1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 */
5/dts-v1/;
6
7#include "omap5-board-common.dtsi"
8
9/ {
10	model = "TI OMAP5 uEVM board";
11	compatible = "ti,omap5-uevm", "ti,omap5";
12
13	memory@80000000 {
14		device_type = "memory";
15		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
16	};
17
18	aliases {
19		ethernet = &ethernet;
20	};
21
22	leds {
23		compatible = "gpio-leds";
24		led1 {
25			label = "omap5:blue:usr1";
26			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
27			linux,default-trigger = "heartbeat";
28			default-state = "off";
29		};
30	};
31
32	evm_keys {
33		compatible = "gpio-keys";
34
35		pinctrl-names = "default";
36		pinctrl-0 = <&evm_keys_pins>;
37
38		#address-cells = <7>;
39		#size-cells = <0>;
40
41		btn1 {
42			label = "BTN1";
43			linux,code = <169>;
44			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
45			wakeup-source;
46			autorepeat;
47			debounce-interval = <50>;
48		};
49	};
50
51	evm_leds {
52		compatible = "gpio-leds";
53
54		led1 {
55			label = "omap5:red:led";
56			gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
57			linux,default-trigger = "mmc0";
58			default-state = "off";
59		};
60
61		led2 {
62			label = "omap5:green:led";
63			gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
64			linux,default-trigger = "mmc1";
65			default-state = "off";
66		};
67
68		led3 {
69			label = "omap5:blue:led";
70			gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
71			linux,default-trigger = "mmc2";
72			default-state = "off";
73		};
74
75		led4 {
76			label = "omap5:green:led1";
77			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
78			linux,default-trigger = "heartbeat";
79			default-state = "off";
80		};
81
82		led5 {
83			label = "omap5:green:led2";
84			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
85			linux,default-trigger = "default-on";
86			default-state = "off";
87		};
88
89		led6 {
90			label = "omap5:green:led3";
91			gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
92			linux,default-trigger = "heartbeat";
93			default-state = "off";
94		};
95
96		led7 {
97			label = "omap5:green:led4";
98			gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
99			linux,default-trigger = "default-on";
100			default-state = "off";
101		};
102
103		led8 {
104			label = "omap5:green:led5";
105			gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
106			linux,default-trigger = "heartbeat";
107			default-state = "off";
108		};
109	};
110};
111
112&hdmi {
113	vdda-supply = <&ldo4_reg>;
114};
115
116&i2c1 {
117	eeprom@50 {
118		compatible = "atmel,24c02";
119		reg = <0x50>;
120	};
121};
122
123&i2c5 {
124	pinctrl-names = "default";
125	pinctrl-0 = <&i2c5_pins>;
126
127	clock-frequency = <400000>;
128
129	gpio9: gpio@22 {
130		compatible = "ti,tca6424";
131		reg = <0x22>;
132		gpio-controller;
133		#gpio-cells = <2>;
134	};
135};
136
137&mmc1 {
138	pinctrl-names = "default";
139	pinctrl-0 = <&mmc1_pins>;
140
141	cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>;	/* gpio5_152 */
142};
143
144&omap5_pmx_core {
145	evm_keys_pins: pinmux_evm_keys_gpio_pins {
146		pinctrl-single,pins = <
147			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
148		>;
149	};
150
151	i2c5_pins: pinmux_i2c5_pins {
152		pinctrl-single,pins = <
153			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
154			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
155		>;
156	};
157
158	mmc1_pins: pinmux_mmc1_pins {
159		pinctrl-single,pins = <
160			OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio5_152 */
161		>;
162	};
163};
164
165&tpd12s015 {
166	gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
167		<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
168		<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
169};
170
171&twl6040 {
172	ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
173};
174
175&twl6040_pins {
176	pinctrl-single,pins = <
177		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
178	>;
179};
180
181&usbhsehci {
182	#address-cells = <1>;
183	#size-cells = <0>;
184
185	hub@2 {
186		compatible = "usb424,3503";
187		reg = <2>;
188		#address-cells = <1>;
189		#size-cells = <0>;
190	};
191
192	ethernet: usbether@3 {
193		compatible = "usb424,9730";
194		reg = <3>;
195	};
196};
197
198&wlcore {
199	compatible = "ti,wl1837";
200};
201