1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * ALSA driver for ICEnsemble VT1724 (Envy24HT)
4 *
5 * Lowlevel functions for ONKYO WAVIO SE-90PCI and SE-200PCI
6 *
7 * Copyright (c) 2007 Shin-ya Okada sh_okada(at)d4.dion.ne.jp
8 * (at) -> @
9 */
10
11 #include <linux/delay.h>
12 #include <linux/interrupt.h>
13 #include <linux/init.h>
14 #include <linux/slab.h>
15 #include <sound/core.h>
16 #include <sound/tlv.h>
17
18 #include "ice1712.h"
19 #include "envy24ht.h"
20 #include "se.h"
21
22 struct se_spec {
23 struct {
24 unsigned char ch1, ch2;
25 } vol[8];
26 };
27
28 /****************************************************************************/
29 /* ONKYO WAVIO SE-200PCI */
30 /****************************************************************************/
31 /*
32 * system configuration ICE_EEP2_SYSCONF=0x4b
33 * XIN1 49.152MHz
34 * not have UART
35 * one stereo ADC and a S/PDIF receiver connected
36 * four stereo DACs connected
37 *
38 * AC-Link configuration ICE_EEP2_ACLINK=0x80
39 * use I2C, not use AC97
40 *
41 * I2S converters feature ICE_EEP2_I2S=0x78
42 * I2S codec has no volume/mute control feature
43 * I2S codec supports 96KHz and 192KHz
44 * I2S codec 24bits
45 *
46 * S/PDIF configuration ICE_EEP2_SPDIF=0xc3
47 * Enable integrated S/PDIF transmitter
48 * internal S/PDIF out implemented
49 * S/PDIF is stereo
50 * External S/PDIF out implemented
51 *
52 *
53 * ** connected chips **
54 *
55 * WM8740
56 * A 2ch-DAC of main outputs.
57 * It setuped as I2S mode by wire, so no way to setup from software.
58 * The sample-rate are automatically changed.
59 * ML/I2S (28pin) --------+
60 * MC/DM1 (27pin) -- 5V |
61 * MD/DM0 (26pin) -- GND |
62 * MUTEB (25pin) -- NC |
63 * MODE (24pin) -- GND |
64 * CSBIW (23pin) --------+
65 * |
66 * RSTB (22pin) --R(1K)-+
67 * Probably it reduce the noise from the control line.
68 *
69 * WM8766
70 * A 6ch-DAC for surrounds.
71 * It's control wire was connected to GPIOxx (3-wire serial interface)
72 * ML/I2S (11pin) -- GPIO18
73 * MC/IWL (12pin) -- GPIO17
74 * MD/DM (13pin) -- GPIO16
75 * MUTE (14pin) -- GPIO01
76 *
77 * WM8776
78 * A 2ch-ADC(with 10ch-selector) plus 2ch-DAC.
79 * It's control wire was connected to SDA/SCLK (2-wire serial interface)
80 * MODE (16pin) -- R(1K) -- GND
81 * CE (17pin) -- R(1K) -- GND 2-wire mode (address=0x34)
82 * DI (18pin) -- SDA
83 * CL (19pin) -- SCLK
84 *
85 *
86 * ** output pins and device names **
87 *
88 * 7.1ch name -- output connector color -- device (-D option)
89 *
90 * FRONT 2ch -- green -- plughw:0,0
91 * CENTER(Lch) SUBWOOFER(Rch) -- black -- plughw:0,2,0
92 * SURROUND 2ch -- orange -- plughw:0,2,1
93 * SURROUND BACK 2ch -- white -- plughw:0,2,2
94 *
95 */
96
97
98 /****************************************************************************/
99 /* WM8740 interface */
100 /****************************************************************************/
101
se200pci_WM8740_init(struct snd_ice1712 * ice)102 static void se200pci_WM8740_init(struct snd_ice1712 *ice)
103 {
104 /* nothing to do */
105 }
106
107
se200pci_WM8740_set_pro_rate(struct snd_ice1712 * ice,unsigned int rate)108 static void se200pci_WM8740_set_pro_rate(struct snd_ice1712 *ice,
109 unsigned int rate)
110 {
111 /* nothing to do */
112 }
