1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 *
4 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
5 *
6 * Extended 3 / 2005 by Hartmut Hackmann to support various
7 * cards with the tda10046 DVB-T channel decoder
8 */
9
10 #include "saa7134.h"
11 #include "saa7134-reg.h"
12
13 #include <linux/init.h>
14 #include <linux/list.h>
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/delay.h>
18 #include <linux/kthread.h>
19 #include <linux/suspend.h>
20
21 #include <media/v4l2-common.h>
22 #include "dvb-pll.h"
23 #include <media/dvb_frontend.h>
24
25 #include "mt352.h"
26 #include "mt352_priv.h" /* FIXME */
27 #include "tda1004x.h"
28 #include "nxt200x.h"
29 #include "tuner-xc2028.h"
30 #include "xc5000.h"
31
32 #include "tda10086.h"
33 #include "tda826x.h"
34 #include "tda827x.h"
35 #include "isl6421.h"
36 #include "isl6405.h"
37 #include "lnbp21.h"
38 #include "tuner-simple.h"
39 #include "tda10048.h"
40 #include "tda18271.h"
41 #include "lgdt3305.h"
42 #include "tda8290.h"
43 #include "mb86a20s.h"
44 #include "lgs8gxx.h"
45
46 #include "zl10353.h"
47 #include "qt1010.h"
48
49 #include "zl10036.h"
50 #include "zl10039.h"
51 #include "mt312.h"
52 #include "s5h1411.h"
53
54 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
55 MODULE_LICENSE("GPL");
56
57 static unsigned int antenna_pwr;
58
59 module_param(antenna_pwr, int, 0444);
60 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
61
62 static int use_frontend;
63 module_param(use_frontend, int, 0644);
64 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
65
66 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
67
68 /* ------------------------------------------------------------------
69 * mt352 based DVB-T cards
70 */
71
pinnacle_antenna_pwr(struct saa7134_dev * dev,int on)72 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
73 {
74 u32 ok;
75
76 if (!on) {
77 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
78 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
79 return 0;
80 }
81
82 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
83 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
84 udelay(10);
85
86 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
87 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
88 udelay(10);
89 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
90 udelay(10);
91 ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
92 pr_debug("%s %s\n", __func__, ok ? "on" : "off");
93
94 if (!ok)
95 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
96 return ok;
97 }
98
mt352_pinnacle_init(struct dvb_frontend * fe)99 static int mt352_pinnacle_init(struct dvb_frontend* fe)
100 {
101 static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
102 static u8 reset [] = { RESET, 0x80 };
103 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
104 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
105 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
106 static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
107 static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
108 static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
109 static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
110
111 pr_debug("%s called\n", __func__);
112
113 mt352_write(fe, clock_config, sizeof(clock_config));
114 udelay(200);
115 mt352_write(fe, reset, sizeof(reset));
116 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
117 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
118 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
119 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
120
121 mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
122 mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
123 mt352_write(fe, irq_cfg, sizeof(irq_cfg));
124
125 return 0;
126 }
127
mt352_aver777_init(struct dvb_frontend * fe)128 static int mt352_aver777_init(struct dvb_frontend* fe)
129 {
130 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
131 static u8 reset [] = { RESET, 0x80 };
132 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
133 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
134 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
135
136 mt352_write(fe, clock_config, sizeof(clock_config));
137 udelay(200);
138 mt352_write(fe, reset, sizeof(reset));
139 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
140 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
141 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
142
143 return 0;
144 }
145
mt352_avermedia_xc3028_init(struct dvb_frontend * fe)146 static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
147 {
148 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
149 static u8 reset [] = { RESET, 0x80 };
150 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
151 static u8 agc_cfg [] = { AGC_TARGET, 0xe };
152 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
153
154 mt352_write(fe, clock_config, sizeof(clock_config));
155 udelay(200);
156 mt352_write(fe, reset, sizeof(reset));
157 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
158 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
159 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
160 return 0;
161 }
162
mt352_pinnacle_tuner_set_params(struct dvb_frontend * fe)163 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe)
164 {
165 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
166 u8 off[] = { 0x00, 0xf1};
167 u8 on[] = { 0x00, 0x71};
168 struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
169
170 struct saa7134_dev *dev = fe->dvb->priv;
171 struct v4l2_frequency f;
172
173 /* set frequency (mt2050) */
174 f.tuner = 0;
175 f.type = V4L2_TUNER_DIGITAL_TV;
176 f.frequency = c->frequency / 1000 * 16 / 1000;
177 if (fe->ops.i2c_gate_ctrl)
178 fe->ops.i2c_gate_ctrl(fe, 1);
179 i2c_transfer(&dev->i2c_adap, &msg, 1);
180 saa_call_all(dev, tuner, s_frequency, &f);
181 msg.buf = on;
182 if (fe->ops.i2c_gate_ctrl)
183 fe->ops.i2c_gate_ctrl(fe, 1);
184 i2c_transfer(&dev->i2c_adap, &msg, 1);
185
186 pinnacle_antenna_pwr(dev, antenna_pwr);
187
188 /* mt352 setup */
189 return mt352_pinnacle_init(fe);
190 }
191
192 static struct mt352_config pinnacle_300i = {
193 .demod_address = 0x3c >> 1,
194 .adc_clock = 20333,
195 .if2 = 36150,
196 .no_tuner = 1,
197 .demod_init = mt352_pinnacle_init,
198 };
199
200 static struct mt352_config avermedia_777 = {
201 .demod_address = 0xf,
202 .demod_init = mt352_aver777_init,
203 };
204
205 static struct mt352_config avermedia_xc3028_mt352_dev = {
206 .demod_address = (0x1e >> 1),
207 .no_tuner = 1,
208 .demod_init = mt352_avermedia_xc3028_init,
209 };
210
211 static struct tda18271_std_map mb86a20s_tda18271_std_map = {
212 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
213 .if_lvl = 7, .rfagc_top = 0x37, },
214 };
215
216 static struct tda18271_config kworld_tda18271_config = {
217 .std_map = &mb86a20s_tda18271_std_map,
218 .gate = TDA18271_GATE_DIGITAL,
219 .config = 3, /* Use tuner callback for AGC */
220
221 };
222
223 static const struct mb86a20s_config kworld_mb86a20s_config = {
224 .demod_address = 0x10,
225 };
226
kworld_sbtvd_gate_ctrl(struct dvb_frontend * fe,int enable)227 static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable)
228 {
229 struct saa7134_dev *dev = fe->dvb->priv;
230
231 unsigned char initmsg[] = {0x45, 0x97};
232 unsigned char msg_enable[] = {0x45, 0xc1};
233 unsigned char msg_disable[] = {0x45, 0x81};
234 struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2};
235
236 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
237 pr_warn("could not access the I2C gate\n");
238 return -EIO;
239 }
240 if (enable)
241 msg.buf = msg_enable;
242 else
243 msg.buf = msg_disable;
244 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
245 pr_warn("could not access the I2C gate\n");
246 return -EIO;
247 }
248 msleep(20);
