1 2-- 3-- whisp-aps-mib.mib 4-- GENERATED FROM ui_db.xml 5-- 6-- ******************************************************************************************************* 7-- Copyright 2005 - 2015 (c), Cambium Networks 8-- Cambium Networks Confidential Proprietary 9-- ******************************************************************************************************* 10-- 11-- Canopy Access Point and Backhaul Timing Master specific MIB definitions. 12-- 13-- ******************************************************************************************************** 14 15WHISP-APS-MIB DEFINITIONS ::= BEGIN 16IMPORTS 17 MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, TimeTicks, Unsigned32 18 FROM SNMPv2-SMI 19 DisplayString, PhysAddress, MacAddress 20 FROM SNMPv2-TC 21 OBJECT-GROUP 22 FROM SNMPv2-CONF 23 WhispLUID, WhispMACAddress, EventString 24 FROM WHISP-TCV2-MIB 25 whispModules, whispBox, whispAps 26 FROM WHISP-GLOBAL-REG-MIB 27 whispBoxEsn, whispBoxRFPhysicalRadioEntry 28 FROM WHISP-BOX-MIBV2-MIB 29 ; 30 31whispApsMibModule MODULE-IDENTITY 32 LAST-UPDATED "200304150000Z" 33 ORGANIZATION "Cambium Networks" 34 CONTACT-INFO 35 "Cambium Networks Support 36 email: support@cambiumnetworks.com" 37 DESCRIPTION 38 "This module contains MIB definitions for APs." 39 ::= {whispModules 12} 40 41-- ------------------------------------------------------------------------- 42-- Top Level Registrations 43 44whispApsConfig OBJECT IDENTIFIER ::= {whispAps 1} 45whispApsLink OBJECT IDENTIFIER ::= {whispAps 2} 46whispApsLinkTestConfig OBJECT IDENTIFIER ::= {whispApsLink 1} 47whispApsLinkTestResult OBJECT IDENTIFIER ::= {whispApsLink 2} 48whispApsGPS OBJECT IDENTIFIER ::= {whispAps 3} 49whispApsEvent OBJECT IDENTIFIER ::= {whispAps 5} 50whispApsRegEvent OBJECT IDENTIFIER ::= {whispApsEvent 1} 51whispGPSEvent OBJECT IDENTIFIER ::= {whispApsEvent 2} 52whispApsDfsEvent OBJECT IDENTIFIER ::= {whispApsEvent 3} 53whispApRegulatoryEvent OBJECT IDENTIFIER ::= {whispApsEvent 4} 54whispApRFOverloadEvent OBJECT IDENTIFIER ::= {whispApsEvent 5} 55whispApsMumimoTrialEvent OBJECT IDENTIFIER ::= {whispApsEvent 6} 56whispApsGroups OBJECT IDENTIFIER ::= {whispAps 6} 57whispApsFrUtlStats OBJECT IDENTIFIER ::= {whispAps 12} 58whispApsFrUtlStatsIntervalLow OBJECT IDENTIFIER ::= {whispApsFrUtlStats 1} 59whispApsFrUtlStatsIntervalMedium OBJECT IDENTIFIER ::= {whispApsFrUtlStats 2} 60whispApsFrUtlStatsIntervalHigh OBJECT IDENTIFIER ::= {whispApsFrUtlStats 3} 61whispApsStatus OBJECT IDENTIFIER ::= {whispAps 7} 62whispApsDNS OBJECT IDENTIFIER ::= {whispAps 9} 63whispApsControls OBJECT IDENTIFIER ::= {whispAps 11} 64whispApsLQI OBJECT IDENTIFIER ::= {whispAps 13} 65whispApsRFConfig OBJECT IDENTIFIER ::= {whispAps 10} 66 67-- ------------------------------------------------------------------------- 68 69 70 gpsInput OBJECT-TYPE 71 SYNTAX INTEGER { 72 generateSyncSignal(0), 73 syncToReceivedSignalTimingPort(1), 74 syncToReceivedSignalPowerPort(2)} 75 MAX-ACCESS read-write 76 STATUS obsolete 77 DESCRIPTION 78 "The variable is deprecated. See gpsInput in whispBoxConfig." 79 ::={whispApsConfig 1} 80 81 rfFreqCarrier OBJECT-TYPE 82 SYNTAX INTEGER { 83 wired(0)} 84 MAX-ACCESS read-write 85 STATUS deprecated 86 DESCRIPTION 87 "The primary transmit frequency. 88 Also see radioFreqCarrier." 89 ::={whispApsConfig 2} 90 91 apLinkSpeed OBJECT-TYPE 92 SYNTAX DisplayString 93 MAX-ACCESS read-write 94 STATUS obsolete 95 DESCRIPTION 96 "The variable is deprecated." 97 ::={whispApsConfig 3} 98 99 dwnLnkData OBJECT-TYPE 100 SYNTAX INTEGER (1..99) 101 UNITS "%" 102 MAX-ACCESS read-write 103 STATUS deprecated 104 DESCRIPTION 105 "This attribute is deprecated. Please see radioDownlinkPercent." 106 ::={whispApsConfig 4} 107 108 highPriorityUpLnkPct OBJECT-TYPE 109 SYNTAX INTEGER (0..99) 110 UNITS "%" 111 MAX-ACCESS read-write 112 STATUS obsolete 113 DESCRIPTION 114 "Percentage of uplink slots for high priority data." 115 ::={whispApsConfig 5} 116 117 numUAckSlots OBJECT-TYPE 118 SYNTAX INTEGER 119 MAX-ACCESS read-write 120 STATUS obsolete 121 DESCRIPTION 122 "Total number of upstream ack slots." 123 ::={whispApsConfig 6} 124 125 uAcksReservHigh OBJECT-TYPE 126 SYNTAX INTEGER 127 MAX-ACCESS read-write 128 STATUS obsolete 129 DESCRIPTION 130 "Total number of upstream high priority ack slots" 131 ::={whispApsConfig 7} 132 133 numDAckSlots OBJECT-TYPE 134 SYNTAX INTEGER 135 MAX-ACCESS read-write 136 STATUS obsolete 137 DESCRIPTION 138 "Total number of downstream ack slots." 139 ::={whispApsConfig 8} 140 141 dAcksReservHigh OBJECT-TYPE 142 SYNTAX INTEGER 143 MAX-ACCESS read-write 144 STATUS obsolete 145 DESCRIPTION 146 "Total number of high priority downstream ack slots." 147 ::={whispApsConfig 9} 148 149 numCtlSlots OBJECT-TYPE 150 SYNTAX INTEGER 151 MAX-ACCESS read-write 152 STATUS obsolete 153 DESCRIPTION 154 "This OID is deprecated, please use numCtlSlotsHW." 155 ::={whispApsConfig 10} 156 157 numCtlSlotsReserveHigh OBJECT-TYPE 158 SYNTAX INTEGER 159 MAX-ACCESS read-write 160 STATUS obsolete 161 DESCRIPTION 162 "Total number of High priority upstream control (contention) slots." 163 ::={whispApsConfig 11} 164 165 upLnkDataRate OBJECT-TYPE 166 SYNTAX INTEGER 167 UNITS "Kilobits/sec" 168 MAX-ACCESS read-write 169 STATUS current 170 DESCRIPTION 171 "Sustained uplink bandwidth cap." 172 ::={whispApsConfig 12} 173 174 upLnkLimit OBJECT-TYPE 175 SYNTAX INTEGER 176 UNITS "Kilobits/sec" 177 MAX-ACCESS read-write 178 STATUS current 179 DESCRIPTION 180 "Burst uplink bandwidth cap." 181 ::={whispApsConfig 13} 182 183 dwnLnkDataRate OBJECT-TYPE 184 SYNTAX INTEGER 185 UNITS "Kilobits/sec" 186 MAX-ACCESS read-write 187 STATUS current 188 DESCRIPTION 189 "Sustained downlink bandwidth cap." 190 ::={whispApsConfig 14} 191 192 dwnLnkLimit OBJECT-TYPE 193 SYNTAX INTEGER 194 UNITS "Kilobits/sec" 195 MAX-ACCESS read-write 196 STATUS current 197 DESCRIPTION 198 "Burst downlink bandwidth cap." 199 ::={whispApsConfig 15} 200 201 sectorID OBJECT-TYPE 202 SYNTAX INTEGER (0..15) 203 MAX-ACCESS read-write 204 STATUS current 205 DESCRIPTION 206 "Advertise sector number for an AP. 207 Not supported on 450 platform." 208 ::={whispApsConfig 16} 209 210 maxRange OBJECT-TYPE 211 SYNTAX INTEGER 212 UNITS "miles" 213 MAX-ACCESS read-write 214 STATUS deprecated 215 DESCRIPTION 216 "This attribute is deprecated. Please see radioMaxRange." 217 ::={whispApsConfig 17} 218 219 airLinkSecurity OBJECT-TYPE 220 SYNTAX INTEGER { 221 standard(0), 222 desEnhanced(1), 223 desEnhancedAndAuthentication(2), 224 authenticationIfAvailable(3)} 225 MAX-ACCESS read-write 226 STATUS obsolete 227 DESCRIPTION 228 "Air Link Security. 229 desEnhancedAndAuthentication(2) and authenticationIfAvailable(3) 230 are only for APAS." 231 ::={whispApsConfig 18} 232 233 berMode OBJECT-TYPE 234 SYNTAX INTEGER { 235 berStream(0), 236 noBerStream(1)} 237 MAX-ACCESS read-write 238 STATUS obsolete 239 DESCRIPTION 240 "AP backgroup BER mode." 241 ::={whispApsConfig 19} 242 243 asIP1 OBJECT-TYPE 244 SYNTAX IpAddress 245 MAX-ACCESS read-write 246 STATUS obsolete 247 DESCRIPTION 248 "Obsoleted. Configure with whispApsDNS.authServer1." 249 ::={whispApsConfig 20} 250 251 asIP2 OBJECT-TYPE 252 SYNTAX IpAddress 253 MAX-ACCESS read-write 254 STATUS obsolete 255 DESCRIPTION 256 "Obsoleted. Configure with whispApsDNS.authServer2." 257 ::={whispApsConfig 21} 258 259 asIP3 OBJECT-TYPE 260 SYNTAX IpAddress 261 MAX-ACCESS read-write 262 STATUS obsolete 263 DESCRIPTION 264 "Obsoleted. Configure with whispApsDNS.authServer3." 265 ::={whispApsConfig 22} 266 267 lanIpAp OBJECT-TYPE 268 SYNTAX IpAddress 269 MAX-ACCESS read-write 270 STATUS current 271 DESCRIPTION 272 "LAN IP." 273 ::={whispApsConfig 23} 274 275 lanMaskAp OBJECT-TYPE 276 SYNTAX IpAddress 277 MAX-ACCESS read-write 278 STATUS current 279 DESCRIPTION 280 "LAN subnet mask." 281 ::={whispApsConfig 24} 282 283 defaultGwAp OBJECT-TYPE 284 SYNTAX IpAddress 285 MAX-ACCESS read-write 286 STATUS current 287 DESCRIPTION 288 "Default gateway" 289 ::={whispApsConfig 25} 290 291 privateIp OBJECT-TYPE 292 SYNTAX IpAddress 293 MAX-ACCESS read-write 294 STATUS current 295 DESCRIPTION 296 "Private IP." 297 ::={whispApsConfig 26} 298 299 gpsTrap OBJECT-TYPE 300 SYNTAX INTEGER { 301 gpsTrapDisabled(0), 302 gpsTrapEnabled(1)} 303 MAX-ACCESS read-write 304 STATUS current 305 DESCRIPTION 306 "Variable to enable/disable GPS sync/out-sync traps." 307 ::={whispApsConfig 27} 308 309 regTrap OBJECT-TYPE 310 SYNTAX INTEGER { 311 regTrapDisabled(0), 312 regTrapEnabled(1)} 313 MAX-ACCESS read-write 314 STATUS current 315 DESCRIPTION 316 "Variable to enable/disable registration complete/lost traps." 317 ::={whispApsConfig 28} 318 319 txSpreading OBJECT-TYPE 320 SYNTAX INTEGER { 321 txSpreadingDisabled(0), 322 txSpreadingEnabled(1)} 323 MAX-ACCESS read-write 324 STATUS current 325 DESCRIPTION 326 "Variable to enable/disable Transmit Frame Spreading. This option is for FSK only." 327 ::={whispApsConfig 29} 328 329 apBeaconInfo OBJECT-TYPE 330 SYNTAX INTEGER { 331 enableApBeaconInfo(0), 332 disableApBeaconInfo(1)} 333 MAX-ACCESS read-write 334 STATUS current 335 DESCRIPTION 336 "Variable to enable/disable displaying AP beacon info through AP eval." 337 ::={whispApsConfig 30} 338 339 authMode OBJECT-TYPE 340 SYNTAX INTEGER { 341 authenticationDisabled(0), 342 authenticationRequiredBam(1), 343 authenticationRequiredAP(3), 344 authenticationRequiredAAA(4)} 345 MAX-ACCESS read-write 346 STATUS current 347 DESCRIPTION 348 "Variable to enable/disable authentication. The authentication optional mode 349 is for APs only. This variable can only be set when authentication feature 350 is enabled. Setting it to 1 will use a BAM server for authentication of SMs. Setting 351 it to 2 will make use of the Authentication Key on the AP for authenticating SMs. The 352 keys must match on SM and AP in order for the SM to be authenticated in this mode." 353 ::={whispApsConfig 31} 354 355 authKeyAp OBJECT-TYPE 356 SYNTAX DisplayString 357 MAX-ACCESS read-write 358 STATUS current 359 DESCRIPTION 360 "Authentication key. It should be 32 character long. Can be used on MultiPoint AP if AP Authentication mode is selected. 361 Otherwise, it is used on Backhauls." 362 ::={whispApsConfig 32} 363 364 encryptionMode OBJECT-TYPE 365 SYNTAX INTEGER { 366 encryptionDisabled(0), 367 encryptionEnabled(1)} 368 MAX-ACCESS read-write 369 STATUS current 370 DESCRIPTION 371 "Variable to enable/disable encryption." 372 ::={whispApsConfig 33} 373 374 ntpServerIp OBJECT-TYPE 375 SYNTAX IpAddress 376 MAX-ACCESS read-write 377 STATUS obsolete 378 DESCRIPTION 379 "Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3." 380 ::={whispApsConfig 34} 381 382 broadcastRetryCount OBJECT-TYPE 383 SYNTAX INTEGER 384 MAX-ACCESS read-write 385 STATUS current 386 DESCRIPTION 387 "Broadcast Repeat Count : Range 0 -- 2. For APs." 388 ::={whispApsConfig 35} 389 390 encryptDwBroadcast OBJECT-TYPE 391 SYNTAX INTEGER { 392 disable(0), 393 enable(1)} 394 MAX-ACCESS read-write 395 STATUS current 396 DESCRIPTION 397 "To enable or disable Encrypted Downlink Broadcast. For FSK APs." 398 ::={whispApsConfig 36} 399 400 updateAppAddress OBJECT-TYPE 401 SYNTAX IpAddress 402 MAX-ACCESS read-write 403 STATUS current 404 DESCRIPTION 405 "Update Application Address." 406 ::={whispApsConfig 37} 407 408 dfsConfig OBJECT-TYPE 409 SYNTAX INTEGER { 410 disable(0), 411 enable(1)} 412 MAX-ACCESS read-write 413 STATUS obsolete 414 DESCRIPTION 415 "To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios." 416 ::={whispApsConfig 38} 417 418 vlanEnable OBJECT-TYPE 419 SYNTAX INTEGER { 420 disable(0), 421 enable(1)} 422 MAX-ACCESS read-write 423 STATUS current 424 DESCRIPTION 425 "To enable or disable VLAN." 426 ::={whispApsConfig 39} 427 428 configSource OBJECT-TYPE 429 SYNTAX INTEGER { 430 bam(0), 431 sm(1), 432 bamsm(2)} 433 MAX-ACCESS read-write 434 STATUS current 435 DESCRIPTION 436 "To configure CIR, MIR and VLAN through SM or BAM." 437 ::={whispApsConfig 40} 438 439 apRateAdapt OBJECT-TYPE 440 SYNTAX INTEGER { 441 onex(0), 442 onextwox(1), 443 onextwoxthreex(2)} 444 MAX-ACCESS read-write 445 STATUS obsolete 446 DESCRIPTION 447 "To enable or disable double rate." 448 ::={whispApsConfig 41} 449 450 numCtlSlotsHW OBJECT-TYPE 451 SYNTAX INTEGER 452 MAX-ACCESS read-write 453 STATUS deprecated 454 DESCRIPTION 455 "This attribute is deprecated. Please see radioControlSlots." 456 ::={whispApsConfig 42} 457 458 displayAPEval OBJECT-TYPE 459 SYNTAX INTEGER { 460 enable(0), 461 disable(1)} 462 MAX-ACCESS read-write 463 STATUS current 464 DESCRIPTION 465 "If enable, it allows display of AP Eval Data at the SM." 466 ::={whispApsConfig 43} 467 468 smIsolation OBJECT-TYPE 469 SYNTAX INTEGER { 470 smIsolationDisable(0), 471 smIsolationDrop(1), 472 smIsolationFwd(2)} 473 MAX-ACCESS read-write 474 STATUS current 475 DESCRIPTION 476 "(0) -- Disable SM Isolation. 477 (1) -- Enable SM Isolation by blocking SM destined packets. 478 (2) -- Enable SM Isolation by forwarding SM packets upstream." 479 ::={whispApsConfig 44} 480 481 ipAccessFilterEnable OBJECT-TYPE 482 SYNTAX INTEGER { 483 disable(0), 484 enable(1)} 485 MAX-ACCESS read-write 486 STATUS current 487 DESCRIPTION 488 "To enable or disable IP access filtering to Management functions. 489 (0) - IP access will be allowed from all addresses. 490 (1) - IP access will be controlled using allowedIPAccess1-3 entries." 491 ::={whispApsConfig 45} 492 493 allowedIPAccess1 OBJECT-TYPE 494 SYNTAX IpAddress 495 MAX-ACCESS read-write 496 STATUS current 497 DESCRIPTION 498 "Allow access to AP Management from this IP. 499 0 is default setting to allow from all IPs." 500 ::={whispApsConfig 46} 501 502 allowedIPAccess2 OBJECT-TYPE 503 SYNTAX IpAddress 504 MAX-ACCESS read-write 505 STATUS current 506 DESCRIPTION 507 "Allow access to AP Management from this IP. 508 0 is default setting to allow from all IPs." 509 ::={whispApsConfig 47} 510 511 allowedIPAccess3 OBJECT-TYPE 512 SYNTAX IpAddress 513 MAX-ACCESS read-write 514 STATUS current 515 DESCRIPTION 516 "Allow access to AP Management from this IP. 517 0 is default setting to allow from all IPs." 518 ::={whispApsConfig 48} 519 520 tslBridging OBJECT-TYPE 521 SYNTAX INTEGER { 522 disable(0), 523 enable(1)} 524 MAX-ACCESS read-write 525 STATUS current 526 DESCRIPTION 527 "1 = We are performing Translation Bridging 0 = We are not." 528 ::={whispApsConfig 49} 529 530 untranslatedArp OBJECT-TYPE 531 SYNTAX INTEGER { 532 disable(0), 533 enable(1)} 534 MAX-ACCESS read-write 535 STATUS current 536 DESCRIPTION 537 "1 = We are sending untranslated ARP response. 0 = We are not." 538 ::={whispApsConfig 50} 539 540 limitFreqBand900 OBJECT-TYPE 541 SYNTAX INTEGER { 542 disable(0), 543 enable(1)} 544 MAX-ACCESS read-write 545 STATUS current 546 DESCRIPTION 547 "1 = We are limiting the freq band of 900 radios. 0 = We are not." 548 ::={whispApsConfig 51} 549 550 txPwrLevel OBJECT-TYPE 551 SYNTAX INTEGER 552 MAX-ACCESS read-write 553 STATUS obsolete 554 DESCRIPTION 555 "Deprecated, use 'transmitterOP' instead." 556 ::={whispApsConfig 52} 557 558 rfFreqCaralt1 OBJECT-TYPE 559 SYNTAX INTEGER { 560 none(0)} 561 MAX-ACCESS read-write 562 STATUS current 563 DESCRIPTION 564 "First DFS Alternate RF Frequency. (Only available for DFS radios) Used 565 as a backup frequency when Radar is detected on DFS enabled Radios. 566 The frequencies are: 567 568 5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525, 569 5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595, 570 5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665, 571 5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only). 572 573 (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS) 574 575 5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805. 576 5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 577 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 578 0: None." 579 ::={whispApsConfig 53} 580 581 rfFreqCaralt2 OBJECT-TYPE 582 SYNTAX INTEGER { 583 none(0)} 584 MAX-ACCESS read-write 585 STATUS current 586 DESCRIPTION 587 "Second DFS Alternate RF Frequency. (Only available for DFS radios) Used 588 as a backup frequency when Radar is detected on DFS enabled Radios. 589 The frequencies are: 590 591 5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525, 592 5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595, 593 5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665, 594 5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only). 595 596 (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS) 597 598 5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805. 599 5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 600 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 601 0: None." 602 ::={whispApsConfig 54} 603 604 scheduleWhitening OBJECT-TYPE 605 SYNTAX INTEGER { 606 disable(0), 607 enable(1)} 608 MAX-ACCESS read-write 609 STATUS current 610 DESCRIPTION 611 "1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only" 612 ::={whispApsConfig 55} 613 614 remoteSpectrumAnalysisDuration OBJECT-TYPE 615 SYNTAX INTEGER (10..1000) 616 MAX-ACCESS read-write 617 STATUS current 618 DESCRIPTION 619 "Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds." 620 ::={whispApsConfig 56} 621 622-- Perform Remote Spectrum Analysis on an LUID 623 624 remoteSpectrumAnalyzerLUID OBJECT-TYPE 625 SYNTAX INTEGER (2..239) 626 MAX-ACCESS read-write 627 STATUS current 628 DESCRIPTION 629 "Get will always return 0. 630 Set will start Remote Spectrum Analyzer on specified LUID. 631 *Warning* This will cause the SM to disconnect from the AP! 632 You will lose the session for the specified duration! 633 If general error was returned then the LUID does not have an active session, or the 634 SM does not support Remote Spectrum Analysis." 635 ::={whispApsConfig 57} 636 637-- Allows BHS re-registration every 24 hours 638 639 bhReReg OBJECT-TYPE 640 SYNTAX INTEGER { 641 disabled(0), 642 enabled(1)} 643 MAX-ACCESS read-write 644 STATUS current 645 DESCRIPTION 646 "Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh." 647 ::={whispApsConfig 58} 648 649 dlnkBcastCIR OBJECT-TYPE 650 SYNTAX INTEGER 651 MAX-ACCESS read-write 652 STATUS current 653 DESCRIPTION 654 "Downlink Broadcast CIR (kbps)" 655 ::={whispApsConfig 59} 656 657 verifyGPSChecksum OBJECT-TYPE 658 SYNTAX INTEGER { 659 doNotVerifyGPSMessageChecksum(0), 660 verifyGPSMessageChecksum(1)} 661 MAX-ACCESS read-write 662 STATUS current 663 DESCRIPTION 664 "Enable/Disable verification of GPS message checksums." 665 ::={whispApsConfig 60} 666 667 apVlanOverride OBJECT-TYPE 668 SYNTAX INTEGER { 669 disable(0), 670 enable(1)} 671 MAX-ACCESS read-write 672 STATUS current 673 DESCRIPTION 674 "Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for 675 running spectrum analysis on the AP. Since doing that requires the AP to be turned into an SM, enabling this option will 676 allow you to keep the AP's VLAN configuration in place while the AP is running as an SM." 677 ::={whispApsConfig 61} 678 679 dhcpRelayAgentEnable OBJECT-TYPE 680 SYNTAX INTEGER { 681 disable(0), 682 fullRelay(1), 683 option82Only(2)} 684 MAX-ACCESS read-write 685 STATUS current 686 DESCRIPTION 687 "Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it. 688 (0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally 689 (1) - Relay Agent enabled - AP will intercept DHCP DISCOVER message from SM and CPE, insert Option 82 containing SM's MAC address, and forward request to specified DHCP server." 690 ::={whispApsConfig 62} 691 692 dhcpRelayAgentSrvrIP OBJECT-TYPE 693 SYNTAX IpAddress 694 MAX-ACCESS read-write 695 STATUS obsolete 696 DESCRIPTION 697 "Obsoleted. Configure with whispApsDNS.dhcprServer." 698 ::={whispApsConfig 63} 699 700 colorCodeRescanTimer OBJECT-TYPE 701 SYNTAX INTEGER (0..43200) 702 MAX-ACCESS read-write 703 STATUS current 704 DESCRIPTION 705 "Time in minutes for the subscriber to begin the idle timer. This timer 706 will begin as soon as a session is started. 707 This only fires if the device is in session with a non-primary color code. 708 A value of zero (0) disables this timer 709 (MultiPoint system Only)" 710 ::={whispApsConfig 64} 711 712 colorCodeRescanIdleTimer OBJECT-TYPE 713 SYNTAX INTEGER (0..60) 714 MAX-ACCESS read-write 715 STATUS current 716 DESCRIPTION 717 "Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle), 718 then the subscriber will begin to rescan. 719 This timer will wait until the timer set in colorCodeRescanTimer has expired before beginning. 720 This timer only fires if the device is in session with a non-primary color code. 721 A value of zero (0) mean to rescan without waiting for idle. 722 (MultiPoint system Only)" 723 ::={whispApsConfig 65} 724 725 authKeyOptionAP OBJECT-TYPE 726 SYNTAX INTEGER { 727 useDefault(0), 728 useKeySet(1)} 729 MAX-ACCESS read-write 730 STATUS current 731 DESCRIPTION 732 "This option is for Multipoint APs only. This option will only be used if Authentication Mode is set 733 to AP Pre-Shared Key. 734 0 - Use default key. 735 1 - Use set key." 736 ::={whispApsConfig 66} 737 738 asIP4 OBJECT-TYPE 739 SYNTAX IpAddress 740 MAX-ACCESS read-write 741 STATUS obsolete 742 DESCRIPTION 743 "Obsoleted. Configure with whispApsDNS.authServer4." 744 ::={whispApsConfig 67} 745 746 asIP5 OBJECT-TYPE 747 SYNTAX IpAddress 748 MAX-ACCESS read-write 749 STATUS obsolete 750 DESCRIPTION 751 "Obsoleted. Configure with whispApsDNS.authServer5." 752 ::={whispApsConfig 68} 753 754 onlyAllowVer95OrAbove OBJECT-TYPE 755 SYNTAX INTEGER { 756 onlyAllowVer95OrAboveDisabled(0), 757 onlyAllowVer95OrAboveEnabled(1)} 758 MAX-ACCESS read-write 759 STATUS current 760 DESCRIPTION 761 "Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be 762 allowed to register." 763 ::={whispApsConfig 69} 764 765 apRxDelay OBJECT-TYPE 766 SYNTAX INTEGER 767 MAX-ACCESS read-write 768 STATUS current 769 DESCRIPTION 770 "This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB." 771 ::={whispApsConfig 70} 772 773 qinqEthType OBJECT-TYPE 774 SYNTAX INTEGER { 775 x88a8(0), 776 x8100(1), 777 x9100(2), 778 x9200(3), 779 x9300(4)} 780 MAX-ACCESS read-write 781 STATUS current 782 DESCRIPTION 783 "EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default." 784 ::={whispApsConfig 71} 785 786 sMTxPowerControl OBJECT-TYPE 787 SYNTAX INTEGER { 788 disable(0), 789 enable(1)} 790 MAX-ACCESS read-write 791 STATUS current 792 DESCRIPTION 793 "Enable/Disable AP control of SM TX power. 794 Engineering use only." 795 ::={whispApsConfig 72} 796 797 fskSMRcvTargetLvl OBJECT-TYPE 798 SYNTAX INTEGER (-80..-40) 799 UNITS "dBm" 800 MAX-ACCESS read-write 801 STATUS obsolete 802 DESCRIPTION 803 "Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). 804 FSK only." 805 ::={whispApsConfig 73} 806 807 authSharedSecret1 OBJECT-TYPE 808 SYNTAX DisplayString 809 MAX-ACCESS read-write 810 STATUS current 811 DESCRIPTION 812 "Authentication Server 1 Shared Secret." 813 ::={whispApsConfig 74} 814 815 authSharedSecret2 OBJECT-TYPE 816 SYNTAX DisplayString 817 MAX-ACCESS read-write 818 STATUS current 819 DESCRIPTION 820 "Authentication Server 2 Shared Secret." 821 ::={whispApsConfig 75} 822 823 authSharedSecret3 OBJECT-TYPE 824 SYNTAX DisplayString 825 MAX-ACCESS read-write 826 STATUS current 827 DESCRIPTION 828 "Authentication Server 3 Shared Secret." 829 ::={whispApsConfig 76} 830 831 whispUsrAuthSharedSecret1 OBJECT-TYPE 832 SYNTAX DisplayString 833 MAX-ACCESS read-write 834 STATUS obsolete 835 DESCRIPTION 836 "Obsoleted. Use whispApsConfig.authSharedSecret1." 837 ::={whispApsConfig 79} 838 839 whispUsrAuthSharedSecret2 OBJECT-TYPE 840 SYNTAX DisplayString 841 MAX-ACCESS read-write 842 STATUS obsolete 843 DESCRIPTION 844 "Obsoleted. Use whispApsConfig.authSharedSecret2." 845 ::={whispApsConfig 80} 846 847 whispUsrAuthSharedSecret3 OBJECT-TYPE 848 SYNTAX DisplayString 849 MAX-ACCESS read-write 850 STATUS obsolete 851 DESCRIPTION 852 "Obsoleted. Use whispApsConfig.authSharedSecret3." 853 ::={whispApsConfig 81} 854 855 whispUsrAcctSvr1 OBJECT-TYPE 856 SYNTAX DisplayString 857 MAX-ACCESS read-write 858 STATUS obsolete 859 DESCRIPTION 860 "Obsoleted. Use whispApsDNS.authServer1." 861 ::={whispApsConfig 82} 862 863 whispUsrAcctSvr2 OBJECT-TYPE 864 SYNTAX DisplayString 865 MAX-ACCESS read-write 866 STATUS obsolete 867 DESCRIPTION 868 "Obsoleted. Use whispApsDNS.authServer2." 