113
114
115 /****************************************************************************/
116 /* WM8766 interface */
117 /****************************************************************************/
118
se200pci_WM8766_write(struct snd_ice1712 * ice,unsigned int addr,unsigned int data)119 static void se200pci_WM8766_write(struct snd_ice1712 *ice,
120 unsigned int addr, unsigned int data)
121 {
122 unsigned int st;
123 unsigned int bits;
124 int i;
125 const unsigned int DATA = 0x010000;
126 const unsigned int CLOCK = 0x020000;
127 const unsigned int LOAD = 0x040000;
128 const unsigned int ALL_MASK = (DATA | CLOCK | LOAD);
129
130 snd_ice1712_save_gpio_status(ice);
131
132 st = ((addr & 0x7f) << 9) | (data & 0x1ff);
133 snd_ice1712_gpio_set_dir(ice, ice->gpio.direction | ALL_MASK);
134 snd_ice1712_gpio_set_mask(ice, ice->gpio.write_mask & ~ALL_MASK);
135 bits = snd_ice1712_gpio_read(ice) & ~ALL_MASK;
136
137 snd_ice1712_gpio_write(ice, bits);
138 for (i = 0; i < 16; i++) {
139 udelay(1);
140 bits &= ~CLOCK;
141 st = (st << 1);
142 if (st & 0x10000)
143 bits |= DATA;
144 else
145 bits &= ~DATA;
146
147 snd_ice1712_gpio_write(ice, bits);
148
149 udelay(1);
150 bits |= CLOCK;
151 snd_ice1712_gpio_write(ice, bits);
152 }
153
154 udelay(1);
155 bits |= LOAD;
156 snd_ice1712_gpio_write(ice, bits);
157
158 udelay(1);
159 bits |= (DATA | CLOCK);
160 snd_ice1712_gpio_write(ice, bits);
161
162 snd_ice1712_restore_gpio_status(ice);
163 }
164
se200pci_WM8766_set_volume(struct snd_ice1712 * ice,int ch,unsigned int vol1,unsigned int vol2)165 static void se200pci_WM8766_set_volume(struct snd_ice1712 *ice, int ch,
166 unsigned int vol1, unsigned int vol2)
167 {
168 switch (ch) {
169 case 0:
170 se200pci_WM8766_write(ice, 0x000, vol1);
171 se200pci_WM8766_write(ice, 0x001, vol2 | 0x100);
172 break;
173 case 1:
174 se200pci_WM8766_write(ice, 0x004, vol1);
175 se200pci_WM8766_write(ice, 0x005, vol2 | 0x100);
176 break;
177 case 2:
178 se200pci_WM8766_write(ice, 0x006, vol1);
179 se200pci_WM8766_write(ice, 0x007, vol2 | 0x100);
180 break;
181 }
182 }
183
se200pci_WM8766_init(struct snd_ice1712 * ice)184 static void se200pci_WM8766_init(struct snd_ice1712 *ice)
185 {
186 se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */
187 udelay(10);
188
189 se200pci_WM8766_set_volume(ice, 0, 0, 0); /* volume L=0 R=0 */
190 se200pci_WM8766_set_volume(ice, 1, 0, 0); /* volume L=0 R=0 */
191 se200pci_WM8766_set_volume(ice, 2, 0, 0); /* volume L=0 R=0 */
192
193 se200pci_WM8766_write(ice, 0x03, 0x022); /* serial mode I2S-24bits */
194 se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
195 se200pci_WM8766_write(ice, 0x12, 0x000); /* MDP=0 */
196 se200pci_WM8766_write(ice, 0x15, 0x000); /* MDP=0 */
197 se200pci_WM8766_write(ice, 0x09, 0x000); /* demp=off mute=off */
198
199 se200pci_WM8766_write(ice, 0x02, 0x124); /* ch-assign L=L R=R RESET */
200 se200pci_WM8766_write(ice, 0x02, 0x120); /* ch-assign L=L R=R */
201 }
202
se200pci_WM8766_set_pro_rate(struct snd_ice1712 * ice,unsigned int rate)203 static void se200pci_WM8766_set_pro_rate(struct snd_ice1712 *ice,
204 unsigned int rate)
205 {
206 if (rate > 96000)
207 se200pci_WM8766_write(ice, 0x0a, 0x000); /* MCLK=128fs */
208 else
209 se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