249 return 0;
250 }
251
252 /* ==================================================================
253 * tda1004x based DVB-T cards, helper functions
254 */
255
philips_tda1004x_request_firmware(struct dvb_frontend * fe,const struct firmware ** fw,char * name)256 static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
257 const struct firmware **fw, char *name)
258 {
259 struct saa7134_dev *dev = fe->dvb->priv;
260 return request_firmware(fw, name, &dev->pci->dev);
261 }
262
263 /* ------------------------------------------------------------------
264 * these tuners are tu1216, td1316(a)
265 */
266
philips_tda6651_pll_set(struct dvb_frontend * fe)267 static int philips_tda6651_pll_set(struct dvb_frontend *fe)
268 {
269 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
270 struct saa7134_dev *dev = fe->dvb->priv;
271 struct tda1004x_state *state = fe->demodulator_priv;
272 u8 addr = state->config->tuner_address;
273 u8 tuner_buf[4];
274 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
275 sizeof(tuner_buf) };
276 int tuner_frequency = 0;
277 u8 band, cp, filter;
278
279 /* determine charge pump */
280 tuner_frequency = c->frequency + 36166000;
281 if (tuner_frequency < 87000000)
282 return -EINVAL;
283 else if (tuner_frequency < 130000000)
284 cp = 3;
285 else if (tuner_frequency < 160000000)
286 cp = 5;
287 else if (tuner_frequency < 200000000)
288 cp = 6;
289 else if (tuner_frequency < 290000000)
290 cp = 3;
291 else if (tuner_frequency < 420000000)
292 cp = 5;
293 else if (tuner_frequency < 480000000)
294 cp = 6;
295 else if (tuner_frequency < 620000000)
296 cp = 3;
297 else if (tuner_frequency < 830000000)
298 cp = 5;
299 else if (tuner_frequency < 895000000)
300 cp = 7;
301 else
302 return -EINVAL;
303
304 /* determine band */
305 if (c->frequency < 49000000)
306 return -EINVAL;
307 else if (c->frequency < 161000000)
308 band = 1;
309 else if (c->frequency < 444000000)
310 band = 2;
311 else if (c->frequency < 861000000)
312 band = 4;
313 else
314 return -EINVAL;
315
316 /* setup PLL filter */
317 switch (c->bandwidth_hz) {
318 case 6000000:
319 filter = 0;
320 break;
321
322 case 7000000:
323 filter = 0;
324 break;
325
326 case 8000000:
327 filter = 1;
328 break;
329
330 default:
331 return -EINVAL;
332 }
333
334 /* calculate divisor
335 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
336 */
337 tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
338
339 /* setup tuner buffer */
340 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
341 tuner_buf[1] = tuner_frequency & 0xff;
342 tuner_buf[2] = 0xca;
343 tuner_buf[3] = (cp << 5) | (filter << 3) | band;
344
345 if (fe->ops.i2c_gate_ctrl)
346 fe->ops.i2c_gate_ctrl(fe, 1);
347 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
348 pr_warn("could not write to tuner at addr: 0x%02x\n",
349 addr << 1);
350 return -EIO;
351 }
352 msleep(1);
353 return 0;
354 }
355
philips_tu1216_init(struct dvb_frontend * fe)356 static int philips_tu1216_init(struct dvb_frontend *fe)
357 {
358 struct saa7134_dev *dev = fe->dvb->priv;
359 struct tda1004x_state *state = fe->demodulator_priv;
360 u8 addr = state->config->tuner_address;
361 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
362 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
363
364 /* setup PLL configuration */
365 if (fe->ops.i2c_gate_ctrl)
366 fe->ops.i2c_gate_ctrl(fe, 1);
367 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
368 return -EIO;
369 msleep(1);
370
371 return 0;
372 }
373
374 /* ------------------------------------------------------------------ */
375
376 static struct tda1004x_config philips_tu1216_60_config = {
377 .demod_address = 0x8,
378 .invert = 1,
379 .invert_oclk = 0,
380 .xtal_freq = TDA10046_XTAL_4M,
381 .agc_config = TDA10046_AGC_DEFAULT,
382 .if_freq = TDA10046_FREQ_3617,
383 .tuner_address = 0x60,
384 .request_firmware = philips_tda1004x_request_firmware
385 };
386
387 static struct tda1004x_config philips_tu1216_61_config = {
388
389 .demod_address = 0x8,
390 .invert = 1,
391 .invert_oclk = 0,
392 .xtal_freq = TDA10046_XTAL_4M,
393 .agc_config = TDA10046_AGC_DEFAULT,
394 .if_freq = TDA10046_FREQ_3617,
395 .tuner_address = 0x61,
396 .request_firmware = philips_tda1004x_request_firmware
397 };
398
399 /* ------------------------------------------------------------------ */
400
philips_td1316_tuner_init(struct dvb_frontend * fe)401 static int philips_td1316_tuner_init(struct dvb_frontend *fe)
402 {
403 struct saa7134_dev *dev = fe->dvb->priv;
404 struct tda1004x_state *state = fe->demodulator_priv;
405 u8 addr = state->config->tuner_address;
406 static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
407 struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
408
409 /* setup PLL configuration */
410 if (fe->ops.i2c_gate_ctrl)
411 fe->ops.i2c_gate_ctrl(fe, 1);
412 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
413 return -EIO;
414 return 0;
415 }
416
philips_td1316_tuner_set_params(struct dvb_frontend * fe)417 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe)
418 {
419 return philips_tda6651_pll_set(fe);
420 }
421
philips_td1316_tuner_sleep(struct dvb_frontend * fe)422 static int philips_td1316_tuner_sleep(struct dvb_frontend *fe)
423 {
424 struct saa7134_dev *dev = fe->dvb->priv;
425 struct tda1004x_state *state = fe->demodulator_priv;
426 u8 addr = state->config->tuner_address;
427 static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
428 struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
429
430 /* switch the tuner to analog mode */
431 if (fe->ops.i2c_gate_ctrl)
432 fe->ops.i2c_gate_ctrl(fe, 1);
433 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
434 return -EIO;
435 return 0;
436 }
437
438 /* ------------------------------------------------------------------ */
439
philips_europa_tuner_init(struct dvb_frontend * fe)440 static int philips_europa_tuner_init(struct dvb_frontend *fe)
441 {
442 struct saa7134_dev *dev = fe->dvb->priv;
443 static u8 msg[] = { 0x00, 0x40};
444 struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
445
446
447 if (philips_td1316_tuner_init(fe))
448 return -EIO;
449 msleep(1);
450 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
451 return -EIO;
452
453 return 0;
454 }
455
philips_europa_tuner_sleep(struct dvb_frontend * fe)456 static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
457 {
458 struct saa7134_dev *dev = fe->dvb->priv;
459
460 static u8 msg[] = { 0x00, 0x14 };
461 struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
462
463 if (philips_td1316_tuner_sleep(fe))
464 return -EIO;
465
466 /* switch the board to analog mode */
467 if (fe->ops.i2c_gate_ctrl)
468 fe->ops.i2c_gate_ctrl(fe, 1);
469 i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
470 return 0;
471 }
472
philips_europa_demod_sleep(struct dvb_frontend * fe)473 static int philips_europa_demod_sleep(struct dvb_frontend *fe)
474 {
475 struct saa7134_dev *dev = fe->dvb->priv;
476
477 if (dev->original_demod_sleep)
478 dev->original_demod_sleep(fe);
479 fe->ops.i2c_gate_ctrl(fe, 1);
480 return 0;
481 }
482
483 static struct tda1004x_config philips_europa_config = {
484
485 .demod_address = 0x8,
486 .invert = 0,
487 .invert_oclk = 0,
488 .xtal_freq = TDA10046_XTAL_4M,
489 .agc_config = TDA10046_AGC_IFO_AUTO_POS,
490 .if_freq = TDA10046_FREQ_052,
491 .tuner_address = 0x61,
492 .request_firmware = philips_tda1004x_request_firmware
493 };
494
495 static struct tda1004x_config medion_cardbus = {
496 .demod_address = 0x08,
497 .invert = 1,
498 .invert_oclk = 0,
499 .xtal_freq = TDA10046_XTAL_16M,
500 .agc_config = TDA10046_AGC_IFO_AUTO_NEG,
501 .if_freq = TDA10046_FREQ_3613,
502 .tuner_address = 0x61,
503 .request_firmware = philips_tda1004x_request_firmware
504 };
505
506 static struct tda1004x_config technotrend_budget_t3000_config = {
507 .demod_address = 0x8,
