1# Makefile.in generated by automake 1.14.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Written by Simon Josefsson <simon@josefsson.org>. 18# Copyright (c) 2006-2014 Yubico AB 19# All rights reserved. 20# 21# Redistribution and use in source and binary forms, with or without 22# modification, are permitted provided that the following conditions are 23# met: 24# 25# * Redistributions of source code must retain the above copyright 26# notice, this list of conditions and the following disclaimer. 27# 28# * Redistributions in binary form must reproduce the above 29# copyright notice, this list of conditions and the following 30# disclaimer in the documentation and/or other materials provided 31# with the distribution. 32# 33# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 34# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 35# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 36# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 37# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 38# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 39# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 40# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 41# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 42# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 43# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 44 45 46 47VPATH = @srcdir@ 48am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 49am__make_running_with_option = \ 50 case $${target_option-} in \ 51 ?) ;; \ 52 *) echo "am__make_running_with_option: internal error: invalid" \ 53 "target option '$${target_option-}' specified" >&2; \ 54 exit 1;; \ 55 esac; \ 56 has_opt=no; \ 57 sane_makeflags=$$MAKEFLAGS; \ 58 if $(am__is_gnu_make); then \ 59 sane_makeflags=$$MFLAGS; \ 60 else \ 61 case $$MAKEFLAGS in \ 62 *\\[\ \ ]*) \ 63 bs=\\; \ 64 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 65 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 66 esac; \ 67 fi; \ 68 skip_next=no; \ 69 strip_trailopt () \ 70 { \ 71 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 72 }; \ 73 for flg in $$sane_makeflags; do \ 74 test $$skip_next = yes && { skip_next=no; continue; }; \ 75 case $$flg in \ 76 *=*|--*) continue;; \ 77 -*I) strip_trailopt 'I'; skip_next=yes;; \ 78 -*I?*) strip_trailopt 'I';; \ 79 -*O) strip_trailopt 'O'; skip_next=yes;; \ 80 -*O?*) strip_trailopt 'O';; \ 81 -*l) strip_trailopt 'l'; skip_next=yes;; \ 82 -*l?*) strip_trailopt 'l';; \ 83 -[dEDm]) skip_next=yes;; \ 84 -[JT]) skip_next=yes;; \ 85 esac; \ 86 case $$flg in \ 87 *$$target_option*) has_opt=yes; break;; \ 88 esac; \ 89 done; \ 90 test $$has_opt = yes 91am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 92am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 93pkgdatadir = $(datadir)/@PACKAGE@ 94pkgincludedir = $(includedir)/@PACKAGE@ 95pkglibdir = $(libdir)/@PACKAGE@ 96pkglibexecdir = $(libexecdir)/@PACKAGE@ 97am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 98install_sh_DATA = $(install_sh) -c -m 644 99install_sh_PROGRAM = $(install_sh) -c 100install_sh_SCRIPT = $(install_sh) -c 101INSTALL_HEADER = $(INSTALL_DATA) 102transform = $(program_transform_name) 103NORMAL_INSTALL = : 104PRE_INSTALL = : 105POST_INSTALL = : 106NORMAL_UNINSTALL = : 107PRE_UNINSTALL = : 108POST_UNINSTALL = : 109build_triplet = @build@ 110host_triplet = @host@ 111@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/libyubikey.map 112@HAVE_LD_VERSION_SCRIPT_FALSE@am__append_2 = -export-symbols-regex '^yubikey_.*' 113bin_PROGRAMS = modhex$(EXEEXT) ykparse$(EXEEXT) ykgenerate$(EXEEXT) 114subdir = . 115DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ 116 $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ 117 $(top_srcdir)/configure $(am__configure_deps) \ 118 $(top_srcdir)/build-aux/depcomp $(dist_man_MANS) \ 119 $(include_HEADERS) COPYING THANKS build-aux/ar-lib \ 120 build-aux/compile build-aux/config.guess build-aux/config.sub \ 121 build-aux/depcomp build-aux/install-sh build-aux/missing \ 122 build-aux/ltmain.sh $(top_srcdir)/build-aux/ar-lib \ 123 $(top_srcdir)/build-aux/compile \ 124 $(top_srcdir)/build-aux/config.guess \ 125 $(top_srcdir)/build-aux/config.sub \ 126 $(top_srcdir)/build-aux/install-sh \ 127 $(top_srcdir)/build-aux/ltmain.sh \ 128 $(top_srcdir)/build-aux/missing 129ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 130am__aclocal_m4_deps = $(top_srcdir)/m4/ld-version-script.m4 \ 131 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ 132 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ 133 $(top_srcdir)/m4/lt~obsolete.m4 \ 134 $(top_srcdir)/m4/manywarnings.m4 \ 135 $(top_srcdir)/m4/valgrind-tests.m4 \ 136 $(top_srcdir)/m4/warnings.m4 $(top_srcdir)/configure.ac 137am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 138 $(ACLOCAL_M4) 139am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 140 configure.lineno config.status.lineno 141mkinstalldirs = $(install_sh) -d 142CONFIG_CLEAN_FILES = 143CONFIG_CLEAN_VPATH_FILES = 144am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 145am__vpath_adj = case $$p in \ 146 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 147 *) f=$$p;; \ 148 esac; 