869 ::={whispApsConfig 83} 870 871 whispUsrAcctSvr3 OBJECT-TYPE 872 SYNTAX DisplayString 873 MAX-ACCESS read-write 874 STATUS obsolete 875 DESCRIPTION 876 "Obsoleted. Use whispApsDNS.authServer3." 877 ::={whispApsConfig 84} 878 879 whispUsrAuthPhase1 OBJECT-TYPE 880 SYNTAX INTEGER { 881 md5(0)} 882 MAX-ACCESS read-write 883 STATUS deprecated 884 DESCRIPTION 885 "Select method for User Authentication. This is deprecated. 886 Please use whispUsrAuth." 887 ::={whispApsConfig 85} 888 889 whispWebUseAuthServer OBJECT-TYPE 890 SYNTAX INTEGER { 891 useRADIUSAccountingSvr(0), 892 useRADIUSAuthenticationSvr(1)} 893 MAX-ACCESS read-write 894 STATUS obsolete 895 DESCRIPTION 896 "Obsoleted. Use whispApsDNS.authServer[1-3]." 897 ::={whispApsConfig 86} 898 899 dropSession OBJECT-TYPE 900 SYNTAX MacAddress 901 MAX-ACCESS read-write 902 STATUS current 903 DESCRIPTION 904 "SM/BHS MAC Address to drop session from the AP/BHM." 905 ::={whispApsConfig 87} 906 907 uGPSPower OBJECT-TYPE 908 SYNTAX INTEGER { 909 off(0), 910 on(1)} 911 MAX-ACCESS read-write 912 STATUS current 913 DESCRIPTION 914 "Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set)." 915 ::={whispApsConfig 88} 916 917 timeZone OBJECT-TYPE 918 SYNTAX INTEGER (0..124) 919 MAX-ACCESS read-write 920 STATUS current 921 DESCRIPTION 922 "Set the timezone offset for the radio. This change takes affect dynamically. 923 The available timezones are: 924 0 : (UTC) UTC - Coordinated Universal Time 925 1 : (UTC) GMT - Greenwich Mean Time 926 2 : (UTC) WET - Western European Time 927 3 : (UTC-12) BIT - Baker Island Time 928 4 : (UTC-11) SST - Samoa Standard Time 929 5 : (UTC-10) CKT - Cook Island Time 930 6 : (UTC-10) HAST - Hawaii-Aleutian Standard Time 931 7 : (UTC-10) HST - Hawaii Standard Time 932 8 : (UTC-10) TAHT - Tahiti Time 933 9 : (UTC-09:30) MIT - Marquesas Islands Time 934 10 : (UTC-09) AKST - Alaska Standard Time 935 11 : (UTC-09) GIT - Gambier Island Time 936 12 : (UTC-09) HADT - Hawaii-Aleutian Daylight Time 937 13 : (UTC-08) AKDT - Alaska Daylight Time 938 14 : (UTC-08) CIST - Clipperton Island Standard Time 939 15 : (UTC-08) PST - Pacific Standard Time (North America) 940 16 : (UTC-07) MST - Mountain Standard Time (North America) 941 17 : (UTC-07) PDT - Pacific Daylight Time (North America) 942 18 : (UTC-06) CST - Central Standard Time (North America) 943 19 : (UTC-06) EAST - Easter Island Standard Time 944 20 : (UTC-06) GALT - Galapagos Time 945 21 : (UTC-06) MDT - Mountain Daylight Time (North America) 946 22 : (UTC-05) CDT - Central Daylight Time (North America) 947 23 : (UTC-05) COT - Colombia Time 948 24 : (UTC-05) ECT - Ecuador Time 949 25 : (UTC-05) EST - Eastern Standard Time (North America) 950 26 : (UTC-04:30) VET - Venezuelan Standard Time 951 27 : (UTC-04) AST - Atlantic Standard Time 952 28 : (UTC-04) BOT - Bolivia Time 953 29 : (UTC-04) CLT - Chile Standard Time 954 30 : (UTC-04) COST - Colombia Summer Time 955 31 : (UTC-04) ECT - Eastern Caribbean Time (does not recognise DST) 956 32 : (UTC-04) EDT - Eastern Daylight Time (North America) 957 33 : (UTC-04) FKT - Falkland Islands Time 958 34 : (UTC-04) GYT - Guyana Time 959 35 : (UTC-03:30) NST - Newfoundland Standard Time 960 36 : (UTC-03:30) NT - Newfoundland Time 961 37 : (UTC-03) ADT - Atlantic Daylight Time 962 38 : (UTC-03) ART - Argentina Time 963 39 : (UTC-03) BRT - Brasilia Time 964 40 : (UTC-03) CLST - Chile Summer Time 965 41 : (UTC-03) FKST - Falkland Islands Summer Time 966 42 : (UTC-03) GFT - French Guiana Time 967 43 : (UTC-03) UYT - Uruguay Standard Time 968 44 : (UTC-02:30) NDT - Newfoundland Daylight Time 969 45 : (UTC-02) GST - South Georgia and the South Sandwich Islands 970 46 : (UTC-02) UYST - Uruguay Summer Time 971 47 : (UTC-01) AZOST - Azores Standard Time 972 48 : (UTC-01) CVT - Cape Verde Time 973 49 : (UTC+01) BST - British Summer Time (British Standard Time from Feb 1968 to Oct 1971) 974 50 : (UTC+01) CET - Central European Time 975 51 : (UTC+01) DFT - AIX specific equivalent of Central European Time 976 52 : (UTC+01) IST - Irish Summer Time 977 53 : (UTC+01) WAT - West Africa Time 978 54 : (UTC+01) WEDT - Western European Daylight Time 979 55 : (UTC+01) WEST - Western European Summer Time 980 56 : (UTC+02) CAT - Central Africa Time 981 57 : (UTC+02) CEDT - Central European Daylight Time 982 58 : (UTC+02) CEST - Central European Summer Time 983 59 : (UTC+02) EET - Eastern European Time 984 60 : (UTC+02) IST - Israel Standard Time 985 61 : (UTC+02) SAST - South African Standard Time 986 62 : (UTC+03) AST - Arab Standard Time (Kuwait, Riyadh) 987 63 : (UTC+03) AST - Arabic Standard Time (Baghdad) 988 64 : (UTC+03) EAT - East Africa Time 989 65 : (UTC+03) EEDT - Eastern European Daylight Time 990 66 : (UTC+03) EEST - Eastern European Summer Time 991 67 : (UTC+03) MSK - Moscow Standard Time 992 68 : (UTC+03:30) IRST - Iran Standard Time 993 69 : (UTC+04) AMT - Armenia Time 994 70 : (UTC+04) AST - Arabian Standard Time (Abu Dhabi, Muscat) 995 71 : (UTC+04) AZT - Azerbaijan Time 996 72 : (UTC+04) GET - Georgia Standard Time 997 73 : (UTC+04) MSD - Moscow Summer Time 998 74 : (UTC+04) MUT - Mauritius Time 999 75 : (UTC+04) RET - Reunion Time 1000 76 : (UTC+04) SAMT - Samara Time 1001 77 : (UTC+04) SCT - Seychelles Time 1002 78 : (UTC+04:30) AFT - Afghanistan Time 1003 79 : (UTC+05) AMST - Armenia Summer Time 1004 80 : (UTC+05) HMT - Heard and McDonald Islands Time 1005 81 : (UTC+05) PKT - Pakistan Standard Time 1006 82 : (UTC+05) YEKT - Yekaterinburg Time 1007 83 : (UTC+05:30) IST - Indian Standard Time 1008 84 : (UTC+05:30) SLT - Sri Lanka Time 1009 85 : (UTC+05:45) NPT - Nepal Time 1010 86 : (UTC+06) BIOT - British Indian Ocean Time 1011 87 : (UTC+06) BST - Bangladesh Standard Time 1012 88 : (UTC+06) BTT - Bhutan Time 1013 89 : (UTC+06) OMST - Omsk Time 1014 90 : (UTC+06:30) CCT - Cocos Islands Time 1015 91 : (UTC+06:30) MST - Myanmar Standard Time 1016 92 : (UTC+07) CXT - Christmas Island Time 1017 93 : (UTC+07) ICT - Indochina Time 1018 94 : (UTC+07) KRAT - Krasnoyarsk Time 1019 95 : (UTC+07) THA - Thailand Standard Time 1020 96 : (UTC+08) ACT - ASEAN Common Time 1021 97 : (UTC+08) AWST - Australian Western Standard Time 1022 98 : (UTC+08) BDT - Brunei Time 1023 99 : (UTC+08) CST - China Standard Time 1024 100 : (UTC+08) HKT - Hong Kong Time 1025 101 : (UTC+08) IRKT - Irkutsk Time 1026 102 : (UTC+08) MST - Malaysian Standard Time 1027 103 : (UTC+08) PST - Philippine Standard Time 1028 104 : (UTC+08) SST - Singapore Standard Time 1029 105 : (UTC+09) AWDT - Australian Western Daylight Time 1030 106 : (UTC+09) JST - Japan Standard Time 1031 107 : (UTC+09) KST - Korea Standard Time 1032 108 : (UTC+09) YAKT - Yakutsk Time 1033 109 : (UTC+09:30) ACST - Australian Central Standard Time 1034 110 : (UTC+10) AEST - Australian Eastern Standard Time 1035 111 : (UTC+10) ChST - Chamorro Standard Time 1036 112 : (UTC+10) VLAT - Vladivostok Time 1037 113 : (UTC+10:30) ACDT - Australian Central Daylight Time 1038 114 : (UTC+10:30) LHST - Lord Howe Standard Time 1039 115 : (UTC+11) AEDT - Australian Eastern Daylight Time 1040 116 : (UTC+11) MAGT - Magadan Time 1041 117 : (UTC+11) SBT - Solomon Islands Time 1042 118 : (UTC+11:30) NFT - Norfolk Time[1] 1043 119 : (UTC+12) FJT - Fiji Time 1044 120 : (UTC+12) GILT - Gilbert Island Time 1045 121 : (UTC+12) PETT - Kamchatka Time 1046 122 : (UTC+12:45) CHAST - Chatham Standard Time 1047 123 : (UTC+13) PHOT - Phoenix Island Time 1048 124 : (UTC+14) LINT - Line Islands Time" 1049 ::={whispApsConfig 89} 1050 1051 ofdmSMRcvTargetLvl OBJECT-TYPE 1052 SYNTAX INTEGER (-80..-40) 1053 UNITS "dBm" 1054 MAX-ACCESS read-write 1055 STATUS current 1056 DESCRIPTION 1057 "Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value." 1058 ::={whispApsConfig 90} 1059 1060 radiusPort OBJECT-TYPE 1061 SYNTAX INTEGER 1062 MAX-ACCESS read-write 1063 STATUS current 1064 DESCRIPTION 1065 "Port used to connect to the RADIUS server. Default is 1812." 1066 ::={whispApsConfig 91} 1067 1068 radiusAcctPort OBJECT-TYPE 1069 SYNTAX INTEGER 1070 MAX-ACCESS read-write 1071 STATUS current 1072 DESCRIPTION 1073 "Port used to for RADIUS Accounting. Default is 1813." 1074 ::={whispApsConfig 92} 1075 1076 lastSesStatsReset OBJECT-TYPE 1077 SYNTAX DisplayString 1078 MAX-ACCESS read-only 1079 STATUS current 1080 DESCRIPTION 1081 "Displays the timestamp of last reset of session stats or None otherwise." 1082 ::={whispApsConfig 93} 1083 1084 resetSesStats OBJECT-TYPE 1085 SYNTAX INTEGER { 1086 noReset(0), 1087 reset(1)} 1088 MAX-ACCESS read-write 1089 STATUS current 1090 DESCRIPTION 1091 "Resets the session stats if true." 1092 ::={whispApsConfig 94} 1093 1094 rfOLTrap OBJECT-TYPE 1095 SYNTAX INTEGER { 1096 enable(1), 1097 disable(0)} 1098 MAX-ACCESS read-write 1099 STATUS current 1100 DESCRIPTION 1101 "Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level." 1102 ::={whispApsConfig 95} 1103 1104 rfOLThreshold OBJECT-TYPE 1105 SYNTAX INTEGER (1..100) 1106 UNITS "%" 1107 MAX-ACCESS read-write 1108 STATUS current 1109 DESCRIPTION 1110 "Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager." 1111 ::={whispApsConfig 96} 1112 1113 rfOLEnable OBJECT-TYPE 1114 SYNTAX INTEGER { 1115 enable(1), 1116 disable(0)} 1117 MAX-ACCESS read-write 1118 STATUS current 1119 DESCRIPTION 1120 "Enable/Disable Throughput RF Overload Monitoring monitoring." 1121 ::={whispApsConfig 97} 1122 1123 actionListFilename OBJECT-TYPE 1124 SYNTAX DisplayString 1125 MAX-ACCESS read-write 1126 STATUS current 1127 DESCRIPTION 1128 "Name of the file that contains the Action List for Auto update commands from CNUT" 1129 ::={whispApsConfig 98} 1130 1131 enableAutoupdate OBJECT-TYPE 1132 SYNTAX INTEGER { 1133 disable(0), 1134 enable(1)} 1135 MAX-ACCESS read-write 1136 STATUS current 1137 DESCRIPTION 1138 "Enables/Disables auto-update of the SM's under an AP" 1139 ::={whispApsConfig 99} 1140 1141 accountingSmReAuthInterval OBJECT-TYPE 1142 SYNTAX INTEGER 1143 MAX-ACCESS read-write 1144 STATUS current 1145 DESCRIPTION 1146 "Select Interval for Reauthentication of SM" 1147 ::={whispApsConfig 100} 1148 1149 syslogDomainNameAppend OBJECT-TYPE 1150 SYNTAX INTEGER { 1151 disableDomain(0), 1152 appendDomain(1)} 1153 MAX-ACCESS read-write 1154 STATUS deprecated 1155 DESCRIPTION 1156 "This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup" 1157 ::={whispApsConfig 101} 1158 1159 syslogServerAddr OBJECT-TYPE 1160 SYNTAX DisplayString 1161 MAX-ACCESS read-write 1162 STATUS deprecated 1163 DESCRIPTION 1164 "This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup" 1165 ::={whispApsConfig 102} 1166 1167 syslogServerPort OBJECT-TYPE 1168 SYNTAX INTEGER 1169 MAX-ACCESS read-write 1170 STATUS current 1171 DESCRIPTION 1172 "This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup" 1173 ::={whispApsConfig 103} 1174 1175 syslogXmitAP OBJECT-TYPE 1176 SYNTAX INTEGER { 1177 disable(0), 1178 enable(1)} 1179 MAX-ACCESS read-write 1180 STATUS current 1181 DESCRIPTION 1182 "Enables/Disables transmission of Syslogs from AP/BHM" 1183 ::={whispApsConfig 104} 1184 1185 syslogXmitSMs OBJECT-TYPE 1186 SYNTAX INTEGER { 1187 disable(0), 1188 enable(1)} 1189 MAX-ACCESS read-write 1190 STATUS current 1191 DESCRIPTION 1192 "Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS." 1193 ::={whispApsConfig 105} 1194 1195 accountingInterimUpdateInterval OBJECT-TYPE 1196 SYNTAX INTEGER 1197 MAX-ACCESS read-write 1198 STATUS current 1199 DESCRIPTION 1200 "Select Interval for Interim Updates" 1201 ::={whispApsConfig 106} 1202 1203 gpsOutputEn OBJECT-TYPE 1204 SYNTAX INTEGER { 1205 off(0), 1206 on(1)} 1207 MAX-ACCESS read-write 1208 STATUS current 1209 DESCRIPTION 1210 "Enable or Disable GPS sync output enable." 1211 ::={whispApsConfig 107} 1212 1213 removeIdleSMs OBJECT-TYPE 1214 SYNTAX INTEGER { 1215 stopped(0), 1216 start(1)} 1217 MAX-ACCESS read-write 1218 STATUS current 1219 DESCRIPTION 1220 "Setting this to a value 1 will remove all SMs which are in Idle state from AP's Session list." 1221 ::={whispApsConfig 108} 1222 1223 lastTimeIdleSMsRemoved OBJECT-TYPE 1224 SYNTAX DisplayString 1225 MAX-ACCESS read-only 1226 STATUS current 1227 DESCRIPTION 1228 "Displays the timestamp of last removal of Idle SMs from AP's Session list" 1229 ::={whispApsConfig 109} 1230 1231 userAuthSharedSecret1 OBJECT-TYPE 1232 SYNTAX DisplayString 1233 MAX-ACCESS read-write 1234 STATUS current 1235 DESCRIPTION 1236 "User Authentication Server 1 Shared Secret." 1237 ::={whispApsConfig 110} 1238 1239 userAuthSharedSecret2 OBJECT-TYPE 1240 SYNTAX DisplayString 1241 MAX-ACCESS read-write 1242 STATUS current 1243 DESCRIPTION 1244 "User Authentication Server 2 Shared Secret." 1245 ::={whispApsConfig 111} 1246 1247 userAuthSharedSecret3 OBJECT-TYPE 1248 SYNTAX DisplayString 1249 MAX-ACCESS read-write 1250 STATUS current 1251 DESCRIPTION 1252 "User Authentication Server 3 Shared Secret." 1253 ::={whispApsConfig 112} 1254 1255 trapDelayAfterBootup OBJECT-TYPE 1256 SYNTAX INTEGER (0..120) 1257 UNITS "seconds" 1258 MAX-ACCESS read-write 1259 STATUS current 1260 DESCRIPTION 1261 "Delays sending of SNMP traps after radio boots up for this many number of seconds." 1262 ::={whispApsConfig 113} 1263 1264 radioMode OBJECT-TYPE 1265 SYNTAX INTEGER { 1266 mimoOnly(2)} 1267 MAX-ACCESS read-write 1268 STATUS obsolete 1269 DESCRIPTION 1270 "This OID is obsolete." 1271 ::={whispApsConfig 206} 1272 1273 rfTelnetAccess OBJECT-TYPE 1274 SYNTAX INTEGER { 1275 disable(0), 1276 enable(1)} 1277 MAX-ACCESS read-write 1278 STATUS current 1279 DESCRIPTION 1280 "Allows/prohibits uplink Telnet access (SM->AP)." 1281 ::={whispApsConfig 207} 1282 1283 upLnkMaxBurstDataRate OBJECT-TYPE 1284 SYNTAX INTEGER 1285 UNITS "Kilobits/sec" 1286 MAX-ACCESS read-write 1287 STATUS current 1288 DESCRIPTION 1289 "Maximum burst uplink rate." 1290 ::={whispApsConfig 208} 1291 1292 dwnLnkMaxBurstDataRate OBJECT-TYPE 1293 SYNTAX INTEGER 1294 UNITS "Kilobits/sec" 1295 MAX-ACCESS read-write 1296 STATUS current 1297 DESCRIPTION 1298 "Maximum burst downlink rate." 1299 ::={whispApsConfig 209} 1300 1301 rfPPPoEPADIForwarding OBJECT-TYPE 1302 SYNTAX INTEGER { 1303 disable(0), 1304 enable(1)} 1305 MAX-ACCESS read-write 1306 STATUS current 1307 DESCRIPTION 1308 "Enables/disables forwarding of PPPoE PADI packets from AP to SM." 1309 ::={whispApsConfig 210} 1310 1311 allowedIPAccessNMLength1 OBJECT-TYPE 1312 SYNTAX INTEGER (1..32) 1313 MAX-ACCESS read-write 1314 STATUS current 1315 DESCRIPTION 1316 "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" 1317 ::={whispApsConfig 211} 1318 1319 allowedIPAccessNMLength2 OBJECT-TYPE 1320 SYNTAX INTEGER (1..32) 1321 MAX-ACCESS read-write 1322 STATUS current 1323 DESCRIPTION 1324 "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" 1325 ::={whispApsConfig 212} 1326 1327 allowedIPAccessNMLength3 OBJECT-TYPE 1328 SYNTAX INTEGER (1..32) 1329 MAX-ACCESS read-write 1330 STATUS current 1331 DESCRIPTION 1332 "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" 1333 ::={whispApsConfig 213} 1334 1335 bridgeFloodUnknownsEnable OBJECT-TYPE 1336 SYNTAX INTEGER { 1337 disable(0), 1338 enable(1)} 1339 MAX-ACCESS read-write 1340 STATUS current 1341 DESCRIPTION 1342 "Forward unicast packets with an unknown address to all SMs. This can significantly reduce downlink throughput. 1343 (0) - Drop unknown unicast packets. 1344 (1) - Forward unknown unicast packets to all SMs." 1345 ::={whispApsConfig 214} 1346 1347 berModSelect OBJECT-TYPE 1348 SYNTAX INTEGER { 1349 qpsk(0), 1350 qam-16(1), 1351 qam-64(2), 1352 qam-256(3)} 1353 MAX-ACCESS read-write 1354 STATUS current 1355 DESCRIPTION 1356 "The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM." 1357 ::={whispApsConfig 215} 1358 1359 remoteSpectrumAnalyzerScanBandwidth OBJECT-TYPE 1360 SYNTAX INTEGER { 1361 bandwidth5MHz(0), 1362 bandwidth10MHz(1), 1363 bandwidth15MHz(3), 1364 bandwidth20MHz(2), 1365 bandwidth30MHz(4)} 1366 MAX-ACCESS read-write 1367 STATUS current 1368 DESCRIPTION 1369 "Scanning Bandwidth used for the Remote Spectrum Analyzer. Only available on PMP 450." 1370 ::={whispApsConfig 216} 1371 1372 multicastVCDataRate OBJECT-TYPE 1373 SYNTAX INTEGER { 1374 disable(0), 1375 rate2XmimoB(5), 1376 rate4XmimoB(7), 1377 rate6XmimoB(8), 1378 rate8XmimoB(9), 1379 rate1XmimoA(4), 1380 rate2XmimoA(10), 1381 rate4XmimoA(11), 1382 rate6XmimoA(12)} 1383 MAX-ACCESS read-write 1384 STATUS current 1385 DESCRIPTION 1386 "Enables and selects the data rate of the Multicast VC. 1387 If disabled, multicast messages are sent using the broadcast VC. 1388 This VC does not automatically rate adapt. 1389 Note: SMs that cannot receive at the selected rate will receive no multicast messages." 1390 ::={whispApsConfig 217} 1391 1392 dlnkMcastCIR OBJECT-TYPE 1393 SYNTAX INTEGER 1394 MAX-ACCESS read-write 1395 STATUS current 1396 DESCRIPTION 1397 "Downlink Multicast CIR (kbps)" 1398 ::={whispApsConfig 218} 1399 1400 multicastRetryCount OBJECT-TYPE 1401 SYNTAX INTEGER 1402 MAX-ACCESS read-write 1403 STATUS current 1404 DESCRIPTION 1405 "Multicast Repeat Count : Range 0 - 2. For APs." 1406 ::={whispApsConfig 219} 1407 1408 apConfigAdjacentChanSupport OBJECT-TYPE 1409 SYNTAX INTEGER { 1410 disable(0), 1411 enable(1)} 1412 MAX-ACCESS read-write 1413 STATUS current 1414 DESCRIPTION 1415 "Used to enable or disable adjacent channel support. 1416 This could be needed when there is no guard band between co-located APs. 1417 Only available for APs in 3 GHz, 4.9 GHz and all 5 GHz frequency bands. 1418 For 3 GHz, this caps SMs to max transmit power of 23 dBm. 1419 When disabled, allows 3 GHz SMs to max out transmit power at 25 dBm. 1420 For 4.9-5.9 GHz, this caps 450b SMs to max transmit power of 25 dBm. 1421 When disabled, allows 4.9-5.9 GHz 450b SMs to max out transmit power at 27 dBm." 1422 ::={whispApsConfig 220} 1423 1424 pmp430InteropMode OBJECT-TYPE 1425 SYNTAX INTEGER { 1426 mimoa(0), 1427 siso(1)} 1428 MAX-ACCESS read-write 1429 STATUS current 1430 DESCRIPTION 1431 "When the AP talks to a PMP 430 it can do so in either MIMO-A or SISO mode. 1432 0 = MIMO-A 1433 1 = SISO 1434 Only applies to PMP 450 AP at 5 GHz. 1435 By default in 13.2 the AP talks in MIMO-A to PMP 430 SISO SMs. 1436 Setting this to a 1 will enable SISO mode to PMP 430 SISO SMs, as it was in 13.1.3 and before." 1437 ::={whispApsConfig 221} 1438 1439 framePeriod OBJECT-TYPE 1440 SYNTAX INTEGER { 1441 twoPointFiveMs(0), 1442 fiveMs(1)} 1443 MAX-ACCESS read-write 1444 STATUS current 1445 DESCRIPTION 1446 "Changes frame period to 2.5 ms or 5ms. 1447 Note: If set to 5 ms, only SM/BHS from 13.3 and onward will be able to register. 1448 Only on PMP and PTP 450. 1449 Not available in all regions." 1450 ::={whispApsConfig 223} 1451 1452 enableRadiusDynAuth OBJECT-TYPE 1453 SYNTAX INTEGER { 1454 disableDynAuth(0), 1455 enableDynAuth(1)} 1456 MAX-ACCESS read-write 1457 STATUS current 1458 DESCRIPTION 1459 "This option can be used to enable Radius Dynamic Authorization Extensions.Both CoA, which change the SM config parameters from the Radius server while an SM is already in session and Disconnect Message are supported. 1460 This option will only be used if Authentication mode is set to Radius AAA. 1461 0 - Disable Radius Dynamic Authorization Extension. 1462 1 - Enable Radius Dynamic Authorization Extension." 1463 ::={whispApsConfig 224} 1464 1465 pmp430SMRegistration OBJECT-TYPE 1466 SYNTAX INTEGER { 1467 deny(0), 1468 allow(1)} 1469 MAX-ACCESS read-write 1470 STATUS current 1471 DESCRIPTION 1472 "Option to allow/disallow PMP 430 SMs to register to this AP. 1473 When disabled PMP 430 SMs registrations will be rejected." 1474 ::={whispApsConfig 225} 1475 1476 disableAuthForICCSM OBJECT-TYPE 1477 SYNTAX INTEGER { 1478 disabled(0), 1479 enabled(1)} 1480 MAX-ACCESS read-write 1481 STATUS current 1482 DESCRIPTION 1483 "Bypass Authentication for ICC SMs" 1484 ::={whispApsConfig 226} 1485 1486 onlyAllowPMP450iSMRegistration OBJECT-TYPE 1487 SYNTAX INTEGER { 1488 only450i(0), 1489 all(1)} 1490 MAX-ACCESS read-write 1491 STATUS current 1492 DESCRIPTION 1493 "Option to limit SM registration to only allow PMP 450i devices or allow all devices (450i/450/430) to register. 1494 PMP 430 SM registration can be further limited by the pmp430SMRegistration OID if desired. 1495 Setting this to only450i will force an Auth Fail registration failure when a PMP 450 or PMP 430 SM device 1496 tries to register. 1497 This option only applies to PMP 450i AP devices." 1498 ::={whispApsConfig 228} 1499 1500 pmp450430LegacyMode OBJECT-TYPE 1501 SYNTAX INTEGER { 1502 disabled(0), 1503 enabled(1)} 1504 MAX-ACCESS read-write 1505 STATUS current 1506 DESCRIPTION 1507 "Option to put the PMP 450b/450i/450m into a Legacy mode for communicating with PMP 450 SMs running SW older than 13.3 and PMP 430 SMs running SW older than 13.4.1. 1508 Enabling this option will have an impact on sector throughput performance so should only be enabled to allow upgrading of the mixed sector. 1509 450m will operate in SU-MIMO Mode." 1510 ::={whispApsConfig 229} 1511 1512 pagerRejectFilterSelect OBJECT-TYPE 1513 SYNTAX INTEGER { 1514 enable(1), 1515 disable(0)} 1516 MAX-ACCESS read-write 1517 STATUS current 1518 DESCRIPTION 1519 "Enable or disable the Pager filter which can filter out Pager signals interfering in the 900 MHz band. 1520 NOTE: Frequencies 920 MHz and above will not work when enabled. 1521 Only applicable to 900 MHz devices." 1522 ::={whispApsConfig 230} 1523 1524 freeRunGPSSyncBypass OBJECT-TYPE 1525 SYNTAX INTEGER { 1526 disabled(0), 1527 enabled(1)} 1528 MAX-ACCESS read-write 1529 STATUS current 1530 DESCRIPTION 1531 "Enable to allow Free Run to begin immediately after radio bootup. Normally, Free Run is only allowed 1532 after GPS sync has been established at least once, then lost." 1533 ::={whispApsConfig 231} 1534 1535 useAPManagementVIDForICCSM OBJECT-TYPE 1536 SYNTAX INTEGER { 1537 disable(0), 1538 enable(1)} 1539 MAX-ACCESS read-write 1540 STATUS current 1541 DESCRIPTION 1542 "When enabled, SM connected via ICC uses APs MVID instead of its own." 1543 ::={whispApsConfig 232} 1544 1545 frameAlignmentLegacyMode OBJECT-TYPE 1546 SYNTAX INTEGER { 1547 off(0), 1548 mode1(1), 1549 mode2(2)} 1550 MAX-ACCESS read-write 1551 STATUS current 1552 DESCRIPTION 1553 "Option to adjust the frame alignment for compatibility with different GPS sync sources and software versions. 1554 Please see user guide for more information. 1555 Not applicable to 3 GHz radios running with 5ms frame, nor PMP 450m." 1556 ::={whispApsConfig 233} 1557 1558 noRebootFreqChange OBJECT-TYPE 1559 SYNTAX INTEGER { 1560 default(0), 1561 noreboot(1)} 1562 MAX-ACCESS read-write 1563 STATUS current 1564 DESCRIPTION 1565 "Enable/Disable option to change frequency without rebooting. 1566 Engineering use only." 1567 ::={whispApsConfig 234} 1568 1569 mumimoTrialMode OBJECT-TYPE 1570 SYNTAX INTEGER { 1571 enable(1), 1572 disable(0)} 1573 MAX-ACCESS read-write 1574 STATUS current 1575 DESCRIPTION 1576 "Enable MU-MIMO, Trial Mode units will decrement until units are exhausted or Trial Mode is disabled. 1577 Disable MU-MIMO, radio is still functional with SU-MIMO operation. Trial Mode units will not decrement. 1578 450m only." 1579 ::={whispApsConfig 236} 1580 1581 prioritizeMgmtData OBJECT-TYPE 1582 SYNTAX INTEGER { 1583 low(0), 1584 high(1)} 1585 MAX-ACCESS read-write 1586 STATUS current 1587 DESCRIPTION 1588 "0 - Management data will use low priority VC. 1589 1 - If high priority VC is configured will use that, otherwise will use low priority VC" 1590 ::={whispApsConfig 247} 1591 1592 whispRegStatus OBJECT-TYPE 1593 SYNTAX DisplayString 1594 MAX-ACCESS read-only 1595 STATUS obsolete 1596 DESCRIPTION 1597 "This shows the registration status of a link.[This variable is deprecated, please refer whispBoxLink OIDs]" 1598 ::={whispApsLink 4} 1599 1600-- Link test configuration 1601 1602 linkTestLUID OBJECT-TYPE 1603 SYNTAX INTEGER 1604 MAX-ACCESS read-write 1605 STATUS deprecated 1606 DESCRIPTION 1607 "LUID selection for Link Test. Valid range: 2-255. [This variable is deprecated, please refer whispBoxLink OIDs]" 1608 ::={whispApsLinkTestConfig 1} 1609 1610 linkTestDuration OBJECT-TYPE 1611 SYNTAX INTEGER 1612 MAX-ACCESS read-write 1613 STATUS deprecated 1614 DESCRIPTION 1615 "Duration for the Link Test. Valid range: 2-10 seconds. [This variable is deprecated, please refer whispBoxLink OIDs]" 1616 ::={whispApsLinkTestConfig 2} 1617 1618-- Link test action 1619 1620 linkTestAction OBJECT-TYPE 1621 SYNTAX INTEGER { 1622 stopped(0), 1623 start(1)} 1624 MAX-ACCESS read-write 1625 STATUS deprecated 1626 DESCRIPTION 1627 "Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. 