1if ARCH_MX6 2 3config MX6_SMP 4 bool 5 select ARM_ERRATA_751472 6 select ARM_ERRATA_761320 7 select ARM_ERRATA_794072 8 select ARM_ERRATA_845369 9 select MP 10 11config MX6 12 bool 13 default y 14 select ARM_ERRATA_743622 if !MX6UL && !MX6ULL 15 select GPT_TIMER if !MX6UL && !MX6ULL 16 imply CMD_FUSE 17 18choice 19 prompt "i.MX6 SoC select" 20 21config MX6D 22 bool "i.MX 6Dual SoC support" 23 select HAS_CAAM 24 select MX6_SMP 25 26config MX6DL 27 bool "i.MX 6DualLite SoC support" 28 select HAS_CAAM 29 select MX6_SMP 30 31config MX6Q 32 bool "i.MX 6Quad SoC support" 33 select HAS_CAAM 34 select MX6_SMP 35 36config MX6QDL 37 bool "i.MX 6Dual and 6Quad SoC support" 38 select HAS_CAAM 39 select MX6_SMP 40 41config MX6S 42 bool "i.MX 6Solo SoC support" 43 select HAS_CAAM 44 45config MX6SL 46 bool "i.MX 6SoloLite SoC support" 47 48config MX6SX 49 bool "i.MX 6SoloX SoC support" 50 select HAS_CAAM 51 select ROM_UNIFIED_SECTIONS 52 53config MX6SLL 54 bool "i.MX 6SLL SoC support" 55 select ROM_UNIFIED_SECTIONS 56 57config MX6UL 58 bool "i.MX 6UltraLite SoC support" 59 select HAS_CAAM 60 select ROM_UNIFIED_SECTIONS 61 select SYSCOUNTER_TIMER 62 select SYS_L2CACHE_OFF 63 64config MX6ULL 65 bool "i.MX 6ULL SoC support" 66 select ROM_UNIFIED_SECTIONS 67 select SYSCOUNTER_TIMER 68 select SYS_L2CACHE_OFF 69 70endchoice 71 72config MX6UL_LITESOM 73 bool 74 select DM 75 select DM_THERMAL 76 select SUPPORT_SPL 77 imply CMD_DM 78 79config MX6UL_OPOS6UL 80 bool 81 select BOARD_LATE_INIT 82 select DM 83 select DM_GPIO 84 select DM_MMC 85 select DM_THERMAL 86 select SPL_DM if SPL 87 select SPL_OF_CONTROL if SPL 88 select SPL_PINCTRL if SPL 89 select SPL_SEPARATE_BSS if SPL 90 select SUPPORT_SPL 91 imply CMD_DM 92 93config MX6_OCRAM_256KB 94 bool "Support 256KB OCRAM" 95 depends on MX6D || MX6Q 96 help 97 Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series 98 of chips, such as for SPL. The OCRAM of the Lite series of chips is 99 only 128KB, so using this option will prevent the resulting code from 100 working on those chips. 101 102config MX6_DDRCAL 103 bool "Include dynamic DDR calibration routines" 104 depends on SPL 105 default n 106 help 107 Say "Y" if your board uses dynamic (per-boot) DDR calibration. 108 If unsure, say N. 109 110choice 111 prompt "MX6 board select" 112 optional 113 114config TARGET_APALIS_IMX6 115 bool "Toradex Apalis iMX6 board" 116 depends on MX6Q 117 select BOARD_LATE_INIT 118 select DM 119 select DM_SERIAL 120 select DM_THERMAL 121 select SUPPORT_SPL 122 imply CMD_DM 123 imply CMD_SATA 124 125config TARGET_ARISTAINETOS2C 126 bool "Support aristainetos2-revC" 127 depends on MX6DL 128 select BOARD_LATE_INIT 129 select SYS_I2C_MXC 130 select MXC_UART 131 select FEC_MXC 132 select DM 133 imply CMD_SATA 134 imply CMD_DM 135 136config TARGET_ARISTAINETOS2CCSLB 137 bool "Support aristainetos2-revC CSL" 138 depends on MX6DL 139 select BOARD_LATE_INIT 140 select SYS_I2C_MXC 141 select MXC_UART 142 select FEC_MXC 143 select DM 144 imply CMD_SATA 145 imply CMD_DM 146 147config TARGET_CM_FX6 148 bool "CM-FX6" 149 depends on MX6QDL 150 select BOARD_LATE_INIT 151 select DM 152 select DM_GPIO 153 select