1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8	model = "Globalscale Technologies Dreamplug";
9	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11	memory {
12		device_type = "memory";
13		reg = <0x00000000 0x20000000>;
14	};
15
16	chosen {
17		bootargs = "console=ttyS0,115200n8 earlyprintk";
18		stdout-path = &uart0;
19	};
20
21	aliases {
22		spi0 = &spi0;
23	};
24
25	ocp@f1000000 {
26		pinctrl: pin-controller@10000 {
27			pmx_led_bluetooth: pmx-led-bluetooth {
28				marvell,pins = "mpp47";
29				marvell,function = "gpio";
30			};
31			pmx_led_wifi: pmx-led-wifi {
32				marvell,pins = "mpp48";
33				marvell,function = "gpio";
34			};
35			pmx_led_wifi_ap: pmx-led-wifi-ap {
36				marvell,pins = "mpp49";
37				marvell,function = "gpio";
38			};
39		};
40		serial@12000 {
41			status = "ok";
42		};
43
44		spi@10600 {
45			status = "okay";
46
47			m25p40@0 {
48				#address-cells = <1>;
49				#size-cells = <1>;
50				compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
51				reg = <0>;
52				spi-max-frequency = <50000000>;
53				mode = <0>;
54
55				partition@0 {
56					reg = <0x0 0x80000>;
57					label = "u-boot";
58				};
59
60				partition@100000 {
61					reg = <0x100000 0x10000>;
62					label = "u-boot env";
63				};
64
65				partition@180000 {
66					reg = <0x180000 0x10000>;
67					label = "dtb";
68				};
69			};
70		};
71
72		sata@80000 {
73			status = "okay";
74			nr-ports = <1>;
75		};
76
77		mvsdio@90000 {
78			pinctrl-0 = <&pmx_sdio>;
79			pinctrl-names = "default";
80			status = "okay";
81			/* No CD or WP GPIOs */
82			broken-cd;
83		};
84	};
85
86	gpio-leds {
87		compatible = "gpio-leds";
88		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
89			     &pmx_led_wifi_ap >;
90		pinctrl-names = "default";
91
92		bluetooth {
93			label = "dreamplug:blue:bluetooth";
94			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
95		};
96		wifi {
97			label = "dreamplug:green:wifi";
98			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
99		};
100		wifi-ap {
101			label = "dreamplug:green:wifi_ap";
102			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
103		};
104	};
105};
106
107&mdio {
108	status = "okay";
109
110	ethphy0: ethernet-phy@0 {
111		reg = <0>;
112	};
113
114	ethphy1: ethernet-phy@1 {
115		reg = <1>;
116	};
117};
118
119&eth0 {
120	status = "okay";
121	ethernet0-port@0 {
122		phy-handle = <&ethphy0>;
123	};
124};
125
126&eth1 {
127	status = "okay";
128	ethernet1-port@0 {
129		phy-handle = <&ethphy1>;
130	};
131};
132