtc_pxa_keys);
168 }
169 #else
palmtc_keys_init(void)170 static inline void palmtc_keys_init(void) {}
171 #endif
172 
173 /******************************************************************************
174  * Backlight
175  ******************************************************************************/
176 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
177 
178 static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = {
179 	.dev_id = "pwm-backlight.0",
180 	.table = {
181 		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER,
182 			    "enable", GPIO_ACTIVE_HIGH),
183 	},
184 };
185 
186 static struct pwm_lookup palmtc_pwm_lookup[] = {
187 	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
188 		   PWM_POLARITY_NORMAL),
189 };
190 
191 static struct platform_pwm_backlight_data palmtc_backlight_data = {
192 	.max_brightness	= PALMTC_MAX_INTENSITY,
193 	.dft_brightness	= PALMTC_MAX_INTENSITY,
194 };
195 
196 static struct platform_device palmtc_backlight = {
197 	.name	= "pwm-backlight",
198 	.dev	= {
199 		.parent		= &pxa25x_device_pwm1.dev,
200 		.platform_data	= &palmtc_backlight_data,
201 	},
202 };
203 
palmtc_pwm_init(void)204 static void __init palmtc_pwm_init(void)
205 {
206 	gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table);
207 	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
208 	platform_device_register(&palmtc_backlight);
209 }
210 #else
palmtc_pwm_init(void)211 static inline void palmtc_pwm_init(void) {}
212 #endif
213 
214 /******************************************************************************
215  * IrDA
216  ******************************************************************************/
217 #if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
218 static struct pxaficp_platform_data palmtc_ficp_platform_data = {
219 	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
220 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
221 };
222 
palmtc_irda_init(void)223 static void __init palmtc_irda_init(void)
224 {
225 	pxa_set_ficp_info(&palmtc_ficp_platform_data);
226 }
227 #else
palmtc_irda_init(void)228 static inline void palmtc_irda_init(void) {}
229 #endif
230 
231 /******************************************************************************
232  * Keyboard
233  ******************************************************************************/
234 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
235 static const uint32_t palmtc_matrix_keys[] = {
236 	KEY(0, 0, KEY_F1),
237 	KEY(0, 1, KEY_X),
238 	KEY(0, 2, KEY_POWER),
239 	KEY(0, 3, KEY_TAB),
240 	KEY(0, 4, KEY_A),
241 	KEY(0, 5, KEY_Q),
242 	KEY(0, 6, KEY_LEFTSHIFT),
243 	KEY(0, 7, KEY_Z),
244 	KEY(0, 8, KEY_S),
245 	KEY(0, 9, KEY_W),
246 	KEY(0, 10, KEY_E),
247 	KEY(0, 11, KEY_UP),
248 
249 	KEY(1, 0, KEY_F2),
250 	KEY(1, 1, KEY_DOWN),
251 	KEY(1, 3, KEY_D),
252 	KEY(1, 4, KEY_C),
253 	KEY(1, 5, KEY_F),
254 	KEY(1, 6, KEY_R),
255 	KEY(1, 7, KEY_SPACE),
256 	KEY(1, 8, KEY_V),
257 	KEY(1, 9, KEY_G),
258 	KEY(1, 10, KEY_T),
259 	KEY(1, 11, KEY_LEFT),
260 
261 	KEY(2, 0, KEY_F3),
262 	KEY(2, 1, KEY_LEFTCTRL),
263 	KEY(2, 3, KEY_H),
264 	KEY(2, 4, KEY_Y),
265 	KEY(2, 5, KEY_N),
266 	KEY(2, 6, KEY_J),
267 	KEY(2, 7, KEY_U),
268 	KEY(2, 8, KEY_M),
269 	KEY(2, 9, KEY_K),
270 	KEY(2, 10, KEY_I),
271 	KEY(2, 11, KEY_RIGHT),
272 
273 	KEY(3, 0, KEY_F4),
274 	KEY(3, 1, KEY_ENTER),
275 	KEY(3, 3, KEY_DOT),
276 	KEY(3, 4, KEY_L),
277 	KEY(3, 5, KEY_O),
278 	KEY(3, 6, KEY_LEFTALT),
279 	KEY(3, 7, KEY_ENTER),
280 	KEY(3, 8, KEY_BACKSPACE),
281 	KEY(3, 9, KEY_P),
282 	KEY(3, 10, KEY_B),
283 	KEY(3, 11, KEY_FN),
284 };
285 
286 const struct matrix_keymap_data palmtc_keymap_data = {
287 	.keymap			= palmtc_matrix_keys,
288 	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
