1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) Freescale Semiconductor, Inc. 2006.
4 * Author: Jason Jin<Jason.jin@freescale.com>
5 * Zhang Wei<wei.zhang@freescale.com>
6 *
7 * with the reference on libata and ahci drvier in kernel
8 *
9 * This driver provides a SCSI interface to SATA.
10 */
11 #include <common.h>
12 #include <blk.h>
13 #include <cpu_func.h>
14 #include <log.h>
15 #include <linux/bitops.h>
16 #include <linux/delay.h>
17
18 #include <command.h>
19 #include <dm.h>
20 #include <pci.h>
21 #include <asm/processor.h>
22 #include <linux/errno.h>
23 #include <asm/io.h>
24 #include <malloc.h>
25 #include <memalign.h>
26 #include <pci.h>
27 #include <scsi.h>
28 #include <libata.h>
29 #include <linux/ctype.h>
30 #include <ahci.h>
31 #include <dm/device-internal.h>
32 #include <dm/lists.h>
33
34 static int ata_io_flush(struct ahci_uc_priv *uc_priv, u8 port);
35
36 #ifndef CONFIG_DM_SCSI
37 struct ahci_uc_priv *probe_ent = NULL;
38 #endif
39
40 #define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
41
42 /*
43 * Some controllers limit number of blocks they can read/write at once.
44 * Contemporary SSD devices work much faster if the read/write size is aligned
45 * to a power of 2. Let's set default to 128 and allowing to be overwritten if
46 * needed.
47 */
48 #ifndef MAX_SATA_BLOCKS_READ_WRITE
49 #define MAX_SATA_BLOCKS_READ_WRITE 0x80
50 #endif
51
52 /* Maximum timeouts for each event */
53 #define WAIT_MS_SPINUP 20000
54 #define WAIT_MS_DATAIO 10000
55 #define WAIT_MS_FLUSH 5000
56 #define WAIT_MS_LINKUP 200
57
58 #define AHCI_CAP_S64A BIT(31)
59
ahci_port_base(void __iomem * base,u32 port)60 __weak void __iomem *ahci_port_base(void __iomem *base, u32 port)
61 {
62 return base + 0x100 + (port * 0x80);
63 }
64
65 #define msleep(a) udelay(a * 1000)
66
ahci_dcache_flush_range(unsigned long begin,unsigned long len)67 static void ahci_dcache_flush_range(unsigned long begin, unsigned long len)
68 {
69 const unsigned long start = begin;
70 const unsigned long end = start + len;
71
72 debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end);
73 flush_dcache_range(start, end);
74 }
75
76 /*
77 * SATA controller DMAs to physical RAM. Ensure data from the
78 * controller is invalidated from dcache; next access comes from
79 * physical RAM.
80 */
ahci_dcache_invalidate_range(unsigned long begin,unsigned long len)81 static void ahci_dcache_invalidate_range(unsigned long begin, unsigned long len)
82 {
83 const unsigned long start = begin;
84 const unsigned long end = start + len;
85
86 debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end);
87 invalidate_dcache_range(start, end);
88 }
89
90 /*
91 * Ensure data for SATA controller is flushed out of dcache and
92 * written to physical memory.
93 */
ahci_dcache_flush_sata_cmd(struct ahci_ioports * pp)94 static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp)
95 {
96 ahci_dcache_flush_range((unsigned long)pp->cmd_slot,
97 AHCI_PORT_PRIV_DMA_SZ);
98 }
99
waiting_for_cmd_completed(void __iomem * offset,int timeout_msec,u32 sign)100 static int waiting_for_cmd_completed(void __iomem *offset,
101 int timeout_msec,
102 u32 sign)
103 {
104 int i;
105 u32 status;
106
107 for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++)
108 msleep(1);
109
110 return (i < timeout_msec) ? 0 : -1;
111 }
112
ahci_link_up(struct ahci_uc_priv * uc_priv,int port)113 int __weak ahci_link_up(struct ahci_uc_priv *uc_priv, int port)
114 {
115 u32 tmp;
116 int j = 0;
117 void __iomem *port_mmio = uc_priv->port[port].port_mmio;
118
119 /*
120 * Bring up SATA link.
121 * SATA link bringup time is usually less than 1 ms; only very
122 * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
123 */
124 while (j < WAIT_MS_LINKUP) {
125 tmp = readl(port_mmio + PORT_SCR_STAT);
126 tmp &= PORT_SCR_STAT_DET_MASK;
127 if (tmp == PORT_SCR_STAT_DET_PHYRDY)
128 return 0;
129 udelay(1000);
130 j++;
131 }
132 return 1;
133 }
134
135 #ifdef CONFIG_SUNXI_AHCI
136 /* The sunxi AHCI controller requires this undocumented setup */
sunxi_dma_init(void __iomem * port_mmio)137 static void sunxi_dma_init(void __iomem *port_mmio)
138 {
139 clrsetbits_le32(port_mmio + PORT_P0DMACR, 0x0000ff00, 0x00004400);
140 }
141 #endif
142
ahci_reset(void __iomem * base)143 int ahci_reset(void __iomem *base)
144 {
145 int i = 1000;
146 u32 __iomem *host_ctl_reg = base + HOST_CTL;
147 u32 tmp = readl(host_ctl_reg); /* global controller reset */
148
149 if ((tmp & HOST_RESET) == 0)
150 writel_with_flush(tmp | HOST_RESET, host_ctl_reg);
151
152 /*
153 * reset must complete within 1 second, or
154 * the hardware should be considered fried.
