1
2-- *****************************************************************************
3-- Juniper-ATM-CONF
4--
5-- SNMP Agent Capabilities definitions for the ATM MIBs.
6--
7-- Copyright (c) 2001, 2002 Unisphere Networks, Inc.
8-- Copyright (c) 2002-2005 Juniper Networks, Inc.
9--   All rights reserved.
10-- *****************************************************************************
11
12Juniper-ATM-CONF  DEFINITIONS ::= BEGIN
13
14IMPORTS
15    MODULE-IDENTITY
16        FROM SNMPv2-SMI
17    AGENT-CAPABILITIES
18        FROM SNMPv2-CONF
19    juniAgents
20        FROM Juniper-Agents;
21
22juniAtmAgent  MODULE-IDENTITY
23    LAST-UPDATED "200508171726Z"  -- 17-Aug-05 01:26 PM EDT
24    ORGANIZATION "Juniper Networks, Inc."
25    CONTACT-INFO
26        "       Juniper Networks, Inc.
27        Postal: 10 Technology Park Drive
28                Westford, MA  01886-3146
29                USA
30        Tel:    +1 978 589 5800
31        E-mail: mib@Juniper.net"
32    DESCRIPTION
33        "Juniper-UNI-ATM-MIB:
34         The agent capabilities definitions for the ATM component of the SNMP
35         agent in the Juniper E-series family of products."
36    -- Revision History
37    REVISION    "200508171726Z"  -- 17-Aug-05 01:26 PM EDT  - JUNOSe 7.3
38    DESCRIPTION
39        "Juniper-UNI-ATM-MIB:
40         Removed SVC support.
41         ATM2-MIB:
42         Removed SVC support."
43    REVISION    "200502172315Z"  -- 17-Feb-05 06:15 PM EST  - JUNOSe 7.1
44    DESCRIPTION
45        "Juniper-UNI-ATM-MIB:
46         Added circuit OAM support to the ATM VCC end point agent capabilities."
47    REVISION    "200401061953Z"  -- 06-Jan-04 02:53 PM EST  - JUNOSe 5.3
48    DESCRIPTION
49        "Added support to export the subinterface description to the line
50         cards."
51    REVISION    "200311071457Z"  -- 07-Nov-03 09:57 AM EST  - JUNOSe 5.2
52    DESCRIPTION
53        "ATM2-MIB:
54         Updated from an Internet Draft to a Proposed Standard (RFC 3606).
55         Juniper-UNI-ATM-MIB:
56         Added ATM sub-interface location support."
57    REVISION    "200305081757Z"  -- 08-May-03 01:57 PM EDT  - JUNOSe 5.1
58    DESCRIPTION
59        "Juniper-UNI-ATM-MIB:
60         Added ATM F4 OAM circuits management and ATM VP description support."
61    REVISION    "200209061654Z"  -- 06-Sep-02 12:54 PM EDT  - JUNOSe 5.0
62    DESCRIPTION
63        "Juniper-UNI-ATM-MIB:
64         Replaced Unisphere names with Juniper names."
65    REVISION    "200208091415Z"  -- 09-Aug-02 10:15 AM EDT  - JUNOSe 4.1
66    DESCRIPTION
67        "ATM2-MIB:
68         Added support for the atmSigStatTable, the atmAal5VclStatTable and the
69         atmInterfaceExtTable.
70         Juniper-UNI-ATM-MIB:
71         Added receive bandwith support to CAC.
72         Added E164 public addressing support."
73    REVISION    "200201291518Z"  -- 29-Jan-02 10:18 AM EST  - JUNOSe 4.0
74    DESCRIPTION
75        "Juniper-UNI-ATM-MIB:
76         Added ATM switched virtual connection (SVC) support to the VCC end
77         point capabilities."
78    REVISION    "200201241416Z"  -- 24-Jan-02 09:16 AM EST  - JUNOSe 3.4
79    DESCRIPTION
80        "Juniper-UNI-ATM-MIB:
81         Added support for ATM connection admission control (CAC) to the VCC end
82         point capabilities."
83    REVISION    "200112141951Z"  -- 14-Dec-01 02:51 PM EST  - JUNOSe 3.3
84    DESCRIPTION
85        "Juniper-UNI-ATM-MIB:
86         Added ATM traffic shaping capabilities."
87    REVISION    "200105231612Z"  -- 23-May-01 12:12 PM EDT  - JUNOSe 3.2
88    DESCRIPTION
89        "The initial release of this management information module."
90    ::= { juniAgents 3 }
91
92
93-- *****************************************************************************
94-- ATM VCC end point agent capabilities
95-- *****************************************************************************
96juniAtmVccEndPointAgent  OBJECT IDENTIFIER ::= { juniAtmAgent 1 }
97
98juniAtmVccEndPointAgentV1  AGENT-CAPABILITIES
99    PRODUCT-RELEASE
100        "Version 1 of the ATM VCC end point agent subcomponent of the JUNOSe
101        SNMP agent.  This version of the ATM end point subcomponent was
102        supported in JUNOSe 3.0 and 3.1 system releases."
103    STATUS      obsolete
104    DESCRIPTION
105        "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
106        These capabilities became obsolete when new objects were added to the
107        juniAtmSubIfGroup and support for the atmfM4IfLoopbackLocationCode
108        object was added."
109    SUPPORTS    ATM-MIB
110        INCLUDES {
111            atmInterfaceTCGroup,
112            aal5VccGroup,
113            atmInterfaceConfGroup2,
114            atmVccTerminationGroup2 }
115        VARIATION   atmVclAdminStatus
116            ACCESS      read-only
117            DESCRIPTION
118                "The atmVccTerminationGroup2 is not used for configuring VCCs.
119                Use the Juniper-UNI-ATM-MIB."
120        VARIATION   atmVclReceiveTrafficDescrIndex
121            ACCESS      read-only
122            DESCRIPTION
123                "The atmVccTerminationGroup2 is not used for configuring VCCs.
124                Use the Juniper-UNI-ATM-MIB."
125        VARIATION   atmVclTransmitTrafficDescrIndex
126            ACCESS      read-only
127            DESCRIPTION
128                "The atmVccTerminationGroup2 is not used for configuring VCCs.
129                Use the Juniper-UNI-ATM-MIB."
130        VARIATION   atmVccAalType
131            ACCESS      read-only
132            DESCRIPTION
133                "The atmVccTerminationGroup2 is not used for configuring VCCs.
134                Use the Juniper-UNI-ATM-MIB."
135        VARIATION   atmVclRowStatus
136            ACCESS      read-only
137            DESCRIPTION
138                "The atmVccTerminationGroup2 is not used for configuring VCCs.
139                Use the Juniper-UNI-ATM-MIB."
140        VARIATION   atmVclCastType
141            ACCESS      read-only
142            DESCRIPTION
143                "The atmVccTerminationGroup2 is not used for configuring VCCs.
144                Use the Juniper-UNI-ATM-MIB."
145        VARIATION   atmVclConnKind
146            ACCESS      read-only
147            DESCRIPTION
148                "The atmVccTerminationGroup2 is not used for configuring VCCs.
149                Use the Juniper-UNI-ATM-MIB."
150    SUPPORTS    Juniper-UNI-ATM-MIB
151        INCLUDES {
152            juniAtmGroup,
153            juniAtmAal5Group,
154            juniAtmSubIfGroup }
155    ::= { juniAtmVccEndPointAgent 1 }
156
157juniAtmVccEndPointAgentV2  AGENT-CAPABILITIES
158    PRODUCT-RELEASE
159        "Version 2 of the ATM VCC end point agent subcomponent of the JUNOSe
160        SNMP agent.  This version of the ATM end point subcomponent was
161        supported in JUNOSe 3.2 and JUNOSe 3.3 system releases."
162    STATUS      obsolete
163    DESCRIPTION
164        "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
165        These capabilities became obsolete when support was added to the
166        Juniper-UNI-ATM-MIB for connection admission control (CAC)."
167    SUPPORTS    ATM-MIB
168        INCLUDES {
169            atmInterfaceTCGroup,
170            aal5VccGroup,
171            atmInterfaceConfGroup2,
172            atmVccTerminationGroup2 }
173        VARIATION   atmVclAdminStatus
174            ACCESS      read-only
175            DESCRIPTION
176                "The atmVccTerminationGroup2 is not used for configuring VCCs.
177                Use the Juniper-UNI-ATM-MIB."
178        VARIATION   atmVclReceiveTrafficDescrIndex
179            ACCESS      read-only
180            DESCRIPTION
181                "The atmVccTerminationGroup2 is not used for configuring VCCs.
182                Use the Juniper-UNI-ATM-MIB."
183        VARIATION   atmVclTransmitTrafficDescrIndex
184            ACCESS      read-only
185            DESCRIPTION
186                "The atmVccTerminationGroup2 is not used for configuring VCCs.
187                Use the Juniper-UNI-ATM-MIB."
188        VARIATION   atmVccAalType
189            ACCESS      read-only
190            DESCRIPTION
191                "The atmVccTerminationGroup2 is not used for configuring VCCs.
192                Use the Juniper-UNI-ATM-MIB."
193        VARIATION   atmVclRowStatus
194            ACCESS      read-only
195            DESCRIPTION
196                "The atmVccTerminationGroup2 is not used for configuring VCCs.
197                Use the Juniper-UNI-ATM-MIB."
198        VARIATION   atmVclCastType
199            ACCESS      read-only
200            DESCRIPTION
201                "The atmVccTerminationGroup2 is not used for configuring VCCs.
202                Use the Juniper-UNI-ATM-MIB."
203        VARIATION   atmVclConnKind
204            ACCESS      read-only
205            DESCRIPTION
206                "The atmVccTerminationGroup2 is not used for configuring VCCs.
207                Use the Juniper-UNI-ATM-MIB."
208    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
209        INCLUDES {
210            atmfM4General,
211            atmfM4AtmLayerGroup,
212            atmfM4VpTestGroup,
213            atmfM4VcTestGroup }
214        VARIATION   atmfM4NeVersion
215            ACCESS      not-implemented
216            DESCRIPTION
217                "The atmfM4NeVersion object is not supported."
