1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Koelsch board
4 *
5 * Copyright (C) 2013 Renesas Electronics Corporation
6 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2014 Cogent Embedded, Inc.
8 */
9
10/*
11 * SSI-AK4643
12 *
13 * SW1: 1: AK4643
14 *      2: CN22
15 *      3: ADV7511
16 *
17 * This command is required when Playback/Capture
18 *
19 *	amixer set "LINEOUT Mixer DACL" on
20 *	amixer set "DVC Out" 100%
21 *	amixer set "DVC In" 100%
22 *
23 * You can use Mute
24 *
25 *	amixer set "DVC Out Mute" on
26 *	amixer set "DVC In Mute" on
27 *
28 * You can use Volume Ramp
29 *
30 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
31 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32 *	amixer set "DVC Out Ramp" on
33 *	aplay xxx.wav &
34 *	amixer set "DVC Out"  80%  // Volume Down
35 *	amixer set "DVC Out" 100%  // Volume Up
36 */
37
38/dts-v1/;
39#include "r8a7791.dtsi"
40#include <dt-bindings/gpio/gpio.h>
41#include <dt-bindings/input/input.h>
42
43/ {
44	model = "Koelsch";
45	compatible = "renesas,koelsch", "renesas,r8a7791";
46
47	aliases {
48		serial0 = &scif0;
49		serial1 = &scif1;
50		i2c9 = &gpioi2c1;
51		i2c10 = &gpioi2c2;
52		i2c11 = &gpioi2c4;
53		i2c12 = &i2cexio1;
54		i2c13 = &i2chdmi;
55		i2c14 = &i2cexio4;
56	};
57
58	chosen {
59		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
60		stdout-path = "serial0:115200n8";
61	};
62
63	memory@40000000 {
64		device_type = "memory";
65		reg = <0 0x40000000 0 0x40000000>;
66	};
67
68	memory@200000000 {
69		device_type = "memory";
70		reg = <2 0x00000000 0 0x40000000>;
71	};
72
73	lbsc {
74		#address-cells = <1>;
75		#size-cells = <1>;
76	};
77
78	keyboard {
79		compatible = "gpio-keys";
80
81		key-1 {
82			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
83			linux,code = <KEY_1>;
84			label = "SW2-1";
85			wakeup-source;
86			debounce-interval = <20>;
87		};
88		key-2 {
89			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
90			linux,code = <KEY_2>;
91			label = "SW2-2";
92			wakeup-source;
93			debounce-interval = <20>;
94		};
95		key-3 {
96			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
97			linux,code = <KEY_3>;
98			label = "SW2-3";
99			wakeup-source;
100			debounce-interval = <20>;
101		};
102		key-4 {
103			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
104			linux,code = <KEY_4>;
105			label = "SW2-4";
106			wakeup-source;
107			debounce-interval = <20>;
108		};
109		key-a {
110			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
111			linux,code = <KEY_A>;
112			label = "SW30";
113			wakeup-source;
114			debounce-interval = <20>;
115		};
116		key-b {
117			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
118			linux,code = <KEY_B>;
119			label = "SW31";
120			wakeup-source;
121			debounce-interval = <20>;
122		};
123		key-c {
124			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
125			linux,code = <KEY_C>;
126			label = "SW32";
127			wakeup-source;
128			debounce-interval = <20>;
129		};
130		key-d {
131			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
132			linux,code = <KEY_D>;
133			label = "SW33";
134			wakeup-source;
135			debounce-interval = <20>;
136		};
137		key-e {
138			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
139			linux,code = <KEY_E>;
140			label = "SW34";
141			wakeup-source;
142			debounce-interval = <20>;
143		};
144		key-f {
145			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
146			linux,code = <KEY_F>;
147			label = "SW35";
148			wakeup-source;
149			debounce-interval = <20>;
150		};
151		key-g {
