1menu "Timer Support"
2
3config TIMER
4	bool "Enable driver model for timer drivers"
5	depends on DM
6	help
7	  Enable driver model for timer access. It uses the same API as
8	  lib/time.c, but now implemented by the uclass. The first timer
9	  will be used. The timer is usually a 32 bits free-running up
10	  counter. There may be no real tick, and no timer interrupt.
11
12config SPL_TIMER
13	bool "Enable driver model for timer drivers in SPL"
14	depends on TIMER && SPL
15	help
16	  Enable support for timer drivers in SPL. These can be used to get
17	  a timer value when in SPL, or perhaps for implementing a delay
18	  function. This enables the drivers in drivers/timer as part of an
19	  SPL build.
20
21config TPL_TIMER
22	bool "Enable driver model for timer drivers in TPL"
23	depends on TIMER && TPL
24	help
25	  Enable support for timer drivers in TPL. These can be used to get
26	  a timer value when in TPL, or perhaps for implementing a delay
27	  function. This enables the drivers in drivers/timer as part of an
28	  TPL build.
29
30config TIMER_EARLY
31	bool "Allow timer to be used early in U-Boot"
32	depends on TIMER
33	# initr_bootstage() requires a timer and is called before initr_dm()
34	# so only the early timer is available
35	default y if X86 && BOOTSTAGE
36	help
37	  In some cases the timer must be accessible before driver model is
38	  active. Examples include when using CONFIG_TRACE to trace U-Boot's
39	  execution before driver model is set up. Enable this option to
40	  use an early timer. These functions must be supported by your timer
41	  driver: timer_early_get_count() and timer_early_get_rate().
42
43config AG101P_TIMER
44	bool "AG101P timer support"
45	depends on TIMER && NDS32
46	help
47	  Select this to enable a timer for AG01P devices.
48
49config ALTERA_TIMER
50	bool "Altera timer support"
51	depends on TIMER
52	help
53	  Select this to enable a timer for Altera devices. Please find
54	  details on the "Embedded Peripherals IP User Guide" of Altera.
55
56config ANDES_PLMT_TIMER
57	bool
58	depends on RISCV_MMODE || SPL_RISCV_MMODE
59	help
60	  The Andes PLMT block holds memory-mapped mtime register
61	  associated with timer tick.
62
63config ARC_TIMER
64	bool "ARC timer support"
65	depends on TIMER && ARC && CLK
66	help
67	  Select this to enable built-in ARC timers.
68	  ARC cores may have up to 2 built-in timers: timer0 and timer1,
69	  usually at least one of them exists. Either of them is supported
70	  in U-Boot.
71
72config AST_TIMER
73	bool "Aspeed ast2400/ast2500 timer support"
74	depends on TIMER
75	default y if ARCH_ASPEED
76	help
77	  Select this to enable timer for Aspeed ast2400/ast2500 devices.
78	  This is a simple sys timer driver, it is compatible with lib/time.c,
79	  but does not support any interrupts. Even though SoC has 8 hardware
80	  counters, they are all treated as a single device by this driver.
81	  This is mostly because they all share several registers which
82	  makes it difficult to completely separate them.
83
84config ATCPIT100_TIMER
85	bool "ATCPIT100 timer support"
86	depends on TIMER
87	help
88	  Select this to enable a ATCPIT100 timer which will be embedded
89	  in AE3XX, AE250 boards.
90
91config ATMEL_PIT_TIMER
92	bool "Atmel periodic interval timer support"
93	depends on TIMER
94	help
95	  Select this to enable a periodic interval timer for Atmel devices,
96	  it is designed to offer maximum accuracy and efficient management,
97	  even for systems with long response time.
98
99config CADENCE_TTC_TIMER
100	bool "Cadence TTC (Triple Timer Counter)"
101	depends on TIMER
102	help
103	  Enables support for the cadence ttc driver. This driver is present
104	  on Xilinx Zynq and ZynqMP SoCs.
105
106config DESIGNWARE_APB_TIMER
107	bool "Designware APB Timer"
108	depends on TIMER
109	help
110	  Enables support for the Designware APB Timer driver. This timer is
111	  present on Altera SoCFPGA SoCs.
