1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier PXs3 SoC
4//
5// Copyright (C) 2017 Socionext Inc.
6//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/gpio/uniphier-gpio.h>
10#include <dt-bindings/thermal/thermal.h>
11
12/ {
13	compatible = "socionext,uniphier-pxs3";
14	#address-cells = <2>;
15	#size-cells = <2>;
16	interrupt-parent = <&gic>;
17
18	cpus {
19		#address-cells = <2>;
20		#size-cells = <0>;
21
22		cpu-map {
23			cluster0 {
24				core0 {
25					cpu = <&cpu0>;
26				};
27				core1 {
28					cpu = <&cpu1>;
29				};
30				core2 {
31					cpu = <&cpu2>;
32				};
33				core3 {
34					cpu = <&cpu3>;
35				};
36			};
37		};
38
39		cpu0: cpu@0 {
40			device_type = "cpu";
41			compatible = "arm,cortex-a53";
42			reg = <0 0x000>;
43			clocks = <&sys_clk 33>;
44			enable-method = "psci";
45			operating-points-v2 = <&cluster0_opp>;
46			#cooling-cells = <2>;
47		};
48
49		cpu1: cpu@1 {
50			device_type = "cpu";
51			compatible = "arm,cortex-a53";
52			reg = <0 0x001>;
53			clocks = <&sys_clk 33>;
54			enable-method = "psci";
55			operating-points-v2 = <&cluster0_opp>;
56			#cooling-cells = <2>;
57		};
58
59		cpu2: cpu@2 {
60			device_type = "cpu";
61			compatible = "arm,cortex-a53";
62			reg = <0 0x002>;
63			clocks = <&sys_clk 33>;
64			enable-method = "psci";
65			operating-points-v2 = <&cluster0_opp>;
66			#cooling-cells = <2>;
67		};
68
69		cpu3: cpu@3 {
70			device_type = "cpu";
71			compatible = "arm,cortex-a53";
72			reg = <0 0x003>;
73			clocks = <&sys_clk 33>;
74			enable-method = "psci";
75			operating-points-v2 = <&cluster0_opp>;
76			#cooling-cells = <2>;
77		};
78	};
79
80	cluster0_opp: opp-table {
81		compatible = "operating-points-v2";
82		opp-shared;
83
84		opp-250000000 {
85			opp-hz = /bits/ 64 <250000000>;
86			clock-latency-ns = <300>;
87		};
88		opp-325000000 {
89			opp-hz = /bits/ 64 <325000000>;
90			clock-latency-ns = <300>;
91		};
92		opp-500000000 {
93			opp-hz = /bits/ 64 <500000000>;
94			clock-latency-ns = <300>;
95		};
96		opp-650000000 {
97			opp-hz = /bits/ 64 <650000000>;
98			clock-latency-ns = <300>;
99		};
100		opp-666667000 {
101			opp-hz = /bits/ 64 <666667000>;
102			clock-latency-ns = <300>;
103		};
104		opp-866667000 {
105			opp-hz = /bits/ 64 <866667000>;
106			clock-latency-ns = <300>;
107		};
108		opp-1000000000 {
109			opp-hz = /bits/ 64 <1000000000>;
110			clock-latency-ns = <300>;
111		};
112		opp-1300000000 {
113			opp-hz = /bits/ 64 <1300000000>;
114			clock-latency-ns = <300>;
115		};
116	};
117
118	psci {
119		compatible = "arm,psci-1.0";
120		method = "smc";
121	};
122
123	clocks {
124		refclk: ref {
125			compatible = "fixed-clock";
126			#clock-cells = <0>;
127			clock-frequency = <25000000>;
128		};
129	};
130
131	emmc_pwrseq: emmc-pwrseq {
132		compatible = "mmc-pwrseq-emmc";
133		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>;
134	};
135
136	timer {
137		compatible = "arm,armv8-timer";
138		interrupts = <1 13 4>,
139			     <1 14 4>,
140			     <1 11 4>,
141			     <1 10 4>;
142	};
143
144	thermal-zones {
145		cpu-thermal {
146			polling-delay-passive = <250>;	/* 250ms */
147			polling-delay = <1000>;		/* 1000ms */
148			thermal-sensors = <&pvtctl>;
149
150			trips {
151				cpu_crit: cpu-crit {
152					temperature = <110000>;	/* 110C */
153					hysteresis = <2000>;
154					type = "critical";
155				};
156				cpu_alert: cpu-alert {
157					temperature = <100000>;	/* 100C */
158					hysteresis = <2000>;
159					type = "passive";
160				};
161			};
162
163			cooling-maps {