508 .invert = 1,
509 .invert_oclk = 0,
510 .xtal_freq = TDA10046_XTAL_4M,
511 .agc_config = TDA10046_AGC_DEFAULT,
512 .if_freq = TDA10046_FREQ_3617,
513 .tuner_address = 0x63,
514 .request_firmware = philips_tda1004x_request_firmware
515 };
516
517 /* ------------------------------------------------------------------
518 * tda 1004x based cards with philips silicon tuner
519 */
520
tda8290_i2c_gate_ctrl(struct dvb_frontend * fe,int enable)521 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
522 {
523 struct tda1004x_state *state = fe->demodulator_priv;
524
525 u8 addr = state->config->i2c_gate;
526 static u8 tda8290_close[] = { 0x21, 0xc0};
527 static u8 tda8290_open[] = { 0x21, 0x80};
528 struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2};
529 if (enable) {
530 tda8290_msg.buf = tda8290_close;
531 } else {
532 tda8290_msg.buf = tda8290_open;
533 }
534 if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) {
535 pr_warn("could not access tda8290 I2C gate\n");
536 return -EIO;
537 }
538 msleep(20);
539 return 0;
540 }
541
philips_tda827x_tuner_init(struct dvb_frontend * fe)542 static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
543 {
544 struct saa7134_dev *dev = fe->dvb->priv;
545 struct tda1004x_state *state = fe->demodulator_priv;
546
547 switch (state->config->antenna_switch) {
548 case 0:
549 break;
550 case 1:
551 pr_debug("setting GPIO21 to 0 (TV antenna?)\n");
552 saa7134_set_gpio(dev, 21, 0);
553 break;
554 case 2:
555 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n");
556 saa7134_set_gpio(dev, 21, 1);
557 break;
558 }
559 return 0;
560 }
561
philips_tda827x_tuner_sleep(struct dvb_frontend * fe)562 static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
563 {
564 struct saa7134_dev *dev = fe->dvb->priv;
565 struct tda1004x_state *state = fe->demodulator_priv;
566
567 switch (state->config->antenna_switch) {
568 case 0:
569 break;
570 case 1:
571 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n");
572 saa7134_set_gpio(dev, 21, 1);
573 break;
574 case 2:
575 pr_debug("setting GPIO21 to 0 (TV antenna?)\n");
576 saa7134_set_gpio(dev, 21, 0);
577 break;
578 }
579 return 0;
580 }
581
configure_tda827x_fe(struct saa7134_dev * dev,struct tda1004x_config * cdec_conf,struct tda827x_config * tuner_conf)582 static int configure_tda827x_fe(struct saa7134_dev *dev,
583 struct tda1004x_config *cdec_conf,
584 struct tda827x_config *tuner_conf)
585 {
586 struct vb2_dvb_frontend *fe0;
587
588 /* Get the first frontend */
589 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
590
591 if (!fe0)
592 return -EINVAL;
593
594 fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
595 if (fe0->dvb.frontend) {
596 if (cdec_conf->i2c_gate)
597 fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
598 if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
599 cdec_conf->tuner_address,
600 &dev->i2c_adap, tuner_conf))
601 return 0;
602
603 pr_warn("no tda827x tuner found at addr: %02x\n",
604 cdec_conf->tuner_address);
605 }
606 return -EINVAL;
607 }
608
609 /* ------------------------------------------------------------------ */
610
611 static struct tda827x_config tda827x_cfg_0 = {
612 .init = philips_tda827x_tuner_init,
613 .sleep = philips_tda827x_tuner_sleep,
614 .config = 0,
615 .switch_addr = 0
616 };
617
618 static struct tda827x_config tda827x_cfg_1 = {
619 .init = philips_tda827x_tuner_init,
620 .sleep = philips_tda827x_tuner_sleep,
621 .config = 1,
622 .switch_addr = 0x4b
623 };
624
625 static struct tda827x_config tda827x_cfg_2 = {
626 .init = philips_tda827x_tuner_init,
627 .sleep = philips_tda827x_tuner_sleep,
628 .config = 2,
629 .switch_addr = 0x4b
630 };
631
632 static struct tda827x_config tda827x_cfg_2_sw42 = {
633 .init = philips_tda827x_tuner_init,
634 .sleep = philips_tda827x_tuner_sleep,
635 .config = 2,
636 .switch_addr = 0x42
637 };
638
639 /* ------------------------------------------------------------------ */
640
641 static struct tda1004x_config tda827x_lifeview_config = {
642 .demod_address = 0x08,
643 .invert = 1,
644 .invert_oclk = 0,
645 .xtal_freq = TDA10046_XTAL_16M,
646 .agc_config = TDA10046_AGC_TDA827X,
647 .gpio_config = TDA10046_GP11_I,
648 .if_freq = TDA10046_FREQ_045,
649 .tuner_address = 0x60,
650 .request_firmware = philips_tda1004x_request_firmware
651 };
652
653 static struct tda1004x_config philips_tiger_config = {
654 .demod_address = 0x08,
655 .invert = 1,
656 .invert_oclk = 0,
657 .xtal_freq = TDA10046_XTAL_16M,
658 .agc_config = TDA10046_AGC_TDA827X,
659 .gpio_config = TDA10046_GP11_I,
660 .if_freq = TDA10046_FREQ_045,
661 .i2c_gate = 0x4b,
662 .tuner_address = 0x61,
663 .antenna_switch= 1,
664 .request_firmware = philips_tda1004x_request_firmware
665 };
666
667 static struct tda1004x_config cinergy_ht_config = {
668 .demod_address = 0x08,
669 .invert = 1,
670 .invert_oclk = 0,
671 .xtal_freq = TDA10046_XTAL_16M,
672 .agc_config = TDA10046_AGC_TDA827X,
673 .gpio_config = TDA10046_GP01_I,
674 .if_freq = TDA10046_FREQ_045,
675 .i2c_gate = 0x4b,
676 .tuner_address = 0x61,
677 .request_firmware = philips_tda1004x_request_firmware
678 };
679
680 static struct tda1004x_config cinergy_ht_pci_config = {
681 .demod_address = 0x08,
682 .invert = 1,
683 .invert_oclk = 0,
684 .xtal_freq = TDA10046_XTAL_16M,
685 .agc_config = TDA10046_AGC_TDA827X,
686 .gpio_config = TDA10046_GP01_I,
687 .if_freq = TDA10046_FREQ_045,
688 .i2c_gate = 0x4b,
689 .tuner_address = 0x60,
690 .request_firmware = philips_tda1004x_request_firmware
691 };
692
693 static struct tda1004x_config philips_tiger_s_config = {
694 .demod_address = 0x08,
695 .invert = 1,
696 .invert_oclk = 0,
697 .xtal_freq = TDA10046_XTAL_16M,
698 .agc_config = TDA10046_AGC_TDA827X,
699 .gpio_config = TDA10046_GP01_I,
700 .if_freq = TDA10046_FREQ_045,
701 .i2c_gate = 0x4b,
702 .tuner_address = 0x61,
703 .antenna_switch= 1,
704 .request_firmware = philips_tda1004x_request_firmware
705 };
706
707 static struct tda1004x_config pinnacle_pctv_310i_config = {
708 .demod_address = 0x08,
709 .invert = 1,
710 .invert_oclk = 0,
711 .xtal_freq = TDA10046_XTAL_16M,
712 .agc_config = TDA10046_AGC_TDA827X,
713 .gpio_config = TDA10046_GP11_I,
714 .if_freq = TDA10046_FREQ_045,
715 .i2c_gate = 0x4b,
716 .tuner_address = 0x61,
717 .request_firmware = philips_tda1004x_request_firmware
718 };
719
720 static struct tda1004x_config hauppauge_hvr_1110_config = {
721 .demod_address = 0x08,
722 .invert = 1,
723 .invert_oclk = 0,
724 .xtal_freq = TDA10046_XTAL_16M,
725 .agc_config = TDA10046_AGC_TDA827X,
726 .gpio_config = TDA10046_GP11_I,
727 .if_freq = TDA10046_FREQ_045,
728 .i2c_gate = 0x4b,
729 .tuner_address = 0x61,
730 .request_firmware = philips_tda1004x_request_firmware
731 };
732
733 static struct tda1004x_config asus_p7131_dual_config = {
734 .demod_address = 0x08,
735 .invert = 1,
736 .invert_oclk = 0,
737 .xtal_freq = TDA10046_XTAL_16M,
738 .agc_config = TDA10046_AGC_TDA827X,
739 .gpio_config = TDA10046_GP11_I,
740 .if_freq = TDA10046_FREQ_045,
741 .i2c_gate = 0x4b,
742 .tuner_address = 0x61,
743 .antenna_switch= 2,
744 .request_firmware = philips_tda1004x_request_firmware
745 };
746
747 static struct tda1004x_config lifeview_trio_config = {
748 .demod_address = 0x09,
749 .invert = 1,
750 .invert_oclk = 0,
751 .xtal_freq = TDA10046_XTAL_16M,
752 .agc_config = TDA10046_AGC_TDA827X,
753 .gpio_config = TDA10046_GP00_I,
754 .if_freq = TDA10046_FREQ_045,
755 .tuner_address = 0x60,
756 .request_firmware = philips_tda1004x_request_firmware
757 };
758
759 static struct tda1004x_config tevion_dvbt220rf_config = {
760 .demod_address = 0x08,
761 .invert = 1,
762 .invert_oclk = 0,
763 .xtal_freq = TDA10046_XTAL_16M,
764 .agc_config = TDA10046_AGC_TDA827X,
765 .gpio_config = TDA10046_GP11_I,
766 .if_freq = TDA10046_FREQ_045,
767 .tuner_address = 0x60,
768 .request_firmware = philips_tda1004x_request_firmware