155 */
156 do {
157 udelay(1000);
158 tmp = readl(host_ctl_reg);
159 i--;
160 } while ((i > 0) && (tmp & HOST_RESET));
161
162 if (i == 0) {
163 printf("controller reset failed (0x%x)\n", tmp);
164 return -1;
165 }
166
167 return 0;
168 }
169
ahci_host_init(struct ahci_uc_priv * uc_priv)170 static int ahci_host_init(struct ahci_uc_priv *uc_priv)
171 {
172 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
173 # ifdef CONFIG_DM_PCI
174 struct udevice *dev = uc_priv->dev;
175 struct pci_child_plat *pplat = dev_get_parent_plat(dev);
176 # else
177 pci_dev_t pdev = uc_priv->dev;
178 unsigned short vendor;
179 # endif
180 u16 tmp16;
181 #endif
182 void __iomem *mmio = uc_priv->mmio_base;
183 u32 tmp, cap_save, cmd;
184 int i, j, ret;
185 void __iomem *port_mmio;
186 u32 port_map;
187
188 debug("ahci_host_init: start\n");
189
190 cap_save = readl(mmio + HOST_CAP);
191 cap_save &= ((1 << 28) | (1 << 17));
192 cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */
193
194 ret = ahci_reset(uc_priv->mmio_base);
195 if (ret)
196 return ret;
197
198 writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
199 writel(cap_save, mmio + HOST_CAP);
200 writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
201
202 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
203 # ifdef CONFIG_DM_PCI
204 if (pplat->vendor == PCI_VENDOR_ID_INTEL) {
205 u16 tmp16;
206
207 dm_pci_read_config16(dev, 0x92, &tmp16);
208 dm_pci_write_config16(dev, 0x92, tmp16 | 0xf);
209 }
210 # else
211 pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
212
213 if (vendor == PCI_VENDOR_ID_INTEL) {
214 u16 tmp16;
215 pci_read_config_word(pdev, 0x92, &tmp16);
216 tmp16 |= 0xf;
217 pci_write_config_word(pdev, 0x92, tmp16);
218 }
219 # endif
220 #endif
221 uc_priv->cap = readl(mmio + HOST_CAP);
222 uc_priv->port_map = readl(mmio + HOST_PORTS_IMPL);
223 port_map = uc_priv->port_map;
224 uc_priv->n_ports = (uc_priv->cap & 0x1f) + 1;
225
226 debug("cap 0x%x port_map 0x%x n_ports %d\n",
227 uc_priv->cap, uc_priv->port_map, uc_priv->n_ports);
228
229 #if !defined(CONFIG_DM_SCSI)
230 if (uc_priv->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
231 uc_priv->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
232 #endif
233
234 for (i = 0; i < uc_priv->n_ports; i++) {
235 if (!(port_map & (1 << i)))
236 continue;
237 uc_priv->port[i].port_mmio = ahci_port_base(mmio, i);
238 port_mmio = (u8 *)uc_priv->port[i].port_mmio;
239
240 /* make sure port is not active */
241 tmp = readl(port_mmio + PORT_CMD);
242 if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
243 PORT_CMD_FIS_RX | PORT_CMD_START)) {
244 debug("Port %d is active. Deactivating.\n", i);
245 tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
246 PORT_CMD_FIS_RX | PORT_CMD_START);
247 writel_with_flush(tmp, port_mmio + PORT_CMD);
248
249 /* spec says 500 msecs for each bit, so
250 * this is slightly incorrect.
251 */
252 msleep(500);
253 }
254
255 #ifdef CONFIG_SUNXI_AHCI
256 sunxi_dma_init(port_mmio);
257 #endif
258
259 /* Add the spinup command to whatever mode bits may
260 * already be on in the command register.
261 */
262 cmd = readl(port_mmio + PORT_CMD);
263 cmd |= PORT_CMD_SPIN_UP;
264 writel_with_flush(cmd, port_mmio + PORT_CMD);
265
266 /* Bring up SATA link. */
267 ret = ahci_link_up(uc_priv, i);
268 if (ret) {
269 printf("SATA link %d timeout.\n", i);
270 continue;
271 } else {
272 debug("SATA link ok.\n");
273 }
274
275 /* Clear error status */
276 tmp = readl(port_mmio + PORT_SCR_ERR);
277 if (tmp)
278 writel(tmp, port_mmio + PORT_SCR_ERR);
279
280 debug("Spinning up device on SATA port %d... ", i);
281
282 j = 0;
283 while (j < WAIT_MS_SPINUP) {
284 tmp = readl(port_mmio + PORT_TFDATA);
285 if (!(tmp & (ATA_BUSY | ATA_DRQ)))
286 break;
287 udelay(1000);
288 tmp = readl(port_mmio + PORT_SCR_STAT);
289 tmp &= PORT_SCR_STAT_DET_MASK;
290 if (tmp == PORT_SCR_STAT_DET_PHYRDY)
291 break;
292 j++;
293 }
294
295 tmp = readl(port_mmio + PORT_SCR_STAT) & PORT_SCR_STAT_DET_MASK;
296 if (tmp == PORT_SCR_STAT_DET_COMINIT) {
297 debug("SATA link %d down (COMINIT received), retrying...\n", i);
298 i--;
299 continue;
300 }
301
302 printf("Target spinup took %d ms.\n", j);
303 if (j == WAIT_MS_SPINUP)
304 debug("timeout.\n");
305 else
306 debug("ok.\n");
307
308 tmp = readl(port_mmio + PORT_SCR_ERR);
309 debug("PORT_SCR_ERR 0x%x\n", tmp);
310 writel(tmp, port_mmio + PORT_SCR_ERR);
311
312 /* ack any pending irq events for this port */
313 tmp = readl(port_mmio + PORT_IRQ_STAT);
