1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/kernel.h>
3 #include <linux/gfp.h>
4 #include <linux/ide.h>
5 
generic_ide_suspend(struct device * dev,pm_message_t mesg)6 int generic_ide_suspend(struct device *dev, pm_message_t mesg)
7 {
8 	ide_drive_t *drive = to_ide_device(dev);
9 	ide_drive_t *pair = ide_get_pair_dev(drive);
10 	ide_hwif_t *hwif = drive->hwif;
11 	struct request *rq;
12 	struct ide_pm_state rqpm;
13 	int ret;
14 
15 	if (ide_port_acpi(hwif)) {
16 		/* call ACPI _GTM only once */
17 		if ((drive->dn & 1) == 0 || pair == NULL)
18 			ide_acpi_get_timing(hwif);
19 	}
20 
21 	memset(&rqpm, 0, sizeof(rqpm));
22 	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
23 	ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
24 	ide_req(rq)->special = &rqpm;
25 	rqpm.pm_step = IDE_PM_START_SUSPEND;
26 	if (mesg.event == PM_EVENT_PRETHAW)
27 		mesg.event = PM_EVENT_FREEZE;
28 	rqpm.pm_state = mesg.event;
29 
30 	blk_execute_rq(NULL, rq, 0);
31 	ret = scsi_req(rq)->result ? -EIO : 0;
32 	blk_put_request(rq);
33 
34 	if (ret == 0 && ide_port_acpi(hwif)) {
35 		/* call ACPI _PS3 only after both devices are suspended */
36 		if ((drive->dn & 1) || pair == NULL)
37 			ide_acpi_set_state(hwif, 0);
38 	}
39 
40 	return ret;
41 }
42 
ide_pm_execute_rq(struct request * rq)43 static int ide_pm_execute_rq(struct request *rq)
44 {
45 	struct request_queue *q = rq->q;
46 
47 	if (unlikely(blk_queue_dying(q))) {
48 		rq->rq_flags |= RQF_QUIET;
49 		scsi_req(rq)->result = -ENXIO;
50 		blk_mq_end_request(rq, BLK_STS_OK);
51 		return -ENXIO;
52 	}
53 	blk_execute_rq(NULL, rq, true);
54 
55 	return scsi_req(rq)->result ? -EIO : 0;
56 }
57 
generic_ide_resume(struct device * dev)58 int generic_ide_resume(struct device *dev)
59 {
60 	ide_drive_t *drive = to_ide_device(dev);
61 	ide_drive_t *pair = ide_get_pair_dev(drive);
62 	ide_hwif_t *hwif = drive->hwif;
63 	struct request *rq;
64 	struct ide_pm_state rqpm;
65 	int err;
66 
67 	blk_mq_start_stopped_hw_queues(drive->queue, true);
68 
69 	if (ide_port_acpi(hwif)) {
70 		/* call ACPI _PS0 / _STM only once */
71 		if ((drive->dn & 1) == 0 || pair == NULL) {
72 			ide_acpi_set_state(hwif, 1);
73 			ide_acpi_push_timing(hwif);
74 		}
75 
76 		ide_acpi_exec_tfs(drive);
77 	}
78 
79 	memset(&rqpm, 0, sizeof(rqpm));
80 	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PM);
81 	ide_req(rq)->type = ATA_PRIV_PM_RESUME;
82 	ide_req(rq)->special = &rqpm;
83 	rqpm.pm_step = IDE_PM_START_RESUME;
84 	rqpm.pm_state = PM_EVENT_ON;
85 
86 	err = ide_pm_execute_rq(rq);
87 	blk_put_request(rq);
88 
89 	if (err == 0 && dev->driver) {
90 		struct ide_driver *drv = to_ide_driver(dev->driver);
91 
92 		if (drv->resume)
93 			drv->resume(drive);
94 	}
95 
96 	return err;
97 }
98 
ide_complete_power_step(ide_drive_t * drive,struct request * rq)99 void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
100 {
101 	struct ide_pm_state *pm = ide_req(rq)->special;
102 
103 #ifdef DEBUG_PM
104 	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
105 		drive->name, pm->pm_step);
106 #endif
107 	if (drive->media != ide_disk)
108 		return;
109 
110 	switch (pm->pm_step) {
111 	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
112 		if (pm->pm_state == PM_EVENT_FREEZE)
113 			pm->pm_step = IDE_PM_COMPLETED;
114 		else
115 			pm->pm_step = IDE_PM_STANDBY;
116 		break;
117 	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
118 		pm->pm_step = IDE_PM_COMPLETED;
119 		break;
120 	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
121 		pm->pm_step = IDE_PM_IDLE;
122 		break;
123 	case IDE_PM_IDLE:		/* Resume step 2 (idle)*/
124 		pm->pm_step = IDE_PM_RESTORE_DMA;
125 		break;
126 	}
127 }
128 
ide_start_power_step(ide_drive_t * drive,struct request * rq)129 ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
130 {
131 	struct ide_pm_state *pm = ide_req(rq)->special;
132 	struct ide_cmd cmd = { };
133 
134 	switch (pm->pm_step) {
135 	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
136 		if (drive->media != ide_disk)
137 			break;
138 		/* Not supported? Switch to next step now. */
139 		if (ata_id_flush_enabled(drive->id) == 0 ||