769 };
770
771 static struct tda1004x_config md8800_dvbt_config = {
772 .demod_address = 0x08,
773 .invert = 1,
774 .invert_oclk = 0,
775 .xtal_freq = TDA10046_XTAL_16M,
776 .agc_config = TDA10046_AGC_TDA827X,
777 .gpio_config = TDA10046_GP01_I,
778 .if_freq = TDA10046_FREQ_045,
779 .i2c_gate = 0x4b,
780 .tuner_address = 0x60,
781 .request_firmware = philips_tda1004x_request_firmware
782 };
783
784 static struct tda1004x_config asus_p7131_4871_config = {
785 .demod_address = 0x08,
786 .invert = 1,
787 .invert_oclk = 0,
788 .xtal_freq = TDA10046_XTAL_16M,
789 .agc_config = TDA10046_AGC_TDA827X,
790 .gpio_config = TDA10046_GP01_I,
791 .if_freq = TDA10046_FREQ_045,
792 .i2c_gate = 0x4b,
793 .tuner_address = 0x61,
794 .antenna_switch= 2,
795 .request_firmware = philips_tda1004x_request_firmware
796 };
797
798 static struct tda1004x_config asus_p7131_hybrid_lna_config = {
799 .demod_address = 0x08,
800 .invert = 1,
801 .invert_oclk = 0,
802 .xtal_freq = TDA10046_XTAL_16M,
803 .agc_config = TDA10046_AGC_TDA827X,
804 .gpio_config = TDA10046_GP11_I,
805 .if_freq = TDA10046_FREQ_045,
806 .i2c_gate = 0x4b,
807 .tuner_address = 0x61,
808 .antenna_switch= 2,
809 .request_firmware = philips_tda1004x_request_firmware
810 };
811
812 static struct tda1004x_config kworld_dvb_t_210_config = {
813 .demod_address = 0x08,
814 .invert = 1,
815 .invert_oclk = 0,
816 .xtal_freq = TDA10046_XTAL_16M,
817 .agc_config = TDA10046_AGC_TDA827X,
818 .gpio_config = TDA10046_GP11_I,
819 .if_freq = TDA10046_FREQ_045,
820 .i2c_gate = 0x4b,
821 .tuner_address = 0x61,
822 .antenna_switch= 1,
823 .request_firmware = philips_tda1004x_request_firmware
824 };
825
826 static struct tda1004x_config avermedia_super_007_config = {
827 .demod_address = 0x08,
828 .invert = 1,
829 .invert_oclk = 0,
830 .xtal_freq = TDA10046_XTAL_16M,
831 .agc_config = TDA10046_AGC_TDA827X,
832 .gpio_config = TDA10046_GP01_I,
833 .if_freq = TDA10046_FREQ_045,
834 .i2c_gate = 0x4b,
835 .tuner_address = 0x60,
836 .antenna_switch= 1,
837 .request_firmware = philips_tda1004x_request_firmware
838 };
839
840 static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
841 .demod_address = 0x08,
842 .invert = 1,
843 .invert_oclk = 0,
844 .xtal_freq = TDA10046_XTAL_16M,
845 .agc_config = TDA10046_AGC_TDA827X,
846 .gpio_config = TDA10046_GP01_I,
847 .if_freq = TDA10046_FREQ_045,
848 .i2c_gate = 0x42,
849 .tuner_address = 0x61,
850 .antenna_switch = 1,
851 .request_firmware = philips_tda1004x_request_firmware
852 };
853
854 static struct tda1004x_config asus_tiger_3in1_config = {
855 .demod_address = 0x0b,
856 .invert = 1,
857 .invert_oclk = 0,
858 .xtal_freq = TDA10046_XTAL_16M,
859 .agc_config = TDA10046_AGC_TDA827X,
860 .gpio_config = TDA10046_GP11_I,
861 .if_freq = TDA10046_FREQ_045,
862 .i2c_gate = 0x4b,
863 .tuner_address = 0x61,
864 .antenna_switch = 1,
865 .request_firmware = philips_tda1004x_request_firmware
866 };
867
868 static struct tda1004x_config asus_ps3_100_config = {
869 .demod_address = 0x0b,
870 .invert = 1,
871 .invert_oclk = 0,
872 .xtal_freq = TDA10046_XTAL_16M,
873 .agc_config = TDA10046_AGC_TDA827X,
874 .gpio_config = TDA10046_GP11_I,
875 .if_freq = TDA10046_FREQ_045,
876 .i2c_gate = 0x4b,
877 .tuner_address = 0x61,
878 .antenna_switch = 1,
879 .request_firmware = philips_tda1004x_request_firmware
880 };
881
882 /* ------------------------------------------------------------------
883 * special case: this card uses saa713x GPIO22 for the mode switch
884 */
885
ads_duo_tuner_init(struct dvb_frontend * fe)886 static int ads_duo_tuner_init(struct dvb_frontend *fe)
887 {
888 struct saa7134_dev *dev = fe->dvb->priv;
889 philips_tda827x_tuner_init(fe);
890 /* route TDA8275a AGC input to the channel decoder */
891 saa7134_set_gpio(dev, 22, 1);
892 return 0;
893 }
894
ads_duo_tuner_sleep(struct dvb_frontend * fe)895 static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
896 {
897 struct saa7134_dev *dev = fe->dvb->priv;
898 /* route TDA8275a AGC input to the analog IF chip*/
899 saa7134_set_gpio(dev, 22, 0);
900 philips_tda827x_tuner_sleep(fe);
901 return 0;
902 }
903
904 static struct tda827x_config ads_duo_cfg = {
905 .init = ads_duo_tuner_init,
906 .sleep = ads_duo_tuner_sleep,
907 .config = 0
908 };
909
910 static struct tda1004x_config ads_tech_duo_config = {
911 .demod_address = 0x08,
912 .invert = 1,
913 .invert_oclk = 0,
914 .xtal_freq = TDA10046_XTAL_16M,
915 .agc_config = TDA10046_AGC_TDA827X,
916 .gpio_config = TDA10046_GP00_I,
917 .if_freq = TDA10046_FREQ_045,
918 .tuner_address = 0x61,
919 .request_firmware = philips_tda1004x_request_firmware
920 };
921
922 static struct zl10353_config behold_h6_config = {
923 .demod_address = 0x1e>>1,
924 .no_tuner = 1,
925 .parallel_ts = 1,
926 .disable_i2c_gate_ctrl = 1,
927 };
928
929 static struct xc5000_config behold_x7_tunerconfig = {
930 .i2c_address = 0xc2>>1,
931 .if_khz = 4560,
932 .radio_input = XC5000_RADIO_FM1,
933 };
934
935 static struct zl10353_config behold_x7_config = {
936 .demod_address = 0x1e>>1,
937 .if2 = 45600,
938 .no_tuner = 1,
939 .parallel_ts = 1,
940 .disable_i2c_gate_ctrl = 1,
941 };
942
943 static struct zl10353_config videomate_t750_zl10353_config = {
944 .demod_address = 0x0f,
945 .no_tuner = 1,
946 .parallel_ts = 1,
947 .disable_i2c_gate_ctrl = 1,
948 };
949
950 static struct qt1010_config videomate_t750_qt1010_config = {
951 .i2c_address = 0x62
952 };
953
954
955 /* ==================================================================
956 * tda10086 based DVB-S cards, helper functions
957 */
958
959 static struct tda10086_config flydvbs = {
960 .demod_address = 0x0e,
961 .invert = 0,
962 .diseqc_tone = 0,
963 .xtal_freq = TDA10086_XTAL_16M,
964 };
965
966 static struct tda10086_config sd1878_4m = {
967 .demod_address = 0x0e,
968 .invert = 0,
969 .diseqc_tone = 0,
970 .xtal_freq = TDA10086_XTAL_4M,
971 };
972
973 /* ------------------------------------------------------------------
974 * special case: lnb supply is connected to the gated i2c
975 */
976
md8800_set_voltage(struct dvb_frontend * fe,enum fe_sec_voltage voltage)977 static int md8800_set_voltage(struct dvb_frontend *fe,
978 enum fe_sec_voltage voltage)
979 {
980 int res = -EIO;
981 struct saa7134_dev *dev = fe->dvb->priv;
982 if (fe->ops.i2c_gate_ctrl) {
983 fe->ops.i2c_gate_ctrl(fe, 1);
984 if (dev->original_set_voltage)
985 res = dev->original_set_voltage(fe, voltage);
986 fe->ops.i2c_gate_ctrl(fe, 0);
987 }
988 return res;
989 };
990
md8800_set_high_voltage(struct dvb_frontend * fe,long arg)991 static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg)
992 {
993 int res = -EIO;
994 struct saa7134_dev *dev = fe->dvb->priv;
995 if (fe->ops.i2c_gate_ctrl) {
996 fe->ops.i2c_gate_ctrl(fe, 1);
997 if (dev->original_set_high_voltage)
998 res = dev->original_set_high_voltage(fe, arg);
999 fe->ops.i2c_gate_ctrl(fe, 0);
1000 }
1001 return res;
1002 };
1003
md8800_set_voltage2(struct dvb_frontend * fe,enum fe_sec_voltage voltage)1004 static int md8800_set_voltage2(struct dvb_frontend *fe,
1005 enum fe_sec_voltage voltage)
1006 {
1007 struct saa7134_dev *dev = fe->dvb->priv;
1008 u8 wbuf[2] = { 0x1f, 00 };
1009 u8 rbuf;
1010 struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 },
1011 { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } };
1012
1013 if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2)
1014 return -EIO;
1015 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
1016 if (voltage == SEC_VOLTAGE_18)
1017 wbuf[1] = rbuf | 0x10;
1018 else
1019 wbuf[1] = rbuf & 0xef;
1020 msg[0].len = 2;
1021 i2c_transfer(&dev->i2c_adap, msg, 1);
1022 return 0;
1023 }
1024
md8800_set_high_voltage2(struct dvb_frontend * fe,long arg)1025 static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg)
1026 {
1027 pr_warn("%s: sorry can't set high LNB supply voltage from here\n",