210 }
211
212
213 /****************************************************************************/
214 /* WM8776 interface */
215 /****************************************************************************/
216
se200pci_WM8776_write(struct snd_ice1712 * ice,unsigned int addr,unsigned int data)217 static void se200pci_WM8776_write(struct snd_ice1712 *ice,
218 unsigned int addr, unsigned int data)
219 {
220 unsigned int val;
221
222 val = (addr << 9) | data;
223 snd_vt1724_write_i2c(ice, 0x34, val >> 8, val & 0xff);
224 }
225
226
se200pci_WM8776_set_output_volume(struct snd_ice1712 * ice,unsigned int vol1,unsigned int vol2)227 static void se200pci_WM8776_set_output_volume(struct snd_ice1712 *ice,
228 unsigned int vol1, unsigned int vol2)
229 {
230 se200pci_WM8776_write(ice, 0x03, vol1);
231 se200pci_WM8776_write(ice, 0x04, vol2 | 0x100);
232 }
233
se200pci_WM8776_set_input_volume(struct snd_ice1712 * ice,unsigned int vol1,unsigned int vol2)234 static void se200pci_WM8776_set_input_volume(struct snd_ice1712 *ice,
235 unsigned int vol1, unsigned int vol2)
236 {
237 se200pci_WM8776_write(ice, 0x0e, vol1);
238 se200pci_WM8776_write(ice, 0x0f, vol2 | 0x100);
239 }
240
241 static const char * const se200pci_sel[] = {
242 "LINE-IN", "CD-IN", "MIC-IN", "ALL-MIX", NULL
243 };
244
se200pci_WM8776_set_input_selector(struct snd_ice1712 * ice,unsigned int sel)245 static void se200pci_WM8776_set_input_selector(struct snd_ice1712 *ice,
246 unsigned int sel)
247 {
248 static const unsigned char vals[] = {
249 /* LINE, CD, MIC, ALL, GND */
250 0x10, 0x04, 0x08, 0x1c, 0x03
251 };
252 if (sel > 4)
253 sel = 4;
254 se200pci_WM8776_write(ice, 0x15, vals[sel]);
255 }
256
se200pci_WM8776_set_afl(struct snd_ice1712 * ice,unsigned int afl)257 static void se200pci_WM8776_set_afl(struct snd_ice1712 *ice, unsigned int afl)
258 {
259 /* AFL -- After Fader Listening */
260 if (afl)
261 se200pci_WM8776_write(ice, 0x16, 0x005);
262 else
263 se200pci_WM8776_write(ice, 0x16, 0x001);
264 }
265
266 static const char * const se200pci_agc[] = {
267 "Off", "LimiterMode", "ALCMode", NULL
268 };
269
se200pci_WM8776_set_agc(struct snd_ice1712 * ice,unsigned int agc)270 static void se200pci_WM8776_set_agc(struct snd_ice1712 *ice, unsigned int agc)
271 {
272 /* AGC -- Auto Gain Control of the input */
273 switch (agc) {
274 case 0:
275 se200pci_WM8776_write(ice, 0x11, 0x000); /* Off */
276 break;
277 case 1:
278 se200pci_WM8776_write(ice, 0x10, 0x07b);
279 se200pci_WM8776_write(ice, 0x11, 0x100); /* LimiterMode */
280 break;
281 case 2:
282 se200pci_WM8776_write(ice, 0x10, 0x1fb);
283 se200pci_WM8776_write(ice, 0x11, 0x100); /* ALCMode */
284 break;
285 }
286 }
287
se200pci_WM8776_init(struct snd_ice1712 * ice)288 static void se200pci_WM8776_init(struct snd_ice1712 *ice)
289 {
290 int i;
291 static const unsigned short default_values[] = {
292 0x100, 0x100, 0x100,
293 0x100, 0x100, 0x100,
294 0x000, 0x090, 0x000, 0x000,
295 0x022, 0x022, 0x022,
296 0x008, 0x0cf, 0x0cf, 0x07b, 0x000,
297 0x032, 0x000, 0x0a6, 0x001, 0x001
298 };
299
300 se200pci_WM8776_write(ice, 0x17, 0x000); /* reset all */
301 /* ADC and DAC interface is I2S 24bits mode */
302 /* The sample-rate are automatically changed */
303 udelay(10);