164				map0 {
165					trip = <&cpu_alert>;
166					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
167							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
168							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
169							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
170				};
171			};
172		};
173	};
174
175	reserved-memory {
176		#address-cells = <2>;
177		#size-cells = <2>;
178		ranges;
179
180		secure-memory@81000000 {
181			reg = <0x0 0x81000000 0x0 0x01000000>;
182			no-map;
183		};
184	};
185
186	soc@0 {
187		compatible = "simple-bus";
188		#address-cells = <1>;
189		#size-cells = <1>;
190		ranges = <0 0 0 0xffffffff>;
191
192		spi0: spi@54006000 {
193			compatible = "socionext,uniphier-scssi";
194			status = "disabled";
195			reg = <0x54006000 0x100>;
196			#address-cells = <1>;
197			#size-cells = <0>;
198			interrupts = <0 39 4>;
199			pinctrl-names = "default";
200			pinctrl-0 = <&pinctrl_spi0>;
201			clocks = <&peri_clk 11>;
202			resets = <&peri_rst 11>;
203		};
204
205		spi1: spi@54006100 {
206			compatible = "socionext,uniphier-scssi";
207			status = "disabled";
208			reg = <0x54006100 0x100>;
209			#address-cells = <1>;
210			#size-cells = <0>;
211			interrupts = <0 216 4>;
212			pinctrl-names = "default";
213			pinctrl-0 = <&pinctrl_spi1>;
214			clocks = <&peri_clk 12>;
215			resets = <&peri_rst 12>;
216		};
217
218		serial0: serial@54006800 {
219			compatible = "socionext,uniphier-uart";
220			status = "disabled";
221			reg = <0x54006800 0x40>;
222			interrupts = <0 33 4>;
223			pinctrl-names = "default";
224			pinctrl-0 = <&pinctrl_uart0>;
225			clocks = <&peri_clk 0>;
226			resets = <&peri_rst 0>;
227		};
228
229		serial1: serial@54006900 {
230			compatible = "socionext,uniphier-uart";
231			status = "disabled";
232			reg = <0x54006900 0x40>;
233			interrupts = <0 35 4>;
234			pinctrl-names = "default";
235			pinctrl-0 = <&pinctrl_uart1>;
236			clocks = <&peri_clk 1>;
237			resets = <&peri_rst 1>;
238		};
239
240		serial2: serial@54006a00 {
241			compatible = "socionext,uniphier-uart";
242			status = "disabled";
243			reg = <0x54006a00 0x40>;
244			interrupts = <0 37 4>;
245			pinctrl-names = "default";
246			pinctrl-0 = <&pinctrl_uart2>;
247			clocks = <&peri_clk 2>;
248			resets = <&peri_rst 2>;
249		};
250
251		serial3: serial@54006b00 {
252			compatible = "socionext,uniphier-uart";
253			status = "disabled";
254			reg = <0x54006b00 0x40>;
255			interrupts = <0 177 4>;
256			pinctrl-names = "default";
257			pinctrl-0 = <&pinctrl_uart3>;
258			clocks = <&peri_clk 3>;
259			resets = <&peri_rst 3>;
260		};
261
262		gpio: gpio@55000000 {
263			compatible = "socionext,uniphier-gpio";
264			reg = <0x55000000 0x200>;
265			interrupt-parent = <&aidet>;
266			interrupt-controller;
267			#interrupt-cells = <2>;
268			gpio-controller;
269			#gpio-cells = <2>;
270			gpio-ranges = <&pinctrl 0 0 0>,
271				      <&pinctrl 104 0 0>,
272				      <&pinctrl 168 0 0>;
273			gpio-ranges-group-names = "gpio_range0",
274						  "gpio_range1",
275						  "gpio_range2";
276			ngpios = <286>;
277			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
278						     <21 217 3>;
279		};
280
281		i2c0: i2c@58780000 {
282			compatible = "socionext,uniphier-fi2c";
283			status = "disabled";
284			reg = <0x58780000 0x80>;
285			#address-cells = <1>;
286			#size-cells = <0>;
287			interrupts = <0 41 4>;
288			pinctrl-names = "default";
289			pinctrl-0 = <&pinctrl_i2c0>;
290			clocks = <&peri_clk 4>;
291			resets = <&peri_rst 4>;
