1 /** 2 ****************************************************************************** 3 * @file stm32l1xx_hal_conf.h 4 * @author MCD Application Team 5 * @version V1.2.0 6 * @date 01-July-2016 7 * @brief HAL configuration file. 8 ****************************************************************************** 9 * @attention 10 * 11 * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> 12 * 13 * Redistribution and use in source and binary forms, with or without modification, 14 * are permitted provided that the following conditions are met: 15 * 1. Redistributions of source code must retain the above copyright notice, 16 * this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright notice, 18 * this list of conditions and the following disclaimer in the documentation 19 * and/or other materials provided with the distribution. 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 34 * 35 ****************************************************************************** 36 */ 37 38 /* Define to prevent recursive inclusion -------------------------------------*/ 39 #ifndef __STM32L1xx_HAL_CONF_H 40 #define __STM32L1xx_HAL_CONF_H 41 42 #ifdef __cplusplus 43 extern "C" { 44 #endif 45 46 /* Exported types ------------------------------------------------------------*/ 47 /* Exported constants --------------------------------------------------------*/ 48 49 /* ########################## Module Selection ############################## */ 50 /** 51 * @brief This is the list of modules to be used in the HAL driver 52 */ 53 #define HAL_MODULE_ENABLED 54 #define HAL_ADC_MODULE_ENABLED 55 #define HAL_COMP_MODULE_ENABLED 56 #define HAL_CORTEX_MODULE_ENABLED 57 #define HAL_CRC_MODULE_ENABLED 58 #define HAL_CRYP_MODULE_ENABLED 59 #define HAL_DAC_MODULE_ENABLED 60 #define HAL_DMA_MODULE_ENABLED 61 #define HAL_FLASH_MODULE_ENABLED 62 #define HAL_GPIO_MODULE_ENABLED 63 #define HAL_I2C_MODULE_ENABLED 64 #define HAL_I2S_MODULE_ENABLED 65 #define HAL_IRDA_MODULE_ENABLED 66 #define HAL_IWDG_MODULE_ENABLED 67 #define HAL_LCD_MODULE_ENABLED 68 #define HAL_NOR_MODULE_ENABLED 69 #define HAL_OPAMP_MODULE_ENABLED 70 #define HAL_PCD_MODULE_ENABLED 71 #define HAL_PWR_MODULE_ENABLED 72 #define HAL_RCC_MODULE_ENABLED 73 #define HAL_RTC_MODULE_ENABLED 74 #define HAL_SD_MODULE_ENABLED 75 #define HAL_SMARTCARD_MODULE_ENABLED 76 #define HAL_SPI_MODULE_ENABLED 77 #define HAL_SRAM_MODULE_ENABLED 78 #define HAL_TIM_MODULE_ENABLED 79 #define HAL_UART_MODULE_ENABLED 80 #define HAL_USART_MODULE_ENABLED 81 #define HAL_WWDG_MODULE_ENABLED 82 83 /* ########################## Oscillator Values adaptation ####################*/ 84 /** 85 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 86 * This value is used by the RCC HAL module to compute the system frequency 87 * (when HSE is used as system clock source, directly or through the PLL). 88 */ 89 #if !defined (HSE_VALUE) 90 #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ 91 #endif /* HSE_VALUE */ 92 93 #if !defined (HSE_STARTUP_TIMEOUT) 94 #define HSE_STARTUP_TIMEOUT ((uint32_t)200) /*!