304 /* BUT my board can not do reset all, so I load all by manually. */
305 for (i = 0; i < ARRAY_SIZE(default_values); i++)
306 se200pci_WM8776_write(ice, i, default_values[i]);
307
308 se200pci_WM8776_set_input_selector(ice, 0);
309 se200pci_WM8776_set_afl(ice, 0);
310 se200pci_WM8776_set_agc(ice, 0);
311 se200pci_WM8776_set_input_volume(ice, 0, 0);
312 se200pci_WM8776_set_output_volume(ice, 0, 0);
313
314 /* head phone mute and power down */
315 se200pci_WM8776_write(ice, 0x00, 0);
316 se200pci_WM8776_write(ice, 0x01, 0);
317 se200pci_WM8776_write(ice, 0x02, 0x100);
318 se200pci_WM8776_write(ice, 0x0d, 0x080);
319 }
320
se200pci_WM8776_set_pro_rate(struct snd_ice1712 * ice,unsigned int rate)321 static void se200pci_WM8776_set_pro_rate(struct snd_ice1712 *ice,
322 unsigned int rate)
323 {
324 /* nothing to do */
325 }
326
327
328 /****************************************************************************/
329 /* runtime interface */
330 /****************************************************************************/
331
se200pci_set_pro_rate(struct snd_ice1712 * ice,unsigned int rate)332 static void se200pci_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate)
333 {
334 se200pci_WM8740_set_pro_rate(ice, rate);
335 se200pci_WM8766_set_pro_rate(ice, rate);
336 se200pci_WM8776_set_pro_rate(ice, rate);
337 }
338
339 struct se200pci_control {
340 const char *name;
341 enum {
342 WM8766,
343 WM8776in,
344 WM8776out,
345 WM8776sel,
346 WM8776agc,
347 WM8776afl
348 } target;
349 enum { VOLUME1, VOLUME2, BOOLEAN, ENUM } type;
350 int ch;
351 const char * const *member;
352 const char *comment;
353 };
354
355 static const struct se200pci_control se200pci_cont[] = {
356 {
357 .name = "Front Playback Volume",
358 .target = WM8776out,
359 .type = VOLUME1,
360 .comment = "Front(green)"
361 },
362 {
363 .name = "Side Playback Volume",
364 .target = WM8766,
365 .type = VOLUME1,
366 .ch = 1,
367 .comment = "Surround(orange)"
368 },
369 {
370 .name = "Surround Playback Volume",
371 .target = WM8766,
372 .type = VOLUME1,
373 .ch = 2,
374 .comment = "SurroundBack(white)"
375 },
376 {
377 .name = "CLFE Playback Volume",
378 .target = WM8766,
379 .type = VOLUME1,
380 .ch = 0,
381 .comment = "Center(Lch)&SubWoofer(Rch)(black)"
382 },
383 {
384 .name = "Capture Volume",
385 .target = WM8776in,
386 .type = VOLUME2
387 },
388 {
389 .name = "Capture Select",
390 .target = WM8776sel,
391 .type = ENUM,
392 .member = se200pci_sel
393 },
394 {
395 .name = "AGC Capture Mode",
396 .target = WM8776agc,
397 .type = ENUM,
398 .member = se200pci_agc
399 },
400 {
401 .name = "AFL Bypass Playback Switch",
402 .target = WM8776afl,
403 .type = BOOLEAN
404 }
405 };
406
se200pci_get_enum_count(int n)407 static int se200pci_get_enum_count(int n)
408 {
409 const char * const *member;
410 int c;
411
412 member = se200pci_cont[n].member;
413 if (!member)
414 return 0;
415 for (c = 0; member[c]; c++)
416 ;
417 return c;
418 }
419
se200pci_cont_volume_info(struct snd_kcontrol * kc,struct snd_ctl_elem_info * uinfo)420 static int se200pci_cont_volume_info(struct snd_kcontrol *kc,
421 struct snd_ctl_elem_info *uinfo)
422 {
423 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
424 uinfo->count = 2;
425 uinfo->value.integer.min = 0; /* mute */