149am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 150am__install_max = 40 151am__nobase_strip_setup = \ 152 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 153am__nobase_strip = \ 154 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 155am__nobase_list = $(am__nobase_strip_setup); \ 156 for p in $$list; do echo "$$p $$p"; done | \ 157 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 158 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 159 if (++n[$$2] == $(am__install_max)) \ 160 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 161 END { for (dir in files) print dir, files[dir] }' 162am__base_list = \ 163 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 164 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 165am__uninstall_files_from_dir = { \ 166 test -z "$$files" \ 167 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 168 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 169 $(am__cd) "$$dir" && rm -f $$files; }; \ 170 } 171am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ 172 "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)" 173LTLIBRARIES = $(lib_LTLIBRARIES) 174libyubikey_la_LIBADD = 175am_libyubikey_la_OBJECTS = yktoken.lo ykhex.lo ykcrc.lo ykaes.lo 176libyubikey_la_OBJECTS = $(am_libyubikey_la_OBJECTS) 177AM_V_lt = $(am__v_lt_@AM_V@) 178am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) 179am__v_lt_0 = --silent 180am__v_lt_1 = 181libyubikey_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ 182 $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ 183 $(libyubikey_la_LDFLAGS) $(LDFLAGS) -o $@ 184PROGRAMS = $(bin_PROGRAMS) 185am_modhex_OBJECTS = modhex.$(OBJEXT) 186modhex_OBJECTS = $(am_modhex_OBJECTS) 187modhex_DEPENDENCIES = ./libyubikey.la 188am_ykgenerate_OBJECTS = ykgenerate.$(OBJEXT) 189ykgenerate_OBJECTS = $(am_ykgenerate_OBJECTS) 190ykgenerate_DEPENDENCIES = ./libyubikey.la 191am_ykparse_OBJECTS = ykparse.$(OBJEXT) 192ykparse_OBJECTS = $(am_ykparse_OBJECTS) 193ykparse_DEPENDENCIES = ./libyubikey.la 194AM_V_P = $(am__v_P_@AM_V@) 195am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 196am__v_P_0 = false 197am__v_P_1 = : 198AM_V_GEN = $(am__v_GEN_@AM_V@) 199am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 200am__v_GEN_0 = @echo " GEN " $@; 201am__v_GEN_1 = 202AM_V_at = $(am__v_at_@AM_V@) 203am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 204am__v_at_0 = @ 205am__v_at_1 = 206DEFAULT_INCLUDES = -I.@am__isrc@ 207depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp 208am__depfiles_maybe = depfiles 209am__mv = mv -f 210COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ 211 $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) 212LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ 213 $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ 214 $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ 215 $(AM_CFLAGS) $(CFLAGS) 216AM_V_CC = $(am__v_CC_@AM_V@) 217am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) 218am__v_CC_0 = @echo " CC " $@; 219am__v_CC_1 = 220CCLD = $(CC) 221LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ 222 $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ 223 $(AM_LDFLAGS) $(LDFLAGS) -o $@ 224AM_V_CCLD = $(am__v_CCLD_@AM_V@) 225am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) 226am__v_CCLD_0 = @echo " CCLD " $@; 227am__v_CCLD_1 = 228SOURCES = $(libyubikey_la_SOURCES) $(modhex_SOURCES) \ 229 $(ykgenerate_SOURCES) $(ykparse_SOURCES) 230DIST_SOURCES = $(libyubikey_la_SOURCES) $(modhex_SOURCES) \ 231 $(ykgenerate_SOURCES) $(ykparse_SOURCES) 232RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 233 ctags-recursive dvi-recursive html-recursive info-recursive \ 234 install-data-recursive install-dvi-recursive \ 235 install-exec-recursive install-html-recursive \ 236 install-info-recursive install-pdf-recursive \ 237 install-ps-recursive install-recursive installcheck-recursive \ 238 installdirs-recursive pdf-recursive ps-recursive \ 239 tags-recursive uninstall-recursive 240am__can_run_installinfo = \ 241 case $$AM_UPDATE_INFO_DIR in \ 242 n|no|NO) false;; \ 243 *) (install-info --version) >/dev/null 2>&1;; \ 244 esac 245man1dir = $(mandir)/man1 246NROFF = nroff 247MANS = $(dist_man_MANS) 248HEADERS = $(include_HEADERS) 249RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 250 distclean-recursive maintainer-clean-recursive 251am__recursive_targets = \ 252 $(RECURSIVE_TARGETS) \ 253 $(RECURSIVE_CLEAN_TARGETS) \ 254 $(am__extra_recursive_targets) 255AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 256 cscope distdir dist dist-all distcheck 257am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 258# Read a list of newline-separated strings from the standard input, 259# and print each of them once, without duplicates. Input order is 260# *not* preserved. 261am__uniquify_input = $(AWK) '\ 262 BEGIN { nonempty = 0; } \ 263 { items[$$0] = 1; nonempty = 1; } \ 264 END { if (nonempty) { for (i in items) print i; }; } \ 265' 266# Make sure the list of sources is unique. This is necessary because, 267# e.g., the same source file might be shared among _SOURCES variables 268# for different programs/libraries. 