314 debug("PORT_IRQ_STAT 0x%x\n", tmp);
315 if (tmp)
316 writel(tmp, port_mmio + PORT_IRQ_STAT);
317
318 writel(1 << i, mmio + HOST_IRQ_STAT);
319
320 /* register linkup ports */
321 tmp = readl(port_mmio + PORT_SCR_STAT);
322 debug("SATA port %d status: 0x%x\n", i, tmp);
323 if ((tmp & PORT_SCR_STAT_DET_MASK) == PORT_SCR_STAT_DET_PHYRDY)
324 uc_priv->link_port_map |= (0x01 << i);
325 }
326
327 tmp = readl(mmio + HOST_CTL);
328 debug("HOST_CTL 0x%x\n", tmp);
329 writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
330 tmp = readl(mmio + HOST_CTL);
331 debug("HOST_CTL 0x%x\n", tmp);
332 #if !defined(CONFIG_DM_SCSI)
333 #ifndef CONFIG_SCSI_AHCI_PLAT
334 # ifdef CONFIG_DM_PCI
335 dm_pci_read_config16(dev, PCI_COMMAND, &tmp16);
336 tmp |= PCI_COMMAND_MASTER;
337 dm_pci_write_config16(dev, PCI_COMMAND, tmp16);
338 # else
339 pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
340 tmp |= PCI_COMMAND_MASTER;
341 pci_write_config_word(pdev, PCI_COMMAND, tmp16);
342 # endif
343 #endif
344 #endif
345 return 0;
346 }
347
348
ahci_print_info(struct ahci_uc_priv * uc_priv)349 static void ahci_print_info(struct ahci_uc_priv *uc_priv)
350 {
351 #if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
352 # if defined(CONFIG_DM_PCI)
353 struct udevice *dev = uc_priv->dev;
354 # else
355 pci_dev_t pdev = uc_priv->dev;
356 # endif
357 u16 cc;
358 #endif
359 void __iomem *mmio = uc_priv->mmio_base;
360 u32 vers, cap, cap2, impl, speed;
361 const char *speed_s;
362 const char *scc_s;
363
364 vers = readl(mmio + HOST_VERSION);
365 cap = uc_priv->cap;
366 cap2 = readl(mmio + HOST_CAP2);
367 impl = uc_priv->port_map;
368
369 speed = (cap >> 20) & 0xf;
370 if (speed == 1)
371 speed_s = "1.5";
372 else if (speed == 2)
373 speed_s = "3";
374 else if (speed == 3)
375 speed_s = "6";
376 else
377 speed_s = "?";
378
379 #if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI)
380 scc_s = "SATA";
381 #else
382 # ifdef CONFIG_DM_PCI
383 dm_pci_read_config16(dev, 0x0a, &cc);
384 # else
385 pci_read_config_word(pdev, 0x0a, &cc);
386 # endif
387 if (cc == 0x0101)
388 scc_s = "IDE";
389 else if (cc == 0x0106)
390 scc_s = "SATA";
391 else if (cc == 0x0104)
392 scc_s = "RAID";
393 else
394 scc_s = "unknown";
395 #endif
396 printf("AHCI %02x%02x.%02x%02x "
397 "%u slots %u ports %s Gbps 0x%x impl %s mode\n",
398 (vers >> 24) & 0xff,
399 (vers >> 16) & 0xff,
400 (vers >> 8) & 0xff,
401 vers & 0xff,
402 ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
403
404 printf("flags: "
405 "%s%s%s%s%s%s%s"
406 "%s%s%s%s%s%s%s"
407 "%s%s%s%s%s%s\n",
408 cap & (1 << 31) ? "64bit " : "",
409 cap & (1 << 30) ? "ncq " : "",
410 cap & (1 << 28) ? "ilck " : "",
411 cap & (1 << 27) ? "stag " : "",
412 cap & (1 << 26) ? "pm " : "",
413 cap & (1 << 25) ? "led " : "",
414 cap & (1 << 24) ? "clo " : "",
415 cap & (1 << 19) ? "nz " : "",
416 cap & (1 << 18) ? "only " : "",
417 cap & (1 << 17) ? "pmp " : "",
418 cap & (1 << 16) ? "fbss " : "",
419 cap & (1 << 15) ? "pio " : "",
420 cap & (1 << 14) ? "slum " : "",
421 cap & (1 << 13) ? "part " : "",
422 cap & (1 << 7) ? "ccc " : "",
423 cap & (1 << 6) ? "ems " : "",
424 cap & (1 << 5) ? "sxs " : "",
425 cap2 & (1 << 2) ? "apst " : "",
426 cap2 & (1 << 1) ? "nvmp " : "",
427 cap2 & (1 << 0) ? "boh " : "");
428 }
429
430 #if defined(CONFIG_DM_SCSI) || !defined(CONFIG_SCSI_AHCI_PLAT)
431 # if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
ahci_init_one(struct ahci_uc_priv * uc_priv,struct udevice * dev)432 static int ahci_init_one(struct ahci_uc_priv *uc_priv, struct udevice *dev)
433 # else
434 static int ahci_init_one(struct ahci_uc_priv *uc_priv, pci_dev_t dev)
435 # endif
436 {
437 #if !defined(CONFIG_DM_SCSI)
438 u16 vendor;
439 #endif
440 int rc;
441
442 uc_priv->dev = dev;
443
444 uc_priv->host_flags = ATA_FLAG_SATA
445 | ATA_FLAG_NO_LEGACY
446 | ATA_FLAG_MMIO
447 | ATA_FLAG_PIO_DMA
448 | ATA_FLAG_NO_ATAPI;
449 uc_priv->pio_mask = 0x1f;
450 uc_priv->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
451
452 #if !defined(CONFIG_DM_SCSI)
453 #ifdef CONFIG_DM_PCI
454 uc_priv->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5,
455 PCI_REGION_MEM);
456
457 /* Take from kernel:
458 * JMicron-specific fixup:
459 * make sure we're in AHCI mode
460 */
461 dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor);
462 if (vendor == 0x197b)
463 dm_pci_write_config8(dev, 0x41, 0xa1);
464 #else
465 uc_priv->mmio_base = pci_map_bar(dev, PCI_BASE_ADDRESS_5,
466 PCI_REGION_MEM);