218        VARIATION   atmfM4NeStartTime
219            ACCESS      not-implemented
220            DESCRIPTION
221                "The atmfM4NeStartTime object is not supported."
222        VARIATION   atmfM4NeAlarmSeverityIndex
223            ACCESS      not-implemented
224            DESCRIPTION
225                "The atmfM4NeAlarmSeverityIndex is not supported."
226        VARIATION   atmfM4NeSuppressZeroStats
227            ACCESS      not-implemented
228            DESCRIPTION
229                "The atmfM4NeSuppressZeroStats object is not supported."
230        VARIATION   atmfM4IfType
231            ACCESS      not-implemented
232            DESCRIPTION
233                "The atmfM4IfType object is not supported."
234        VARIATION   atmfM4IfSubscriberAddress
235            ACCESS      not-implemented
236            DESCRIPTION
237                "The atmfM4IfSubscriberAddress object is not supported."
238        VARIATION   atmfM4IfPreferredCarrier
239            ACCESS      not-implemented
240            DESCRIPTION
241                "The atmfM4IfPreferredCarrier object is not supported."
242        VARIATION   atmfM4IfFarEndCarrierNetwork
243            ACCESS      not-implemented
244            DESCRIPTION
245                "The IfFarEndCarrierNetwork object is not supported."
246        VARIATION   atmfM4VclSegEndPt
247            ACCESS      read-only
248            DESCRIPTION
249                "An atmfM4VclEntry cannot be created/modified via SNMP."
250    SUPPORTS    Juniper-UNI-ATM-MIB
251        INCLUDES {
252            juniAtmGroup2,
253            juniAtmAal5Group,
254            juniAtmSubIfGroup2,
255            juniAtmVpPingControlGroup,
256            juniAtmVcPingControlGroup,
257            juniAtmPingTrapGroup }
258    ::= { juniAtmVccEndPointAgent 2 }
259
260juniAtmVccEndPointAgentV3  AGENT-CAPABILITIES
261    PRODUCT-RELEASE
262        "Version 3 of the ATM VCC end point agent subcomponent of the JUNOSe
263        SNMP agent.  This version of the ATM end point subcomponent was
264        supported in JUNOSe 3.4 and subsequent 3.x system releases."
265    STATUS      obsolete
266    DESCRIPTION
267        "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
268        These capabilities became obsolete when support was added to the
269        Juniper-UNI-ATM-MIB for switched virtual connection (SVC)."
270    SUPPORTS    ATM-MIB
271        INCLUDES {
272            atmInterfaceTCGroup,
273            aal5VccGroup,
274            atmInterfaceConfGroup2,
275            atmVccTerminationGroup2 }
276        VARIATION   atmVclAdminStatus
277            ACCESS      read-only
278            DESCRIPTION
279                "The atmVccTerminationGroup2 is not used for configuring VCCs.
280                Use the Juniper-UNI-ATM-MIB."
281        VARIATION   atmVclReceiveTrafficDescrIndex
282            ACCESS      read-only
283            DESCRIPTION
284                "The atmVccTerminationGroup2 is not used for configuring VCCs.
285                Use the Juniper-UNI-ATM-MIB."
286        VARIATION   atmVclTransmitTrafficDescrIndex
287            ACCESS      read-only
288            DESCRIPTION
289                "The atmVccTerminationGroup2 is not used for configuring VCCs.
290                Use the Juniper-UNI-ATM-MIB."
291        VARIATION   atmVccAalType
292            ACCESS      read-only
293            DESCRIPTION
294                "The atmVccTerminationGroup2 is not used for configuring VCCs.
295                Use the Juniper-UNI-ATM-MIB."
296        VARIATION   atmVclRowStatus
297            ACCESS      read-only
298            DESCRIPTION
299                "The atmVccTerminationGroup2 is not used for configuring VCCs.
300                Use the Juniper-UNI-ATM-MIB."
301        VARIATION   atmVclCastType
302            ACCESS      read-only
303            DESCRIPTION
304                "The atmVccTerminationGroup2 is not used for configuring VCCs.
305                Use the Juniper-UNI-ATM-MIB."
306        VARIATION   atmVclConnKind
307            ACCESS      read-only
308            DESCRIPTION
309                "The atmVccTerminationGroup2 is not used for configuring VCCs.
310                Use the Juniper-UNI-ATM-MIB."
311    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
312        INCLUDES {
313            atmfM4General,
314            atmfM4AtmLayerGroup,
315            atmfM4VpTestGroup,
316            atmfM4VcTestGroup }
317        VARIATION   atmfM4NeVersion
318            ACCESS      not-implemented
319            DESCRIPTION
320                "The atmfM4NeVersion object is not supported."
321        VARIATION   atmfM4NeStartTime
322            ACCESS      not-implemented
323            DESCRIPTION
324                "The atmfM4NeStartTime object is not supported."
325        VARIATION   atmfM4NeAlarmSeverityIndex
326            ACCESS      not-implemented
327            DESCRIPTION
328                "The atmfM4NeAlarmSeverityIndex is not supported."
329        VARIATION   atmfM4NeSuppressZeroStats
330            ACCESS      not-implemented
331            DESCRIPTION
332                "The atmfM4NeSuppressZeroStats object is not supported."
333        VARIATION   atmfM4IfType
334            ACCESS      not-implemented
335            DESCRIPTION
336                "The atmfM4IfType object is not supported."
337        VARIATION   atmfM4IfSubscriberAddress
338            ACCESS      not-implemented
339            DESCRIPTION
340                "The atmfM4IfSubscriberAddress object is not supported."
341        VARIATION   atmfM4IfPreferredCarrier
342            ACCESS      not-implemented
343            DESCRIPTION
344                "The atmfM4IfPreferredCarrier object is not supported."
345        VARIATION   atmfM4IfFarEndCarrierNetwork
346            ACCESS      not-implemented
347            DESCRIPTION
348                "The IfFarEndCarrierNetwork object is not supported."
349        VARIATION   atmfM4VclSegEndPt
350            ACCESS      read-only
351            DESCRIPTION
352                "An atmfM4VclEntry cannot be created/modified via SNMP."
353    SUPPORTS    Juniper-UNI-ATM-MIB
354        INCLUDES {
355            juniAtmGroup3,
356            juniAtmAal5Group,
357            juniAtmSubIfGroup2,
358            juniAtmVpPingControlGroup,
359            juniAtmVcPingControlGroup,
360            juniAtmPingTrapGroup }
361    ::= { juniAtmVccEndPointAgent 3 }
362
363juniAtmVccEndPointAgentV4  AGENT-CAPABILITIES
364    PRODUCT-RELEASE
365        "Version 4 of the ATM VCC end point agent subcomponent of the JUNOSe
366        SNMP agent.  This version of the ATM end point subcomponent was
367        supported in JUNOSe 4.0 system releases."
368    STATUS      obsolete
369    DESCRIPTION
370        "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
371        These capabilitie became obsolete when CAC recieve bandwith and E164
372        public addressing objects were added."
373    SUPPORTS    ATM-MIB
374        INCLUDES {
375            atmInterfaceTCGroup,
376            aal5VccGroup,
377            atmInterfaceConfGroup2,
378            atmVccTerminationGroup2 }
379        VARIATION   atmVclAdminStatus
380            ACCESS      read-only
381            DESCRIPTION
382                "The atmVccTerminationGroup2 is not used for configuring VCCs.
383                Use the Juniper-UNI-ATM-MIB."
384        VARIATION   atmVclReceiveTrafficDescrIndex
385            ACCESS      read-only
386            DESCRIPTION
387                "The atmVccTerminationGroup2 is not used for configuring VCCs.
388                Use the Juniper-UNI-ATM-MIB."
389        VARIATION   atmVclTransmitTrafficDescrIndex
390            ACCESS      read-only
391            DESCRIPTION
392                "The atmVccTerminationGroup2 is not used for configuring VCCs.
393                Use the Juniper-UNI-ATM-MIB."
394        VARIATION   atmVccAalType
395            ACCESS      read-only
396            DESCRIPTION
397                "The atmVccTerminationGroup2 is not used for configuring VCCs.
398                Use the Juniper-UNI-ATM-MIB."
399        VARIATION   atmVclRowStatus
400            ACCESS      read-only
401            DESCRIPTION
402                "The atmVccTerminationGroup2 is not used for configuring VCCs.
403                Use the Juniper-UNI-ATM-MIB."
404        VARIATION   atmVclCastType
405            ACCESS      read-only
406            DESCRIPTION
407                "The atmVccTerminationGroup2 is not used for configuring VCCs.
408                Use the Juniper-UNI-ATM-MIB."
409        VARIATION   atmVclConnKind
410            ACCESS      read-only
411            DESCRIPTION
412                "The atmVccTerminationGroup2 is not used for configuring VCCs.
413                Use the Juniper-UNI-ATM-MIB."
414    SUPPORTS    ATM2-MIB
415        INCLUDES {
416            atmCommonGroup,
417            atmHostGroup }
418        VARIATION   atmVplLogicalPortDef
419            ACCESS      not-implemented
420            DESCRIPTION
421                "The atmVplLogicalPortTable is not supported."
422        VARIATION   atmVplLogicalPortIndex
423            ACCESS      not-implemented
424            DESCRIPTION
425                "The atmVplLogicalPortTable is not supported."
426        VARIATION   atmCurrentlyFailingPVplTimeStamp
427            ACCESS      not-implemented
428            DESCRIPTION
429                "The atmCurrentlyFailingPVplTable is not supported."
430        VARIATION   atmCurrentlyFailingPVclTimeStamp
431            ACCESS      not-implemented
432            DESCRIPTION
433                "The atmCurrentlyFailingPVclTable is not supported."
434        VARIATION   atmVclAddrType
435            ACCESS      not-implemented
436            DESCRIPTION
437                "The atmVclAddrTable is not supported."
438        VARIATION   atmVclAddrRowStatus
439            ACCESS      not-implemented
440            DESCRIPTION
441                "The atmVclAddrTable is not supported."
442        VARIATION   atmAddrVclAddrType
443            ACCESS      not-implemented
444            DESCRIPTION
445                "The atmAddrVclTable is not supported."