269am__define_uniq_tagged_files = \ 270 list='$(am__tagged_files)'; \ 271 unique=`for i in $$list; do \ 272 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 273 done | $(am__uniquify_input)` 274ETAGS = etags 275CTAGS = ctags 276CSCOPE = cscope 277DIST_SUBDIRS = $(SUBDIRS) 278DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 279distdir = $(PACKAGE)-$(VERSION) 280top_distdir = $(distdir) 281am__remove_distdir = \ 282 if test -d "$(distdir)"; then \ 283 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 284 && rm -rf "$(distdir)" \ 285 || { sleep 5 && rm -rf "$(distdir)"; }; \ 286 else :; fi 287am__post_remove_distdir = $(am__remove_distdir) 288am__relativize = \ 289 dir0=`pwd`; \ 290 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 291 sed_rest='s,^[^/]*/*,,'; \ 292 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 293 sed_butlast='s,/*[^/]*$$,,'; \ 294 while test -n "$$dir1"; do \ 295 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 296 if test "$$first" != "."; then \ 297 if test "$$first" = ".."; then \ 298 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 299 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 300 else \ 301 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 302 if test "$$first2" = "$$first"; then \ 303 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 304 else \ 305 dir2="../$$dir2"; \ 306 fi; \ 307 dir0="$$dir0"/"$$first"; \ 308 fi; \ 309 fi; \ 310 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 311 done; \ 312 reldir="$$dir2" 313DIST_ARCHIVES = $(distdir).tar.gz 314GZIP_ENV = --best 315DIST_TARGETS = dist-gzip 316distuninstallcheck_listfiles = find . -type f -print 317am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 318 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 319distcleancheck_listfiles = find . -type f -print 320A2X = @A2X@ 321ACLOCAL = @ACLOCAL@ 322AMTAR = @AMTAR@ 323AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 324AR = @AR@ 325AS = @AS@ 326AUTOCONF = @AUTOCONF@ 327AUTOHEADER = @AUTOHEADER@ 328AUTOMAKE = @AUTOMAKE@ 329AWK = @AWK@ 330CC = @CC@ 331CCDEPMODE = @CCDEPMODE@ 332CFLAGS = @CFLAGS@ 333CPP = @CPP@ 334CPPFLAGS = @CPPFLAGS@ 335CYGPATH_W = @CYGPATH_W@ 336DEFS = @DEFS@ 337DEPDIR = @DEPDIR@ 338DLLTOOL = @DLLTOOL@ 339DSYMUTIL = @DSYMUTIL@ 340DUMPBIN = @DUMPBIN@ 341ECHO_C = @ECHO_C@ 342ECHO_N = @ECHO_N@ 343ECHO_T = @ECHO_T@ 344EGREP = @EGREP@ 345EXEEXT = @EXEEXT@ 346FGREP = @FGREP@ 347GREP = @GREP@ 348INSTALL = @INSTALL@ 349INSTALL_DATA = @INSTALL_DATA@ 350INSTALL_PROGRAM = @INSTALL_PROGRAM@ 351INSTALL_SCRIPT = @INSTALL_SCRIPT@ 352INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 353LD = @LD@ 354LDFLAGS = @LDFLAGS@ 355LIBOBJS = @LIBOBJS@ 356LIBS = @LIBS@ 357LIBTOOL = @LIBTOOL@ 358LIPO = @LIPO@ 359LN_S = @LN_S@ 360LTLIBOBJS = @LTLIBOBJS@ 361LT_AGE = @LT_AGE@ 362LT_CURRENT = @LT_CURRENT@ 363LT_REVISION = @LT_REVISION@ 364MAKEINFO = @MAKEINFO@ 365MANIFEST_TOOL = @MANIFEST_TOOL@ 366MKDIR_P = @MKDIR_P@ 367NM = @NM@ 368NMEDIT = @NMEDIT@ 369OBJDUMP = @OBJDUMP@ 370OBJEXT = @OBJEXT@ 371OTOOL = @OTOOL@ 372OTOOL64 = @OTOOL64@ 373PACKAGE = @PACKAGE@ 374PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 375PACKAGE_NAME = @PACKAGE_NAME@ 376PACKAGE_STRING = @PACKAGE_STRING@ 377PACKAGE_TARNAME = @PACKAGE_TARNAME@ 378PACKAGE_URL = @PACKAGE_URL@ 379PACKAGE_VERSION = @PACKAGE_VERSION@ 380PATH_SEPARATOR = @PATH_SEPARATOR@ 381RANLIB = @RANLIB@ 382SED = @SED@ 383SET_MAKE = @SET_MAKE@ 384SHELL = @SHELL@ 385STRIP = @STRIP@ 386VALGRIND = @VALGRIND@ 387VERSION = @VERSION@ 388WARN_CFLAGS = @WARN_CFLAGS@ 389abs_builddir = @abs_builddir@ 390abs_srcdir = @abs_srcdir@ 391abs_top_builddir = @abs_top_builddir@ 392abs_top_srcdir = @abs_top_srcdir@ 393ac_ct_AR = @ac_ct_AR@ 394ac_ct_CC = @ac_ct_CC@ 395ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 396am__include = @am__include@ 397am__leading_dot = @am__leading_dot@ 398am__quote = @am__quote@ 399am__tar = @am__tar@ 400am__untar = @am__untar@ 401bindir = @bindir@ 402build = @build@ 403build_alias = @build_alias@ 404build_cpu = @build_cpu@ 405build_os = @build_os@ 406build_vendor = @build_vendor@ 407builddir = @builddir@ 408datadir = @datadir@ 409datarootdir = @datarootdir@ 410docdir = @docdir@ 411dvidir = @dvidir@ 412exec_prefix = @exec_prefix@ 413host = @host@ 414host_alias = @host_alias@ 415host_cpu = @host_cpu@ 416host_os = @host_os@ 417host_vendor = @host_vendor@ 418htmldir = @htmldir@ 419includedir = @includedir@ 420infodir = @infodir@ 421install_sh = @install_sh@ 422libdir = @libdir@ 423libexecdir = @libexecdir@ 424localedir = @localedir@ 425localstatedir = @localstatedir@ 426mandir = @mandir@ 427mkdir_p = @mkdir_p@ 428oldincludedir = @oldincludedir@ 429pdfdir = @pdfdir@ 430prefix = @prefix@ 431program_transform_name = @program_transform_name@ 432psdir = @psdir@ 433sbindir = @sbindir@ 434sharedstatedir = @sharedstatedir@ 435srcdir = @srcdir@ 436sysconfdir = @sysconfdir@ 437target_alias = @target_alias@ 438top_build_prefix = @top_build_prefix@ 439top_builddir = @top_builddir@ 440top_srcdir = @top_srcdir@ 441SUBDIRS = . tests 442ACLOCAL_AMFLAGS = -I m4 443DISTCHECK_CONFIGURE_FLAGS = --enable-gcc-warnings 444AM_CFLAGS = $(WARN_CFLAGS) 445 446# The library. 