1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // max8997.c - Regulator driver for the Maxim 8997/8966
4 //
5 // Copyright (C) 2011 Samsung Electronics
6 // MyungJoo Ham <myungjoo.ham@samsung.com>
7 //
8 // This driver is based on max8998.c
9 
10 #include <linux/bug.h>
11 #include <linux/err.h>
12 #include <linux/gpio.h>
13 #include <linux/of_gpio.h>
14 #include <linux/slab.h>
15 #include <linux/module.h>
16 #include <linux/platform_device.h>
17 #include <linux/regulator/driver.h>
18 #include <linux/regulator/machine.h>
19 #include <linux/mfd/max8997.h>
20 #include <linux/mfd/max8997-private.h>
21 #include <linux/regulator/of_regulator.h>
22 
23 struct max8997_data {
24 	struct device *dev;
25 	struct max8997_dev *iodev;
26 	int num_regulators;
27 	int ramp_delay; /* in mV/us */
28 
29 	bool buck1_gpiodvs;
30 	bool buck2_gpiodvs;
31 	bool buck5_gpiodvs;
32 	u8 buck1_vol[8];
33 	u8 buck2_vol[8];
34 	u8 buck5_vol[8];
35 	int buck125_gpios[3];
36 	int buck125_gpioindex;
37 	bool ignore_gpiodvs_side_effect;
38 
39 	u8 saved_states[MAX8997_REG_MAX];
40 };
41 
42 static const unsigned int safeoutvolt[] = {
43 	4850000,
44 	4900000,
45 	4950000,
46 	3300000,
47 };
48 
max8997_set_gpio(struct max8997_data * max8997)49 static inline void max8997_set_gpio(struct max8997_data *max8997)
50 {
51 	int set3 = (max8997->buck125_gpioindex) & 0x1;
52 	int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
53 	int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;
54 
55 	gpio_set_value(max8997->buck125_gpios[0], set1);
56 	gpio_set_value(max8997->buck125_gpios[1], set2);
57 	gpio_set_value(max8997->buck125_gpios[2], set3);
58 }
59 
60 struct voltage_map_desc {
61 	int min;
62 	int max;
63 	int step;
64 };
65 
66 /* Voltage maps in uV */
67 static const struct voltage_map_desc ldo_voltage_map_desc = {
68 	.min = 800000,	.max = 3950000,	.step = 50000,
69 }; /* LDO1 ~ 18, 21 all */
70 
71 static const struct voltage_map_desc buck1245_voltage_map_desc = {
72 	.min = 650000,	.max = 2225000,	.step = 25000,
73 }; /* Buck1, 2, 4, 5 */
74 
75 static const struct voltage_map_desc buck37_voltage_map_desc = {
76 	.min = 750000,	.max = 3900000,	.step = 50000,
77 }; /* Buck3, 7 */
78 
79 /* current map in uA */
80 static const struct voltage_map_desc charger_current_map_desc = {
81 	.min = 200000,	.max = 950000,	.step = 50000,
82 };
83 
84 static const struct voltage_map_desc topoff_current_map_desc = {
85 	.min = 50000,	.max = 200000,	.step = 10000,
86 };
87 
88 static const struct voltage_map_desc *reg_voltage_map[] = {
89 	[MAX8997_LDO1] = &ldo_voltage_map_desc,
90 	[MAX8997_LDO2] = &ldo_voltage_map_desc,
91 	[MAX8997_LDO3] = &ldo_voltage_map_desc,
92 	[MAX8997_LDO4] = &ldo_voltage_map_desc,
93 	[MAX8997_LDO5] = &ldo_voltage_map_desc,
94 	[MAX8997_LDO6] = &ldo_voltage_map_desc,
95 	[MAX8997_LDO7] = &ldo_voltage_map_desc,
96 	[MAX8997_LDO8] = &ldo_voltage_map_desc,
97 	[MAX8997_LDO9] = &ldo_voltage_map_desc,
98 	[MAX8997_LDO10] = &ldo_voltage_map_desc,
99 	[MAX8997_LDO11] = &ldo_voltage_map_desc,
100 	[MAX8997_LDO12] = &ldo_voltage_map_desc,
101 	[MAX8997_LDO13] = &ldo_voltage_map_desc,
102 	[MAX8997_LDO14] = &ldo_voltage_map_desc,
103 	[MAX8997_LDO15] = &ldo_voltage_map_desc,
104 	[MAX8997_LDO16] = &ldo_voltage_map_desc,
105 	[MAX8997_LDO17] = &ldo_voltage_map_desc,
106 	[MAX8997_LDO18] = &ldo_voltage_map_desc,
107 	[MAX8997_LDO21] = &ldo_voltage_map_desc,
108 	[MAX8997_BUCK1] = &buck1245_voltage_map_desc,
109 	[MAX8997_BUCK2] = &buck1245_voltage_map_desc,
110 	[MAX8997_BUCK3] = &buck37_voltage_map_desc,
111 	[MAX8997_BUCK4] = &buck1245_voltage_map_desc,
112 	[MAX8997_BUCK5] = &buck1245_voltage_map_desc,
113 	[MAX8997_BUCK6] = NULL,
114 	[MAX8997_BUCK7] = &buck37_voltage_map_desc,
115 	[MAX8997_EN32KHZ_AP] = NULL,
116 	[MAX8997_EN32KHZ_CP] = NULL,
117 	[MAX8997_ENVICHG] = NULL,
118 	[MAX8997_ESAFEOUT1] = NULL,
119 	[MAX8997_ESAFEOUT2] = NULL,
120 	[MAX8997_CHARGER_CV] = NULL,
121 	[MAX8997_CHARGER] = &charger_current_map_desc,
122 	[MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
123 };
124 
max8997_list_voltage_charger_cv(struct regulator_dev * rdev,unsigned int selector)125 static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
126 		unsigned int selector)
127 {
128 	int rid = rdev_get_id(rdev);
129 
130 	if (rid != MAX8997_CHARGER_CV)
131 		goto err;
132 
133 	switch (selector) {
134 	case 0x00:
135 		return 4200000;
136 	case 0x01 ... 0x0E:
137 		return 4000000 + 20000 * (selector - 0x01);
138 	case 0x0F:
139 		return 4350000;
140 	default:
141 		return -EINVAL;
142 	}
143 err:
144 	return -EINVAL;
145 }
146 
max8997_list_voltage(struct regulator_dev * rdev,unsigned int selector)147 static int max8997_list_voltage(struct regulator_dev *rdev,
148 		unsigned int selector)
149 {
150 	const struct voltage_map_desc *desc;
151 	int rid = rdev_get_id(rdev);
152 	int val;
153 
154 	if (rid < 0 || rid >= ARRAY_SIZE(reg_voltage_map))
155 		return -EINVAL;
156 
157 	desc = reg_voltage_map[rid];
158 	if (desc == NULL)
159 		return -EINVAL;
160 
161 	val = desc->min + desc->step * selector;
