1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the Porter board 4 * 5 * Copyright (C) 2015 Cogent Embedded, Inc. 6 */ 7 8/* 9 * SSI-AK4642 10 * 11 * JP3: 2-1: AK4642 12 * 2-3: ADV7511 13 * 14 * This command is required before playback/capture: 15 * 16 * amixer set "LINEOUT Mixer DACL" on 17 */ 18 19/dts-v1/; 20#include "r8a7791.dtsi" 21#include <dt-bindings/gpio/gpio.h> 22 23/ { 24 model = "Porter"; 25 compatible = "renesas,porter", "renesas,r8a7791"; 26 27 aliases { 28 serial0 = &scif0; 29 i2c9 = &gpioi2c2; 30 i2c10 = &i2chdmi; 31 }; 32 33 chosen { 34 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; 35 stdout-path = "serial0:115200n8"; 36 }; 37 38 memory@40000000 { 39 device_type = "memory"; 40 reg = <0 0x40000000 0 0x40000000>; 41 }; 42 43 memory@200000000 { 44 device_type = "memory"; 45 reg = <2 0x00000000 0 0x40000000>; 46 }; 47 48 vcc_sdhi0: regulator-vcc-sdhi0 { 49 compatible = "regulator-fixed"; 50 51 regulator-name = "SDHI0 Vcc"; 52 regulator-min-microvolt = <3300000>; 53 regulator-max-microvolt = <3300000>; 54 regulator-always-on; 55 }; 56 57 vccq_sdhi0: regulator-vccq-sdhi0 { 58 compatible = "regulator-gpio"; 59 60 regulator-name = "SDHI0 VccQ"; 61 regulator-min-microvolt = <1800000>; 62 regulator-max-microvolt = <3300000>; 63 64 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; 65 gpios-states = <1>; 66 states = <3300000 1>, <1800000 0>; 67 }; 68 69 vcc_sdhi2: regulator-vcc-sdhi2 { 70 compatible = "regulator-fixed"; 71 72 regulator-name = "SDHI2 Vcc"; 73 regulator-min-microvolt = <3300000>; 74 regulator-max-microvolt = <3300000>; 75 regulator-always-on; 76 }; 77 78 vccq_sdhi2: regulator-vccq-sdhi2 { 79 compatible = "regulator-gpio"; 80 81 regulator-name = "SDHI2 VccQ"; 82 regulator-min-microvolt = <1800000>; 83 regulator-max-microvolt = <3300000>; 84 85 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; 86 gpios-states = <1>; 87 states = <3300000 1>, <1800000 0>; 88 }; 89 90 hdmi-out { 91 compatible = "hdmi-connector"; 92 type = "a"; 93 94 port { 95 hdmi_con: endpoint { 96 remote-endpoint = <&adv7511_out>; 97 }; 98 }; 99 }; 100 101 x3_clk: x3-clock { 102 compatible = "fixed-clock"; 103 #clock-cells = <0>; 104 clock-frequency = <148500000>; 105 }; 106 107 x16_clk: x16-clock { 108 compatible = "fixed-clock"; 109 #clock-cells = <0>; 110 clock-frequency = <74250000>; 111 }; 112 113 x14_clk: audio_clock { 114 compatible = "fixed-clock"; 115 #clock-cells = <0>; 116 clock-frequency = <11289600>; 117 }; 118 119 sound { 120 compatible = "simple-audio-card"; 121 122 simple-audio-card,format = "left_j"; 123 simple-audio-card,bitclock-master = <&soundcodec>; 124 simple-audio-card,frame-master = <&soundcodec>; 125 126 simple-audio-card,cpu { 127 sound-dai = <&rcar_sound>; 128 }; 129 130 soundcodec: simple-audio-card,codec { 131 sound-dai = <&ak4642>; 132 clocks = <&x14_clk>; 133 }; 134 }; 135 136 gpioi2c2: i2c-9 { 137 #address-cells = <1>; 138 #size-cells = <0>; 139 compatible = "i2c-gpio"; 140 status = "disabled"; 141 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 142 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 143 i2c-gpio,delay-us = <5>; 144 }; 145 146 /* 147 * A fallback to GPIO is provided for I2C2. 