447lib_LTLIBRARIES = libyubikey.la 448include_HEADERS = yubikey.h 449libyubikey_la_SOURCES = yktoken.c ykhex.c ykcrc.c ykaes.c \ 450 libyubikey.map 451libyubikey_la_LDFLAGS = -no-undefined -version-info \ 452 $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) $(am__append_1) \ 453 $(am__append_2) 454modhex_SOURCES = modhex.c 455modhex_LDADD = ./libyubikey.la 456ykparse_SOURCES = ykparse.c 457ykparse_LDADD = ./libyubikey.la 458ykgenerate_SOURCES = ykgenerate.c 459ykgenerate_LDADD = ./libyubikey.la 460dist_man_MANS = modhex.1 ykparse.1 ykgenerate.1 461DISTCLEANFILES = $(dist_man_MANS) 462SUFFIXES = .1.txt .1 463MANSOURCES = modhex.1.txt ykparse.1.txt ykgenerate.1.txt 464EXTRA_DIST = $(MANSOURCES) simple.mk THANKS 465PROJECT = yubico-c 466all: all-recursive 467 468.SUFFIXES: 469.SUFFIXES: .1.txt .1 .c .lo .o .obj 470am--refresh: Makefile 471 @: 472$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 473 @for dep in $?; do \ 474 case '$(am__configure_deps)' in \ 475 *$$dep*) \ 476 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ 477 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ 478 && exit 0; \ 479 exit 1;; \ 480 esac; \ 481 done; \ 482 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ 483 $(am__cd) $(top_srcdir) && \ 484 $(AUTOMAKE) --gnu Makefile 485.PRECIOUS: Makefile 486Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 487 @case '$?' in \ 488 *config.status*) \ 489 echo ' $(SHELL) ./config.status'; \ 490 $(SHELL) ./config.status;; \ 491 *) \ 492 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 493 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 494 esac; 495 496$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 497 $(SHELL) ./config.status --recheck 498 499$(top_srcdir)/configure: $(am__configure_deps) 500 $(am__cd) $(srcdir) && $(AUTOCONF) 501$(ACLOCAL_M4): $(am__aclocal_m4_deps) 502 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 503$(am__aclocal_m4_deps): 504 505install-libLTLIBRARIES: $(lib_LTLIBRARIES) 506 @$(NORMAL_INSTALL) 507 @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ 508 list2=; for p in $$list; do \ 509 if test -f $$p; then \ 510 list2="$$list2 $$p"; \ 511 else :; fi; \ 512 done; \ 513 test -z "$$list2" || { \ 514 echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ 515 $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ 516 echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ 517 $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ 518 } 519 520uninstall-libLTLIBRARIES: 521 @$(NORMAL_UNINSTALL) 522 @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ 523 for p in $$list; do \ 524 $(am__strip_dir) \ 525 echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ 526 $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ 527 done 528 529clean-libLTLIBRARIES: 530 -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) 531 @list='$(lib_LTLIBRARIES)'; \ 532 locs=`for p in $$list; do echo $$p; done | \ 533 sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ 534 sort -u`; \ 535 test -z "$$locs" || { \ 536 echo rm -f $${locs}; \ 537 rm -f $${locs}; \ 538 } 539 540libyubikey.la: $(libyubikey_la_OBJECTS) $(libyubikey_la_DEPENDENCIES) $(EXTRA_libyubikey_la_DEPENDENCIES) 541 $(AM_V_CCLD)$(libyubikey_la_LINK) -rpath $(libdir) $(libyubikey_la_OBJECTS) $(libyubikey_la_LIBADD) $(LIBS) 542install-binPROGRAMS: $(bin_PROGRAMS) 543 @$(NORMAL_INSTALL) 544 @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ 545 if test -n "$$list"; then \ 546 echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ 547 $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ 548 fi; \ 549 for p in $$list; do echo "$$p $$p"; done | \ 550 sed 's/$(EXEEXT)$$//' | \ 551 while read p p1; do if test -f $$p \ 552 || test -f $$p1 \ 553 ; then echo "$$p"; echo "$$p"; else :; fi; \ 554 done | \ 555 sed -e 'p;s,.*/,,;n;h' \ 556 -e 's|.*|.|' \ 557 -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ 558 sed 'N;N;N;s,\n, ,g' | \ 559 $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ 560 { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ 561 if ($$2 == $$4) files[d] = files[d] " " $$1; \ 562 else { print "f", $$3 "/" $$4, $$1; } } \ 563 END { for (d in files) print "f", d, files[d] }' | \ 564 while read type dir files; do \ 565 if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ 566 test -z "$$files" || { \ 567 echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ 568 $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ 569 } \ 570 ; done 571 572uninstall-binPROGRAMS: 573 @$(NORMAL_UNINSTALL) 574 @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ 575 files=`for p in $$list; do echo "$$p"; done | \ 576 sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ 577 -e 's/$$/$(EXEEXT)/' \ 578 `; \ 579 test -n "$$list" || exit 0; \ 580 echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ 581 cd "$(DESTDIR)$(bindir)" && rm -f $$files 582 583clean-binPROGRAMS: 584 @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ 585 echo " rm -f" $$list; \ 586 rm -f $$list || exit $$?; \ 587 test -n "$(EXEEXT)" || exit 0; \ 588 list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ 589 echo " rm -f" $$list; \ 590 rm -f $$list 591 592modhex$(EXEEXT): $(modhex_OBJECTS) $(modhex_DEPENDENCIES) $(EXTRA_modhex_DEPENDENCIES) 593 @rm -f modhex$(EXEEXT) 594 $(AM_V_CCLD)$(LINK) $(modhex_OBJECTS) $(modhex_LDADD) $(LIBS) 595 596ykgenerate$(EXEEXT): $(ykgenerate_OBJECTS) $(ykgenerate_DEPENDENCIES) $(EXTRA_ykgenerate_DEPENDENCIES) 597 @rm -f ykgenerate$(EXEEXT) 598 $(AM_V_CCLD)$(LINK) $(ykgenerate_OBJECTS) $(ykgenerate_LDADD) $(LIBS) 599 600ykparse$(EXEEXT): $(ykparse_OBJECTS) $(ykparse_DEPENDENCIES) $(EXTRA_ykparse_DEPENDENCIES) 601 @rm -f ykparse$(EXEEXT) 602 $(AM_V_CCLD)$(LINK) $(ykparse_OBJECTS) $(ykparse_LDADD) $(LIBS) 603 604mostlyclean-compile: 605 -rm -f *.