162 	if (val > desc->max)
163 		return -EINVAL;
164 
165 	return val;
166 }
167 
max8997_get_enable_register(struct regulator_dev * rdev,int * reg,int * mask,int * pattern)168 static int max8997_get_enable_register(struct regulator_dev *rdev,
169 		int *reg, int *mask, int *pattern)
170 {
171 	int rid = rdev_get_id(rdev);
172 
173 	switch (rid) {
174 	case MAX8997_LDO1 ... MAX8997_LDO21:
175 		*reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
176 		*mask = 0xC0;
177 		*pattern = 0xC0;
178 		break;
179 	case MAX8997_BUCK1:
180 		*reg = MAX8997_REG_BUCK1CTRL;
181 		*mask = 0x01;
182 		*pattern = 0x01;
183 		break;
184 	case MAX8997_BUCK2:
185 		*reg = MAX8997_REG_BUCK2CTRL;
186 		*mask = 0x01;
187 		*pattern = 0x01;
188 		break;
189 	case MAX8997_BUCK3:
190 		*reg = MAX8997_REG_BUCK3CTRL;
191 		*mask = 0x01;
192 		*pattern = 0x01;
193 		break;
194 	case MAX8997_BUCK4:
195 		*reg = MAX8997_REG_BUCK4CTRL;
196 		*mask = 0x01;
197 		*pattern = 0x01;
198 		break;
199 	case MAX8997_BUCK5:
200 		*reg = MAX8997_REG_BUCK5CTRL;
201 		*mask = 0x01;
202 		*pattern = 0x01;
203 		break;
204 	case MAX8997_BUCK6:
205 		*reg = MAX8997_REG_BUCK6CTRL;
206 		*mask = 0x01;
207 		*pattern = 0x01;
208 		break;
209 	case MAX8997_BUCK7:
210 		*reg = MAX8997_REG_BUCK7CTRL;
211 		*mask = 0x01;
212 		*pattern = 0x01;
213 		break;
214 	case MAX8997_EN32KHZ_AP ... MAX8997_EN32KHZ_CP:
215 		*reg = MAX8997_REG_MAINCON1;
216 		*mask = 0x01 << (rid - MAX8997_EN32KHZ_AP);
217 		*pattern = 0x01 << (rid - MAX8997_EN32KHZ_AP);
218 		break;
219 	case MAX8997_ENVICHG:
220 		*reg = MAX8997_REG_MBCCTRL1;
221 		*mask = 0x80;
222 		*pattern = 0x80;
223 		break;
224 	case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2:
225 		*reg = MAX8997_REG_SAFEOUTCTRL;
226 		*mask = 0x40 << (rid - MAX8997_ESAFEOUT1);
227 		*pattern = 0x40 << (rid - MAX8997_ESAFEOUT1);
228 		break;
229 	case MAX8997_CHARGER:
230 		*reg = MAX8997_REG_MBCCTRL2;
231 		*mask = 0x40;
232 		*pattern = 0x40;
233 		break;
234 	default:
235 		/* Not controllable or not exists */
236 		return -EINVAL;
237 	}
238 
239 	return 0;
240 }
241 
max8997_reg_is_enabled(struct regulator_dev * rdev)242 static int max8997_reg_is_enabled(struct regulator_dev *rdev)
243 {
244 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
245 	struct i2c_client *i2c = max8997->iodev->i2c;
246 	int ret, reg, mask, pattern;
247 	u8 val;
248 
249 	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
250 	if (ret)
251 		return ret;
252 
253 	ret = max8997_read_reg(i2c, reg, &val);
254 	if (ret)
255 		return ret;
256 
257 	return (val & mask) == pattern;
258 }
259 
max8997_reg_enable(struct regulator_dev * rdev)260 static int max8997_reg_enable(struct regulator_dev *rdev)
261 {
262 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
263 	struct i2c_client *i2c = max8997->iodev->i2c;
264 	int ret, reg, mask, pattern;
265 
266 	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
267 	if (ret)
268 		return ret;
269 
270 	return max8997_update_reg(i2c, reg, pattern, mask);
271 }
272 
max8997_reg_disable(struct regulator_dev * rdev)273 static int max8997_reg_disable(struct regulator_dev *rdev)
274 {
275 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
276 	struct i2c_client *i2c = max8997->iodev->i2c;
277 	int ret, reg, mask, pattern;
278 
279 	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
280 	if (ret)
281 		return ret;
282 
283 	return max8997_update_reg(i2c, reg, ~pattern, mask);
284 }
285 
max8997_get_voltage_register(struct regulator_dev * rdev,int * _reg,int * _shift,int * _mask)286 static int max8997_get_voltage_register(struct regulator_dev *rdev,
287 		int *_reg, int *_shift, int *_mask)
288 {
289 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
290 	int rid = rdev_get_id(rdev);
291 	int reg, shift = 0, mask = 0x3f;
292 
293 	switch (rid) {
294 	case MAX8997_LDO1 ... MAX8997_LDO21:
295 		reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
296 		break;
297 	case MAX8997_BUCK1:
298 		reg = MAX8997_REG_BUCK1DVS1;
299 		if (max8997->buck1_gpiodvs)
300 			reg += max8997->buck125_gpioindex;
301 		break;
302 	case MAX8997_BUCK2:
303 		reg = MAX8997_REG_BUCK2DVS1;
304 		if (max8997->buck2_gpiodvs)
305 			reg += max8997->buck125_gpioindex;
306 		break;
307 	case MAX8997_BUCK3:
308 		reg = MAX8997_REG_BUCK3DVS;
309 		break;
310 	case MAX8997_BUCK4:
311 		reg = MAX8997_REG_BUCK4DVS;
312 		break;
313 	case MAX8997_BUCK5:
314 		reg = MAX8997_REG_BUCK5DVS1;
315 		if (max8997->buck5_gpiodvs)
316 			reg += max8997->buck125_gpioindex;
317 		break;
318 	case MAX8997_BUCK7:
319 		reg = MAX8997_REG_BUCK7DVS;
320 		break;
321 	case MAX8997_ESAFEOUT1 ...  MAX8997_ESAFEOUT2:
322 		reg = MAX8997_REG_SAFEOUTCTRL;
323 		shift = (rid == MAX8997_ESAFEOUT2) ? 2 : 0;
324 		mask = 0x3;
325 		break;
326 	case MAX8997_CHARGER_CV:
327 		reg = MAX8997_REG_MBCCTRL3;
328 		shift = 0;
329 		mask = 0xf;
330 		break;
331 	case MAX8997_CHARGER:
332 		reg = MAX8997_REG_MBCCTRL4;
333 		shift = 0;
334 		mask = 0xf;
335 		break;
336 	case MAX8997_CHARGER_TOPOFF:
337 		reg = MAX8997_REG_MBCCTRL5;