148 */ 149 i2chdmi: i2c-10 { 150 compatible = "i2c-demux-pinctrl"; 151 i2c-parent = <&i2c2>, <&gpioi2c2>; 152 i2c-bus-name = "i2c-hdmi"; 153 #address-cells = <1>; 154 #size-cells = <0>; 155 156 ak4642: codec@12 { 157 compatible = "asahi-kasei,ak4642"; 158 #sound-dai-cells = <0>; 159 reg = <0x12>; 160 }; 161 162 composite-in@20 { 163 compatible = "adi,adv7180"; 164 reg = <0x20>; 165 remote = <&vin0>; 166 167 port { 168 adv7180: endpoint { 169 bus-width = <8>; 170 remote-endpoint = <&vin0ep>; 171 }; 172 }; 173 }; 174 175 hdmi@39 { 176 compatible = "adi,adv7511w"; 177 reg = <0x39>; 178 interrupt-parent = <&gpio3>; 179 interrupts = <29 IRQ_TYPE_LEVEL_LOW>; 180 181 adi,input-depth = <8>; 182 adi,input-colorspace = "rgb"; 183 adi,input-clock = "1x"; 184 adi,input-style = <1>; 185 adi,input-justification = "evenly"; 186 187 ports { 188 #address-cells = <1>; 189 #size-cells = <0>; 190 191 port@0 { 192 reg = <0>; 193 adv7511_in: endpoint { 194 remote-endpoint = <&du_out_rgb>; 195 }; 196 }; 197 198 port@1 { 199 reg = <1>; 200 adv7511_out: endpoint { 201 remote-endpoint = <&hdmi_con>; 202 }; 203 }; 204 }; 205 }; 206 }; 207}; 208 209&extal_clk { 210 clock-frequency = <20000000>; 211}; 212 213&pfc { 214 scif0_pins: scif0 { 215 groups = "scif0_data_d"; 216 function = "scif0"; 217 }; 218 219 ether_pins: ether { 220 groups = "eth_link", "eth_mdio", "eth_rmii"; 221 function = "eth"; 222 }; 223 224 phy1_pins: phy1 { 225 groups = "intc_irq0"; 226 function = "intc"; 227 }; 228 229 pmic_irq_pins: pmicirq { 230 groups = "intc_irq2"; 231 function = "intc"; 232 }; 233 234 sdhi0_pins: sd0 { 235 groups = "sdhi0_data4", "sdhi0_ctrl"; 236 function = "sdhi0"; 237 }; 238 239 sdhi2_pins: sd2 { 240 groups = "sdhi2_data4", "sdhi2_ctrl"; 241 function = "sdhi2"; 242 }; 243 244 qspi_pins: qspi { 245 groups = "qspi_ctrl", "qspi_data4"; 246 function = "qspi"; 247 }; 248 249 i2c2_pins: i2c2 { 250 groups = "i2c2"; 251 function = "i2c2"; 252 }; 253 254 usb0_pins: usb0 { 255 groups = "usb0"; 256 function = "usb0"; 257 }; 258 259 usb1_pins: usb1 { 260 groups = "usb1"; 261 function = "usb1"; 262 }; 263 264 vin0_pins: vin0 { 265 groups = "vin0_data8", "vin0_clk"; 266 function = "vin0"; 267 }; 268 269 can0_pins: can0 { 270 groups = "can0_data"; 271 function = "can0"; 272 }; 273 274 du_pins: du { 275 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; 276 function = "du"; 277 }; 278 279 ssi_pins: sound { 280 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; 281 function = "ssi"; 282 }; 283 284 audio_clk_pins: audio_clk { 285 groups = "audio_clk_a"; 286 function = "audio_clk"; 287 }; 288}; 289 290&scif0 { 291 pinctrl-0 = <&scif0_pins>; 292 pinctrl-names = "default"; 293 294 status = "okay"; 295}; 296 297ðer { 298 pinctrl-0 = <ðer_pins &phy1_pins>; 299 pinctrl-names = "default"; 300 301 phy-handle = <&phy1>; 302 renesas,ether-link-active-low; 303 status = "okay"; 304 305 phy1: ethernet-phy@1 { 306 reg = <1>; 307 interrupt-parent = <&irqc0>; 308 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 309 micrel,led-mode = <1>; 310 }; 311}; 312 313&sdhi0 { 314 pinctrl-0 = <&sdhi0_pins>; 315 pinctrl-names = "default"; 316 317 vmmc-supply = <&vcc_sdhi0>; 318 vqmmc-supply = <&vccq_sdhi0>; 319 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; 320 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; 321 status = "okay"; 322}; 323 324&sdhi2 { 325 pinctrl-0 = <&sdhi2_pins>; 326 pinctrl-names = "default"; 327 328 vmmc-supply = <&vcc_sdhi2>; 329 vqmmc-supply = <&vccq_sdhi2>; 330 