446        VARIATION   atmVclGenSigDescrIndex
447            ACCESS      not-implemented
448            DESCRIPTION
449                "The atmVclGenTable is not supported."
450    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
451        INCLUDES {
452            atmfM4General,
453            atmfM4AtmLayerGroup,
454            atmfM4VpTestGroup,
455            atmfM4VcTestGroup }
456        VARIATION   atmfM4NeVersion
457            ACCESS      not-implemented
458            DESCRIPTION
459                "The atmfM4NeVersion object is not supported."
460        VARIATION   atmfM4NeStartTime
461            ACCESS      not-implemented
462            DESCRIPTION
463                "The atmfM4NeStartTime object is not supported."
464        VARIATION   atmfM4NeAlarmSeverityIndex
465            ACCESS      not-implemented
466            DESCRIPTION
467                "The atmfM4NeAlarmSeverityIndex is not supported."
468        VARIATION   atmfM4NeSuppressZeroStats
469            ACCESS      not-implemented
470            DESCRIPTION
471                "The atmfM4NeSuppressZeroStats object is not supported."
472        VARIATION   atmfM4IfType
473            ACCESS      not-implemented
474            DESCRIPTION
475                "The atmfM4IfType object is not supported."
476        VARIATION   atmfM4IfSubscriberAddress
477            ACCESS      not-implemented
478            DESCRIPTION
479                "The atmfM4IfSubscriberAddress object is not supported."
480        VARIATION   atmfM4IfPreferredCarrier
481            ACCESS      not-implemented
482            DESCRIPTION
483                "The atmfM4IfPreferredCarrier object is not supported."
484        VARIATION   atmfM4IfFarEndCarrierNetwork
485            ACCESS      not-implemented
486            DESCRIPTION
487                "The IfFarEndCarrierNetwork object is not supported."
488        VARIATION   atmfM4VclSegEndPt
489            ACCESS      read-only
490            DESCRIPTION
491                "An atmfM4VclEntry cannot be created/modified via SNMP."
492    SUPPORTS    Juniper-UNI-ATM-MIB
493        INCLUDES {
494            juniAtmGroup4,
495            juniAtmAal5Group,
496            juniAtmSubIfGroup3,
497            juniAtmVpPingControlGroup,
498            juniAtmVcPingControlGroup,
499            juniAtmPingTrapGroup,
500            juniAtmSvcGroup }
501    ::= { juniAtmVccEndPointAgent 4 }
502
503juniAtmVccEndPointAgentV5  AGENT-CAPABILITIES
504    PRODUCT-RELEASE
505        "Version 5 of the ATM VCC end point agent subcomponent of the JUNOSe
506        SNMP agent.  This version of the ATM end point subcomponent was
507        supported in JUNOSe 4.1 thru 5.0 system releases."
508    STATUS      obsolete
509    DESCRIPTION
510        "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
511        These capabilitie became obsolete when F4 flow OAM circuits and ATM VP
512        description objects were added to the Juniper-UNI-ATM-MIB."
513    SUPPORTS    ATM-MIB
514        INCLUDES {
515            atmInterfaceTCGroup,
516            aal5VccGroup,
517            atmInterfaceConfGroup2,
518            atmVccTerminationGroup2 }
519        VARIATION   atmVclAdminStatus
520            ACCESS      read-only
521            DESCRIPTION
522                "The atmVccTerminationGroup2 is not used for configuring VCCs.
523                Use the Juniper-UNI-ATM-MIB."
524        VARIATION   atmVclReceiveTrafficDescrIndex
525            ACCESS      read-only
526            DESCRIPTION
527                "The atmVccTerminationGroup2 is not used for configuring VCCs.
528                Use the Juniper-UNI-ATM-MIB."
529        VARIATION   atmVclTransmitTrafficDescrIndex
530            ACCESS      read-only
531            DESCRIPTION
532                "The atmVccTerminationGroup2 is not used for configuring VCCs.
533                Use the Juniper-UNI-ATM-MIB."
534        VARIATION   atmVccAalType
535            ACCESS      read-only
536            DESCRIPTION
537                "The atmVccTerminationGroup2 is not used for configuring VCCs.
538                Use the Juniper-UNI-ATM-MIB."
539        VARIATION   atmVclRowStatus
540            ACCESS      read-only
541            DESCRIPTION
542                "The atmVccTerminationGroup2 is not used for configuring VCCs.
543                Use the Juniper-UNI-ATM-MIB."
544        VARIATION   atmVclCastType
545            ACCESS      read-only
546            DESCRIPTION
547                "The atmVccTerminationGroup2 is not used for configuring VCCs.
548                Use the Juniper-UNI-ATM-MIB."
549        VARIATION   atmVclConnKind
550            ACCESS      read-only
551            DESCRIPTION
552                "The atmVccTerminationGroup2 is not used for configuring VCCs.
553                Use the Juniper-UNI-ATM-MIB."
554    SUPPORTS    ATM2-MIB
555        INCLUDES {
556            atmCommonGroup,
557            atmHostGroup }
558        VARIATION   atmVplLogicalPortDef
559            ACCESS      not-implemented
560            DESCRIPTION
561                "The atmVplLogicalPortTable is not supported."
562        VARIATION   atmVplLogicalPortIndex
563            ACCESS      not-implemented
564            DESCRIPTION
565                "The atmVplLogicalPortTable is not supported."
566        VARIATION   atmCurrentlyFailingPVplTimeStamp
567            ACCESS      not-implemented
568            DESCRIPTION
569                "The atmCurrentlyFailingPVplTable is not supported."
570        VARIATION   atmCurrentlyFailingPVclTimeStamp
571            ACCESS      not-implemented
572            DESCRIPTION
573                "The atmCurrentlyFailingPVclTable is not supported."
574        VARIATION   atmVclAddrType
575            ACCESS      not-implemented
576            DESCRIPTION
577                "The atmVclAddrTable is not supported."
578        VARIATION   atmVclAddrRowStatus
579            ACCESS      not-implemented
580            DESCRIPTION
581                "The atmVclAddrTable is not supported."
582        VARIATION   atmAddrVclAddrType
583            ACCESS      not-implemented
584            DESCRIPTION
585                "The atmAddrVclTable is not supported."
586        VARIATION   atmVclGenSigDescrIndex
587            ACCESS      not-implemented
588            DESCRIPTION
589                "The atmVclGenTable is not supported."
590    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
591        INCLUDES {
592            atmfM4General,
593            atmfM4AtmLayerGroup,
594            atmfM4VpTestGroup,
595            atmfM4VcTestGroup }
596        VARIATION   atmfM4NeVersion
597            ACCESS      not-implemented
598            DESCRIPTION
599                "The atmfM4NeVersion object is not supported."
600        VARIATION   atmfM4NeStartTime
601            ACCESS      not-implemented
602            DESCRIPTION
603                "The atmfM4NeStartTime object is not supported."
604        VARIATION   atmfM4NeAlarmSeverityIndex
605            ACCESS      not-implemented
606            DESCRIPTION
607                "The atmfM4NeAlarmSeverityIndex is not supported."
608        VARIATION   atmfM4NeSuppressZeroStats
609            ACCESS      not-implemented
610            DESCRIPTION
611                "The atmfM4NeSuppressZeroStats object is not supported."
612        VARIATION   atmfM4IfType
613            ACCESS      not-implemented
614            DESCRIPTION
615                "The atmfM4IfType object is not supported."
616        VARIATION   atmfM4IfSubscriberAddress
617            ACCESS      not-implemented
618            DESCRIPTION
619                "The atmfM4IfSubscriberAddress object is not supported."
620        VARIATION   atmfM4IfPreferredCarrier
621            ACCESS      not-implemented
622            DESCRIPTION
623                "The atmfM4IfPreferredCarrier object is not supported."
624        VARIATION   atmfM4IfFarEndCarrierNetwork
625            ACCESS      not-implemented
626            DESCRIPTION
627                "The IfFarEndCarrierNetwork object is not supported."
628        VARIATION   atmfM4VclSegEndPt
629            ACCESS      read-only
630            DESCRIPTION
631                "An atmfM4VclEntry cannot be created/modified via SNMP."
632    SUPPORTS    Juniper-UNI-ATM-MIB
633        INCLUDES {
634            juniAtmGroup5,
635            juniAtmAal5Group,
636            juniAtmSubIfGroup4,
637            juniAtmVpPingControlGroup,
638            juniAtmVcPingControlGroup,
639            juniAtmPingTrapGroup,
640            juniAtmSvcGroup2 }
641    ::= { juniAtmVccEndPointAgent 5 }
642
643juniAtmVccEndPointAgentV6  AGENT-CAPABILITIES
644    PRODUCT-RELEASE
645        "Version 6 of the ATM VCC end point agent subcomponent of the JUNOSe
646        SNMP agent.  This version of the ATM end point subcomponent was
647        supported in JUNOSe 5.1 system releases."
648    STATUS      obsolete
649    DESCRIPTION
650        "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
651        These capabilitie became obsolete when ATM sub-interface location
652        support was added to the Juniper-UNI-ATM-MIB."
653    SUPPORTS    ATM-MIB
654        INCLUDES {
655            atmInterfaceTCGroup,
656            aal5VccGroup,
657            atmInterfaceConfGroup2,
658            atmVccTerminationGroup2 }
659        VARIATION   atmVclAdminStatus
660            ACCESS      read-only
661            DESCRIPTION
662                "The atmVccTerminationGroup2 is not used for configuring VCCs.
663                Use the Juniper-UNI-ATM-MIB."
664        VARIATION   atmVclReceiveTrafficDescrIndex
665            ACCESS      read-only
666            DESCRIPTION
667                "The atmVccTerminationGroup2 is not used for configuring VCCs.
668                Use the Juniper-UNI-ATM-MIB."
669        VARIATION   atmVclTransmitTrafficDescrIndex
670            ACCESS      read-only
671            DESCRIPTION
672                "The atmVccTerminationGroup2 is not used for configuring VCCs.
673                Use the Juniper-UNI-ATM-MIB."
674        VARIATION   atmVccAalType
675            ACCESS      read-only
676            DESCRIPTION
677                "The atmVccTerminationGroup2 is not used for configuring VCCs.