1028 __func__);
1029 return -EIO;
1030 }
1031
1032 /* ==================================================================
1033 * nxt200x based ATSC cards, helper functions
1034 */
1035
1036 static const struct nxt200x_config avertvhda180 = {
1037 .demod_address = 0x0a,
1038 };
1039
1040 static const struct nxt200x_config kworldatsc110 = {
1041 .demod_address = 0x0a,
1042 };
1043
1044 /* ------------------------------------------------------------------ */
1045
1046 static struct mt312_config avertv_a700_mt312 = {
1047 .demod_address = 0x0e,
1048 .voltage_inverted = 1,
1049 };
1050
1051 static struct zl10036_config avertv_a700_tuner = {
1052 .tuner_address = 0x60,
1053 };
1054
1055 static struct mt312_config zl10313_compro_s350_config = {
1056 .demod_address = 0x0e,
1057 };
1058
1059 static struct mt312_config zl10313_avermedia_a706_config = {
1060 .demod_address = 0x0e,
1061 };
1062
1063 static struct lgdt3305_config hcw_lgdt3305_config = {
1064 .i2c_addr = 0x0e,
1065 .mpeg_mode = LGDT3305_MPEG_SERIAL,
1066 .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
1067 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
1068 .deny_i2c_rptr = 1,
1069 .spectral_inversion = 1,
1070 .qam_if_khz = 4000,
1071 .vsb_if_khz = 3250,
1072 };
1073
1074 static struct tda10048_config hcw_tda10048_config = {
1075 .demod_address = 0x10 >> 1,
1076 .output_mode = TDA10048_SERIAL_OUTPUT,
1077 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1078 .inversion = TDA10048_INVERSION_ON,
1079 .dtv6_if_freq_khz = TDA10048_IF_3300,
1080 .dtv7_if_freq_khz = TDA10048_IF_3500,
1081 .dtv8_if_freq_khz = TDA10048_IF_4000,
1082 .clk_freq_khz = TDA10048_CLK_16000,
1083 .disable_gate_access = 1,
1084 };
1085
1086 static struct tda18271_std_map hauppauge_tda18271_std_map = {
1087 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
1088 .if_lvl = 1, .rfagc_top = 0x58, },
1089 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
1090 .if_lvl = 1, .rfagc_top = 0x58, },
1091 };
1092
1093 static struct tda18271_config hcw_tda18271_config = {
1094 .std_map = &hauppauge_tda18271_std_map,
1095 .gate = TDA18271_GATE_ANALOG,
1096 .config = 3,
1097 .output_opt = TDA18271_OUTPUT_LT_OFF,
1098 };
1099
1100 static struct tda829x_config tda829x_no_probe = {
1101 .probe_tuner = TDA829X_DONT_PROBE,
1102 };
1103
1104 static struct tda10048_config zolid_tda10048_config = {
1105 .demod_address = 0x10 >> 1,
1106 .output_mode = TDA10048_PARALLEL_OUTPUT,
1107 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1108 .inversion = TDA10048_INVERSION_ON,
1109 .dtv6_if_freq_khz = TDA10048_IF_3300,
1110 .dtv7_if_freq_khz = TDA10048_IF_3500,
1111 .dtv8_if_freq_khz = TDA10048_IF_4000,
1112 .clk_freq_khz = TDA10048_CLK_16000,
1113 .disable_gate_access = 1,
1114 };
1115
1116 static struct tda18271_config zolid_tda18271_config = {
1117 .gate = TDA18271_GATE_ANALOG,
1118 };
1119
1120 static struct tda10048_config dtv1000s_tda10048_config = {
1121 .demod_address = 0x10 >> 1,
1122 .output_mode = TDA10048_PARALLEL_OUTPUT,
1123 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1124 .inversion = TDA10048_INVERSION_ON,
1125 .dtv6_if_freq_khz = TDA10048_IF_3300,
1126 .dtv7_if_freq_khz = TDA10048_IF_3800,
1127 .dtv8_if_freq_khz = TDA10048_IF_4300,
1128 .clk_freq_khz = TDA10048_CLK_16000,
1129 .disable_gate_access = 1,
1130 };
1131
1132 static struct tda18271_std_map dtv1000s_tda18271_std_map = {
1133 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
1134 .if_lvl = 1, .rfagc_top = 0x37, },
1135 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
1136 .if_lvl = 1, .rfagc_top = 0x37, },
1137 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
1138 .if_lvl = 1, .rfagc_top = 0x37, },
1139 };
1140
1141 static struct tda18271_config dtv1000s_tda18271_config = {
1142 .std_map = &dtv1000s_tda18271_std_map,
1143 .gate = TDA18271_GATE_ANALOG,
1144 };
1145
1146 static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = {
1147 .prod = LGS8GXX_PROD_LGS8G75,
1148 .demod_address = 0x1d,
1149 .serial_ts = 0,
1150 .ts_clk_pol = 1,
1151 .ts_clk_gated = 0,
1152 .if_clk_freq = 30400, /* 30.4 MHz */
1153 .if_freq = 4000, /* 4.00 MHz */
1154 .if_neg_center = 0,
1155 .ext_adc = 0,
1156 .adc_signed = 1,
1157 .adc_vpp = 3, /* 2.0 Vpp */
1158 .if_neg_edge = 1,
1159 };
1160
1161 static struct tda18271_config prohdtv_pro2_tda18271_config = {
1162 .gate = TDA18271_GATE_ANALOG,
1163 .output_opt = TDA18271_OUTPUT_LT_OFF,
1164 };
1165
1166 static struct tda18271_std_map kworld_tda18271_std_map = {
1167 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3,
1168 .if_lvl = 6, .rfagc_top = 0x37 },
1169 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
1170 .if_lvl = 6, .rfagc_top = 0x37 },
1171 };
1172
1173 static struct tda18271_config kworld_pc150u_tda18271_config = {
1174 .std_map = &kworld_tda18271_std_map,
1175 .gate = TDA18271_GATE_ANALOG,
1176 .output_opt = TDA18271_OUTPUT_LT_OFF,
1177 .config = 3, /* Use tuner callback for AGC */
1178 .rf_cal_on_startup = 1
1179 };
1180
1181 static struct s5h1411_config kworld_s5h1411_config = {
1182 .output_mode = S5H1411_PARALLEL_OUTPUT,
1183 .gpio = S5H1411_GPIO_OFF,
1184 .qam_if = S5H1411_IF_4000,
1185 .vsb_if = S5H1411_IF_3250,
1186 .inversion = S5H1411_INVERSION_ON,
1187 .status_mode = S5H1411_DEMODLOCKING,
1188 .mpeg_timing =
1189 S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
1190 };
1191
1192
1193 /* ==================================================================
1194 * Core code
1195 */
1196
dvb_init(struct saa7134_dev * dev)1197 static int dvb_init(struct saa7134_dev *dev)
1198 {
1199 int ret;
1200 int attach_xc3028 = 0;
1201 struct vb2_dvb_frontend *fe0;
1202 struct vb2_queue *q;
1203
1204 /* FIXME: add support for multi-frontend */
1205 mutex_init(&dev->frontends.lock);
1206 INIT_LIST_HEAD(&dev->frontends.felist);
1207
1208 pr_info("%s() allocating 1 frontend\n", __func__);
1209 fe0 = vb2_dvb_alloc_frontend(&dev->frontends, 1);
1210 if (!fe0) {
1211 pr_err("%s() failed to alloc\n", __func__);
1212 return -ENOMEM;
1213 }
1214
1215 /* init struct vb2_dvb */
1216 dev->ts.nr_bufs = 32;
1217 dev->ts.nr_packets = 32*4;
1218 fe0->dvb.name = dev->name;
1219 q = &fe0->dvb.dvbq;
1220 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1221 q->io_modes = VB2_MMAP | VB2_READ;
1222 q->drv_priv = &dev->ts_q;
1223 q->ops = &saa7134_ts_qops;
1224 q->mem_ops = &vb2_dma_sg_memops;
1225 q->buf_struct_size = sizeof(struct saa7134_buf);
1226 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
1227 q->lock = &dev->lock;
1228 q->dev = &dev->pci->dev;
1229 ret = vb2_queue_init(q);
1230 if (ret) {
1231 vb2_dvb_dealloc_frontends(&dev->frontends);
1232 return ret;
1233 }
1234
1235 switch (dev->board) {
1236 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
1237 pr_debug("pinnacle 300i dvb setup\n");
1238 fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
1239 &dev->i2c_adap);
1240 if (fe0->dvb.frontend) {
1241 fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
1242 }
1243 break;
1244 case SAA7134_BOARD_AVERMEDIA_777:
1245 case SAA7134_BOARD_AVERMEDIA_A16AR:
1246 pr_debug("avertv 777 dvb setup\n");
1247 fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
1248 &dev->i2c_adap);
1249 if (fe0->dvb.frontend) {
1250 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1251 &dev->i2c_adap, 0x61,
1252 TUNER_PHILIPS_TD1316);
1253 }
1254 break;
1255 case SAA7134_BOARD_AVERMEDIA_A16D:
1256 pr_debug("AverMedia A16D dvb setup\n");
1257 fe0->dvb.frontend = dvb_attach(mt352_attach,
1258 &avermedia_xc3028_mt352_dev,
1259 &dev->i2c_adap);
1260 attach_xc3028 = 1;
1261 break;
1262 case SAA7134_BOARD_MD7134:
1263 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1264 &medion_cardbus,
1265 &dev->i2c_adap);
1266 if (fe0->dvb.frontend) {
1267 /*
1268 * The TV tuner on this board is actually NOT
1269 * behind the demod i2c gate.
