1/*
2 * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43#include "sun8i-h3-nanopi.dtsi"
44
45/ {
46	model = "FriendlyArm NanoPi M1 Plus";
47	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
48
49	aliases {
50		serial1 = &uart3;
51		ethernet0 = &emac;
52		ethernet1 = &sdio_wifi;
53	};
54
55	reg_gmac_3v3: gmac-3v3 {
56		compatible = "regulator-fixed";
57		regulator-name = "gmac-3v3";
58		regulator-min-microvolt = <3300000>;
59		regulator-max-microvolt = <3300000>;
60		startup-delay-us = <100000>;
61		enable-active-high;
62		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
63	};
64
65	wifi_pwrseq: wifi_pwrseq {
66		compatible = "mmc-pwrseq-simple";
67		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
68	};
69
70	connector {
71		compatible = "hdmi-connector";
72		type = "a";
73
74		port {
75			hdmi_con_in: endpoint {
76				remote-endpoint = <&hdmi_out_con>;
77			};
78		};
79	};
80};
81
82&de {
83	status = "okay";
84};
85
86&ehci1 {
87	status = "okay";
88};
89
90&ehci2 {
91	status = "okay";
92};
93
94&emac {
95	pinctrl-names = "default";
96	pinctrl-0 = <&emac_rgmii_pins>;
97	phy-supply = <&reg_gmac_3v3>;
98	phy-handle = <&ext_rgmii_phy>;
99	phy-mode = "rgmii";
100
101	status = "okay";
102};
103
104&external_mdio {
105	ext_rgmii_phy: ethernet-phy@1 {
106		compatible = "ethernet-phy-ieee802.3-c22";
107		reg = <7>;
108	};
109};
110
111&hdmi {
112	status = "okay";
113};
114
115&hdmi_out {
116	hdmi_out_con: endpoint {
117		remote-endpoint = <&hdmi_con_in>;
118	};
119};
120
121&ir {
122	pinctrl-names = "default";
123	pinctrl-0 = <&r_ir_rx_pin>;
124	status = "okay";
125};
126
127&mmc1 {
128	vmmc-supply = <&reg_vcc3v3>;
129	vqmmc-supply = <&reg_vcc3v3>;
130	mmc-pwrseq = <&wifi_pwrseq>;
131	bus-width = <4>;
132	non-removable;
133	status = "okay";
134
135	sdio_wifi: sdio_wifi@1 {
136		reg = <1>;
137		compatible = "brcm,bcm4329-fmac";
138		interrupt-parent = <&pio>;
139		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
140		interrupt-names = "host-wake";
141	};
142};
143
144&mmc2 {
145	pinctrl-names = "default";
146	pinctrl-0 = <&mmc2_8bit_pins>;
147	vmmc-supply = <&reg_vcc3v3>;
148	vqmmc-supply = <&reg_vcc3v3>;
149	bus-width = <8>;
150	non-removable;
151	status = "okay";
152};
153
154&ohci1 {
155	status = "okay";
156};
157
158&ohci2 {
159	status = "okay";
160};
161
162&uart3 {
163	pinctrl-names = "default";
164	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
165	status = "okay";
166};
167