292			clock-frequency = <100000>;
293		};
294
295		i2c1: i2c@58781000 {
296			compatible = "socionext,uniphier-fi2c";
297			status = "disabled";
298			reg = <0x58781000 0x80>;
299			#address-cells = <1>;
300			#size-cells = <0>;
301			interrupts = <0 42 4>;
302			pinctrl-names = "default";
303			pinctrl-0 = <&pinctrl_i2c1>;
304			clocks = <&peri_clk 5>;
305			resets = <&peri_rst 5>;
306			clock-frequency = <100000>;
307		};
308
309		i2c2: i2c@58782000 {
310			compatible = "socionext,uniphier-fi2c";
311			status = "disabled";
312			reg = <0x58782000 0x80>;
313			#address-cells = <1>;
314			#size-cells = <0>;
315			interrupts = <0 43 4>;
316			pinctrl-names = "default";
317			pinctrl-0 = <&pinctrl_i2c2>;
318			clocks = <&peri_clk 6>;
319			resets = <&peri_rst 6>;
320			clock-frequency = <100000>;
321		};
322
323		i2c3: i2c@58783000 {
324			compatible = "socionext,uniphier-fi2c";
325			status = "disabled";
326			reg = <0x58783000 0x80>;
327			#address-cells = <1>;
328			#size-cells = <0>;
329			interrupts = <0 44 4>;
330			pinctrl-names = "default";
331			pinctrl-0 = <&pinctrl_i2c3>;
332			clocks = <&peri_clk 7>;
333			resets = <&peri_rst 7>;
334			clock-frequency = <100000>;
335		};
336
337		/* chip-internal connection for HDMI */
338		i2c6: i2c@58786000 {
339			compatible = "socionext,uniphier-fi2c";
340			reg = <0x58786000 0x80>;
341			#address-cells = <1>;
342			#size-cells = <0>;
343			interrupts = <0 26 4>;
344			clocks = <&peri_clk 10>;
345			resets = <&peri_rst 10>;
346			clock-frequency = <400000>;
347		};
348
349		system_bus: system-bus@58c00000 {
350			compatible = "socionext,uniphier-system-bus";
351			status = "disabled";
352			reg = <0x58c00000 0x400>;
353			#address-cells = <2>;
354			#size-cells = <1>;
355			pinctrl-names = "default";
356			pinctrl-0 = <&pinctrl_system_bus>;
357		};
358
359		smpctrl@59801000 {
360			compatible = "socionext,uniphier-smpctrl";
361			reg = <0x59801000 0x400>;
362		};
363
364		sdctrl@59810000 {
365			compatible = "socionext,uniphier-pxs3-sdctrl",
366				     "simple-mfd", "syscon";
367			reg = <0x59810000 0x400>;
368
369			sd_clk: clock {
370				compatible = "socionext,uniphier-pxs3-sd-clock";
371				#clock-cells = <1>;
372			};
373
374			sd_rst: reset {
375				compatible = "socionext,uniphier-pxs3-sd-reset";
376				#reset-cells = <1>;
377			};
378		};
379
380		perictrl@59820000 {
381			compatible = "socionext,uniphier-pxs3-perictrl",
382				     "simple-mfd", "syscon";
383			reg = <0x59820000 0x200>;
384
385			peri_clk: clock {
386				compatible = "socionext,uniphier-pxs3-peri-clock";
387				#clock-cells = <1>;
388			};
389
390			peri_rst: reset {
391				compatible = "socionext,uniphier-pxs3-peri-reset";
392				#reset-cells = <1>;
393			};
394		};
395
396		emmc: mmc@5a000000 {
397			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
398			reg = <0x5a000000 0x400>;
399			interrupts = <0 78 4>;
400			pinctrl-names = "default";
401			pinctrl-0 = <&pinctrl_emmc>;
402			clocks = <&sys_clk 4>;
403			resets = <&sys_rst 4>;
404			bus-width = <8>;
405			mmc-ddr-1_8v;
406			mmc-hs200-1_8v;
407			mmc-pwrseq = <&emmc_pwrseq>;
408			cdns,phy-input-delay-legacy = <9>;
409			cdns,phy-input-delay-mmc-highspeed = <2>;
410			cdns,phy-input-delay-mmc-ddr = <3>;
411			cdns,phy-dll-delay-sdclk = <21>;
412			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
413		};
414
415		sd: mmc@5a400000 {
416			compatible = "socionext,uniphier-sd-v3.1.1";
417			status = "disabled";
418			reg = <0x5a400000 0x800>;