152			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
153			linux,code = <KEY_G>;
154			label = "SW36";
155			wakeup-source;
156			debounce-interval = <20>;
157		};
158	};
159
160	leds {
161		compatible = "gpio-leds";
162		led6 {
163			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
164			label = "LED6";
165		};
166		led7 {
167			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
168			label = "LED7";
169		};
170		led8 {
171			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
172			label = "LED8";
173		};
174	};
175
176	vcc_sdhi0: regulator-vcc-sdhi0 {
177		compatible = "regulator-fixed";
178
179		regulator-name = "SDHI0 Vcc";
180		regulator-min-microvolt = <3300000>;
181		regulator-max-microvolt = <3300000>;
182
183		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
184		enable-active-high;
185	};
186
187	vccq_sdhi0: regulator-vccq-sdhi0 {
188		compatible = "regulator-gpio";
189
190		regulator-name = "SDHI0 VccQ";
191		regulator-min-microvolt = <1800000>;
192		regulator-max-microvolt = <3300000>;
193
194		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
195		gpios-states = <1>;
196		states = <3300000 1>, <1800000 0>;
197	};
198
199	vcc_sdhi1: regulator-vcc-sdhi1 {
200		compatible = "regulator-fixed";
201
202		regulator-name = "SDHI1 Vcc";
203		regulator-min-microvolt = <3300000>;
204		regulator-max-microvolt = <3300000>;
205
206		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
207		enable-active-high;
208	};
209
210	vccq_sdhi1: regulator-vccq-sdhi1 {
211		compatible = "regulator-gpio";
212
213		regulator-name = "SDHI1 VccQ";
214		regulator-min-microvolt = <1800000>;
215		regulator-max-microvolt = <3300000>;
216
217		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
218		gpios-states = <1>;
219		states = <3300000 1>, <1800000 0>;
220	};
221
222	vcc_sdhi2: regulator-vcc-sdhi2 {
223		compatible = "regulator-fixed";
224
225		regulator-name = "SDHI2 Vcc";
226		regulator-min-microvolt = <3300000>;
227		regulator-max-microvolt = <3300000>;
228
229		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
230		enable-active-high;
231	};
232
233	vccq_sdhi2: regulator-vccq-sdhi2 {
234		compatible = "regulator-gpio";
235
236		regulator-name = "SDHI2 VccQ";
237		regulator-min-microvolt = <1800000>;
238		regulator-max-microvolt = <3300000>;
239
240		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
241		gpios-states = <1>;
242		states = <3300000 1>, <1800000 0>;
243	};
244
245	audio_clock: audio_clock {
246		compatible = "fixed-clock";
247		#clock-cells = <0>;
248		clock-frequency = <11289600>;
249	};
250
251	rsnd_ak4643: sound {
252		compatible = "simple-audio-card";
253
254		simple-audio-card,format = "left_j";
255		simple-audio-card,bitclock-master = <&sndcodec>;
256		simple-audio-card,frame-master = <&sndcodec>;
257
258		sndcpu: simple-audio-card,cpu {
259			sound-dai = <&rcar_sound>;
260		};
261
262		sndcodec: simple-audio-card,codec {
263			sound-dai = <&ak4643>;
264			clocks = <&audio_clock>;
265		};
266	};
267
268	hdmi-in {
269		compatible = "hdmi-connector";
270		type = "a";
271
272		port {
273			hdmi_con_in: endpoint {
274				remote-endpoint = <&adv7612_in>;
275			};
276		};
277	};
278
279	cec_clock: cec-clock {
280		compatible = "fixed-clock";
281		#clock-cells = <0>;
282		clock-frequency = <12000000>;
283	};
284
285	hdmi-out {
286		compatible = "hdmi-connector";
287		type = "a";
288
289		port {
290			hdmi_con_out: endpoint {
291				remote-endpoint = <&adv7511_out>;
292			};
293		};
294	};
295
296	x2_clk: x2-clock {
297		compatible = "fixed-clock";
