1# Makefile.in generated by automake 1.14.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright (C) 1998,1999,2000,2001,2003,2010,2011, 18# 2012 Free Software Foundation, Inc. 19# 20# This file is part of GnuPG. 21# 22# GnuPG is free software; you can redistribute it and/or modify 23# it under the terms of the GNU General Public License as published by 24# the Free Software Foundation; either version 3 of the License, or 25# (at your option) any later version. 26# 27# GnuPG is distributed in the hope that it will be useful, 28# but WITHOUT ANY WARRANTY; without even the implied warranty of 29# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 30# GNU General Public License for more details. 31# 32# You should have received a copy of the GNU General Public License 33# along with this program; if not, see <http://www.gnu.org/licenses/>. 34VPATH = @srcdir@ 35am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 36am__make_running_with_option = \ 37 case $${target_option-} in \ 38 ?) ;; \ 39 *) echo "am__make_running_with_option: internal error: invalid" \ 40 "target option '$${target_option-}' specified" >&2; \ 41 exit 1;; \ 42 esac; \ 43 has_opt=no; \ 44 sane_makeflags=$$MAKEFLAGS; \ 45 if $(am__is_gnu_make); then \ 46 sane_makeflags=$$MFLAGS; \ 47 else \ 48 case $$MAKEFLAGS in \ 49 *\\[\ \ ]*) \ 50 bs=\\; \ 51 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 52 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 53 esac; \ 54 fi; \ 55 skip_next=no; \ 56 strip_trailopt () \ 57 { \ 58 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 59 }; \ 60 for flg in $$sane_makeflags; do \ 61 test $$skip_next = yes && { skip_next=no; continue; }; \ 62 case $$flg in \ 63 *=*|--*) continue;; \ 64 -*I) strip_trailopt 'I'; skip_next=yes;; \ 65 -*I?*) strip_trailopt 'I';; \ 66 -*O) strip_trailopt 'O'; skip_next=yes;; \ 67 -*O?*) strip_trailopt 'O';; \ 68 -*l) strip_trailopt 'l'; skip_next=yes;; \ 69 -*l?*) strip_trailopt 'l';; \ 70 -[dEDm]) skip_next=yes;; \ 71 -[JT]) skip_next=yes;; \ 72 esac; \ 73 case $$flg in \ 74 *$$target_option*) has_opt=yes; break;; \ 75 esac; \ 76 done; \ 77 test $$has_opt = yes 78am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 79am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 80pkgdatadir = $(datadir)/@PACKAGE@ 81pkgincludedir = $(includedir)/@PACKAGE@ 82pkglibdir = $(libdir)/@PACKAGE@ 83pkglibexecdir = $(libexecdir)/@PACKAGE@ 84am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 85install_sh_DATA = $(install_sh) -c -m 644 86install_sh_PROGRAM = $(install_sh) -c 87install_sh_SCRIPT = $(install_sh) -c 88INSTALL_HEADER = $(INSTALL_DATA) 89transform = $(program_transform_name) 90NORMAL_INSTALL = : 91PRE_INSTALL = : 92POST_INSTALL = : 93NORMAL_UNINSTALL = : 94PRE_UNINSTALL = : 95POST_UNINSTALL = : 96build_triplet = @build@ 97host_triplet = @host@ 98subdir = . 99DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ 100 $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ 101 $(top_srcdir)/configure $(am__configure_deps) \ 102 $(srcdir)/config.h.in $(top_srcdir)/scripts/mkinstalldirs \ 103 $(top_srcdir)/intl/Makefile.in ABOUT-NLS COPYING THANKS TODO \ 104 scripts/compile scripts/config.guess scripts/config.rpath \ 105 scripts/config.sub scripts/depcomp scripts/install-sh \ 106 scripts/mdate-sh scripts/missing scripts/mkinstalldirs \ 107 scripts/texinfo.tex $(top_srcdir)/scripts/compile \ 108 $(top_srcdir)/scripts/config.guess \ 109 $(top_srcdir)/scripts/config.rpath \ 110 $(top_srcdir)/scripts/config.sub \ 111 $(top_srcdir)/scripts/install-sh $(top_srcdir)/scripts/missing 112ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 113am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \ 114 $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/estream.m4 \ 115 $(top_srcdir)/m4/fcntl-o.m4 $(top_srcdir)/m4/gettext.m4 \ 116 $(top_srcdir)/m4/glibc2.m4 $(top_srcdir)/m4/glibc21.m4 \ 117 $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intdiv0.m4 \ 118 $(top_srcdir)/m4/intl.m4 $(top_srcdir)/m4/intlmacosx.m4 \ 119 $(top_srcdir)/m4/intmax.m4 $(top_srcdir)/m4/inttypes-pri.m4 \ 120 $(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/isc-posix.m4 \ 121 $(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/ldap.m4 \ 122 $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ 123 $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libcurl.m4 \ 124 $(top_srcdir)/m4/libusb.m4 $(top_srcdir)/m4/lock.m4 \ 125 $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/nls.m4 \ 126 $(top_srcdir)/m4/noexecstack.m4 $(top_srcdir)/m4/po.m4 \ 127 $(top_srcdir)/m4/printf-posix.m4 $(top_srcdir)/m4/progtest.m4 \ 128 $(top_srcdir)/m4/readline.m4 $(top_srcdir)/m4/size_max.m4 \ 129 $(top_srcdir)/m4/stdint_h.m4 $(top_srcdir)/m4/tar-ustar.m4 \ 130 $(top_srcdir)/m4/threadlib.m4 $(top_srcdir)/m4/uintmax_t.m4 \ 131 $(top_srcdir)/m4/ulonglong.m4 $(top_srcdir)/m4/visibility.m4 \ 132 $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wint_t.m4 \ 133 $(top_srcdir)/m4/xsize.m4 $(top_srcdir)/acinclude.m4 \ 134 $(top_srcdir)/configure.ac 135am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 136 $(ACLOCAL_M4) 137am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 138 configure.lineno config.status.lineno 139mkinstalldirs = $(SHELL) $(top_srcdir)/scripts/mkinstalldirs 140CONFIG_HEADER = config.h 141CONFIG_CLEAN_FILES = intl/Makefile zlib.h zconf.h bzlib.h 142CONFIG_CLEAN_VPATH_FILES = 143AM_V_P = $(am__v_P_@AM_V@) 144am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 145am__v_P_0 = false 146am__v_P_1 = : 147AM_V_GEN = $(am__v_GEN_@AM_V@) 148am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 149am__v_GEN_0 = @echo " GEN " $@; 150am__v_GEN_1 = 151AM_V_at = $(am__v_at_@AM_V@) 152am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 153am__v_at_0 = @ 154am__v_at_1 = 155SOURCES = 156DIST_SOURCES = 157RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 158 ctags-recursive dvi-recursive html-recursive info-recursive \ 159 install-data-recursive install-dvi-recursive \ 160 install-exec-recursive install-html-recursive \ 161 install-info-recursive install-pdf-recursive \ 162 install-ps-recursive install-recursive installcheck-recursive \ 163 installdirs-recursive pdf-recursive ps-recursive \ 164 tags-recursive uninstall-recursive 165am__can_run_installinfo = \ 166 case $$AM_UPDATE_INFO_DIR in \ 167 n|no|NO) false;; \ 168 *) (install-info --version) >/dev/null 2>&1;; \ 169 esac 170RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 171 distclean-recursive maintainer-clean-recursive 172am__recursive_targets = \ 173 $(RECURSIVE_TARGETS) \ 174 $(RECURSIVE_CLEAN_TARGETS) \ 175 $(am__extra_recursive_targets) 176AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 177 cscope distdir dist dist-all distcheck 178am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 179 $(LISP)config.h.in 180# Read a list of newline-separated strings from the standard input, 181# and print each of them once, without duplicates. Input order is 182# *not* preserved. 183am__uniquify_input = $(AWK) '\ 184 BEGIN { nonempty = 0; } \ 185 { items[$$0] = 1; nonempty = 1; } \ 186 END { if (nonempty) { for (i in items) print i; }; } \ 187' 188# Make sure the list of sources is unique. This is necessary because, 189# e.g., the same source file might be shared among _SOURCES variables 190# for different programs/libraries. 191am__define_uniq_tagged_files = \ 192 list='$(am__tagged_files)'; \ 193 unique=`for i in $$list; do \ 194 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 195 done | $(am__uniquify_input)` 196ETAGS = etags 197CTAGS = ctags 198CSCOPE = cscope 199DIST_SUBDIRS = m4 intl zlib bzlib util mpi cipher tools g10 keyserver \ 200 po doc checks 201DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 202distdir = $(PACKAGE)-$(VERSION) 203top_distdir = $(distdir) 204am__remove_distdir = \ 205 if test -d "$(distdir)"; then \ 206 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 207 && rm -rf "$(distdir)" \ 208 || { sleep 5 && rm -rf "$(distdir)"; }; \ 209 else :; fi 210am__post_remove_distdir = $(am__remove_distdir) 211am__relativize = \ 212 dir0=`pwd`; \ 213 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 214 sed_rest='s,^[^/]*/*,,'; \ 215 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 216 sed_butlast='s,/*[^/]*$$,,'; \ 217 while test -n "$$dir1"; do \ 218 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 