140 		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
141 			ide_complete_power_step(drive, rq);
142 			return ide_stopped;
143 		}
144 		if (ata_id_flush_ext_enabled(drive->id))
145 			cmd.tf.command = ATA_CMD_FLUSH_EXT;
146 		else
147 			cmd.tf.command = ATA_CMD_FLUSH;
148 		goto out_do_tf;
149 	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
150 		cmd.tf.command = ATA_CMD_STANDBYNOW1;
151 		goto out_do_tf;
152 	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
153 		ide_set_max_pio(drive);
154 		/*
155 		 * skip IDE_PM_IDLE for ATAPI devices
156 		 */
157 		if (drive->media != ide_disk)
158 			pm->pm_step = IDE_PM_RESTORE_DMA;
159 		else
160 			ide_complete_power_step(drive, rq);
161 		return ide_stopped;
162 	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
163 		cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
164 		goto out_do_tf;
165 	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
166 		/*
167 		 * Right now, all we do is call ide_set_dma(drive),
168 		 * we could be smarter and check for current xfer_speed
169 		 * in struct drive etc...
170 		 */
171 		if (drive->hwif->dma_ops == NULL)
172 			break;
173 		/*
174 		 * TODO: respect IDE_DFLAG_USING_DMA
175 		 */
176 		ide_set_dma(drive);
177 		break;
178 	}
179 
180 	pm->pm_step = IDE_PM_COMPLETED;
181 
182 	return ide_stopped;
183 
184 out_do_tf:
185 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
186 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
187 	cmd.protocol = ATA_PROT_NODATA;
188 
189 	return do_rw_taskfile(drive, &cmd);
190 }
191 
192 /**
193  *	ide_complete_pm_rq - end the current Power Management request
194  *	@drive: target drive
195  *	@rq: request
196  *
197  *	This function cleans up the current PM request and stops the queue
198  *	if necessary.
199  */
ide_complete_pm_rq(ide_drive_t * drive,struct request * rq)200 void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
201 {
202 	struct request_queue *q = drive->queue;
203 	struct ide_pm_state *pm = ide_req(rq)->special;
204 
205 	ide_complete_power_step(drive, rq);
206 	if (pm->pm_step != IDE_PM_COMPLETED)
207 		return;
208 
209 #ifdef DEBUG_PM
210 	printk("%s: completing PM request, %s\n", drive->name,
211 	       (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
212 #endif
213 	if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
214 		blk_mq_stop_hw_queues(q);
215 	else
216 		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
217 
218 	drive->hwif->rq = NULL;
219 
220 	blk_mq_end_request(rq, BLK_STS_OK);
221 }
222 
ide_check_pm_state(ide_drive_t * drive,struct request * rq)223 void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
224 {
225 	struct ide_pm_state *pm = ide_req(rq)->special;
226 
227 	if (blk_rq_is_private(rq) &&
228 	    ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
229 	    pm->pm_step == IDE_PM_START_SUSPEND)
230 		/* Mark drive blocked when starting the suspend sequence. */
231 		drive->dev_flags |= IDE_DFLAG_BLOCKED;
232 	else if (blk_rq_is_private(rq) &&
233 	         ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
234 		 pm->pm_step == IDE_PM_START_RESUME) {
235 		/*
236 		 * The first thing we do on wakeup is to wait for BSY bit to
237 		 * go away (with a looong timeout) as a drive on this hwif may
238 		 * just be POSTing itself.
239 		 * We do that before even selecting as the "other" device on
240 		 * the bus may be broken enough to walk on our toes at this
241 		 * point.
242 		 */
243 		ide_hwif_t *hwif = drive->hwif;
244 		const struct ide_tp_ops *tp_ops = hwif->tp_ops;
245 		struct request_queue *q = drive->queue;
246 		int rc;
247 #ifdef DEBUG_PM
248 		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
249 #endif
250 		rc = ide_wait_not_busy(hwif, 35000);
251 		if (rc)
252 			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
253 		tp_ops->dev_select(drive);
254 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
255 		rc = ide_wait_not_busy(hwif, 100000);
256 		if (rc)
257 			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
258 
259 		blk_mq_start_hw_queues(q);
260 	}
261 }
262