1270 * However, the demod EEPROM is indeed there and it
1271 * conflicts with the SAA7134 chip config EEPROM
1272 * if the i2c gate is open (since they have same
1273 * bus addresses) resulting in card PCI SVID / SSID
1274 * being garbage after a reboot from time to time.
1275 *
1276 * Let's just leave the gate permanently closed -
1277 * saa7134_i2c_eeprom_md7134_gate() will close it for
1278 * us at probe time if it was open for some reason.
1279 */
1280 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
1281 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1282 &dev->i2c_adap, medion_cardbus.tuner_address,
1283 TUNER_PHILIPS_FMD1216ME_MK3);
1284 }
1285 break;
1286 case SAA7134_BOARD_PHILIPS_TOUGH:
1287 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1288 &philips_tu1216_60_config,
1289 &dev->i2c_adap);
1290 if (fe0->dvb.frontend) {
1291 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1292 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1293 }
1294 break;
1295 case SAA7134_BOARD_FLYDVBTDUO:
1296 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
1297 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1298 &tda827x_cfg_0) < 0)
1299 goto detach_frontend;
1300 break;
1301 case SAA7134_BOARD_PHILIPS_EUROPA:
1302 case SAA7134_BOARD_VIDEOMATE_DVBT_300:
1303 case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
1304 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1305 &philips_europa_config,
1306 &dev->i2c_adap);
1307 if (fe0->dvb.frontend) {
1308 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1309 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1310 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1311 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1312 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1313 }
1314 break;
1315 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
1316 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1317 &technotrend_budget_t3000_config,
1318 &dev->i2c_adap);
1319 if (fe0->dvb.frontend) {
1320 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1321 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1322 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1323 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1324 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1325 }
1326 break;
1327 case SAA7134_BOARD_VIDEOMATE_DVBT_200:
1328 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1329 &philips_tu1216_61_config,
1330 &dev->i2c_adap);
1331 if (fe0->dvb.frontend) {
1332 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1333 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1334 }
1335 break;
1336 case SAA7134_BOARD_KWORLD_DVBT_210:
1337 if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
1338 &tda827x_cfg_2) < 0)
1339 goto detach_frontend;
1340 break;
1341 case SAA7134_BOARD_HAUPPAUGE_HVR1120:
1342 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1343 &hcw_tda10048_config,
1344 &dev->i2c_adap);
1345 if (fe0->dvb.frontend != NULL) {
1346 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1347 &dev->i2c_adap, 0x4b,
1348 &tda829x_no_probe);
1349 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1350 0x60, &dev->i2c_adap,
1351 &hcw_tda18271_config);
1352 }
1353 break;
1354 case SAA7134_BOARD_PHILIPS_TIGER:
1355 if (configure_tda827x_fe(dev, &philips_tiger_config,
1356 &tda827x_cfg_0) < 0)
1357 goto detach_frontend;
1358 break;
1359 case SAA7134_BOARD_PINNACLE_PCTV_310i:
1360 if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
1361 &tda827x_cfg_1) < 0)
1362 goto detach_frontend;
1363 break;
1364 case SAA7134_BOARD_HAUPPAUGE_HVR1110:
1365 if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
1366 &tda827x_cfg_1) < 0)
1367 goto detach_frontend;
1368 break;
1369 case SAA7134_BOARD_HAUPPAUGE_HVR1150:
1370 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
1371 &hcw_lgdt3305_config,
1372 &dev->i2c_adap);
1373 if (fe0->dvb.frontend) {
1374 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1375 &dev->i2c_adap, 0x4b,
1376 &tda829x_no_probe);
1377 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1378 0x60, &dev->i2c_adap,
1379 &hcw_tda18271_config);
1380 }
1381 break;
1382 case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
1383 if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
1384 &tda827x_cfg_0) < 0)
1385 goto detach_frontend;
1386 break;
1387 case SAA7134_BOARD_FLYDVBT_LR301:
1388 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1389 &tda827x_cfg_0) < 0)
1390 goto detach_frontend;
1391 break;
1392 case SAA7134_BOARD_FLYDVB_TRIO:
1393 if (!use_frontend) { /* terrestrial */
1394 if (configure_tda827x_fe(dev, &lifeview_trio_config,
1395 &tda827x_cfg_0) < 0)
1396 goto detach_frontend;
1397 } else { /* satellite */
1398 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
1399 if (fe0->dvb.frontend) {
1400 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
1401 &dev->i2c_adap, 0) == NULL) {
1402 pr_warn("%s: Lifeview Trio, No tda826x found!\n",
1403 __func__);
1404 goto detach_frontend;
1405 }
1406 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1407 &dev->i2c_adap,
1408 0x08, 0, 0, false) == NULL) {
1409 pr_warn("%s: Lifeview Trio, No ISL6421 found!\n",
1410 __func__);
1411 goto detach_frontend;
1412 }
1413 }
1414 }
1415 break;
1416 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
1417 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
1418 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1419 &ads_tech_duo_config,
1420 &dev->i2c_adap);
1421 if (fe0->dvb.frontend) {
1422 if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
1423 ads_tech_duo_config.tuner_address, &dev->i2c_adap,
1424 &ads_duo_cfg) == NULL) {
1425 pr_warn("no tda827x tuner found at addr: %02x\n",
1426 ads_tech_duo_config.tuner_address);
1427 goto detach_frontend;
1428 }
1429 } else
1430 pr_warn("failed to attach tda10046\n");
1431 break;
1432 case SAA7134_BOARD_TEVION_DVBT_220RF:
1433 if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
1434 &tda827x_cfg_0) < 0)
1435 goto detach_frontend;
1436 break;
1437 case SAA7134_BOARD_MEDION_MD8800_QUADRO:
1438 if (!use_frontend) { /* terrestrial */
1439 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1440 &tda827x_cfg_0) < 0)
1441 goto detach_frontend;
1442 } else { /* satellite */
1443 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1444 &flydvbs, &dev->i2c_adap);
1445 if (fe0->dvb.frontend) {
1446 struct dvb_frontend *fe = fe0->dvb.frontend;
1447 u8 dev_id = dev->eedata[2];
1448 u8 data = 0xc4;
1449 struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
1450
1451 if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
1452 0x60, &dev->i2c_adap, 0) == NULL) {
1453 pr_warn("%s: Medion Quadro, no tda826x found !\n",
1454 __func__);
1455 goto detach_frontend;
1456 }
1457 if (dev_id != 0x08) {
1458 /* we need to open the i2c gate (we know it exists) */
1459 fe->ops.i2c_gate_ctrl(fe, 1);
1460 if (dvb_attach(isl6405_attach, fe,
1461 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1462 pr_warn("%s: Medion Quadro, no ISL6405 found !\n",
1463 __func__);
1464 goto detach_frontend;
1465 }
1466 if (dev_id == 0x07) {
1467 /* fire up the 2nd section of the LNB supply since
1468 we can't do this from the other section */
1469 msg.buf = &data;
1470 i2c_transfer(&dev->i2c_adap, &msg, 1);
1471 }
1472 fe->ops.i2c_gate_ctrl(fe, 0);
1473 dev->original_set_voltage = fe->ops.set_voltage;
1474 fe->ops.set_voltage = md8800_set_voltage;
1475 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1476 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1477 } else {
1478 fe->ops.set_voltage = md8800_set_voltage2;
1479 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
1480 }
1481 }
1482 }
1483 break;
1484 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
1485 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
1486 &dev->i2c_adap);
1487 if (fe0->dvb.frontend)
1488 dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
1489 NULL, DVB_PLL_TDHU2);
1490 break;
1491 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