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; 331 status = "okay"; 332}; 333 334&qspi { 335 pinctrl-0 = <&qspi_pins>; 336 pinctrl-names = "default"; 337 338 status = "okay"; 339 340 flash@0 { 341 compatible = "spansion,s25fl512s", "jedec,spi-nor"; 342 reg = <0>; 343 spi-max-frequency = <30000000>; 344 spi-tx-bus-width = <4>; 345 spi-rx-bus-width = <4>; 346 m25p,fast-read; 347 348 partitions { 349 compatible = "fixed-partitions"; 350 #address-cells = <1>; 351 #size-cells = <1>; 352 353 partition@0 { 354 label = "loader_prg"; 355 reg = <0x00000000 0x00040000>; 356 read-only; 357 }; 358 partition@40000 { 359 label = "user_prg"; 360 reg = <0x00040000 0x00400000>; 361 read-only; 362 }; 363 partition@440000 { 364 label = "flash_fs"; 365 reg = <0x00440000 0x03bc0000>; 366 }; 367 }; 368 }; 369}; 370 371&i2c2 { 372 pinctrl-0 = <&i2c2_pins>; 373 pinctrl-names = "i2c-hdmi"; 374 375 clock-frequency = <400000>; 376}; 377 378&i2c6 { 379 pinctrl-names = "default"; 380 pinctrl-0 = <&pmic_irq_pins>; 381 status = "okay"; 382 clock-frequency = <100000>; 383 384 pmic@5a { 385 compatible = "dlg,da9063l"; 386 reg = <0x5a>; 387 interrupt-parent = <&irqc0>; 388 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 389 interrupt-controller; 390 391 wdt { 392 compatible = "dlg,da9063-watchdog"; 393 }; 394 }; 395 396 vdd_dvfs: regulator@68 { 397 compatible = "dlg,da9210"; 398 reg = <0x68>; 399 interrupt-parent = <&irqc0>; 400 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 401 402 regulator-min-microvolt = <1000000>; 403 regulator-max-microvolt = <1000000>; 404 regulator-boot-on; 405 regulator-always-on; 406 }; 407}; 408 409&sata0 { 410 status = "okay"; 411}; 412 413&cpu0 { 414 cpu0-supply = <&vdd_dvfs>; 415}; 416 417/* composite video input */ 418&vin0 { 419 status = "okay"; 420 pinctrl-0 = <&vin0_pins>; 421 pinctrl-names = "default"; 422 423 port { 424 vin0ep: endpoint { 425 remote-endpoint = <&adv7180>; 426 bus-width = <8>; 427 }; 428 }; 429}; 430 431&pci0 { 432 pinctrl-0 = <&usb0_pins>; 433 pinctrl-names = "default"; 434 435 status = "okay"; 436}; 437 438&pci1 { 439 pinctrl-0 = <&usb1_pins>; 440 pinctrl-names = "default"; 441 442 status = "okay"; 443}; 444 445&hsusb { 446 pinctrl-0 = <&usb0_pins>; 447 pinctrl-names = "default"; 448 449 status = "okay"; 450}; 451 452&usbphy { 453 status = "okay"; 454}; 455 456&pcie_bus_clk { 457 clock-frequency = <100000000>; 458}; 459 460&pciec { 461 status = "okay"; 462}; 463 464&can0 { 465 pinctrl-0 = <&can0_pins>; 466 pinctrl-names = "default"; 467 468 status = "okay"; 469}; 470 471&du { 472 pinctrl-0 = <&du_pins>; 473 pinctrl-names = "default"; 474 status = "okay"; 475 476 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, 477 <&x3_clk>, <&x16_clk>; 478 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; 479 480 ports { 481 port@0 { 482 endpoint { 483 remote-endpoint = <&adv7511_in>; 484 }; 485 }; 486 }; 487}; 488 489&lvds0 { 490 ports { 491 port@1 { 492 lvds_connector: endpoint { 493 }; 494 }; 495 }; 496}; 497 498&rcar_sound { 499 pinctrl-0 = <&ssi_pins &audio_clk_pins>; 500 pinctrl-names = "default"; 501 status = "okay"; 502 503 /* Single DAI */ 504 #sound-dai-cells = <0>; 505 506 rcar_sound,dai { 507 dai0 { 508 playback = <&ssi0>; 509 capture = <&ssi1>; 510 }; 511 }; 512}; 513 514&rwdt { 515 timeout-sec = <60>; 516 status = "okay"; 517}; 518 519&ssi1 { 520 shared-pin; 521}; 522