219 if test "$$first" != "."; then \ 220 if test "$$first" = ".."; then \ 221 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 222 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 223 else \ 224 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 225 if test "$$first2" = "$$first"; then \ 226 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 227 else \ 228 dir2="../$$dir2"; \ 229 fi; \ 230 dir0="$$dir0"/"$$first"; \ 231 fi; \ 232 fi; \ 233 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 234 done; \ 235 reldir="$$dir2" 236DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 237GZIP_ENV = --best 238DIST_TARGETS = dist-bzip2 dist-gzip 239distuninstallcheck_listfiles = find . -type f -print 240am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 241 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 242distcleancheck_listfiles = find . -type f -print 243ACLOCAL = @ACLOCAL@ 244ALLOCA = @ALLOCA@ 245AMTAR = @AMTAR@ 246AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 247AR = @AR@ 248AUTOCONF = @AUTOCONF@ 249AUTOHEADER = @AUTOHEADER@ 250AUTOMAKE = @AUTOMAKE@ 251AWK = @AWK@ 252BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@ 253CAPLIBS = @CAPLIBS@ 254CATOBJEXT = @CATOBJEXT@ 255CC = @CC@ 256CCAS = @CCAS@ 257CCASDEPMODE = @CCASDEPMODE@ 258CCASFLAGS = @CCASFLAGS@ 259CCDEPMODE = @CCDEPMODE@ 260CC_FOR_BUILD = @CC_FOR_BUILD@ 261CFLAGS = @CFLAGS@ 262CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ 263CPP = @CPP@ 264CPPFLAGS = @CPPFLAGS@ 265CYGPATH_W = @CYGPATH_W@ 266DATADIRNAME = @DATADIRNAME@ 267DEFS = @DEFS@ 268DEPDIR = @DEPDIR@ 269DLLIBS = @DLLIBS@ 270DNSLIBS = @DNSLIBS@ 271ECHO_C = @ECHO_C@ 272ECHO_N = @ECHO_N@ 273ECHO_T = @ECHO_T@ 274EGREP = @EGREP@ 275EXEEXT = @EXEEXT@ 276GENCAT = @GENCAT@ 277GETOPT = @GETOPT@ 278GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ 279GLIBC2 = @GLIBC2@ 280GLIBC21 = @GLIBC21@ 281GMSGFMT = @GMSGFMT@ 282GMSGFMT_015 = @GMSGFMT_015@ 283GPGKEYS_CURL = @GPGKEYS_CURL@ 284GPGKEYS_FINGER = @GPGKEYS_FINGER@ 285GPGKEYS_HKP = @GPGKEYS_HKP@ 286GPGKEYS_LDAP = @GPGKEYS_LDAP@ 287GPGKEYS_MAILTO = @GPGKEYS_MAILTO@ 288GREP = @GREP@ 289HAVE_ASPRINTF = @HAVE_ASPRINTF@ 290HAVE_NEWLOCALE = @HAVE_NEWLOCALE@ 291HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@ 292HAVE_SNPRINTF = @HAVE_SNPRINTF@ 293HAVE_VISIBILITY = @HAVE_VISIBILITY@ 294HAVE_WPRINTF = @HAVE_WPRINTF@ 295INSTALL = @INSTALL@ 296INSTALL_DATA = @INSTALL_DATA@ 297INSTALL_PROGRAM = @INSTALL_PROGRAM@ 298INSTALL_SCRIPT = @INSTALL_SCRIPT@ 299INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 300INSTOBJEXT = @INSTOBJEXT@ 301INTLBISON = @INTLBISON@ 302INTLLIBS = @INTLLIBS@ 303INTLOBJS = @INTLOBJS@ 304INTL_DEFAULT_VERBOSITY = @INTL_DEFAULT_VERBOSITY@ 305INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@ 306INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ 307LDAPLIBS = @LDAPLIBS@ 308LDAP_CPPFLAGS = @LDAP_CPPFLAGS@ 309LDFLAGS = @LDFLAGS@ 310LIBCURL = @LIBCURL@ 311LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@ 312LIBICONV = @LIBICONV@ 313LIBINTL = @LIBINTL@ 314LIBMULTITHREAD = @LIBMULTITHREAD@ 315LIBOBJS = @LIBOBJS@ 316LIBPTH = @LIBPTH@ 317LIBPTH_PREFIX = @LIBPTH_PREFIX@ 318LIBREADLINE = @LIBREADLINE@ 319LIBS = @LIBS@ 320LIBTHREAD = @LIBTHREAD@ 321LIBUSB = @LIBUSB@ 322LIBUSB_CPPFLAGS = @LIBUSB_CPPFLAGS@ 323LTLIBC = @LTLIBC@ 324LTLIBICONV = @LTLIBICONV@ 325LTLIBINTL = @LTLIBINTL@ 326LTLIBMULTITHREAD = @LTLIBMULTITHREAD@ 327LTLIBOBJS = @LTLIBOBJS@ 328LTLIBPTH = @LTLIBPTH@ 329LTLIBTHREAD = @LTLIBTHREAD@ 330MAINT = @MAINT@ 331MAKEINFO = @MAKEINFO@ 332MKDIR_P = @MKDIR_P@ 333MPI_EXTRA_ASM_OBJS = @MPI_EXTRA_ASM_OBJS@ 334MPI_OPT_FLAGS = @MPI_OPT_FLAGS@ 335MPI_SFLAGS = @MPI_SFLAGS@ 336MSGFMT = @MSGFMT@ 337MSGFMT_015 = @MSGFMT_015@ 338MSGMERGE = @MSGMERGE@ 339NETLIBS = @NETLIBS@ 340NM = @NM@ 341NOEXECSTACK_FLAGS = @NOEXECSTACK_FLAGS@ 342OBJEXT = @OBJEXT@ 343PACKAGE = @PACKAGE@ 344PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 345PACKAGE_NAME = @PACKAGE_NAME@ 346PACKAGE_STRING = @PACKAGE_STRING@ 347PACKAGE_TARNAME = @PACKAGE_TARNAME@ 348PACKAGE_URL = @PACKAGE_URL@ 349PACKAGE_VERSION = @PACKAGE_VERSION@ 350PATH_SEPARATOR = @PATH_SEPARATOR@ 351PERL = @PERL@ 352POSUB = @POSUB@ 353PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@ 354RANLIB = @RANLIB@ 355SED = @SED@ 356SENDMAIL = @SENDMAIL@ 357SET_MAKE = @SET_MAKE@ 358SHELL = @SHELL@ 359STRIP = @STRIP@ 360TAR = @TAR@ 361USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ 362USE_NLS = @USE_NLS@ 363VERSION = @VERSION@ 364W32LIBS = @W32LIBS@ 365WINDRES = @WINDRES@ 366WOE32 = @WOE32@ 367WOE32DLL = @WOE32DLL@ 368XGETTEXT = @XGETTEXT@ 369XGETTEXT_015 = @XGETTEXT_015@ 370XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ 371ZLIBS = @ZLIBS@ 372_libcurl_config = @_libcurl_config@ 373_usb_config = @_usb_config@ 374abs_builddir = @abs_builddir@ 375abs_srcdir = @abs_srcdir@ 376abs_top_builddir = @abs_top_builddir@ 377abs_top_srcdir = @abs_top_srcdir@ 378ac_ct_CC = @ac_ct_CC@ 379am__include = @am__include@ 380am__leading_dot = @am__leading_dot@ 381am__quote = @am__quote@ 382am__tar = @am__tar@ 383am__untar = @am__untar@ 384bindir = @bindir@ 385build = @build@ 386build_alias = @build_alias@ 387build_cpu = @build_cpu@ 388build_os = @build_os@ 389build_vendor = @build_vendor@ 390builddir = @builddir@ 391datadir = @datadir@ 392datarootdir = @datarootdir@ 393docdir = @docdir@ 394dvidir = @dvidir@ 395exec_prefix = @exec_prefix@ 396host = @host@ 397host_alias = @host_alias@ 398host_cpu = @host_cpu@ 399host_os = @host_os@ 400host_vendor = @host_vendor@ 401htmldir = @htmldir@ 402includedir = @includedir@ 403infodir = @infodir@ 404install_sh = @install_sh@ 405libdir = @libdir@ 406libexecdir = @libexecdir@ 407localedir = @localedir@ 408localstatedir = @localstatedir@ 409mandir = @mandir@ 410mkdir_p = @mkdir_p@ 411oldincludedir = @oldincludedir@ 412pdfdir = @pdfdir@ 413prefix = @prefix@ 414program_transform_name = @program_transform_name@ 415psdir = @psdir@ 416sbindir = @sbindir@ 417sharedstatedir = @sharedstatedir@ 418srcdir = @srcdir@ 419sysconfdir = @sysconfdir@ 420target_alias = @target_alias@ 421top_build_prefix = @top_build_prefix@ 422top_builddir = @top_builddir@ 423top_srcdir = @top_srcdir@ 424ACLOCAL_AMFLAGS = -I m4 425# We can't use --enable-selinux-support because some of our regression 426# tests are importing secret keys and that is not allowed if 427# selinux-support is enabled. 428DISTCHECK_CONFIGURE_FLAGS = --enable-mailto 429GITLOG_TO_CHANGELOG = gitlog-to-changelog 430@CROSS_COMPILING_FALSE@checks = checks 431@CROSS_COMPILING_TRUE@checks = 432@HAVE_W32_SYSTEM_FALSE@bzlib = 433@HAVE_W32_SYSTEM_TRUE@bzlib = bzlib 434SUBDIRS = m4 intl zlib ${bzlib} util mpi cipher tools \ 435 g10 keyserver po doc ${checks} 436 437EXTRA_DIST = scripts/config.rpath PROJECTS BUGS config.h.in \ 438 autogen.sh ChangeLog-2011 po/ChangeLog-2011 \ 439 util/ChangeLog-2011 scripts/ChangeLog-2011 \ 440 doc/ChangeLog-2011 tools/ChangeLog-2011 \ 441 zlib/ChangeLog-2011 m4/ChangeLog-2011 \ 442 include/ChangeLog-2011 g10/ChangeLog-2011 \ 443 checks/ChangeLog-2011 cipher/ChangeLog-2011 \ 444 intl/ChangeLog-2011 keyserver/ChangeLog-2011 \ 445 tests/ChangeLog-2011 mpi/ChangeLog-2011 446 447DISTCLEANFILES = 448gen_start_date = 2011-12-01T06:00:00 449all: config.h 450 $(MAKE) $(AM_MAKEFLAGS) all-recursive 451 452.SUFFIXES: 453am--refresh: Makefile 454 @: 455$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 456 @for dep in $?; do \ 457 case '$(am__configure_deps)' in \ 458 *$$dep*) \ 459 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ 460 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ 461 && exit 0; \ 462 exit 1;; \ 463 esac; \ 464 done; \ 465 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ 466 $(am__cd) $(top_srcdir) && \ 467 $(AUTOMAKE) --gnu Makefile 468.PRECIOUS: Makefile 469Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 470 @case '$?' in \ 471 *config.status*) \ 472 echo ' $(SHELL) ./config.status'; \ 473 $(SHELL) ./config.status;; \ 474 *) \ 475 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 476 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 477 esac; 478 479$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 480 $(SHELL) ./config.status --recheck 481 482$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 483 $(am__cd) $(srcdir) && $(AUTOCONF) 484$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 