298		#clock-cells = <0>;
299		clock-frequency = <74250000>;
300	};
301
302	x13_clk: x13-clock {
303		compatible = "fixed-clock";
304		#clock-cells = <0>;
305		clock-frequency = <148500000>;
306	};
307
308	gpioi2c1: i2c-9 {
309		#address-cells = <1>;
310		#size-cells = <0>;
311		compatible = "i2c-gpio";
312		status = "disabled";
313		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
314		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
315		i2c-gpio,delay-us = <5>;
316	};
317
318	gpioi2c2: i2c-10 {
319		#address-cells = <1>;
320		#size-cells = <0>;
321		compatible = "i2c-gpio";
322		status = "disabled";
323		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
324		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
325		i2c-gpio,delay-us = <5>;
326	};
327
328	gpioi2c4: i2c-11 {
329		#address-cells = <1>;
330		#size-cells = <0>;
331		compatible = "i2c-gpio";
332		status = "disabled";
333		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
334		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
335		i2c-gpio,delay-us = <5>;
336	};
337
338	/*
339	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
340	 * A fallback to GPIO is provided.
341	 */
342	i2cexio1: i2c-12 {
343		compatible = "i2c-demux-pinctrl";
344		i2c-parent = <&i2c1>, <&gpioi2c1>;
345		i2c-bus-name = "i2c-exio1";
346		#address-cells = <1>;
347		#size-cells = <0>;
348	};
349
350	/*
351	 * A fallback to GPIO is provided for I2C2.
352	 */
353	i2chdmi: i2c-13 {
354		compatible = "i2c-demux-pinctrl";
355		i2c-parent = <&i2c2>, <&gpioi2c2>;
356		i2c-bus-name = "i2c-hdmi";
357		#address-cells = <1>;
358		#size-cells = <0>;
359
360		ak4643: codec@12 {
361			compatible = "asahi-kasei,ak4643";
362			#sound-dai-cells = <0>;
363			reg = <0x12>;
364		};
365
366		composite-in@20 {
367			compatible = "adi,adv7180";
368			reg = <0x20>;
369			remote = <&vin1>;
370
371			port {
372				adv7180: endpoint {
373					bus-width = <8>;
374					remote-endpoint = <&vin1ep>;
375				};
376			};
377		};
378
379		hdmi@39 {
380			compatible = "adi,adv7511w";
381			reg = <0x39>;
382			interrupt-parent = <&gpio3>;
383			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
384			clocks = <&cec_clock>;
385			clock-names = "cec";
386
387			adi,input-depth = <8>;
388			adi,input-colorspace = "rgb";
389			adi,input-clock = "1x";
390			adi,input-style = <1>;
391			adi,input-justification = "evenly";
392
393			ports {
394				#address-cells = <1>;
395				#size-cells = <0>;
396
397				port@0 {
398					reg = <0>;
399					adv7511_in: endpoint {
400						remote-endpoint = <&du_out_rgb>;
401					};
402				};
403
404				port@1 {
405					reg = <1>;
406					adv7511_out: endpoint {
407						remote-endpoint = <&hdmi_con_out>;
408					};
409				};
410			};
411		};
412
413		hdmi-in@4c {
414			compatible = "adi,adv7612";
415			reg = <0x4c>;
416			interrupt-parent = <&gpio4>;
417			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
418			default-input = <0>;
419
420			ports {
421				#address-cells = <1>;
422				#size-cells = <0>;
423
424				port@0 {
425					reg = <0>;
426					adv7612_in: endpoint {
427						remote-endpoint = <&hdmi_con_in>;
428					};
429				};
430
431				port@2 {
432					reg = <2>;
433					adv7612_out: endpoint {
434						remote-endpoint = <&vin0ep2>;
435					};
436				};
437			};
438		};
439
440		eeprom@50 {
441			compatible = "renesas,r1ex24002", "atmel,24c02";
442			reg = <0x50>;
443			pagesize = <16>;
444		};
445	};
446
447	/*
448	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
449	 * A fallback to GPIO is provided.