426 uinfo->value.integer.max = 0xff; /* 0dB */
427 return 0;
428 }
429
430 #define se200pci_cont_boolean_info snd_ctl_boolean_mono_info
431
se200pci_cont_enum_info(struct snd_kcontrol * kc,struct snd_ctl_elem_info * uinfo)432 static int se200pci_cont_enum_info(struct snd_kcontrol *kc,
433 struct snd_ctl_elem_info *uinfo)
434 {
435 int n, c;
436
437 n = kc->private_value;
438 c = se200pci_get_enum_count(n);
439 if (!c)
440 return -EINVAL;
441 return snd_ctl_enum_info(uinfo, 1, c, se200pci_cont[n].member);
442 }
443
se200pci_cont_volume_get(struct snd_kcontrol * kc,struct snd_ctl_elem_value * uc)444 static int se200pci_cont_volume_get(struct snd_kcontrol *kc,
445 struct snd_ctl_elem_value *uc)
446 {
447 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
448 struct se_spec *spec = ice->spec;
449 int n = kc->private_value;
450 uc->value.integer.value[0] = spec->vol[n].ch1;
451 uc->value.integer.value[1] = spec->vol[n].ch2;
452 return 0;
453 }
454
se200pci_cont_boolean_get(struct snd_kcontrol * kc,struct snd_ctl_elem_value * uc)455 static int se200pci_cont_boolean_get(struct snd_kcontrol *kc,
456 struct snd_ctl_elem_value *uc)
457 {
458 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
459 struct se_spec *spec = ice->spec;
460 int n = kc->private_value;
461 uc->value.integer.value[0] = spec->vol[n].ch1;
462 return 0;
463 }
464
se200pci_cont_enum_get(struct snd_kcontrol * kc,struct snd_ctl_elem_value * uc)465 static int se200pci_cont_enum_get(struct snd_kcontrol *kc,
466 struct snd_ctl_elem_value *uc)
467 {
468 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
469 struct se_spec *spec = ice->spec;
470 int n = kc->private_value;
471 uc->value.enumerated.item[0] = spec->vol[n].ch1;
472 return 0;
473 }
474
se200pci_cont_update(struct snd_ice1712 * ice,int n)475 static void se200pci_cont_update(struct snd_ice1712 *ice, int n)
476 {
477 struct se_spec *spec = ice->spec;
478 switch (se200pci_cont[n].target) {
479 case WM8766:
480 se200pci_WM8766_set_volume(ice,
481 se200pci_cont[n].ch,
482 spec->vol[n].ch1,
483 spec->vol[n].ch2);
484 break;
485
486 case WM8776in:
487 se200pci_WM8776_set_input_volume(ice,
488 spec->vol[n].ch1,
489 spec->vol[n].ch2);
490 break;
491
492 case WM8776out:
493 se200pci_WM8776_set_output_volume(ice,
494 spec->vol[n].ch1,
495 spec->vol[n].ch2);
496 break;
497
498 case WM8776sel:
499 se200pci_WM8776_set_input_selector(ice,
500 spec->vol[n].ch1);
501 break;
502
503 case WM8776agc:
504 se200pci_WM8776_set_agc(ice, spec->vol[n].ch1);
505 break;
506
507 case WM8776afl:
508 se200pci_WM8776_set_afl(ice, spec->vol[n].ch1);
509 break;
510
511 default:
512 break;
513 }
514 }
515
se200pci_cont_volume_put(struct snd_kcontrol * kc,struct snd_ctl_elem_value * uc)516 static int se200pci_cont_volume_put(struct snd_kcontrol *kc,
517 struct snd_ctl_elem_value *uc)
518 {
519 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
520 struct se_spec *spec = ice->spec;
521 int n = kc->private_value;
522 unsigned int vol1, vol2;
523 int changed;
524
525 changed = 0;
526 vol1 = uc->value.integer.value[0] & 0xff;
527 vol2 = uc->value.integer.value[1] & 0xff;
528 if (spec->vol[n].ch1 != vol1) {
529 spec->vol[n].ch1 = vol1;
530 changed = 1;
531 }
532 if (spec->vol[n].ch2 != vol2) {