1628 In fact it will return an error message. The value of 0 just indicates the idle state 1629 meaning no test is running or the current test is done. 1630 That's why the word stopped is used and not the action verb stop. 1631 [This variable is deprecated, please refer whispBoxLink OIDs]" 1632 ::={whispApsLinkTestConfig 3} 1633 1634 linkTestPktLength OBJECT-TYPE 1635 SYNTAX INTEGER 1636 MAX-ACCESS read-write 1637 STATUS deprecated 1638 DESCRIPTION 1639 "Packet length for Link Test. Valid range: 64-1714 bytes. [This variable is deprecated, please refer whispBoxLink OIDs]" 1640 ::={whispApsLinkTestConfig 4} 1641 1642 linkTestMode OBJECT-TYPE 1643 SYNTAX INTEGER { 1644 linktestwithmultipleVCs(4), 1645 linktestwithoutbridging(0), 1646 linktestwithbridging(1), 1647 linktestwithbridgingandmir(2), 1648 extrapolatedlinktest(3)} 1649 MAX-ACCESS read-write 1650 STATUS deprecated 1651 DESCRIPTION 1652 "Link Test Mode 1653 0 = Link Test without Bridging 1654 1 = Link Test with Bridging 1655 2 = Link Test with Bridging and MIR 1656 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput) 1657 This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. 1658 It intended to provide a basic link test test without impacting service for the sector. 1659 Extrapolated Link Test is not available for FSK radios. 1660 4 = Link Test with Multiple VCs (traffic sent to all registered VCs, or specified VCs) - 450m only 1661 [This Variable is deprecated. Please refer whispBoxLink OIDs]" 1662 ::={whispApsLinkTestConfig 5} 1663 1664 linkTestSNRCalculation OBJECT-TYPE 1665 SYNTAX INTEGER { 1666 enable(1), 1667 disable(0)} 1668 MAX-ACCESS read-write 1669 STATUS deprecated 1670 DESCRIPTION 1671 "Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. 1672 Enabling(1) will calulate SNR on all receiving packets. 1673 Due to load on CPU, will slightly degrade packet per second capabilities. 1674 Only applicable to GenII OFDM products and up. 1675 [This Variable is deprecated. Please refer whispBoxLink OIDs]" 1676 ::={whispApsLinkTestConfig 6} 1677 1678 linkTestWithDualPath OBJECT-TYPE 1679 SYNTAX INTEGER { 1680 lowpriorityvconly(0), 1681 highandlowpriorityvcs(1)} 1682 MAX-ACCESS read-write 1683 STATUS deprecated 1684 DESCRIPTION 1685 "Link Test with: 1686 0 = Low Priority VC only 1687 1 = High and Low Priority VCs 1688 [This variable is deprecated. Please refer whispBoxLink OIDs]" 1689 ::={whispApsLinkTestConfig 7} 1690 1691-- Link test configuration 1692 1693 linkTestNumPkt OBJECT-TYPE 1694 SYNTAX INTEGER 1695 MAX-ACCESS read-write 1696 STATUS deprecated 1697 DESCRIPTION 1698 "Number of packets to send. Valid range: 0-64 where 0 will 1699 flood the link for the duration of the test. 1700 [This variable is deprecated. Please refer whispBoxLink OIDs]" 1701 ::={whispApsLinkTestConfig 8} 1702 1703 linkTestForceModulation OBJECT-TYPE 1704 SYNTAX INTEGER { 1705 normalRateAdapt(0), 1706 forceMaxModulation(1)} 1707 MAX-ACCESS read-write 1708 STATUS deprecated 1709 DESCRIPTION 1710 "Engineering use only. 1711 Link Test with: 1712 0 = Normal Rate Adapt algorithm 1713 1 = Force to max modultion - No Rate Adapt Algorithm 1714 [This variable is deprecated. Please refer whispBoxLink OIDs]" 1715 ::={whispApsLinkTestConfig 9} 1716 1717 linkTestDirection OBJECT-TYPE 1718 SYNTAX INTEGER { 1719 bidirectional(0), 1720 uplinkonly(1), 1721 downlinkonly(2)} 1722 MAX-ACCESS read-write 1723 STATUS deprecated 1724 DESCRIPTION 1725 "Link Test Direction - Engineering Use Only 1726 0 = default (will do bidirectional) 1727 1 = Uplink Only 1728 2 = Downlink Only 1729 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0) 1730 [This variable is deprecated. Please refer whispBoxLink OIDs]" 1731 ::={whispApsLinkTestConfig 10} 1732 1733-- Link test results 1734 1735 testLUID OBJECT-TYPE 1736 SYNTAX INTEGER 1737 MAX-ACCESS read-only 1738 STATUS deprecated 1739 DESCRIPTION 1740 "LUID number of selected unit. [This variable is deprecated, please refer whispBoxLink OIDs]" 1741 ::={whispApsLinkTestResult 1} 1742 1743 linkTestStatus OBJECT-TYPE 1744 SYNTAX DisplayString 1745 MAX-ACCESS read-only 1746 STATUS deprecated 1747 DESCRIPTION 1748 "Status for Link Test.[This variable is deprecated, please refer whispBoxLink OIDs]" 1749 ::={whispApsLinkTestResult 2} 1750 1751 linkTestError OBJECT-TYPE 1752 SYNTAX DisplayString 1753 MAX-ACCESS read-only 1754 STATUS deprecated 1755 DESCRIPTION 1756 "Error status of Link Test: 1757 (1) Failed to recieve handshake from remote device 1758 (2) No session is currently active. Please try again after session established. 1759 (3) Received a bad transaction ID. Please try again. 1760 (4) We werent able to send the test request to the remote device. 1761 (5) We didnt receive any results from the remote device. 1762 [This variable is deprecated, please refer whispBoxLink OIDs]" 1763 ::={whispApsLinkTestResult 3} 1764 1765 testDuration OBJECT-TYPE 1766 SYNTAX INTEGER 1767 MAX-ACCESS read-only 1768 STATUS deprecated 1769 DESCRIPTION 1770 "Duration of link test.[This variable is deprecated, please refer whispBoxLink OIDs]" 1771 ::={whispApsLinkTestResult 4} 1772 1773 downLinkRate OBJECT-TYPE 1774 SYNTAX INTEGER 1775 UNITS "bps" 1776 MAX-ACCESS read-only 1777 STATUS deprecated 1778 DESCRIPTION 1779 "Downlink Rate.[This variable is deprecated, please refer whispBoxLink OIDs]" 1780 ::={whispApsLinkTestResult 5} 1781 1782 upLinkRate OBJECT-TYPE 1783 SYNTAX INTEGER 1784 UNITS "bps" 1785 MAX-ACCESS read-only 1786 STATUS deprecated 1787 DESCRIPTION 1788 "Uplink Rate.[This variable is deprecated, please refer whispBoxLink OIDs]" 1789 ::={whispApsLinkTestResult 6} 1790 1791 downLinkEff OBJECT-TYPE 1792 SYNTAX INTEGER 1793 UNITS "%" 1794 MAX-ACCESS read-only 1795 STATUS deprecated 1796 DESCRIPTION 1797 "Down Link Efficiency." 1798 ::={whispApsLinkTestResult 7} 1799 1800 maxDwnLinkIndex OBJECT-TYPE 1801 SYNTAX INTEGER 1802 MAX-ACCESS read-only 1803 STATUS deprecated 1804 DESCRIPTION 1805 "For link test results, the maximum possible downlink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs]" 1806 ::={whispApsLinkTestResult 8} 1807 1808 actDwnLinkIndex OBJECT-TYPE 1809 SYNTAX INTEGER 1810 MAX-ACCESS read-only 1811 STATUS deprecated 1812 DESCRIPTION 1813 "Actual down link index.[This variable is deprecated, please refer whispBoxLink OIDs]" 1814 ::={whispApsLinkTestResult 9} 1815 1816 expDwnFragCount OBJECT-TYPE 1817 SYNTAX Gauge32 1818 MAX-ACCESS read-only 1819 STATUS deprecated 1820 DESCRIPTION 1821 "Expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]" 1822 ::={whispApsLinkTestResult 10} 1823 1824 actDwnFragCount OBJECT-TYPE 1825 SYNTAX Gauge32 1826 MAX-ACCESS read-only 1827 STATUS deprecated 1828 DESCRIPTION 1829 "Actual Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]" 1830 ::={whispApsLinkTestResult 11} 1831 1832 upLinkEff OBJECT-TYPE 1833 SYNTAX INTEGER 1834 UNITS "%" 1835 MAX-ACCESS read-only 1836 STATUS deprecated 1837 DESCRIPTION 1838 "Up link efficiency.[This variable is deprecated, please refer whispBoxLink OIDs]" 1839 ::={whispApsLinkTestResult 12} 1840 1841 expUpFragCount OBJECT-TYPE 1842 SYNTAX Gauge32 1843 MAX-ACCESS read-only 1844 STATUS deprecated 1845 DESCRIPTION 1846 "Uplink expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]" 1847 ::={whispApsLinkTestResult 13} 1848 1849 actUpFragCount OBJECT-TYPE 1850 SYNTAX Gauge32 1851 MAX-ACCESS read-only 1852 STATUS deprecated 1853 DESCRIPTION 1854 "Actual uplink Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs]" 1855 ::={whispApsLinkTestResult 14} 1856 1857 maxUpLinkIndex OBJECT-TYPE 1858 SYNTAX INTEGER 1859 MAX-ACCESS read-only 1860 STATUS deprecated 1861 DESCRIPTION 1862 "For link test results, the maximum possible uplink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs]" 1863 ::={whispApsLinkTestResult 15} 1864 1865 actUpLinkIndex OBJECT-TYPE 1866 SYNTAX INTEGER 1867 MAX-ACCESS read-only 1868 STATUS deprecated 1869 DESCRIPTION 1870 "Actual Up link index.[This variable is deprecated, please refer whispBoxLink OIDs]" 1871 ::={whispApsLinkTestResult 16} 1872 1873 fragments1xDwnLinkVertical OBJECT-TYPE 1874 SYNTAX INTEGER 1875 MAX-ACCESS read-only 1876 STATUS deprecated 1877 DESCRIPTION 1878 "Number of fragments received on down link at 1X (QPSK). 1879 For Gen II OFDM and forward. 1880 For MIMO this is the vertical path. 1881 [This variable is deprecated, please refer whispBoxLink OIDs]" 1882 ::={whispApsLinkTestResult 17} 1883 1884 fragments2xDwnLinkVertical OBJECT-TYPE 1885 SYNTAX INTEGER 1886 MAX-ACCESS read-only 1887 STATUS deprecated 1888 DESCRIPTION 1889 "Number of fragments received on down link at 2X (16-QAM). 1890 For Gen II OFDM and forward. 1891 For MIMO this is the vertical path. 1892 [This variable is deprecated, please refer whispBoxLink OIDs]" 1893 ::={whispApsLinkTestResult 18} 1894 1895 fragments3xDwnLinkVertical OBJECT-TYPE 1896 SYNTAX INTEGER 1897 MAX-ACCESS read-only 1898 STATUS deprecated 1899 DESCRIPTION 1900 "Number of fragments received on down link at 3X (64-QAM). 1901 For Gen II OFDM and forward. 1902 For MIMO this is the vertical path. 1903 [This variable is deprecated, please refer whispBoxLink OIDs]" 1904 ::={whispApsLinkTestResult 19} 1905 1906 fragments4xDwnLinkVertical OBJECT-TYPE 1907 SYNTAX INTEGER 1908 MAX-ACCESS read-only 1909 STATUS deprecated 1910 DESCRIPTION 1911 "Number of fragments received on down link at 4X (256-QAM). 1912 For Gen II OFDM and forward. 1913 For MIMO this is the vertical path. 1914 [This variable is deprecated, please refer whispBoxLink OIDs]" 1915 ::={whispApsLinkTestResult 20} 1916 1917 fragments1xUpLinkVertical OBJECT-TYPE 1918 SYNTAX INTEGER 1919 MAX-ACCESS read-only 1920 STATUS deprecated 1921 DESCRIPTION 1922 "Number of fragments received on up link at 1X (QPSK). 1923 For Gen II OFDM and forward. 1924 For MIMO this is the vertical path. 1925 [This variable is deprecated, please refer whispBoxLink OIDs]" 1926 ::={whispApsLinkTestResult 21} 1927 1928 fragments2xUpLinkVertical OBJECT-TYPE 1929 SYNTAX INTEGER 1930 MAX-ACCESS read-only 1931 STATUS deprecated 1932 DESCRIPTION 1933 "Number of fragments received on up link at 2X (16-QAM). 1934 For Gen II OFDM and forward. 1935 For MIMO this is the vertical path. 1936 [This variable is deprecated, please refer whispBoxLink OIDs]" 1937 ::={whispApsLinkTestResult 22} 1938 1939 fragments3xUpLinkVertical OBJECT-TYPE 1940 SYNTAX INTEGER 1941 MAX-ACCESS read-only 1942 STATUS deprecated 1943 DESCRIPTION 1944 "Number of fragments received on up link at 3X (64-QAM). 1945 For Gen II OFDM and forward. 1946 For MIMO this is the vertical path. 1947 [This variable is deprecated, please refer whispBoxLink OIDs]" 1948 ::={whispApsLinkTestResult 23} 1949 1950 fragments4xUpLinkVertical OBJECT-TYPE 1951 SYNTAX INTEGER 1952 MAX-ACCESS read-only 1953 STATUS deprecated 1954 DESCRIPTION 1955 "Number of fragments received on up link at 4X (256-QAM). 1956 For Gen II OFDM and forward. 1957 For MIMO this is the vertical path. 1958 [This variable is deprecated, please refer whispBoxLink OIDs]" 1959 ::={whispApsLinkTestResult 24} 1960 1961 bitErrorsCorrected1xDwnLinkVertical OBJECT-TYPE 1962 SYNTAX DisplayString 1963 MAX-ACCESS read-only 1964 STATUS deprecated 1965 DESCRIPTION 1966 "Number of bit errors corrected on average per fragment on down link at 1X (QPSK). 1967 For Gen II OFDM and forward. 1968 For MIMO this is the vertical path. 1969 [This variable is deprecated, please refer whispBoxLink OIDs]" 1970 ::={whispApsLinkTestResult 25} 1971 1972 bitErrorsCorrected2xDwnLinkVertical OBJECT-TYPE 1973 SYNTAX DisplayString 1974 MAX-ACCESS read-only 1975 STATUS deprecated 1976 DESCRIPTION 1977 "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). 1978 For Gen II OFDM and forward. 1979 For MIMO this is the vertical path. 1980 [This variable is deprecated, please refer whispBoxLink OIDs]" 1981 ::={whispApsLinkTestResult 26} 1982 1983 bitErrorsCorrected3xDwnLinkVertical OBJECT-TYPE 1984 SYNTAX DisplayString 1985 MAX-ACCESS read-only 1986 STATUS deprecated 1987 DESCRIPTION 1988 "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). 1989 For Gen II OFDM and forward. 1990 For MIMO this is the vertical path. 1991 [This variable is deprecated, please refer whispBoxLink OIDs]" 1992 ::={whispApsLinkTestResult 27} 1993 1994 bitErrorsCorrected4xDwnLinkVertical OBJECT-TYPE 1995 SYNTAX DisplayString 1996 MAX-ACCESS read-only 1997 STATUS deprecated 1998 DESCRIPTION 1999 "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). 2000 For Gen II OFDM and forward. 2001 For MIMO this is the vertical path. 2002 [This variable is deprecated, please refer whispBoxLink OIDs]" 2003 ::={whispApsLinkTestResult 28} 2004 2005 bitErrorsCorrected1xUpLinkVertical OBJECT-TYPE 2006 SYNTAX DisplayString 2007 MAX-ACCESS read-only 2008 STATUS deprecated 2009 DESCRIPTION 2010 "Number of bit errors corrected on average per fragment on up link at 1X (QPSK). 2011 For Gen II OFDM and forward. 2012 For MIMO this is the vertical path. 2013 [This variable is deprecated, please refer whispBoxLink OIDs]" 2014 ::={whispApsLinkTestResult 29} 2015 2016 bitErrorsCorrected2xUpLinkVertical OBJECT-TYPE 2017 SYNTAX DisplayString 2018 MAX-ACCESS read-only 2019 STATUS deprecated 2020 DESCRIPTION 2021 "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). 2022 For Gen II OFDM and forward. 2023 For MIMO this is the vertical path. 2024 [This variable is deprecated, please refer whispBoxLink OIDs]" 2025 ::={whispApsLinkTestResult 30} 2026 2027 bitErrorsCorrected3xUpLinkVertical OBJECT-TYPE 2028 SYNTAX DisplayString 2029 MAX-ACCESS read-only 2030 STATUS deprecated 2031 DESCRIPTION 2032 "Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). 2033 For Gen II OFDM and forward. 2034 For MIMO this is the vertical path. 2035 [This variable is deprecated, please refer whispBoxLink OIDs]" 2036 ::={whispApsLinkTestResult 31} 2037 2038 bitErrorsCorrected4xUpLinkVertical OBJECT-TYPE 2039 SYNTAX DisplayString 2040 MAX-ACCESS read-only 2041 STATUS deprecated 2042 DESCRIPTION 2043 "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). 2044 For Gen II OFDM and forward. 2045 For MIMO this is the vertical path. 2046 [This variable is deprecated, please refer whispBoxLink OIDs]" 2047 ::={whispApsLinkTestResult 32} 2048 2049 signalToNoiseRatioDownLinkVertical OBJECT-TYPE 2050 SYNTAX INTEGER 2051 MAX-ACCESS read-only 2052 STATUS deprecated 2053 DESCRIPTION 2054 "Estimated Signal to Noise Ratio in dB for the down link. 2055 For Gen II OFDM and forward. 2056 For MIMO this is the vertical path. 2057 [This variable is deprecated, please refer whispBoxLink OIDs]" 2058 ::={whispApsLinkTestResult 33} 2059 2060 signalToNoiseRatioUpLinkVertical OBJECT-TYPE 2061 SYNTAX INTEGER 2062 MAX-ACCESS read-only 2063 STATUS deprecated 2064 DESCRIPTION 2065 "Estimated Signal to Noise Ratio in dB for the up link. 2066 For Gen II OFDM and forward. 2067 For MIMO this is the vertical path. 2068 [This variable is deprecated, please refer whispBoxLink OIDs]" 2069 ::={whispApsLinkTestResult 34} 2070 2071 fragments1xDwnLinkHorizontal OBJECT-TYPE 2072 SYNTAX INTEGER 2073 MAX-ACCESS read-only 2074 STATUS deprecated 2075 DESCRIPTION 2076 "Number of fragments received on down link at 1X (QPSK). 2077 For MIMO only. 2078 For MIMO this is the horizontal path. 2079 Fragments received in MIMO-A will only be counted on vertical. 2080 [This variable is deprecated, please refer whispBoxLink OIDs]" 2081 ::={whispApsLinkTestResult 35} 2082 2083 fragments2xDwnLinkHorizontal OBJECT-TYPE 2084 SYNTAX INTEGER 2085 MAX-ACCESS read-only 2086 STATUS deprecated 2087 DESCRIPTION 2088 "Number of fragments received on down link at 2X (16-QAM). 2089 For MIMO only. 2090 For MIMO this is the horizontal path. 2091 Fragments received in MIMO-A will only be counted on vertical. 2092 [This variable is deprecated, please refer whispBoxLink OIDs]" 2093 ::={whispApsLinkTestResult 36} 2094 2095 fragments3xDwnLinkHorizontal OBJECT-TYPE 2096 SYNTAX INTEGER 2097 MAX-ACCESS read-only 2098 STATUS deprecated 2099 DESCRIPTION 2100 "Number of fragments received on down link at 3X (64-QAM). 2101 For MIMO only. 2102 For MIMO this is the horizontal path. 2103 Fragments received in MIMO-A will only be counted on vertical. 2104 [This variable is deprecated, please refer whispBoxLink OIDs]" 2105 ::={whispApsLinkTestResult 37} 2106 2107 fragments4xDwnLinkHorizontal OBJECT-TYPE 2108 SYNTAX INTEGER 2109 MAX-ACCESS read-only 2110 STATUS deprecated 2111 DESCRIPTION 2112 "Number of fragments received on down link at 4X (256-QAM). 2113 For MIMO only. 2114 For MIMO this is the horizontal path. 2115 Fragments received in MIMO-A will only be counted on vertical. 2116 [This variable is deprecated, please refer whispBoxLink OIDs]" 2117 ::={whispApsLinkTestResult 38} 2118 2119 fragments1xUpLinkHorizontal OBJECT-TYPE 2120 SYNTAX INTEGER 2121 MAX-ACCESS read-only 2122 STATUS deprecated 2123 DESCRIPTION 2124 "Number of fragments received on up link at 1X (QPSK). 2125 For MIMO only. 2126 For MIMO this is the horizontal path. 2127 Fragments received in MIMO-A will only be counted on vertical. 2128 [This variable is deprecated, please refer whispBoxLink OIDs]" 2129 ::={whispApsLinkTestResult 39} 2130 2131 fragments2xUpLinkHorizontal OBJECT-TYPE 2132 SYNTAX INTEGER 2133 MAX-ACCESS read-only 2134 STATUS deprecated 2135 DESCRIPTION 2136 "Number of fragments received on up link at 2X (16-QAM). 2137 For MIMO only. 2138 For MIMO this is the horizontal path. 2139 Fragments received in MIMO-A will only be counted on vertical. 2140 [This variable is deprecated, please refer whispBoxLink OIDs]" 2141 ::={whispApsLinkTestResult 40} 2142 2143 fragments3xUpLinkHorizontal OBJECT-TYPE 2144 SYNTAX INTEGER 2145 MAX-ACCESS read-only 2146 STATUS deprecated 2147 DESCRIPTION 2148 "Number of fragments received on up link at 3X (64-QAM). 2149 For MIMO only. 2150 For MIMO this is the horizontal path. 2151 Fragments received in MIMO-A will only be counted on vertical. 2152 [This variable is deprecated, please refer whispBoxLink OIDs]" 2153 ::={whispApsLinkTestResult 41} 2154 2155 fragments4xUpLinkHorizontal OBJECT-TYPE 2156 SYNTAX INTEGER 2157 MAX-ACCESS read-only 2158 STATUS deprecated 2159 DESCRIPTION 2160 "Number of fragments received on up link at 4X (256-QAM). 2161 For MIMO only. 2162 For MIMO this is the horizontal path. 2163 Fragments received in MIMO-A will only be counted on vertical. 2164 [This variable is deprecated, please refer whispBoxLink OIDs]" 2165 ::={whispApsLinkTestResult 42} 2166 2167 bitErrorsCorrected1xDwnLinkHorizontal OBJECT-TYPE 2168 SYNTAX DisplayString 2169 MAX-ACCESS read-only 2170 STATUS deprecated 2171 DESCRIPTION 2172 "Number of bit errors corrected on average per fragment on down link at 1X (QPSK). 2173 For MIMO and forward. 2174 For MIMO this is the horizontal path. 2175 Fragments received in MIMO-A will only be counted on vertical. 2176 [This variable is deprecated, please refer whispBoxLink OIDs]" 2177 ::={whispApsLinkTestResult 43} 2178 2179 bitErrorsCorrected2xDwnLinkHorizontal OBJECT-TYPE 2180 SYNTAX DisplayString 2181 MAX-ACCESS read-only 2182 STATUS deprecated 2183 DESCRIPTION 2184 "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). 2185 For MIMO and forward. 2186 For MIMO this is the horizontal path. 2187 Fragments received in MIMO-A will only be counted on vertical. 2188 [This variable is deprecated, please refer whispBoxLink OIDs]" 2189 ::={whispApsLinkTestResult 44} 2190 2191 bitErrorsCorrected3xDwnLinkHorizontal OBJECT-TYPE 2192 SYNTAX DisplayString 2193 MAX-ACCESS read-only 2194 STATUS deprecated 2195 DESCRIPTION 2196 "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). 2197 For MIMO and forward. 2198 For MIMO this is the horizontal path. 2199 Fragments received in MIMO-A will only be counted on vertical. 2200 [This variable is deprecated, please refer whispBoxLink OIDs]" 2201 ::={whispApsLinkTestResult 45} 2202 2203 bitErrorsCorrected4xDwnLinkHorizontal OBJECT-TYPE 2204 SYNTAX DisplayString 2205 MAX-ACCESS read-only 2206 STATUS deprecated 2207 DESCRIPTION 2208 "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). 2209 For MIMO and forward. 2210 For MIMO this is the horizontal path. 2211 Fragments received in MIMO-A will only be counted on vertical. 2212 [This variable is deprecated, please refer whispBoxLink OIDs]" 2213 ::={whispApsLinkTestResult 46} 2214 2215 bitErrorsCorrected1xUpLinkHorizontal OBJECT-TYPE 2216 SYNTAX DisplayString 2217 MAX-ACCESS read-only 2218 STATUS deprecated 2219 DESCRIPTION 2220 "Number of bit errors corrected on average per fragment on up link at 1X (QPSK). 2221 For MIMO and forward. 2222 For MIMO this is the horizontal path. 2223 Fragments received in MIMO-A will only be counted on vertical. 2224 [This variable is deprecated, please refer whispBoxLink OIDs]" 2225 ::={whispApsLinkTestResult 47} 2226 2227 bitErrorsCorrected2xUpLinkHorizontal OBJECT-TYPE 2228 SYNTAX DisplayString 2229 MAX-ACCESS read-only 2230 STATUS deprecated 2231 DESCRIPTION 2232 "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). 2233 For MIMO and forward. 2234 For MIMO this is the horizontal path. 2235 Fragments received in MIMO-A will only be counted on vertical. 2236 [This variable is deprecated, please refer whispBoxLink OIDs]" 2237 ::={whispApsLinkTestResult 48} 2238 2239 bitErrorsCorrected3xUpLinkHorizontal OBJECT-TYPE 2240 SYNTAX DisplayString 2241 MAX-ACCESS read-only 2242 STATUS deprecated 2243 DESCRIPTION 2244 "Engineering use only. 2245 Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). 2246 For MIMO and forward. 2247 For MIMO this is the horizontal path. 2248 Fragments received in MIMO-A will only be counted on vertical. 2249 [This variable is deprecated, please refer whispBoxLink OIDs]" 2250 ::={whispApsLinkTestResult 49} 2251 2252 bitErrorsCorrected4xUpLinkHorizontal OBJECT-TYPE 2253 SYNTAX DisplayString 2254 MAX-ACCESS read-only 2255 STATUS deprecated 2256 DESCRIPTION 2257 "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). 2258 For MIMO and forward. 2259 For MIMO this is the horizontal path. 2260 Fragments received in MIMO-A will only be counted on vertical. 2261 [This variable is deprecated, please refer whispBoxLink OIDs]" 2262 ::={whispApsLinkTestResult 50} 2263 2264 signalToNoiseRatioDownLinkHorizontal OBJECT-TYPE 2265 SYNTAX INTEGER 2266 MAX-ACCESS read-only 2267 STATUS deprecated 2268 DESCRIPTION 2269 "Estimated Signal to Noise Ratio in dB for the down link. 2270 For MIMO and forward. 2271 For MIMO this is the horizontal path. 2272 If operating in MIMO-A this will return 0. 2273 [This variable is deprecated, please refer whispBoxLink OIDs]" 2274 ::={whispApsLinkTestResult 51} 2275 2276 signalToNoiseRatioUpLinkHorizontal OBJECT-TYPE 2277 SYNTAX INTEGER 2278 MAX-ACCESS read-only 2279 STATUS deprecated 2280 DESCRIPTION 2281 "Estimated Signal to Noise Ratio in dB for the up link. 2282 For Gen II OFDM and forward. 2283 For MIMO this is the horizontal path. 2284 If operating in MIMO-A this will return 0. 2285 [This variable is deprecated, please refer whispBoxLink OIDs]" 2286 ::={whispApsLinkTestResult 52} 2287 2288 downLinkRateExtrapolated OBJECT-TYPE 2289 SYNTAX INTEGER 2290 UNITS "bps" 2291 MAX-ACCESS read-only 2292 STATUS deprecated 2293 DESCRIPTION 2294 "Extrapolated Downlink Rate from an extrapolated link test. 2295 Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. 2296 This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. 2297 It intended to provide a basic link test test without impacting service for the sector. 2298 [This variable is deprecated, please refer whispBoxLink OIDs]" 2299 ::={whispApsLinkTestResult 53} 2300 2301 upLinkRateExtrapolated OBJECT-TYPE 2302 SYNTAX INTEGER 2303 UNITS "bps" 2304 MAX-ACCESS read-only 2305 STATUS deprecated 2306 DESCRIPTION 2307 "Extrapolated Uplink Rate from an extrapolated link test. 2308 Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. 