1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * NVIDIA Tegra SPI controller (T114 and later)
4  *
5  * Copyright (c) 2010-2013 NVIDIA Corporation
6  */
7 
8 #include <common.h>
9 #include <dm.h>
10 #include <log.h>
11 #include <time.h>
12 #include <asm/io.h>
13 #include <asm/arch/clock.h>
14 #include <asm/arch-tegra/clk_rst.h>
15 #include <spi.h>
16 #include <linux/bitops.h>
17 #include <linux/delay.h>
18 #include "tegra_spi.h"
19 
20 /* COMMAND1 */
21 #define SPI_CMD1_GO			BIT(31)
22 #define SPI_CMD1_M_S			BIT(30)
23 #define SPI_CMD1_MODE_MASK		GENMASK(1, 0)
24 #define SPI_CMD1_MODE_SHIFT		28
25 #define SPI_CMD1_CS_SEL_MASK		GENMASK(1, 0)
26 #define SPI_CMD1_CS_SEL_SHIFT		26
27 #define SPI_CMD1_CS_POL_INACTIVE3	BIT(25)
28 #define SPI_CMD1_CS_POL_INACTIVE2	BIT(24)
29 #define SPI_CMD1_CS_POL_INACTIVE1	BIT(23)
30 #define SPI_CMD1_CS_POL_INACTIVE0	BIT(22)
31 #define SPI_CMD1_CS_SW_HW		BIT(21)
32 #define SPI_CMD1_CS_SW_VAL		BIT(20)
33 #define SPI_CMD1_IDLE_SDA_MASK		GENMASK(1, 0)
34 #define SPI_CMD1_IDLE_SDA_SHIFT		18
35 #define SPI_CMD1_BIDIR			BIT(17)
36 #define SPI_CMD1_LSBI_FE		BIT(16)
37 #define SPI_CMD1_LSBY_FE		BIT(15)
38 #define SPI_CMD1_BOTH_EN_BIT		BIT(14)
39 #define SPI_CMD1_BOTH_EN_BYTE		BIT(13)
40 #define SPI_CMD1_RX_EN			BIT(12)
41 #define SPI_CMD1_TX_EN			BIT(11)
42 #define SPI_CMD1_PACKED			BIT(5)
43 #define SPI_CMD1_BIT_LEN_MASK		GENMASK(4, 0)
44 #define SPI_CMD1_BIT_LEN_SHIFT		0
45 
46 /* COMMAND2 */
47 #define SPI_CMD2_TX_CLK_TAP_DELAY	BIT(6)
48 #define SPI_CMD2_TX_CLK_TAP_DELAY_MASK	GENMASK(11, 6)
49 #define SPI_CMD2_RX_CLK_TAP_DELAY	BIT(0)
50 #define SPI_CMD2_RX_CLK_TAP_DELAY_MASK	GENMASK(5, 0)
51 
52 /* TRANSFER STATUS */
53 #define SPI_XFER_STS_RDY		BIT(30)
54 
55 /* FIFO STATUS */
56 #define SPI_FIFO_STS_CS_INACTIVE	BIT(31)
57 #define SPI_FIFO_STS_FRAME_END		BIT(30)
58 #define SPI_FIFO_STS_RX_FIFO_FLUSH	BIT(15)
59 #define SPI_FIFO_STS_TX_FIFO_FLUSH	BIT(14)
60 #define SPI_FIFO_STS_ERR		BIT(8)
61 #define SPI_FIFO_STS_TX_FIFO_OVF	BIT(7)
62 #define SPI_FIFO_STS_TX_FIFO_UNR	BIT(6)
63 #define SPI_FIFO_STS_RX_FIFO_OVF	BIT(5)
64 #define SPI_FIFO_STS_RX_FIFO_UNR	BIT(4)
65 #define SPI_FIFO_STS_TX_FIFO_FULL	BIT(3)
66 #define SPI_FIFO_STS_TX_FIFO_EMPTY	BIT(2)
67 #define SPI_FIFO_STS_RX_FIFO_FULL	BIT(1)
68 #define SPI_FIFO_STS_RX_FIFO_EMPTY	BIT(0)
69 
70 #define SPI_TIMEOUT		1000
71 #define TEGRA_SPI_MAX_FREQ	52000000
72 
73 struct spi_regs {
74 	u32 command1;	/* 000:SPI_COMMAND1 register */
75 	u32 command2;	/* 004:SPI_COMMAND2 register */
76 	u32 timing1;	/* 008:SPI_CS_TIM1 register */
77 	u32 timing2;	/* 00c:SPI_CS_TIM2 register */
78 	u32 xfer_status;/* 010:SPI_TRANS_STATUS register */
79 	u32 fifo_status;/* 014:SPI_FIFO_STATUS register */
80 	u32 tx_data;	/* 018:SPI_TX_DATA register */
81 	u32 rx_data;	/* 01c:SPI_RX_DATA register */
82 	u32 dma_ctl;	/* 020:SPI_DMA_CTL register */
83 	u32 dma_blk;	/* 024:SPI_DMA_BLK register */
84 	u32 rsvd[56];	/* 028-107 reserved */
85 	u32 tx_fifo;	/* 108:SPI_FIFO1 register */
86 	u32 rsvd2[31];	/* 10c-187 reserved */
87 	u32 rx_fifo;	/* 188:SPI_FIFO2 register */
88 	u32 spare_ctl;	/* 18c:SPI_SPARE_CTRL register */
89 };
90 
91 struct tegra114_spi_priv {