< Time out for HSE start up, in ms */ 95 #endif /* HSE_STARTUP_TIMEOUT */ 96 97 /** 98 * @brief Internal Multiple Speed oscillator (MSI) default value. 99 * This value is the default MSI range value after Reset. 100 */ 101 #if !defined (MSI_VALUE) 102 #define MSI_VALUE ((uint32_t)2097000) /*!< Value of the Internal oscillator in Hz*/ 103 #endif /* MSI_VALUE */ 104 /** 105 * @brief Internal High Speed oscillator (HSI) value. 106 * This value is used by the RCC HAL module to compute the system frequency 107 * (when HSI is used as system clock source, directly or through the PLL). 108 */ 109 #if !defined (HSI_VALUE) 110 #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ 111 #endif /* HSI_VALUE */ 112 113 /** 114 * @brief External Low Speed oscillator (LSE) value. 115 * This value is used by the UART, RTC HAL module to compute the system frequency 116 */ 117 #if !defined (LSE_VALUE) 118 #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ 119 #endif /* LSE_VALUE */ 120 121 122 #if !defined (LSE_STARTUP_TIMEOUT) 123 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ 124 #endif /* HSE_STARTUP_TIMEOUT */ 125 126 127 /* Tip: To avoid modifying this file each time you need to use different HSE, 128 === you can define the HSE value in your toolchain compiler preprocessor. */ 129 130 /* ########################### System Configuration ######################### */ 131 /** 132 * @brief This is the HAL system configuration section 133 */ 134 #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ 135 #define TICK_INT_PRIORITY ((uint32_t)0x000F) /*!< tick interrupt priority */ 136 #define USE_RTOS 0 137 #define PREFETCH_ENABLE 1 138 #define INSTRUCTION_CACHE_ENABLE 0 139 #define DATA_CACHE_ENABLE 0 140 141 /* ########################## Assert Selection ############################## */ 142 /** 143 * @brief Uncomment the line below to expanse the "assert_param" macro in the 144 * HAL drivers code 145 */ 146 /*#define USE_FULL_ASSERT 1*/ 147 148 /* Includes ------------------------------------------------------------------*/ 149 /** 150 * @brief Include module's header file 151 */ 152 153 #ifdef HAL_RCC_MODULE_ENABLED 154 #include "stm32l1xx_hal_rcc.h" 155 #endif /* HAL_RCC_MODULE_ENABLED */ 156 157 #ifdef HAL_GPIO_MODULE_ENABLED 158 #include "stm32l1xx_hal_gpio.h" 159 #endif /* HAL_GPIO_MODULE_ENABLED */ 160 161 #ifdef HAL_DMA_MODULE_ENABLED 162 #include "stm32l1xx_hal_dma.h" 163 #endif /* HAL_DMA_MODULE_ENABLED */ 164 165 #ifdef HAL_CORTEX_MODULE_ENABLED 166 #include "stm32l1xx_hal_cortex.h" 167 #endif /* HAL_CORTEX_MODULE_ENABLED */ 168 169 #ifdef HAL_ADC_MODULE_ENABLED 170 #include "stm32l1xx_hal_adc.h" 171 #endif /* HAL_ADC_MODULE_ENABLED */ 172 173 #ifdef HAL_COMP_MODULE_ENABLED 174 #include "stm32l1xx_hal_comp.h" 175 #endif /* HAL_COMP_MODULE_ENABLED */ 176 177 #ifdef HAL_CRC_MODULE_ENABLED 178 #include "stm32l1xx_hal_crc.h" 179 #endif /* HAL_CRC_MODULE_ENABLED */ 180 181 #ifdef HAL_CRYP_MODULE_ENABLED 182 #include "stm32l1xx_hal_cryp.h" 183 #endif /* HAL_CRYP_MODULE_ENABLED */ 184 185 #ifdef HAL_DAC_MODULE_ENABLED 