467
468 /* Take from kernel:
469 * JMicron-specific fixup:
470 * make sure we're in AHCI mode
471 */
472 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
473 if (vendor == 0x197b)
474 pci_write_config_byte(dev, 0x41, 0xa1);
475 #endif
476 #else
477 struct scsi_plat *plat = dev_get_uclass_plat(dev);
478 uc_priv->mmio_base = (void *)plat->base;
479 #endif
480
481 debug("ahci mmio_base=0x%p\n", uc_priv->mmio_base);
482 /* initialize adapter */
483 rc = ahci_host_init(uc_priv);
484 if (rc)
485 goto err_out;
486
487 ahci_print_info(uc_priv);
488
489 return 0;
490
491 err_out:
492 return rc;
493 }
494 #endif
495
496 #define MAX_DATA_BYTE_COUNT (4*1024*1024)
497
ahci_fill_sg(struct ahci_uc_priv * uc_priv,u8 port,unsigned char * buf,int buf_len)498 static int ahci_fill_sg(struct ahci_uc_priv *uc_priv, u8 port,
499 unsigned char *buf, int buf_len)
500 {
501 struct ahci_ioports *pp = &(uc_priv->port[port]);
502 struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
503 phys_addr_t pa = virt_to_phys(buf);
504 u32 sg_count;
505 int i;
506
507 sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1;
508 if (sg_count > AHCI_MAX_SG) {
509 printf("Error:Too much sg!\n");
510 return -1;
511 }
512
513 for (i = 0; i < sg_count; i++) {
514 ahci_sg->addr = cpu_to_le32(lower_32_bits(pa));
515 ahci_sg->addr_hi = cpu_to_le32(upper_32_bits(pa));
516 if (ahci_sg->addr_hi && !(uc_priv->cap & AHCI_CAP_S64A)) {
517 printf("Error: DMA address too high\n");
518 return -1;
519 }
520 ahci_sg->flags_size = cpu_to_le32(0x3fffff &
521 (buf_len < MAX_DATA_BYTE_COUNT ?
522 (buf_len - 1) :
523 (MAX_DATA_BYTE_COUNT - 1)));
524 ahci_sg++;
525 buf_len -= MAX_DATA_BYTE_COUNT;
526 pa += MAX_DATA_BYTE_COUNT;
527 }
528
529 return sg_count;
530 }
531
ahci_fill_cmd_slot(struct ahci_ioports * pp,u32 opts)532 static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts)
533 {
534 phys_addr_t pa = virt_to_phys((void *)pp->cmd_tbl);
535
536 pp->cmd_slot->opts = cpu_to_le32(opts);
537 pp->cmd_slot->status = 0;
538 pp->cmd_slot->tbl_addr = cpu_to_le32(lower_32_bits(pa));
539 #ifdef CONFIG_PHYS_64BIT
540 pp->cmd_slot->tbl_addr_hi = cpu_to_le32(upper_32_bits(pa));
541 #endif
542 }
543
wait_spinup(void __iomem * port_mmio)544 static int wait_spinup(void __iomem *port_mmio)
545 {
546 ulong start;
547 u32 tf_data;
548
549 start = get_timer(0);
550 do {
551 tf_data = readl(port_mmio + PORT_TFDATA);
552 if (!(tf_data & ATA_BUSY))
553 return 0;
554 } while (get_timer(start) < WAIT_MS_SPINUP);
555
556 return -ETIMEDOUT;
557 }
558
ahci_port_start(struct ahci_uc_priv * uc_priv,u8 port)559 static int ahci_port_start(struct ahci_uc_priv *uc_priv, u8 port)
560 {
561 struct ahci_ioports *pp = &(uc_priv->port[port]);
562 void __iomem *port_mmio = pp->port_mmio;
563 u64 dma_addr;
564 u32 port_status;
565 void __iomem *mem;
566
567 debug("Enter start port: %d\n", port);
568 port_status = readl(port_mmio + PORT_SCR_STAT);
569 debug("Port %d status: %x\n", port, port_status);
570 if ((port_status & 0xf) != 0x03) {
571 printf("No Link on this port!\n");
572 return -1;
573 }
574
575 mem = memalign(2048, AHCI_PORT_PRIV_DMA_SZ);
576 if (!mem) {
577 free(pp);
578 printf("%s: No mem for table!\n", __func__);
579 return -ENOMEM;
580 }
581 memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
582
583 /*
584 * First item in chunk of DMA memory: 32-slot command table,
585 * 32 bytes each in size
586 */
587 pp->cmd_slot =
588 (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem);
589 debug("cmd_slot = %p\n", pp->cmd_slot);
590 mem += (AHCI_CMD_SLOT_SZ + 224);
591
592 /*
593 * Second item: Received-FIS area
594 */
595 pp->rx_fis = virt_to_phys((void *)mem);
596 mem += AHCI_RX_FIS_SZ;
597
598 /*
599 * Third item: data area for storing a single command
600 * and its scatter-gather table
601 */
602 pp->cmd_tbl = virt_to_phys((void *)mem);
603 debug("cmd_tbl_dma = %lx\n", pp->cmd_tbl);
604
605 mem += AHCI_CMD_TBL_HDR;
606 pp->cmd_tbl_sg =
607 (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem);
608
609 dma_addr = (ulong)pp->cmd_slot;
610 writel_with_flush(dma_addr, port_mmio + PORT_LST_ADDR);
611 writel_with_flush(dma_addr >> 32, port_mmio + PORT_LST_ADDR_HI);
612 dma_addr = (ulong)pp->rx_fis;
613 writel_with_flush(dma_addr, port_mmio + PORT_FIS_ADDR);
614 writel_with_flush(dma_addr >> 32, port_mmio + PORT_FIS_ADDR_HI);
615
616 #ifdef CONFIG_SUNXI_AHCI
617 sunxi_dma_init(port_mmio);
618 #endif
619
620 writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