$(OBJEXT) 606 607distclean-compile: 608 -rm -f *.tab.c 609 610@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/modhex.Po@am__quote@ 611@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ykaes.Plo@am__quote@ 612@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ykcrc.Plo@am__quote@ 613@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ykgenerate.Po@am__quote@ 614@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ykhex.Plo@am__quote@ 615@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ykparse.Po@am__quote@ 616@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yktoken.Plo@am__quote@ 617 618.c.o: 619@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< 620@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 621@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ 622@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 623@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< 624 625.c.obj: 626@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` 627@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 628@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ 629@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 630@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` 631 632.c.lo: 633@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< 634@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo 635@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ 636@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 637@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< 638 639mostlyclean-libtool: 640 -rm -f *.lo 641 642clean-libtool: 643 -rm -rf .libs _libs 644 645distclean-libtool: 646 -rm -f libtool config.lt 647install-man1: $(dist_man_MANS) 648 @$(NORMAL_INSTALL) 649 @list1=''; \ 650 list2='$(dist_man_MANS)'; \ 651 test -n "$(man1dir)" \ 652 && test -n "`echo $$list1$$list2`" \ 653 || exit 0; \ 654 echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ 655 $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ 656 { for i in $$list1; do echo "$$i"; done; \ 657 if test -n "$$list2"; then \ 658 for i in $$list2; do echo "$$i"; done \ 659 | sed -n '/\.1[a-z]*$$/p'; \ 660 fi; \ 661 } | while read p; do \ 662 if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ 663 echo "$$d$$p"; echo "$$p"; \ 664 done | \ 665 sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ 666 -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ 667 sed 'N;N;s,\n, ,g' | { \ 668 list=; while read file base inst; do \ 669 if test "$$base" = "$$inst"; then list="$$list $$file"; else \ 670 echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ 671 $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ 672 fi; \ 673 done; \ 674 for i in $$list; do echo "$$i"; done | $(am__base_list) | \ 675 while read files; do \ 676 test -z "$$files" || { \ 677 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ 678 $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ 679 done; } 680 681uninstall-man1: 682 @$(NORMAL_UNINSTALL) 683 @list=''; test -n "$(man1dir)" || exit 0; \ 684 files=`{ for i in $$list; do echo "$$i"; done; \ 685 l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ 686 sed -n '/\.1[a-z]*$$/p'; \ 687 } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ 688 -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ 689 dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) 690install-includeHEADERS: $(include_HEADERS) 691 @$(NORMAL_INSTALL) 692 @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ 693 if test -n "$$list"; then \ 694 echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ 695 $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ 696 fi; \ 697 for p in $$list; do \ 698 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 699 echo "$$d$$p"; \ 700 done | $(am__base_list) | \ 701 while read files; do \ 702 echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ 703 $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ 704 done 705 706uninstall-includeHEADERS: 707 @$(NORMAL_UNINSTALL) 708 @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ 709 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 710 dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) 711 712# This directory's subdirectories are mostly independent; you can cd 713# into them and run 'make' without going through this Makefile. 