2309 This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. 2310 It intended to provide a basic link test test without impacting service for the sector. 2311 [This variable is deprecated, please refer whispBoxLink OIDs]" 2312 ::={whispApsLinkTestResult 54} 2313 2314 whispGPSStats OBJECT-TYPE 2315 SYNTAX INTEGER { 2316 gpsSynchronized(1), 2317 gpsLostSync(2), 2318 generatingSync(3)} 2319 MAX-ACCESS read-only 2320 STATUS current 2321 DESCRIPTION 2322 "This shows whether the AP is synchrinized 2323 to the GPS timer." 2324 ::={whispApsGPS 1} 2325 2326 gpsSyncSource OBJECT-TYPE 2327 SYNTAX DisplayString 2328 MAX-ACCESS read-only 2329 STATUS current 2330 DESCRIPTION 2331 "Source of GPS Sync Pulse." 2332 ::={whispApsGPS 2} 2333 2334 gpsSyncStatus OBJECT-TYPE 2335 SYNTAX DisplayString 2336 MAX-ACCESS read-only 2337 STATUS current 2338 DESCRIPTION 2339 "Current Live value of Sync Status." 2340 ::={whispApsGPS 3} 2341 2342 gpsTrackingMode OBJECT-TYPE 2343 SYNTAX DisplayString 2344 MAX-ACCESS read-only 2345 STATUS current 2346 DESCRIPTION 2347 "GPS tracking mode." 2348 ::={whispApsGPS 4} 2349 2350 gpsTime OBJECT-TYPE 2351 SYNTAX DisplayString 2352 MAX-ACCESS read-only 2353 STATUS current 2354 DESCRIPTION 2355 "GPS time." 2356 ::={whispApsGPS 5} 2357 2358 gpsDate OBJECT-TYPE 2359 SYNTAX DisplayString 2360 MAX-ACCESS read-only 2361 STATUS current 2362 DESCRIPTION 2363 "GPS date." 2364 ::={whispApsGPS 6} 2365 2366 gpsSatellitesTracked OBJECT-TYPE 2367 SYNTAX DisplayString 2368 MAX-ACCESS read-only 2369 STATUS current 2370 DESCRIPTION 2371 "Returns Current number of satellites GPS is tracking in string format .use gpsSatellitesTrackedInt to get the value in integer" 2372 ::={whispApsGPS 7} 2373 2374 gpsSatellitesVisible OBJECT-TYPE 2375 SYNTAX DisplayString 2376 MAX-ACCESS read-only 2377 STATUS current 2378 DESCRIPTION 2379 "Return Number of satellites GPS is seeing in string format.Use gpsSatellitesVisibleInt to get value in integer" 2380 ::={whispApsGPS 8} 2381 2382 gpsHeight OBJECT-TYPE 2383 SYNTAX DisplayString 2384 MAX-ACCESS read-only 2385 STATUS current 2386 DESCRIPTION 2387 "GPS height." 2388 ::={whispApsGPS 9} 2389 2390 gpsAntennaConnection OBJECT-TYPE 2391 SYNTAX DisplayString 2392 MAX-ACCESS read-only 2393 STATUS current 2394 DESCRIPTION 2395 "Antenna Connection status." 2396 ::={whispApsGPS 10} 2397 2398 gpsLatitude OBJECT-TYPE 2399 SYNTAX DisplayString 2400 MAX-ACCESS read-only 2401 STATUS current 2402 DESCRIPTION 2403 "GPS Latitude." 2404 ::={whispApsGPS 11} 2405 2406 gpsLongitude OBJECT-TYPE 2407 SYNTAX DisplayString 2408 MAX-ACCESS read-only 2409 STATUS current 2410 DESCRIPTION 2411 "GPS Longitude." 2412 ::={whispApsGPS 12} 2413 2414 gpsInvalidMsg OBJECT-TYPE 2415 SYNTAX DisplayString 2416 MAX-ACCESS read-only 2417 STATUS current 2418 DESCRIPTION 2419 "Number of invalid messages." 2420 ::={whispApsGPS 13} 2421 2422 gpsRestartCount OBJECT-TYPE 2423 SYNTAX INTEGER 2424 MAX-ACCESS read-only 2425 STATUS current 2426 DESCRIPTION 2427 "Number of GPS unit restarts." 2428 ::={whispApsGPS 14} 2429 2430 gpsReInitCount OBJECT-TYPE 2431 SYNTAX INTEGER 2432 MAX-ACCESS read-only 2433 STATUS current 2434 DESCRIPTION 2435 "GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device." 2436 ::={whispApsGPS 15} 2437 2438 gpsReceiverInfo OBJECT-TYPE 2439 SYNTAX DisplayString 2440 MAX-ACCESS read-only 2441 STATUS current 2442 DESCRIPTION 2443 "A textual string contains information on GPS receiver." 2444 ::={whispApsGPS 16} 2445 2446 gpsFreeRun OBJECT-TYPE 2447 SYNTAX INTEGER { 2448 disable(0), 2449 enable(1)} 2450 MAX-ACCESS read-write 2451 STATUS current 2452 DESCRIPTION 2453 "This variable is deprecated. 2454 Setting this value to false will set AutoSync. 2455 Setting this value to true will set AutoSync plus Free Run." 2456 ::={whispApsGPS 17} 2457 2458 autoSyncStatus OBJECT-TYPE 2459 SYNTAX INTEGER { 2460 noSync(0), 2461 onBoardGPSSync(1), 2462 timingPortUGPSSync(2), 2463 onBoardGPSAndTimingPortUGPSSync(3), 2464 powrPortSync(4), 2465 onBoardGPSAndPowrPortSync(5), 2466 timingPortUGPSAndPowrPortSync(6), 2467 onBoardGPSAndTimingPortUGPSAndPowrPortSync(7), 2468 cambiumSync(8), 2469 timingPortUGPSSyncAndCambiumSync(10), 2470 powrPortSyncAndCambiumSync(12), 2471 timingPortUGPSAndPowrPortSyncAndCambiumSync(14)} 2472 MAX-ACCESS read-only 2473 STATUS current 2474 DESCRIPTION 2475 "Current Live value of Sync Status. 2476 Following values represent what sources have sync. 2477 (0) No Sync 2478 (1) On-board GPS Sync 2479 (2) Timing Port/UGPS Sync 2480 (3) On-board GPS and Timing Port/UGPS Sync 2481 (4) Canopy Sync Over Power Port 2482 (5) On-board GPS and Canopy Sync Over Power 2483 (6) Timing Port/UGPS and Canopy Sync Over Power 2484 (7) On-board GPS, Timing Port/UGPS and Canopy Sync Over Power 2485 (8) Cambium Sync Over Power 2486 (10) Timing Port/UGPS and Cambium Sync Over Power 2487 (12) Canopy Sync and Cambium Sync Over Power 2488 (14) Timing Port/UGPS, Canopy Sync Over Power, and Cambium Sync Over Power" 2489 ::={whispApsGPS 18} 2490 2491 gpsSatellitesTrackedInt OBJECT-TYPE 2492 SYNTAX INTEGER 2493 MAX-ACCESS read-only 2494 STATUS current 2495 DESCRIPTION 2496 "Current number of satellites GPS is tracking in integer format." 2497 ::={whispApsGPS 19} 2498 2499 gpsSatellitesVisibleInt OBJECT-TYPE 2500 SYNTAX INTEGER 2501 MAX-ACCESS read-only 2502 STATUS current 2503 DESCRIPTION 2504 "Number of satellites the GPS sees in integer format" 2505 ::={whispApsGPS 20} 2506 2507-- Registration Events 2508 2509 whispRegComplete NOTIFICATION-TYPE 2510 OBJECTS { 2511 linkLUID, 2512 linkPhysAddress} 2513 STATUS current 2514 DESCRIPTION 2515 "Signals registration complete." 2516 ::={whispApsRegEvent 1} 2517 2518 whispRegLost NOTIFICATION-TYPE 2519 OBJECTS { 2520 linkLUID, 2521 linkPhysAddress} 2522 STATUS current 2523 DESCRIPTION 2524 "Signals registration lost." 2525 ::={whispApsRegEvent 2} 2526 2527 whispRegFailure NOTIFICATION-TYPE 2528 OBJECTS { 2529 regFailESN, 2530 regGrantReason} 2531 STATUS current 2532 DESCRIPTION 2533 "Signals a registration failure has occured." 2534 ::={whispApsRegEvent 3} 2535 2536 whispDefKeyUsed NOTIFICATION-TYPE 2537 OBJECTS { 2538 linkLUID, 2539 linkPhysAddress} 2540 STATUS current 2541 DESCRIPTION 2542 "Signals Default Key used for encryptiont." 2543 ::={whispApsRegEvent 4} 2544 2545-- GPS Events 2546 2547 whispGPSInSync NOTIFICATION-TYPE 2548 OBJECTS { 2549 whispGPSStats, 2550 whispBoxEsn} 2551 STATUS current 2552 DESCRIPTION 2553 "Signals a transition from not-synchronized to synchronized." 2554 ::={whispGPSEvent 1} 2555 2556 whispGPSOutSync NOTIFICATION-TYPE 2557 OBJECTS { 2558 gpsStatus, 2559 whispBoxEsn} 2560 STATUS current 2561 DESCRIPTION 2562 "Signals a transition from synchronized to not-synchronized." 2563 ::={whispGPSEvent 2} 2564 2565-- DFS events 2566 2567 whispRadarDetected NOTIFICATION-TYPE 2568 OBJECTS { 2569 dfsStatus, 2570 whispBoxEsn} 2571 STATUS current 2572 DESCRIPTION 2573 "Radar detected transmit stopped." 2574 ::={whispApsDfsEvent 1} 2575 2576 whispRadarEnd NOTIFICATION-TYPE 2577 OBJECTS { 2578 dfsStatus, 2579 whispBoxEsn} 2580 STATUS current 2581 DESCRIPTION 2582 "Radar ended back to normal transmit." 2583 ::={whispApsDfsEvent 2} 2584 2585-- Regulatory Failure due to Invalid Channel set for the region. 2586 2587 regulatoryApCheckInvalidChanFailed NOTIFICATION-TYPE 2588 OBJECTS { 2589 regulatoryStatus, 2590 whispBoxEsn} 2591 STATUS current 2592 DESCRIPTION 2593 "Regulatory Check failed for the unit due to a invalid channel for the configured region. 2594 regulatoryStatus - Text description for the failure. 2595 physAddress - the MAC address of the unit." 2596 ::={whispApRegulatoryEvent 1} 2597 2598-- Regulatory Failure due to no region set 2599 2600 regulatoryCheckFailedNoRegionAp NOTIFICATION-TYPE 2601 OBJECTS { 2602 whispBoxEsn} 2603 STATUS current 2604 DESCRIPTION 2605 "Regulatory Check failed because a valid region has not be configured. 2606 physAddress - the MAC address of the unit." 2607 ::={whispApRegulatoryEvent 2} 2608 2609-- Regulatory Failure due to Invalid Channel Bandwidth set for the region. 2610 2611 regulatoryApCheckInvalidChBwFailed NOTIFICATION-TYPE 2612 OBJECTS { 2613 regulatoryStatus, 2614 whispBoxEsn} 2615 STATUS current 2616 DESCRIPTION 2617 "Regulatory Check failed due to an invalid channel bandwidth for the configured region. 2618 regulatoryStatus - Text description for the failure. 2619 physAddress - the MAC address of the unit." 2620 ::={whispApRegulatoryEvent 3} 2621 2622-- RF link overload detection in the Downlink Direction. 2623 2624 rfLinkOverloadCondition NOTIFICATION-TYPE 2625 OBJECTS { 2626 rfOutDiscardRate, 2627 whispBoxEsn} 2628 STATUS current 2629 DESCRIPTION 2630 "AP has exceeded the preset discard percentage in the RF Downlink Direction. 2631 rfOutDiscardRate - Current discard Rate. 2632 physAddress - the MAC address of the unit." 2633 ::={whispApRFOverloadEvent 1} 2634 2635-- MU-MIMO Trial Event Notification. 2636 2637 mumimoTrialEvent NOTIFICATION-TYPE 2638 OBJECTS { 2639 mumimoTrialPercentageRemaining, 2640 whispBoxEsn} 2641 STATUS current 2642 DESCRIPTION 2643 "MU-MIMO Trial Event Notification. 2644 Value indicates percentage of trial licenses remaining." 2645 ::={whispApsMumimoTrialEvent 1} 2646 2647 whispLinkTestGroup OBJECT-GROUP 2648 OBJECTS { 2649 linkTestLUID, 2650 linkTestDuration, 2651 linkTestAction, 2652 linkTestPktLength, 2653 testLUID, 2654 linkTestStatus, 2655 linkTestError, 2656 testDuration, 2657 downLinkRate, 2658 upLinkRate, 2659 downLinkRateExtrapolated, 2660 upLinkRateExtrapolated, 2661 downLinkEff, 2662 maxDwnLinkIndex, 2663 actDwnLinkIndex, 2664 expDwnFragCount, 2665 actDwnFragCount, 2666 upLinkEff, 2667 expUpFragCount, 2668 actUpFragCount, 2669 maxUpLinkIndex, 2670 actUpLinkIndex, 2671 fragments1xDwnLinkVertical, 2672 fragments2xDwnLinkVertical, 2673 fragments3xDwnLinkVertical, 2674 fragments4xDwnLinkVertical, 2675 fragments1xUpLinkVertical, 2676 fragments2xUpLinkVertical, 2677 fragments3xUpLinkVertical, 2678 fragments4xUpLinkVertical, 2679 fragments1xDwnLinkHorizontal, 2680 fragments2xDwnLinkHorizontal, 2681 fragments3xDwnLinkHorizontal, 2682 fragments4xDwnLinkHorizontal, 2683 fragments1xUpLinkHorizontal, 2684 fragments2xUpLinkHorizontal, 2685 fragments3xUpLinkHorizontal, 2686 fragments4xUpLinkHorizontal, 2687 bitErrorsCorrected1xDwnLinkVertical, 2688 bitErrorsCorrected2xDwnLinkVertical, 2689 bitErrorsCorrected3xDwnLinkVertical, 2690 bitErrorsCorrected4xDwnLinkVertical, 2691 bitErrorsCorrected1xUpLinkVertical, 2692 bitErrorsCorrected2xUpLinkVertical, 2693 bitErrorsCorrected3xUpLinkVertical, 2694 bitErrorsCorrected4xUpLinkVertical, 2695 signalToNoiseRatioDownLinkVertical, 2696 signalToNoiseRatioUpLinkVertical, 2697 bitErrorsCorrected1xDwnLinkHorizontal, 2698 bitErrorsCorrected2xDwnLinkHorizontal, 2699 bitErrorsCorrected3xDwnLinkHorizontal, 2700 bitErrorsCorrected4xDwnLinkHorizontal, 2701 bitErrorsCorrected1xUpLinkHorizontal, 2702 bitErrorsCorrected2xUpLinkHorizontal, 2703 bitErrorsCorrected3xUpLinkHorizontal, 2704 bitErrorsCorrected4xUpLinkHorizontal, 2705 signalToNoiseRatioDownLinkHorizontal, 2706 signalToNoiseRatioUpLinkHorizontal, 2707 linkTestSNRCalculation, 2708 linkTestWithDualPath, 2709 linkTestForceModulation, 2710 linkTestMode, 2711 linkTestNumPkt, 2712 linkTestDirection} 2713 STATUS current 2714 DESCRIPTION 2715 "WHiSP APs link test group." 2716 ::= {whispApsGroups 1} 2717 2718 whispApsConfigGroup OBJECT-GROUP 2719 OBJECTS { 2720 gpsInput, 2721 rfFreqCarrier, 2722 dwnLnkData, 2723 highPriorityUpLnkPct, 2724 numUAckSlots, 2725 uAcksReservHigh, 2726 numDAckSlots, 2727 dAcksReservHigh, 2728 numCtlSlots, 2729 numCtlSlotsReserveHigh, 2730 upLnkMaxBurstDataRate, 2731 upLnkDataRate, 2732 upLnkLimit, 2733 dwnLnkMaxBurstDataRate, 2734 dwnLnkDataRate, 2735 dwnLnkLimit, 2736 sectorID, 2737 maxRange, 2738 asIP1, 2739 asIP2, 2740 asIP3, 2741 asIP4, 2742 asIP5, 2743 lanIpAp, 2744 lanMaskAp, 2745 defaultGwAp, 2746 privateIp, 2747 gpsTrap, 2748 regTrap, 2749 txSpreading, 2750 apBeaconInfo, 2751 authMode, 2752 authKeyAp, 2753 authKeyOptionAP, 2754 enableRadiusDynAuth, 2755 disableAuthForICCSM, 2756 encryptionMode, 2757 ntpServerIp, 2758 multicastRetryCount, 2759 encryptDwBroadcast, 2760 updateAppAddress, 2761 dfsConfig, 2762 vlanEnable, 2763 configSource, 2764 apRateAdapt, 2765 numCtlSlotsHW, 2766 displayAPEval, 2767 smIsolation, 2768 bridgeFloodUnknownsEnable, 2769 ipAccessFilterEnable, 2770 allowedIPAccess1, 2771 allowedIPAccess2, 2772 allowedIPAccess3, 2773 allowedIPAccessNMLength1, 2774 allowedIPAccessNMLength2, 2775 allowedIPAccessNMLength3, 2776 rfTelnetAccess, 2777 rfPPPoEPADIForwarding, 2778 tslBridging, 2779 untranslatedArp, 2780 limitFreqBand900, 2781 txPwrLevel, 2782 rfFreqCaralt1, 2783 rfFreqCaralt2, 2784 scheduleWhitening, 2785 remoteSpectrumAnalysisDuration, 2786 remoteSpectrumAnalyzerLUID, 2787 bhReReg, 2788 dlnkBcastCIR, 2789 dlnkMcastCIR, 2790 verifyGPSChecksum, 2791 mumimoTrialMode, 2792 qinqEthType, 2793 useAPManagementVIDForICCSM, 2794 multicastVCDataRate, 2795 pmp450430LegacyMode, 2796 onlyAllowPMP450iSMRegistration, 2797 frameAlignmentLegacyMode, 2798 pmp430SMRegistration, 2799 colorCodeRescanTimer, 2800 colorCodeRescanIdleTimer, 2801 fskSMRcvTargetLvl, 2802 berModSelect, 2803 lastSesStatsReset, 2804 resetSesStats, 2805 syslogDomainNameAppend, 2806 syslogServerAddr, 2807 syslogServerPort, 2808 syslogXmitAP, 2809 syslogXmitSMs, 2810 freeRunGPSSyncBypass, 2811 uGPSPower, 2812 gpsOutputEn, 2813 prioritizeMgmtData, 2814 radioMode, 2815 noRebootFreqChange, 2816 trapDelayAfterBootup, 2817 pagerRejectFilterSelect, 2818 authSharedSecret1, 2819 authSharedSecret2, 2820 authSharedSecret3, 2821 radiusPort, 2822 radiusAcctPort, 2823 rfOLEnable, 2824 rfOLTrap, 2825 rfOLThreshold, 2826 framePeriod, 2827 remoteSpectrumAnalyzerScanBandwidth, 2828 apConfigAdjacentChanSupport, 2829 ofdmSMRcvTargetLvl, 2830 sMTxPowerControl, 2831 pmp430InteropMode, 2832 apRxDelay, 2833 apVlanOverride, 2834 dhcpRelayAgentEnable, 2835 dhcpRelayAgentSrvrIP, 2836 onlyAllowVer95OrAbove, 2837 whispWebUseAuthServer, 2838 whispUsrAuthSharedSecret1, 2839 whispUsrAuthSharedSecret2, 2840 whispUsrAuthSharedSecret3, 2841 whispUsrAcctSvr1, 2842 whispUsrAcctSvr2, 2843 whispUsrAcctSvr3, 2844 whispUsrAuthPhase1, 2845 accountingInterimUpdateInterval, 2846 accountingSmReAuthInterval, 2847 dropSession, 2848 removeIdleSMs, 2849 lastTimeIdleSMsRemoved, 2850 userAuthSharedSecret1, 2851 userAuthSharedSecret2, 2852 userAuthSharedSecret3, 2853 timeZone, 2854 actionListFilename, 2855 enableAutoupdate} 2856 STATUS current 2857 DESCRIPTION 2858 "WHiSP APs configuration group." 2859 ::= {whispApsGroups 2} 2860 2861 whispApsLinkTableGroup OBJECT-GROUP 2862 OBJECTS { 2863 linkLUID, 2864 linkDescr, 2865 linkPhysAddress, 2866 linkManagementIP, 2867 linkFragmentsReceived1XVertical, 2868 linkFragmentsReceived2XVertical, 2869 linkFragmentsReceived3XVertical, 2870 linkFragmentsReceived4XVertical, 2871 signalToNoiseRatioVertical, 2872 linkFragmentsReceived1XHorizontal, 2873 linkFragmentsReceived2XHorizontal, 2874 linkFragmentsReceived3XHorizontal, 2875 linkFragmentsReceived4XHorizontal, 2876 signalToNoiseRatioHorizontal, 2877 linkSignalStrengthRatio, 2878 linkRadioDbmHorizontal, 2879 linkRadioDbmVertical, 2880 maxSMTxPwr, 2881 productType, 2882 linkAdaptRateLowPri, 2883 linkAdaptRateHighPri, 2884 avgPowerLevelInt, 2885 mimoPowerLevelVertical, 2886 mimoPowerLevelHorizontal, 2887 autoUpdateStatus, 2888 linkMtu, 2889 linkSpeed, 2890 linkOperStatus, 2891 linkInOctets, 2892 linkInUcastPkts, 2893 linkInNUcastPkts, 2894 linkInDiscards, 2895 linkInError, 2896 linkInUnknownProtos, 2897 linkOutOctets, 2898 linkOutUcastPkts, 2899 linkOutNUcastPkts, 2900 linkOutDiscards, 2901 linkOutError, 2902 linkOutQLen, 2903 linkSessState, 2904 linkESN, 2905 linkRSSI, 2906 linkAveJitter, 2907 linkLastJitter, 2908 linkAirDelay, 2909 linkRegCount, 2910 linkReRegCount, 2911 linkTimeOut, 2912 linkLastRSSI, 2913 sessionCount, 2914 softwareVersion, 2915 linkSwVersion, 2916 spatialFrequency, 2917 softwareBootVersion, 2918 fpgaVersion, 2919 linkSiteName, 2920 avgPowerLevel, 2921 lastPowerLevel, 2922 sesDownLinkRate, 2923 sesDownLinkLimit, 2924 sesUpLinkRate, 2925 sesUpLinkLimit, 2926 adaptRate, 2927 sesLoUpCIR, 2928 sesLoDownCIR, 2929 sesHiUpCIR, 2930 sesHiDownCIR, 2931 platformVer, 2932 smSessionTmr, 2933 smSessionSeqNumMismatch, 2934 dataVCNum, 2935 hiPriQEn, 2936 dataVCNumHiQ, 2937 linkInOctetsHiQ, 2938 linkInUcastPktsHiQ, 2939 linkInNUcastPktsHiQ, 2940 linkInDiscardsHiQ, 2941 linkInErrorHiQ, 2942 linkInUnknownProtosHiQ, 2943 linkOutOctetsHiQ, 2944 linkOutUcastPktsHiQ, 2945 linkOutNUcastPktsHiQ, 2946 linkOutDiscardsHiQ, 2947 linkOutErrorHiQ, 2948 vcQOverflow, 2949 vcQOverflowHiQ, 2950 p7p8HiPriQEn, 2951 p7p8HiPriQ, 2952 linkAirDelayns, 2953 linkQualityAPData, 2954 radiusReplyMsg, 2955 radiusFramedIPAddress, 2956 radiusFramedIPNetmask, 2957 radiusDefaultGateway} 2958 STATUS current 2959 DESCRIPTION 2960 "WHiSP APs Link Table group." 2961 ::= {whispApsGroups 3} 2962 2963 whispApsNotifGroup NOTIFICATION-GROUP 2964 NOTIFICATIONS { 2965 whispRegComplete, 2966 whispRegLost, 2967 whispRegFailure, 2968 whispDefKeyUsed, 2969 whispGPSInSync, 2970 whispGPSOutSync, 2971 whispRadarDetected, 2972 whispRadarEnd, 2973 regulatoryApCheckInvalidChanFailed, 2974 regulatoryCheckFailedNoRegionAp, 2975 regulatoryApCheckInvalidChBwFailed, 2976 rfLinkOverloadCondition, 2977 mumimoTrialEvent} 2978 STATUS current 2979 DESCRIPTION 2980 "WHiSP APs notification group." 2981 ::= {whispApsGroups 4} 2982 2983 whispApsFailedRegTableGroup OBJECT-GROUP 2984 OBJECTS { 2985 regGrantReason, 2986 regFailESN, 2987 regFailTime, 2988 regFailSeqNum, 2989 regFailReasonText} 2990 STATUS current 2991 DESCRIPTION 2992 "WHiSP APs Failed Registration Table group." 2993 ::= {whispApsGroups 5} 2994 2995 whispApsFrUtlStatsIntervalLowGroup OBJECT-GROUP 2996 OBJECTS { 2997 frUtlLowTotalDownlinkUtilization, 2998 frUtlLowTotalUplinkUtilization, 2999 frUtlLowTotalDownlinkSlots, 3000 frUtlLowDownlinkLowPrioSlots, 3001 frUtlLowDownlinkHiPrioSlots, 3002 frUtlLowDownlinkBcastSlots, 3003 frUtlLowDownlinkAckSlots, 3004 frUtlLowDownlinkCntlMsgSlots, 3005 frUtlLowTotalUplinkSlots, 3006 frUtlLowUplinkLowPrioSlots, 3007 frUtlLowUplinkHiPrioSlots, 3008 frUtlLowUplinkAckSlots, 3009 frUtlLowMaxDownlinkSlots, 3010 frUtlLowMaxUplinkSlots, 3011 frUtlLowEthInDiscards, 3012 frUtlLowEthOutDiscards, 3013 frUtlLowRFInDiscards, 3014 frUtlLowRFOutDiscards, 3015 frUtlLowIntervalBwReqPercentage, 3016 frUtlLowIntervalBwReqRx, 3017 frUtlLowIntervalBwReqMissed, 3018 frUtlLowContentionSlots, 3019 frUtlLowAvgDownlinkSlots, 3020 frUtlLowAvgUplinkSlots, 3021 frUtlLowAvgContentionSlots, 3022 frUtlLowMaxContentionSlots, 3023 frUtlLowDownlinkAckUtilization, 3024 frUtlLowDownlinkBcastMcastUtilization, 3025 frUtlLowMumimoDownlinkSectorUtilization, 3026 frUtlLowMumimoDownlinkMumimoUtilization, 3027 frUtlLowMumimoDownlinkSumimoUtilization, 3028 frUtlLowMumimoDownlinkMultiplexingGain, 3029 frUtlLowMumimoDownlinkAvgGroupSize} 3030 STATUS current 3031 DESCRIPTION 3032 "WHiSP APs Frame Utilization Statistics group for interval of 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3033 ::= {whispApsGroups 7} 3034 3035 whispApsFrUtlStatsIntervalMediumGroup OBJECT-GROUP 3036 OBJECTS { 3037 frUtlMedTotalDownlinkUtilization, 3038 frUtlMedTotalUplinkUtilization, 3039 frUtlMedTotalDownlinkSlots, 3040 frUtlMedDownlinkLowPrioSlots, 3041 frUtlMedDownlinkHiPrioSlots, 3042 frUtlMedDownlinkBcastSlots, 3043 frUtlMedDownlinkAckSlots, 3044 frUtlMedDownlinkCntlMsgSlots, 3045 frUtlMedTotalUplinkSlots, 3046 frUtlMedUplinkLowPrioSlots, 3047 frUtlMedUplinkHiPrioSlots, 3048 frUtlMedUplinkAckSlots, 3049 frUtlMedMaxDownlinkSlots, 3050 frUtlMedMaxUplinkSlots, 3051 frUtlMedEthInDiscards, 3052 frUtlMedEthOutDiscards, 3053 frUtlMedRFInDiscards, 3054 frUtlMedRFOutDiscards, 3055 frUtlMediumIntervalBwReqPercentage, 3056 frUtlMediumIntervalBwReqRx, 3057 frUtlMediumIntervalBwReqMissed, 3058 frUtlMediumContentionSlots, 3059 frUtlMediumAvgDownlinkSlots, 3060 frUtlMediumAvgUplinkSlots, 3061 frUtlMediumAvgContentionSlots, 3062 frUtlMediumMaxContentionSlots, 3063 frUtlMedDownlinkAckUtilization, 3064 frUtlMedDownlinkBcastMcastUtilization, 3065 frUtlMedMumimoDownlinkSectorUtilization, 3066 frUtlMedMumimoDownlinkMumimoUtilization, 3067 frUtlMedMumimoDownlinkSumimoUtilization, 3068 frUtlMedMumimoDownlinkMultiplexingGain, 3069 frUtlMedMumimoDownlinkAvgGroupSize} 3070 STATUS current 3071 DESCRIPTION 3072 "WHiSP APs Frame Utilization Statistics group for interval of 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3073 ::= {whispApsGroups 8} 3074 3075 whispApsFrUtlStatsIntervalHighGroup OBJECT-GROUP 3076 OBJECTS { 3077 frUtlHighTotalDownlinkUtilization, 3078 frUtlHighTotalUplinkUtilization, 3079 frUtlHighTotalDownlinkSlots, 3080 frUtlHighDownlinkLowPrioSlots, 3081 frUtlHighDownlinkHiPrioSlots, 3082 frUtlHighDownlinkBcastSlots, 3083 frUtlHighDownlinkAckSlots, 3084 frUtlHighDownlinkCntlMsgSlots, 3085 frUtlHighTotalUplinkSlots, 3086 frUtlHighUplinkLowPrioSlots, 3087 frUtlHighUplinkHiPrioSlots, 3088 frUtlHighUplinkAckSlots, 3089 frUtlHighMaxDownlinkSlots, 3090 frUtlHighMaxUplinkSlots, 3091 frUtlHighEthInDiscards, 3092 frUtlHighEthOutDiscards, 3093 frUtlHighRFInDiscards, 3094 frUtlHighRFOutDiscards, 3095 frUtlHighIntervalBwReqPercentage, 3096 frUtlHighIntervalBwReqRx, 3097 frUtlHighIntervalBwReqMissed, 3098 frUtlHighContentionSlots, 3099 frUtlHighAvgDownlinkSlots, 3100 frUtlHighAvgUplinkSlots, 3101 frUtlHighAvgContentionSlots, 3102 frUtlHighMaxContentionSlots, 3103 frUtlHighDownlinkAckUtilization, 3104 frUtlHighDownlinkBcastMcastUtilization, 3105 frUtlHighMumimoDownlinkSectorUtilization, 3106 frUtlHighMumimoDownlinkMumimoUtilization, 3107 frUtlHighMumimoDownlinkSumimoUtilization, 3108 frUtlHighMumimoDownlinkMultiplexingGain, 3109 frUtlHighMumimoDownlinkAvgGroupSize} 3110 STATUS current 3111 DESCRIPTION 3112 "WHiSP APs Frame Utilization Statistics group for interval of 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3113 ::= {whispApsGroups 9} 3114 3115 frUtlLowTotalDownlinkUtilization OBJECT-TYPE 3116 SYNTAX INTEGER 3117 MAX-ACCESS read-only 3118 STATUS current 3119 DESCRIPTION 3120 "Percentage of total downlink utilization in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3121 ::={whispApsFrUtlStatsIntervalLow 1} 3122 3123 frUtlLowTotalUplinkUtilization OBJECT-TYPE 3124 SYNTAX INTEGER 3125 MAX-ACCESS read-only 3126 STATUS current 3127 DESCRIPTION 3128 "Percentage of total uplink utilization in the last 1 minute. Only supported for PMP 450 AP platform." 3129 ::={whispApsFrUtlStatsIntervalLow 2} 3130 3131 frUtlLowTotalDownlinkSlots OBJECT-TYPE 3132 SYNTAX INTEGER 3133 MAX-ACCESS read-only 3134 STATUS current 3135 DESCRIPTION 3136 "Total downlink data slots in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3137 ::={whispApsFrUtlStatsIntervalLow 3} 3138 3139 frUtlLowDownlinkLowPrioSlots OBJECT-TYPE 3140 SYNTAX INTEGER 3141 MAX-ACCESS read-only 3142 STATUS current 3143 DESCRIPTION 3144 "Number of data slots used for downlink low priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3145 ::={whispApsFrUtlStatsIntervalLow 4} 3146 3147 frUtlLowDownlinkHiPrioSlots OBJECT-TYPE 3148 SYNTAX INTEGER 3149 MAX-ACCESS read-only 3150 STATUS current 3151 DESCRIPTION 3152 "Number of data slots used for downlink high priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3153 ::={whispApsFrUtlStatsIntervalLow 5} 3154 3155 frUtlLowDownlinkBcastSlots OBJECT-TYPE 3156 SYNTAX INTEGER 3157 MAX-ACCESS read-only 3158 STATUS current 3159 DESCRIPTION 3160 "Number of data slots used for downlink broadcast and multicast traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3161 ::={whispApsFrUtlStatsIntervalLow 6} 3162 3163 frUtlLowDownlinkAckSlots OBJECT-TYPE 3164 SYNTAX INTEGER 3165 MAX-ACCESS read-only 3166 STATUS current 3167 DESCRIPTION 3168 "Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3169 ::={whispApsFrUtlStatsIntervalLow 7} 3170 3171 frUtlLowDownlinkCntlMsgSlots OBJECT-TYPE 3172 SYNTAX INTEGER 3173 MAX-ACCESS read-only 3174 STATUS current 3175 DESCRIPTION 3176 "Number of data slots used for downlink registration control messages in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3177 ::={whispApsFrUtlStatsIntervalLow 8} 3178 3179 frUtlLowTotalUplinkSlots OBJECT-TYPE 3180 SYNTAX INTEGER 3181 MAX-ACCESS read-only 3182 STATUS current 3183 DESCRIPTION 3184 "Total uplink data slots in the last 1 minute. Only supported for PMP 450 AP platform." 