1492 case SAA7134_BOARD_KWORLD_ATSC110:
1493 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
1494 &dev->i2c_adap);
1495 if (fe0->dvb.frontend)
1496 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1497 &dev->i2c_adap, 0x61,
1498 TUNER_PHILIPS_TUV1236D);
1499 break;
1500 case SAA7134_BOARD_KWORLD_PC150U:
1501 saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */
1502 saa7134_tuner_callback(dev, 0,
1503 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1504 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1505 &kworld_s5h1411_config,
1506 &dev->i2c_adap);
1507 if (fe0->dvb.frontend != NULL) {
1508 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1509 &dev->i2c_adap, 0x4b,
1510 &tda829x_no_probe);
1511 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1512 0x60, &dev->i2c_adap,
1513 &kworld_pc150u_tda18271_config);
1514 }
1515 break;
1516 case SAA7134_BOARD_FLYDVBS_LR300:
1517 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1518 &dev->i2c_adap);
1519 if (fe0->dvb.frontend) {
1520 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1521 &dev->i2c_adap, 0) == NULL) {
1522 pr_warn("%s: No tda826x found!\n", __func__);
1523 goto detach_frontend;
1524 }
1525 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1526 &dev->i2c_adap,
1527 0x08, 0, 0, false) == NULL) {
1528 pr_warn("%s: No ISL6421 found!\n", __func__);
1529 goto detach_frontend;
1530 }
1531 }
1532 break;
1533 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
1534 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1535 &medion_cardbus,
1536 &dev->i2c_adap);
1537 if (fe0->dvb.frontend) {
1538 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1539 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1540
1541 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1542 &dev->i2c_adap, medion_cardbus.tuner_address,
1543 TUNER_PHILIPS_FMD1216ME_MK3);
1544 }
1545 break;
1546 case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
1547 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1548 &philips_europa_config,
1549 &dev->i2c_adap);
1550 if (fe0->dvb.frontend) {
1551 fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
1552 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1553 }
1554 break;
1555 case SAA7134_BOARD_CINERGY_HT_PCMCIA:
1556 if (configure_tda827x_fe(dev, &cinergy_ht_config,
1557 &tda827x_cfg_0) < 0)
1558 goto detach_frontend;
1559 break;
1560 case SAA7134_BOARD_CINERGY_HT_PCI:
1561 if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
1562 &tda827x_cfg_0) < 0)
1563 goto detach_frontend;
1564 break;
1565 case SAA7134_BOARD_PHILIPS_TIGER_S:
1566 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1567 &tda827x_cfg_2) < 0)
1568 goto detach_frontend;
1569 break;
1570 case SAA7134_BOARD_ASUS_P7131_4871:
1571 if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
1572 &tda827x_cfg_2) < 0)
1573 goto detach_frontend;
1574 break;
1575 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
1576 if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
1577 &tda827x_cfg_2) < 0)
1578 goto detach_frontend;
1579 break;
1580 case SAA7134_BOARD_AVERMEDIA_SUPER_007:
1581 if (configure_tda827x_fe(dev, &avermedia_super_007_config,
1582 &tda827x_cfg_0) < 0)
1583 goto detach_frontend;
1584 break;
1585 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
1586 if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
1587 &tda827x_cfg_2_sw42) < 0)
1588 goto detach_frontend;
1589 break;
1590 case SAA7134_BOARD_PHILIPS_SNAKE:
1591 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1592 &dev->i2c_adap);
1593 if (fe0->dvb.frontend) {
1594 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1595 &dev->i2c_adap, 0) == NULL) {
1596 pr_warn("%s: No tda826x found!\n", __func__);
1597 goto detach_frontend;
1598 }
1599 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1600 &dev->i2c_adap, 0, 0) == NULL) {
1601 pr_warn("%s: No lnbp21 found!\n", __func__);
1602 goto detach_frontend;
1603 }
1604 }
1605 break;
1606 case SAA7134_BOARD_CREATIX_CTX953:
1607 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1608 &tda827x_cfg_0) < 0)
1609 goto detach_frontend;
1610 break;
1611 case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
1612 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1613 &tda827x_cfg_2) < 0)
1614 goto detach_frontend;
1615 break;
1616 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
1617 pr_debug("AverMedia E506R dvb setup\n");
1618 saa7134_set_gpio(dev, 25, 0);
1619 msleep(10);
1620 saa7134_set_gpio(dev, 25, 1);
1621 fe0->dvb.frontend = dvb_attach(mt352_attach,
1622 &avermedia_xc3028_mt352_dev,
1623 &dev->i2c_adap);
1624 attach_xc3028 = 1;
1625 break;
1626 case SAA7134_BOARD_MD7134_BRIDGE_2:
1627 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1628 &sd1878_4m, &dev->i2c_adap);
1629 if (fe0->dvb.frontend) {
1630 struct dvb_frontend *fe;
1631 if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
1632 &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
1633 pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n",
1634 __func__);
1635 goto detach_frontend;
1636 }
1637 /* we need to open the i2c gate (we know it exists) */
1638 fe = fe0->dvb.frontend;
1639 fe->ops.i2c_gate_ctrl(fe, 1);
1640 if (dvb_attach(isl6405_attach, fe,
1641 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1642 pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n",
1643 __func__);
1644 goto detach_frontend;
1645 }
1646 fe->ops.i2c_gate_ctrl(fe, 0);
1647 dev->original_set_voltage = fe->ops.set_voltage;
1648 fe->ops.set_voltage = md8800_set_voltage;
1649 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1650 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1651 }
1652 break;
1653 case SAA7134_BOARD_AVERMEDIA_M103:
1654 saa7134_set_gpio(dev, 25, 0);
1655 msleep(10);
1656 saa7134_set_gpio(dev, 25, 1);
1657 fe0->dvb.frontend = dvb_attach(mt352_attach,
1658 &avermedia_xc3028_mt352_dev,
1659 &dev->i2c_adap);
1660 attach_xc3028 = 1;
1661 break;
1662 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
1663 if (!use_frontend) { /* terrestrial */
1664 if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
1665 &tda827x_cfg_2) < 0)
1666 goto detach_frontend;
1667 } else { /* satellite */
1668 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1669 &flydvbs, &dev->i2c_adap);
1670 if (fe0->dvb.frontend) {
1671 if (dvb_attach(tda826x_attach,
1672 fe0->dvb.frontend, 0x60,
1673 &dev->i2c_adap, 0) == NULL) {
1674 pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n",
1675 __func__);
1676 goto detach_frontend;
1677 }
1678 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1679 &dev->i2c_adap, 0, 0) == NULL) {
1680 pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n",
1681 __func__);
1682 goto detach_frontend;
1683 }
1684 }
1685 }
1686 break;
1687 case SAA7134_BOARD_ASUSTeK_PS3_100:
1688 if (!use_frontend) { /* terrestrial */
1689 if (configure_tda827x_fe(dev, &asus_ps3_100_config,
1690 &tda827x_cfg_2) < 0)
1691 goto detach_frontend;
1692 } else { /* satellite */
1693 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1694 &flydvbs, &dev->i2c_adap);
1695 if (fe0->dvb.frontend) {
1696 if (dvb_attach(tda826x_attach,
1697 fe0->dvb.frontend, 0x60,
1698 &dev->i2c_adap, 0) == NULL) {
1699 pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n",
1700 __func__);
1701 goto detach_frontend;
1702 }
1703 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1704 &dev->i2c_adap, 0, 0) == NULL) {
1705 pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n",
1706 __func__);
1707 goto detach_frontend;
1708 }
1709 }
1710 }
1711 break;
1712 case SAA7134_BOARD_ASUSTeK_TIGER:
1713 if (configure_tda827x_fe(dev, &philips_tiger_config,
1714 &tda827x_cfg_0) < 0)
1715 goto detach_frontend;
1716 break;
1717 case SAA7134_BOARD_BEHOLD_H6:
1718 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1719 &behold_h6_config,
1720 &dev->i2c_adap);
1721 if (fe0->dvb.frontend) {
1722 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1723 &dev->i2c_adap, 0x61,
1724 TUNER_PHILIPS_FMD1216MEX_MK3);
1725 }
1726 break;