186 #include "stm32l1xx_hal_dac.h" 187 #endif /* HAL_DAC_MODULE_ENABLED */ 188 189 #ifdef HAL_FLASH_MODULE_ENABLED 190 #include "stm32l1xx_hal_flash.h" 191 #endif /* HAL_FLASH_MODULE_ENABLED */ 192 193 #ifdef HAL_SRAM_MODULE_ENABLED 194 #include "stm32l1xx_hal_sram.h" 195 #endif /* HAL_SRAM_MODULE_ENABLED */ 196 197 #ifdef HAL_NOR_MODULE_ENABLED 198 #include "stm32l1xx_hal_nor.h" 199 #endif /* HAL_NOR_MODULE_ENABLED */ 200 201 #ifdef HAL_I2C_MODULE_ENABLED 202 #include "stm32l1xx_hal_i2c.h" 203 #endif /* HAL_I2C_MODULE_ENABLED */ 204 205 #ifdef HAL_I2S_MODULE_ENABLED 206 #include "stm32l1xx_hal_i2s.h" 207 #endif /* HAL_I2S_MODULE_ENABLED */ 208 209 #ifdef HAL_IWDG_MODULE_ENABLED 210 #include "stm32l1xx_hal_iwdg.h" 211 #endif /* HAL_IWDG_MODULE_ENABLED */ 212 213 #ifdef HAL_LCD_MODULE_ENABLED 214 #include "stm32l1xx_hal_lcd.h" 215 #endif /* HAL_LCD_MODULE_ENABLED */ 216 217 #ifdef HAL_OPAMP_MODULE_ENABLED 218 #include "stm32l1xx_hal_opamp.h" 219 #endif /* HAL_OPAMP_MODULE_ENABLED */ 220 221 #ifdef HAL_PWR_MODULE_ENABLED 222 #include "stm32l1xx_hal_pwr.h" 223 #endif /* HAL_PWR_MODULE_ENABLED */ 224 225 #ifdef HAL_RTC_MODULE_ENABLED 226 #include "stm32l1xx_hal_rtc.h" 227 #endif /* HAL_RTC_MODULE_ENABLED */ 228 229 #ifdef HAL_SD_MODULE_ENABLED 230 #include "stm32l1xx_hal_sd.h" 231 #endif /* HAL_SD_MODULE_ENABLED */ 232 233 #ifdef HAL_SPI_MODULE_ENABLED 234 #include "stm32l1xx_hal_spi.h" 235 #endif /* HAL_SPI_MODULE_ENABLED */ 236 237 #ifdef HAL_TIM_MODULE_ENABLED 238 #include "stm32l1xx_hal_tim.h" 239 #endif /* HAL_TIM_MODULE_ENABLED */ 240 241 #ifdef HAL_UART_MODULE_ENABLED 242 #include "stm32l1xx_hal_uart.h" 243 #endif /* HAL_UART_MODULE_ENABLED */ 244 245 #ifdef HAL_USART_MODULE_ENABLED 246 #include "stm32l1xx_hal_usart.h" 247 #endif /* HAL_USART_MODULE_ENABLED */ 248 249 #ifdef HAL_IRDA_MODULE_ENABLED 250 #include "stm32l1xx_hal_irda.h" 251 #endif /* HAL_IRDA_MODULE_ENABLED */ 252 253 #ifdef HAL_SMARTCARD_MODULE_ENABLED 254 #include "stm32l1xx_hal_smartcard.h" 255 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 256 257 #ifdef HAL_WWDG_MODULE_ENABLED 258 #include "stm32l1xx_hal_wwdg.h" 259 #endif /* HAL_WWDG_MODULE_ENABLED */ 260 261 #ifdef HAL_PCD_MODULE_ENABLED 262 #include "stm32l1xx_hal_pcd.h" 263 #endif /* HAL_PCD_MODULE_ENABLED */ 264 265 /* Exported macro ------------------------------------------------------------*/ 266 #ifdef USE_FULL_ASSERT 267 /** 268 * @brief The assert_param macro is used for function's parameters check. 269 * @param expr: If expr is false, it calls assert_failed function 270 * which reports the name of the source file and the source 271 * line number of the call that failed. 272 * If expr is true, it returns no value. 273 * @retval None 274 */ 275 #include "mbed_assert.h" 276 #define assert_param(expr) MBED_ASSERT(expr) 277 #else 278 #define assert_param(expr) ((void)0U) 279 #endif /* USE_FULL_ASSERT */ 280 281 #ifdef __cplusplus 282 } 283 #endif 284 285 #endif /* __STM32L1xx_HAL_CONF_H */ 286 287 288 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 289