450	 */
451	i2cexio4: i2c-14 {
452		compatible = "i2c-demux-pinctrl";
453		i2c-parent = <&i2c4>, <&gpioi2c4>;
454		i2c-bus-name = "i2c-exio4";
455		#address-cells = <1>;
456		#size-cells = <0>;
457	};
458};
459
460&du {
461	pinctrl-0 = <&du_pins>;
462	pinctrl-names = "default";
463	status = "okay";
464
465	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
466		 <&x13_clk>, <&x2_clk>;
467	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
468
469	ports {
470		port@0 {
471			endpoint {
472				remote-endpoint = <&adv7511_in>;
473			};
474		};
475	};
476};
477
478&lvds0 {
479	ports {
480		port@1 {
481			lvds_connector: endpoint {
482			};
483		};
484	};
485};
486
487&extal_clk {
488	clock-frequency = <20000000>;
489};
490
491&pfc {
492	pinctrl-0 = <&scif_clk_pins>;
493	pinctrl-names = "default";
494
495	i2c1_pins: i2c1 {
496		groups = "i2c1";
497		function = "i2c1";
498	};
499
500	i2c2_pins: i2c2 {
501		groups = "i2c2";
502		function = "i2c2";
503	};
504
505	i2c4_pins: i2c4 {
506		groups = "i2c4_c";
507		function = "i2c4";
508	};
509
510	du_pins: du {
511		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
512		function = "du";
513	};
514
515	scif0_pins: scif0 {
516		groups = "scif0_data_d";
517		function = "scif0";
518	};
519
520	scif1_pins: scif1 {
521		groups = "scif1_data_d";
522		function = "scif1";
523	};
524
525	scif_clk_pins: scif_clk {
526		groups = "scif_clk";
527		function = "scif_clk";
528	};
529
530	ether_pins: ether {
531		groups = "eth_link", "eth_mdio", "eth_rmii";
532		function = "eth";
533	};
534
535	phy1_pins: phy1 {
536		groups = "intc_irq0";
537		function = "intc";
538	};
539
540	pmic_irq_pins: pmicirq {
541		groups = "intc_irq2";
542		function = "intc";
543	};
544
545	sdhi0_pins: sd0 {
546		groups = "sdhi0_data4", "sdhi0_ctrl";
547		function = "sdhi0";
548		power-source = <3300>;
549	};
550
551	sdhi0_pins_uhs: sd0_uhs {
552		groups = "sdhi0_data4", "sdhi0_ctrl";
553		function = "sdhi0";
554		power-source = <1800>;
555	};
556
557	sdhi1_pins: sd1 {
558		groups = "sdhi1_data4", "sdhi1_ctrl";
559		function = "sdhi1";
560		power-source = <3300>;
561	};
562
563	sdhi1_pins_uhs: sd1_uhs {
564		groups = "sdhi1_data4", "sdhi1_ctrl";
565		function = "sdhi1";
566		power-source = <1800>;
567	};
568
569	sdhi2_pins: sd2 {
570		groups = "sdhi2_data4", "sdhi2_ctrl";
571		function = "sdhi2";
572		power-source = <3300>;
573	};
574
575	sdhi2_pins_uhs: sd2_uhs {
576		groups = "sdhi2_data4", "sdhi2_ctrl";
577		function = "sdhi2";
578		power-source = <1800>;
579	};
580
581	qspi_pins: qspi {
582		groups = "qspi_ctrl", "qspi_data4";
583		function = "qspi";
584	};
585
586	msiof0_pins: msiof0 {
587		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
588				 "msiof0_tx";
589		function = "msiof0";
590	};
591
592	usb0_pins: usb0 {
593		groups = "usb0";
594		function = "usb0";
595	};
596
597	usb1_pins: usb1 {
598		groups = "usb1";
599		function = "usb1";
600	};
601
602	vin0_pins: vin0 {