419			interrupts = <0 76 4>;
420			pinctrl-names = "default", "uhs";
421			pinctrl-0 = <&pinctrl_sd>;
422			pinctrl-1 = <&pinctrl_sd_uhs>;
423			clocks = <&sd_clk 0>;
424			reset-names = "host";
425			resets = <&sd_rst 0>;
426			bus-width = <4>;
427			cap-sd-highspeed;
428			sd-uhs-sdr12;
429			sd-uhs-sdr25;
430			sd-uhs-sdr50;
431		};
432
433		soc_glue: soc-glue@5f800000 {
434			compatible = "socionext,uniphier-pxs3-soc-glue",
435				     "simple-mfd", "syscon";
436			reg = <0x5f800000 0x2000>;
437
438			pinctrl: pinctrl {
439				compatible = "socionext,uniphier-pxs3-pinctrl";
440			};
441		};
442
443		soc-glue@5f900000 {
444			compatible = "socionext,uniphier-pxs3-soc-glue-debug",
445				     "simple-mfd";
446			#address-cells = <1>;
447			#size-cells = <1>;
448			ranges = <0 0x5f900000 0x2000>;
449
450			efuse@100 {
451				compatible = "socionext,uniphier-efuse";
452				reg = <0x100 0x28>;
453			};
454
455			efuse@200 {
456				compatible = "socionext,uniphier-efuse";
457				reg = <0x200 0x68>;
458				#address-cells = <1>;
459				#size-cells = <1>;
460
461				/* USB cells */
462				usb_rterm0: trim@54,4 {
463					reg = <0x54 1>;
464					bits = <4 2>;
465				};
466				usb_rterm1: trim@55,4 {
467					reg = <0x55 1>;
468					bits = <4 2>;
469				};
470				usb_rterm2: trim@58,4 {
471					reg = <0x58 1>;
472					bits = <4 2>;
473				};
474				usb_rterm3: trim@59,4 {
475					reg = <0x59 1>;
476					bits = <4 2>;
477				};
478				usb_sel_t0: trim@54,0 {
479					reg = <0x54 1>;
480					bits = <0 4>;
481				};
482				usb_sel_t1: trim@55,0 {
483					reg = <0x55 1>;
484					bits = <0 4>;
485				};
486				usb_sel_t2: trim@58,0 {
487					reg = <0x58 1>;
488					bits = <0 4>;
489				};
490				usb_sel_t3: trim@59,0 {
491					reg = <0x59 1>;
492					bits = <0 4>;
493				};
494				usb_hs_i0: trim@56,0 {
495					reg = <0x56 1>;
496					bits = <0 4>;
497				};
498				usb_hs_i2: trim@5a,0 {
499					reg = <0x5a 1>;
500					bits = <0 4>;
501				};
502			};
503		};
504
505		xdmac: dma-controller@5fc10000 {
506			compatible = "socionext,uniphier-xdmac";
507			reg = <0x5fc10000 0x5300>;
508			interrupts = <0 188 4>;
509			dma-channels = <16>;
510			#dma-cells = <2>;
511		};
512
513		aidet: interrupt-controller@5fc20000 {
514			compatible = "socionext,uniphier-pxs3-aidet";
515			reg = <0x5fc20000 0x200>;
516			interrupt-controller;
517			#interrupt-cells = <2>;
518		};
519
520		gic: interrupt-controller@5fe00000 {
521			compatible = "arm,gic-v3";
522			reg = <0x5fe00000 0x10000>,	/* GICD */
523			      <0x5fe80000 0x80000>;	/* GICR */
524			interrupt-controller;
525			#interrupt-cells = <3>;
526			interrupts = <1 9 4>;
527		};
528
529		sysctrl@61840000 {
530			compatible = "socionext,uniphier-pxs3-sysctrl",
531				     "simple-mfd", "syscon";
532			reg = <0x61840000 0x10000>;
533
534			sys_clk: clock {
535				compatible = "socionext,uniphier-pxs3-clock";
536				#clock-cells = <1>;
537			};
538
539			sys_rst: reset {
540				compatible = "socionext,uniphier-pxs3-reset";
541				#reset-cells = <1>;
542			};
543
544			watchdog {
545				compatible = "socionext,uniphier-wdt";
546			};
547
548			pvtctl: pvtctl {
549				compatible = "socionext,uniphier-pxs3-thermal";
550				interrupts = <0 3 4>;
551				#thermal-sensor-cells = <0>;
552				socionext,tmod-calibration = <0x0f22 0x68ee>;
553			};
554		};
555
556		eth0: ethernet@65000000 {
557			compatible = "socionext,uniphier-pxs3-ave4";
558			status = "disabled";
559			reg = <0x65000000 0x8500>;
560			interrupts = <0 66 4>;
561			pinctrl-names = "default";