621 PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
622 PORT_CMD_START, port_mmio + PORT_CMD);
623
624 debug("Exit start port %d\n", port);
625
626 /*
627 * Make sure interface is not busy based on error and status
628 * information from task file data register before proceeding
629 */
630 return wait_spinup(port_mmio);
631 }
632
633
ahci_device_data_io(struct ahci_uc_priv * uc_priv,u8 port,u8 * fis,int fis_len,u8 * buf,int buf_len,u8 is_write)634 static int ahci_device_data_io(struct ahci_uc_priv *uc_priv, u8 port, u8 *fis,
635 int fis_len, u8 *buf, int buf_len, u8 is_write)
636 {
637
638 struct ahci_ioports *pp = &(uc_priv->port[port]);
639 void __iomem *port_mmio = pp->port_mmio;
640 u32 opts;
641 u32 port_status;
642 int sg_count;
643
644 debug("Enter %s: for port %d\n", __func__, port);
645
646 if (port > uc_priv->n_ports) {
647 printf("Invalid port number %d\n", port);
648 return -1;
649 }
650
651 port_status = readl(port_mmio + PORT_SCR_STAT);
652 if ((port_status & 0xf) != 0x03) {
653 debug("No Link on port %d!\n", port);
654 return -1;
655 }
656
657 memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
658
659 sg_count = ahci_fill_sg(uc_priv, port, buf, buf_len);
660 opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6);
661 ahci_fill_cmd_slot(pp, opts);
662
663 ahci_dcache_flush_sata_cmd(pp);
664 ahci_dcache_flush_range((unsigned long)buf, (unsigned long)buf_len);
665
666 writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
667
668 if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
669 WAIT_MS_DATAIO, 0x1)) {
670 printf("timeout exit!\n");
671 return -1;
672 }
673
674 ahci_dcache_invalidate_range((unsigned long)buf,
675 (unsigned long)buf_len);
676 debug("%s: %d byte transferred.\n", __func__,
677 le32_to_cpu(pp->cmd_slot->status));
678
679 return 0;
680 }
681
ata_id_strcpy(u16 * target,u16 * src,int len)682 static char *ata_id_strcpy(u16 *target, u16 *src, int len)
683 {
684 int i;
685 for (i = 0; i < len / 2; i++)
686 target[i] = swab16(src[i]);
687 return (char *)target;
688 }
689
690 /*
691 * SCSI INQUIRY command operation.
692 */
ata_scsiop_inquiry(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)693 static int ata_scsiop_inquiry(struct ahci_uc_priv *uc_priv,
694 struct scsi_cmd *pccb)
695 {
696 static const u8 hdr[] = {
697 0,
698 0,
699 0x5, /* claim SPC-3 version compatibility */
700 2,
701 95 - 4,
702 };
703 u8 fis[20];
704 u16 *idbuf;
705 ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
706 u8 port;
707
708 /* Clean ccb data buffer */
709 memset(pccb->pdata, 0, pccb->datalen);
710
711 memcpy(pccb->pdata, hdr, sizeof(hdr));
712
713 if (pccb->datalen <= 35)
714 return 0;
715
716 memset(fis, 0, sizeof(fis));
717 /* Construct the FIS */
718 fis[0] = 0x27; /* Host to device FIS. */
719 fis[1] = 1 << 7; /* Command FIS. */
720 fis[2] = ATA_CMD_ID_ATA; /* Command byte. */
721
722 /* Read id from sata */
723 port = pccb->target;
724
725 if (ahci_device_data_io(uc_priv, port, (u8 *)&fis, sizeof(fis),
726 (u8 *)tmpid, ATA_ID_WORDS * 2, 0)) {
727 debug("scsi_ahci: SCSI inquiry command failure.\n");
728 return -EIO;
729 }
730
731 if (!uc_priv->ataid[port]) {
732 uc_priv->ataid[port] = malloc(ATA_ID_WORDS * 2);
733 if (!uc_priv->ataid[port]) {
734 printf("%s: No memory for ataid[port]\n", __func__);
735 return -ENOMEM;
736 }
737 }
738
739 idbuf = uc_priv->ataid[port];
740
741 memcpy(idbuf, tmpid, ATA_ID_WORDS * 2);
742 ata_swap_buf_le16(idbuf, ATA_ID_WORDS);
743
744 memcpy(&pccb->pdata[8], "ATA ", 8);
745 ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16);
746 ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4);
747
748 #ifdef DEBUG
749 ata_dump_id(idbuf);
750 #endif
751 return 0;
752 }
753
754
755 /*
756 * SCSI READ10/WRITE10 command operation.
757 */
ata_scsiop_read_write(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb,u8 is_write)758 static int ata_scsiop_read_write(struct ahci_uc_priv *uc_priv,
759 struct scsi_cmd *pccb, u8 is_write)
760 {
761 lbaint_t lba = 0;
762 u16 blocks = 0;
763 u8 fis[20];
764 u8 *user_buffer = pccb->pdata;
765 u32 user_buffer_size = pccb->datalen;
766
767 /* Retrieve the base LBA number from the ccb structure. */
768 if (pccb->cmd[0] == SCSI_READ16) {
769 memcpy(&lba, pccb->cmd + 2, 8);
770 lba = be64_to_cpu(lba);
771 } else {
772 u32 temp;
773 memcpy(&temp, pccb->cmd + 2, 4);
774 lba = be32_to_cpu(temp);
775 }
776
777 /*
778 * Retrieve the base LBA number and the block count from
779 * the ccb structure.