714# To change the values of 'make' variables: instead of editing Makefiles, 715# (1) if the variable is set in 'config.status', edit 'config.status' 716# (which will cause the Makefiles to be regenerated when you run 'make'); 717# (2) otherwise, pass the desired values on the 'make' command line. 718$(am__recursive_targets): 719 @fail=; \ 720 if $(am__make_keepgoing); then \ 721 failcom='fail=yes'; \ 722 else \ 723 failcom='exit 1'; \ 724 fi; \ 725 dot_seen=no; \ 726 target=`echo $@ | sed s/-recursive//`; \ 727 case "$@" in \ 728 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 729 *) list='$(SUBDIRS)' ;; \ 730 esac; \ 731 for subdir in $$list; do \ 732 echo "Making $$target in $$subdir"; \ 733 if test "$$subdir" = "."; then \ 734 dot_seen=yes; \ 735 local_target="$$target-am"; \ 736 else \ 737 local_target="$$target"; \ 738 fi; \ 739 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 740 || eval $$failcom; \ 741 done; \ 742 if test "$$dot_seen" = "no"; then \ 743 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 744 fi; test -z "$$fail" 745 746ID: $(am__tagged_files) 747 $(am__define_uniq_tagged_files); mkid -fID $$unique 748tags: tags-recursive 749TAGS: tags 750 751tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 752 set x; \ 753 here=`pwd`; \ 754 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 755 include_option=--etags-include; \ 756 empty_fix=.; \ 757 else \ 758 include_option=--include; \ 759 empty_fix=; \ 760 fi; \ 761 list='$(SUBDIRS)'; for subdir in $$list; do \ 762 if test "$$subdir" = .; then :; else \ 763 test ! -f $$subdir/TAGS || \ 764 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 765 fi; \ 766 done; \ 767 $(am__define_uniq_tagged_files); \ 768 shift; \ 769 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 770 test -n "$$unique" || unique=$$empty_fix; \ 771 if test $$# -gt 0; then \ 772 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 773 "$$@" $$unique; \ 774 else \ 775 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 776 $$unique; \ 777 fi; \ 778 fi 779ctags: ctags-recursive 780 781CTAGS: ctags 782ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 783 $(am__define_uniq_tagged_files); \ 784 test -z "$(CTAGS_ARGS)$$unique" \ 785 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 786 $$unique 787 788GTAGS: 789 here=`$(am__cd) $(top_builddir) && pwd` \ 790 && $(am__cd) $(top_srcdir) \ 791 && gtags -i $(GTAGS_ARGS) "$$here" 792cscope: cscope.files 793 test ! -s cscope.files \ 794 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 795clean-cscope: 796 -rm -f cscope.files 797cscope.files: clean-cscope cscopelist 798cscopelist: cscopelist-recursive 799 800cscopelist-am: $(am__tagged_files) 801 list='$(am__tagged_files)'; \ 802 case "$(srcdir)" in \ 803 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 804 *) sdir=$(subdir)/$(srcdir) ;; \ 805 esac; \ 806 for i in $$list; do \ 807 if test -f "$$i"; then \ 808 echo "$(subdir)/$$i"; \ 809 else \ 810 echo "$$sdir/$$i"; \ 811 fi; \ 812 done >> $(top_builddir)/cscope.files 813 814distclean-tags: 815 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 816 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 817 818distdir: $(DISTFILES) 819 $(am__remove_distdir) 820 test -d "$(distdir)" || mkdir "$(distdir)" 821 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 822 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 823 list='$(DISTFILES)'; \ 824 dist_files=`for file in $$list; do echo $$file; done | \ 825 sed -e "s|^$$srcdirstrip/||;t" \ 826 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 827 case $$dist_files in \ 828 */*) $(MKDIR_P) `echo "$$dist_files" | \ 829 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 830 sort -u` ;; \ 831 esac; \ 832 for file in $$dist_files; do \ 833 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 834 if test -d $$d/$$file; then \ 835 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 836 if test -d "$(distdir)/$$file"; then \ 837 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 838 fi; \ 839 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 840 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 841 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 842 fi; \ 843 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 844 else \ 845 test -f "$(distdir)/$$file" \ 846 || cp -p $$d/$$file "$(distdir)/$$file" \ 847 || exit 1; \ 848 fi; \ 849 done 850 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 851 if test "$$subdir" = .; then :; else \ 852 $(am__make_dryrun) \ 853 || test -d "$(distdir)/$$subdir" \ 854 || $(MKDIR_P) "$(distdir)/$$subdir" \ 855 || exit 1; \ 856 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 857 $(am__relativize); \ 858 new_distdir=$$reldir; \ 859 dir1=$$subdir; dir2="$(top_distdir)"; \ 860 $(am__relativize); \ 861 new_top_distdir=$$reldir; \ 862 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 863 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 864 ($(am__cd) $$subdir && \ 865 $(MAKE) $(AM_MAKEFLAGS) \ 866 top_distdir="$$new_top_distdir" \ 867 distdir="$$new_distdir" \ 868 am__remove_distdir=: \ 869 am__skip_length_check=: \ 870 am__skip_mode_fix=: \ 871 distdir) \ 872 || exit 1; \ 873 fi; \ 874 done 875 -test -n "$(am__skip_mode_fix)" \ 876 || find "$(distdir)" -type d ! -perm -755 \ 877 -exec chmod u+rwx,go+rx {} \; -o \ 878 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 879 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 880 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 881 || chmod -R a+r "$(distdir)" 882dist-gzip: distdir 