533 spec->vol[n].ch2 = vol2;
534 changed = 1;
535 }
536 if (changed)
537 se200pci_cont_update(ice, n);
538
539 return changed;
540 }
541
se200pci_cont_boolean_put(struct snd_kcontrol * kc,struct snd_ctl_elem_value * uc)542 static int se200pci_cont_boolean_put(struct snd_kcontrol *kc,
543 struct snd_ctl_elem_value *uc)
544 {
545 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
546 struct se_spec *spec = ice->spec;
547 int n = kc->private_value;
548 unsigned int vol1;
549
550 vol1 = !!uc->value.integer.value[0];
551 if (spec->vol[n].ch1 != vol1) {
552 spec->vol[n].ch1 = vol1;
553 se200pci_cont_update(ice, n);
554 return 1;
555 }
556 return 0;
557 }
558
se200pci_cont_enum_put(struct snd_kcontrol * kc,struct snd_ctl_elem_value * uc)559 static int se200pci_cont_enum_put(struct snd_kcontrol *kc,
560 struct snd_ctl_elem_value *uc)
561 {
562 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
563 struct se_spec *spec = ice->spec;
564 int n = kc->private_value;
565 unsigned int vol1;
566
567 vol1 = uc->value.enumerated.item[0];
568 if (vol1 >= se200pci_get_enum_count(n))
569 return -EINVAL;
570 if (spec->vol[n].ch1 != vol1) {
571 spec->vol[n].ch1 = vol1;
572 se200pci_cont_update(ice, n);
573 return 1;
574 }
575 return 0;
576 }
577
578 static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1);
579 static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1);
580
se200pci_add_controls(struct snd_ice1712 * ice)581 static int se200pci_add_controls(struct snd_ice1712 *ice)
582 {
583 int i;
584 struct snd_kcontrol_new cont;
585 int err;
586
587 memset(&cont, 0, sizeof(cont));
588 cont.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
589 for (i = 0; i < ARRAY_SIZE(se200pci_cont); i++) {
590 cont.private_value = i;
591 cont.name = se200pci_cont[i].name;
592 cont.access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
593 cont.tlv.p = NULL;
594 switch (se200pci_cont[i].type) {
595 case VOLUME1:
596 case VOLUME2:
597 cont.info = se200pci_cont_volume_info;
598 cont.get = se200pci_cont_volume_get;
599 cont.put = se200pci_cont_volume_put;
600 cont.access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
601 if (se200pci_cont[i].type == VOLUME1)
602 cont.tlv.p = db_scale_gain1;
603 else
604 cont.tlv.p = db_scale_gain2;
605 break;
606 case BOOLEAN:
607 cont.info = se200pci_cont_boolean_info;
608 cont.get = se200pci_cont_boolean_get;
609 cont.put = se200pci_cont_boolean_put;
610 break;
611 case ENUM:
612 cont.info = se200pci_cont_enum_info;
613 cont.get = se200pci_cont_enum_get;
614 cont.put = se200pci_cont_enum_put;
615 break;
616 default:
617 snd_BUG();
618 return -EINVAL;
619 }
620 err = snd_ctl_add(ice->card, snd_ctl_new1(&cont, ice));
621 if (err < 0)
622 return err;
623 }
624
625 return 0;
626 }
627
628
629 /****************************************************************************/
630 /* ONKYO WAVIO SE-90PCI */
631 /****************************************************************************/
632 /*
633 * system configuration ICE_EEP2_SYSCONF=0x4b
634 * AC-Link configuration ICE_EEP2_ACLINK=0x80
635 * I2S converters feature ICE_EEP2_I2S=0x78
636 * S/PDIF configuration ICE_EEP2_SPDIF=0xc3
637 *
638 * ** connected chip **
639 *
640 * WM8716
641 * A 2ch-DAC of main outputs.