338 		shift = 0;
339 		mask = 0xf;
340 		break;
341 	default:
342 		return -EINVAL;
343 	}
344 
345 	*_reg = reg;
346 	*_shift = shift;
347 	*_mask = mask;
348 
349 	return 0;
350 }
351 
max8997_get_voltage_sel(struct regulator_dev * rdev)352 static int max8997_get_voltage_sel(struct regulator_dev *rdev)
353 {
354 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
355 	struct i2c_client *i2c = max8997->iodev->i2c;
356 	int reg, shift, mask, ret;
357 	u8 val;
358 
359 	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
360 	if (ret)
361 		return ret;
362 
363 	ret = max8997_read_reg(i2c, reg, &val);
364 	if (ret)
365 		return ret;
366 
367 	val >>= shift;
368 	val &= mask;
369 
370 	return val;
371 }
372 
max8997_get_voltage_proper_val(const struct voltage_map_desc * desc,int min_vol,int max_vol)373 static inline int max8997_get_voltage_proper_val(
374 		const struct voltage_map_desc *desc,
375 		int min_vol, int max_vol)
376 {
377 	int i;
378 
379 	if (desc == NULL)
380 		return -EINVAL;
381 
382 	if (max_vol < desc->min || min_vol > desc->max)
383 		return -EINVAL;
384 
385 	if (min_vol < desc->min)
386 		min_vol = desc->min;
387 
388 	i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
389 
390 	if (desc->min + desc->step * i > max_vol)
391 		return -EINVAL;
392 
393 	return i;
394 }
395 
max8997_set_voltage_charger_cv(struct regulator_dev * rdev,int min_uV,int max_uV,unsigned * selector)396 static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
397 		int min_uV, int max_uV, unsigned *selector)
398 {
399 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
400 	struct i2c_client *i2c = max8997->iodev->i2c;
401 	int rid = rdev_get_id(rdev);
402 	int lb, ub;
403 	int reg, shift = 0, mask, ret = 0;
404 	u8 val = 0x0;
405 
406 	if (rid != MAX8997_CHARGER_CV)
407 		return -EINVAL;
408 
409 	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
410 	if (ret)
411 		return ret;
412 
413 	if (max_uV < 4000000 || min_uV > 4350000)
414 		return -EINVAL;
415 
416 	if (min_uV <= 4000000)
417 		val = 0x1;
418 	else if (min_uV <= 4200000 && max_uV >= 4200000)
419 		val = 0x0;
420 	else {
421 		lb = (min_uV - 4000001) / 20000 + 2;
422 		ub = (max_uV - 4000000) / 20000 + 1;
423 
424 		if (lb > ub)
425 			return -EINVAL;
426 
427 		if (lb < 0xf)
428 			val = lb;
429 		else {
430 			if (ub >= 0xf)
431 				val = 0xf;
432 			else
433 				return -EINVAL;
434 		}
435 	}
436 
437 	*selector = val;
438 
439 	ret = max8997_update_reg(i2c, reg, val << shift, mask);
440 
441 	return ret;
442 }
443 
444 /*
445  * For LDO1 ~ LDO21, BUCK1~5, BUCK7, CHARGER, CHARGER_TOPOFF
446  * BUCK1, 2, and 5 are available if they are not controlled by gpio
447  */
max8997_set_voltage_ldobuck(struct regulator_dev * rdev,int min_uV,int max_uV,unsigned * selector)448 static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
449 		int min_uV, int max_uV, unsigned *selector)
450 {
451 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
452 	struct i2c_client *i2c = max8997->iodev->i2c;
453 	const struct voltage_map_desc *desc;
454 	int rid = rdev_get_id(rdev);
455 	int i, reg, shift, mask, ret;
456 
457 	switch (rid) {
458 	case MAX8997_LDO1 ... MAX8997_LDO21:
459 		break;
460 	case MAX8997_BUCK1 ... MAX8997_BUCK5:
461 		break;
462 	case MAX8997_BUCK6:
463 		return -EINVAL;
464 	case MAX8997_BUCK7:
465 		break;
466 	case MAX8997_CHARGER:
467 		break;
468 	case MAX8997_CHARGER_TOPOFF:
469 		break;
470 	default:
471 		return -EINVAL;
472 	}
473 
474 	desc = reg_voltage_map[rid];
475 
476 	i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
477 	if (i < 0)
478 		return i;
479 
480 	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
481 	if (ret)
482 		return ret;
483 
484 	ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
485 	*selector = i;
486 
487 	return ret;
488 }
489 
max8997_set_voltage_buck_time_sel(struct regulator_dev * rdev,unsigned int old_selector,unsigned int new_selector)490 static int max8997_set_voltage_buck_time_sel(struct regulator_dev *rdev,
491 						unsigned int old_selector,
492 						unsigned int new_selector)
493 {
494 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
495 	int rid = rdev_get_id(rdev);
496 	const struct voltage_map_desc *desc = reg_voltage_map[rid];
497 
498 	/* Delay is required only if the voltage is increasing */
499 	if (old_selector >= new_selector)
500 		return 0;
501 
502 	/* No need to delay if gpio_dvs_mode */
503 	switch (rid) {
504 	case MAX8997_BUCK1:
505 		if (max8997->buck1_gpiodvs)
506 			return 0;
507 		break;
508 	case MAX8997_BUCK2:
509 		if (max8997->buck2_gpiodvs)
510 			return 0;
511 		break;
512 	case MAX8997_BUCK5:
513 		if (max8997->buck5_gpiodvs)
514 			return 0;
515 		break;
516 	}
517 
518 	switch (rid) {
519 	case MAX8997_BUCK1:
520 	case MAX8997_BUCK2:
521 	case MAX8997_BUCK4:
522 	case MAX8997_BUCK5:
523 		return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
524 				    max8997->ramp_delay * 1000);
525 	}
526 
527 	return 0;
528 }
529 
530 /*
531  * Assess the damage on the voltage setting of BUCK1,2,5 by the change.