DM_SERIAL 154 select SUPPORT_SPL 155 imply CMD_DM 156 157config TARGET_COLIBRI_IMX6 158 bool "Toradex Colibri iMX6 board" 159 select BOARD_LATE_INIT 160 select DM 161 select DM_SERIAL 162 select DM_THERMAL 163 select SUPPORT_SPL 164 imply CMD_DM 165 166config TARGET_COLIBRI_IMX6ULL 167 bool "Toradex Colibri iMX6ULL" 168 depends on MX6ULL 169 select BOARD_LATE_INIT 170 select DM 171 select DM_THERMAL 172 173config TARGET_DART_6UL 174 bool "Variscite imx6ULL dart(DART-SOM-6ULL)" 175 depends on MX6ULL 176 select DM 177 select DM_ETH 178 select DM_GPIO 179 select DM_I2C 180 select DM_MMC 181 select DM_SERIAL 182 select DM_THERMAL 183 select SUPPORT_SPL 184 185config TARGET_DHCOMIMX6 186 bool "dh_imx6" 187 depends on MX6QDL 188 select BOARD_EARLY_INIT_F 189 select BOARD_LATE_INIT 190 select DM 191 select DM_THERMAL 192 select SUPPORT_SPL 193 imply CMD_DM 194 imply CMD_SPL 195 196config TARGET_DISPLAY5 197 bool "LWN DISPLAY5 board" 198 depends on MX6Q 199 select DM 200 select DM_ETH 201 select DM_I2C 202 select DM_MMC 203 select DM_SPI 204 select DM_GPIO 205 select DM_SERIAL 206 select SUPPORT_SPL 207 imply CMD_DM 208 209config TARGET_EMBESTMX6BOARDS 210 bool "embestmx6boards" 211 select BOARD_LATE_INIT 212 select SUPPORT_SPL 213 214config TARGET_GE_BX50V3 215 bool "General Electric Bx50v3" 216 depends on MX6Q 217 select BOARD_LATE_INIT 218 219config TARGET_GE_B1X5V2 220 bool "General Electric B1x5v2" 221 depends on MX6QDL 222 select BOARD_LATE_INIT 223 select DM 224 select DM_THERMAL 225 select SUPPORT_SPL 226 227config TARGET_GW_VENTANA 228 bool "gw_ventana" 229 depends on MX6QDL 230 select SUPPORT_SPL 231 imply CMD_SATA 232 imply CMD_SPL 233 234config TARGET_KOSAGI_NOVENA 235 bool "Kosagi Novena" 236 select BOARD_LATE_INIT 237 select DM_ETH 238 select DM_GPIO 239 select DM_MMC 240 select DM_PCI 241 select DM_SCSI 242 select DM_USB 243 select DM_VIDEO 244 select OF_CONTROL 245 select SUPPORT_SPL 246 imply CMD_DM 247 248config TARGET_MCCMON6 249 bool "mccmon6" 250 depends on MX6QDL 251 select SUPPORT_SPL 252 select DM 253 select DM_GPIO 254 select DM_ETH 255 select DM_SERIAL 256 select DM_I2C 257 select DM_SPI 258 imply CMD_DM 259 260config TARGET_MX6CUBOXI 261 bool "Solid-run mx6 boards" 262 depends on MX6QDL 263 select BOARD_LATE_INIT 264 select SUPPORT_SPL 265 266config TARGET_MX6LOGICPD 267 bool "Logic PD i.MX6 SOM" 268 depends on MX6Q 269 select SUPPORT_SPL 270 select BOARD_EARLY_INIT_F 271 select BOARD_LATE_INIT 272 select DM 273 select DM_ETH 274 select DM_GPIO 275 select DM_I2C 276 select DM_MMC 277 select DM_PMIC 278 select OF_CONTROL 279 imply CMD_DM 280 281config TARGET_MX6MEMCAL 282 bool "mx6memcal" 283 depends on MX6QDL 284 select SUPPORT_SPL 285 help 286 The mx6memcal board is a virtual board that can be used to validate 287 and characterize the memory layout of a new design during the initial 288 development and pre-production stages. 