92 	struct spi_regs *regs;
93 	unsigned int freq;
94 	unsigned int mode;
95 	int periph_id;
96 	int valid;
97 	int last_transaction_us;
98 };
99 
tegra114_spi_of_to_plat(struct udevice * bus)100 static int tegra114_spi_of_to_plat(struct udevice *bus)
101 {
102 	struct tegra_spi_plat *plat = dev_get_plat(bus);
103 
104 	plat->base = dev_read_addr(bus);
105 	plat->periph_id = clock_decode_periph_id(bus);
106 
107 	if (plat->periph_id == PERIPH_ID_NONE) {
108 		debug("%s: could not decode periph id %d\n", __func__,
109 		      plat->periph_id);
110 		return -FDT_ERR_NOTFOUND;
111 	}
112 
113 	/* Use 500KHz as a suitable default */
114 	plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
115 					       500000);
116 	plat->deactivate_delay_us = dev_read_u32_default(bus,
117 						"spi-deactivate-delay", 0);
118 	debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
119 	      __func__, plat->base, plat->periph_id, plat->frequency,
120 	      plat->deactivate_delay_us);
121 
122 	return 0;
123 }
124 
tegra114_spi_probe(struct udevice * bus)125 static int tegra114_spi_probe(struct udevice *bus)
126 {
127 	struct tegra_spi_plat *plat = dev_get_plat(bus);
128 	struct tegra114_spi_priv *priv = dev_get_priv(bus);
129 	struct spi_regs *regs;
130 	ulong rate;
131 
132 	priv->regs = (struct spi_regs *)plat->base;
133 	regs = priv->regs;
134 
135 	priv->last_transaction_us = timer_get_us();
136 	priv->freq = plat->frequency;
137 	priv->periph_id = plat->periph_id;
138 
139 	/*
140 	 * Change SPI clock to correct frequency, PLLP_OUT0 source, falling
141 	 * back to the oscillator if that is too fast.
142 	 */
143 	rate = clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
144 				      priv->freq);
145 	if (rate > priv->freq + 100000) {
146 		rate = clock_start_periph_pll(priv->periph_id, CLOCK_ID_OSC,
147 					      priv->freq);
148 		if (rate != priv->freq) {
149 			printf("Warning: SPI '%s' requested clock %u, actual clock %lu\n",
150 			       bus->name, priv->freq, rate);
151 		}
152 	}
153 	udelay(plat->deactivate_delay_us);
154 
155 	/* Clear stale status here */
156 	setbits_le32(&regs->fifo_status,
157 		     SPI_FIFO_STS_ERR		|
158 		     SPI_FIFO_STS_TX_FIFO_OVF	|
159 		     SPI_FIFO_STS_TX_FIFO_UNR	|
160 		     SPI_FIFO_STS_RX_FIFO_OVF	|
161 		     SPI_FIFO_STS_RX_FIFO_UNR	|
162 		     SPI_FIFO_STS_TX_FIFO_FULL	|
163 		     SPI_FIFO_STS_TX_FIFO_EMPTY	|
164 		     SPI_FIFO_STS_RX_FIFO_FULL	|
165 		     SPI_FIFO_STS_RX_FIFO_EMPTY);
166 	debug("%s: FIFO STATUS = %08x\n", __func__, readl(&regs->fifo_status));
167 
168 	setbits_le32(&priv->regs->command1, SPI_CMD1_M_S | SPI_CMD1_CS_SW_HW |
169 		     (priv->mode << SPI_CMD1_MODE_SHIFT) | SPI_CMD1_CS_SW_VAL);
170 	debug("%s: COMMAND1 = %08x\n", __func__, readl(&regs->command1));
171 
172 	return 0;
173 }
174 
175 /**
176  * Activate the CS by driving it LOW
177  *
178  * @param slave	Pointer to spi_slave to which controller has to
179  *		communicate with
180  */
spi_cs_activate(struct udevice * dev)181 static void spi_cs_activate(struct udevice *dev)
182 {
183 	struct udevice *bus = dev->parent;
184 	struct tegra_spi_plat *pdata = dev_get_plat(bus);