603		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
604		function = "vin0";
605	};
606
607	vin1_pins: vin1 {
608		groups = "vin1_data8", "vin1_clk";
609		function = "vin1";
610	};
611
612	sound_pins: sound {
613		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
614		function = "ssi";
615	};
616
617	sound_clk_pins: sound_clk {
618		groups = "audio_clk_a";
619		function = "audio_clk";
620	};
621};
622
623&ether {
624	pinctrl-0 = <&ether_pins &phy1_pins>;
625	pinctrl-names = "default";
626
627	phy-handle = <&phy1>;
628	renesas,ether-link-active-low;
629	status = "okay";
630
631	phy1: ethernet-phy@1 {
632		reg = <1>;
633		interrupt-parent = <&irqc0>;
634		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
635		micrel,led-mode = <1>;
636	};
637};
638
639&cmt0 {
640	status = "okay";
641};
642
643&rwdt {
644	timeout-sec = <60>;
645	status = "okay";
646};
647
648&sata0 {
649	status = "okay";
650};
651
652&scif0 {
653	pinctrl-0 = <&scif0_pins>;
654	pinctrl-names = "default";
655
656	status = "okay";
657};
658
659&scif1 {
660	pinctrl-0 = <&scif1_pins>;
661	pinctrl-names = "default";
662
663	status = "okay";
664};
665
666&scif_clk {
667	clock-frequency = <14745600>;
668};
669
670&sdhi0 {
671	pinctrl-0 = <&sdhi0_pins>;
672	pinctrl-1 = <&sdhi0_pins_uhs>;
673	pinctrl-names = "default", "state_uhs";
674
675	vmmc-supply = <&vcc_sdhi0>;
676	vqmmc-supply = <&vccq_sdhi0>;
677	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
678	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
679	sd-uhs-sdr50;
680	sd-uhs-sdr104;
681	status = "okay";
682};
683
684&sdhi1 {
685	pinctrl-0 = <&sdhi1_pins>;
686	pinctrl-1 = <&sdhi1_pins_uhs>;
687	pinctrl-names = "default", "state_uhs";
688
689	vmmc-supply = <&vcc_sdhi1>;
690	vqmmc-supply = <&vccq_sdhi1>;
691	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
692	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
693	sd-uhs-sdr50;
694	status = "okay";
695};
696
697&sdhi2 {
698	pinctrl-0 = <&sdhi2_pins>;
699	pinctrl-1 = <&sdhi2_pins_uhs>;
700	pinctrl-names = "default", "state_uhs";
701
702	vmmc-supply = <&vcc_sdhi2>;
703	vqmmc-supply = <&vccq_sdhi2>;
704	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
705	sd-uhs-sdr50;
706	status = "okay";
707};
708
709&qspi {
710	pinctrl-0 = <&qspi_pins>;
711	pinctrl-names = "default";
712
713	status = "okay";
714
715	flash: flash@0 {
716		compatible = "spansion,s25fl512s", "jedec,spi-nor";
717		reg = <0>;
718		spi-max-frequency = <30000000>;
719		spi-tx-bus-width = <4>;
720		spi-rx-bus-width = <4>;
721		spi-cpha;
722		spi-cpol;
723		m25p,fast-read;
724
725		partitions {
726			compatible = "fixed-partitions";
727			#address-cells = <1>;
728			#size-cells = <1>;
729
730			partition@0 {
731				label = "loader";
732				reg = <0x00000000 0x00080000>;
733				read-only;
734			};
735			partition@80000 {
736				label = "user";
737				reg = <0x00080000 0x00580000>;
738				read-only;
739			};
740			partition@600000 {