562			pinctrl-0 = <&pinctrl_ether_rgmii>;
563			clock-names = "ether";
564			clocks = <&sys_clk 6>;
565			reset-names = "ether";
566			resets = <&sys_rst 6>;
567			phy-mode = "rgmii";
568			local-mac-address = [00 00 00 00 00 00];
569			socionext,syscon-phy-mode = <&soc_glue 0>;
570
571			mdio0: mdio {
572				#address-cells = <1>;
573				#size-cells = <0>;
574			};
575		};
576
577		eth1: ethernet@65200000 {
578			compatible = "socionext,uniphier-pxs3-ave4";
579			status = "disabled";
580			reg = <0x65200000 0x8500>;
581			interrupts = <0 67 4>;
582			pinctrl-names = "default";
583			pinctrl-0 = <&pinctrl_ether1_rgmii>;
584			clock-names = "ether";
585			clocks = <&sys_clk 7>;
586			reset-names = "ether";
587			resets = <&sys_rst 7>;
588			phy-mode = "rgmii";
589			local-mac-address = [00 00 00 00 00 00];
590			socionext,syscon-phy-mode = <&soc_glue 1>;
591
592			mdio1: mdio {
593				#address-cells = <1>;
594				#size-cells = <0>;
595			};
596		};
597
598		_usb0: usb@65a00000 {
599			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
600			status = "disabled";
601			reg = <0x65a00000 0xcd00>;
602			interrupt-names = "host", "peripheral";
603			interrupts = <0 134 4>, <0 135 4>;
604			pinctrl-names = "default";
605			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
606			clock-names = "ref", "bus_early", "suspend";
607			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
608			resets = <&usb0_rst 15>;
609			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
610			       <&usb0_ssphy0>, <&usb0_ssphy1>;
611			dr_mode = "host";
612		};
613
614		usb-glue@65b00000 {
615			compatible = "socionext,uniphier-pxs3-dwc3-glue",
616				     "simple-mfd";
617			#address-cells = <1>;
618			#size-cells = <1>;
619			ranges = <0 0x65b00000 0x400>;
620
621			usb0_rst: reset@0 {
622				compatible = "socionext,uniphier-pxs3-usb3-reset";
623				reg = <0x0 0x4>;
624				#reset-cells = <1>;
625				clock-names = "link";
626				clocks = <&sys_clk 12>;
627				reset-names = "link";
628				resets = <&sys_rst 12>;
629			};
630
631			usb0_vbus0: regulator@100 {
632				compatible = "socionext,uniphier-pxs3-usb3-regulator";
633				reg = <0x100 0x10>;
634				clock-names = "link";
635				clocks = <&sys_clk 12>;
636				reset-names = "link";
637				resets = <&sys_rst 12>;
638			};
639
640			usb0_vbus1: regulator@110 {
641				compatible = "socionext,uniphier-pxs3-usb3-regulator";
642				reg = <0x110 0x10>;
643				clock-names = "link";
644				clocks = <&sys_clk 12>;
645				reset-names = "link";
646				resets = <&sys_rst 12>;
647			};
648
649			usb0_hsphy0: hs-phy@200 {
650				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
651				reg = <0x200 0x10>;
652				#phy-cells = <0>;
653				clock-names = "link", "phy";
654				clocks = <&sys_clk 12>, <&sys_clk 16>;
655				reset-names = "link", "phy";
656				resets = <&sys_rst 12>, <&sys_rst 16>;
657				vbus-supply = <&usb0_vbus0>;
658				nvmem-cell-names = "rterm", "sel_t", "hs_i";
659				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
660					      <&usb_hs_i0>;
661			};
662
663			usb0_hsphy1: hs-phy@210 {
664				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
665				reg = <0x210 0x10>;
666				#phy-cells = <0>;
667				clock-names = "link", "phy";
668				clocks = <&sys_clk 12>, <&sys_clk 16>;
669				reset-names = "link", "phy";
670				resets = <&sys_rst 12>, <&sys_rst 16>;
671				vbus-supply = <&usb0_vbus1>;
672				nvmem-cell-names = "rterm", "sel_t", "hs_i";
673				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