883 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 884 $(am__post_remove_distdir) 885 886dist-bzip2: distdir 887 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 888 $(am__post_remove_distdir) 889 890dist-lzip: distdir 891 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 892 $(am__post_remove_distdir) 893 894dist-xz: distdir 895 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 896 $(am__post_remove_distdir) 897 898dist-tarZ: distdir 899 @echo WARNING: "Support for shar distribution archives is" \ 900 "deprecated." >&2 901 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 902 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 903 $(am__post_remove_distdir) 904 905dist-shar: distdir 906 @echo WARNING: "Support for distribution archives compressed with" \ 907 "legacy program 'compress' is deprecated." >&2 908 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 909 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 910 $(am__post_remove_distdir) 911 912dist-zip: distdir 913 -rm -f $(distdir).zip 914 zip -rq $(distdir).zip $(distdir) 915 $(am__post_remove_distdir) 916 917dist dist-all: 918 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 919 $(am__post_remove_distdir) 920 921# This target untars the dist file and tries a VPATH configuration. Then 922# it guarantees that the distribution is self-contained by making another 923# tarfile. 924distcheck: dist 925 case '$(DIST_ARCHIVES)' in \ 926 *.tar.gz*) \ 927 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 928 *.tar.bz2*) \ 929 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 930 *.tar.lz*) \ 931 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 932 *.tar.xz*) \ 933 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 934 *.tar.Z*) \ 935 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 936 *.shar.gz*) \ 937 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 938 *.zip*) \ 939 unzip $(distdir).zip ;;\ 940 esac 941 chmod -R a-w $(distdir) 942 chmod u+w $(distdir) 943 mkdir $(distdir)/_build $(distdir)/_inst 944 chmod a-w $(distdir) 945 test -d $(distdir)/_build || exit 0; \ 946 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 947 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 948 && am__cwd=`pwd` \ 949 && $(am__cd) $(distdir)/_build \ 950 && ../configure \ 951 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 952 $(DISTCHECK_CONFIGURE_FLAGS) \ 953 --srcdir=.. --prefix="$$dc_install_base" \ 954 && $(MAKE) $(AM_MAKEFLAGS) \ 955 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 956 && $(MAKE) $(AM_MAKEFLAGS) check \ 957 && $(MAKE) $(AM_MAKEFLAGS) install \ 958 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 959 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 960 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 961 distuninstallcheck \ 962 && chmod -R a-w "$$dc_install_base" \ 963 && ({ \ 964 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 965 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 966 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 967 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 968 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 969 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 970 && rm -rf "$$dc_destdir" \ 971 && $(MAKE) $(AM_MAKEFLAGS) dist \ 972 && rm -rf $(DIST_ARCHIVES) \ 973 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 974 && cd "$$am__cwd" \ 975 || exit 1 976 $(am__post_remove_distdir) 977 @(echo "$(distdir) archives ready for distribution: "; \ 978 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 979 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 980distuninstallcheck: 981 @test -n '$(distuninstallcheck_dir)' || { \ 982 echo 'ERROR: trying to run $@ with an empty' \ 983 '$$(distuninstallcheck_dir)' >&2; \ 984 exit 1; \ 985 }; \ 986 $(am__cd) '$(distuninstallcheck_dir)' || { \ 987 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 988 exit 1; \ 989 }; \ 990 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 991 || { echo "ERROR: files left after uninstall:" ; \ 992 if test -n "$(DESTDIR)"; then \ 993 echo " (check DESTDIR support)"; \ 994 fi ; \ 995 $(distuninstallcheck_listfiles) ; \ 996 exit 1; } >&2 997distcleancheck: distclean 998 @if test '$(srcdir)' = . ; then \ 999 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 1000 exit 1 ; \ 1001 fi 1002 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 1003 || { echo "ERROR: files left in build directory after distclean:" ; \ 1004 $(distcleancheck_listfiles) ; \ 1005 exit 1; } >&2 1006check-am: all-am 1007check: check-recursive 1008all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) 1009install-binPROGRAMS: install-libLTLIBRARIES 1010 1011installdirs: installdirs-recursive 1012installdirs-am: 1013 for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \ 1014 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 1015 done 1016install: install-recursive 1017install-exec: install-exec-recursive 1018install-data: install-data-recursive 1019uninstall: uninstall-recursive 1020 1021install-am: all-am 1022 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 1023 1024installcheck: installcheck-recursive 1025install-strip: 1026 