678                Use the Juniper-UNI-ATM-MIB."
679        VARIATION   atmVclRowStatus
680            ACCESS      read-only
681            DESCRIPTION
682                "The atmVccTerminationGroup2 is not used for configuring VCCs.
683                Use the Juniper-UNI-ATM-MIB."
684        VARIATION   atmVclCastType
685            ACCESS      read-only
686            DESCRIPTION
687                "The atmVccTerminationGroup2 is not used for configuring VCCs.
688                Use the Juniper-UNI-ATM-MIB."
689        VARIATION   atmVclConnKind
690            ACCESS      read-only
691            DESCRIPTION
692                "The atmVccTerminationGroup2 is not used for configuring VCCs.
693                Use the Juniper-UNI-ATM-MIB."
694    SUPPORTS    ATM2-MIB
695        INCLUDES {
696            atmCommonGroup,
697            atmHostGroup }
698        VARIATION   atmVplLogicalPortDef
699            ACCESS      not-implemented
700            DESCRIPTION
701                "The atmVplLogicalPortTable is not supported."
702        VARIATION   atmVplLogicalPortIndex
703            ACCESS      not-implemented
704            DESCRIPTION
705                "The atmVplLogicalPortTable is not supported."
706        VARIATION   atmCurrentlyFailingPVplTimeStamp
707            ACCESS      not-implemented
708            DESCRIPTION
709                "The atmCurrentlyFailingPVplTable is not supported."
710        VARIATION   atmCurrentlyFailingPVclTimeStamp
711            ACCESS      not-implemented
712            DESCRIPTION
713                "The atmCurrentlyFailingPVclTable is not supported."
714        VARIATION   atmVclAddrType
715            ACCESS      not-implemented
716            DESCRIPTION
717                "The atmVclAddrTable is not supported."
718        VARIATION   atmVclAddrRowStatus
719            ACCESS      not-implemented
720            DESCRIPTION
721                "The atmVclAddrTable is not supported."
722        VARIATION   atmAddrVclAddrType
723            ACCESS      not-implemented
724            DESCRIPTION
725                "The atmAddrVclTable is not supported."
726        VARIATION   atmVclGenSigDescrIndex
727            ACCESS      not-implemented
728            DESCRIPTION
729                "The atmVclGenTable is not supported."
730    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
731        INCLUDES {
732            atmfM4General,
733            atmfM4AtmLayerGroup,
734            atmfM4VpTestGroup,
735            atmfM4VcTestGroup }
736        VARIATION   atmfM4NeVersion
737            ACCESS      not-implemented
738            DESCRIPTION
739                "The atmfM4NeVersion object is not supported."
740        VARIATION   atmfM4NeStartTime
741            ACCESS      not-implemented
742            DESCRIPTION
743                "The atmfM4NeStartTime object is not supported."
744        VARIATION   atmfM4NeAlarmSeverityIndex
745            ACCESS      not-implemented
746            DESCRIPTION
747                "The atmfM4NeAlarmSeverityIndex is not supported."
748        VARIATION   atmfM4NeSuppressZeroStats
749            ACCESS      not-implemented
750            DESCRIPTION
751                "The atmfM4NeSuppressZeroStats object is not supported."
752        VARIATION   atmfM4IfType
753            ACCESS      not-implemented
754            DESCRIPTION
755                "The atmfM4IfType object is not supported."
756        VARIATION   atmfM4IfSubscriberAddress
757            ACCESS      not-implemented
758            DESCRIPTION
759                "The atmfM4IfSubscriberAddress object is not supported."
760        VARIATION   atmfM4IfPreferredCarrier
761            ACCESS      not-implemented
762            DESCRIPTION
763                "The atmfM4IfPreferredCarrier object is not supported."
764        VARIATION   atmfM4IfFarEndCarrierNetwork
765            ACCESS      not-implemented
766            DESCRIPTION
767                "The IfFarEndCarrierNetwork object is not supported."
768        VARIATION   atmfM4VclSegEndPt
769            ACCESS      read-only
770            DESCRIPTION
771                "An atmfM4VclEntry cannot be created/modified via SNMP."
772    SUPPORTS    Juniper-UNI-ATM-MIB
773        INCLUDES {
774            juniAtmGroup6,
775            juniAtmAal5Group,
776            juniAtmSubIfGroup4,
777            juniAtmVpPingControlGroup,
778            juniAtmVcPingControlGroup,
779            juniAtmPingTrapGroup,
780            juniAtmSvcGroup2,
781            juniAtmF4OamCircuitGroup }
782    ::= { juniAtmVccEndPointAgent 6 }
783
784juniAtmVccEndPointAgentV7  AGENT-CAPABILITIES
785    PRODUCT-RELEASE
786        "Version 7 of the ATM VCC end point agent subcomponent of the JUNOSe
787        SNMP agent.  This version of the ATM end point subcomponent was supported
788        in JUNOSe 5.2 system release."
789    STATUS      obsolete
790    DESCRIPTION
791        "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
792        These capabilitie became obsolete when support was added to export
793        ATM sub-interface descriptions to the line cards."
794    SUPPORTS    ATM-MIB
795        INCLUDES {
796            atmInterfaceTCGroup,
797            aal5VccGroup,
798            atmInterfaceConfGroup2,
799            atmVccTerminationGroup2 }
800        VARIATION   atmVclAdminStatus
801            ACCESS      read-only
802            DESCRIPTION
803                "The atmVccTerminationGroup2 is not used for configuring VCCs.
804                Use the Juniper-UNI-ATM-MIB."
805        VARIATION   atmVclReceiveTrafficDescrIndex
806            ACCESS      read-only
807            DESCRIPTION
808                "The atmVccTerminationGroup2 is not used for configuring VCCs.
809                Use the Juniper-UNI-ATM-MIB."
810        VARIATION   atmVclTransmitTrafficDescrIndex
811            ACCESS      read-only
812            DESCRIPTION
813                "The atmVccTerminationGroup2 is not used for configuring VCCs.
814                Use the Juniper-UNI-ATM-MIB."
815        VARIATION   atmVccAalType
816            ACCESS      read-only
817            DESCRIPTION
818                "The atmVccTerminationGroup2 is not used for configuring VCCs.
819                Use the Juniper-UNI-ATM-MIB."
820        VARIATION   atmVclRowStatus
821            ACCESS      read-only
822            DESCRIPTION
823                "The atmVccTerminationGroup2 is not used for configuring VCCs.
824                Use the Juniper-UNI-ATM-MIB."
825        VARIATION   atmVclCastType
826            ACCESS      read-only
827            DESCRIPTION
828                "The atmVccTerminationGroup2 is not used for configuring VCCs.
829                Use the Juniper-UNI-ATM-MIB."
830        VARIATION   atmVclConnKind
831            ACCESS      read-only
832            DESCRIPTION
833                "The atmVccTerminationGroup2 is not used for configuring VCCs.
834                Use the Juniper-UNI-ATM-MIB."
835    SUPPORTS    ATM2-MIB
836        INCLUDES {
837            atmCommonGroup,
838            atmHostGroup }
839        VARIATION   atmVplLogicalPortDef
840            ACCESS      not-implemented
841            DESCRIPTION
842                "The atmVplLogicalPortTable is not supported."
843        VARIATION   atmVplLogicalPortIndex
844            ACCESS      not-implemented
845            DESCRIPTION
846                "The atmVplLogicalPortTable is not supported."
847        VARIATION   atmCurrentlyFailingPVplTimeStamp
848            ACCESS      not-implemented
849            DESCRIPTION
850                "The atmCurrentlyFailingPVplTable is not supported."
851        VARIATION   atmCurrentlyFailingPVclTimeStamp
852            ACCESS      not-implemented
853            DESCRIPTION
854                "The atmCurrentlyFailingPVclTable is not supported."
855        VARIATION   atmVclAddrType
856            ACCESS      not-implemented
857            DESCRIPTION
858                "The atmVclAddrTable is not supported."
859        VARIATION   atmVclAddrRowStatus
860            ACCESS      not-implemented
861            DESCRIPTION
862                "The atmVclAddrTable is not supported."
863        VARIATION   atmAddrVclAddrType
864            ACCESS      not-implemented
865            DESCRIPTION
866                "The atmAddrVclTable is not supported."
867        VARIATION   atmVclGenSigDescrIndex
868            ACCESS      not-implemented
869            DESCRIPTION
870                "The atmVclGenTable is not supported."
871    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
872        INCLUDES {
873            atmfM4General,
874            atmfM4AtmLayerGroup,
875            atmfM4VpTestGroup,
876            atmfM4VcTestGroup }
877        VARIATION   atmfM4NeVersion
878            ACCESS      not-implemented
879            DESCRIPTION
880                "The atmfM4NeVersion object is not supported."
881        VARIATION   atmfM4NeStartTime
882            ACCESS      not-implemented
883            DESCRIPTION
884                "The atmfM4NeStartTime object is not supported."
885        VARIATION   atmfM4NeAlarmSeverityIndex
886            ACCESS      not-implemented
887            DESCRIPTION
888                "The atmfM4NeAlarmSeverityIndex is not supported."
889        VARIATION   atmfM4NeSuppressZeroStats
890            ACCESS      not-implemented
891            DESCRIPTION
892                "The atmfM4NeSuppressZeroStats object is not supported."
893        VARIATION   atmfM4IfType
894            ACCESS      not-implemented
895            DESCRIPTION
896                "The atmfM4IfType object is not supported."
897        VARIATION   atmfM4IfSubscriberAddress
898            ACCESS      not-implemented
899            DESCRIPTION
900                "The atmfM4IfSubscriberAddress object is not supported."
901        VARIATION   atmfM4IfPreferredCarrier
902            ACCESS      not-implemented
903            DESCRIPTION
904                "The atmfM4IfPreferredCarrier object is not supported."
905        VARIATION   atmfM4IfFarEndCarrierNetwork
906            ACCESS      not-implemented
907            DESCRIPTION
908                "The IfFarEndCarrierNetwork object is not supported."
909        VARIATION   atmfM4VclSegEndPt
910            ACCESS      read-only
911            DESCRIPTION
912                "An atmfM4VclEntry cannot be created/modified via SNMP."