289 290config TARGET_MX6DL_MAMOJ 291 bool "Support BTicino Mamoj" 292 depends on MX6QDL 293 select DM 294 select DM_ETH 295 select DM_GPIO 296 select DM_I2C 297 select DM_MMC 298 select DM_PMIC 299 select DM_PMIC_PFUZE100 300 select DM_THERMAL 301 select OF_CONTROL 302 select PINCTRL 303 select SPL 304 select SPL_DM if SPL 305 select SPL_GPIO_SUPPORT if SPL 306 select SPL_LIBCOMMON_SUPPORT if SPL 307 select SPL_LIBDISK_SUPPORT if SPL 308 select SPL_LIBGENERIC_SUPPORT if SPL 309 select SPL_MMC_SUPPORT if SPL 310 select SPL_OF_CONTROL if SPL 311 select SPL_OF_LIBFDT if SPL 312 select SPL_PINCTRL if SPL 313 select SPL_SEPARATE_BSS if SPL 314 select SPL_SERIAL_SUPPORT if SPL 315 select SPL_USB_GADGET if SPL 316 select SPL_USB_HOST_SUPPORT if SPL 317 select SPL_USB_SDP_SUPPORT if SPL 318 select SPL_WATCHDOG_SUPPORT if SPL 319 select SUPPORT_SPL 320 imply CMD_DM 321 322config TARGET_MX6Q_ENGICAM 323 bool "Support Engicam i.Core(RQS)" 324 depends on MX6QDL 325 select BOARD_LATE_INIT 326 select DM 327 select DM_ETH 328 select DM_GPIO 329 select DM_I2C 330 select DM_MMC 331 select DM_THERMAL 332 select OF_CONTROL 333 select SPL_DM if SPL 334 select SPL_OF_CONTROL if SPL 335 select SPL_OF_LIBFDT 336 select SPL_PINCTRL if SPL 337 select SPL_SEPARATE_BSS if SPL 338 select SUPPORT_SPL 339 imply CMD_DM 340 341config TARGET_MX6SABREAUTO 342 bool "mx6sabreauto" 343 depends on MX6QDL 344 select BOARD_EARLY_INIT_F 345 select BOARD_LATE_INIT 346 select DM 347 select DM_THERMAL 348 select SUPPORT_SPL 349 imply CMD_DM 350 351config TARGET_MX6SABRESD 352 bool "mx6sabresd" 353 depends on MX6QDL 354 select BOARD_EARLY_INIT_F 355 select BOARD_LATE_INIT 356 select DM 357 select DM_THERMAL 358 select SUPPORT_SPL 359 imply CMD_DM 360 361config TARGET_MX6SLEVK 362 bool "mx6slevk" 363 depends on MX6SL 364 select SUPPORT_SPL 365 366config TARGET_MX6SLLEVK 367 bool "mx6sll evk" 368 depends on MX6SLL 369 select BOARD_LATE_INIT 370 select DM 371 select DM_THERMAL 372 imply CMD_DM 373 374config TARGET_MX6SXSABRESD 375 bool "mx6sxsabresd" 376 depends on MX6SX 377 select BOARD_EARLY_INIT_F 378 select BOARD_LATE_INIT 379 select DM 380 select DM_THERMAL 381 select SUPPORT_SPL 382 383config TARGET_MX6SXSABREAUTO 384 bool "mx6sxsabreauto" 385 depends on MX6SX 386 select BOARD_EARLY_INIT_F 387 select BOARD_LATE_INIT 388 select DM 389 select DM_THERMAL 390 imply CMD_DM 391 392config TARGET_MX6UL_9X9_EVK 393 bool "mx6ul_9x9_evk" 394 depends on MX6UL 395 select BOARD_LATE_INIT 396 select DM 397 select DM_THERMAL 398 select SUPPORT_SPL 399 imply CMD_DM 400 401config TARGET_MX6UL_14X14_EVK 402 bool "mx6ul_14x14_evk" 403 depends on MX6UL 404 select BOARD_LATE_INIT 405 select DM 406 select DM_THERMAL 407 select SUPPORT_SPL 408 imply CMD_DM 409 410config TARGET_MX6UL_ENGICAM 411 bool "Support Engicam GEAM6UL/Is.IoT" 412 depends on MX6UL 413 select BOARD_LATE_INIT 414 select DM 415 select DM_ETH 416 select DM_GPIO 417 select DM_I2C 418 select DM_MMC 419 select DM_THERMAL 420 select OF_CONTROL 421 select SPL_DM if SPL 422 select SPL_OF_CONTROL if SPL 423 select SPL_PINCTRL if SPL 424 select SPL_SEPARATE_BSS if SPL 425 select SUPPORT_SPL 426 imply CMD_DM 427 428config TARGET_MX6ULL_14X14_EVK 429 bool "Support mx6ull_14x14_evk" 430 depends on MX6ULL 431 select BOARD_LATE_INIT 432 select DM 433 select DM_THERMAL 434 imply CMD_DM 435 436config TARGET_MYS_6ULX 437 bool "MYiR MYS-6ULX" 438 depends on MX6ULL 439 select DM 440 