3185 ::={whispApsFrUtlStatsIntervalLow 9} 3186 3187 frUtlLowUplinkLowPrioSlots OBJECT-TYPE 3188 SYNTAX INTEGER 3189 MAX-ACCESS read-only 3190 STATUS current 3191 DESCRIPTION 3192 "Number of data slots used for uplink low priority traffic in the last 1 minute. Only supported for PMP 450 AP platform." 3193 ::={whispApsFrUtlStatsIntervalLow 10} 3194 3195 frUtlLowUplinkHiPrioSlots OBJECT-TYPE 3196 SYNTAX INTEGER 3197 MAX-ACCESS read-only 3198 STATUS current 3199 DESCRIPTION 3200 "Number of data slots used for uplink high priority traffic in the last 1 minute. Only supported for PMP 450 AP platform." 3201 ::={whispApsFrUtlStatsIntervalLow 11} 3202 3203 frUtlLowUplinkAckSlots OBJECT-TYPE 3204 SYNTAX INTEGER 3205 MAX-ACCESS read-only 3206 STATUS current 3207 DESCRIPTION 3208 "Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP 450 AP platform." 3209 ::={whispApsFrUtlStatsIntervalLow 12} 3210 3211 frUtlLowMaxDownlinkSlots OBJECT-TYPE 3212 SYNTAX INTEGER 3213 MAX-ACCESS read-only 3214 STATUS current 3215 DESCRIPTION 3216 "Maximum possible downlink data slots for a minute. 3217 This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 60). 3218 Downlink slots in a frame depends on the frame configuration. 3219 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3220 Only supported for PMP and PTP 450 AP and Backhauls." 3221 ::={whispApsFrUtlStatsIntervalLow 13} 3222 3223 frUtlLowMaxUplinkSlots OBJECT-TYPE 3224 SYNTAX INTEGER 3225 MAX-ACCESS read-only 3226 STATUS current 3227 DESCRIPTION 3228 "Maximum possible uplink data slots for a minute. 3229 This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 60). 3230 Uplink slots in a frame depends on the frame configuration. 3231 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3232 Only supported for PMP 450 AP platform." 3233 ::={whispApsFrUtlStatsIntervalLow 14} 3234 3235 frUtlLowEthInDiscards OBJECT-TYPE 3236 SYNTAX INTEGER 3237 MAX-ACCESS read-only 3238 STATUS current 3239 DESCRIPTION 3240 "Number of incoming ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3241 ::={whispApsFrUtlStatsIntervalLow 15} 3242 3243 frUtlLowEthOutDiscards OBJECT-TYPE 3244 SYNTAX INTEGER 3245 MAX-ACCESS read-only 3246 STATUS current 3247 DESCRIPTION 3248 "Number of outgoing ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3249 ::={whispApsFrUtlStatsIntervalLow 16} 3250 3251 frUtlLowRFInDiscards OBJECT-TYPE 3252 SYNTAX INTEGER 3253 MAX-ACCESS read-only 3254 STATUS current 3255 DESCRIPTION 3256 "Number of incoming radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3257 ::={whispApsFrUtlStatsIntervalLow 17} 3258 3259 frUtlLowRFOutDiscards OBJECT-TYPE 3260 SYNTAX INTEGER 3261 MAX-ACCESS read-only 3262 STATUS current 3263 DESCRIPTION 3264 "Number of outgoing radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3265 ::={whispApsFrUtlStatsIntervalLow 18} 3266 3267 frUtlLowIntervalBwReqPercentage OBJECT-TYPE 3268 SYNTAX INTEGER 3269 MAX-ACCESS read-only 3270 STATUS current 3271 DESCRIPTION 3272 "Percentage of bandwidth request received in the last 1 minute. 3273 Only supported for PMP 450 platform. 3274 PMP 430 SMs will not be included in this statistic." 3275 ::={whispApsFrUtlStatsIntervalLow 19} 3276 3277 frUtlLowIntervalBwReqRx OBJECT-TYPE 3278 SYNTAX INTEGER 3279 MAX-ACCESS read-only 3280 STATUS current 3281 DESCRIPTION 3282 "Number of bandwidth request received in the last 1 minute. 3283 Only supported for PMP 450 platform. 3284 PMP 430 SMs will not be included in this statistic." 3285 ::={whispApsFrUtlStatsIntervalLow 20} 3286 3287 frUtlLowIntervalBwReqMissed OBJECT-TYPE 3288 SYNTAX INTEGER 3289 MAX-ACCESS read-only 3290 STATUS current 3291 DESCRIPTION 3292 "Number of bandwidth request missed in the last 1 minute. 3293 Only supported for PMP 450 platform. 3294 PMP 430 SMs will not be included in this statistic." 3295 ::={whispApsFrUtlStatsIntervalLow 21} 3296 3297 frUtlLowContentionSlots OBJECT-TYPE 3298 SYNTAX INTEGER 3299 MAX-ACCESS read-only 3300 STATUS current 3301 DESCRIPTION 3302 "Number of scheduled contention slots available in the last 1 minute. 3303 Only supported for PMP 450 AP platform." 3304 ::={whispApsFrUtlStatsIntervalLow 22} 3305 3306 frUtlLowAvgDownlinkSlots OBJECT-TYPE 3307 SYNTAX INTEGER 3308 MAX-ACCESS read-only 3309 STATUS current 3310 DESCRIPTION 3311 "Average downlink data slots per frame in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls." 3312 ::={whispApsFrUtlStatsIntervalLow 23} 3313 3314 frUtlLowAvgUplinkSlots OBJECT-TYPE 3315 SYNTAX INTEGER 3316 MAX-ACCESS read-only 3317 STATUS current 3318 DESCRIPTION 3319 "Average uplink data slots per frame in the last 1 minute. Only supported for PMP 450 AP platform." 3320 ::={whispApsFrUtlStatsIntervalLow 24} 3321 3322 frUtlLowAvgContentionSlots OBJECT-TYPE 3323 SYNTAX INTEGER 3324 MAX-ACCESS read-only 3325 STATUS current 3326 DESCRIPTION 3327 "Average contention slots per frame in the last 1 minute. 3328 Only supported for PMP 450 AP platform." 3329 ::={whispApsFrUtlStatsIntervalLow 25} 3330 3331 frUtlLowMaxContentionSlots OBJECT-TYPE 3332 SYNTAX INTEGER 3333 MAX-ACCESS read-only 3334 STATUS current 3335 DESCRIPTION 3336 "Maximum possible contention slots for 1 minute. 3337 This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 60(seconds)). 3338 Uplink slots and contention slots in a frame depend on the frame configuration. 3339 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3340 Only supported for PMP 450 AP platform." 3341 ::={whispApsFrUtlStatsIntervalLow 26} 3342 3343 frUtlLowDownlinkAckUtilization OBJECT-TYPE 3344 SYNTAX INTEGER 3345 MAX-ACCESS read-only 3346 STATUS current 3347 DESCRIPTION 3348 "Percentage of downlink Canopy MAC Acknowledgment utilization in the last 1 minute." 3349 ::={whispApsFrUtlStatsIntervalLow 27} 3350 3351 frUtlLowDownlinkBcastMcastUtilization OBJECT-TYPE 3352 SYNTAX INTEGER 3353 MAX-ACCESS read-only 3354 STATUS current 3355 DESCRIPTION 3356 "Percentage of downlink Broadcast/Multicast utilization in the last 1 minute." 3357 ::={whispApsFrUtlStatsIntervalLow 28} 3358 3359 frUtlLowMumimoDownlinkSectorUtilization OBJECT-TYPE 3360 SYNTAX INTEGER 3361 MAX-ACCESS read-only 3362 STATUS current 3363 DESCRIPTION 3364 "Percentage of MU-MIMO downlink Sector utilization in the last 1 minute. 3365 MU-MIMO only." 3366 ::={whispApsFrUtlStatsIntervalLow 29} 3367 3368 frUtlLowMumimoDownlinkMumimoUtilization OBJECT-TYPE 3369 SYNTAX INTEGER 3370 MAX-ACCESS read-only 3371 STATUS current 3372 DESCRIPTION 3373 "Percentage of MU-MIMO downlink utilization in the last 1 minute. 3374 MU-MIMO only." 3375 ::={whispApsFrUtlStatsIntervalLow 30} 3376 3377 frUtlLowMumimoDownlinkSumimoUtilization OBJECT-TYPE 3378 SYNTAX INTEGER 3379 MAX-ACCESS read-only 3380 STATUS current 3381 DESCRIPTION 3382 "Percentage of SU-MIMO downlink utilization in the last 1 minute. 3383 MU-MIMO only." 3384 ::={whispApsFrUtlStatsIntervalLow 31} 3385 3386 frUtlLowMumimoDownlinkMultiplexingGain OBJECT-TYPE 3387 SYNTAX INTEGER (0..700) 3388 MAX-ACCESS read-only 3389 STATUS current 3390 DESCRIPTION 3391 "MU-MIMO Multiplexing Gain in the last 1 minute. 3392 This value is scaled up by 100 (ie. 269 = 2.69). 3393 MU-MIMO only." 3394 ::={whispApsFrUtlStatsIntervalLow 32} 3395 3396 frUtlLowMumimoDownlinkAvgGroupSize OBJECT-TYPE 3397 SYNTAX INTEGER (0..700) 3398 MAX-ACCESS read-only 3399 STATUS current 3400 DESCRIPTION 3401 "Average MU-MIMO Group Size in the last 1 minute. 3402 This value is scaled up by 100 (ie. 269 = 2.69). 3403 MU-MIMO only." 3404 ::={whispApsFrUtlStatsIntervalLow 33} 3405 3406 frUtlMedTotalDownlinkUtilization OBJECT-TYPE 3407 SYNTAX INTEGER 3408 MAX-ACCESS read-only 3409 STATUS current 3410 DESCRIPTION 3411 "Percentage of total downlink utilization in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3412 ::={whispApsFrUtlStatsIntervalMedium 1} 3413 3414 frUtlMedTotalUplinkUtilization OBJECT-TYPE 3415 SYNTAX INTEGER 3416 MAX-ACCESS read-only 3417 STATUS current 3418 DESCRIPTION 3419 "Percentage of total uplink utilization in the last 5 minutes. Only supported for PMP 450 AP platform." 3420 ::={whispApsFrUtlStatsIntervalMedium 2} 3421 3422 frUtlMedTotalDownlinkSlots OBJECT-TYPE 3423 SYNTAX INTEGER 3424 MAX-ACCESS read-only 3425 STATUS current 3426 DESCRIPTION 3427 "Total downlink data slots in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3428 ::={whispApsFrUtlStatsIntervalMedium 3} 3429 3430 frUtlMedDownlinkLowPrioSlots OBJECT-TYPE 3431 SYNTAX INTEGER 3432 MAX-ACCESS read-only 3433 STATUS current 3434 DESCRIPTION 3435 "Number of data slots used for downlink low priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3436 ::={whispApsFrUtlStatsIntervalMedium 4} 3437 3438 frUtlMedDownlinkHiPrioSlots OBJECT-TYPE 3439 SYNTAX INTEGER 3440 MAX-ACCESS read-only 3441 STATUS current 3442 DESCRIPTION 3443 "Number of data slots used for downlink high priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3444 ::={whispApsFrUtlStatsIntervalMedium 5} 3445 3446 frUtlMedDownlinkBcastSlots OBJECT-TYPE 3447 SYNTAX INTEGER 3448 MAX-ACCESS read-only 3449 STATUS current 3450 DESCRIPTION 3451 "Number of data slots used for downlink broadcast and multicast traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3452 ::={whispApsFrUtlStatsIntervalMedium 6} 3453 3454 frUtlMedDownlinkAckSlots OBJECT-TYPE 3455 SYNTAX INTEGER 3456 MAX-ACCESS read-only 3457 STATUS current 3458 DESCRIPTION 3459 "Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3460 ::={whispApsFrUtlStatsIntervalMedium 7} 3461 3462 frUtlMedDownlinkCntlMsgSlots OBJECT-TYPE 3463 SYNTAX INTEGER 3464 MAX-ACCESS read-only 3465 STATUS current 3466 DESCRIPTION 3467 "Number of data slots used for downlink registration control messages in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3468 ::={whispApsFrUtlStatsIntervalMedium 8} 3469 3470 frUtlMedTotalUplinkSlots OBJECT-TYPE 3471 SYNTAX INTEGER 3472 MAX-ACCESS read-only 3473 STATUS current 3474 DESCRIPTION 3475 "Total uplink data slots in the last 5 minutes. Only supported for PMP 450 AP platform." 3476 ::={whispApsFrUtlStatsIntervalMedium 9} 3477 3478 frUtlMedUplinkLowPrioSlots OBJECT-TYPE 3479 SYNTAX INTEGER 3480 MAX-ACCESS read-only 3481 STATUS current 3482 DESCRIPTION 3483 "Number of data slots used for uplink low priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform." 3484 ::={whispApsFrUtlStatsIntervalMedium 10} 3485 3486 frUtlMedUplinkHiPrioSlots OBJECT-TYPE 3487 SYNTAX INTEGER 3488 MAX-ACCESS read-only 3489 STATUS current 3490 DESCRIPTION 3491 "Number of data slots used for uplink high priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform." 3492 ::={whispApsFrUtlStatsIntervalMedium 11} 3493 3494 frUtlMedUplinkAckSlots OBJECT-TYPE 3495 SYNTAX INTEGER 3496 MAX-ACCESS read-only 3497 STATUS current 3498 DESCRIPTION 3499 "Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP 450 AP platform." 3500 ::={whispApsFrUtlStatsIntervalMedium 12} 3501 3502 frUtlMedMaxDownlinkSlots OBJECT-TYPE 3503 SYNTAX INTEGER 3504 MAX-ACCESS read-only 3505 STATUS current 3506 DESCRIPTION 3507 "Maximum possible downlink data slots for 5 minutes. 3508 This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 5 * 60 (seconds)). 3509 Downlink slots in a frame depends on the frame configuration. 3510 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3511 Only supported for PMP and PTP 450 AP and Backhauls." 3512 ::={whispApsFrUtlStatsIntervalMedium 13} 3513 3514 frUtlMedMaxUplinkSlots OBJECT-TYPE 3515 SYNTAX INTEGER 3516 MAX-ACCESS read-only 3517 STATUS current 3518 DESCRIPTION 3519 "Maximum possible uplink data slots for 5 minutes. 3520 This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 5 * 60(seconds)). 3521 Uplink slots in a frame depends on the frame configuration. 3522 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3523 Only supported for PMP 450 AP platform." 3524 ::={whispApsFrUtlStatsIntervalMedium 14} 3525 3526 frUtlMedEthInDiscards OBJECT-TYPE 3527 SYNTAX INTEGER 3528 MAX-ACCESS read-only 3529 STATUS current 3530 DESCRIPTION 3531 "Number of incoming ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3532 ::={whispApsFrUtlStatsIntervalMedium 15} 3533 3534 frUtlMedEthOutDiscards OBJECT-TYPE 3535 SYNTAX INTEGER 3536 MAX-ACCESS read-only 3537 STATUS current 3538 DESCRIPTION 3539 "Number of outgoing ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3540 ::={whispApsFrUtlStatsIntervalMedium 16} 3541 3542 frUtlMedRFInDiscards OBJECT-TYPE 3543 SYNTAX INTEGER 3544 MAX-ACCESS read-only 3545 STATUS current 3546 DESCRIPTION 3547 "Number of incoming radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3548 ::={whispApsFrUtlStatsIntervalMedium 17} 3549 3550 frUtlMedRFOutDiscards OBJECT-TYPE 3551 SYNTAX INTEGER 3552 MAX-ACCESS read-only 3553 STATUS current 3554 DESCRIPTION 3555 "Number of outgoing radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3556 ::={whispApsFrUtlStatsIntervalMedium 18} 3557 3558 frUtlMediumIntervalBwReqPercentage OBJECT-TYPE 3559 SYNTAX INTEGER 3560 MAX-ACCESS read-only 3561 STATUS current 3562 DESCRIPTION 3563 "Percentage of bandwidth request received in the last 5 minutes. 3564 Only supported for PMP 450 platform. 3565 PMP 430 SMs will not be included in this statistic." 3566 ::={whispApsFrUtlStatsIntervalMedium 19} 3567 3568 frUtlMediumIntervalBwReqRx OBJECT-TYPE 3569 SYNTAX INTEGER 3570 MAX-ACCESS read-only 3571 STATUS current 3572 DESCRIPTION 3573 "Number of bandwidth request received in the last 5 minutes. 3574 Only supported for PMP 450 platform. 3575 PMP 430 SMs will not be included in this statistic." 3576 ::={whispApsFrUtlStatsIntervalMedium 20} 3577 3578 frUtlMediumIntervalBwReqMissed OBJECT-TYPE 3579 SYNTAX INTEGER 3580 MAX-ACCESS read-only 3581 STATUS current 3582 DESCRIPTION 3583 "Number of bandwidth request missed in the last 5 minutes. 3584 Only supported for PMP 450 platform. 3585 PMP 430 SMs will not be included in this statistic." 3586 ::={whispApsFrUtlStatsIntervalMedium 21} 3587 3588 frUtlMediumContentionSlots OBJECT-TYPE 3589 SYNTAX INTEGER 3590 MAX-ACCESS read-only 3591 STATUS current 3592 DESCRIPTION 3593 "Number of scheduled contention slots available in the last 5 minutes. 3594 Only supported for PMP 450 AP platform." 3595 ::={whispApsFrUtlStatsIntervalMedium 22} 3596 3597 frUtlMediumAvgDownlinkSlots OBJECT-TYPE 3598 SYNTAX INTEGER 3599 MAX-ACCESS read-only 3600 STATUS current 3601 DESCRIPTION 3602 "Average downlink data slots per frame in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3603 ::={whispApsFrUtlStatsIntervalMedium 23} 3604 3605 frUtlMediumAvgUplinkSlots OBJECT-TYPE 3606 SYNTAX INTEGER 3607 MAX-ACCESS read-only 3608 STATUS current 3609 DESCRIPTION 3610 "Average uplink data slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform." 3611 ::={whispApsFrUtlStatsIntervalMedium 24} 3612 3613 frUtlMediumAvgContentionSlots OBJECT-TYPE 3614 SYNTAX INTEGER 3615 MAX-ACCESS read-only 3616 STATUS current 3617 DESCRIPTION 3618 "Average contention slots per frame in the last 5 minutes. 3619 Only supported for PMP 450 AP platform." 3620 ::={whispApsFrUtlStatsIntervalMedium 25} 3621 3622 frUtlMediumMaxContentionSlots OBJECT-TYPE 3623 SYNTAX INTEGER 3624 MAX-ACCESS read-only 3625 STATUS current 3626 DESCRIPTION 3627 "Maximum possible contention slots for 5 minutes. 3628 This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 5 * 60(seconds)). 3629 Uplink slots and contention slots in a frame depend on the frame configuration. 3630 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3631 Only supported for PMP 450 AP platform." 3632 ::={whispApsFrUtlStatsIntervalMedium 26} 3633 3634 frUtlMedDownlinkAckUtilization OBJECT-TYPE 3635 SYNTAX INTEGER 3636 MAX-ACCESS read-only 3637 STATUS current 3638 DESCRIPTION 3639 "Percentage of downlink Canopy MAC Acknowledgment utilization in the last 5 minutes." 3640 ::={whispApsFrUtlStatsIntervalMedium 27} 3641 3642 frUtlMedDownlinkBcastMcastUtilization OBJECT-TYPE 3643 SYNTAX INTEGER 3644 MAX-ACCESS read-only 3645 STATUS current 3646 DESCRIPTION 3647 "Percentage of downlink Broadcast/Multicast utilization in the last 5 minutes." 3648 ::={whispApsFrUtlStatsIntervalMedium 28} 3649 3650 frUtlMedMumimoDownlinkSectorUtilization OBJECT-TYPE 3651 SYNTAX INTEGER 3652 MAX-ACCESS read-only 3653 STATUS current 3654 DESCRIPTION 3655 "Percentage of MU-MIMO downlink Sector utilization in the last 5 minutes. 3656 MU-MIMO only." 3657 ::={whispApsFrUtlStatsIntervalMedium 29} 3658 3659 frUtlMedMumimoDownlinkMumimoUtilization OBJECT-TYPE 3660 SYNTAX INTEGER 3661 MAX-ACCESS read-only 3662 STATUS current 3663 DESCRIPTION 3664 "Percentage of MU-MIMO downlink utilization in the last 5 minutes. 3665 MU-MIMO only." 3666 ::={whispApsFrUtlStatsIntervalMedium 30} 3667 3668 frUtlMedMumimoDownlinkSumimoUtilization OBJECT-TYPE 3669 SYNTAX INTEGER 3670 MAX-ACCESS read-only 3671 STATUS current 3672 DESCRIPTION 3673 "Percentage of SU-MIMO downlink utilization in the last 5 minutes. 3674 MU-MIMO only." 3675 ::={whispApsFrUtlStatsIntervalMedium 31} 3676 3677 frUtlMedMumimoDownlinkMultiplexingGain OBJECT-TYPE 3678 SYNTAX INTEGER (0..700) 3679 MAX-ACCESS read-only 3680 STATUS current 3681 DESCRIPTION 3682 "MU-MIMO Multiplexing Gain in the last 5 minutes. 3683 This value is scaled up by 100 (ie. 269 = 2.69). 3684 MU-MIMO only." 3685 ::={whispApsFrUtlStatsIntervalMedium 32} 3686 3687 frUtlMedMumimoDownlinkAvgGroupSize OBJECT-TYPE 3688 SYNTAX INTEGER (0..700) 3689 MAX-ACCESS read-only 3690 STATUS current 3691 DESCRIPTION 3692 "Average MU-MIMO Group Size in the last 5 minutes. 3693 This value is scaled up by 100 (ie. 269 = 2.69). 3694 MU-MIMO only." 3695 ::={whispApsFrUtlStatsIntervalMedium 33} 3696 3697 frUtlHighTotalDownlinkUtilization OBJECT-TYPE 3698 SYNTAX INTEGER 3699 MAX-ACCESS read-only 3700 STATUS current 3701 DESCRIPTION 3702 "Percentage of total downlink utilization in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3703 ::={whispApsFrUtlStatsIntervalHigh 1} 3704 3705 frUtlHighTotalUplinkUtilization OBJECT-TYPE 3706 SYNTAX INTEGER 3707 MAX-ACCESS read-only 3708 STATUS current 3709 DESCRIPTION 3710 "Percentage of total uplink utilization in the last 15 minutes. Only supported for PMP 450 AP platform." 3711 ::={whispApsFrUtlStatsIntervalHigh 2} 3712 3713 frUtlHighTotalDownlinkSlots OBJECT-TYPE 3714 SYNTAX INTEGER 3715 MAX-ACCESS read-only 3716 STATUS current 3717 DESCRIPTION 3718 "Total downlink data slots in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3719 ::={whispApsFrUtlStatsIntervalHigh 3} 3720 3721 frUtlHighDownlinkLowPrioSlots OBJECT-TYPE 3722 SYNTAX INTEGER 3723 MAX-ACCESS read-only 3724 STATUS current 3725 DESCRIPTION 3726 "Number of data slots used for downlink low priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3727 ::={whispApsFrUtlStatsIntervalHigh 4} 3728 3729 frUtlHighDownlinkHiPrioSlots OBJECT-TYPE 3730 SYNTAX INTEGER 3731 MAX-ACCESS read-only 3732 STATUS current 3733 DESCRIPTION 3734 "Number of data slots used for downlink high priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3735 ::={whispApsFrUtlStatsIntervalHigh 5} 3736 3737 frUtlHighDownlinkBcastSlots OBJECT-TYPE 3738 SYNTAX INTEGER 3739 MAX-ACCESS read-only 3740 STATUS current 3741 DESCRIPTION 3742 "Number of data slots used for downlink broadcast and multicast traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3743 ::={whispApsFrUtlStatsIntervalHigh 6} 3744 3745 frUtlHighDownlinkAckSlots OBJECT-TYPE 3746 SYNTAX INTEGER 3747 MAX-ACCESS read-only 3748 STATUS current 3749 DESCRIPTION 3750 "Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3751 ::={whispApsFrUtlStatsIntervalHigh 7} 3752 3753 frUtlHighDownlinkCntlMsgSlots OBJECT-TYPE 3754 SYNTAX INTEGER 3755 MAX-ACCESS read-only 3756 STATUS current 3757 DESCRIPTION 3758 "Number of data slots used for downlink registration control messages in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3759 ::={whispApsFrUtlStatsIntervalHigh 8} 3760 3761 frUtlHighTotalUplinkSlots OBJECT-TYPE 3762 SYNTAX INTEGER 3763 MAX-ACCESS read-only 3764 STATUS current 3765 DESCRIPTION 3766 "Total uplink data slots in the last 15 minutes. Only supported for PMP 450 AP platform." 3767 ::={whispApsFrUtlStatsIntervalHigh 9} 3768 3769 frUtlHighUplinkLowPrioSlots OBJECT-TYPE 3770 SYNTAX INTEGER 3771 MAX-ACCESS read-only 3772 STATUS current 3773 DESCRIPTION 3774 "Number of data slots used for uplink low priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform." 3775 ::={whispApsFrUtlStatsIntervalHigh 10} 3776 3777 frUtlHighUplinkHiPrioSlots OBJECT-TYPE 3778 SYNTAX INTEGER 3779 MAX-ACCESS read-only 3780 STATUS current 3781 DESCRIPTION 3782 "Number of data slots used for uplink high priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform." 3783 ::={whispApsFrUtlStatsIntervalHigh 11} 3784 3785 frUtlHighUplinkAckSlots OBJECT-TYPE 3786 SYNTAX INTEGER 3787 MAX-ACCESS read-only 3788 STATUS current 3789 DESCRIPTION 3790 "Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP 450 AP platform." 3791 ::={whispApsFrUtlStatsIntervalHigh 12} 3792 3793 frUtlHighMaxDownlinkSlots OBJECT-TYPE 3794 SYNTAX INTEGER 3795 MAX-ACCESS read-only 3796 STATUS current 3797 DESCRIPTION 3798 "Maximum possible downlink data slots for 15 minutes. 3799 This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). 3800 Downlink slots in a frame depends on the frame configuration. 3801 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3802 Only supported for PMP and PTP 450 AP and Backhauls." 3803 ::={whispApsFrUtlStatsIntervalHigh 13} 3804 3805 frUtlHighMaxUplinkSlots OBJECT-TYPE 3806 SYNTAX INTEGER 3807 MAX-ACCESS read-only 3808 STATUS current 3809 DESCRIPTION 3810 "Maximum possible uplink data slots for 15 minutes. 3811 This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). 3812 Uplink slots in a frame depends on the frame configuration. 3813 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3814 Only supported for PMP 450 AP platform." 3815 ::={whispApsFrUtlStatsIntervalHigh 14} 3816 3817 frUtlHighEthInDiscards OBJECT-TYPE 3818 SYNTAX INTEGER 3819 MAX-ACCESS read-only 3820 STATUS current 3821 DESCRIPTION 3822 "Number of incoming ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3823 ::={whispApsFrUtlStatsIntervalHigh 15} 3824 3825 frUtlHighEthOutDiscards OBJECT-TYPE 3826 SYNTAX INTEGER 3827 MAX-ACCESS read-only 3828 STATUS current 3829 DESCRIPTION 3830 "Number of outgoing ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3831 ::={whispApsFrUtlStatsIntervalHigh 16} 3832 3833 frUtlHighRFInDiscards OBJECT-TYPE 3834 SYNTAX INTEGER 3835 MAX-ACCESS read-only 3836 STATUS current 3837 DESCRIPTION 3838 "Number of incoming radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3839 ::={whispApsFrUtlStatsIntervalHigh 17} 3840 3841 frUtlHighRFOutDiscards OBJECT-TYPE 3842 SYNTAX INTEGER 3843 MAX-ACCESS read-only 3844 STATUS current 3845 DESCRIPTION 3846 "Number of outgoing radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3847 ::={whispApsFrUtlStatsIntervalHigh 18} 3848 3849 frUtlHighIntervalBwReqPercentage OBJECT-TYPE 3850 SYNTAX INTEGER 3851 MAX-ACCESS read-only 3852 STATUS current 3853 DESCRIPTION 3854 "Percentage of bandwidth request received in the last 15 minutes. 3855 Only supported for PMP 450 platform. 3856 PMP 430 SMs will not be included in this statistic." 3857 ::={whispApsFrUtlStatsIntervalHigh 19} 3858 3859 frUtlHighIntervalBwReqRx OBJECT-TYPE 3860 SYNTAX INTEGER 3861 MAX-ACCESS read-only 3862 STATUS current 3863 DESCRIPTION 3864 "Number of bandwidth request received in the last 15 minutes. 3865 Only supported for PMP 450 platform. 3866 PMP 430 SMs will not be included in this statistic." 3867 ::={whispApsFrUtlStatsIntervalHigh 20} 3868 3869 frUtlHighIntervalBwReqMissed OBJECT-TYPE 3870 SYNTAX INTEGER 3871 MAX-ACCESS read-only 3872 STATUS current 3873 DESCRIPTION 3874 "Number of bandwidth request missed in the last 15 minutes. 3875 Only supported for PMP 450 platform. 3876 PMP 430 SMs will not be included in this statistic." 3877 ::={whispApsFrUtlStatsIntervalHigh 21} 3878 3879 frUtlHighContentionSlots OBJECT-TYPE 3880 SYNTAX INTEGER 3881 MAX-ACCESS read-only 3882 STATUS current 3883 DESCRIPTION 3884 "Number of scheduled contention slots available in the last 15 minutes. 