485 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 486$(am__aclocal_m4_deps): 487 488config.h: stamp-h1 489 @test -f $@ || rm -f stamp-h1 490 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 491 492stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 493 @rm -f stamp-h1 494 cd $(top_builddir) && $(SHELL) ./config.status config.h 495$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 496 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 497 rm -f stamp-h1 498 touch $@ 499 500distclean-hdr: 501 -rm -f config.h stamp-h1 502intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in 503 cd $(top_builddir) && $(SHELL) ./config.status $@ 504 505# This directory's subdirectories are mostly independent; you can cd 506# into them and run 'make' without going through this Makefile. 507# To change the values of 'make' variables: instead of editing Makefiles, 508# (1) if the variable is set in 'config.status', edit 'config.status' 509# (which will cause the Makefiles to be regenerated when you run 'make'); 510# (2) otherwise, pass the desired values on the 'make' command line. 511$(am__recursive_targets): 512 @fail=; \ 513 if $(am__make_keepgoing); then \ 514 failcom='fail=yes'; \ 515 else \ 516 failcom='exit 1'; \ 517 fi; \ 518 dot_seen=no; \ 519 target=`echo $@ | sed s/-recursive//`; \ 520 case "$@" in \ 521 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 522 *) list='$(SUBDIRS)' ;; \ 523 esac; \ 524 for subdir in $$list; do \ 525 echo "Making $$target in $$subdir"; \ 526 if test "$$subdir" = "."; then \ 527 dot_seen=yes; \ 528 local_target="$$target-am"; \ 529 else \ 530 local_target="$$target"; \ 531 fi; \ 532 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 533 || eval $$failcom; \ 534 done; \ 535 if test "$$dot_seen" = "no"; then \ 536 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 537 fi; test -z "$$fail" 538 539ID: $(am__tagged_files) 540 $(am__define_uniq_tagged_files); mkid -fID $$unique 541tags: tags-recursive 542TAGS: tags 543 544tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 545 set x; \ 546 here=`pwd`; \ 547 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 548 include_option=--etags-include; \ 549 empty_fix=.; \ 550 else \ 551 include_option=--include; \ 552 empty_fix=; \ 553 fi; \ 554 list='$(SUBDIRS)'; for subdir in $$list; do \ 555 if test "$$subdir" = .; then :; else \ 556 test ! -f $$subdir/TAGS || \ 557 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 558 fi; \ 559 done; \ 560 $(am__define_uniq_tagged_files); \ 561 shift; \ 562 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 563 test -n "$$unique" || unique=$$empty_fix; \ 564 if test $$# -gt 0; then \ 565 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 566 "$$@" $$unique; \ 567 else \ 568 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 569 $$unique; \ 570 fi; \ 571 fi 572ctags: ctags-recursive 573 574CTAGS: ctags 575ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 576 $(am__define_uniq_tagged_files); \ 577 test -z "$(CTAGS_ARGS)$$unique" \ 578 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 579 $$unique 580 581GTAGS: 582 here=`$(am__cd) $(top_builddir) && pwd` \ 583 && $(am__cd) $(top_srcdir) \ 584 && gtags -i $(GTAGS_ARGS) "$$here" 585cscope: cscope.files 586 test ! -s cscope.files \ 587 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 588clean-cscope: 589 -rm -f cscope.files 590cscope.files: clean-cscope cscopelist 591cscopelist: cscopelist-recursive 592 593cscopelist-am: $(am__tagged_files) 594 list='$(am__tagged_files)'; \ 595 case "$(srcdir)" in \ 596 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 597 *) sdir=$(subdir)/$(srcdir) ;; \ 598 esac; \ 599 for i in $$list; do \ 600 if test -f "$$i"; then \ 601 echo "$(subdir)/$$i"; \ 602 else \ 603 echo "$$sdir/$$i"; \ 604 fi; \ 605 done >> $(top_builddir)/cscope.files 606 607distclean-tags: 608 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 609 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 610 611distdir: $(DISTFILES) 612 $(am__remove_distdir) 613 test -d "$(distdir)" || mkdir "$(distdir)" 614 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 615 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 