if test -z '$(STRIP)'; then \ 1027 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 1028 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 1029 install; \ 1030 else \ 1031 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 1032 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 1033 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 1034 fi 1035mostlyclean-generic: 1036 1037clean-generic: 1038 1039distclean-generic: 1040 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 1041 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 1042 -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) 1043 1044maintainer-clean-generic: 1045 @echo "This command is intended for maintainers to use" 1046 @echo "it deletes files that may require special tools to rebuild." 1047clean: clean-recursive 1048 1049clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ 1050 clean-libtool mostlyclean-am 1051 1052distclean: distclean-recursive 1053 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 1054 -rm -rf ./$(DEPDIR) 1055 -rm -f Makefile 1056distclean-am: clean-am distclean-compile distclean-generic \ 1057 distclean-libtool distclean-tags 1058 1059dvi: dvi-recursive 1060 1061dvi-am: 1062 1063html: html-recursive 1064 1065html-am: 1066 1067info: info-recursive 1068 1069info-am: 1070 1071install-data-am: install-includeHEADERS install-man 1072 1073install-dvi: install-dvi-recursive 1074 1075install-dvi-am: 1076 1077install-exec-am: install-binPROGRAMS install-libLTLIBRARIES 1078 1079install-html: install-html-recursive 1080 1081install-html-am: 1082 1083install-info: install-info-recursive 1084 1085install-info-am: 1086 1087install-man: install-man1 1088 1089install-pdf: install-pdf-recursive 1090 1091install-pdf-am: 1092 1093install-ps: install-ps-recursive 1094 1095install-ps-am: 1096 1097installcheck-am: 1098 1099maintainer-clean: maintainer-clean-recursive 1100 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 1101 -rm -rf $(top_srcdir)/autom4te.cache 1102 -rm -rf ./$(DEPDIR) 1103 -rm -f Makefile 1104maintainer-clean-am: distclean-am maintainer-clean-generic 1105 1106mostlyclean: mostlyclean-recursive 1107 1108mostlyclean-am: mostlyclean-compile mostlyclean-generic \ 1109 mostlyclean-libtool 1110 1111pdf: pdf-recursive 1112 1113pdf-am: 1114 1115ps: ps-recursive 1116 1117ps-am: 1118 1119uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ 1120 uninstall-libLTLIBRARIES uninstall-man 1121 1122uninstall-man: uninstall-man1 1123 1124.MAKE: $(am__recursive_targets) install-am install-strip 1125 1126.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 1127 am--refresh check check-am clean clean-binPROGRAMS \ 1128 clean-cscope clean-generic clean-libLTLIBRARIES clean-libtool \ 1129 cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ 1130 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ 1131 distcheck distclean distclean-compile distclean-generic \ 1132 distclean-libtool distclean-tags distcleancheck distdir \ 1133 distuninstallcheck dvi dvi-am html html-am info info-am \ 1134 install install-am install-binPROGRAMS install-data \ 1135 install-data-am install-dvi install-dvi-am install-exec \ 1136 install-exec-am install-html install-html-am \ 1137 install-includeHEADERS install-info install-info-am \ 1138 install-libLTLIBRARIES install-man install-man1 install-pdf \ 1139 install-pdf-am install-ps install-ps-am install-strip \ 1140 installcheck installcheck-am installdirs installdirs-am \ 1141 maintainer-clean maintainer-clean-generic mostlyclean \ 1142 mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ 1143 pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \ 1144 uninstall-binPROGRAMS uninstall-includeHEADERS \ 1145 uninstall-libLTLIBRARIES uninstall-man uninstall-man1 1146 1147.1.txt.1: 1148 $(A2X) --format=manpage -a revdate="Version $(VERSION)" $< 1149 1150# Maintainer rules 1151 1152indent: 1153 indent *.c *.h tests/*.c 1154 indent *.c *.h tests/*.c 1155 1156ChangeLog: 1157 cd $(srcdir) && git2cl > ChangeLog 1158 1159release: 1160 @if test -z "$(KEYID)"; then \ 1161 echo "Try this instead:"; \ 1162 echo " make release KEYID=[PGPKEYID]"; \ 1163 echo "For example:"; \ 1164 echo " make release KEYID=2117364A"; \ 1165 exit 1; \ 1166 fi 1167 @if test ! -d "$(YUBICO_WWW_REPO)"; then \ 1168 echo "yubico www repo not found!"; \ 1169 echo "Make sure that YUBICO_WWW_REPO is set"; \ 1170 exit 1; \ 1171 fi 1172 @head -3 $(srcdir)/NEWS | grep -q "Version $(VERSION) .released `date -I`" || \ 1173 (echo 'error: You need to update date/version in $(srcdir)/NEWS'; exit 1) 1174 rm -f $(srcdir)/ChangeLog 1175 make ChangeLog distcheck 1176 gpg --detach-sign --default-key $(KEYID) $(PACKAGE)-$(VERSION).tar.gz 1177 gpg --verify $(PACKAGE)-$(VERSION).tar.gz.sig 1178 cd $(srcdir) && git push 1179 cd $(srcdir) && git tag -u $(KEYID) -m $(VERSION) $(PACKAGE)-$(VERSION) 1180 cd $(srcdir) && git push --tags 1181 $(YUBICO_WWW_REPO)/save-mans $(PROJECT) $(MANSOURCES) 1182 $(YUBICO_WWW_REPO)/publish $(PROJECT) $(VERSION) $(PACKAGE)-$(VERSION).tar.gz* 1183 1184# Tell versions [3.59,3.63) of GNU make to not export all variables. 1185# Otherwise a system limit (for SysV at least) may be exceeded. 1186.NOEXPORT: 1187