674					      <&usb_hs_i0>;
675			};
676
677			usb0_ssphy0: ss-phy@300 {
678				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
679				reg = <0x300 0x10>;
680				#phy-cells = <0>;
681				clock-names = "link", "phy";
682				clocks = <&sys_clk 12>, <&sys_clk 17>;
683				reset-names = "link", "phy";
684				resets = <&sys_rst 12>, <&sys_rst 17>;
685				vbus-supply = <&usb0_vbus0>;
686			};
687
688			usb0_ssphy1: ss-phy@310 {
689				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
690				reg = <0x310 0x10>;
691				#phy-cells = <0>;
692				clock-names = "link", "phy";
693				clocks = <&sys_clk 12>, <&sys_clk 18>;
694				reset-names = "link", "phy";
695				resets = <&sys_rst 12>, <&sys_rst 18>;
696				vbus-supply = <&usb0_vbus1>;
697			};
698		};
699
700		/* FIXME: U-Boot own node */
701		usb0: usb@65b00000 {
702			compatible = "socionext,uniphier-pxs3-dwc3";
703			status = "disabled";
704			reg = <0x65b00000 0x1000>;
705			#address-cells = <1>;
706			#size-cells = <1>;
707			ranges;
708			pinctrl-names = "default";
709			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
710			dwc3@65a00000 {
711				compatible = "snps,dwc3";
712				reg = <0x65a00000 0x10000>;
713				interrupts = <0 134 4>;
714				dr_mode = "host";
715				tx-fifo-resize;
716			};
717		};
718
719		_usb1: usb@65c00000 {
720			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
721			status = "disabled";
722			reg = <0x65c00000 0xcd00>;
723			interrupt-names = "host", "peripheral";
724			interrupts = <0 137 4>, <0 138 4>;
725			pinctrl-names = "default";
726			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
727			clock-names = "ref", "bus_early", "suspend";
728			clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
729			resets = <&usb1_rst 15>;
730			phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
731			       <&usb1_ssphy0>;
732			dr_mode = "host";
733		};
734
735		usb-glue@65d00000 {
736			compatible = "socionext,uniphier-pxs3-dwc3-glue",
737				     "simple-mfd";
738			#address-cells = <1>;
739			#size-cells = <1>;
740			ranges = <0 0x65d00000 0x400>;
741
742			usb1_rst: reset@0 {
743				compatible = "socionext,uniphier-pxs3-usb3-reset";
744				reg = <0x0 0x4>;
745				#reset-cells = <1>;
746				clock-names = "link";
747				clocks = <&sys_clk 13>;
748				reset-names = "link";
749				resets = <&sys_rst 13>;
750			};
751
752			usb1_vbus0: regulator@100 {
753				compatible = "socionext,uniphier-pxs3-usb3-regulator";
754				reg = <0x100 0x10>;
755				clock-names = "link";
756				clocks = <&sys_clk 13>;
757				reset-names = "link";
758				resets = <&sys_rst 13>;
759			};
760
761			usb1_vbus1: regulator@110 {
762				compatible = "socionext,uniphier-pxs3-usb3-regulator";
763				reg = <0x110 0x10>;
764				clock-names = "link";
765				clocks = <&sys_clk 13>;
766				reset-names = "link";
767				resets = <&sys_rst 13>;
768			};
769
770			usb1_hsphy0: hs-phy@200 {
771				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
772				reg = <0x200 0x10>;
773				#phy-cells = <0>;
774				clock-names = "link", "phy", "phy-ext";
775				clocks = <&sys_clk 13>, <&sys_clk 20>,
776					 <&sys_clk 14>;
777				reset-names = "link", "phy";
778				resets = <&sys_rst 13>, <&sys_rst 20>;
779				vbus-supply = <&usb1_vbus0>;
780				nvmem-cell-names = "rterm", "sel_t", "hs_i";
781				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
782					      <&usb_hs_i2>;
783			};
784
785			usb1_hsphy1: hs-phy@210 {
786				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