532  *
533  * When GPIO-DVS mode is used for multiple bucks, changing the voltage value
534  * of one of the bucks may affect that of another buck, which is the side
535  * effect of the change (set_voltage). This function examines the GPIO-DVS
536  * configurations and checks whether such side-effect exists.
537  */
max8997_assess_side_effect(struct regulator_dev * rdev,u8 new_val,int * best)538 static int max8997_assess_side_effect(struct regulator_dev *rdev,
539 		u8 new_val, int *best)
540 {
541 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
542 	int rid = rdev_get_id(rdev);
543 	u8 *buckx_val[3];
544 	bool buckx_gpiodvs[3];
545 	int side_effect[8];
546 	int min_side_effect = INT_MAX;
547 	int i;
548 
549 	*best = -1;
550 
551 	switch (rid) {
552 	case MAX8997_BUCK1:
553 		rid = 0;
554 		break;
555 	case MAX8997_BUCK2:
556 		rid = 1;
557 		break;
558 	case MAX8997_BUCK5:
559 		rid = 2;
560 		break;
561 	default:
562 		return -EINVAL;
563 	}
564 
565 	buckx_val[0] = max8997->buck1_vol;
566 	buckx_val[1] = max8997->buck2_vol;
567 	buckx_val[2] = max8997->buck5_vol;
568 	buckx_gpiodvs[0] = max8997->buck1_gpiodvs;
569 	buckx_gpiodvs[1] = max8997->buck2_gpiodvs;
570 	buckx_gpiodvs[2] = max8997->buck5_gpiodvs;
571 
572 	for (i = 0; i < 8; i++) {
573 		int others;
574 
575 		if (new_val != (buckx_val[rid])[i]) {
576 			side_effect[i] = -1;
577 			continue;
578 		}
579 
580 		side_effect[i] = 0;
581 		for (others = 0; others < 3; others++) {
582 			int diff;
583 
584 			if (others == rid)
585 				continue;
586 			if (buckx_gpiodvs[others] == false)
587 				continue; /* Not affected */
588 			diff = (buckx_val[others])[i] -
589 				(buckx_val[others])[max8997->buck125_gpioindex];
590 			if (diff > 0)
591 				side_effect[i] += diff;
592 			else if (diff < 0)
593 				side_effect[i] -= diff;
594 		}
595 		if (side_effect[i] == 0) {
596 			*best = i;
597 			return 0; /* NO SIDE EFFECT! Use This! */
598 		}
599 		if (side_effect[i] < min_side_effect) {
600 			min_side_effect = side_effect[i];
601 			*best = i;
602 		}
603 	}
604 
605 	if (*best == -1)
606 		return -EINVAL;
607 
608 	return side_effect[*best];
609 }
610 
611 /*
612  * For Buck 1 ~ 5 and 7. If it is not controlled by GPIO, this calls
613  * max8997_set_voltage_ldobuck to do the job.
614  */
max8997_set_voltage_buck(struct regulator_dev * rdev,int min_uV,int max_uV,unsigned * selector)615 static int max8997_set_voltage_buck(struct regulator_dev *rdev,
616 		int min_uV, int max_uV, unsigned *selector)
617 {
618 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
619 	int rid = rdev_get_id(rdev);
620 	const struct voltage_map_desc *desc;
621 	int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
622 	bool gpio_dvs_mode = false;
623 
624 	if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
625 		return -EINVAL;
626 
627 	switch (rid) {
628 	case MAX8997_BUCK1:
629 		if (max8997->buck1_gpiodvs)
630 			gpio_dvs_mode = true;
631 		break;
632 	case MAX8997_BUCK2:
633 		if (max8997->buck2_gpiodvs)
634 			gpio_dvs_mode = true;
635 		break;
636 	case MAX8997_BUCK5:
637 		if (max8997->buck5_gpiodvs)
638 			gpio_dvs_mode = true;
639 		break;
640 	}
641 
642 	if (!gpio_dvs_mode)
643 		return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV,
644 						selector);
645 
646 	desc = reg_voltage_map[rid];
647 	new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
648 	if (new_val < 0)
649 		return new_val;
650 
651 	tmp_dmg = INT_MAX;
652 	tmp_idx = -1;
653 	tmp_val = -1;
654 	do {
655 		damage = max8997_assess_side_effect(rdev, new_val, &new_idx);
656 		if (damage == 0)
657 			goto out;
658 
659 		if (tmp_dmg > damage) {
660 			tmp_idx = new_idx;
661 			tmp_val = new_val;
662 			tmp_dmg = damage;
663 		}
664 
665 		new_val++;
666 	} while (desc->min + desc->step * new_val <= desc->max);
667 
668 	new_idx = tmp_idx;
669 	new_val = tmp_val;
670 
671 	if (max8997->ignore_gpiodvs_side_effect == false)
672 		return -EINVAL;
673 
674 	dev_warn(&rdev->dev,
675 		"MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:  %d -> %d\n",
676 		max8997->buck125_gpioindex, tmp_idx);
677 
678 out:
679 	if (new_idx < 0 || new_val < 0)
680 		return -EINVAL;
681 
682 	max8997->buck125_gpioindex = new_idx;
683 	max8997_set_gpio(max8997);
684 	*selector = new_val;
685 
686 	return 0;
687 }
688 
689 /* For SAFEOUT1 and SAFEOUT2 */
max8997_set_voltage_safeout_sel(struct regulator_dev * rdev,unsigned selector)690 static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
691 					   unsigned selector)
692 {
693 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
694 	struct i2c_client *i2c = max8997->iodev->i2c;
695 	int rid = rdev_get_id(rdev);
696 	int reg, shift = 0, mask, ret;
697 
698 	if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2)
699 		return -EINVAL;
700 
701 	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
702 	if (ret)
703 		return ret;
704 