112
113config MPC83XX_TIMER
114	bool "MPC83xx timer support"
115	depends on TIMER
116	help
117	  Select this to enable support for the timer found on
118	  devices based on the MPC83xx family of SoCs.
119
120config RENESAS_OSTM_TIMER
121	bool "Renesas RZ/A1 R7S72100 OSTM Timer"
122	depends on TIMER
123	help
124	  Enables support for the Renesas OSTM Timer driver.
125	  This timer is present on Renesas RZ/A1 R7S72100 SoCs.
126
127config X86_TSC_TIMER_EARLY_FREQ
128	int "x86 TSC timer frequency in MHz when used as the early timer"
129	depends on X86_TSC_TIMER
130	default 1000
131	help
132	  Sets the estimated CPU frequency in MHz when TSC is used as the
133	  early timer and the frequency can neither be calibrated via some
134	  hardware ways, nor got from device tree at the time when device
135	  tree is not available yet.
136
137config NOMADIK_MTU_TIMER
138	bool "Nomadik MTU Timer"
139	depends on TIMER
140	help
141	  Enables support for the Nomadik Multi Timer Unit (MTU),
142	  used in ST-Ericsson Ux500 SoCs.
143	  The MTU provides 4 decrementing free-running timers.
144	  At the moment, only the first timer is used by the driver.
145
146config OMAP_TIMER
147	bool "Omap timer support"
148	depends on TIMER
149	help
150	  Select this to enable an timer for Omap devices.
151
152config RISCV_TIMER
153	bool "RISC-V timer support"
154	depends on TIMER && RISCV
155	help
156	  Select this to enable support for a generic RISC-V S-Mode timer
157	  driver.
158
159config ROCKCHIP_TIMER
160	bool "Rockchip timer support"
161	depends on TIMER
162	help
163	  Select this to enable support for the timer found on
164	  Rockchip devices.
165
166config SANDBOX_TIMER
167	bool "Sandbox timer support"
168	depends on SANDBOX && TIMER
169	help
170	  Select this to enable an emulated timer for sandbox. It gets
171	  time from host os.
172
173config STI_TIMER
174	bool "STi timer support"
175	depends on TIMER
176	default y if ARCH_STI
177	help
178	  Select this to enable a timer for STi devices.
179
180config STM32_TIMER
181	bool "STM32 timer support"
182	depends on TIMER
183	help
184	  Select this to enable support for the timer found on
185	  STM32 devices.
186
187config X86_TSC_TIMER
188	bool "x86 Time-Stamp Counter (TSC) timer support"
189	depends on TIMER && X86
190	help
191	  Select this to enable Time-Stamp Counter (TSC) timer for x86.
192
193config X86_TSC_READ_BASE
194	bool "Read the TSC timer base on start-up"
195	depends on X86_TSC_TIMER
196	help
197	  On x86 platforms the TSC timer tick starts at the value 0 on reset.
198	  This it makes no sense to read the timer on boot and use that as the
199	  base, since we will miss some time taken to load U-Boot, etc. This
200	  delay is controlled by the SoC and we cannot reduce it, but for
201	  bootstage we want to record the time since reset as accurately as
202	  possible.
203
204	  The only exception is when U-Boot is used as a secondary bootloader,
205	  where this option should be enabled.
206
207config TPL_X86_TSC_TIMER_NATIVE
208	bool "x86 TSC timer uses native calibration"
209	depends on TPL && X86_TSC_TIMER
210	help
211	  Selects native timer calibration for TPL and don't include the other
212	  methods in the code. This helps to reduce code size in TPL and works
213	  on fairly modern Intel chips. Code-size reductions is about 700
214	  bytes.
215
216config MTK_TIMER
217	bool "MediaTek timer support"
218	depends on TIMER
219	help
220	  Select this to enable support for the timer found on
221	  MediaTek devices.
222
223config MCHP_PIT64B_TIMER
224	bool "Microchip 64-bit periodic interval timer support"
225	depends on TIMER
226	help
227	  Select this to enable support for Microchip 64-bit periodic
228	  interval timer.
229
230config IMX_GPT_TIMER
231	bool "NXP i.MX GPT timer support"
232	depends on TIMER
233	help
234	  Select this to enable support for the timer found on
235	  NXP i.MX devices.
236
237endmenu
238