913    SUPPORTS    Juniper-UNI-ATM-MIB
914        INCLUDES {
915            juniAtmGroup6,
916            juniAtmAal5Group,
917            juniAtmSubIfGroup4,
918            juniAtmVpPingControlGroup,
919            juniAtmVcPingControlGroup,
920            juniAtmPingTrapGroup,
921            juniAtmSvcGroup2,
922            juniAtmF4OamCircuitGroup,
923            juniAtmLocationGroup }
924    ::= { juniAtmVccEndPointAgent 7 }
925
926juniAtmVccEndPointAgentV8  AGENT-CAPABILITIES
927    PRODUCT-RELEASE
928        "Version 8 of the ATM VCC end point agent subcomponent of the JUNOSe
929        SNMP agent.  This version of the ATM end point subcomponent was supported
930        in JUNOSe 5.3 and 6.0 system releases."
931    STATUS      obsolete
932    DESCRIPTION
933        "The MIBs supported by the SNMP agent for the ATM application in
934        JUNOSe.  These capabilities became obsolete when ATM bulk configuration
935        profile override was introduced."
936    SUPPORTS    ATM-MIB
937        INCLUDES {
938            atmInterfaceTCGroup,
939            aal5VccGroup,
940            atmInterfaceConfGroup2,
941            atmVccTerminationGroup2 }
942        VARIATION   atmVclAdminStatus
943            ACCESS      read-only
944            DESCRIPTION
945                "The atmVccTerminationGroup2 is not used for configuring VCCs.
946                Use the Juniper-UNI-ATM-MIB."
947        VARIATION   atmVclReceiveTrafficDescrIndex
948            ACCESS      read-only
949            DESCRIPTION
950                "The atmVccTerminationGroup2 is not used for configuring VCCs.
951                Use the Juniper-UNI-ATM-MIB."
952        VARIATION   atmVclTransmitTrafficDescrIndex
953            ACCESS      read-only
954            DESCRIPTION
955                "The atmVccTerminationGroup2 is not used for configuring VCCs.
956                Use the Juniper-UNI-ATM-MIB."
957        VARIATION   atmVccAalType
958            ACCESS      read-only
959            DESCRIPTION
960                "The atmVccTerminationGroup2 is not used for configuring VCCs.
961                Use the Juniper-UNI-ATM-MIB."
962        VARIATION   atmVclRowStatus
963            ACCESS      read-only
964            DESCRIPTION
965                "The atmVccTerminationGroup2 is not used for configuring VCCs.
966                Use the Juniper-UNI-ATM-MIB."
967        VARIATION   atmVclCastType
968            ACCESS      read-only
969            DESCRIPTION
970                "The atmVccTerminationGroup2 is not used for configuring VCCs.
971                Use the Juniper-UNI-ATM-MIB."
972        VARIATION   atmVclConnKind
973            ACCESS      read-only
974            DESCRIPTION
975                "The atmVccTerminationGroup2 is not used for configuring VCCs.
976                Use the Juniper-UNI-ATM-MIB."
977    SUPPORTS    ATM2-MIB
978        INCLUDES {
979            atmCommonGroup,
980            atmHostGroup }
981        VARIATION   atmVplLogicalPortDef
982            ACCESS      not-implemented
983            DESCRIPTION
984                "The atmVplLogicalPortTable is not supported."
985        VARIATION   atmVplLogicalPortIndex
986            ACCESS      not-implemented
987            DESCRIPTION
988                "The atmVplLogicalPortTable is not supported."
989        VARIATION   atmCurrentlyFailingPVplTimeStamp
990            ACCESS      not-implemented
991            DESCRIPTION
992                "The atmCurrentlyFailingPVplTable is not supported."
993        VARIATION   atmCurrentlyFailingPVclTimeStamp
994            ACCESS      not-implemented
995            DESCRIPTION
996                "The atmCurrentlyFailingPVclTable is not supported."
997        VARIATION   atmVclAddrType
998            ACCESS      not-implemented
999            DESCRIPTION
1000                "The atmVclAddrTable is not supported."
1001        VARIATION   atmVclAddrRowStatus
1002            ACCESS      not-implemented
1003            DESCRIPTION
1004                "The atmVclAddrTable is not supported."
1005        VARIATION   atmAddrVclAddrType
1006            ACCESS      not-implemented
1007            DESCRIPTION
1008                "The atmAddrVclTable is not supported."
1009        VARIATION   atmVclGenSigDescrIndex
1010            ACCESS      not-implemented
1011            DESCRIPTION
1012                "The atmVclGenTable is not supported."
1013    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
1014        INCLUDES {
1015            atmfM4General,
1016            atmfM4AtmLayerGroup,
1017            atmfM4VpTestGroup,
1018            atmfM4VcTestGroup }
1019        VARIATION   atmfM4NeVersion
1020            ACCESS      not-implemented
1021            DESCRIPTION
1022                "The atmfM4NeVersion object is not supported."
1023        VARIATION   atmfM4NeStartTime
1024            ACCESS      not-implemented
1025            DESCRIPTION
1026                "The atmfM4NeStartTime object is not supported."
1027        VARIATION   atmfM4NeAlarmSeverityIndex
1028            ACCESS      not-implemented
1029            DESCRIPTION
1030                "The atmfM4NeAlarmSeverityIndex is not supported."
1031        VARIATION   atmfM4NeSuppressZeroStats
1032            ACCESS      not-implemented
1033            DESCRIPTION
1034                "The atmfM4NeSuppressZeroStats object is not supported."
1035        VARIATION   atmfM4IfType
1036            ACCESS      not-implemented
1037            DESCRIPTION
1038                "The atmfM4IfType object is not supported."
1039        VARIATION   atmfM4IfSubscriberAddress
1040            ACCESS      not-implemented
1041            DESCRIPTION
1042                "The atmfM4IfSubscriberAddress object is not supported."
1043        VARIATION   atmfM4IfPreferredCarrier
1044            ACCESS      not-implemented
1045            DESCRIPTION
1046                "The atmfM4IfPreferredCarrier object is not supported."
1047        VARIATION   atmfM4IfFarEndCarrierNetwork
1048            ACCESS      not-implemented
1049            DESCRIPTION
1050                "The IfFarEndCarrierNetwork object is not supported."
1051        VARIATION   atmfM4VclSegEndPt
1052            ACCESS      read-only
1053            DESCRIPTION
1054                "An atmfM4VclEntry cannot be created/modified via SNMP."
1055    SUPPORTS    Juniper-UNI-ATM-MIB
1056        INCLUDES {
1057            juniAtmGroup6,
1058            juniAtmAal5Group,
1059            juniAtmSubIfGroup5,
1060            juniAtmVpPingControlGroup,
1061            juniAtmVcPingControlGroup,
1062            juniAtmPingTrapGroup,
1063            juniAtmSvcGroup2,
1064            juniAtmF4OamCircuitGroup,
1065            juniAtmLocationGroup }
1066    ::= { juniAtmVccEndPointAgent 8 }
1067
1068juniAtmVccEndPointAgentV9  AGENT-CAPABILITIES
1069    PRODUCT-RELEASE
1070        "Version 9 of the ATM VCC end point agent subcomponent of the JUNOSe
1071        SNMP agent.  This version of the ATM end point subcomponent was supported
1072        in JUNOSe 6.1 system release."
1073    STATUS      obsolete
1074    DESCRIPTION
1075        "The MIBs supported by the SNMP agent for the ATM application in
1076        JUNOSe.  These capabilities became obsolete when ATM bulk configuration
1077        profile override was introduced."
1078    SUPPORTS    ATM-MIB
1079        INCLUDES {
1080            atmInterfaceTCGroup,
1081            aal5VccGroup,
1082            atmInterfaceConfGroup2,
1083            atmVccTerminationGroup2 }
1084        VARIATION   atmVclAdminStatus
1085            ACCESS      read-only
1086            DESCRIPTION
1087                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1088                Use the Juniper-UNI-ATM-MIB."
1089        VARIATION   atmVclReceiveTrafficDescrIndex
1090            ACCESS      read-only
1091            DESCRIPTION
1092                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1093                Use the Juniper-UNI-ATM-MIB."
1094        VARIATION   atmVclTransmitTrafficDescrIndex
1095            ACCESS      read-only
1096            DESCRIPTION
1097                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1098                Use the Juniper-UNI-ATM-MIB."
1099        VARIATION   atmVccAalType
1100            ACCESS      read-only
1101            DESCRIPTION
1102                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1103                Use the Juniper-UNI-ATM-MIB."
1104        VARIATION   atmVclRowStatus
1105            ACCESS      read-only
1106            DESCRIPTION
1107                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1108                Use the Juniper-UNI-ATM-MIB."
1109        VARIATION   atmVclCastType
1110            ACCESS      read-only
1111            DESCRIPTION
1112                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1113                Use the Juniper-UNI-ATM-MIB."
1114        VARIATION   atmVclConnKind
1115            ACCESS      read-only
1116            DESCRIPTION
1117                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1118                Use the Juniper-UNI-ATM-MIB."
1119    SUPPORTS    ATM2-MIB
1120        INCLUDES {
1121            atmCommonGroup,
1122            atmHostGroup }
1123        VARIATION   atmVplLogicalPortDef
1124            ACCESS      not-implemented
1125            DESCRIPTION
1126                "The atmVplLogicalPortTable is not supported."
1127        VARIATION   atmVplLogicalPortIndex
1128            ACCESS      not-implemented
1129            DESCRIPTION
1130                "The atmVplLogicalPortTable is not supported."
1131        VARIATION   atmCurrentlyFailingPVplTimeStamp
1132            ACCESS      not-implemented
1133            DESCRIPTION
1134                "The atmCurrentlyFailingPVplTable is not supported."
1135        VARIATION   atmCurrentlyFailingPVclTimeStamp
1136            ACCESS      not-implemented
1137            DESCRIPTION
1138                "The atmCurrentlyFailingPVclTable is not supported."
1139        VARIATION   atmVclAddrType
1140            ACCESS      not-implemented
1141            DESCRIPTION
1142                "The atmVclAddrTable is not supported."