3885 Only supported for PMP 450 AP platform." 3886 ::={whispApsFrUtlStatsIntervalHigh 22} 3887 3888 frUtlHighAvgDownlinkSlots OBJECT-TYPE 3889 SYNTAX INTEGER 3890 MAX-ACCESS read-only 3891 STATUS current 3892 DESCRIPTION 3893 "Average downlink data slots per frame in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls." 3894 ::={whispApsFrUtlStatsIntervalHigh 23} 3895 3896 frUtlHighAvgUplinkSlots OBJECT-TYPE 3897 SYNTAX INTEGER 3898 MAX-ACCESS read-only 3899 STATUS current 3900 DESCRIPTION 3901 "Average uplink data slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform." 3902 ::={whispApsFrUtlStatsIntervalHigh 24} 3903 3904 frUtlHighAvgContentionSlots OBJECT-TYPE 3905 SYNTAX INTEGER 3906 MAX-ACCESS read-only 3907 STATUS current 3908 DESCRIPTION 3909 "Average contention slots per frame in the last 15 minutes. 3910 Only supported for PMP 450 AP platform." 3911 ::={whispApsFrUtlStatsIntervalHigh 25} 3912 3913 frUtlHighMaxContentionSlots OBJECT-TYPE 3914 SYNTAX INTEGER 3915 MAX-ACCESS read-only 3916 STATUS current 3917 DESCRIPTION 3918 "Maximum possible contention slots for 15 minutes. 3919 This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a second) * 15 * 60(seconds)). 3920 Uplink slots and contention slots in a frame depend on the frame configuration. 3921 Number of frames in a second depends on the configured frame period of 5 ms (200 frames) or 2.5 ms (400 frames). 3922 Only supported for PMP 450 AP platform." 3923 ::={whispApsFrUtlStatsIntervalHigh 26} 3924 3925 frUtlHighDownlinkAckUtilization OBJECT-TYPE 3926 SYNTAX INTEGER 3927 MAX-ACCESS read-only 3928 STATUS current 3929 DESCRIPTION 3930 "Percentage of downlink Canopy MAC Acknowledgment utilization in the last 15 minutes. 3931 MU-MIMO only." 3932 ::={whispApsFrUtlStatsIntervalHigh 27} 3933 3934 frUtlHighDownlinkBcastMcastUtilization OBJECT-TYPE 3935 SYNTAX INTEGER 3936 MAX-ACCESS read-only 3937 STATUS current 3938 DESCRIPTION 3939 "Percentage of downlink Broadcast/Multicast utilization in the last 15 minutes." 3940 ::={whispApsFrUtlStatsIntervalHigh 28} 3941 3942 frUtlHighMumimoDownlinkSectorUtilization OBJECT-TYPE 3943 SYNTAX INTEGER 3944 MAX-ACCESS read-only 3945 STATUS current 3946 DESCRIPTION 3947 "Percentage of MU-MIMO downlink Sector utilization in the last 15 minutes. 3948 MU-MIMO only." 3949 ::={whispApsFrUtlStatsIntervalHigh 29} 3950 3951 frUtlHighMumimoDownlinkMumimoUtilization OBJECT-TYPE 3952 SYNTAX INTEGER 3953 MAX-ACCESS read-only 3954 STATUS current 3955 DESCRIPTION 3956 "Percentage of MU-MIMO downlink utilization in the last 15 minutes. 3957 MU-MIMO only." 3958 ::={whispApsFrUtlStatsIntervalHigh 30} 3959 3960 frUtlHighMumimoDownlinkSumimoUtilization OBJECT-TYPE 3961 SYNTAX INTEGER 3962 MAX-ACCESS read-only 3963 STATUS current 3964 DESCRIPTION 3965 "Percentage of SU-MIMO downlink utilization in the last 15 minutes. 3966 MU-MIMO only." 3967 ::={whispApsFrUtlStatsIntervalHigh 31} 3968 3969 frUtlHighMumimoDownlinkMultiplexingGain OBJECT-TYPE 3970 SYNTAX INTEGER (0..700) 3971 MAX-ACCESS read-only 3972 STATUS current 3973 DESCRIPTION 3974 "MU-MIMO Multiplexing Gain in the last 15 minutes. 3975 This value is scaled up by 100 (ie. 269 = 2.69). 3976 MU-MIMO only." 3977 ::={whispApsFrUtlStatsIntervalHigh 32} 3978 3979 frUtlHighMumimoDownlinkAvgGroupSize OBJECT-TYPE 3980 SYNTAX INTEGER (0..700) 3981 MAX-ACCESS read-only 3982 STATUS current 3983 DESCRIPTION 3984 "Average MU-MIMO Group Size in the last 15 minutes. 3985 This value is scaled up by 100 (ie. 269 = 2.69). 3986 MU-MIMO only." 3987 ::={whispApsFrUtlStatsIntervalHigh 33} 3988 3989 whispApsFrUtlStatsMumimoSpatialTable OBJECT-TYPE 3990 SYNTAX SEQUENCE OF WhispApsFrUtlStatsMumimoSpatialEntry 3991 MAX-ACCESS not-accessible 3992 STATUS current 3993 DESCRIPTION 3994 "MU-MIMO Spatial Utilization Metrics." 3995 ::= {whispApsFrUtlStats 4} 3996 3997 whispApsFrUtlStatsMumimoSpatialEntry OBJECT-TYPE 3998 SYNTAX WhispApsFrUtlStatsMumimoSpatialEntry 3999 MAX-ACCESS not-accessible 4000 STATUS current 4001 DESCRIPTION 4002 "MU-MIMO Spatial Utilization Metrics." 4003 INDEX {frUtlMumimoDownlinkUtilizationSfBin} 4004 ::= {whispApsFrUtlStatsMumimoSpatialTable 1} 4005 4006 WhispApsFrUtlStatsMumimoSpatialEntry ::= SEQUENCE{ 4007 frUtlMumimoDownlinkUtilizationSfBin INTEGER, 4008 frUtlMumimoDownlinkUtilizationSfRange DisplayString, 4009 frUtlMumimoDownlinkUtilizationAzimuth DisplayString, 4010 frUtlMumimoDownlinkUtilizationVcRange DisplayString, 4011 frUtlMumimoDownlinkInstantaneousUtilization INTEGER, 4012 frUtlLowTotalMumimoDownlinkUtilization INTEGER, 4013 frUtlMedTotalMumimoDownlinkUtilization INTEGER, 4014 frUtlHighTotalMumimoDownlinkUtilization INTEGER, 4015 frUtlLowMaxMumimoDownlinkUtilization INTEGER, 4016 frUtlMedMaxMumimoDownlinkUtilization INTEGER, 4017 frUtlHighMaxMumimoDownlinkUtilization INTEGER, 4018 frUtlLowMinMumimoDownlinkUtilization INTEGER, 4019 frUtlMedMinMumimoDownlinkUtilization INTEGER, 4020 frUtlHighMinMumimoDownlinkUtilization INTEGER 4021 } 4022 4023 frUtlMumimoDownlinkUtilizationSfBin OBJECT-TYPE 4024 SYNTAX INTEGER (0..32) 4025 MAX-ACCESS read-only 4026 STATUS current 4027 DESCRIPTION 4028 "Spatial Frequency Bin. 4029 MU-MIMO only." 4030 ::={whispApsFrUtlStatsMumimoSpatialEntry 1} 4031 4032 frUtlMumimoDownlinkUtilizationSfRange OBJECT-TYPE 4033 SYNTAX DisplayString 4034 MAX-ACCESS read-only 4035 STATUS current 4036 DESCRIPTION 4037 "Spatial Frequency Range. 4038 MU-MIMO only." 4039 ::={whispApsFrUtlStatsMumimoSpatialEntry 2} 4040 4041 frUtlMumimoDownlinkUtilizationAzimuth OBJECT-TYPE 4042 SYNTAX DisplayString 4043 MAX-ACCESS read-only 4044 STATUS current 4045 DESCRIPTION 4046 "Azimuth Ranges per Spatial Frequency bin. 4047 MU-MIMO only." 4048 ::={whispApsFrUtlStatsMumimoSpatialEntry 3} 4049 4050 frUtlMumimoDownlinkUtilizationVcRange OBJECT-TYPE 4051 SYNTAX DisplayString 4052 MAX-ACCESS read-only 4053 STATUS current 4054 DESCRIPTION 4055 "VCs in Spatial Frequency Range. 4056 MU-MIMO only." 4057 ::={whispApsFrUtlStatsMumimoSpatialEntry 4} 4058 4059 frUtlMumimoDownlinkInstantaneousUtilization OBJECT-TYPE 4060 SYNTAX INTEGER 4061 MAX-ACCESS read-only 4062 STATUS current 4063 DESCRIPTION 4064 "Instantanous MU-MIMO downlink utilization. This updates every 500ms. 4065 MU-MIMO only." 4066 ::={whispApsFrUtlStatsMumimoSpatialEntry 5} 4067 4068 frUtlLowTotalMumimoDownlinkUtilization OBJECT-TYPE 4069 SYNTAX INTEGER 4070 MAX-ACCESS read-only 4071 STATUS current 4072 DESCRIPTION 4073 "Percentage of total MU-MIMO downlink utilization in the last 1 minute. 4074 MU-MIMO only." 4075 ::={whispApsFrUtlStatsMumimoSpatialEntry 6} 4076 4077 frUtlMedTotalMumimoDownlinkUtilization OBJECT-TYPE 4078 SYNTAX INTEGER 4079 MAX-ACCESS read-only 4080 STATUS current 4081 DESCRIPTION 4082 "Percentage of total MU-MIMO downlink utilization in the last 5 minutes. 4083 MU-MIMO only." 4084 ::={whispApsFrUtlStatsMumimoSpatialEntry 7} 4085 4086 frUtlHighTotalMumimoDownlinkUtilization OBJECT-TYPE 4087 SYNTAX INTEGER 4088 MAX-ACCESS read-only 4089 STATUS current 4090 DESCRIPTION 4091 "Percentage of total MU-MIMO downlink utilization in the last 15 minutes. 4092 MU-MIMO only." 4093 ::={whispApsFrUtlStatsMumimoSpatialEntry 8} 4094 4095 frUtlLowMaxMumimoDownlinkUtilization OBJECT-TYPE 4096 SYNTAX INTEGER 4097 MAX-ACCESS read-only 4098 STATUS current 4099 DESCRIPTION 4100 "Maximum MU-MIMO downlink utilization in the last 1 minute. 4101 MU-MIMO only." 4102 ::={whispApsFrUtlStatsMumimoSpatialEntry 9} 4103 4104 frUtlMedMaxMumimoDownlinkUtilization OBJECT-TYPE 4105 SYNTAX INTEGER 4106 MAX-ACCESS read-only 4107 STATUS current 4108 DESCRIPTION 4109 "Maximum MU-MIMO downlink utilization in the last 5 minutes. 4110 MU-MIMO only." 4111 ::={whispApsFrUtlStatsMumimoSpatialEntry 10} 4112 4113 frUtlHighMaxMumimoDownlinkUtilization OBJECT-TYPE 4114 SYNTAX INTEGER 4115 MAX-ACCESS read-only 4116 STATUS current 4117 DESCRIPTION 4118 "Maximum MU-MIMO downlink utilization in the last 15 minutes. 4119 MU-MIMO only." 4120 ::={whispApsFrUtlStatsMumimoSpatialEntry 11} 4121 4122 frUtlLowMinMumimoDownlinkUtilization OBJECT-TYPE 4123 SYNTAX INTEGER 4124 MAX-ACCESS read-only 4125 STATUS current 4126 DESCRIPTION 4127 "Minimum MU-MIMO downlink utilization in the last 1 minute. 4128 MU-MIMO only." 4129 ::={whispApsFrUtlStatsMumimoSpatialEntry 12} 4130 4131 frUtlMedMinMumimoDownlinkUtilization OBJECT-TYPE 4132 SYNTAX INTEGER 4133 MAX-ACCESS read-only 4134 STATUS current 4135 DESCRIPTION 4136 "Minimum MU-MIMO downlink utilization in the last 5 minutes. 4137 MU-MIMO only." 4138 ::={whispApsFrUtlStatsMumimoSpatialEntry 13} 4139 4140 frUtlHighMinMumimoDownlinkUtilization OBJECT-TYPE 4141 SYNTAX INTEGER 4142 MAX-ACCESS read-only 4143 STATUS current 4144 DESCRIPTION 4145 "Minimum MU-MIMO downlink utilization in the last 15 minutes. 4146 MU-MIMO only." 4147 ::={whispApsFrUtlStatsMumimoSpatialEntry 14} 4148 4149 whispApsFrUtlStatsMumimoDistributionTable OBJECT-TYPE 4150 SYNTAX SEQUENCE OF WhispApsFrUtlStatsMumimoDistributionEntry 4151 MAX-ACCESS not-accessible 4152 STATUS current 4153 DESCRIPTION 4154 "MU-MIMO Distribution Metrics." 4155 ::= {whispApsFrUtlStats 5} 4156 4157 whispApsFrUtlStatsMumimoDistributionEntry OBJECT-TYPE 4158 SYNTAX WhispApsFrUtlStatsMumimoDistributionEntry 4159 MAX-ACCESS not-accessible 4160 STATUS current 4161 DESCRIPTION 4162 "MU-MIMO Distribution Metrics." 4163 INDEX {frUtlMumimoDownlinkDistributionIndex} 4164 ::= {whispApsFrUtlStatsMumimoDistributionTable 1} 4165 4166 WhispApsFrUtlStatsMumimoDistributionEntry ::= SEQUENCE{ 4167 frUtlMumimoDownlinkDistributionIndex INTEGER, 4168 frUtlMumimoDownlinkDistributionGroup DisplayString, 4169 frUtlMumimoDownlinkDistributionVc DisplayString, 4170 frUtlMumimoDownlinkDistributionMedianSlotCount INTEGER 4171 } 4172 4173 frUtlMumimoDownlinkDistributionIndex OBJECT-TYPE 4174 SYNTAX INTEGER (0..9) 4175 MAX-ACCESS read-only 4176 STATUS current 4177 DESCRIPTION 4178 "MU-MIMO downlink Distribution Table Index. 4179 MU-MIMO only." 4180 ::={whispApsFrUtlStatsMumimoDistributionEntry 1} 4181 4182 frUtlMumimoDownlinkDistributionGroup OBJECT-TYPE 4183 SYNTAX DisplayString 4184 MAX-ACCESS read-only 4185 STATUS current 4186 DESCRIPTION 4187 "MU-MIMO downlink Distribution Group. 4188 MU-MIMO only." 4189 ::={whispApsFrUtlStatsMumimoDistributionEntry 2} 4190 4191 frUtlMumimoDownlinkDistributionVc OBJECT-TYPE 4192 SYNTAX DisplayString 4193 MAX-ACCESS read-only 4194 STATUS current 4195 DESCRIPTION 4196 "MU-MIMO downlink VC Distribution. 4197 MU-MIMO only." 4198 ::={whispApsFrUtlStatsMumimoDistributionEntry 3} 4199 4200 frUtlMumimoDownlinkDistributionMedianSlotCount OBJECT-TYPE 4201 SYNTAX INTEGER 4202 MAX-ACCESS read-only 4203 STATUS current 4204 DESCRIPTION 4205 "MU-MIMO downlink Median Slot Count Distribution. 4206 MU-MIMO only." 4207 ::={whispApsFrUtlStatsMumimoDistributionEntry 4} 4208 4209-- Access Point status page 4210 4211 regCount OBJECT-TYPE 4212 SYNTAX Unsigned32 4213 MAX-ACCESS read-only 4214 STATUS current 4215 DESCRIPTION 4216 "Number of registered SMs." 4217 ::={whispApsStatus 1} 4218 4219 gpsStatus OBJECT-TYPE 4220 SYNTAX DisplayString 4221 MAX-ACCESS read-only 4222 STATUS current 4223 DESCRIPTION 4224 "GPS status." 4225 ::={whispApsStatus 2} 4226 4227 radioSlicingAp OBJECT-TYPE 4228 SYNTAX INTEGER 4229 MAX-ACCESS read-only 4230 STATUS obsolete 4231 DESCRIPTION 4232 "The variable is deprecated." 4233 ::={whispApsStatus 3} 4234 4235 radioTxGainAp OBJECT-TYPE 4236 SYNTAX INTEGER 4237 MAX-ACCESS read-only 4238 STATUS current 4239 DESCRIPTION 4240 "Radio transmit gain setting." 4241 ::={whispApsStatus 4} 4242 4243 dataSlotDwn OBJECT-TYPE 4244 SYNTAX INTEGER 4245 MAX-ACCESS read-only 4246 STATUS current 4247 DESCRIPTION 4248 "Number of data slot down." 4249 ::={whispApsStatus 5} 4250 4251 dataSlotUp OBJECT-TYPE 4252 SYNTAX INTEGER 4253 MAX-ACCESS read-only 4254 STATUS current 4255 DESCRIPTION 4256 "Number of data slot up." 4257 ::={whispApsStatus 6} 4258 4259 dataSlotUpHi OBJECT-TYPE 4260 SYNTAX Unsigned32 4261 MAX-ACCESS read-only 4262 STATUS current 4263 DESCRIPTION 4264 "Number of high priority data slot up." 4265 ::={whispApsStatus 7} 4266 4267 upLnkAckSlot OBJECT-TYPE 4268 SYNTAX Unsigned32 4269 MAX-ACCESS read-only 4270 STATUS current 4271 DESCRIPTION 4272 "Uplink ack slots." 4273 ::={whispApsStatus 8} 4274 4275 upLnkAckSlotHi OBJECT-TYPE 4276 SYNTAX Unsigned32 4277 MAX-ACCESS read-only 4278 STATUS current 4279 DESCRIPTION 4280 "Hige priority uplink ack slots." 4281 ::={whispApsStatus 9} 4282 4283 dwnLnkAckSlot OBJECT-TYPE 4284 SYNTAX Unsigned32 4285 MAX-ACCESS read-only 4286 STATUS current 4287 DESCRIPTION 4288 "Downlink ack slots." 4289 ::={whispApsStatus 10} 4290 4291 dwnLnkAckSlotHi OBJECT-TYPE 4292 SYNTAX Unsigned32 4293 MAX-ACCESS read-only 4294 STATUS current 4295 DESCRIPTION 4296 "Hige priority downlink ack slots." 4297 ::={whispApsStatus 11} 4298 4299 numCtrSlot OBJECT-TYPE 4300 SYNTAX Unsigned32 4301 MAX-ACCESS read-only 4302 STATUS current 4303 DESCRIPTION 4304 "Number of contention slots." 4305 ::={whispApsStatus 12} 4306 4307 numCtrSlotHi OBJECT-TYPE 4308 SYNTAX Unsigned32 4309 MAX-ACCESS read-only 4310 STATUS current 4311 DESCRIPTION 4312 "High priority control slot." 4313 ::={whispApsStatus 13} 4314 4315 dfsStatus OBJECT-TYPE 4316 SYNTAX DisplayString 4317 MAX-ACCESS read-only 4318 STATUS current 4319 DESCRIPTION 4320 "Dynamic frequency shifting status." 4321 ::={whispApsStatus 14} 4322 4323 dfsStatusPrimary OBJECT-TYPE 4324 SYNTAX DisplayString 4325 MAX-ACCESS read-only 4326 STATUS current 4327 DESCRIPTION 4328 "Dynamic frequency shifting status for Primary Channel." 4329 ::={whispApsStatus 15} 4330 4331 dfsStatusAlt1 OBJECT-TYPE 4332 SYNTAX DisplayString 4333 MAX-ACCESS read-only 4334 STATUS current 4335 DESCRIPTION 4336 "Dynamic frequency shifting status for Alternate Channel 1" 4337 ::={whispApsStatus 16} 4338 4339 dfsStatusAlt2 OBJECT-TYPE 4340 SYNTAX DisplayString 4341 MAX-ACCESS read-only 4342 STATUS current 4343 DESCRIPTION 4344 "Dynamic frequency shifting status for Alternate Channel 2" 4345 ::={whispApsStatus 17} 4346 4347 maxRegSMCount OBJECT-TYPE 4348 SYNTAX INTEGER 4349 MAX-ACCESS read-only 4350 STATUS current 4351 DESCRIPTION 4352 "Maximum number of unique Subscriber Modules registered with this AP at once" 4353 ::={whispApsStatus 18} 4354 4355 systemTime OBJECT-TYPE 4356 SYNTAX DisplayString 4357 MAX-ACCESS read-only 4358 STATUS current 4359 DESCRIPTION 4360 "Displays the system time of the unit" 4361 ::={whispApsStatus 19} 4362 4363 lastNTPTime OBJECT-TYPE 4364 SYNTAX DisplayString 4365 MAX-ACCESS read-only 4366 STATUS current 4367 DESCRIPTION 4368 "Displays the last NTP time acquired by the AP" 4369 ::={whispApsStatus 20} 4370 4371 regulatoryStatus OBJECT-TYPE 4372 SYNTAX DisplayString 4373 MAX-ACCESS read-only 4374 STATUS current 4375 DESCRIPTION 4376 "The current status of the regulatory check on the AP." 4377 ::={whispApsStatus 21} 4378 4379 dhcpRlyAgntStat-reqRecvd OBJECT-TYPE 4380 SYNTAX Counter32 4381 MAX-ACCESS read-only 4382 STATUS current 4383 DESCRIPTION 4384 "Number of DHCP Requests received by the DHCP Relay." 4385 ::={whispApsStatus 22} 4386 4387 dhcpRlyAgntStat-reqRelayed OBJECT-TYPE 4388 SYNTAX Counter32 4389 MAX-ACCESS read-only 4390 STATUS current 4391 DESCRIPTION 4392 "Number of DHCP Requests relayed by the DHCP Relay." 4393 ::={whispApsStatus 23} 4394 4395 dhcpRlyAgntStat-reqDiscards OBJECT-TYPE 4396 SYNTAX Counter32 4397 MAX-ACCESS read-only 4398 STATUS current 4399 DESCRIPTION 4400 "Number of DHCP Requests discarded by the DHCP Relay." 4401 ::={whispApsStatus 24} 4402 4403 dhcpRlyAgntStat-respRecvd OBJECT-TYPE 4404 SYNTAX Counter32 4405 MAX-ACCESS read-only 4406 STATUS current 4407 DESCRIPTION 4408 "Number of DHCP Replies received by the DHCP Relay." 4409 ::={whispApsStatus 25} 4410 4411 dhcpRlyAgntStat-respRelayed OBJECT-TYPE 4412 SYNTAX Counter32 4413 MAX-ACCESS read-only 4414 STATUS current 4415 DESCRIPTION 4416 "Number of DHCP Replies relayed by the DHCP Relay." 4417 ::={whispApsStatus 26} 4418 4419 dhcpRlyAgntStat-respDiscards OBJECT-TYPE 4420 SYNTAX Counter32 4421 MAX-ACCESS read-only 4422 STATUS current 4423 DESCRIPTION 4424 "Number of DHCP Replies discarded by the DHCP Relay." 4425 ::={whispApsStatus 27} 4426 4427 dhcpRlyAgntStat-untrustedDiscards OBJECT-TYPE 4428 SYNTAX Counter32 4429 MAX-ACCESS read-only 4430 STATUS current 4431 DESCRIPTION 4432 "Number of untrusted messages discarded by the DHCP Relay." 4433 ::={whispApsStatus 28} 4434 4435 dhcpRlyAgntStat-maxHopDiscards OBJECT-TYPE 4436 SYNTAX Counter32 4437 MAX-ACCESS read-only 4438 STATUS current 4439 DESCRIPTION 4440 "Number of messages discarded by the DHCP Relay due to exceeded max hop." 4441 ::={whispApsStatus 29} 4442 4443 dhcpRlyAgntStat-pktTooBig OBJECT-TYPE 4444 SYNTAX Counter32 4445 MAX-ACCESS read-only 4446 STATUS current 4447 DESCRIPTION 4448 "Number of messages forwarded without relay information by the DHCP Relay due to relay information exceeding max message size." 4449 ::={whispApsStatus 30} 4450 4451 dhcpRlyAgntStat-invalidGiaddrDiscards OBJECT-TYPE 4452 SYNTAX Counter32 4453 MAX-ACCESS read-only 4454 STATUS current 4455 DESCRIPTION 4456 "Number of messages discarded by the DHCP Relay due to invalid giaddr in packet." 4457 ::={whispApsStatus 31} 4458 4459 regFailureCount OBJECT-TYPE 4460 SYNTAX Counter32 4461 MAX-ACCESS read-only 4462 STATUS current 4463 DESCRIPTION 4464 "The Total number or Registration Grant Failures." 4465 ::={whispApsStatus 32} 4466 4467 ntpLogSNMP OBJECT-TYPE 4468 SYNTAX EventString 4469 MAX-ACCESS read-only 4470 STATUS current 4471 DESCRIPTION 4472 "NTP Log" 4473 ::={whispApsStatus 33} 4474 4475 uGPSPowerStatus OBJECT-TYPE 4476 SYNTAX DisplayString 4477 MAX-ACCESS read-only 4478 STATUS current 4479 DESCRIPTION 4480 "Current UGPS Power Status (UGPS capable APs only)." 4481 ::={whispApsStatus 34} 4482 4483 rfOutDiscardRate OBJECT-TYPE 4484 SYNTAX INTEGER (0..100) 4485 MAX-ACCESS read-only 4486 STATUS current 4487 DESCRIPTION 4488 "Percentage of OutDiscards on the RF link (RF Overload %) in the last minute." 4489 ::={whispApsStatus 35} 4490 4491 autoUpdateGlobalStatus OBJECT-TYPE 4492 SYNTAX INTEGER 4493 MAX-ACCESS read-only 4494 STATUS current 4495 DESCRIPTION 4496 "Status of the Auto-Update Command" 4497 ::={whispApsStatus 36} 4498 4499 currentRadioFreqCarrier OBJECT-TYPE 4500 SYNTAX INTEGER 4501 MAX-ACCESS read-only 4502 STATUS current 4503 DESCRIPTION 4504 "Returns the current operating frequency of the AP. 4505 Units vary by platform: 4506 FSK 5.2, 5.4, 5.7 GHz: OID returns MHz 4507 FSK 900 MHz, 2.4 GHz: OID returns 100's of KHz 4508 OFDM: OID returns 10's of KHz" 4509 ::={whispApsStatus 37} 4510 4511 mumimoMode OBJECT-TYPE 4512 SYNTAX DisplayString 4513 MAX-ACCESS read-only 4514 STATUS current 4515 DESCRIPTION 4516 "Returns the current operating mode of MU-MIMO. 4517 PMP 450m only." 4518 ::={whispApsStatus 38} 4519 4520-- Access Point status page 4521 4522 vcCount OBJECT-TYPE 4523 SYNTAX Unsigned32 4524 MAX-ACCESS read-only 4525 STATUS current 4526 DESCRIPTION 4527 "Number of VCs allocated across all registered SMs." 4528 ::={whispApsStatus 39} 4529 4530 mumimoTrialPercentageRemaining OBJECT-TYPE 4531 SYNTAX INTEGER (0..100) 4532 MAX-ACCESS read-only 4533 STATUS current 4534 DESCRIPTION 4535 "Percentage of remaining MU-MIMO Trial Licenses" 4536 ::={whispApsStatus 40} 4537 4538 ntpDomainNameAppend OBJECT-TYPE 4539 SYNTAX INTEGER { 4540 disableDomain(0), 4541 appendDomain(1)} 4542 MAX-ACCESS read-write 4543 STATUS current 4544 DESCRIPTION 4545 "Select whether to append the configured management domain name to 4546 the configured trap names. For example, if dnsMgmtDomainName is 4547 set to 'example.com', ntpServer is set to 'ntp', and ntpDomainNameAppend 4548 is set to appendDomain, the ntpServer name used would be 'ntp.example.com'." 4549 ::={whispApsDNS 1} 4550 4551 ntpServer1 OBJECT-TYPE 4552 SYNTAX DisplayString 4553 MAX-ACCESS read-write 4554 STATUS current 4555 DESCRIPTION 4556 "NTP Server 1 Address. 4557 Format is either an IP address or DNS name." 4558 ::={whispApsDNS 2} 4559 4560 ntpServer2 OBJECT-TYPE 4561 SYNTAX DisplayString 4562 MAX-ACCESS read-write 4563 STATUS current 4564 DESCRIPTION 4565 "NTP Server 2 Address. 4566 Format is either an IP address or DNS name." 4567 ::={whispApsDNS 3} 4568 4569 ntpServer3 OBJECT-TYPE 4570 SYNTAX DisplayString 4571 MAX-ACCESS read-write 4572 STATUS current 4573 DESCRIPTION 4574 "NTP Server 3 Address. 4575 Format is either an IP address or DNS name." 4576 ::={whispApsDNS 4} 4577 4578 dhcprDomainNameAppend OBJECT-TYPE 4579 SYNTAX INTEGER { 4580 disableDomain(0), 4581 appendDomain(1)} 4582 MAX-ACCESS read-write 4583 STATUS current 4584 DESCRIPTION 4585 "Select whether to append the configured management domain name to 4586 the configured trap names. For example, if dnsMgmtDomainName is 4587 set to 'example.com', dhcprServer is set to 'dhcpr', and dhcprDomainNameAppend 4588 is set to appendDomain, the dhcprServer name used would be 'dhcpr.example.com'." 4589 ::={whispApsDNS 5} 4590 4591 dhcprServer OBJECT-TYPE 4592 SYNTAX DisplayString 4593 MAX-ACCESS read-write 4594 STATUS current 4595 DESCRIPTION 4596 "DHCP Server IP which will be used for forwarding DHCP messages 4597 by the DHCP Relay Agent in the MultiPoint AP. 4598 - Format is either an IP address or DNS name. 4599 - Default is 255.255.255.255 (broadcast)." 4600 ::={whispApsDNS 6} 4601 4602 authDomainNameAppend OBJECT-TYPE 4603 SYNTAX INTEGER { 4604 disableDNSDomain(0), 4605 enableDNSDomain(1)} 4606 MAX-ACCESS read-write 4607 STATUS current 4608 DESCRIPTION 4609 "Select whether to append the configured management domain name to 4610 the configured trap names. For example, if dnsMgmtDomainName is 4611 set to 'example.com', authServer1 is set to 'auth1', and authDomainNameAppend 4612 is set to appendDomain, the authServer1 name used would be 'auth1.example.com'." 4613 ::={whispApsDNS 7} 4614 4615 authServer1 OBJECT-TYPE 4616 SYNTAX DisplayString 4617 MAX-ACCESS read-write 4618 STATUS current 4619 DESCRIPTION 4620 "Authentication Server 1. 4621 Format is either an IP address or DNS name." 4622 ::={whispApsDNS 8} 4623 4624 authServer2 OBJECT-TYPE 4625 SYNTAX DisplayString 4626 MAX-ACCESS read-write 4627 STATUS current 4628 DESCRIPTION 4629 "Authentication Server 2. 4630 Format is either an IP address or DNS name." 4631 ::={whispApsDNS 9} 4632 4633 authServer3 OBJECT-TYPE 4634 SYNTAX DisplayString 4635 MAX-ACCESS read-write 4636 STATUS current 4637 DESCRIPTION 4638 "Authentication Server 3. 4639 Format is either an IP address or DNS name." 4640 ::={whispApsDNS 10} 4641 4642 authServer4 OBJECT-TYPE 4643 SYNTAX DisplayString 4644 MAX-ACCESS read-write 4645 STATUS current 4646 DESCRIPTION 4647 "Authentication Server 4. 4648 Format is either an IP address or DNS name." 4649 ::={whispApsDNS 11} 4650 4651 authServer5 OBJECT-TYPE 4652 SYNTAX DisplayString 4653 MAX-ACCESS read-write 4654 STATUS current 4655 DESCRIPTION 4656 "Authentication Server 5. 4657 Format is either an IP address or DNS name." 4658 ::={whispApsDNS 12} 4659 4660 acctDomainNameAppend OBJECT-TYPE 4661 SYNTAX INTEGER { 4662 disableDomain(0), 4663 appendDomain(1)} 4664 MAX-ACCESS read-write 4665 STATUS obsolete 4666 DESCRIPTION 4667 "Obsoleted. Use whispApsDNS.authDomainNameAppend." 4668 ::={whispApsDNS 13} 4669 4670 userAuthServer1 OBJECT-TYPE 4671 SYNTAX DisplayString 4672 MAX-ACCESS read-write 4673 STATUS current 4674 DESCRIPTION 4675 "User Authentication Server 1. 4676 Format is either an IP address or DNS name." 4677 ::={whispApsDNS 14} 4678 4679 userAuthServer2 OBJECT-TYPE 4680 SYNTAX DisplayString 4681 MAX-ACCESS read-write 4682 STATUS current 4683 DESCRIPTION 4684 "User Authentication Server 2. 4685 Format is either an IP address or DNS name." 4686 ::={whispApsDNS 15} 4687 4688 userAuthServer3 OBJECT-TYPE 4689 SYNTAX DisplayString 4690 MAX-ACCESS read-write 4691 STATUS current 4692 DESCRIPTION 4693 "User Authentication Server 3. 4694 Format is either an IP address or DNS name." 4695 ::={whispApsDNS 16} 4696 4697 userAuthDomainNameAppend OBJECT-TYPE 4698 SYNTAX INTEGER { 4699 disableDNSDomain(0), 4700 enableDNSDomain(1)} 4701 MAX-ACCESS read-write 4702 STATUS current 4703 DESCRIPTION 4704 "Select whether to append the configured management domain name to 4705 the configured user authentication server names. For example, if dnsMgmtDomainName is 4706 set to 'example.com', authServer1 is set to 'auth1', and userAuthDomainNameAppend 4707 is set to enableDNSDomain, the authServer1 name used would be 'auth1.example.com'." 