616 list='$(DISTFILES)'; \ 617 dist_files=`for file in $$list; do echo $$file; done | \ 618 sed -e "s|^$$srcdirstrip/||;t" \ 619 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 620 case $$dist_files in \ 621 */*) $(MKDIR_P) `echo "$$dist_files" | \ 622 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 623 sort -u` ;; \ 624 esac; \ 625 for file in $$dist_files; do \ 626 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 627 if test -d $$d/$$file; then \ 628 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 629 if test -d "$(distdir)/$$file"; then \ 630 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 631 fi; \ 632 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 633 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 634 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 635 fi; \ 636 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 637 else \ 638 test -f "$(distdir)/$$file" \ 639 || cp -p $$d/$$file "$(distdir)/$$file" \ 640 || exit 1; \ 641 fi; \ 642 done 643 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 644 if test "$$subdir" = .; then :; else \ 645 $(am__make_dryrun) \ 646 || test -d "$(distdir)/$$subdir" \ 647 || $(MKDIR_P) "$(distdir)/$$subdir" \ 648 || exit 1; \ 649 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 650 $(am__relativize); \ 651 new_distdir=$$reldir; \ 652 dir1=$$subdir; dir2="$(top_distdir)"; \ 653 $(am__relativize); \ 654 new_top_distdir=$$reldir; \ 655 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 656 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 657 ($(am__cd) $$subdir && \ 658 $(MAKE) $(AM_MAKEFLAGS) \ 659 top_distdir="$$new_top_distdir" \ 660 distdir="$$new_distdir" \ 661 am__remove_distdir=: \ 662 am__skip_length_check=: \ 663 am__skip_mode_fix=: \ 664 distdir) \ 665 || exit 1; \ 666 fi; \ 667 done 668 $(MAKE) $(AM_MAKEFLAGS) \ 669 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 670 dist-hook 671 -test -n "$(am__skip_mode_fix)" \ 672 || find "$(distdir)" -type d ! -perm -755 \ 673 -exec chmod u+rwx,go+rx {} \; -o \ 674 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 675 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 676 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 677 || chmod -R a+r "$(distdir)" 678 @if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f -print | \ 679 grep '^...................................................................................................' 1>&2; then \ 680 echo 'error: the above filenames are too long' 1>&2; \ 681 exit 1; \ 682 else :; fi 683dist-gzip: distdir 684 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 685 $(am__post_remove_distdir) 686dist-bzip2: distdir 687 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 688 $(am__post_remove_distdir) 689 690dist-lzip: distdir 691 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 692 $(am__post_remove_distdir) 693 694dist-xz: distdir 695 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 696 $(am__post_remove_distdir) 697 698dist-tarZ: distdir 699 @echo WARNING: "Support for shar distribution archives is" \ 700 "deprecated." >&2 701 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 702 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 703 $(am__post_remove_distdir) 704 705dist-shar: distdir 706 @echo WARNING: "Support for distribution archives compressed with" \ 707 "legacy program 'compress' is deprecated." >&2 708 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 709 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 710 $(am__post_remove_distdir) 711 712dist-zip: distdir 713 -rm -f $(distdir).zip 714 zip -rq $(distdir).zip $(distdir) 715 $(am__post_remove_distdir) 716 717dist dist-all: 718 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 719 $(am__post_remove_distdir) 720 721# This target untars the dist file and tries a VPATH configuration. Then 722# it guarantees that the distribution is self-contained by making another 723# tarfile. 