185 	struct tegra114_spi_priv *priv = dev_get_priv(bus);
186 
187 	/* If it's too soon to do another transaction, wait */
188 	if (pdata->deactivate_delay_us &&
189 	    priv->last_transaction_us) {
190 		ulong delay_us;		/* The delay completed so far */
191 		delay_us = timer_get_us() - priv->last_transaction_us;
192 		if (delay_us < pdata->deactivate_delay_us)
193 			udelay(pdata->deactivate_delay_us - delay_us);
194 	}
195 
196 	clrbits_le32(&priv->regs->command1, SPI_CMD1_CS_SW_VAL);
197 }
198 
199 /**
200  * Deactivate the CS by driving it HIGH
201  *
202  * @param slave	Pointer to spi_slave to which controller has to
203  *		communicate with
204  */
spi_cs_deactivate(struct udevice * dev)205 static void spi_cs_deactivate(struct udevice *dev)
206 {
207 	struct udevice *bus = dev->parent;
208 	struct tegra_spi_plat *pdata = dev_get_plat(bus);
209 	struct tegra114_spi_priv *priv = dev_get_priv(bus);
210 
211 	setbits_le32(&priv->regs->command1, SPI_CMD1_CS_SW_VAL);
212 
213 	/* Remember time of this transaction so we can honour the bus delay */
214 	if (pdata->deactivate_delay_us)
215 		priv->last_transaction_us = timer_get_us();
216 
217 	debug("Deactivate CS, bus '%s'\n", bus->name);
218 }
219 
tegra114_spi_xfer(struct udevice * dev,unsigned int bitlen,const void * data_out,void * data_in,unsigned long flags)220 static int tegra114_spi_xfer(struct udevice *dev, unsigned int bitlen,
221 			     const void *data_out, void *data_in,
222 			     unsigned long flags)
223 {
224 	struct udevice *bus = dev->parent;
225 	struct tegra114_spi_priv *priv = dev_get_priv(bus);
226 	struct spi_regs *regs = priv->regs;
227 	u32 reg, tmpdout, tmpdin = 0;
228 	const u8 *dout = data_out;
229 	u8 *din = data_in;
230 	int num_bytes;
231 	int ret;
232 
233 	debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
234 	      __func__, dev_seq(bus), spi_chip_select(dev), dout, din, bitlen);
235 	if (bitlen % 8)
236 		return -1;
237 	num_bytes = bitlen / 8;
238 
239 	ret = 0;
240 
241 	if (flags & SPI_XFER_BEGIN)
242 		spi_cs_activate(dev);
243 
244 	/* clear all error status bits */
245 	reg = readl(&regs->fifo_status);
246 	writel(reg, &regs->fifo_status);
247 
248 	clrsetbits_le32(&regs->command1, SPI_CMD1_CS_SW_VAL,
249 			SPI_CMD1_RX_EN | SPI_CMD1_TX_EN | SPI_CMD1_LSBY_FE |
250 			(spi_chip_select(dev) << SPI_CMD1_CS_SEL_SHIFT));
251 
252 	/* set xfer size to 1 block (32 bits) */
253 	writel(0, &regs->dma_blk);
254 
255 	/* handle data in 32-bit chunks */
256 	while (num_bytes > 0) {
257 		int bytes;
258 		int tm, i;
259 
260 		tmpdout = 0;
261 		bytes = (num_bytes > 4) ?  4 : num_bytes;
262 
263 		if (dout != NULL) {
264 			for (i = 0; i < bytes; ++i)
265 				tmpdout = (tmpdout << 8) | dout[i];
266 			dout += bytes;
267 		}
268 
269 		num_bytes -= bytes;
270 
271 		/* clear ready bit */
272 		setbits_le32(&regs->xfer_status, SPI_XFER_STS_RDY);
273 
274 		clrsetbits_le32(&regs->command1,
275 				SPI_CMD1_BIT_LEN_MASK << SPI_CMD1_BIT_LEN_SHIFT,
276 				(bytes * 8 - 1) << SPI_CMD1_BIT_LEN_SHIFT);
277 		writel(tmpdout, &regs->tx_fifo);
278 		setbits_le32(&regs->command1, SPI_CMD1_GO);
279 
280 		/*
281 		 * Wait for SPI transmit FIFO to empty, or to time out.