1143        VARIATION   atmVclAddrRowStatus
1144            ACCESS      not-implemented
1145            DESCRIPTION
1146                "The atmVclAddrTable is not supported."
1147        VARIATION   atmAddrVclAddrType
1148            ACCESS      not-implemented
1149            DESCRIPTION
1150                "The atmAddrVclTable is not supported."
1151        VARIATION   atmVclGenSigDescrIndex
1152            ACCESS      not-implemented
1153            DESCRIPTION
1154                "The atmVclGenTable is not supported."
1155    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
1156        INCLUDES {
1157            atmfM4General,
1158            atmfM4AtmLayerGroup,
1159            atmfM4VpTestGroup,
1160            atmfM4VcTestGroup }
1161        VARIATION   atmfM4NeVersion
1162            ACCESS      not-implemented
1163            DESCRIPTION
1164                "The atmfM4NeVersion object is not supported."
1165        VARIATION   atmfM4NeStartTime
1166            ACCESS      not-implemented
1167            DESCRIPTION
1168                "The atmfM4NeStartTime object is not supported."
1169        VARIATION   atmfM4NeAlarmSeverityIndex
1170            ACCESS      not-implemented
1171            DESCRIPTION
1172                "The atmfM4NeAlarmSeverityIndex is not supported."
1173        VARIATION   atmfM4NeSuppressZeroStats
1174            ACCESS      not-implemented
1175            DESCRIPTION
1176                "The atmfM4NeSuppressZeroStats object is not supported."
1177        VARIATION   atmfM4IfType
1178            ACCESS      not-implemented
1179            DESCRIPTION
1180                "The atmfM4IfType object is not supported."
1181        VARIATION   atmfM4IfSubscriberAddress
1182            ACCESS      not-implemented
1183            DESCRIPTION
1184                "The atmfM4IfSubscriberAddress object is not supported."
1185        VARIATION   atmfM4IfPreferredCarrier
1186            ACCESS      not-implemented
1187            DESCRIPTION
1188                "The atmfM4IfPreferredCarrier object is not supported."
1189        VARIATION   atmfM4IfFarEndCarrierNetwork
1190            ACCESS      not-implemented
1191            DESCRIPTION
1192                "The IfFarEndCarrierNetwork object is not supported."
1193        VARIATION   atmfM4VclSegEndPt
1194            ACCESS      read-only
1195            DESCRIPTION
1196                "An atmfM4VclEntry cannot be created/modified via SNMP."
1197    SUPPORTS    Juniper-UNI-ATM-MIB
1198        INCLUDES {
1199            juniAtmGroup7,
1200            juniAtmAal5Group,
1201            juniAtmSubIfGroup5,
1202            juniAtmVpPingControlGroup,
1203            juniAtmVcPingControlGroup,
1204            juniAtmPingTrapGroup,
1205            juniAtmSvcGroup2,
1206            juniAtmF4OamCircuitGroup,
1207            juniAtmLocationGroup }
1208    ::= { juniAtmVccEndPointAgent 9 }
1209
1210juniAtmVccEndPointAgentV10  AGENT-CAPABILITIES
1211    PRODUCT-RELEASE
1212        "Version 10 of the ATM VCC end point agent subcomponent of the JUNOSe
1213        SNMP agent.  This version of the ATM end point subcomponent is supported
1214        in JUNOSe 7.0 and subsequent system releases."
1215    STATUS      obsolete
1216    DESCRIPTION
1217        "The MIBs supported by the SNMP agent for the ATM application in
1218        JUNOSe.These capabilities became obsolete when ATM VP Statistics
1219        was introduced."
1220    SUPPORTS    ATM-MIB
1221        INCLUDES {
1222            atmInterfaceTCGroup,
1223            aal5VccGroup,
1224            atmInterfaceConfGroup2,
1225            atmVccTerminationGroup2 }
1226        VARIATION   atmVclAdminStatus
1227            ACCESS      read-only
1228            DESCRIPTION
1229                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1230                Use the Juniper-UNI-ATM-MIB."
1231        VARIATION   atmVclReceiveTrafficDescrIndex
1232            ACCESS      read-only
1233            DESCRIPTION
1234                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1235                Use the Juniper-UNI-ATM-MIB."
1236        VARIATION   atmVclTransmitTrafficDescrIndex
1237            ACCESS      read-only
1238            DESCRIPTION
1239                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1240                Use the Juniper-UNI-ATM-MIB."
1241        VARIATION   atmVccAalType
1242            ACCESS      read-only
1243            DESCRIPTION
1244                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1245                Use the Juniper-UNI-ATM-MIB."
1246        VARIATION   atmVclRowStatus
1247            ACCESS      read-only
1248            DESCRIPTION
1249                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1250                Use the Juniper-UNI-ATM-MIB."
1251        VARIATION   atmVclCastType
1252            ACCESS      read-only
1253            DESCRIPTION
1254                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1255                Use the Juniper-UNI-ATM-MIB."
1256        VARIATION   atmVclConnKind
1257            ACCESS      read-only
1258            DESCRIPTION
1259                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1260                Use the Juniper-UNI-ATM-MIB."
1261    SUPPORTS    ATM2-MIB
1262        INCLUDES {
1263            atmCommonGroup,
1264            atmHostGroup }
1265        VARIATION   atmVplLogicalPortDef
1266            ACCESS      not-implemented
1267            DESCRIPTION
1268                "The atmVplLogicalPortTable is not supported."
1269        VARIATION   atmVplLogicalPortIndex
1270            ACCESS      not-implemented
1271            DESCRIPTION
1272                "The atmVplLogicalPortTable is not supported."
1273        VARIATION   atmCurrentlyFailingPVplTimeStamp
1274            ACCESS      not-implemented
1275            DESCRIPTION
1276                "The atmCurrentlyFailingPVplTable is not supported."
1277        VARIATION   atmCurrentlyFailingPVclTimeStamp
1278            ACCESS      not-implemented
1279            DESCRIPTION
1280                "The atmCurrentlyFailingPVclTable is not supported."
1281        VARIATION   atmVclAddrType
1282            ACCESS      not-implemented
1283            DESCRIPTION
1284                "The atmVclAddrTable is not supported."
1285        VARIATION   atmVclAddrRowStatus
1286            ACCESS      not-implemented
1287            DESCRIPTION
1288                "The atmVclAddrTable is not supported."
1289        VARIATION   atmAddrVclAddrType
1290            ACCESS      not-implemented
1291            DESCRIPTION
1292                "The atmAddrVclTable is not supported."
1293        VARIATION   atmVclGenSigDescrIndex
1294            ACCESS      not-implemented
1295            DESCRIPTION
1296                "The atmVclGenTable is not supported."
1297    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
1298        INCLUDES {
1299            atmfM4General,
1300            atmfM4AtmLayerGroup,
1301            atmfM4VpTestGroup,
1302            atmfM4VcTestGroup }
1303        VARIATION   atmfM4NeVersion
1304            ACCESS      not-implemented
1305            DESCRIPTION
1306                "The atmfM4NeVersion object is not supported."
1307        VARIATION   atmfM4NeStartTime
1308            ACCESS      not-implemented
1309            DESCRIPTION
1310                "The atmfM4NeStartTime object is not supported."
1311        VARIATION   atmfM4NeAlarmSeverityIndex
1312            ACCESS      not-implemented
1313            DESCRIPTION
1314                "The atmfM4NeAlarmSeverityIndex is not supported."
1315        VARIATION   atmfM4NeSuppressZeroStats
1316            ACCESS      not-implemented
1317            DESCRIPTION
1318                "The atmfM4NeSuppressZeroStats object is not supported."
1319        VARIATION   atmfM4IfType
1320            ACCESS      not-implemented
1321            DESCRIPTION
1322                "The atmfM4IfType object is not supported."
1323        VARIATION   atmfM4IfSubscriberAddress
1324            ACCESS      not-implemented
1325            DESCRIPTION
1326                "The atmfM4IfSubscriberAddress object is not supported."
1327        VARIATION   atmfM4IfPreferredCarrier
1328            ACCESS      not-implemented
1329            DESCRIPTION
1330                "The atmfM4IfPreferredCarrier object is not supported."
1331        VARIATION   atmfM4IfFarEndCarrierNetwork
1332            ACCESS      not-implemented
1333            DESCRIPTION
1334                "The IfFarEndCarrierNetwork object is not supported."
1335        VARIATION   atmfM4VclSegEndPt
1336            ACCESS      read-only
1337            DESCRIPTION
1338                "An atmfM4VclEntry cannot be created/modified via SNMP."
1339    SUPPORTS    Juniper-UNI-ATM-MIB
1340        INCLUDES {
1341            juniAtmGroup8,
1342            juniAtmAal5Group,
1343            juniAtmSubIfGroup5,
1344            juniAtmVpPingControlGroup,
1345            juniAtmVcPingControlGroup,
1346            juniAtmPingTrapGroup,
1347            juniAtmSvcGroup2,
1348            juniAtmF4OamCircuitGroup,
1349            juniAtmLocationGroup }
1350    ::= { juniAtmVccEndPointAgent 10 }
1351
1352juniAtmVccEndPointAgentV11  AGENT-CAPABILITIES
1353    PRODUCT-RELEASE
1354        "Version 11 of the ATM VCC end point agent subcomponent of the JUNOSe
1355        SNMP agent.  This version of the ATM end point subcomponent is supported
1356        in JUNOSe 7.1 and 7.2 system releases."
1357    STATUS      obsolete
1358    DESCRIPTION
1359        "The MIBs supported by the SNMP agent for the ATM application in
1360        JUNOSe. These capabilities became obsolete when SVC support
1361        was removed."
1362    SUPPORTS    ATM-MIB
1363        INCLUDES {
1364            atmInterfaceTCGroup,
1365            aal5VccGroup,
1366            atmInterfaceConfGroup2,
1367            atmVccTerminationGroup2 }
1368        VARIATION   atmVclAdminStatus
1369            ACCESS      read-only
1370            DESCRIPTION
1371                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1372                Use the Juniper-UNI-ATM-MIB."