select DM_ETH 441 select DM_GPIO 442 select DM_I2C 443 select DM_MMC 444 select DM_SERIAL 445 select DM_THERMAL 446 select SUPPORT_SPL 447 448config TARGET_NITROGEN6X 449 bool "nitrogen6x" 450 depends on MX6DL || MX6Q || MX6QDL || MX6S 451 imply USB_ETHER_ASIX 452 imply USB_ETHER_MCS7830 453 imply USB_ETHER_SMSC95XX 454 imply USB_HOST_ETHER 455 456config TARGET_NPI_IMX6ULL 457 bool "Seeed NPI-IMX6ULL" 458 depends on MX6ULL 459 select DM 460 select DM_ETH 461 select DM_MMC 462 select DM_GPIO 463 select DM_SERIAL 464 select DM_THERMAL 465 select SUPPORT_SPL 466 467config TARGET_OPOS6ULDEV 468 bool "Armadeus OPOS6ULDev board" 469 depends on MX6UL 470 select MX6UL_OPOS6UL 471 472config TARGET_PICO_IMX6 473 bool "PICO-IMX6" 474 depends on MX6QDL 475 select BOARD_EARLY_INIT_F 476 select BOARD_LATE_INIT 477 select DM 478 select DM_THERMAL 479 select SUPPORT_SPL 480 imply CMD_DM 481 482config TARGET_PICO_IMX6UL 483 bool "PICO-IMX6UL-EMMC" 484 depends on MX6UL 485 select DM 486 select SUPPORT_SPL 487 imply CMD_DM 488 489config TARGET_LITEBOARD 490 bool "Grinn liteBoard (i.MX6UL)" 491 depends on MX6UL 492 select BOARD_LATE_INIT 493 select MX6UL_LITESOM 494 495config TARGET_PCM058 496 bool "Phytec PCM058 i.MX6 Quad" 497 depends on MX6Q 498 select BOARD_LATE_INIT 499 select SUPPORT_SPL 500 select DM 501 select OF_CONTROL 502 imply CMD_DM 503 504config TARGET_PCL063 505 bool "PHYTEC PCL063 (phyCORE-i.MX6UL)" 506 depends on MX6UL 507 select DM 508 select DM_ETH 509 select DM_GPIO 510 select DM_I2C 511 select DM_MMC 512 select DM_SERIAL 513 select DM_THERMAL 514 select SUPPORT_SPL 515 516config TARGET_PCL063_ULL 517 bool "PHYTEC PCL063 (phyCORE-i.MX6ULL)" 518 depends on MX6ULL 519 select DM 520 select DM_ETH 521 select DM_GPIO 522 select DM_I2C 523 select DM_MMC 524 select DM_SERIAL 525 select DM_THERMAL 526 select SUPPORT_SPL 527 528config TARGET_SOMLABS_VISIONSOM_6ULL 529 bool "visionsom-6ull" 530 depends on MX6ULL 531 select BOARD_LATE_INIT 532 select DM 533 select DM_ETH 534 select DM_GPIO 535 select DM_MMC 536 select DM_SERIAL 537 select DM_THERMAL 538 imply CMD_DM 539 540config TARGET_TBS2910 541 bool "TBS2910 Matrix ARM mini PC" 542 depends on MX6Q 543 544config TARGET_KP_IMX6Q_TPC 545 bool "K+P KP_IMX6Q_TPC i.MX6 Quad" 546 depends on MX6QDL 547 select BOARD_EARLY_INIT_F 548 select BOARD_LATE_INIT 549 select DM 550 select SPL_DM if SPL 551 select DM_THERMAL 552 select DM_MMC 553 select DM_ETH 554 select DM_REGULATOR 555 select SPL_DM_REGULATOR if SPL 556 select DM_SERIAL 557 select DM_I2C 558 select DM_GPIO 559 select DM_USB 560 select SUPPORT_SPL 561 select SPL_SEPARATE_BSS if SPL 562 imply CMD_DM 563 imply CMD_SPL 564 565config TARGET_TQMA6 566 bool "TQ Systems TQMa6 board" 567 select BOARD_EARLY_INIT_F 568 select BOARD_LATE_INIT 569 select MXC_SPI 570 select SPI 571 imply DM 572 imply DM_GPIO 573 imply DM_MMC 574 imply DM_SPI 575 imply DM_SPI_FLASH 576 imply DM_I2C 577 imply CMD_SF 578 imply CMD_DM 579 580config TARGET_UDOO 581 bool "udoo" 582 depends on MX6QDL 583 select BOARD_LATE_INIT 584 select SUPPORT_SPL 585 586config TARGET_UDOO_NEO 587 bool "UDOO Neo" 588 depends on MX6SX 589 select BOARD_LATE_INIT 