780 *
781 * For 10-byte and 16-byte SCSI R/W commands, transfer
782 * length 0 means transfer 0 block of data.
783 * However, for ATA R/W commands, sector count 0 means
784 * 256 or 65536 sectors, not 0 sectors as in SCSI.
785 *
786 * WARNING: one or two older ATA drives treat 0 as 0...
787 */
788 if (pccb->cmd[0] == SCSI_READ16)
789 blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]);
790 else
791 blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
792
793 debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
794 is_write ? "write" : "read", blocks, lba);
795
796 /* Preset the FIS */
797 memset(fis, 0, sizeof(fis));
798 fis[0] = 0x27; /* Host to device FIS. */
799 fis[1] = 1 << 7; /* Command FIS. */
800 /* Command byte (read/write). */
801 fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
802
803 while (blocks) {
804 u16 now_blocks; /* number of blocks per iteration */
805 u32 transfer_size; /* number of bytes per iteration */
806
807 now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks);
808
809 transfer_size = ATA_SECT_SIZE * now_blocks;
810 if (transfer_size > user_buffer_size) {
811 printf("scsi_ahci: Error: buffer too small.\n");
812 return -EIO;
813 }
814
815 /*
816 * LBA48 SATA command but only use 32bit address range within
817 * that (unless we've enabled 64bit LBA support). The next
818 * smaller command range (28bit) is too small.
819 */
820 fis[4] = (lba >> 0) & 0xff;
821 fis[5] = (lba >> 8) & 0xff;
822 fis[6] = (lba >> 16) & 0xff;
823 fis[7] = 1 << 6; /* device reg: set LBA mode */
824 fis[8] = ((lba >> 24) & 0xff);
825 #ifdef CONFIG_SYS_64BIT_LBA
826 if (pccb->cmd[0] == SCSI_READ16) {
827 fis[9] = ((lba >> 32) & 0xff);
828 fis[10] = ((lba >> 40) & 0xff);
829 }
830 #endif
831
832 fis[3] = 0xe0; /* features */
833
834 /* Block (sector) count */
835 fis[12] = (now_blocks >> 0) & 0xff;
836 fis[13] = (now_blocks >> 8) & 0xff;
837
838 /* Read/Write from ahci */
839 if (ahci_device_data_io(uc_priv, pccb->target, (u8 *)&fis,
840 sizeof(fis), user_buffer, transfer_size,
841 is_write)) {
842 debug("scsi_ahci: SCSI %s10 command failure.\n",
843 is_write ? "WRITE" : "READ");
844 return -EIO;
845 }
846
847 /* If this transaction is a write, do a following flush.
848 * Writes in u-boot are so rare, and the logic to know when is
849 * the last write and do a flush only there is sufficiently
850 * difficult. Just do a flush after every write. This incurs,
851 * usually, one extra flush when the rare writes do happen.
852 */
853 if (is_write) {
854 if (-EIO == ata_io_flush(uc_priv, pccb->target))
855 return -EIO;
856 }
857 user_buffer += transfer_size;
858 user_buffer_size -= transfer_size;
859 blocks -= now_blocks;
860 lba += now_blocks;
861 }
862
863 return 0;
864 }
865
866
867 /*
868 * SCSI READ CAPACITY10 command operation.
869 */
ata_scsiop_read_capacity10(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)870 static int ata_scsiop_read_capacity10(struct ahci_uc_priv *uc_priv,
871 struct scsi_cmd *pccb)
872 {
873 u32 cap;
874 u64 cap64;
875 u32 block_size;
876
877 if (!uc_priv->ataid[pccb->target]) {
878 printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
879 "\tNo ATA info!\n"
880 "\tPlease run SCSI command INQUIRY first!\n");
881 return -EPERM;
882 }
883
884 cap64 = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
885 if (cap64 > 0x100000000ULL)
886 cap64 = 0xffffffff;
887
888 cap = cpu_to_be32(cap64);
889 memcpy(pccb->pdata, &cap, sizeof(cap));
890
891 block_size = cpu_to_be32((u32)512);
892 memcpy(&pccb->pdata[4], &block_size, 4);
893
894 return 0;
895 }
896
897
898 /*
899 * SCSI READ CAPACITY16 command operation.
900 */
ata_scsiop_read_capacity16(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)901 static int ata_scsiop_read_capacity16(struct ahci_uc_priv *uc_priv,
902 struct scsi_cmd *pccb)
903 {
904 u64 cap;
905 u64 block_size;
906
907 if (!uc_priv->ataid[pccb->target]) {
908 printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
909 "\tNo ATA info!\n"
910 "\tPlease run SCSI command INQUIRY first!\n");
911 return -EPERM;
912 }
913
914 cap = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
915 cap = cpu_to_be64(cap);
916 memcpy(pccb->pdata, &cap, sizeof(cap));
917
918 block_size = cpu_to_be64((u64)512);
919 memcpy(&pccb->pdata[8], &block_size, 8);
920
921 return 0;
922 }
923
924
925 /*
926 * SCSI TEST UNIT READY command operation.