282 		 * The RX FIFO status will be read and cleared last
283 		 */
284 		for (tm = 0; tm < SPI_TIMEOUT; ++tm) {
285 			u32 fifo_status, xfer_status;
286 
287 			xfer_status = readl(&regs->xfer_status);
288 			if (!(xfer_status & SPI_XFER_STS_RDY))
289 				continue;
290 
291 			fifo_status = readl(&regs->fifo_status);
292 			if (fifo_status & SPI_FIFO_STS_ERR) {
293 				debug("%s: got a fifo error: ", __func__);
294 				if (fifo_status & SPI_FIFO_STS_TX_FIFO_OVF)
295 					debug("tx FIFO overflow ");
296 				if (fifo_status & SPI_FIFO_STS_TX_FIFO_UNR)
297 					debug("tx FIFO underrun ");
298 				if (fifo_status & SPI_FIFO_STS_RX_FIFO_OVF)
299 					debug("rx FIFO overflow ");
300 				if (fifo_status & SPI_FIFO_STS_RX_FIFO_UNR)
301 					debug("rx FIFO underrun ");
302 				if (fifo_status & SPI_FIFO_STS_TX_FIFO_FULL)
303 					debug("tx FIFO full ");
304 				if (fifo_status & SPI_FIFO_STS_TX_FIFO_EMPTY)
305 					debug("tx FIFO empty ");
306 				if (fifo_status & SPI_FIFO_STS_RX_FIFO_FULL)
307 					debug("rx FIFO full ");
308 				if (fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)
309 					debug("rx FIFO empty ");
310 				debug("\n");
311 				break;
312 			}
313 
314 			if (!(fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)) {
315 				tmpdin = readl(&regs->rx_fifo);
316 
317 				/* swap bytes read in */
318 				if (din != NULL) {
319 					for (i = bytes - 1; i >= 0; --i) {
320 						din[i] = tmpdin & 0xff;
321 						tmpdin >>= 8;
322 					}
323 					din += bytes;
324 				}
325 
326 				/* We can exit when we've had both RX and TX */
327 				break;
328 			}
329 		}
330 
331 		if (tm >= SPI_TIMEOUT)
332 			ret = tm;
333 
334 		/* clear ACK RDY, etc. bits */
335 		writel(readl(&regs->fifo_status), &regs->fifo_status);
336 	}
337 
338 	if (flags & SPI_XFER_END)
339 		spi_cs_deactivate(dev);
340 
341 	debug("%s: transfer ended. Value=%08x, fifo_status = %08x\n",
342 	      __func__, tmpdin, readl(&regs->fifo_status));
343 
344 	if (ret) {
345 		printf("%s: timeout during SPI transfer, tm %d\n",
346 		       __func__, ret);
347 		return -1;
348 	}
349 
350 	return ret;
351 }
352 
tegra114_spi_set_speed(struct udevice * bus,uint speed)353 static int tegra114_spi_set_speed(struct udevice *bus, uint speed)
354 {
355 	struct tegra_spi_plat *plat = dev_get_plat(bus);
356 	struct tegra114_spi_priv *priv = dev_get_priv(bus);
357 
358 	if (speed > plat->frequency)
359 		speed = plat->frequency;
360 	priv->freq = speed;
361 	debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq);
362 
363 	return 0;
364 }
365 
tegra114_spi_set_mode(struct udevice * bus,uint mode)366 static int tegra114_spi_set_mode(struct udevice *bus, uint mode)
367 {
368 	struct tegra114_spi_priv *priv = dev_get_priv(bus);
369 
370 	priv->mode = mode;
371 	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
372 
373 	return 0;
374 }
375 
376 static const struct dm_spi_ops tegra114_spi_ops = {
377 	.xfer		= tegra114_spi_xfer,
378 	.set_speed	= tegra114_spi_set_speed,
379 	.set_mode	= tegra114_spi_set_mode,
380 	/*
381 	 * cs_info is not needed, since we require all chip selects to be
382 	 * in the device tree explicitly
383 	 */
384 };
385 
386 static const struct udevice_id tegra114_spi_ids[] = {
387 	{ .compatible = "nvidia,tegra114-spi" },
388 	{ }
389 };
390 
391 U_BOOT_DRIVER(tegra114_spi) = {
392 	.name	= "tegra114_spi",
393 	.id	= UCLASS_SPI,
394 	.of_match = tegra114_spi_ids,
395 	.ops	= &tegra114_spi_ops,
396 	.of_to_plat = tegra114_spi_of_to_plat,
397 	.plat_auto	= sizeof(struct tegra_spi_plat),
398 	.priv_auto	= sizeof(struct tegra114_spi_priv),
399 	.probe	= tegra114_spi_probe,
400 };
401