1727 case SAA7134_BOARD_BEHOLD_X7:
1728 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1729 &behold_x7_config,
1730 &dev->i2c_adap);
1731 if (fe0->dvb.frontend) {
1732 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1733 &dev->i2c_adap, &behold_x7_tunerconfig);
1734 }
1735 break;
1736 case SAA7134_BOARD_BEHOLD_H7:
1737 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1738 &behold_x7_config,
1739 &dev->i2c_adap);
1740 if (fe0->dvb.frontend) {
1741 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1742 &dev->i2c_adap, &behold_x7_tunerconfig);
1743 }
1744 break;
1745 case SAA7134_BOARD_AVERMEDIA_A700_PRO:
1746 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
1747 /* Zarlink ZL10313 */
1748 fe0->dvb.frontend = dvb_attach(mt312_attach,
1749 &avertv_a700_mt312, &dev->i2c_adap);
1750 if (fe0->dvb.frontend) {
1751 if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
1752 &avertv_a700_tuner, &dev->i2c_adap) == NULL) {
1753 pr_warn("%s: No zl10036 found!\n",
1754 __func__);
1755 }
1756 }
1757 break;
1758 case SAA7134_BOARD_VIDEOMATE_S350:
1759 fe0->dvb.frontend = dvb_attach(mt312_attach,
1760 &zl10313_compro_s350_config, &dev->i2c_adap);
1761 if (fe0->dvb.frontend)
1762 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1763 0x60, &dev->i2c_adap) == NULL)
1764 pr_warn("%s: No zl10039 found!\n",
1765 __func__);
1766
1767 break;
1768 case SAA7134_BOARD_VIDEOMATE_T750:
1769 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1770 &videomate_t750_zl10353_config,
1771 &dev->i2c_adap);
1772 if (fe0->dvb.frontend != NULL) {
1773 if (dvb_attach(qt1010_attach,
1774 fe0->dvb.frontend,
1775 &dev->i2c_adap,
1776 &videomate_t750_qt1010_config) == NULL)
1777 pr_warn("error attaching QT1010\n");
1778 }
1779 break;
1780 case SAA7134_BOARD_ZOLID_HYBRID_PCI:
1781 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1782 &zolid_tda10048_config,
1783 &dev->i2c_adap);
1784 if (fe0->dvb.frontend != NULL) {
1785 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1786 &dev->i2c_adap, 0x4b,
1787 &tda829x_no_probe);
1788 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1789 0x60, &dev->i2c_adap,
1790 &zolid_tda18271_config);
1791 }
1792 break;
1793 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
1794 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1795 &dtv1000s_tda10048_config,
1796 &dev->i2c_adap);
1797 if (fe0->dvb.frontend != NULL) {
1798 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1799 &dev->i2c_adap, 0x4b,
1800 &tda829x_no_probe);
1801 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1802 0x60, &dev->i2c_adap,
1803 &dtv1000s_tda18271_config);
1804 }
1805 break;
1806 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
1807 /* Switch to digital mode */
1808 saa7134_tuner_callback(dev, 0,
1809 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1810 fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
1811 &kworld_mb86a20s_config,
1812 &dev->i2c_adap);
1813 if (fe0->dvb.frontend != NULL) {
1814 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1815 &dev->i2c_adap, 0x4b,
1816 &tda829x_no_probe);
1817 fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl;
1818 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1819 0x60, &dev->i2c_adap,
1820 &kworld_tda18271_config);
1821 }
1822
1823 /* mb86a20s need to use the I2C gateway */
1824 break;
1825 case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
1826 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1827 &prohdtv_pro2_lgs8g75_config,
1828 &dev->i2c_adap);
1829 if (fe0->dvb.frontend != NULL) {
1830 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1831 &dev->i2c_adap, 0x4b,
1832 &tda829x_no_probe);
1833 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1834 0x60, &dev->i2c_adap,
1835 &prohdtv_pro2_tda18271_config);
1836 }
1837 break;
1838 case SAA7134_BOARD_AVERMEDIA_A706:
1839 /* Enable all DVB-S devices now */
1840 /* CE5039 DVB-S tuner SLEEP pin low */
1841 saa7134_set_gpio(dev, 23, 0);
1842 /* CE6313 DVB-S demod SLEEP pin low */
1843 saa7134_set_gpio(dev, 9, 0);
1844 /* CE6313 DVB-S demod RESET# pin high */
1845 saa7134_set_gpio(dev, 25, 1);
1846 msleep(1);
1847 fe0->dvb.frontend = dvb_attach(mt312_attach,
1848 &zl10313_avermedia_a706_config, &dev->i2c_adap);
1849 if (fe0->dvb.frontend) {
1850 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
1851 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1852 0x60, &dev->i2c_adap) == NULL)
1853 pr_warn("%s: No zl10039 found!\n",
1854 __func__);
1855 }
1856 break;
1857 default:
1858 pr_warn("Huh? unknown DVB card?\n");
1859 break;
1860 }
1861
1862 if (attach_xc3028) {
1863 struct dvb_frontend *fe;
1864 struct xc2028_config cfg = {
1865 .i2c_adap = &dev->i2c_adap,
1866 .i2c_addr = 0x61,
1867 };
1868
1869 if (!fe0->dvb.frontend)
1870 goto detach_frontend;
1871
1872 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
1873 if (!fe) {
1874 pr_err("%s/2: xc3028 attach failed\n",
1875 dev->name);
1876 goto detach_frontend;
1877 }
1878 }
1879
1880 if (NULL == fe0->dvb.frontend) {
1881 pr_err("%s/dvb: frontend initialization failed\n", dev->name);
1882 goto detach_frontend;
1883 }
1884 /* define general-purpose callback pointer */
1885 fe0->dvb.frontend->callback = saa7134_tuner_callback;
1886
1887 /* register everything else */
1888 #ifndef CONFIG_MEDIA_CONTROLLER_DVB
1889 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
1890 &dev->pci->dev, NULL,
1891 adapter_nr, 0);
1892 #else
1893 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
1894 &dev->pci->dev, dev->media_dev,
1895 adapter_nr, 0);
1896 #endif
1897
1898 /* this sequence is necessary to make the tda1004x load its firmware
1899 * and to enter analog mode of hybrid boards
1900 */
1901 if (!ret) {
1902 if (fe0->dvb.frontend->ops.init)
1903 fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
1904 if (fe0->dvb.frontend->ops.sleep)
1905 fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
1906 if (fe0->dvb.frontend->ops.tuner_ops.sleep)
1907 fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
1908 }
1909 return ret;
1910
1911 detach_frontend:
1912 vb2_dvb_dealloc_frontends(&dev->frontends);
1913 vb2_queue_release(&fe0->dvb.dvbq);
1914 return -EINVAL;
1915 }
1916
dvb_fini(struct saa7134_dev * dev)1917 static int dvb_fini(struct saa7134_dev *dev)
1918 {
1919 struct vb2_dvb_frontend *fe0;
1920
1921 /* Get the first frontend */
1922 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
1923 if (!fe0)
1924 return -EINVAL;
1925
1926 /* FIXME: I suspect that this code is bogus, since the entry for
1927 Pinnacle 300I DVB-T PAL already defines the proper init to allow
1928 the detection of mt2032 (TDA9887_PORT2_INACTIVE)
1929 */
1930 if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
1931 struct v4l2_priv_tun_config tda9887_cfg;
1932 static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
1933
1934 tda9887_cfg.tuner = TUNER_TDA9887;
1935 tda9887_cfg.priv = &on;
1936
1937 /* otherwise we don't detect the tuner on next insmod */
1938 saa_call_all(dev, tuner, s_config, &tda9887_cfg);
1939 } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
1940 if ((dev->eedata[2] == 0x07) && use_frontend) {
1941 /* turn off the 2nd lnb supply */
1942 u8 data = 0x80;
1943 struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
1944 struct dvb_frontend *fe;
1945 fe = fe0->dvb.frontend;
1946 if (fe->ops.i2c_gate_ctrl) {
1947 fe->ops.i2c_gate_ctrl(fe, 1);
1948 i2c_transfer(&dev->i2c_adap, &msg, 1);
1949 fe->ops.i2c_gate_ctrl(fe, 0);
1950 }
1951 }
1952 }
1953 vb2_dvb_unregister_bus(&dev->frontends);
1954 vb2_queue_release(&fe0->dvb.dvbq);
1955 return 0;
1956 }
1957
1958 static struct saa7134_mpeg_ops dvb_ops = {
1959 .type = SAA7134_MPEG_DVB,
1960 .init = dvb_init,
1961 .fini = dvb_fini,
1962 };
1963
dvb_register(void)1964 static int __init dvb_register(void)
1965 {
1966 return saa7134_ts_register(&dvb_ops);
1967 }
1968
dvb_unregister(void)1969 static void __exit dvb_unregister(void)
1970 {
1971 saa7134_ts_unregister(&dvb_ops);
1972 }
1973
1974 module_init(dvb_register);
1975 module_exit(dvb_unregister);
1976