1/*
2 * ethernut5.dts - Device Tree file for Ethernut 5 board
3 *
4 * Copyright (C) 2012 egnite GmbH <info@egnite.de>
5 *
6 * Licensed under GPLv2.
7 */
8/dts-v1/;
9#include "at91sam9xe.dtsi"
10
11/ {
12	model = "Ethernut 5";
13	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
14
15	chosen {
16		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
17	};
18
19	memory {
20		reg = <0x20000000 0x08000000>;
21	};
22
23	clocks {
24		slow_xtal {
25			clock-frequency = <32768>;
26		};
27
28		main_xtal {
29			clock-frequency = <18432000>;
30		};
31	};
32
33	ahb {
34		apb {
35			dbgu: serial@fffff200 {
36				status = "okay";
37			};
38
39			usart0: serial@fffb0000 {
40				status = "okay";
41			};
42
43			usart1: serial@fffb4000 {
44				status = "okay";
45			};
46
47			macb0: ethernet@fffc4000 {
48				phy-mode = "rmii";
49				status = "okay";
50			};
51
52			usb1: gadget@fffa4000 {
53				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
54				status = "okay";
55			};
56		};
57
58		nand0: nand@40000000 {
59			nand-bus-width = <8>;
60			nand-ecc-mode = "soft";
61			nand-on-flash-bbt;
62			status = "okay";
63
64			gpios = <0
65				 &pioC 14 GPIO_ACTIVE_HIGH
66				 0
67				>;
68
69			root@0 {
70				label = "root";
71				reg = <0x0 0x08000000>;
72			};
73
74			data@20000 {
75				label = "data";
76				reg = <0x08000000 0x38000000>;
77			};
78		};
79
80		usb0: ohci@00500000 {
81			num-ports = <2>;
82			status = "okay";
83		};
84	};
85
86	i2c-gpio-0 {
87		#address-cells = <1>;
88		#size-cells = <0>;
89		status = "okay";
90
91		pcf8563@50 {
92			compatible = "nxp,pcf8563";
93			reg = <0x51>;
94		};
95	};
96};
97