927 */
ata_scsiop_test_unit_ready(struct ahci_uc_priv * uc_priv,struct scsi_cmd * pccb)928 static int ata_scsiop_test_unit_ready(struct ahci_uc_priv *uc_priv,
929 struct scsi_cmd *pccb)
930 {
931 return (uc_priv->ataid[pccb->target]) ? 0 : -EPERM;
932 }
933
934
ahci_scsi_exec(struct udevice * dev,struct scsi_cmd * pccb)935 static int ahci_scsi_exec(struct udevice *dev, struct scsi_cmd *pccb)
936 {
937 struct ahci_uc_priv *uc_priv;
938 #ifdef CONFIG_DM_SCSI
939 uc_priv = dev_get_uclass_priv(dev->parent);
940 #else
941 uc_priv = probe_ent;
942 #endif
943 int ret;
944
945 switch (pccb->cmd[0]) {
946 case SCSI_READ16:
947 case SCSI_READ10:
948 ret = ata_scsiop_read_write(uc_priv, pccb, 0);
949 break;
950 case SCSI_WRITE10:
951 ret = ata_scsiop_read_write(uc_priv, pccb, 1);
952 break;
953 case SCSI_RD_CAPAC10:
954 ret = ata_scsiop_read_capacity10(uc_priv, pccb);
955 break;
956 case SCSI_RD_CAPAC16:
957 ret = ata_scsiop_read_capacity16(uc_priv, pccb);
958 break;
959 case SCSI_TST_U_RDY:
960 ret = ata_scsiop_test_unit_ready(uc_priv, pccb);
961 break;
962 case SCSI_INQUIRY:
963 ret = ata_scsiop_inquiry(uc_priv, pccb);
964 break;
965 default:
966 printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
967 return -ENOTSUPP;
968 }
969
970 if (ret) {
971 debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
972 return ret;
973 }
974 return 0;
975
976 }
977
ahci_start_ports(struct ahci_uc_priv * uc_priv)978 static int ahci_start_ports(struct ahci_uc_priv *uc_priv)
979 {
980 u32 linkmap;
981 int i;
982
983 linkmap = uc_priv->link_port_map;
984
985 for (i = 0; i < uc_priv->n_ports; i++) {
986 if (((linkmap >> i) & 0x01)) {
987 if (ahci_port_start(uc_priv, (u8) i)) {
988 printf("Can not start port %d\n", i);
989 continue;
990 }
991 }
992 }
993
994 return 0;
995 }
996
997 #ifndef CONFIG_DM_SCSI
scsi_low_level_init(int busdevfunc)998 void scsi_low_level_init(int busdevfunc)
999 {
1000 struct ahci_uc_priv *uc_priv;
1001
1002 #ifndef CONFIG_SCSI_AHCI_PLAT
1003 probe_ent = calloc(1, sizeof(struct ahci_uc_priv));
1004 if (!probe_ent) {
1005 printf("%s: No memory for uc_priv\n", __func__);
1006 return;
1007 }
1008 uc_priv = probe_ent;
1009 # if defined(CONFIG_DM_PCI)
1010 struct udevice *dev;
1011 int ret;
1012
1013 ret = dm_pci_bus_find_bdf(busdevfunc, &dev);
1014 if (ret)
1015 return;
1016 ahci_init_one(uc_priv, dev);
1017 # else
1018 ahci_init_one(uc_priv, busdevfunc);
1019 # endif
1020 #else
1021 uc_priv = probe_ent;
1022 #endif
1023
1024 ahci_start_ports(uc_priv);
1025 }
1026 #endif
1027
1028 #ifndef CONFIG_SCSI_AHCI_PLAT
1029 # if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
ahci_init_one_dm(struct udevice * dev)1030 int ahci_init_one_dm(struct udevice *dev)
1031 {
1032 struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
1033
1034 return ahci_init_one(uc_priv, dev);
1035 }
1036 #endif
1037 #endif
1038
ahci_start_ports_dm(struct udevice * dev)1039 int ahci_start_ports_dm(struct udevice *dev)
1040 {
1041 struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
1042
1043 return ahci_start_ports(uc_priv);
1044 }
1045
1046 #ifdef CONFIG_SCSI_AHCI_PLAT
ahci_init_common(struct ahci_uc_priv * uc_priv,void __iomem * base)1047 static int ahci_init_common(struct ahci_uc_priv *uc_priv, void __iomem *base)
1048 {
1049 int rc;
1050
1051 uc_priv->host_flags = ATA_FLAG_SATA
1052 | ATA_FLAG_NO_LEGACY
1053 | ATA_FLAG_MMIO
1054 | ATA_FLAG_PIO_DMA
1055 | ATA_FLAG_NO_ATAPI;
1056 uc_priv->pio_mask = 0x1f;
1057 uc_priv->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
1058
1059 uc_priv->mmio_base = base;
1060
1061 /* initialize adapter */
1062 rc = ahci_host_init(uc_priv);
1063 if (rc)
1064 goto err_out;
1065
1066 ahci_print_info(uc_priv);
1067
1068 rc = ahci_start_ports(uc_priv);
1069
1070 err_out:
1071 return rc;
1072 }
1073
1074 #ifndef CONFIG_DM_SCSI
ahci_init(void __iomem * base)1075 int ahci_init(void __iomem *base)
1076 {
1077 struct ahci_uc_priv *uc_priv;
1078
1079 probe_ent = malloc(sizeof(struct ahci_uc_priv));
1080 if (!probe_ent) {
1081 printf("%s: No memory for uc_priv\n", __func__);
1082 return -ENOMEM;
1083 }
1084
1085 uc_priv = probe_ent;
1086 memset(uc_priv, 0, sizeof(struct ahci_uc_priv));
1087
1088 return ahci_init_common(uc_priv, base);
1089 }
1090 #endif
1091
ahci_init_dm(struct udevice * dev,void __iomem * base)1092 int ahci_init_dm(struct udevice *dev, void __iomem *base)
1093 {
1094 struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
1095
1096 return ahci_init_common(uc_priv, base);
1097 }
1098
scsi_init(void)1099 void __weak scsi_init(void)
1100 {
1101 }
1102
1103 #endif /* CONFIG_SCSI_AHCI_PLAT */
1104
1105 /*
1106 * In the general case of generic rotating media it makes sense to have a
1107 * flush capability. It probably even makes sense in the case of SSDs because
1108 * one cannot always know for sure what kind of internal cache/flush mechanism
1109 * is embodied therein. At first it was planned to invoke this after the last
1110 * write to disk and before rebooting. In practice, knowing, a priori, which
1111 * is the last write is difficult. Because writing to the disk in u-boot is
1112 * very rare, this flush command will be invoked after every block write.