724distcheck: dist 725 case '$(DIST_ARCHIVES)' in \ 726 *.tar.gz*) \ 727 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 728 *.tar.bz2*) \ 729 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 730 *.tar.lz*) \ 731 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 732 *.tar.xz*) \ 733 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 734 *.tar.Z*) \ 735 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 736 *.shar.gz*) \ 737 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 738 *.zip*) \ 739 unzip $(distdir).zip ;;\ 740 esac 741 chmod -R a-w $(distdir) 742 chmod u+w $(distdir) 743 mkdir $(distdir)/_build $(distdir)/_inst 744 chmod a-w $(distdir) 745 test -d $(distdir)/_build || exit 0; \ 746 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 747 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 748 && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ 749 && am__cwd=`pwd` \ 750 && $(am__cd) $(distdir)/_build \ 751 && ../configure \ 752 --with-included-gettext \ 753 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 754 $(DISTCHECK_CONFIGURE_FLAGS) \ 755 --srcdir=.. --prefix="$$dc_install_base" \ 756 && $(MAKE) $(AM_MAKEFLAGS) \ 757 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 758 && $(MAKE) $(AM_MAKEFLAGS) check \ 759 && $(MAKE) $(AM_MAKEFLAGS) install \ 760 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 761 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 762 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 763 distuninstallcheck \ 764 && chmod -R a-w "$$dc_install_base" \ 765 && ({ \ 766 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 767 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 768 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 769 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 770 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 771 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 772 && rm -rf "$$dc_destdir" \ 773 && $(MAKE) $(AM_MAKEFLAGS) dist \ 774 && rm -rf $(DIST_ARCHIVES) \ 775 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 776 && cd "$$am__cwd" \ 777 || exit 1 778 $(am__post_remove_distdir) 779 @(echo "$(distdir) archives ready for distribution: "; \ 780 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 781 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 782distuninstallcheck: 783 @test -n '$(distuninstallcheck_dir)' || { \ 784 echo 'ERROR: trying to run $@ with an empty' \ 785 '$$(distuninstallcheck_dir)' >&2; \ 786 exit 1; \ 787 }; \ 788 $(am__cd) '$(distuninstallcheck_dir)' || { \ 789 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 790 exit 1; \ 791 }; \ 792 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 793 || { echo "ERROR: files left after uninstall:" ; \ 794 if test -n "$(DESTDIR)"; then \ 795 echo " (check DESTDIR support)"; \ 796 fi ; \ 797 $(distuninstallcheck_listfiles) ; \ 798 exit 1; } >&2 799distcleancheck: distclean 800 @if test '$(srcdir)' = . ; then \ 801 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 802 exit 1 ; \ 803 fi 804 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 805 || { echo "ERROR: files left in build directory after distclean:" ; \ 806 $(distcleancheck_listfiles) ; \ 807 exit 1; } >&2 808check-am: all-am 809check: check-recursive 810all-am: Makefile config.h 811installdirs: installdirs-recursive 812installdirs-am: 813install: install-recursive 814install-exec: install-exec-recursive 815install-data: install-data-recursive 816uninstall: uninstall-recursive 817 818install-am: all-am 819 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 820 821installcheck: installcheck-recursive 822install-strip: 823 if test -z '$(STRIP)'; then \ 824 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 825 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 826 install; \ 827 else \ 828 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 829 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 830 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 831 fi 832mostlyclean-generic: 833 834clean-generic: 835 836distclean-generic: 837 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 838 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 839 -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) 840 841maintainer-clean-generic: 842 @echo "This command is intended for maintainers to use" 843 @echo "it deletes files that may require special tools to rebuild." 