787				reg = <0x210 0x10>;
788				#phy-cells = <0>;
789				clock-names = "link", "phy", "phy-ext";
790				clocks = <&sys_clk 13>, <&sys_clk 20>,
791					 <&sys_clk 14>;
792				reset-names = "link", "phy";
793				resets = <&sys_rst 13>, <&sys_rst 20>;
794				vbus-supply = <&usb1_vbus1>;
795				nvmem-cell-names = "rterm", "sel_t", "hs_i";
796				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
797					      <&usb_hs_i2>;
798			};
799
800			usb1_ssphy0: ss-phy@300 {
801				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
802				reg = <0x300 0x10>;
803				#phy-cells = <0>;
804				clock-names = "link", "phy", "phy-ext";
805				clocks = <&sys_clk 13>, <&sys_clk 21>,
806					 <&sys_clk 14>;
807				reset-names = "link", "phy";
808				resets = <&sys_rst 13>, <&sys_rst 21>;
809				vbus-supply = <&usb1_vbus0>;
810			};
811		};
812
813		/* FIXME: U-Boot own node */
814		usb1: usb@65d00000 {
815			compatible = "socionext,uniphier-pxs3-dwc3";
816			status = "disabled";
817			reg = <0x65d00000 0x1000>;
818			#address-cells = <1>;
819			#size-cells = <1>;
820			ranges;
821			pinctrl-names = "default";
822			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
823			dwc3@65c00000 {
824				compatible = "snps,dwc3";
825				reg = <0x65c00000 0x10000>;
826				interrupts = <0 137 4>;
827				dr_mode = "host";
828				tx-fifo-resize;
829			};
830		};
831
832		pcie: pcie@66000000 {
833			compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
834			status = "disabled";
835			reg-names = "dbi", "link", "config";
836			reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
837			      <0x2fff0000 0x10000>;
838			#address-cells = <3>;
839			#size-cells = <2>;
840			clocks = <&sys_clk 24>;
841			resets = <&sys_rst 24>;
842			num-lanes = <1>;
843			num-viewport = <1>;
844			bus-range = <0x0 0xff>;
845			device_type = "pci";
846			ranges =
847			/* downstream I/O */
848				<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
849			/* non-prefetchable memory */
850				<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
851			#interrupt-cells = <1>;
852			interrupt-names = "dma", "msi";
853			interrupts = <0 224 4>, <0 225 4>;
854			interrupt-map-mask = <0 0 0 7>;
855			interrupt-map = <0 0 0 1 &pcie_intc 0>,	/* INTA */
856					<0 0 0 2 &pcie_intc 1>,	/* INTB */
857					<0 0 0 3 &pcie_intc 2>,	/* INTC */
858					<0 0 0 4 &pcie_intc 3>;	/* INTD */
859			phy-names = "pcie-phy";
860			phys = <&pcie_phy>;
861
862			pcie_intc: legacy-interrupt-controller {
863				interrupt-controller;
864				#interrupt-cells = <1>;
865				interrupt-parent = <&gic>;
866				interrupts = <0 226 4>;
867			};
868		};
869
870		pcie_phy: phy@66038000 {
871			compatible = "socionext,uniphier-pxs3-pcie-phy";
872			reg = <0x66038000 0x4000>;
873			#phy-cells = <0>;
874			clock-names = "link";
875			clocks = <&sys_clk 24>;
876			reset-names = "link";
877			resets = <&sys_rst 24>;
878			socionext,syscon = <&soc_glue>;
879		};
880
881		nand: nand-controller@68000000 {
882			compatible = "socionext,uniphier-denali-nand-v5b";
883			status = "disabled";
884			reg-names = "nand_data", "denali_reg";
885			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
886			interrupts = <0 65 4>;
887			pinctrl-names = "default";
888			pinctrl-0 = <&pinctrl_nand>;
889			clock-names = "nand", "nand_x", "ecc";
890			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
891			reset-names = "nand", "reg";
892			resets = <&sys_rst 2>, <&sys_rst 2>;
893		};
894	};
895};
896
897#include "uniphier-pinctrl.dtsi"
898