1373        VARIATION   atmVclReceiveTrafficDescrIndex
1374            ACCESS      read-only
1375            DESCRIPTION
1376                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1377                Use the Juniper-UNI-ATM-MIB."
1378        VARIATION   atmVclTransmitTrafficDescrIndex
1379            ACCESS      read-only
1380            DESCRIPTION
1381                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1382                Use the Juniper-UNI-ATM-MIB."
1383        VARIATION   atmVccAalType
1384            ACCESS      read-only
1385            DESCRIPTION
1386                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1387                Use the Juniper-UNI-ATM-MIB."
1388        VARIATION   atmVclRowStatus
1389            ACCESS      read-only
1390            DESCRIPTION
1391                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1392                Use the Juniper-UNI-ATM-MIB."
1393        VARIATION   atmVclCastType
1394            ACCESS      read-only
1395            DESCRIPTION
1396                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1397                Use the Juniper-UNI-ATM-MIB."
1398        VARIATION   atmVclConnKind
1399            ACCESS      read-only
1400            DESCRIPTION
1401                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1402                Use the Juniper-UNI-ATM-MIB."
1403    SUPPORTS    ATM2-MIB
1404        INCLUDES {
1405            atmCommonGroup,
1406            atmHostGroup }
1407        VARIATION   atmVplLogicalPortDef
1408            ACCESS      not-implemented
1409            DESCRIPTION
1410                "The atmVplLogicalPortTable is not supported."
1411        VARIATION   atmVplLogicalPortIndex
1412            ACCESS      not-implemented
1413            DESCRIPTION
1414                "The atmVplLogicalPortTable is not supported."
1415        VARIATION   atmCurrentlyFailingPVplTimeStamp
1416            ACCESS      not-implemented
1417            DESCRIPTION
1418                "The atmCurrentlyFailingPVplTable is not supported."
1419        VARIATION   atmCurrentlyFailingPVclTimeStamp
1420            ACCESS      not-implemented
1421            DESCRIPTION
1422                "The atmCurrentlyFailingPVclTable is not supported."
1423        VARIATION   atmVclAddrType
1424            ACCESS      not-implemented
1425            DESCRIPTION
1426                "The atmVclAddrTable is not supported."
1427        VARIATION   atmVclAddrRowStatus
1428            ACCESS      not-implemented
1429            DESCRIPTION
1430                "The atmVclAddrTable is not supported."
1431        VARIATION   atmAddrVclAddrType
1432            ACCESS      not-implemented
1433            DESCRIPTION
1434                "The atmAddrVclTable is not supported."
1435        VARIATION   atmVclGenSigDescrIndex
1436            ACCESS      not-implemented
1437            DESCRIPTION
1438                "The atmVclGenTable is not supported."
1439    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
1440        INCLUDES {
1441            atmfM4General,
1442            atmfM4AtmLayerGroup,
1443            atmfM4VpTestGroup,
1444            atmfM4VcTestGroup }
1445        VARIATION   atmfM4NeVersion
1446            ACCESS      not-implemented
1447            DESCRIPTION
1448                "The atmfM4NeVersion object is not supported."
1449        VARIATION   atmfM4NeStartTime
1450            ACCESS      not-implemented
1451            DESCRIPTION
1452                "The atmfM4NeStartTime object is not supported."
1453        VARIATION   atmfM4NeAlarmSeverityIndex
1454            ACCESS      not-implemented
1455            DESCRIPTION
1456                "The atmfM4NeAlarmSeverityIndex is not supported."
1457        VARIATION   atmfM4NeSuppressZeroStats
1458            ACCESS      not-implemented
1459            DESCRIPTION
1460                "The atmfM4NeSuppressZeroStats object is not supported."
1461        VARIATION   atmfM4IfType
1462            ACCESS      not-implemented
1463            DESCRIPTION
1464                "The atmfM4IfType object is not supported."
1465        VARIATION   atmfM4IfSubscriberAddress
1466            ACCESS      not-implemented
1467            DESCRIPTION
1468                "The atmfM4IfSubscriberAddress object is not supported."
1469        VARIATION   atmfM4IfPreferredCarrier
1470            ACCESS      not-implemented
1471            DESCRIPTION
1472                "The atmfM4IfPreferredCarrier object is not supported."
1473        VARIATION   atmfM4IfFarEndCarrierNetwork
1474            ACCESS      not-implemented
1475            DESCRIPTION
1476                "The IfFarEndCarrierNetwork object is not supported."
1477        VARIATION   atmfM4VclSegEndPt
1478            ACCESS      read-only
1479            DESCRIPTION
1480                "An atmfM4VclEntry cannot be created/modified via SNMP."
1481    SUPPORTS    Juniper-UNI-ATM-MIB
1482        INCLUDES {
1483            juniAtmGroup8,
1484            juniAtmAal5Group,
1485            juniAtmSubIfGroup6,
1486            juniAtmVpPingControlGroup,
1487            juniAtmVcPingControlGroup,
1488            juniAtmPingTrapGroup,
1489            juniAtmSvcGroup2,
1490            juniAtmF4OamCircuitGroup2,
1491            juniAtmLocationGroup,
1492            juniAtmVpStatsGroup }
1493    ::= { juniAtmVccEndPointAgent 11 }
1494
1495juniAtmVccEndPointAgentV12  AGENT-CAPABILITIES
1496    PRODUCT-RELEASE
1497        "Version 12 of the ATM VCC end point agent subcomponent of the JUNOSe
1498        SNMP agent.  This version of the ATM end point subcomponent is supported
1499        in JUNOSe 7.3 and subsequent system releases."
1500    STATUS      current
1501    DESCRIPTION
1502        "The MIBs supported by the SNMP agent for the ATM application in
1503        JUNOSe."
1504    SUPPORTS    ATM-MIB
1505        INCLUDES {
1506            atmInterfaceTCGroup,
1507            aal5VccGroup,
1508            atmInterfaceConfGroup2,
1509            atmVccTerminationGroup2 }
1510        VARIATION   atmVclAdminStatus
1511            ACCESS      read-only
1512            DESCRIPTION
1513                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1514                Use the Juniper-UNI-ATM-MIB."
1515        VARIATION   atmVclReceiveTrafficDescrIndex
1516            ACCESS      read-only
1517            DESCRIPTION
1518                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1519                Use the Juniper-UNI-ATM-MIB."
1520        VARIATION   atmVclTransmitTrafficDescrIndex
1521            ACCESS      read-only
1522            DESCRIPTION
1523                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1524                Use the Juniper-UNI-ATM-MIB."
1525        VARIATION   atmVccAalType
1526            ACCESS      read-only
1527            DESCRIPTION
1528                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1529                Use the Juniper-UNI-ATM-MIB."
1530        VARIATION   atmVclRowStatus
1531            ACCESS      read-only
1532            DESCRIPTION
1533                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1534                Use the Juniper-UNI-ATM-MIB."
1535        VARIATION   atmVclCastType
1536            ACCESS      read-only
1537            DESCRIPTION
1538                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1539                Use the Juniper-UNI-ATM-MIB."
1540        VARIATION   atmVclConnKind
1541            ACCESS      read-only
1542            DESCRIPTION
1543                "The atmVccTerminationGroup2 is not used for configuring VCCs.
1544                Use the Juniper-UNI-ATM-MIB."
1545    SUPPORTS    ATM2-MIB
1546        INCLUDES {
1547            atmCommonGroup,
1548            atmHostGroup }
1549        VARIATION   atmSigSSCOPConEvents
1550            ACCESS      not-implemented
1551            DESCRIPTION
1552                "The atmSigStatTable is not supported."
1553        VARIATION   atmSigSSCOPErrdPdus
1554            ACCESS      not-implemented
1555            DESCRIPTION
1556                "The atmSigStatTable is not supported."
1557        VARIATION   atmSigDetectSetupAttempts
1558            ACCESS      not-implemented
1559            DESCRIPTION
1560                "The atmSigStatTable is not supported."
1561        VARIATION   atmSigEmitSetupAttempts
1562            ACCESS      not-implemented
1563            DESCRIPTION
1564                "The atmSigStatTable is not supported."
1565        VARIATION   atmSigDetectUnavailRoutes
1566            ACCESS      not-implemented
1567            DESCRIPTION
1568                "The atmSigStatTable is not supported."
1569        VARIATION   atmSigEmitUnavailRoutes
1570            ACCESS      not-implemented
1571            DESCRIPTION
1572                "The atmSigStatTable is not supported."
1573        VARIATION   atmSigDetectUnavailResrcs
1574            ACCESS      not-implemented
1575            DESCRIPTION
1576                "The atmSigStatTable is not supported."
1577        VARIATION   atmSigEmitUnavailResrcs
1578            ACCESS      not-implemented
1579            DESCRIPTION
1580                "The atmSigStatTable is not supported."
1581        VARIATION   atmSigDetectCldPtyEvents
1582            ACCESS      not-implemented
1583            DESCRIPTION
1584                "The atmSigStatTable is not supported."
1585        VARIATION   atmSigEmitCldPtyEvents
1586            ACCESS      not-implemented
1587            DESCRIPTION
1588                "The atmSigStatTable is not supported."
1589        VARIATION   atmSigDetectMsgErrors
1590            ACCESS      not-implemented
1591            DESCRIPTION
1592                "The atmSigStatTable is not supported."
1593        VARIATION   atmSigEmitMsgErrors
1594            ACCESS      not-implemented
1595            DESCRIPTION
1596                "The atmSigStatTable is not supported."
1597        VARIATION   atmSigDetectClgPtyEvents
1598            ACCESS      not-implemented
1599            DESCRIPTION
1600                "The atmSigStatTable is not supported."
1601        VARIATION   atmSigEmitClgPtyEvents
1602            ACCESS      not-implemented
1603            DESCRIPTION
1604                "The atmSigStatTable is not supported."
1605        VARIATION   atmSigDetectTimerExpireds
1606            ACCESS      not-implemented
1607            DESCRIPTION
1608                "The atmSigStatTable is not supported."
1609        VARIATION   atmSigEmitTimerExpireds
1610            ACCESS      not-implemented
1611            DESCRIPTION
1612                "The atmSigStatTable is not supported."