844clean: clean-recursive 845 846clean-am: clean-generic mostlyclean-am 847 848distclean: distclean-recursive 849 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 850 -rm -f Makefile 851distclean-am: clean-am distclean-generic distclean-hdr distclean-tags 852 853dvi: dvi-recursive 854 855dvi-am: 856 857html: html-recursive 858 859html-am: 860 861info: info-recursive 862 863info-am: 864 865install-data-am: 866 867install-dvi: install-dvi-recursive 868 869install-dvi-am: 870 871install-exec-am: 872 873install-html: install-html-recursive 874 875install-html-am: 876 877install-info: install-info-recursive 878 879install-info-am: 880 881install-man: 882 883install-pdf: install-pdf-recursive 884 885install-pdf-am: 886 887install-ps: install-ps-recursive 888 889install-ps-am: 890 891installcheck-am: 892 893maintainer-clean: maintainer-clean-recursive 894 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 895 -rm -rf $(top_srcdir)/autom4te.cache 896 -rm -f Makefile 897maintainer-clean-am: distclean-am maintainer-clean-generic 898 899mostlyclean: mostlyclean-recursive 900 901mostlyclean-am: mostlyclean-generic 902 903pdf: pdf-recursive 904 905pdf-am: 906 907ps: ps-recursive 908 909ps-am: 910 911uninstall-am: 912 913.MAKE: $(am__recursive_targets) all install-am install-strip 914 915.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 916 am--refresh check check-am clean clean-cscope clean-generic \ 917 cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ 918 dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ 919 dist-zip distcheck distclean distclean-generic distclean-hdr \ 920 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 921 dvi-am html html-am info info-am install install-am \ 922 install-data install-data-am install-dvi install-dvi-am \ 923 install-exec install-exec-am install-html install-html-am \ 924 install-info install-info-am install-man install-pdf \ 925 install-pdf-am install-ps install-ps-am install-strip \ 926 installcheck installcheck-am installdirs installdirs-am \ 927 maintainer-clean maintainer-clean-generic mostlyclean \ 928 mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ 929 uninstall-am 930 931 932# We do not install README into the doc directory because that would 933# conflict with GnuPG-2. 934# dist_doc_DATA = README 935 936# Add all the files listed in "distfiles" files to the distribution, 937# apply version numbers to some files and create a VERSION file which 938# we need for the Prereq: patch file trick. 939dist-hook: gen-ChangeLog 940 @set -e; \ 941 for file in `cd $(top_srcdir); \ 942 find scripts mpi include -type f -name distfiles`; do \ 943 dir=`dirname $$file` ; $(mkinstalldirs) $(distdir)/$$dir ; \ 944 for i in distfiles `cat $(top_srcdir)/$$file` ; do \ 945 ln $(top_srcdir)/$$dir/$$i $(distdir)/$$dir/$$i 2> /dev/null \ 946 || cp -p $(top_srcdir)/$$dir/$$i $(distdir)/$$dir/$$i; \ 947 done ; \ 948 done 949 @set -e; \ 950 sed -e 's/@pkg_version@/$(VERSION)/g' \ 951 $(top_srcdir)/scripts/gnupg.spec.in \ 952 > $(distdir)/gnupg.spec 953 echo "$(VERSION)" > $(distdir)/VERSION 954 955distcheck-hook: 956 set -e; ( \ 957 pref="#+macro: gnupg1_" ;\ 958 reldate="$$(date -u +%Y-%m-%d)" ;\ 959 echo "$${pref}ver $(PACKAGE_VERSION)" ;\ 960 echo "$${pref}date $${reldate}" ;\ 961 list='$(DIST_ARCHIVES)'; for i in $$list; do \ 962 case "$$i" in *.tar.bz2) \ 963 echo "$${pref}size $$(wc -c <$$i|awk '{print int($$1/1024)}')k" ;\ 964 echo "$${pref}sha1 $$(sha1sum <$$i|cut -d' ' -f1)" ;\ 965 echo "$${pref}sha2 $$(sha256sum <$$i|cut -d' ' -f1)" ;;\ 966 esac;\ 967 done ) | tee $(distdir).swdb 968.PHONY: gen-ChangeLog 969gen-ChangeLog: 970 set -e; \ 971 if test -e $(top_srcdir)/.git; then \ 972 (cd $(top_srcdir) && \ 973 $(GITLOG_TO_CHANGELOG) --append-dot --tear-off \ 974 --amend=scripts/git-log-fix \ 975 --since=$(gen_start_date) ) > $(distdir)/cl-t; \ 976 cat $(top_srcdir)/scripts/git-log-footer >> $(distdir)/cl-t; \ 977 rm -f $(distdir)/ChangeLog; \ 978 mv $(distdir)/cl-t $(distdir)/ChangeLog; \ 979 fi 980 981# Tell versions [3.59,3.63) of GNU make to not export all variables. 982# Otherwise a system limit (for SysV at least) may be exceeded. 983.NOEXPORT: 984