289 };
290 
291 static const unsigned int palmtc_keypad_row_gpios[] = {
292 	0, 9, 10, 11
293 };
294 
295 static const unsigned int palmtc_keypad_col_gpios[] = {
296 	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
297 };
298 
299 static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
300 	.keymap_data	= &palmtc_keymap_data,
301 	.row_gpios	= palmtc_keypad_row_gpios,
302 	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
303 	.col_gpios	= palmtc_keypad_col_gpios,
304 	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
305 	.active_low	= 1,
306 
307 	.debounce_ms		= 20,
308 	.col_scan_delay_us	= 5,
309 };
310 
311 static struct platform_device palmtc_keyboard = {
312 	.name	= "matrix-keypad",
313 	.id	= -1,
314 	.dev	= {
315 		.platform_data = &palmtc_keypad_platform_data,
316 	},
317 };
palmtc_mkp_init(void)318 static void __init palmtc_mkp_init(void)
319 {
320 	platform_device_register(&palmtc_keyboard);
321 }
322 #else
palmtc_mkp_init(void)323 static inline void palmtc_mkp_init(void) {}
324 #endif
325 
326 /******************************************************************************
327  * UDC
328  ******************************************************************************/
329 #if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
330 static struct gpiod_lookup_table palmtc_udc_gpiod_table = {
331 	.dev_id = "gpio-vbus",
332 	.table = {
333 		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N,
334 			    "vbus", GPIO_ACTIVE_LOW),
335 		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER,
336 			    "pullup", GPIO_ACTIVE_HIGH),
337 		{ },
338 	},
339 };
340 
341 static struct platform_device palmtc_gpio_vbus = {
342 	.name	= "gpio-vbus",
343 	.id	= -1,
344 };
345 
palmtc_udc_init(void)346 static void __init palmtc_udc_init(void)
347 {
348 	gpiod_add_lookup_table(&palmtc_udc_gpiod_table);
349 	platform_device_register(&palmtc_gpio_vbus);
350 };
351 #else
palmtc_udc_init(void)352 static inline void palmtc_udc_init(void) {}
353 #endif
354 
355 /******************************************************************************
356  * Touchscreen / Battery / GPIO-extender
357  ******************************************************************************/
358 #if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
359 	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
360 static struct platform_device palmtc_ucb1400_device = {
361 	.name	= "ucb1400_core",
362 	.id	= -1,
363 };
364 
palmtc_ts_init(void)365 static void __init palmtc_ts_init(void)
366 {
367 	pxa_set_ac97_info(NULL);
368 	platform_device_register(&palmtc_ucb1400_device);
369 }
370 #else
palmtc_ts_init(void)371 static inline void palmtc_ts_init(void) {}
372 #endif
373 
374 /******************************************************************************
375  * LEDs
376  ******************************************************************************/
377 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
378 struct gpio_led palmtc_gpio_leds[] = {
379 {
380 	.name			= "palmtc:green:user",
381 	.default_trigger	= "none",
382 	.gpio			= GPIO_NR_PALMTC_LED_POWER,
383 	.active_low		= 1,
384 }, {
385 	.name			= "palmtc:vibra:vibra",
386 	.default_trigger	= "none",
387 	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
388 	.active_low		= 1,
389 }
390 
391 };
392 
393 static struct gpio_led_platform_data palmtc_gpio_led_info = {
394 	.leds		= palmtc_gpio_leds,
395 	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
396 };
397 
398 static struct platform_device palmtc_leds = {
399 	.name	= "leds-gpio",
400 	.id	= -1,
401 	.dev	= {
402 		.platform_data	= &palmtc_gpio_led_info,
403 	}
404 };
405 
palmtc_leds_init(void)406 static void __init palmtc_leds_init(void)