1113 */
ata_io_flush(struct ahci_uc_priv * uc_priv,u8 port)1114 static int ata_io_flush(struct ahci_uc_priv *uc_priv, u8 port)
1115 {
1116 u8 fis[20];
1117 struct ahci_ioports *pp = &(uc_priv->port[port]);
1118 void __iomem *port_mmio = pp->port_mmio;
1119 u32 cmd_fis_len = 5; /* five dwords */
1120
1121 /* Preset the FIS */
1122 memset(fis, 0, 20);
1123 fis[0] = 0x27; /* Host to device FIS. */
1124 fis[1] = 1 << 7; /* Command FIS. */
1125 fis[2] = ATA_CMD_FLUSH_EXT;
1126
1127 memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
1128 ahci_fill_cmd_slot(pp, cmd_fis_len);
1129 ahci_dcache_flush_sata_cmd(pp);
1130 writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
1131
1132 if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
1133 WAIT_MS_FLUSH, 0x1)) {
1134 debug("scsi_ahci: flush command timeout on port %d.\n", port);
1135 return -EIO;
1136 }
1137
1138 return 0;
1139 }
1140
ahci_scsi_bus_reset(struct udevice * dev)1141 static int ahci_scsi_bus_reset(struct udevice *dev)
1142 {
1143 /* Not implemented */
1144
1145 return 0;
1146 }
1147
1148 #ifdef CONFIG_DM_SCSI
ahci_bind_scsi(struct udevice * ahci_dev,struct udevice ** devp)1149 int ahci_bind_scsi(struct udevice *ahci_dev, struct udevice **devp)
1150 {
1151 struct udevice *dev;
1152 int ret;
1153
1154 ret = device_bind_driver(ahci_dev, "ahci_scsi", "ahci_scsi", &dev);
1155 if (ret)
1156 return ret;
1157 *devp = dev;
1158
1159 return 0;
1160 }
1161
ahci_probe_scsi(struct udevice * ahci_dev,ulong base)1162 int ahci_probe_scsi(struct udevice *ahci_dev, ulong base)
1163 {
1164 struct ahci_uc_priv *uc_priv;
1165 struct scsi_plat *uc_plat;
1166 struct udevice *dev;
1167 int ret;
1168
1169 device_find_first_child(ahci_dev, &dev);
1170 if (!dev)
1171 return -ENODEV;
1172 uc_plat = dev_get_uclass_plat(dev);
1173 uc_plat->base = base;
1174 uc_plat->max_lun = 1;
1175 uc_plat->max_id = 2;
1176
1177 uc_priv = dev_get_uclass_priv(ahci_dev);
1178 ret = ahci_init_one(uc_priv, dev);
1179 if (ret)
1180 return ret;
1181 ret = ahci_start_ports(uc_priv);
1182 if (ret)
1183 return ret;
1184
1185 /*
1186 * scsi_scan_dev() scans devices up-to the number of max_id.
1187 * Update max_id if the number of detected ports exceeds max_id.
1188 * This allows SCSI to scan all detected ports.
1189 */
1190 uc_plat->max_id = max_t(unsigned long, uc_priv->n_ports,
1191 uc_plat->max_id);
1192 /* If port count is less than max_id, update max_id */
1193 if (uc_priv->n_ports < uc_plat->max_id)
1194 uc_plat->max_id = uc_priv->n_ports;
1195
1196 return 0;
1197 }
1198
1199 #ifdef CONFIG_DM_PCI
ahci_probe_scsi_pci(struct udevice * ahci_dev)1200 int ahci_probe_scsi_pci(struct udevice *ahci_dev)
1201 {
1202 ulong base;
1203 u16 vendor, device;
1204
1205 base = (ulong)dm_pci_map_bar(ahci_dev, PCI_BASE_ADDRESS_5,
1206 PCI_REGION_MEM);
1207
1208 /*
1209 * Note:
1210 * Right now, we have only one quirk here, which is not enough to
1211 * introduce a new Kconfig option to select this. Once we have more
1212 * quirks in this AHCI code, we should add a Kconfig option for
1213 * this though.
1214 */
1215 dm_pci_read_config16(ahci_dev, PCI_VENDOR_ID, &vendor);
1216 dm_pci_read_config16(ahci_dev, PCI_DEVICE_ID, &device);
1217
1218 if (vendor == PCI_VENDOR_ID_CAVIUM &&
1219 device == PCI_DEVICE_ID_CAVIUM_SATA)
1220 base = (uintptr_t)dm_pci_map_bar(ahci_dev, PCI_BASE_ADDRESS_0,
1221 PCI_REGION_MEM);
1222 return ahci_probe_scsi(ahci_dev, base);
1223 }
1224 #endif
1225
1226 struct scsi_ops scsi_ops = {
1227 .exec = ahci_scsi_exec,
1228 .bus_reset = ahci_scsi_bus_reset,
1229 };
1230
1231 U_BOOT_DRIVER(ahci_scsi) = {
1232 .name = "ahci_scsi",
1233 .id = UCLASS_SCSI,
1234 .ops = &scsi_ops,
1235 };
1236 #else
scsi_exec(struct udevice * dev,struct scsi_cmd * pccb)1237 int scsi_exec(struct udevice *dev, struct scsi_cmd *pccb)
1238 {
1239 return ahci_scsi_exec(dev, pccb);
1240 }
1241
scsi_bus_reset(struct udevice * dev)1242 __weak int scsi_bus_reset(struct udevice *dev)
1243 {
1244 return ahci_scsi_bus_reset(dev);
1245
1246 return 0;
1247 }
1248 #endif
1249