4708 ::={whispApsDNS 17} 4709 4710 clearLinkTableStats OBJECT-TYPE 4711 SYNTAX INTEGER 4712 MAX-ACCESS read-write 4713 STATUS current 4714 DESCRIPTION 4715 "Setting this to a nonzero value will clear the link table stats." 4716 ::={whispApsControls 1} 4717 4718 whispApsLQILowInterval OBJECT-TYPE 4719 SYNTAX SEQUENCE OF WhispApsLQILowIntervalEntry 4720 MAX-ACCESS not-accessible 4721 STATUS current 4722 DESCRIPTION 4723 "Link Quality Indicator one minute interval table." 4724 ::= {whispApsLQI 1} 4725 4726 whispApsLQILowIntervalEntry OBJECT-TYPE 4727 SYNTAX WhispApsLQILowIntervalEntry 4728 MAX-ACCESS not-accessible 4729 STATUS current 4730 DESCRIPTION 4731 "Link Quality Indicator for one minute Interval entry." 4732 INDEX {lqiLowLinkLUID} 4733 ::= {whispApsLQILowInterval 1} 4734 4735 WhispApsLQILowIntervalEntry ::= SEQUENCE{ 4736 lqiLowLinkLUID INTEGER, 4737 lqiLowLQI INTEGER, 4738 lqiLowDownlinkQualityIndex INTEGER, 4739 lqiLowDownlinkAverageActualRate INTEGER, 4740 lqiLowDownlinkExpectedRate INTEGER, 4741 lqiLowUplinkQualityIndex INTEGER, 4742 lqiLowUplinkAverageActualRate INTEGER, 4743 lqiLowUplinkExpectedRate INTEGER, 4744 lqiLowBeaconQualityIndex INTEGER, 4745 lqiLowBeaconPercent INTEGER, 4746 lqiLowReRegQualityIndex INTEGER, 4747 lqiLowReRegCount INTEGER 4748 } 4749 4750 lqiLowLinkLUID OBJECT-TYPE 4751 SYNTAX INTEGER (2..239) 4752 MAX-ACCESS read-only 4753 STATUS current 4754 DESCRIPTION 4755 "Logical User Identfication (LUID) number" 4756 ::={whispApsLQILowIntervalEntry 1} 4757 4758 lqiLowLQI OBJECT-TYPE 4759 SYNTAX INTEGER (0..100) 4760 MAX-ACCESS read-only 4761 STATUS current 4762 DESCRIPTION 4763 "Link Quality Indicator for one minute interval. 4764 Ranges from 0 to 100 where 100 is the best. 4765 It's calculated based on receive power, modulation rate, re-registrations and beacon percentage." 4766 ::={whispApsLQILowIntervalEntry 2} 4767 4768 lqiLowDownlinkQualityIndex OBJECT-TYPE 4769 SYNTAX INTEGER (0..100) 4770 MAX-ACCESS read-only 4771 STATUS current 4772 DESCRIPTION 4773 "Downlink Quality Index for one minute interval in percentage. 100% is best quality" 4774 ::={whispApsLQILowIntervalEntry 3} 4775 4776 lqiLowDownlinkAverageActualRate OBJECT-TYPE 4777 SYNTAX INTEGER (0..80) 4778 MAX-ACCESS read-only 4779 STATUS current 4780 DESCRIPTION 4781 "Downlink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X" 4782 ::={whispApsLQILowIntervalEntry 4} 4783 4784 lqiLowDownlinkExpectedRate OBJECT-TYPE 4785 SYNTAX INTEGER (0..80) 4786 MAX-ACCESS read-only 4787 STATUS current 4788 DESCRIPTION 4789 "Downlink Expected Rate in tenths for one minute interval. eg: 80 is 8X 4790 This is based upon the uplink receive power and does not take into account interference." 4791 ::={whispApsLQILowIntervalEntry 5} 4792 4793 lqiLowUplinkQualityIndex OBJECT-TYPE 4794 SYNTAX INTEGER (0..100) 4795 MAX-ACCESS read-only 4796 STATUS current 4797 DESCRIPTION 4798 "Uplink Quality Index for one minute interval in percentage. 100% is best quality" 4799 ::={whispApsLQILowIntervalEntry 6} 4800 4801 lqiLowUplinkAverageActualRate OBJECT-TYPE 4802 SYNTAX INTEGER (0..80) 4803 MAX-ACCESS read-only 4804 STATUS current 4805 DESCRIPTION 4806 "Uplink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X" 4807 ::={whispApsLQILowIntervalEntry 7} 4808 4809 lqiLowUplinkExpectedRate OBJECT-TYPE 4810 SYNTAX INTEGER (0..80) 4811 MAX-ACCESS read-only 4812 STATUS current 4813 DESCRIPTION 4814 "Uplink Expected Rate in tenths for one minute interval. eg: 80 is 8X 4815 This is based upon the uplink receive power and does not take into account interference." 4816 ::={whispApsLQILowIntervalEntry 8} 4817 4818 lqiLowBeaconQualityIndex OBJECT-TYPE 4819 SYNTAX INTEGER (0..100) 4820 MAX-ACCESS read-only 4821 STATUS current 4822 DESCRIPTION 4823 "Beacon Quality Index for one minute interval in percentage. 100% is best quality" 4824 ::={whispApsLQILowIntervalEntry 9} 4825 4826 lqiLowBeaconPercent OBJECT-TYPE 4827 SYNTAX INTEGER (0..100) 4828 MAX-ACCESS read-only 4829 STATUS current 4830 DESCRIPTION 4831 "Received beacon percentage for one minute interval" 4832 ::={whispApsLQILowIntervalEntry 10} 4833 4834 lqiLowReRegQualityIndex OBJECT-TYPE 4835 SYNTAX INTEGER (0..100) 4836 MAX-ACCESS read-only 4837 STATUS current 4838 DESCRIPTION 4839 "Beacon Quality Index for one minute interval in percentage. 100% is best quality" 4840 ::={whispApsLQILowIntervalEntry 11} 4841 4842 lqiLowReRegCount OBJECT-TYPE 4843 SYNTAX INTEGER (0..100) 4844 MAX-ACCESS read-only 4845 STATUS current 4846 DESCRIPTION 4847 "Re Registration count for one minute interval" 4848 ::={whispApsLQILowIntervalEntry 12} 4849 4850 whispApsLQIMidInterval OBJECT-TYPE 4851 SYNTAX SEQUENCE OF WhispApsLQIMidIntervalEntry 4852 MAX-ACCESS not-accessible 4853 STATUS current 4854 DESCRIPTION 4855 "Link Quality Indicator five minutes interval table." 4856 ::= {whispApsLQI 2} 4857 4858 whispApsLQIMidIntervalEntry OBJECT-TYPE 4859 SYNTAX WhispApsLQIMidIntervalEntry 4860 MAX-ACCESS not-accessible 4861 STATUS current 4862 DESCRIPTION 4863 "Link Quality Indicator for five minutes interval entry." 4864 INDEX {lqiMidLinkLUID} 4865 ::= {whispApsLQIMidInterval 1} 4866 4867 WhispApsLQIMidIntervalEntry ::= SEQUENCE{ 4868 lqiMidLinkLUID INTEGER, 4869 lqiMidLQI INTEGER, 4870 lqiMidDownlinkQualityIndex INTEGER, 4871 lqiMidDownlinkAverageActualRate INTEGER, 4872 lqiMidDownlinkExpectedRate INTEGER, 4873 lqiMidUplinkQualityIndex INTEGER, 4874 lqiMidUplinkAverageActualRate INTEGER, 4875 lqiMidUplinkExpectedRate INTEGER, 4876 lqiMidBeaconQualityIndex INTEGER, 4877 lqiMidBeaconPercent INTEGER, 4878 lqiMidReRegQualityIndex INTEGER, 4879 lqiMidReRegCount INTEGER 4880 } 4881 4882 lqiMidLinkLUID OBJECT-TYPE 4883 SYNTAX INTEGER (2..239) 4884 MAX-ACCESS read-only 4885 STATUS current 4886 DESCRIPTION 4887 "Logical User Identfication (LUID) number" 4888 ::={whispApsLQIMidIntervalEntry 1} 4889 4890 lqiMidLQI OBJECT-TYPE 4891 SYNTAX INTEGER (0..100) 4892 MAX-ACCESS read-only 4893 STATUS current 4894 DESCRIPTION 4895 "Link Quality Indicator for five minutes interval. 4896 Ranges from 0 to 100 where 100 is the best. 4897 It's calculated based on receive power, modulation rate, re-registrations and beacon percentage." 4898 ::={whispApsLQIMidIntervalEntry 2} 4899 4900 lqiMidDownlinkQualityIndex OBJECT-TYPE 4901 SYNTAX INTEGER (0..100) 4902 MAX-ACCESS read-only 4903 STATUS current 4904 DESCRIPTION 4905 "Downlink Quality Index for five minute interval in percentage. 100% is best quality" 4906 ::={whispApsLQIMidIntervalEntry 3} 4907 4908 lqiMidDownlinkAverageActualRate OBJECT-TYPE 4909 SYNTAX INTEGER (0..80) 4910 MAX-ACCESS read-only 4911 STATUS current 4912 DESCRIPTION 4913 "Downlink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X" 4914 ::={whispApsLQIMidIntervalEntry 4} 4915 4916 lqiMidDownlinkExpectedRate OBJECT-TYPE 4917 SYNTAX INTEGER (0..80) 4918 MAX-ACCESS read-only 4919 STATUS current 4920 DESCRIPTION 4921 "Downlink Expected Rate in tenths for five minute interval. eg: 80 is 8X" 4922 ::={whispApsLQIMidIntervalEntry 5} 4923 4924 lqiMidUplinkQualityIndex OBJECT-TYPE 4925 SYNTAX INTEGER (0..100) 4926 MAX-ACCESS read-only 4927 STATUS current 4928 DESCRIPTION 4929 "Uplink Quality Index for five minute interval in percentage. 100% is best quality" 4930 ::={whispApsLQIMidIntervalEntry 6} 4931 4932 lqiMidUplinkAverageActualRate OBJECT-TYPE 4933 SYNTAX INTEGER (0..80) 4934 MAX-ACCESS read-only 4935 STATUS current 4936 DESCRIPTION 4937 "Uplink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X" 4938 ::={whispApsLQIMidIntervalEntry 7} 4939 4940 lqiMidUplinkExpectedRate OBJECT-TYPE 4941 SYNTAX INTEGER (0..80) 4942 MAX-ACCESS read-only 4943 STATUS current 4944 DESCRIPTION 4945 "Uplink Expected Rate in tenths for five minute interval. eg: 80 is 8X 4946 This is based upon the uplink receive power and does not take into account interference." 4947 ::={whispApsLQIMidIntervalEntry 8} 4948 4949 lqiMidBeaconPercent OBJECT-TYPE 4950 SYNTAX INTEGER (0..100) 4951 MAX-ACCESS read-only 4952 STATUS current 4953 DESCRIPTION 4954 "Received beacon percent for five minute interval" 4955 ::={whispApsLQIMidIntervalEntry 9} 4956 4957 lqiMidBeaconQualityIndex OBJECT-TYPE 4958 SYNTAX INTEGER (0..100) 4959 MAX-ACCESS read-only 4960 STATUS current 4961 DESCRIPTION 4962 "Beacon Quality Index for five minute interval in percentage. 100% is best quality" 4963 ::={whispApsLQIMidIntervalEntry 10} 4964 4965 lqiMidReRegCount OBJECT-TYPE 4966 SYNTAX INTEGER (0..100) 4967 MAX-ACCESS read-only 4968 STATUS current 4969 DESCRIPTION 4970 "Re Registration count for five minute interval" 4971 ::={whispApsLQIMidIntervalEntry 11} 4972 4973 lqiMidReRegQualityIndex OBJECT-TYPE 4974 SYNTAX INTEGER (0..100) 4975 MAX-ACCESS read-only 4976 STATUS current 4977 DESCRIPTION 4978 "Beacon Quality Index for five minute interval in percentage. 100% is best quality" 4979 ::={whispApsLQIMidIntervalEntry 12} 4980 4981 whispApsLQIHighInterval OBJECT-TYPE 4982 SYNTAX SEQUENCE OF WhispApsLQIHighIntervalEntry 4983 MAX-ACCESS not-accessible 4984 STATUS current 4985 DESCRIPTION 4986 "Link Quality Indicator fifteen minutes interval table." 4987 ::= {whispApsLQI 3} 4988 4989 whispApsLQIHighIntervalEntry OBJECT-TYPE 4990 SYNTAX WhispApsLQIHighIntervalEntry 4991 MAX-ACCESS not-accessible 4992 STATUS current 4993 DESCRIPTION 4994 "Link Quality Indicator for fifteen minutes interval entry." 4995 INDEX {lqiHighLinkLUID} 4996 ::= {whispApsLQIHighInterval 1} 4997 4998 WhispApsLQIHighIntervalEntry ::= SEQUENCE{ 4999 lqiHighLinkLUID INTEGER, 5000 lqiHighLQI INTEGER, 5001 lqiHighDownlinkQualityIndex INTEGER, 5002 lqiHighDownlinkAverageActualRate INTEGER, 5003 lqiHighDownlinkExpectedRate INTEGER, 5004 lqiHighUplinkQualityIndex INTEGER, 5005 lqiHighUplinkAverageActualRate INTEGER, 5006 lqiHighUplinkExpectedRate INTEGER, 5007 lqiHighBeaconQualityIndex INTEGER, 5008 lqiHighBeaconPercent INTEGER, 5009 lqiHighReRegQualityIndex INTEGER, 5010 lqiHighReRegCount INTEGER 5011 } 5012 5013 lqiHighLinkLUID OBJECT-TYPE 5014 SYNTAX INTEGER (2..239) 5015 MAX-ACCESS read-only 5016 STATUS current 5017 DESCRIPTION 5018 "Logical User Identfication (LUID) number" 5019 ::={whispApsLQIHighIntervalEntry 1} 5020 5021 lqiHighLQI OBJECT-TYPE 5022 SYNTAX INTEGER (0..100) 5023 MAX-ACCESS read-only 5024 STATUS current 5025 DESCRIPTION 5026 "Link Quality Indicator for fifteen minutes interval. 5027 Ranges from 0 to 100 where 100 is the best. 5028 It's calculated based on receive power, modulation rate, re-registrations and beacon percentage." 5029 ::={whispApsLQIHighIntervalEntry 2} 5030 5031 lqiHighDownlinkQualityIndex OBJECT-TYPE 5032 SYNTAX INTEGER (0..100) 5033 MAX-ACCESS read-only 5034 STATUS current 5035 DESCRIPTION 5036 "Downlink Quality Index for fifteen minute interval in percentage. 100% is best quality" 5037 ::={whispApsLQIHighIntervalEntry 3} 5038 5039 lqiHighDownlinkAverageActualRate OBJECT-TYPE 5040 SYNTAX INTEGER (0..80) 5041 MAX-ACCESS read-only 5042 STATUS current 5043 DESCRIPTION 5044 "Downlink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X" 5045 ::={whispApsLQIHighIntervalEntry 4} 5046 5047 lqiHighDownlinkExpectedRate OBJECT-TYPE 5048 SYNTAX INTEGER (0..80) 5049 MAX-ACCESS read-only 5050 STATUS current 5051 DESCRIPTION 5052 "Downlink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X 5053 This is based upon the uplink receive power and does not take into account interference." 5054 ::={whispApsLQIHighIntervalEntry 5} 5055 5056 lqiHighUplinkQualityIndex OBJECT-TYPE 5057 SYNTAX INTEGER (0..100) 5058 MAX-ACCESS read-only 5059 STATUS current 5060 DESCRIPTION 5061 "Uplink Quality Index for fifteen minute interval in percentage. 100% is best quality" 5062 ::={whispApsLQIHighIntervalEntry 6} 5063 5064 lqiHighUplinkAverageActualRate OBJECT-TYPE 5065 SYNTAX INTEGER (0..80) 5066 MAX-ACCESS read-only 5067 STATUS current 5068 DESCRIPTION 5069 "Uplink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X" 5070 ::={whispApsLQIHighIntervalEntry 7} 5071 5072 lqiHighUplinkExpectedRate OBJECT-TYPE 5073 SYNTAX INTEGER (0..80) 5074 MAX-ACCESS read-only 5075 STATUS current 5076 DESCRIPTION 5077 "Uplink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X 5078 This is based upon the uplink receive power and does not take into account interference." 5079 ::={whispApsLQIHighIntervalEntry 8} 5080 5081 lqiHighBeaconQualityIndex OBJECT-TYPE 5082 SYNTAX INTEGER (0..100) 5083 MAX-ACCESS read-only 5084 STATUS current 5085 DESCRIPTION 5086 "Beacon Quality Index for fifteen minute interval in percentage. 100% is best quality" 5087 ::={whispApsLQIHighIntervalEntry 9} 5088 5089 lqiHighBeaconPercent OBJECT-TYPE 5090 SYNTAX INTEGER (0..100) 5091 MAX-ACCESS read-only 5092 STATUS current 5093 DESCRIPTION 5094 "Received beacon percent for fifteen minute interval" 5095 ::={whispApsLQIHighIntervalEntry 10} 5096 5097 lqiHighReRegQualityIndex OBJECT-TYPE 5098 SYNTAX INTEGER (0..100) 5099 MAX-ACCESS read-only 5100 STATUS current 5101 DESCRIPTION 5102 "Beacon Quality Index for fifteen minute interval in percentage. 100% is best quality" 5103 ::={whispApsLQIHighIntervalEntry 11} 5104 5105 lqiHighReRegCount OBJECT-TYPE 5106 SYNTAX INTEGER (0..100) 5107 MAX-ACCESS read-only 5108 STATUS current 5109 DESCRIPTION 5110 "Re Registration count for fifteen minute interval" 5111 ::={whispApsLQIHighIntervalEntry 12} 5112 5113 whispApsRFConfigRadios OBJECT-TYPE 5114 SYNTAX SEQUENCE OF WhispApsRFConfigRadioEntry 5115 MAX-ACCESS not-accessible 5116 STATUS current 5117 DESCRIPTION 5118 "Radio configuration table." 5119 ::= {whispApsRFConfig 1} 5120 5121 whispApsRFConfigRadioEntry OBJECT-TYPE 5122 SYNTAX WhispApsRFConfigRadioEntry 5123 MAX-ACCESS not-accessible 5124 STATUS current 5125 DESCRIPTION 5126 "Radio configuration entry." 5127 AUGMENTS {whispBoxRFPhysicalRadioEntry} 5128 ::= {whispApsRFConfigRadios 1} 5129 5130 WhispApsRFConfigRadioEntry ::= SEQUENCE{ 5131 radioFreqCarrier INTEGER, 5132 radioDownlinkPercent INTEGER, 5133 radioMaxRange INTEGER, 5134 radioControlSlots INTEGER, 5135 radioTransmitOutputPower INTEGER, 5136 radioColorCode INTEGER 5137 } 5138 5139 radioFreqCarrier OBJECT-TYPE 5140 SYNTAX INTEGER { 5141 wired(0)} 5142 UNITS "kHz" 5143 MAX-ACCESS read-write 5144 STATUS current 5145 DESCRIPTION 5146 "RF Frequency. Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available 5147 frequencies. 5148 0: wired." 5149 ::={whispApsRFConfigRadioEntry 1} 5150 5151 radioDownlinkPercent OBJECT-TYPE 5152 SYNTAX INTEGER (1..99) 5153 UNITS "%" 5154 MAX-ACCESS read-write 5155 STATUS current 5156 DESCRIPTION 5157 "This is the percentage of frame data space allocated for downlink. 5158 Various radio platforms and regions will have different allowable downlink percentages." 5159 ::={whispApsRFConfigRadioEntry 2} 5160 5161 radioMaxRange OBJECT-TYPE 5162 SYNTAX INTEGER 5163 UNITS "miles" 5164 MAX-ACCESS read-write 5165 STATUS current 5166 DESCRIPTION 5167 "Access point max range." 5168 ::={whispApsRFConfigRadioEntry 3} 5169 5170 radioControlSlots OBJECT-TYPE 5171 SYNTAX INTEGER 5172 MAX-ACCESS read-write 5173 STATUS current 5174 DESCRIPTION 5175 "Total number of contention slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios). 5176 For PMP 450 the minimum is 1 control slot, others minimum is zero. 5177 Maximum contention slots is 15." 5178 ::={whispApsRFConfigRadioEntry 4} 5179 5180 radioTransmitOutputPower OBJECT-TYPE 5181 SYNTAX INTEGER 5182 UNITS "dBm" 5183 MAX-ACCESS read-write 5184 STATUS current 5185 DESCRIPTION 5186 "Transmitter output power." 5187 ::={whispApsRFConfigRadioEntry 5} 5188 5189 radioColorCode OBJECT-TYPE 5190 SYNTAX INTEGER (0..254) 5191 MAX-ACCESS read-write 5192 STATUS current 5193 DESCRIPTION 5194 "Color code." 5195 ::={whispApsRFConfigRadioEntry 6} 5196 5197 whispLinkTable OBJECT-TYPE 5198 SYNTAX SEQUENCE OF WhispLinkEntry 5199 MAX-ACCESS not-accessible 5200 STATUS current 5201 DESCRIPTION 5202 "Link Status Table" 5203 ::= {whispAps 4} 5204 5205 whispLinkEntry OBJECT-TYPE 5206 SYNTAX WhispLinkEntry 5207 MAX-ACCESS not-accessible 5208 STATUS current 5209 DESCRIPTION 5210 "Link Status" 5211 INDEX {linkLUID} 5212 ::= {whispLinkTable 1} 5213 5214 WhispLinkEntry ::= SEQUENCE{ 5215 linkLUID INTEGER, 5216 linkDescr DisplayString, 5217 linkPhysAddress PhysAddress, 5218 linkMtu INTEGER, 5219 linkSpeed Gauge32, 5220 linkOperStatus INTEGER, 5221 linkInOctets Counter32, 5222 linkInUcastPkts Counter32, 5223 linkInNUcastPkts Counter32, 5224 linkInDiscards Counter32, 5225 linkInError Counter32, 5226 linkInUnknownProtos Counter32, 5227 linkOutOctets Counter32, 5228 linkOutUcastPkts Counter32, 5229 linkOutNUcastPkts Counter32, 5230 linkOutDiscards Counter32, 5231 linkOutError Counter32, 5232 linkOutQLen Gauge32, 5233 linkSessState INTEGER, 5234 linkESN PhysAddress, 5235 linkRSSI INTEGER, 5236 linkAveJitter Gauge32, 5237 linkLastJitter Gauge32, 5238 linkAirDelay INTEGER, 5239 linkRegCount INTEGER, 5240 linkReRegCount INTEGER, 5241 linkTimeOut INTEGER, 5242 linkLastRSSI INTEGER, 5243 sessionCount INTEGER, 5244 softwareVersion DisplayString, 5245 softwareBootVersion DisplayString, 5246 fpgaVersion DisplayString, 5247 linkSiteName DisplayString, 5248 avgPowerLevel DisplayString, 5249 lastPowerLevel DisplayString, 5250 sesDownLinkRate INTEGER, 5251 sesDownLinkLimit INTEGER, 5252 sesUpLinkRate INTEGER, 5253 sesUpLinkLimit INTEGER, 5254 adaptRate DisplayString, 5255 sesLoUpCIR INTEGER, 5256 sesLoDownCIR INTEGER, 5257 sesHiUpCIR INTEGER, 5258 sesHiDownCIR INTEGER, 5259 platformVer INTEGER, 5260 smSessionTmr TimeTicks, 5261 smSessionSeqNumMismatch Counter32, 5262 dataVCNum INTEGER, 5263 hiPriQEn INTEGER, 5264 dataVCNumHiQ INTEGER, 5265 linkInOctetsHiQ Counter32, 5266 linkInUcastPktsHiQ Counter32, 5267 linkInNUcastPktsHiQ Counter32, 5268 linkInDiscardsHiQ Counter32, 5269 linkInErrorHiQ Counter32, 5270 linkInUnknownProtosHiQ Counter32, 5271 linkOutOctetsHiQ Counter32, 5272 linkOutUcastPktsHiQ Counter32, 5273 linkOutNUcastPktsHiQ Counter32, 5274 linkOutDiscardsHiQ Counter32, 5275 linkOutErrorHiQ Counter32, 5276 vcQOverflow Counter32, 5277 vcQOverflowHiQ Counter32, 5278 p7p8HiPriQEn INTEGER, 5279 p7p8HiPriQ Counter32, 5280 linkAirDelayns INTEGER, 5281 linkQualityAPData DisplayString, 5282 linkManagementIP IpAddress, 5283 linkFragmentsReceived1XVertical Counter32, 5284 linkFragmentsReceived2XVertical Counter32, 5285 linkFragmentsReceived3XVertical Counter32, 5286 linkFragmentsReceived4XVertical Counter32, 5287 signalToNoiseRatioVertical INTEGER, 5288 radiusReplyMsg DisplayString, 5289 autoUpdateStatus INTEGER, 5290 radiusFramedIPAddress IpAddress, 5291 radiusFramedIPNetmask IpAddress, 5292 radiusDefaultGateway IpAddress, 5293 linkFragmentsReceived1XHorizontal Counter32, 5294 linkFragmentsReceived2XHorizontal Counter32, 5295 linkFragmentsReceived3XHorizontal Counter32, 5296 linkFragmentsReceived4XHorizontal Counter32, 5297 signalToNoiseRatioHorizontal INTEGER, 5298 linkSignalStrengthRatio DisplayString, 5299 linkRadioDbmHorizontal DisplayString, 5300 linkRadioDbmVertical DisplayString, 5301 maxSMTxPwr INTEGER, 5302 productType INTEGER, 5303 linkAdaptRateLowPri INTEGER, 5304 linkAdaptRateHighPri INTEGER, 5305 avgPowerLevelInt INTEGER, 5306 mimoPowerLevelVertical INTEGER, 5307 mimoPowerLevelHorizontal INTEGER, 5308 linkSwVersion DisplayString, 5309 spatialFrequency INTEGER 5310 } 5311 5312 linkLUID OBJECT-TYPE 5313 SYNTAX INTEGER (2..239) 5314 MAX-ACCESS read-only 5315 STATUS current 5316 DESCRIPTION 5317 "LUID number." 5318 ::={whispLinkEntry 1} 5319 5320 linkDescr OBJECT-TYPE 5321 SYNTAX DisplayString 5322 MAX-ACCESS read-only 5323 STATUS current 5324 DESCRIPTION 5325 "A textual string containing information about the 5326 unit. This string should include the name of 5327 the manufacturer, the product name and the version 5328 of the hardware interface." 5329 ::={whispLinkEntry 2} 5330 5331 linkPhysAddress OBJECT-TYPE 5332 SYNTAX PhysAddress 5333 MAX-ACCESS read-only 5334 STATUS current 5335 DESCRIPTION 5336 "Physical Address of the unit." 5337 ::={whispLinkEntry 3} 5338 5339 linkMtu OBJECT-TYPE 5340 SYNTAX INTEGER 5341 MAX-ACCESS read-only 5342 STATUS current 5343 DESCRIPTION 5344 "The size of the largest datagram which can be 5345 sent/received on the interface, specified in 5346 octets. For interfaces that are used for 5347 transmitting network datagrams, this is the size 5348 of the largest network datagram that can be sent 5349 on the interface." 5350 ::={whispLinkEntry 4} 5351 5352 linkSpeed OBJECT-TYPE 5353 SYNTAX Gauge32 5354 MAX-ACCESS read-only 5355 STATUS current 5356 DESCRIPTION 5357 "An estimate of the interface's current bandwidth 5358 in bits per second. For interfaces which do not 5359 vary in bandwidth or for those where no accurate 5360 estimation can be made, this object should contain 5361 the nominal bandwidth." 5362 ::={whispLinkEntry 5} 5363 5364 linkOperStatus OBJECT-TYPE 5365 SYNTAX INTEGER { 5366 up(1), 5367 down(2), 5368 testing(3)} 5369 MAX-ACCESS read-only 5370 STATUS obsolete 5371 DESCRIPTION 5372 "This variable is not used." 5373 ::={whispLinkEntry 6} 5374 5375 linkInOctets OBJECT-TYPE 5376 SYNTAX Counter32 5377 MAX-ACCESS read-only 5378 STATUS current 5379 DESCRIPTION 5380 "The total number of octets received on the 5381 interface, including framing characters." 5382 ::={whispLinkEntry 7} 5383 5384 linkInUcastPkts OBJECT-TYPE 5385 SYNTAX Counter32 5386 MAX-ACCESS read-only 5387 STATUS current 5388 DESCRIPTION 5389 "The number of subnetwork-unicast packets 5390 delivered to a higher-layer protocol." 5391 ::={whispLinkEntry 8} 5392 5393 linkInNUcastPkts OBJECT-TYPE 5394 SYNTAX Counter32 5395 MAX-ACCESS read-only 5396 STATUS current 5397 DESCRIPTION 5398 "The number of non-unicast (i.e., subnetwork- 5399 broadcast or subnetwork-multicast) packets 5400 delivered to a higher-layer protocol." 5401 ::={whispLinkEntry 9} 5402 5403 linkInDiscards OBJECT-TYPE 5404 SYNTAX Counter32 5405 MAX-ACCESS read-only 5406 STATUS current 5407 DESCRIPTION 5408 "The number of inbound packets which were chosen 5409 to be discarded even though no errors had been 5410 detected to prevent their being deliverable to a 5411 higher-layer protocol. One possible reason for 5412 discarding such a packet could be to free up 5413 buffer space." 5414 ::={whispLinkEntry 10} 5415 5416 linkInError OBJECT-TYPE 5417 SYNTAX Counter32 5418 MAX-ACCESS read-only 5419 STATUS current 5420 DESCRIPTION 5421 "The number of inbound packets that contained 5422 errors preventing them from being deliverable to a 5423 higher-layer protocol." 5424 ::={whispLinkEntry 11} 5425 5426 linkInUnknownProtos OBJECT-TYPE 5427 SYNTAX Counter32 5428 MAX-ACCESS read-only 5429 STATUS current 5430 DESCRIPTION 5431 "The number of packets received via the interface 5432 which were discarded because of an unknown or 5433 unsupported protocol." 5434 ::={whispLinkEntry 12} 5435 5436 linkOutOctets OBJECT-TYPE 5437 SYNTAX Counter32 5438 MAX-ACCESS read-only 5439 STATUS current 5440 DESCRIPTION 5441 "The total number of octets transmitted out of the 5442 interface, including framing characters." 5443 ::={whispLinkEntry 13} 5444 5445 linkOutUcastPkts OBJECT-TYPE 5446 SYNTAX Counter32 5447 MAX-ACCESS read-only 5448 STATUS current 5449 DESCRIPTION 5450 "The total number of packets that higher-level 5451 protocols requested be transmitted to a 5452 subnetwork-unicast address, including those that 5453 were discarded or not sent." 5454 ::={whispLinkEntry 14} 5455 5456 linkOutNUcastPkts OBJECT-TYPE 5457 SYNTAX Counter32 5458 MAX-ACCESS read-only 5459 STATUS current 5460 DESCRIPTION 5461 "The total number of packets that higher-level 5462 protocols requested be transmitted to a non- 5463 unicast (i.e., a subnetwork-broadcast or 5464 subnetwork-multicast) address, including those 5465 that were discarded or not sent." 5466 ::={whispLinkEntry 15} 5467 5468 linkOutDiscards OBJECT-TYPE 5469 SYNTAX Counter32 5470 MAX-ACCESS read-only 5471 STATUS current 5472 DESCRIPTION 5473 "The number of outbound packets which were chosen 5474 to be discarded even though no errors had been 5475 detected to prevent their being transmitted. One 5476 possible reason for discarding such a packet could 5477 be to free up buffer space." 