1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2012 Altera Corporation <www.altera.com>
4 */
5
6#include "socfpga_cyclone5.dtsi"
7
8/ {
9	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
10	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
11
12	chosen {
13		bootargs = "earlyprintk";
14		stdout-path = "serial0:115200n8";
15	};
16
17	memory@0 {
18		name = "memory";
19		device_type = "memory";
20		reg = <0x0 0x40000000>; /* 1GB */
21	};
22
23	aliases {
24		/* this allow the ethaddr uboot environmnet variable contents
25		 * to be added to the gmac1 device tree blob.
26		 */
27		ethernet0 = &gmac1;
28	};
29
30	leds {
31		compatible = "gpio-leds";
32		hps0 {
33			label = "hps_led0";
34			gpios = <&portb 15 1>;
35		};
36
37		hps1 {
38			label = "hps_led1";
39			gpios = <&portb 14 1>;
40		};
41
42		hps2 {
43			label = "hps_led2";
44			gpios = <&portb 13 1>;
45		};
46
47		hps3 {
48			label = "hps_led3";
49			gpios = <&portb 12 1>;
50		};
51	};
52
53	regulator_3_3v: 3-3-v-regulator {
54		compatible = "regulator-fixed";
55		regulator-name = "3.3V";
56		regulator-min-microvolt = <3300000>;
57		regulator-max-microvolt = <3300000>;
58	};
59};
60
61&can0 {
62	status = "okay";
63};
64
65&gmac1 {
66	status = "okay";
67	phy-mode = "rgmii";
68
69	rxd0-skew-ps = <0>;
70	rxd1-skew-ps = <0>;
71	rxd2-skew-ps = <0>;
72	rxd3-skew-ps = <0>;
73	txen-skew-ps = <0>;
74	txc-skew-ps = <1560>;
75	rxdv-skew-ps = <0>;
76	rxc-skew-ps = <1200>;
77};
78
79&gpio0 {
80	status = "okay";
81};
82
83&gpio1 {
84	status = "okay";
85};
86
87&gpio2 {
88	status = "okay";
89};
90
91&i2c0 {
92	status = "okay";
93	clock-frequency = <100000>;
94
95	/*
96	 * adjust the falling times to decrease the i2c frequency to 50Khz
97	 * because the LCD module does not work at the standard 100Khz
98	 */
99	i2c-sda-falling-time-ns = <5000>;
100	i2c-scl-falling-time-ns = <5000>;
101
102	eeprom@51 {
103		compatible = "atmel,24c32";
104		reg = <0x51>;
105		pagesize = <32>;
106	};
107
108	rtc@68 {
109		compatible = "dallas,ds1339";
110		reg = <0x68>;
111	};
112};
113
114&mmc0 {
115	cd-gpios = <&portb 18 0>;
116	vmmc-supply = <&regulator_3_3v>;
117	vqmmc-supply = <&regulator_3_3v>;
118	status = "okay";
119};
120
121&qspi {
122	status = "okay";
123
124	flash0: n25q00@0 {
125		#address-cells = <1>;
126		#size-cells = <1>;
127		compatible = "n25q00";
128		reg = <0>;	/* chip select */
129		spi-max-frequency = <100000000>;
130
131		m25p,fast-read;
132		cdns,page-size = <256>;
133		cdns,block-size = <16>;
134		cdns,read-delay = <4>;
135		cdns,tshsl-ns = <50>;
136		cdns,tsd2d-ns = <50>;
137		cdns,tchsh-ns = <4>;
138		cdns,tslch-ns = <4>;
139
140		partition@qspi-boot {
141			/* 8MB for raw data. */
142			label = "Flash 0 Raw Data";
143			reg = <0x0 0x800000>;
144		};
145
146		partition@qspi-rootfs {
147			/* 120MB for jffs2 data. */
148			label = "Flash 0 jffs2 Filesystem";
149			reg = <0x800000 0x7800000>;
150		};
151	};
152};
153
154&spi0 {
155	status = "okay";
156
157	spidev@0 {
158		compatible = "rohm,dh2228fv";
159		reg = <0>;
160		spi-max-frequency = <1000000>;
161	};
162};
163
164&usb1 {
165	status = "okay";
166};
167