705 	return max8997_update_reg(i2c, reg, selector << shift, mask << shift);
706 }
707 
max8997_reg_disable_suspend(struct regulator_dev * rdev)708 static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
709 {
710 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
711 	struct i2c_client *i2c = max8997->iodev->i2c;
712 	int ret, reg, mask, pattern;
713 	int rid = rdev_get_id(rdev);
714 
715 	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
716 	if (ret)
717 		return ret;
718 
719 	max8997_read_reg(i2c, reg, &max8997->saved_states[rid]);
720 
721 	if (rid == MAX8997_LDO1 ||
722 			rid == MAX8997_LDO10 ||
723 			rid == MAX8997_LDO21) {
724 		dev_dbg(&rdev->dev, "Conditional Power-Off for %s\n",
725 				rdev->desc->name);
726 		return max8997_update_reg(i2c, reg, 0x40, mask);
727 	}
728 
729 	dev_dbg(&rdev->dev, "Full Power-Off for %s (%xh -> %xh)\n",
730 			rdev->desc->name, max8997->saved_states[rid] & mask,
731 			(~pattern) & mask);
732 	return max8997_update_reg(i2c, reg, ~pattern, mask);
733 }
734 
735 static const struct regulator_ops max8997_ldo_ops = {
736 	.list_voltage		= max8997_list_voltage,
737 	.is_enabled		= max8997_reg_is_enabled,
738 	.enable			= max8997_reg_enable,
739 	.disable		= max8997_reg_disable,
740 	.get_voltage_sel	= max8997_get_voltage_sel,
741 	.set_voltage		= max8997_set_voltage_ldobuck,
742 	.set_suspend_disable	= max8997_reg_disable_suspend,
743 };
744 
745 static const struct regulator_ops max8997_buck_ops = {
746 	.list_voltage		= max8997_list_voltage,
747 	.is_enabled		= max8997_reg_is_enabled,
748 	.enable			= max8997_reg_enable,
749 	.disable		= max8997_reg_disable,
750 	.get_voltage_sel	= max8997_get_voltage_sel,
751 	.set_voltage		= max8997_set_voltage_buck,
752 	.set_voltage_time_sel	= max8997_set_voltage_buck_time_sel,
753 	.set_suspend_disable	= max8997_reg_disable_suspend,
754 };
755 
756 static const struct regulator_ops max8997_fixedvolt_ops = {
757 	.list_voltage		= max8997_list_voltage,
758 	.is_enabled		= max8997_reg_is_enabled,
759 	.enable			= max8997_reg_enable,
760 	.disable		= max8997_reg_disable,
761 	.set_suspend_disable	= max8997_reg_disable_suspend,
762 };
763 
764 static const struct regulator_ops max8997_safeout_ops = {
765 	.list_voltage		= regulator_list_voltage_table,
766 	.is_enabled		= max8997_reg_is_enabled,
767 	.enable			= max8997_reg_enable,
768 	.disable		= max8997_reg_disable,
769 	.get_voltage_sel	= max8997_get_voltage_sel,
770 	.set_voltage_sel	= max8997_set_voltage_safeout_sel,
771 	.set_suspend_disable	= max8997_reg_disable_suspend,
772 };
773 
774 static const struct regulator_ops max8997_fixedstate_ops = {
775 	.list_voltage		= max8997_list_voltage_charger_cv,
776 	.get_voltage_sel	= max8997_get_voltage_sel,
777 	.set_voltage		= max8997_set_voltage_charger_cv,
778 };
779 
max8997_set_current_limit(struct regulator_dev * rdev,int min_uA,int max_uA)780 static int max8997_set_current_limit(struct regulator_dev *rdev,
781 				     int min_uA, int max_uA)
782 {
783 	unsigned dummy;
784 	int rid = rdev_get_id(rdev);
785 
786 	if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
787 		return -EINVAL;
788 
789 	/* Reuse max8997_set_voltage_ldobuck to set current_limit. */
790 	return max8997_set_voltage_ldobuck(rdev, min_uA, max_uA, &dummy);
791 }
792 
max8997_get_current_limit(struct regulator_dev * rdev)793 static int max8997_get_current_limit(struct regulator_dev *rdev)
794 {
795 	int sel, rid = rdev_get_id(rdev);
796 
797 	if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
798 		return -EINVAL;
799 
800 	sel = max8997_get_voltage_sel(rdev);
801 	if (sel < 0)
802 		return sel;
803 
804 	/* Reuse max8997_list_voltage to get current_limit. */
805 	return max8997_list_voltage(rdev, sel);
806 }
807 
808 static const struct regulator_ops max8997_charger_ops = {
809 	.is_enabled		= max8997_reg_is_enabled,
810 	.enable			= max8997_reg_enable,
811 	.disable		= max8997_reg_disable,
812 	.get_current_limit	= max8997_get_current_limit,
813 	.set_current_limit	= max8997_set_current_limit,
814 };
815 
816 static const struct regulator_ops max8997_charger_fixedstate_ops = {
817 	.get_current_limit	= max8997_get_current_limit,
818 	.set_current_limit	= max8997_set_current_limit,
819 };
820 
821 #define MAX8997_VOLTAGE_REGULATOR(_name, _ops) {\
822 	.name		= #_name,		\
823 	.id		= MAX8997_##_name,	\
824 	.ops		= &_ops,		\
825 	.type		= REGULATOR_VOLTAGE,	\
826 	.owner		= THIS_MODULE,		\
827 }
828 
829 #define MAX8997_CURRENT_REGULATOR(_name, _ops) {\
830 	.name		= #_name,		\
831 	.id		= MAX8997_##_name,	\
832 	.ops		= &_ops,		\
833 	.type		= REGULATOR_CURRENT,	\
834 	.owner		= THIS_MODULE,		\
835 }
836 
837 static struct regulator_desc regulators[] = {
838 	MAX8997_VOLTAGE_REGULATOR(LDO1, max8997_ldo_ops),
839 	MAX8997_VOLTAGE_REGULATOR(LDO2, max8997_ldo_ops),
840 	MAX8997_VOLTAGE_REGULATOR(LDO3, max8997_ldo_ops),
841 	MAX8997_VOLTAGE_REGULATOR(LDO4, max8997_ldo_ops),