642 * It setuped as I2S mode by wire, so no way to setup from software.
643 * ML/I2S (28pin) -- +5V
644 * MC/DM1 (27pin) -- GND
645 * MC/DM0 (26pin) -- GND
646 * MUTEB (25pin) -- open (internal pull-up)
647 * MODE (24pin) -- GND
648 * CSBIWO (23pin) -- +5V
649 *
650 */
651
652 /* Nothing to do for this chip. */
653
654
655 /****************************************************************************/
656 /* probe/initialize/setup */
657 /****************************************************************************/
658
se_init(struct snd_ice1712 * ice)659 static int se_init(struct snd_ice1712 *ice)
660 {
661 struct se_spec *spec;
662
663 spec = kzalloc(sizeof(*spec), GFP_KERNEL);
664 if (!spec)
665 return -ENOMEM;
666 ice->spec = spec;
667
668 if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE90PCI) {
669 ice->num_total_dacs = 2;
670 ice->num_total_adcs = 0;
671 ice->vt1720 = 1;
672 return 0;
673
674 } else if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) {
675 ice->num_total_dacs = 8;
676 ice->num_total_adcs = 2;
677 se200pci_WM8740_init(ice);
678 se200pci_WM8766_init(ice);
679 se200pci_WM8776_init(ice);
680 ice->gpio.set_pro_rate = se200pci_set_pro_rate;
681 return 0;
682 }
683
684 return -ENOENT;
685 }
686
se_add_controls(struct snd_ice1712 * ice)687 static int se_add_controls(struct snd_ice1712 *ice)
688 {
689 int err;
690
691 err = 0;
692 /* nothing to do for VT1724_SUBDEVICE_SE90PCI */
693 if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI)
694 err = se200pci_add_controls(ice);
695
696 return err;
697 }
698
699
700 /****************************************************************************/
701 /* entry point */
702 /****************************************************************************/
703
704 static const unsigned char se200pci_eeprom[] = {
705 [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
706 [ICE_EEP2_ACLINK] = 0x80, /* I2S */
707 [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
708 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
709
710 [ICE_EEP2_GPIO_DIR] = 0x02, /* WM8766 mute 1=output */
711 [ICE_EEP2_GPIO_DIR1] = 0x00, /* not used */
712 [ICE_EEP2_GPIO_DIR2] = 0x07, /* WM8766 ML/MC/MD 1=output */
713
714 [ICE_EEP2_GPIO_MASK] = 0x00, /* 0=writable */
715 [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0=writable */
716 [ICE_EEP2_GPIO_MASK2] = 0x00, /* 0=writable */
717
718 [ICE_EEP2_GPIO_STATE] = 0x00, /* WM8766 mute=0 */
719 [ICE_EEP2_GPIO_STATE1] = 0x00, /* not used */
720 [ICE_EEP2_GPIO_STATE2] = 0x07, /* WM8766 ML/MC/MD */
721 };
722
723 static const unsigned char se90pci_eeprom[] = {
724 [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
725 [ICE_EEP2_ACLINK] = 0x80, /* I2S */
726 [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
727 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
728
729 /* ALL GPIO bits are in input mode */
730 };
731
732 struct snd_ice1712_card_info snd_vt1724_se_cards[] = {
733 {
734 .subvendor = VT1724_SUBDEVICE_SE200PCI,
735 .name = "ONKYO SE200PCI",
736 .model = "se200pci",
737 .chip_init = se_init,
738 .build_controls = se_add_controls,
739 .eeprom_size = sizeof(se200pci_eeprom),
740 .eeprom_data = se200pci_eeprom,
741 },
742 {
743 .subvendor = VT1724_SUBDEVICE_SE90PCI,
744 .name = "ONKYO SE90PCI",
745 .model = "se90pci",
746 .chip_init = se_init,
747 .build_controls = se_add_controls,
748 .eeprom_size = sizeof(se90pci_eeprom),
749 .eeprom_data = se90pci_eeprom,
750 },
751 {} /*terminator*/
752 };
753