590 select DM 591 select DM_THERMAL 592 select SUPPORT_SPL 593 imply CMD_DM 594 595config TARGET_SOFTING_VINING_2000 596 bool "Softing VIN|ING 2000" 597 depends on MX6SX 598 select BOARD_LATE_INIT 599 select DM 600 select DM_THERMAL 601 select SUPPORT_SPL 602 imply CMD_DM 603 604config TARGET_WANDBOARD 605 bool "wandboard" 606 depends on MX6QDL 607 select BOARD_LATE_INIT 608 select SUPPORT_SPL 609 610config TARGET_WARP 611 bool "WaRP" 612 depends on MX6SL 613 select BOARD_LATE_INIT 614 615config TARGET_BRPPT2 616 bool "brppt2" 617 depends on MX6QDL 618 select BOARD_LATE_INIT 619 select OF_CONTROL 620 select SPL_OF_LIBFDT 621 select DM 622 select DM_ETH 623 select DM_GPIO 624 select DM_I2C 625 select DM_MMC 626 select SUPPORT_SPL 627 select SPL_DM if SPL 628 select SPL_OF_CONTROL if SPL 629 help 630 Support 631 B&R BRPPT2 platform 632 based on Freescale's iMX6 SoC 633 634config TARGET_O4_IMX6ULL_NANO 635 bool "O4-iMX6ULL-NANO" 636 depends on MX6ULL 637 select BOARD_LATE_INIT 638 select DM 639 select DM_THERMAL 640 imply CMD_DM 641 help 642 Support for www.out4.ru O4-iMX6UL-NANO platform 643 based on Freescale's i.MX6UL/i.MX6ULL SoC. 644 645endchoice 646 647config SYS_SOC 648 default "mx6" 649 650source "board/ge/bx50v3/Kconfig" 651source "board/ge/b1x5v2/Kconfig" 652source "board/aristainetos/Kconfig" 653source "board/armadeus/opos6uldev/Kconfig" 654source "board/boundary/nitrogen6x/Kconfig" 655source "board/bticino/mamoj/Kconfig" 656source "board/compulab/cm_fx6/Kconfig" 657source "board/dhelectronics/dh_imx6/Kconfig" 658source "board/embest/mx6boards/Kconfig" 659source "board/engicam/imx6q/Kconfig" 660source "board/engicam/imx6ul/Kconfig" 661source "board/freescale/mx6memcal/Kconfig" 662source "board/freescale/mx6sabreauto/Kconfig" 663source "board/freescale/mx6sabresd/Kconfig" 664source "board/freescale/mx6slevk/Kconfig" 665source "board/freescale/mx6sllevk/Kconfig" 666source "board/freescale/mx6sxsabresd/Kconfig" 667source "board/freescale/mx6sxsabreauto/Kconfig" 668source "board/freescale/mx6ul_14x14_evk/Kconfig" 669source "board/freescale/mx6ullevk/Kconfig" 670source "board/grinn/liteboard/Kconfig" 671source "board/phytec/pcm058/Kconfig" 672source "board/phytec/pcl063/Kconfig" 673source "board/gateworks/gw_ventana/Kconfig" 674source "board/kosagi/novena/Kconfig" 675source "board/softing/vining_2000/Kconfig" 676source "board/liebherr/display5/Kconfig" 677source "board/liebherr/mccmon6/Kconfig" 678source "board/logicpd/imx6/Kconfig" 679source "board/solidrun/mx6cuboxi/Kconfig" 680source "board/somlabs/visionsom-6ull/Kconfig" 681source "board/technexion/pico-imx6/Kconfig" 682source "board/technexion/pico-imx6ul/Kconfig" 683source "board/tbs/tbs2910/Kconfig" 684source "board/tqc/tqma6/Kconfig" 685source "board/toradex/apalis_imx6/Kconfig" 686source "board/toradex/colibri_imx6/Kconfig" 687source "board/toradex/colibri-imx6ull/Kconfig" 688source "board/k+p/kp_imx6q_tpc/Kconfig" 689source "board/udoo/Kconfig" 690source "board/udoo/neo/Kconfig" 691source "board/wandboard/Kconfig" 692source "board/warp/Kconfig" 693source "board/BuR/brppt2/Kconfig" 694source "board/out4/o4-imx6ull-nano/Kconfig" 695 696endif 697