741				label = "flash";
742				reg = <0x00600000 0x03a00000>;
743			};
744		};
745	};
746};
747
748&msiof0 {
749	pinctrl-0 = <&msiof0_pins>;
750	pinctrl-names = "default";
751
752	status = "okay";
753
754	pmic: pmic@0 {
755		compatible = "renesas,r2a11302ft";
756		reg = <0>;
757		spi-max-frequency = <6000000>;
758		spi-cpol;
759		spi-cpha;
760	};
761};
762
763&i2c1 {
764	pinctrl-0 = <&i2c1_pins>;
765	pinctrl-names = "i2c-exio1";
766};
767
768&i2c2 {
769	pinctrl-0 = <&i2c2_pins>;
770	pinctrl-names = "i2c-hdmi";
771
772	clock-frequency = <100000>;
773};
774
775&i2c4 {
776	pinctrl-0 = <&i2c4_pins>;
777	pinctrl-names = "i2c-exio4";
778};
779
780&i2c6 {
781	pinctrl-names = "default";
782	pinctrl-0 = <&pmic_irq_pins>;
783	status = "okay";
784	clock-frequency = <100000>;
785
786	pmic@58 {
787		compatible = "dlg,da9063";
788		reg = <0x58>;
789		interrupt-parent = <&irqc0>;
790		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
791		interrupt-controller;
792
793		rtc {
794			compatible = "dlg,da9063-rtc";
795		};
796
797		wdt {
798			compatible = "dlg,da9063-watchdog";
799		};
800	};
801
802	vdd_dvfs: regulator@68 {
803		compatible = "dlg,da9210";
804		reg = <0x68>;
805		interrupt-parent = <&irqc0>;
806		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
807
808		regulator-min-microvolt = <1000000>;
809		regulator-max-microvolt = <1000000>;
810		regulator-boot-on;
811		regulator-always-on;
812	};
813};
814
815&pci0 {
816	status = "okay";
817	pinctrl-0 = <&usb0_pins>;
818	pinctrl-names = "default";
819};
820
821&pci1 {
822	status = "okay";
823	pinctrl-0 = <&usb1_pins>;
824	pinctrl-names = "default";
825};
826
827&hsusb {
828	status = "okay";
829	pinctrl-0 = <&usb0_pins>;
830	pinctrl-names = "default";
831	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
832};
833
834&usbphy {
835	status = "okay";
836};
837
838&pcie_bus_clk {
839	clock-frequency = <100000000>;
840};
841
842&pciec {
843	status = "okay";
844};
845
846&cpu0 {
847	cpu0-supply = <&vdd_dvfs>;
848};
849
850/* HDMI video input */
851&vin0 {
852	status = "okay";
853	pinctrl-0 = <&vin0_pins>;
854	pinctrl-names = "default";
855
856	port {
857		vin0ep2: endpoint {
858			remote-endpoint = <&adv7612_out>;
859			bus-width = <24>;
860			hsync-active = <0>;
861			vsync-active = <0>;
862			pclk-sample = <1>;
863			data-active = <1>;
864		};
865	};
866};
867
868/* composite video input */
869&vin1 {
870	status = "okay";
871	pinctrl-0 = <&vin1_pins>;
872	pinctrl-names = "default";
873
874	port {
875		vin1ep: endpoint {
876			remote-endpoint = <&adv7180>;
877			bus-width = <8>;
878		};
879	};
880};
881
882&rcar_sound {
883	pinctrl-0 = <&sound_pins &sound_clk_pins>;
884	pinctrl-names = "default";
885
886	/* Single DAI */
887	#sound-dai-cells = <0>;
888
889	status = "okay";
890
891	rcar_sound,dai {
892		dai0 {
893			playback = <&ssi0 &src2 &dvc0>;
894			capture  = <&ssi1 &src3 &dvc1>;
895		};
896	};
897};
898
899&ssi1 {
900	shared-pin;
901};
902