1613        VARIATION   atmSigDetectRestarts
1614            ACCESS      not-implemented
1615            DESCRIPTION
1616                "The atmSigStatTable is not supported."
1617        VARIATION   atmSigEmitRestarts
1618            ACCESS      not-implemented
1619            DESCRIPTION
1620                "The atmSigStatTable is not supported."
1621        VARIATION   atmSigInEstabls
1622            ACCESS      not-implemented
1623            DESCRIPTION
1624                "The atmSigStatTable is not supported."
1625        VARIATION   atmSigOutEstabls
1626            ACCESS      not-implemented
1627            DESCRIPTION
1628                "The atmSigStatTable is not supported."
1629        VARIATION   atmVplLogicalPortDef
1630            ACCESS      not-implemented
1631            DESCRIPTION
1632                "The atmVplLogicalPortTable is not supported."
1633        VARIATION   atmVplLogicalPortIndex
1634            ACCESS      not-implemented
1635            DESCRIPTION
1636                "The atmVplLogicalPortTable is not supported."
1637        VARIATION   atmInterfaceConfMaxSvpcVpi
1638            ACCESS      not-implemented
1639            DESCRIPTION
1640                "The atmInterfaceConfMaxSvpcVpi is not supported."
1641        VARIATION   atmInterfaceCurrentMaxSvpcVpi
1642            ACCESS      not-implemented
1643            DESCRIPTION
1644                "The atmInterfaceCurrentMaxSvpcVpi is not supported."
1645        VARIATION   atmInterfaceConfMaxSvccVpi
1646            ACCESS      not-implemented
1647            DESCRIPTION
1648                "The atmInterfaceConfMaxSvccVpi is not supported."
1649        VARIATION   atmInterfaceCurrentMaxSvccVpi
1650            ACCESS      not-implemented
1651            DESCRIPTION
1652                "The atmInterfaceCurrentMaxSvccVpi is not supported."
1653        VARIATION   atmInterfaceConfMinSvccVci
1654            ACCESS      not-implemented
1655            DESCRIPTION
1656                "The atmInterfaceConfMinSvccVci is not supported."
1657        VARIATION   atmInterfaceCurrentMinSvccVci
1658            ACCESS      not-implemented
1659            DESCRIPTION
1660                "The atmInterfaceCurrentMinSvccVci is not supported."
1661        VARIATION   atmIntfSigVccRxTrafficDescrIndex
1662            ACCESS      not-implemented
1663            DESCRIPTION
1664                "The atmIntfSigVccRxTrafficDescrIndex is not supported."
1665        VARIATION   atmIntfSigVccTxTrafficDescrIndex
1666            ACCESS      not-implemented
1667            DESCRIPTION
1668                "The atmIntfSigVccTxTrafficDescrIndex is not supported."
1669        VARIATION   atmIntfLeafSetupFailures
1670            ACCESS      not-implemented
1671            DESCRIPTION
1672                "The atmIntfLeafSetupFailures is not supported."
1673        VARIATION   atmIntfLeafSetupRequests
1674            ACCESS      not-implemented
1675            DESCRIPTION
1676                "The atmIntfLeafSetupRequests is not supported."
1677        VARIATION   atmCurrentlyFailingPVplTimeStamp
1678            ACCESS      not-implemented
1679            DESCRIPTION
1680                "The atmCurrentlyFailingPVplTable is not supported."
1681        VARIATION   atmCurrentlyFailingPVclTimeStamp
1682            ACCESS      not-implemented
1683            DESCRIPTION
1684                "The atmCurrentlyFailingPVclTable is not supported."
1685        VARIATION   atmVclAddrType
1686            ACCESS      not-implemented
1687            DESCRIPTION
1688                "The atmVclAddrTable is not supported."
1689        VARIATION   atmVclAddrRowStatus
1690            ACCESS      not-implemented
1691            DESCRIPTION
1692                "The atmVclAddrTable is not supported."
1693        VARIATION   atmAddrVclAddrType
1694            ACCESS      not-implemented
1695            DESCRIPTION
1696                "The atmAddrVclTable is not supported."
1697        VARIATION   atmVclGenSigDescrIndex
1698            ACCESS      not-implemented
1699            DESCRIPTION
1700                "The atmVclGenTable is not supported."
1701    SUPPORTS    ATM-FORUM-SNMP-M4-MIB
1702        INCLUDES {
1703            atmfM4General,
1704            atmfM4AtmLayerGroup,
1705            atmfM4VpTestGroup,
1706            atmfM4VcTestGroup }
1707        VARIATION   atmfM4NeVersion
1708            ACCESS      not-implemented
1709            DESCRIPTION
1710                "The atmfM4NeVersion object is not supported."
1711        VARIATION   atmfM4NeStartTime
1712            ACCESS      not-implemented
1713            DESCRIPTION
1714                "The atmfM4NeStartTime object is not supported."
1715        VARIATION   atmfM4NeAlarmSeverityIndex
1716            ACCESS      not-implemented
1717            DESCRIPTION
1718                "The atmfM4NeAlarmSeverityIndex is not supported."
1719        VARIATION   atmfM4NeSuppressZeroStats
1720            ACCESS      not-implemented
1721            DESCRIPTION
1722                "The atmfM4NeSuppressZeroStats object is not supported."
1723        VARIATION   atmfM4IfType
1724            ACCESS      not-implemented
1725            DESCRIPTION
1726                "The atmfM4IfType object is not supported."
1727        VARIATION   atmfM4IfSubscriberAddress
1728            ACCESS      not-implemented
1729            DESCRIPTION
1730                "The atmfM4IfSubscriberAddress object is not supported."
1731        VARIATION   atmfM4IfPreferredCarrier
1732            ACCESS      not-implemented
1733            DESCRIPTION
1734                "The atmfM4IfPreferredCarrier object is not supported."
1735        VARIATION   atmfM4IfFarEndCarrierNetwork
1736            ACCESS      not-implemented
1737            DESCRIPTION
1738                "The IfFarEndCarrierNetwork object is not supported."
1739        VARIATION   atmfM4VclSegEndPt
1740            ACCESS      read-only
1741            DESCRIPTION
1742                "An atmfM4VclEntry cannot be created/modified via SNMP."
1743    SUPPORTS    Juniper-UNI-ATM-MIB
1744        INCLUDES {
1745            juniAtmGroup8,
1746            juniAtmAal5Group,
1747            juniAtmSubIfGroup7,
1748            juniAtmVpPingControlGroup,
1749            juniAtmVcPingControlGroup,
1750            juniAtmPingTrapGroup,
1751            juniAtmSvcGroup2,
1752            juniAtmF4OamCircuitGroup2,
1753            juniAtmLocationGroup,
1754            juniAtmVpStatsGroup }
1755    ::= { juniAtmVccEndPointAgent 12 }
1756
1757-- *****************************************************************************
1758-- ATM VP tunnel agent capabilities
1759-- *****************************************************************************
1760juniAtmVpTunnelAgent  OBJECT IDENTIFIER ::= { juniAtmAgent 2 }
1761
1762juniAtmVpTunnelAgentV1  AGENT-CAPABILITIES
1763    PRODUCT-RELEASE
1764        "Version 1 of the ATM VP tunnel subcomponent of the JUNOSe SNMP agent.
1765        This version of the ATM tunnel subcomponent is supported in JUNOSe 3.0
1766        and subsequent system releases."
1767    STATUS      current
1768    DESCRIPTION
1769        "The MIB supported by the SNMP agent for the ATM application in JUNOSe."
1770    SUPPORTS    Juniper-UNI-ATM-MIB
1771        INCLUDES {
1772            juniAtmVpTunnelGroup }
1773    ::= { juniAtmVpTunnelAgent 1 }
1774
1775
1776-- *****************************************************************************
1777-- ATM NBMA interface agent capabilities
1778-- *****************************************************************************
1779juniAtmNbmaAgent  OBJECT IDENTIFIER ::= { juniAtmAgent 3 }
1780
1781juniAtmNbmaAgentV1  AGENT-CAPABILITIES
1782    PRODUCT-RELEASE
1783        "Version 1 of the ATM NBMA interface subcomponent of the JUNOSe SNMP
1784        agent.  This version of the ATM NBMA subcomponent is supported in JUNOSe
1785        3.2 and subsequent system releases."
1786    STATUS      current
1787    DESCRIPTION
1788        "The MIB supported by the SNMP agent for the ATM application in JUNOSe."
1789    SUPPORTS    Juniper-UNI-ATM-MIB
1790        INCLUDES {
1791            juniAtmNbmaMapGroup }
1792    ::= { juniAtmNbmaAgent 1 }
1793
1794
1795-- *****************************************************************************
1796-- ATM Switch agent capabilities
1797--
1798-- This is a placeholder for the agent capabilities for the ATM switch (cross
1799-- connect) subcomponent of the JUNOSe SNMP agent.
1800-- The ATM switch subcomponent has not been supported in a released product.
1801-- *****************************************************************************
1802juniAtmSwitchAgent    OBJECT IDENTIFIER ::= { juniAtmAgent 4 }
1803juniAtmSwitchAgentV1  OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 1 } -- Obsolete
1804juniAtmSwitchAgentV2  OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 2 } -- Obsolete
1805
1806
1807-- *****************************************************************************
1808-- ATM traffic shaping agent capabilities
1809-- *****************************************************************************
1810juniAtmTrafficShapingAgent  OBJECT IDENTIFIER ::= { juniAtmAgent 5 }
1811
1812juniAtmTrafficShapingAgentV1  AGENT-CAPABILITIES
1813    PRODUCT-RELEASE
1814        "Version 1 of the ATM traffic shaping subcomponent of the JUNOSe SNMP
1815        agent.  This version of the ATM traffic shaping subcomponent is
1816        supported in JUNOSe 3.3 and subsequent system releases."
1817    STATUS      current
1818    DESCRIPTION
1819        "The MIB supported by the SNMP agent for the ATM application in JUNOSe."
1820    SUPPORTS    Juniper-UNI-ATM-MIB
1821        INCLUDES {
1822            juniAtmTrafficShapingGroup }
1823    ::= { juniAtmTrafficShapingAgent 1 }
1824
1825END
1826