1/* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun4i-a10.dtsi" 45#include "sunxi-common-regulators.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47 48/ { 49 model = "MK802"; 50 compatible = "allwinner,mk802", "allwinner,sun4i-a10"; 51 52 aliases { 53 serial0 = &uart0; 54 }; 55 56 chosen { 57 stdout-path = "serial0:115200n8"; 58 }; 59 60 hdmi-connector { 61 compatible = "hdmi-connector"; 62 type = "a"; 63 64 port { 65 hdmi_con_in: endpoint { 66 remote-endpoint = <&hdmi_out_con>; 67 }; 68 }; 69 }; 70}; 71 72&codec { 73 status = "okay"; 74}; 75 76&de { 77 status = "okay"; 78}; 79 80&ehci0 { 81 status = "okay"; 82}; 83 84&ehci1 { 85 status = "okay"; 86}; 87 88&hdmi { 89 status = "okay"; 90}; 91 92&hdmi_out { 93 hdmi_out_con: endpoint { 94 remote-endpoint = <&hdmi_con_in>; 95 }; 96}; 97 98&mmc0 { 99 vmmc-supply = <®_vcc3v3>; 100 bus-width = <4>; 101 cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ 102 status = "okay"; 103}; 104 105&ohci0 { 106 status = "okay"; 107}; 108 109&otg_sram { 110 status = "okay"; 111}; 112 113®_usb0_vbus { 114 status = "okay"; 115}; 116 117®_usb1_vbus { 118 status = "okay"; 119}; 120 121®_usb2_vbus { 122 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ 123 status = "okay"; 124}; 125 126&uart0 { 127 pinctrl-names = "default"; 128 pinctrl-0 = <&uart0_pb_pins>; 129 status = "okay"; 130}; 131 132&usb_otg { 133 dr_mode = "otg"; 134 status = "okay"; 135}; 136 137&usbphy { 138 usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ 139 usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ 140 usb0_vbus-supply = <®_usb0_vbus>; 141 usb1_vbus-supply = <®_usb1_vbus>; 142 usb2_vbus-supply = <®_usb2_vbus>; 143 status = "okay"; 144}; 145