5478 ::={whispLinkEntry 16} 5479 5480 linkOutError OBJECT-TYPE 5481 SYNTAX Counter32 5482 MAX-ACCESS read-only 5483 STATUS current 5484 DESCRIPTION 5485 "The number of outbound packets that could not be 5486 transmitted because of errors." 5487 ::={whispLinkEntry 17} 5488 5489 linkOutQLen OBJECT-TYPE 5490 SYNTAX Gauge32 5491 MAX-ACCESS read-only 5492 STATUS current 5493 DESCRIPTION 5494 "Number of packets in output packet queue." 5495 ::={whispLinkEntry 18} 5496 5497 linkSessState OBJECT-TYPE 5498 SYNTAX INTEGER { 5499 idle(0), 5500 inSession(1), 5501 clearing(2), 5502 reRegDnRst(3), 5503 authChal(4), 5504 registering(5), 5505 notInUse(6)} 5506 MAX-ACCESS read-only 5507 STATUS current 5508 DESCRIPTION 5509 "Current operational state of an interface. 5510 0 = Idle 5511 1 = In Session 5512 2 = Clearing 5513 3 = Re-registration downlink reset 5514 4 = Authentication Challenge 5515 5 = Registering 5516 6 = Not in use" 5517 ::={whispLinkEntry 19} 5518 5519 linkESN OBJECT-TYPE 5520 SYNTAX PhysAddress 5521 MAX-ACCESS read-only 5522 STATUS current 5523 DESCRIPTION 5524 "Link Electronic serial number. It is MAC address." 5525 ::={whispLinkEntry 20} 5526 5527 linkRSSI OBJECT-TYPE 5528 SYNTAX INTEGER 5529 MAX-ACCESS read-only 5530 STATUS current 5531 DESCRIPTION 5532 "The average RSSI reading of all packets received from an SM. Applicable to FSK radios only." 5533 ::={whispLinkEntry 21} 5534 5535 linkAveJitter OBJECT-TYPE 5536 SYNTAX Gauge32 (0..15) 5537 MAX-ACCESS read-only 5538 STATUS current 5539 DESCRIPTION 5540 "The average Jitter reading of all packets received from an SM. Applicable to FSK radios only." 5541 ::={whispLinkEntry 22} 5542 5543 linkLastJitter OBJECT-TYPE 5544 SYNTAX Gauge32 (0..15) 5545 MAX-ACCESS read-only 5546 STATUS current 5547 DESCRIPTION 5548 "Last jitter value. Applicable to FSK radios only." 5549 ::={whispLinkEntry 23} 5550 5551 linkAirDelay OBJECT-TYPE 5552 SYNTAX INTEGER 5553 MAX-ACCESS read-only 5554 STATUS current 5555 DESCRIPTION 5556 "The current round trip air delay in bits measured between the AP and SM." 5557 ::={whispLinkEntry 24} 5558 5559 linkRegCount OBJECT-TYPE 5560 SYNTAX INTEGER 5561 MAX-ACCESS read-only 5562 STATUS current 5563 DESCRIPTION 5564 "The number of times an SM has registered to an AP." 5565 ::={whispLinkEntry 25} 5566 5567 linkReRegCount OBJECT-TYPE 5568 SYNTAX INTEGER 5569 MAX-ACCESS read-only 5570 STATUS current 5571 DESCRIPTION 5572 "The number of times an SM has tried to register with the AP while it still has 5573 an active session with the AP." 5574 ::={whispLinkEntry 26} 5575 5576 linkTimeOut OBJECT-TYPE 5577 SYNTAX INTEGER 5578 MAX-ACCESS read-only 5579 STATUS current 5580 DESCRIPTION 5581 "Link time out." 5582 ::={whispLinkEntry 27} 5583 5584 linkLastRSSI OBJECT-TYPE 5585 SYNTAX INTEGER 5586 MAX-ACCESS read-only 5587 STATUS current 5588 DESCRIPTION 5589 "The last RSSI reading of all packets received from an SM. Applicable to FSK radios only." 5590 ::={whispLinkEntry 28} 5591 5592 sessionCount OBJECT-TYPE 5593 SYNTAX INTEGER 5594 MAX-ACCESS read-only 5595 STATUS current 5596 DESCRIPTION 5597 "How many times has this mac been in/out of session." 5598 ::={whispLinkEntry 29} 5599 5600 softwareVersion OBJECT-TYPE 5601 SYNTAX DisplayString 5602 MAX-ACCESS read-only 5603 STATUS current 5604 DESCRIPTION 5605 "The software version of registered SM." 5606 ::={whispLinkEntry 30} 5607 5608 softwareBootVersion OBJECT-TYPE 5609 SYNTAX DisplayString 5610 MAX-ACCESS read-only 5611 STATUS current 5612 DESCRIPTION 5613 "The software boot version of registered SM." 5614 ::={whispLinkEntry 31} 5615 5616 fpgaVersion OBJECT-TYPE 5617 SYNTAX DisplayString 5618 MAX-ACCESS read-only 5619 STATUS current 5620 DESCRIPTION 5621 "The FPGA version of registered SM." 5622 ::={whispLinkEntry 32} 5623 5624 linkSiteName OBJECT-TYPE 5625 SYNTAX DisplayString 5626 MAX-ACCESS read-only 5627 STATUS current 5628 DESCRIPTION 5629 "The site name of the registered SM." 5630 ::={whispLinkEntry 33} 5631 5632 avgPowerLevel OBJECT-TYPE 5633 SYNTAX DisplayString 5634 MAX-ACCESS read-only 5635 STATUS current 5636 DESCRIPTION 5637 "The average power level of registered SM. 5638 For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM 5639 until new packets are received from the SM with it transmitting at its new power level. 5640 For MIMO this is the combined receive power." 5641 ::={whispLinkEntry 34} 5642 5643 lastPowerLevel OBJECT-TYPE 5644 SYNTAX DisplayString 5645 MAX-ACCESS read-only 5646 STATUS current 5647 DESCRIPTION 5648 "The last power level of registered SM. 5649 For MIMO radios this is the combined receive power." 5650 ::={whispLinkEntry 35} 5651 5652 sesDownLinkRate OBJECT-TYPE 5653 SYNTAX INTEGER 5654 MAX-ACCESS read-only 5655 STATUS current 5656 DESCRIPTION 5657 "Down link rate." 5658 ::={whispLinkEntry 36} 5659 5660 sesDownLinkLimit OBJECT-TYPE 5661 SYNTAX INTEGER 5662 MAX-ACCESS read-only 5663 STATUS current 5664 DESCRIPTION 5665 "Down link limit." 5666 ::={whispLinkEntry 37} 5667 5668 sesUpLinkRate OBJECT-TYPE 5669 SYNTAX INTEGER 5670 MAX-ACCESS read-only 5671 STATUS current 5672 DESCRIPTION 5673 "Uplink rate." 5674 ::={whispLinkEntry 38} 5675 5676 sesUpLinkLimit OBJECT-TYPE 5677 SYNTAX INTEGER 5678 MAX-ACCESS read-only 5679 STATUS current 5680 DESCRIPTION 5681 "Uplink limit." 5682 ::={whispLinkEntry 39} 5683 5684 adaptRate OBJECT-TYPE 5685 SYNTAX DisplayString 5686 MAX-ACCESS read-only 5687 STATUS current 5688 DESCRIPTION 5689 "Adapt rate of registered SM." 5690 ::={whispLinkEntry 40} 5691 5692 sesLoUpCIR OBJECT-TYPE 5693 SYNTAX INTEGER 5694 MAX-ACCESS read-only 5695 STATUS current 5696 DESCRIPTION 5697 "Low priority up link CIR." 5698 ::={whispLinkEntry 41} 5699 5700 sesLoDownCIR OBJECT-TYPE 5701 SYNTAX INTEGER 5702 MAX-ACCESS read-only 5703 STATUS current 5704 DESCRIPTION 5705 "Low priority down link CIR." 5706 ::={whispLinkEntry 42} 5707 5708 sesHiUpCIR OBJECT-TYPE 5709 SYNTAX INTEGER 5710 MAX-ACCESS read-only 5711 STATUS current 5712 DESCRIPTION 5713 "High priority up link CIR." 5714 ::={whispLinkEntry 43} 5715 5716 sesHiDownCIR OBJECT-TYPE 5717 SYNTAX INTEGER 5718 MAX-ACCESS read-only 5719 STATUS current 5720 DESCRIPTION 5721 "High priority down link CIR." 5722 ::={whispLinkEntry 44} 5723 5724 platformVer OBJECT-TYPE 5725 SYNTAX INTEGER 5726 MAX-ACCESS read-only 5727 STATUS current 5728 DESCRIPTION 5729 "Platform Version." 5730 ::={whispLinkEntry 45} 5731 5732 smSessionTmr OBJECT-TYPE 5733 SYNTAX TimeTicks 5734 MAX-ACCESS read-only 5735 STATUS current 5736 DESCRIPTION 5737 "SM session uptime" 5738 ::={whispLinkEntry 46} 5739 5740 smSessionSeqNumMismatch OBJECT-TYPE 5741 SYNTAX Counter32 5742 MAX-ACCESS read-only 5743 STATUS current 5744 DESCRIPTION 5745 "The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication 5746 challenge and authentication response messages. This status is only valid in a system where encryption is 5747 enabled and no authentication server is configured." 5748 ::={whispLinkEntry 47} 5749 5750 dataVCNum OBJECT-TYPE 5751 SYNTAX INTEGER 5752 MAX-ACCESS read-only 5753 STATUS current 5754 DESCRIPTION 5755 "The normal priority Data VC number in use for this link." 5756 ::={whispLinkEntry 48} 5757 5758 hiPriQEn OBJECT-TYPE 5759 SYNTAX INTEGER { 5760 disabled(0), 5761 enabled(1)} 5762 MAX-ACCESS read-only 5763 STATUS current 5764 DESCRIPTION 5765 "Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios." 5766 ::={whispLinkEntry 49} 5767 5768 dataVCNumHiQ OBJECT-TYPE 5769 SYNTAX INTEGER 5770 MAX-ACCESS read-only 5771 STATUS current 5772 DESCRIPTION 5773 "The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place." 5774 ::={whispLinkEntry 50} 5775 5776 linkInOctetsHiQ OBJECT-TYPE 5777 SYNTAX Counter32 5778 MAX-ACCESS read-only 5779 STATUS current 5780 DESCRIPTION 5781 "The total number of octets received on High Priority Queue, including framing characters." 5782 ::={whispLinkEntry 51} 5783 5784 linkInUcastPktsHiQ OBJECT-TYPE 5785 SYNTAX Counter32 5786 MAX-ACCESS read-only 5787 STATUS current 5788 DESCRIPTION 5789 "The number of subnetwork-unicast packets on High Priority Queue 5790 delivered to a higher-layer protocol." 5791 ::={whispLinkEntry 52} 5792 5793 linkInNUcastPktsHiQ OBJECT-TYPE 5794 SYNTAX Counter32 5795 MAX-ACCESS read-only 5796 STATUS current 5797 DESCRIPTION 5798 "The number of non-unicast (i.e., subnetwork- 5799 broadcast or subnetwork-multicast) packets on High Priority Queue 5800 delivered to a higher-layer protocol." 5801 ::={whispLinkEntry 53} 5802 5803 linkInDiscardsHiQ OBJECT-TYPE 5804 SYNTAX Counter32 5805 MAX-ACCESS read-only 5806 STATUS current 5807 DESCRIPTION 5808 "The number of inbound packets on High Priority Queue which were chosen 5809 to be discarded even though no errors had been 5810 detected to prevent their being deliverable to a 5811 higher-layer protocol. One possible reason for 5812 discarding such a packet could be to free up 5813 buffer space." 5814 ::={whispLinkEntry 54} 5815 5816 linkInErrorHiQ OBJECT-TYPE 5817 SYNTAX Counter32 5818 MAX-ACCESS read-only 5819 STATUS current 5820 DESCRIPTION 5821 "The number of inbound packets on High Priority Queue that contained 5822 errors preventing them from being deliverable to a 5823 higher-layer protocol." 5824 ::={whispLinkEntry 55} 5825 5826 linkInUnknownProtosHiQ OBJECT-TYPE 5827 SYNTAX Counter32 5828 MAX-ACCESS read-only 5829 STATUS current 5830 DESCRIPTION 5831 "The number of packets received on High Priority Queue via the interface 5832 which were discarded because of an unknown or 5833 unsupported protocol." 5834 ::={whispLinkEntry 56} 5835 5836 linkOutOctetsHiQ OBJECT-TYPE 5837 SYNTAX Counter32 5838 MAX-ACCESS read-only 5839 STATUS current 5840 DESCRIPTION 5841 "The total number of octets on High Priority Queue transmitted out of the 5842 interface, including framing characters." 5843 ::={whispLinkEntry 57} 5844 5845 linkOutUcastPktsHiQ OBJECT-TYPE 5846 SYNTAX Counter32 5847 MAX-ACCESS read-only 5848 STATUS current 5849 DESCRIPTION 5850 "The total number of packets on High Priority Queue that higher-level 5851 protocols requested be transmitted to a 5852 subnetwork-unicast address, including those that 5853 were discarded or not sent." 5854 ::={whispLinkEntry 58} 5855 5856 linkOutNUcastPktsHiQ OBJECT-TYPE 5857 SYNTAX Counter32 5858 MAX-ACCESS read-only 5859 STATUS current 5860 DESCRIPTION 5861 "The total number of packets on High Priority Queue that higher-level 5862 protocols requested be transmitted to a non- 5863 unicast (i.e., a subnetwork-broadcast or 5864 subnetwork-multicast) address, including those 5865 that were discarded or not sent." 5866 ::={whispLinkEntry 59} 5867 5868 linkOutDiscardsHiQ OBJECT-TYPE 5869 SYNTAX Counter32 5870 MAX-ACCESS read-only 5871 STATUS current 5872 DESCRIPTION 5873 "The number of outbound packets on High Priority Queue which were chosen 5874 to be discarded even though no errors had been 5875 detected to prevent their being transmitted. One 5876 possible reason for discarding such a packet could 5877 be to free up buffer space." 5878 ::={whispLinkEntry 60} 5879 5880 linkOutErrorHiQ OBJECT-TYPE 5881 SYNTAX Counter32 5882 MAX-ACCESS read-only 5883 STATUS current 5884 DESCRIPTION 5885 "The number of outbound packets on High Priority Queue that could not be 5886 transmitted because of errors." 5887 ::={whispLinkEntry 61} 5888 5889 vcQOverflow OBJECT-TYPE 5890 SYNTAX Counter32 5891 MAX-ACCESS read-only 5892 STATUS current 5893 DESCRIPTION 5894 "The number of packets dropped due to Queue overflow on VC." 5895 ::={whispLinkEntry 62} 5896 5897 vcQOverflowHiQ OBJECT-TYPE 5898 SYNTAX Counter32 5899 MAX-ACCESS read-only 5900 STATUS current 5901 DESCRIPTION 5902 "The number of packets dropped due to Queue overflow on High Priority VC, if enabled." 5903 ::={whispLinkEntry 63} 5904 5905 p7p8HiPriQEn OBJECT-TYPE 5906 SYNTAX INTEGER { 5907 disabled-or-NA(0), 5908 enabled(1)} 5909 MAX-ACCESS read-only 5910 STATUS current 5911 DESCRIPTION 5912 "Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always." 5913 ::={whispLinkEntry 64} 5914 5915 p7p8HiPriQ OBJECT-TYPE 5916 SYNTAX Counter32 5917 MAX-ACCESS read-only 5918 STATUS current 5919 DESCRIPTION 5920 "Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0." 5921 ::={whispLinkEntry 65} 5922 5923 linkAirDelayns OBJECT-TYPE 5924 SYNTAX INTEGER 5925 MAX-ACCESS read-only 5926 STATUS current 5927 DESCRIPTION 5928 "The current round trip air delay in nanoseconds measured between the AP and SM." 5929 ::={whispLinkEntry 66} 5930 5931 linkQualityAPData OBJECT-TYPE 5932 SYNTAX DisplayString 5933 MAX-ACCESS read-only 5934 STATUS current 5935 DESCRIPTION 5936 "Engineering use only. 5937 The current link quality of the SM's data from the AP. 5938 This is relative to the current modulation rate (1X, 2X, 3X, etc)." 5939 ::={whispLinkEntry 67} 5940 5941 linkManagementIP OBJECT-TYPE 5942 SYNTAX IpAddress 5943 MAX-ACCESS read-only 5944 STATUS current 5945 DESCRIPTION 5946 "Management IP Address of the unit. 0 indicates SM is not publically addressable." 5947 ::={whispLinkEntry 69} 5948 5949 linkFragmentsReceived1XVertical OBJECT-TYPE 5950 SYNTAX Counter32 5951 MAX-ACCESS read-only 5952 STATUS current 5953 DESCRIPTION 5954 "Engineering use only. 5955 Number of fragments received in 1x (QPSK) modulation. 5956 For GenII OFDM and forward. 5957 For MIMO this is the vertical path." 5958 ::={whispLinkEntry 70} 5959 5960 linkFragmentsReceived2XVertical OBJECT-TYPE 5961 SYNTAX Counter32 5962 MAX-ACCESS read-only 5963 STATUS current 5964 DESCRIPTION 5965 "Engineering use only. 5966 Number of fragments received in 2x (16-QAM) modulation. 5967 For GenII OFDM and forward. 5968 For MIMO this is the vertical path." 5969 ::={whispLinkEntry 71} 5970 5971 linkFragmentsReceived3XVertical OBJECT-TYPE 5972 SYNTAX Counter32 5973 MAX-ACCESS read-only 5974 STATUS current 5975 DESCRIPTION 5976 "Engineering use only. 5977 Number of fragments received in 3x (64-QAM) modulation. 5978 For GenII OFDM and forward. 5979 For MIMO this is the vertical path." 5980 ::={whispLinkEntry 72} 5981 5982 linkFragmentsReceived4XVertical OBJECT-TYPE 5983 SYNTAX Counter32 5984 MAX-ACCESS read-only 5985 STATUS current 5986 DESCRIPTION 5987 "Engineering use only. 5988 Number of fragments received in 4x (256-QAM) modulation. 5989 For GenII OFDM and forward. 5990 For MIMO this is the vertical path." 5991 ::={whispLinkEntry 73} 5992 5993 signalToNoiseRatioVertical OBJECT-TYPE 5994 SYNTAX INTEGER 5995 MAX-ACCESS read-only 5996 STATUS current 5997 DESCRIPTION 5998 "Estimate of the receive signal to noise ratio in dB. 5999 For GenII OFDM and forward. 6000 For MIMO this is the vertical path." 6001 ::={whispLinkEntry 74} 6002 6003 radiusReplyMsg OBJECT-TYPE 6004 SYNTAX DisplayString 6005 MAX-ACCESS read-only 6006 STATUS current 6007 DESCRIPTION 6008 "The RADIUS Reply-Msg populated for the SM. 6009 This is only valid when using a backen AAA server." 6010 ::={whispLinkEntry 75} 6011 6012 autoUpdateStatus OBJECT-TYPE 6013 SYNTAX INTEGER 6014 MAX-ACCESS read-only 6015 STATUS current 6016 DESCRIPTION 6017 "status of the auto update process" 6018 ::={whispLinkEntry 76} 6019 6020 radiusFramedIPAddress OBJECT-TYPE 6021 SYNTAX IpAddress 6022 MAX-ACCESS read-only 6023 STATUS current 6024 DESCRIPTION 6025 "This Attribute indicates the IP address to be configured for the SM management interface." 6026 ::={whispLinkEntry 77} 6027 6028 radiusFramedIPNetmask OBJECT-TYPE 6029 SYNTAX IpAddress 6030 MAX-ACCESS read-only 6031 STATUS current 6032 DESCRIPTION 6033 "This Attribute indicates the netmask to be configured for the SM management interface." 6034 ::={whispLinkEntry 78} 6035 6036 radiusDefaultGateway OBJECT-TYPE 6037 SYNTAX IpAddress 6038 MAX-ACCESS read-only 6039 STATUS current 6040 DESCRIPTION 6041 "This Attribute indicates the default gateway to be configured for the SM management interface." 6042 ::={whispLinkEntry 79} 6043 6044 linkFragmentsReceived1XHorizontal OBJECT-TYPE 6045 SYNTAX Counter32 6046 MAX-ACCESS read-only 6047 STATUS current 6048 DESCRIPTION 6049 "Engineering use only. 6050 Number of fragments received in 1x (QPSK) modulation. 6051 For MIMO only. 6052 For MIMO this is the horizontal path. 6053 If operating in MIMO-A this will return 0." 6054 ::={whispLinkEntry 80} 6055 6056 linkFragmentsReceived2XHorizontal OBJECT-TYPE 6057 SYNTAX Counter32 6058 MAX-ACCESS read-only 6059 STATUS current 6060 DESCRIPTION 6061 "Engineering use only. 6062 Number of fragments received in 2x (16-QAM) modulation. 6063 For MIMO only. 6064 For MIMO this is the horizontal path. 6065 If operating in MIMO-A this will return 0." 6066 ::={whispLinkEntry 81} 6067 6068 linkFragmentsReceived3XHorizontal OBJECT-TYPE 6069 SYNTAX Counter32 6070 MAX-ACCESS read-only 6071 STATUS current 6072 DESCRIPTION 6073 "Engineering use only. 6074 Number of fragments received in 3x (64-QAM) modulation. 6075 For MIMO only. 6076 For MIMO this is the horizontal path. 6077 If operating in MIMO-A this will return 0." 6078 ::={whispLinkEntry 82} 6079 6080 linkFragmentsReceived4XHorizontal OBJECT-TYPE 6081 SYNTAX Counter32 6082 MAX-ACCESS read-only 6083 STATUS current 6084 DESCRIPTION 6085 "Engineering use only. 6086 Number of fragments received in 4x (256-QAM) modulation. 6087 For MIMO only. 6088 For MIMO this is the horizontal path. 6089 If operating in MIMO-A this will return 0." 6090 ::={whispLinkEntry 83} 6091 6092 signalToNoiseRatioHorizontal OBJECT-TYPE 6093 SYNTAX INTEGER 6094 MAX-ACCESS read-only 6095 STATUS current 6096 DESCRIPTION 6097 "Estimate of the receive signal to noise ratio in dB. 6098 MIMO radios only. 6099 For MIMO this is the horizontal path. 6100 If operating in MIMO-A this will return 0." 6101 ::={whispLinkEntry 84} 6102 6103 linkSignalStrengthRatio OBJECT-TYPE 6104 SYNTAX DisplayString 6105 MAX-ACCESS read-only 6106 STATUS current 6107 DESCRIPTION 6108 "Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - 6109 power received by the horizontal antenna input (dB). 6110 MIMO radios only." 6111 ::={whispLinkEntry 86} 6112 6113 linkRadioDbmHorizontal OBJECT-TYPE 6114 SYNTAX DisplayString 6115 MAX-ACCESS read-only 6116 STATUS current 6117 DESCRIPTION 6118 "Receive power level of the horizontal antenna in dBm. 6119 MIMO radios only." 6120 ::={whispLinkEntry 87} 6121 6122 linkRadioDbmVertical OBJECT-TYPE 6123 SYNTAX DisplayString 6124 MAX-ACCESS read-only 6125 STATUS current 6126 DESCRIPTION 6127 "Receive power level of the vertical antenna in dBm. 6128 MIMO radios only." 6129 ::={whispLinkEntry 88} 6130 6131 maxSMTxPwr OBJECT-TYPE 6132 SYNTAX INTEGER 6133 MAX-ACCESS read-only 6134 STATUS current 6135 DESCRIPTION 6136 "Returns whether SM is transmitting at its configured max power level." 6137 ::={whispLinkEntry 89} 6138 6139 productType OBJECT-TYPE 6140 SYNTAX INTEGER { 6141 unknown(0), 6142 pmp450MIMOOFDM(1), 6143 pmp430SISOOFDM(2), 6144 pmp450SISOOFDM(3), 6145 ptp450(4), 6146 pmp450i(5), 6147 ptp450i(6), 6148 pmp450b(7), 6149 ptp450b(8)} 6150 MAX-ACCESS read-only 6151 STATUS current 6152 DESCRIPTION 6153 "Returns which type of product the SM/BHS is. 6154 450 platform only." 6155 ::={whispLinkEntry 90} 6156 6157 linkAdaptRateLowPri OBJECT-TYPE 6158 SYNTAX INTEGER { 6159 noSession(0), 6160 rate1X(1), 6161 rate2X(2), 6162 rete3X(3), 6163 rate4X(4), 6164 rate6X(6), 6165 rate8X(8)} 6166 MAX-ACCESS read-only 6167 STATUS current 6168 DESCRIPTION 6169 "The current transmitting rate of the low priority VC. 6170 0 : SM is not in session 6171 1 : 1X QPSK SISO 6172 2 : 2X 16-QAM SISO or QPSK MIMO 6173 3 : 3X 64-QAM SISO 6174 4 : 4X 256-QAM SISO or 16-QAM MIMO 6175 6 : 6X 64-QAM MIMO 6176 8 : 8X 256-QAM MIMO" 6177 ::={whispLinkEntry 91} 6178 6179 linkAdaptRateHighPri OBJECT-TYPE 6180 SYNTAX INTEGER { 6181 noHighPriorityChannel(-1), 6182 noSession(0), 6183 rate1X(1), 6184 rate2X(2), 6185 rete3X(3), 6186 rate4X(4), 6187 rate6X(6), 6188 rate8X(8)} 6189 MAX-ACCESS read-only 6190 STATUS current 6191 DESCRIPTION 6192 "The current transmitting rate of the high priority VC. 6193 -1 : High Priority Channel not configured 6194 0 : SM is not in session 6195 1 : 1X QPSK SISO 6196 2 : 2X 16-QAM SISO or QPSK MIMO 6197 3 : 3X 64-QAM SISO 6198 4 : 4X 256-QAM SISO or 16-QAM MIMO 6199 6 : 6X 64-QAM MIMO 6200 8 : 8X 256-QAM MIMO" 6201 ::={whispLinkEntry 92} 6202 6203 avgPowerLevelInt OBJECT-TYPE 6204 SYNTAX INTEGER 6205 MAX-ACCESS read-only 6206 STATUS current 6207 DESCRIPTION 6208 "The average power level of registered SM as Integer. 6209 For systems that support power control, this value can read '0' when the AP adjusts the transmit power of a SM 6210 until new packets are received from the SM with it transmitting at its new power level. 6211 For MIMO this is the combined receive power." 6212 ::={whispLinkEntry 93} 6213 6214 mimoPowerLevelVertical OBJECT-TYPE 6215 SYNTAX INTEGER 6216 MAX-ACCESS read-only 6217 STATUS current 6218 DESCRIPTION 6219 "For MIMO radios, the Vertical power level of registered SM as Integer. 6220 The Vertical Power (+45) level in case of 2.4GHz Dual slant MIMO" 6221 ::={whispLinkEntry 94} 6222 6223 mimoPowerLevelHorizontal OBJECT-TYPE 6224 SYNTAX INTEGER 6225 MAX-ACCESS read-only 6226 STATUS current 6227 DESCRIPTION 6228 "For MIMO radios, the Horizontal power level of registered SM as Integer. 6229 The Horizontal Power(-45) level in case of 2.4GHz Dual slant MIMO" 6230 ::={whispLinkEntry 95} 6231 6232 linkSwVersion OBJECT-TYPE 6233 SYNTAX DisplayString 6234 MAX-ACCESS read-only 6235 STATUS current 6236 DESCRIPTION 6237 "The swversion of registered SM, to be used internally." 6238 ::={whispLinkEntry 96} 6239 6240 spatialFrequency OBJECT-TYPE 6241 SYNTAX INTEGER 6242 MAX-ACCESS read-only 6243 STATUS current 6244 DESCRIPTION 6245 "The spatial frequency of registered SM. 6246 Spatial Frequency is the phase advance of the wavefront from one antenna column 6247 to the next caused by the angle at which the wavefront impinges on the array. 6248 It is represented in integer units, with 1024 equating to 360 degrees per column. 6249 A value of 2048 is used to signify a spatial frequency that is not yet known or otherwise invalid. 6250 PMP 450m only." 6251 ::={whispLinkEntry 97} 6252 6253 whispFailedRegTable OBJECT-TYPE 6254 SYNTAX SEQUENCE OF WhispFailedRegEntry 6255 MAX-ACCESS not-accessible 6256 STATUS current 6257 DESCRIPTION 6258 "List of link test results" 6259 ::= {whispAps 8} 6260 6261 whispFailedRegEntry OBJECT-TYPE 6262 SYNTAX WhispFailedRegEntry 6263 MAX-ACCESS not-accessible 6264 STATUS current 6265 DESCRIPTION 6266 "List of Failed ESNs" 6267 INDEX {regFailSeqNum} 6268 ::= {whispFailedRegTable 1} 6269 6270 WhispFailedRegEntry ::= SEQUENCE{ 6271 regFailSeqNum Counter32, 6272 regFailESN PhysAddress, 6273 regGrantReason INTEGER, 6274 regFailTime TimeTicks, 6275 regFailReasonText DisplayString 6276 } 6277 6278 regGrantReason OBJECT-TYPE 6279 SYNTAX INTEGER { 6280 reggnt-valid(0), 6281 reggnt-outofrange(1), 6282 reggnt-nolUIDS(2), 6283 reggnt-rerange(3), 6284 reggnt-authfail(4), 6285 reggnt-encryptfail(5), 6286 reggnt-poweradjust(6), 6287 reggnt-novcs(7), 6288 reggnt-failvcreserve(8), 6289 reggnt-failvcactive(9), 6290 reggnt-failhivcdata(10), 6291 reggnt-failsmlimit(11), 6292 reggnt-fail95orabove(12)} 6293 MAX-ACCESS read-only 6294 STATUS current 6295 DESCRIPTION 6296 "The registration failure reason" 6297 ::={whispFailedRegEntry 1} 6298 6299 regFailESN OBJECT-TYPE 6300 SYNTAX PhysAddress 6301 MAX-ACCESS read-only 6302 STATUS current 6303 DESCRIPTION 6304 "The ESN that failed to register" 6305 ::={whispFailedRegEntry 2} 6306 6307 regFailTime OBJECT-TYPE 6308 SYNTAX TimeTicks 6309 MAX-ACCESS read-only 6310 STATUS current 6311 DESCRIPTION 6312 "The number of ticks that occurred when the ESN failed to register" 6313 ::={whispFailedRegEntry 3} 6314 6315 regFailSeqNum OBJECT-TYPE 6316 SYNTAX Counter32 6317 MAX-ACCESS read-only 6318 STATUS current 6319 DESCRIPTION 6320 "The sequence when the register failure was given." 6321 ::={whispFailedRegEntry 4} 6322 6323 regFailReasonText OBJECT-TYPE 6324 SYNTAX DisplayString 6325 MAX-ACCESS read-only 6326 STATUS current 6327 DESCRIPTION 6328 "The text description of the failure." 6329 ::={whispFailedRegEntry 5} 6330 6331 6332END 6333