407 {
408 	platform_device_register(&palmtc_leds);
409 }
410 #else
palmtc_leds_init(void)411 static inline void palmtc_leds_init(void) {}
412 #endif
413 
414 /******************************************************************************
415  * NOR Flash
416  ******************************************************************************/
417 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
418 static struct resource palmtc_flash_resource = {
419 	.start	= PXA_CS0_PHYS,
420 	.end	= PXA_CS0_PHYS + SZ_16M - 1,
421 	.flags	= IORESOURCE_MEM,
422 };
423 
424 static struct mtd_partition palmtc_flash_parts[] = {
425 	{
426 		.name	= "U-Boot Bootloader",
427 		.offset	= 0x0,
428 		.size	= 0x40000,
429 	},
430 	{
431 		.name	= "Linux Kernel",
432 		.offset	= 0x40000,
433 		.size	= 0x2c0000,
434 	},
435 	{
436 		.name	= "Filesystem",
437 		.offset	= 0x300000,
438 		.size	= 0xcc0000,
439 	},
440 	{
441 		.name	= "U-Boot Environment",
442 		.offset	= 0xfc0000,
443 		.size	= MTDPART_SIZ_FULL,
444 	},
445 };
446 
447 static struct physmap_flash_data palmtc_flash_data = {
448 	.width		= 4,
449 	.parts		= palmtc_flash_parts,
450 	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
451 };
452 
453 static struct platform_device palmtc_flash = {
454 	.name		= "physmap-flash",
455 	.id		= -1,
456 	.resource	= &palmtc_flash_resource,
457 	.num_resources	= 1,
458 	.dev = {
459 		.platform_data	= &palmtc_flash_data,
460 	},
461 };
462 
palmtc_nor_init(void)463 static void __init palmtc_nor_init(void)
464 {
465 	platform_device_register(&palmtc_flash);
466 }
467 #else
palmtc_nor_init(void)468 static inline void palmtc_nor_init(void) {}
469 #endif
470 
471 /******************************************************************************
472  * Framebuffer
473  ******************************************************************************/
474 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
475 static struct pxafb_mode_info palmtc_lcd_modes[] = {
476 	{
477 		.pixclock	= 115384,
478 		.xres		= 320,
479 		.yres		= 320,
480 		.bpp		= 16,
481 
482 		.left_margin	= 27,
483 		.right_margin	= 7,
484 		.upper_margin	= 7,
485 		.lower_margin	= 8,
486 
487 		.hsync_len	= 6,
488 		.vsync_len	= 1,
489 	},
490 };
491 
492 static struct pxafb_mach_info palmtc_lcd_screen = {
493 	.modes			= palmtc_lcd_modes,
494 	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
495 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
496 };
497 
palmtc_lcd_init(void)498 static void __init palmtc_lcd_init(void)
499 {
500 	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
501 }
502 #else
palmtc_lcd_init(void)503 static inline void palmtc_lcd_init(void) {}
504 #endif
505 
506 /******************************************************************************
507  * Machine init
508  ******************************************************************************/
palmtc_init(void)509 static void __init palmtc_init(void)
510 {
511 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
512 
513 	pxa_set_ffuart_info(NULL);
514 	pxa_set_btuart_info(NULL);
515 	pxa_set_stuart_info(NULL);
516 	pxa_set_hwuart_info(NULL);
517 
518 	palmtc_mmc_init();
519 	palmtc_keys_init();
520 	palmtc_pwm_init();
521 	palmtc_irda_init();
522 	palmtc_mkp_init();
523 	palmtc_udc_init();
524 	palmtc_ts_init();
525 	palmtc_nor_init();
526 	palmtc_lcd_init();
527 	palmtc_leds_init();
528 };
529 
530 MACHINE_START(PALMTC, "Palm Tungsten|C")
531 	.atag_offset 	= 0x100,
532 	.map_io		= pxa25x_map_io,
533 	.nr_irqs	= PXA_NR_IRQS,
534 	.init_irq	= pxa25x_init_irq,
535 	.handle_irq	= pxa25x_handle_irq,
536 	.init_time	= pxa_timer_init,
537 	.init_machine	= palmtc_init,
538 	.restart	= pxa_restart,
539 MACHINE_END
540