842 	MAX8997_VOLTAGE_REGULATOR(LDO5, max8997_ldo_ops),
843 	MAX8997_VOLTAGE_REGULATOR(LDO6, max8997_ldo_ops),
844 	MAX8997_VOLTAGE_REGULATOR(LDO7, max8997_ldo_ops),
845 	MAX8997_VOLTAGE_REGULATOR(LDO8, max8997_ldo_ops),
846 	MAX8997_VOLTAGE_REGULATOR(LDO9, max8997_ldo_ops),
847 	MAX8997_VOLTAGE_REGULATOR(LDO10, max8997_ldo_ops),
848 	MAX8997_VOLTAGE_REGULATOR(LDO11, max8997_ldo_ops),
849 	MAX8997_VOLTAGE_REGULATOR(LDO12, max8997_ldo_ops),
850 	MAX8997_VOLTAGE_REGULATOR(LDO13, max8997_ldo_ops),
851 	MAX8997_VOLTAGE_REGULATOR(LDO14, max8997_ldo_ops),
852 	MAX8997_VOLTAGE_REGULATOR(LDO15, max8997_ldo_ops),
853 	MAX8997_VOLTAGE_REGULATOR(LDO16, max8997_ldo_ops),
854 	MAX8997_VOLTAGE_REGULATOR(LDO17, max8997_ldo_ops),
855 	MAX8997_VOLTAGE_REGULATOR(LDO18, max8997_ldo_ops),
856 	MAX8997_VOLTAGE_REGULATOR(LDO21, max8997_ldo_ops),
857 	MAX8997_VOLTAGE_REGULATOR(BUCK1, max8997_buck_ops),
858 	MAX8997_VOLTAGE_REGULATOR(BUCK2, max8997_buck_ops),
859 	MAX8997_VOLTAGE_REGULATOR(BUCK3, max8997_buck_ops),
860 	MAX8997_VOLTAGE_REGULATOR(BUCK4, max8997_buck_ops),
861 	MAX8997_VOLTAGE_REGULATOR(BUCK5, max8997_buck_ops),
862 	MAX8997_VOLTAGE_REGULATOR(BUCK6, max8997_fixedvolt_ops),
863 	MAX8997_VOLTAGE_REGULATOR(BUCK7, max8997_buck_ops),
864 	MAX8997_VOLTAGE_REGULATOR(EN32KHZ_AP, max8997_fixedvolt_ops),
865 	MAX8997_VOLTAGE_REGULATOR(EN32KHZ_CP, max8997_fixedvolt_ops),
866 	MAX8997_VOLTAGE_REGULATOR(ENVICHG, max8997_fixedvolt_ops),
867 	MAX8997_VOLTAGE_REGULATOR(ESAFEOUT1, max8997_safeout_ops),
868 	MAX8997_VOLTAGE_REGULATOR(ESAFEOUT2, max8997_safeout_ops),
869 	MAX8997_VOLTAGE_REGULATOR(CHARGER_CV, max8997_fixedstate_ops),
870 	MAX8997_CURRENT_REGULATOR(CHARGER, max8997_charger_ops),
871 	MAX8997_CURRENT_REGULATOR(CHARGER_TOPOFF,
872 				  max8997_charger_fixedstate_ops),
873 };
874 
875 #ifdef CONFIG_OF
max8997_pmic_dt_parse_dvs_gpio(struct platform_device * pdev,struct max8997_platform_data * pdata,struct device_node * pmic_np)876 static int max8997_pmic_dt_parse_dvs_gpio(struct platform_device *pdev,
877 			struct max8997_platform_data *pdata,
878 			struct device_node *pmic_np)
879 {
880 	int i, gpio;
881 
882 	for (i = 0; i < 3; i++) {
883 		gpio = of_get_named_gpio(pmic_np,
884 					"max8997,pmic-buck125-dvs-gpios", i);
885 		if (!gpio_is_valid(gpio)) {
886 			dev_err(&pdev->dev, "invalid gpio[%d]: %d\n", i, gpio);
887 			return -EINVAL;
888 		}
889 		pdata->buck125_gpios[i] = gpio;
890 	}
891 	return 0;
892 }
893 
max8997_pmic_dt_parse_pdata(struct platform_device * pdev,struct max8997_platform_data * pdata)894 static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
895 					struct max8997_platform_data *pdata)
896 {
897 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
898 	struct device_node *pmic_np, *regulators_np, *reg_np;
899 	struct max8997_regulator_data *rdata;
900 	unsigned int i, dvs_voltage_nr = 1, ret;
901 
902 	pmic_np = iodev->dev->of_node;
903 	if (!pmic_np) {
904 		dev_err(&pdev->dev, "could not find pmic sub-node\n");
905 		return -ENODEV;
906 	}
907 
908 	regulators_np = of_get_child_by_name(pmic_np, "regulators");
909 	if (!regulators_np) {
910 		dev_err(&pdev->dev, "could not find regulators sub-node\n");
911 		return -EINVAL;
912 	}
913 
914 	/* count the number of regulators to be supported in pmic */
915 	pdata->num_regulators = of_get_child_count(regulators_np);
916 
917 	rdata = devm_kcalloc(&pdev->dev,
918 			     pdata->num_regulators, sizeof(*rdata),
919 			     GFP_KERNEL);
920 	if (!rdata) {
921 		of_node_put(regulators_np);
922 		return -ENOMEM;
923 	}
924 
925 	pdata->regulators = rdata;
926 	for_each_child_of_node(regulators_np, reg_np) {
927 		for (i = 0; i < ARRAY_SIZE(regulators); i++)
928 			if (of_node_name_eq(reg_np, regulators[i].name))
929 				break;
930 
931 		if (i == ARRAY_SIZE(regulators)) {
932 			dev_warn(&pdev->dev, "don't know how to configure regulator %pOFn\n",
933 				 reg_np);
934 			continue;
935 		}
936 
937 		rdata->id = i;
938 		rdata->initdata = of_get_regulator_init_data(&pdev->dev,
939 							     reg_np,
940 							     &regulators[i]);
941 		rdata->reg_node = reg_np;
942 		rdata++;
943 	}
944 	of_node_put(regulators_np);
945 
946 	if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
947 		pdata->buck1_gpiodvs = true;
948 
949 	if (of_get_property(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs", NULL))
950 		pdata->buck2_gpiodvs = true;
951 
952 	if (of_get_property(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs", NULL))
953 		pdata->buck5_gpiodvs = true;
954 
955 	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
956 						pdata->buck5_gpiodvs) {
957 		ret = max8997_pmic_dt_parse_dvs_gpio(pdev, pdata, pmic_np);
958 		if (ret)
959 			return -EINVAL;
960 
961 		if (of_property_read_u32(pmic_np,
962 				"max8997,pmic-buck125-default-dvs-idx",
963 				&pdata->buck125_default_idx)) {
964 			pdata->buck125_default_idx = 0;
965 		} else {
966 			if (pdata->buck125_default_idx >= 8) {
967 				pdata->buck125_default_idx = 0;
968 				dev_info(&pdev->dev, "invalid value for default dvs index, using 0 instead\n");
969 			}
970 		}
971 
972 		if (of_get_property(pmic_np,
973 			"max8997,pmic-ignore-gpiodvs-side-effect", NULL))
974 			pdata->ignore_gpiodvs_side_effect = true;
975 
976 		dvs_voltage_nr = 8;
977 	}
978 
979 	if (of_property_read_u32_array(pmic_np,
980 				"max8997,pmic-buck1-dvs-voltage",
981 				pdata->buck1_voltage, dvs_voltage_nr)) {
982 		dev_err(&pdev->dev, "buck1 voltages not specified\n");
983 		return -EINVAL;
984 	}
985 
986 	if (of_property_read_u32_array(pmic_np,
987 				"max8997,pmic-buck2-dvs-voltage",
988 				pdata->buck2_voltage, dvs_voltage_nr)) {
989 		dev_err(&pdev->dev, "buck2 voltages not specified\n");
990 		return -EINVAL;
991 	}
992 
993 	if (of_property_read_u32_array(pmic_np,
994 				"max8997,pmic-buck5-dvs-voltage",
995 				pdata->buck5_voltage, dvs_voltage_nr)) {
996 		dev_err(&pdev->dev, "buck5 voltages not specified\n");
997 		return -EINVAL;
998 	}
999 
1000 	return 0;
1001 }
1002 #else
max8997_pmic_dt_parse_pdata(struct platform_device * pdev,struct max8997_platform_data * pdata)1003 static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
1004 					struct max8997_platform_data *pdata)
1005 {
1006 	return 0;
1007 }
1008 #endif /* CONFIG_OF */
1009 
max8997_pmic_probe(struct platform_device * pdev)1010 static int max8997_pmic_probe(struct platform_device *pdev)
1011 {
1012 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
1013 	struct max8997_platform_data *pdata = iodev->pdata;
1014 	struct regulator_config config = { };
1015 	struct regulator_dev *rdev;
1016 	struct max8997_data *max8997;
1017 	struct i2c_client *i2c;
1018 	int i, ret, nr_dvs;
1019 	u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
1020 
1021 	if (!pdata) {
1022 		dev_err(&pdev->dev, "No platform init data supplied.\n");
1023 		return -ENODEV;
1024 	}
1025 
1026 	if (iodev->dev->of_node) {
1027 		ret = max8997_pmic_dt_parse_pdata(pdev, pdata);
1028 		if (ret)
1029 			return ret;
1030 	}
1031 
1032 	max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
1033 			       GFP_KERNEL);
1034 	if (!max8997)
1035 		return -ENOMEM;
1036 
1037 	max8997->dev = &pdev->dev;
1038 	max8997->iodev = iodev;
1039 	max8997->num_regulators = pdata->num_regulators;
1040 	platform_set_drvdata(pdev, max8997);
1041 	i2c = max8997->iodev->i2c;
1042 
1043 	max8997->buck125_gpioindex = pdata->buck125_default_idx;
1044 	max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
1045 	max8997->buck2_gpiodvs = pdata->buck2_gpiodvs;
1046 	max8997->buck5_gpiodvs = pdata->buck5_gpiodvs;
1047 	memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
1048 	max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
1049 
1050 	nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
1051 			pdata->buck5_gpiodvs) ? 8 : 1;
1052 
1053 	for (i = 0; i < nr_dvs; i++) {
1054 		max8997->buck1_vol[i] = ret =
1055 			max8997_get_voltage_proper_val(
1056 					&buck1245_voltage_map_desc,
1057 					pdata->buck1_voltage[i],
1058 					pdata->buck1_voltage[i] +
1059 					buck1245_voltage_map_desc.step);
1060 		if (ret < 0)
1061 			return ret;
1062 
1063 		max8997->buck2_vol[i] = ret =
1064 			max8997_get_voltage_proper_val(
1065 					&buck1245_voltage_map_desc,
1066 					pdata->buck2_voltage[i],
1067 					pdata->buck2_voltage[i] +
1068 					buck1245_voltage_map_desc.step);
1069 		if (ret < 0)
1070 			return ret;
1071 
1072 		max8997->buck5_vol[i] = ret =
1073 			max8997_get_voltage_proper_val(
1074 					&buck1245_voltage_map_desc,
1075 					pdata->buck5_voltage[i],
1076 					pdata->buck5_voltage[i] +
1077 					buck1245_voltage_map_desc.step);
1078 		if (ret < 0)
1079 			return ret;
1080 
1081 		if (max_buck1 < max8997->buck1_vol[i])
1082 			max_buck1 = max8997->buck1_vol[i];
1083 		if (max_buck2 < max8997->buck2_vol[i])
1084 			max_buck2 = max8997->buck2_vol[i];
1085 		if (max_buck5 < max8997->buck5_vol[i])
1086 			max_buck5 = max8997->buck5_vol[i];
1087 	}
1088 
1089 	/* For the safety, set max voltage before setting up */
1090 	for (i = 0; i < 8; i++) {
1091 		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
1092 				max_buck1, 0x3f);
1093 		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
1094 				max_buck2, 0x3f);
1095 		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
1096 				max_buck5, 0x3f);
1097 	}
1098 
1099 	/* Initialize all the DVS related BUCK registers */
1100 	for (i = 0; i < nr_dvs; i++) {
1101 		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
1102 				max8997->buck1_vol[i],
1103 				0x3f);
1104 		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
1105 				max8997->buck2_vol[i],
1106 				0x3f);
1107 		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
1108 				max8997->buck5_vol[i],
1109 				0x3f);
1110 	}
1111 
1112 	/*
1113 	 * If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them.
1114 	 * If at least one of them cares, set gpios.
1115 	 */
1116 	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
1117 			pdata->buck5_gpiodvs) {
1118 
1119 		if (!gpio_is_valid(pdata->buck125_gpios[0]) ||
1120 				!gpio_is_valid(pdata->buck125_gpios[1]) ||
1121 				!gpio_is_valid(pdata->buck125_gpios[2])) {
1122 			dev_err(&pdev->dev, "GPIO NOT VALID\n");
1123 			return -EINVAL;
1124 		}
1125 
1126 		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0],
1127 					"MAX8997 SET1");
1128 		if (ret)
1129 			return ret;
1130 
1131 		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1],
1132 					"MAX8997 SET2");
1133 		if (ret)
1134 			return ret;
1135 
1136 		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2],
1137 				"MAX8997 SET3");
1138 		if (ret)
1139 			return ret;
1140 
1141 		gpio_direction_output(pdata->buck125_gpios[0],
1142 				(max8997->buck125_gpioindex >> 2)
1143 				& 0x1); /* SET1 */
1144 		gpio_direction_output(pdata->buck125_gpios[1],
1145 				(max8997->buck125_gpioindex >> 1)
1146 				& 0x1); /* SET2 */
1147 		gpio_direction_output(pdata->buck125_gpios[2],
1148 				(max8997->buck125_gpioindex >> 0)
1149 				& 0x1); /* SET3 */
1150 	}
1151 
1152 	/* DVS-GPIO disabled */
1153 	max8997_update_reg(i2c, MAX8997_REG_BUCK1CTRL, (pdata->buck1_gpiodvs) ?
1154 			(1 << 1) : (0 << 1), 1 << 1);
1155 	max8997_update_reg(i2c, MAX8997_REG_BUCK2CTRL, (pdata->buck2_gpiodvs) ?
1156 			(1 << 1) : (0 << 1), 1 << 1);
1157 	max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ?
1158 			(1 << 1) : (0 << 1), 1 << 1);
1159 
1160 	/* Misc Settings */
1161 	max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
1162 	max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
1163 
1164 	for (i = 0; i < pdata->num_regulators; i++) {
1165 		const struct voltage_map_desc *desc;
1166 		int id = pdata->regulators[i].id;
1167 
1168 		desc = reg_voltage_map[id];
1169 		if (desc) {
1170 			regulators[id].n_voltages =
1171 				(desc->max - desc->min) / desc->step + 1;
1172 		} else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) {
1173 			regulators[id].volt_table = safeoutvolt;
1174 			regulators[id].n_voltages = ARRAY_SIZE(safeoutvolt);
1175 		} else if (id == MAX8997_CHARGER_CV) {
1176 			regulators[id].n_voltages = 16;
1177 		}
1178 
1179 		config.dev = max8997->dev;
1180 		config.init_data = pdata->regulators[i].initdata;
1181 		config.driver_data = max8997;
1182 		config.of_node = pdata->regulators[i].reg_node;
1183 
1184 		rdev = devm_regulator_register(&pdev->dev, &regulators[id],
1185 					       &config);
1186 		if (IS_ERR(rdev)) {
1187 			dev_err(max8997->dev, "regulator init failed for %d\n",
1188 					id);
1189 			return PTR_ERR(rdev);
1190 		}
1191 	}
1192 
1193 	return 0;
1194 }
1195 
1196 static const struct platform_device_id max8997_pmic_id[] = {
1197 	{ "max8997-pmic", 0},
1198 	{ },
1199 };
1200 MODULE_DEVICE_TABLE(platform, max8997_pmic_id);
1201 
1202 static struct platform_driver max8997_pmic_driver = {
1203 	.driver = {
1204 		.name = "max8997-pmic",
1205 	},
1206 	.probe = max8997_pmic_probe,
1207 	.id_table = max8997_pmic_id,
1208 };
1209 
max8997_pmic_init(void)1210 static int __init max8997_pmic_init(void)
1211 {
1212 	return platform_driver_register(&max8997_pmic_driver);
1213 }
1214 subsys_initcall(max8997_pmic_init);
1215 
max8997_pmic_cleanup(void)1216 static void __exit max8997_pmic_cleanup(void)
1217 {
1218 	platform_driver_unregister(&max8997_pmic_driver);
1219 }
1220 module_exit(max8997_pmic_cleanup);
1221 
1222 MODULE_DESCRIPTION("MAXIM 8997/8966 Regulator Driver");
1223 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
1224 MODULE_LICENSE("GPL");
1225