1# Makefile.in generated by automake 1.7.6 from Makefile.am. 2# @configure_input@ 3 4# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 5# Free Software Foundation, Inc. 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17srcdir = @srcdir@ 18top_srcdir = @top_srcdir@ 19VPATH = @srcdir@ 20pkgdatadir = $(datadir)/@PACKAGE@ 21pkglibdir = $(libdir)/@PACKAGE@ 22pkgincludedir = $(includedir)/@PACKAGE@ 23top_builddir = .. 24 25am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 26INSTALL = @INSTALL@ 27install_sh_DATA = $(install_sh) -c -m 644 28install_sh_PROGRAM = $(install_sh) -c 29install_sh_SCRIPT = $(install_sh) -c 30INSTALL_HEADER = $(INSTALL_DATA) 31transform = $(program_transform_name) 32NORMAL_INSTALL = : 33PRE_INSTALL = : 34POST_INSTALL = : 35NORMAL_UNINSTALL = : 36PRE_UNINSTALL = : 37POST_UNINSTALL = : 38host_triplet = @host@ 39ACLOCAL = @ACLOCAL@ 40ADNS_LIB = @ADNS_LIB@ 41AMDEP_FALSE = @AMDEP_FALSE@ 42AMDEP_TRUE = @AMDEP_TRUE@ 43AMTAR = @AMTAR@ 44AR = @AR@ 45AUTOCONF = @AUTOCONF@ 46AUTOHEADER = @AUTOHEADER@ 47AUTOMAKE = @AUTOMAKE@ 48AWK = @AWK@ 49BZ_LIB = @BZ_LIB@ 50CC = @CC@ 51CCDEPMODE = @CCDEPMODE@ 52CFLAGS = @CFLAGS@ 53CPP = @CPP@ 54CPPFLAGS = @CPPFLAGS@ 55CXX = @CXX@ 56CXXCPP = @CXXCPP@ 57CXXDEPMODE = @CXXDEPMODE@ 58CXXFLAGS = @CXXFLAGS@ 59CYGPATH_W = @CYGPATH_W@ 60DEFS = @DEFS@ 61DEPDIR = @DEPDIR@ 62DL_LIB = @DL_LIB@ 63ECHO = @ECHO@ 64ECHO_C = @ECHO_C@ 65ECHO_N = @ECHO_N@ 66ECHO_T = @ECHO_T@ 67EGREP = @EGREP@ 68EXEEXT = @EXEEXT@ 69F77 = @F77@ 70FFLAGS = @FFLAGS@ 71FLOWTOOLS_INCLUDE = @FLOWTOOLS_INCLUDE@ 72FLOWTOOLS_LIBS = @FLOWTOOLS_LIBS@ 73GDLIBS = @GDLIBS@ 74GD_INCDIR = @GD_INCDIR@ 75GD_LIBDIR = @GD_LIBDIR@ 76GMSGFMT = @GMSGFMT@ 77INSTALL_DATA = @INSTALL_DATA@ 78INSTALL_PROGRAM = @INSTALL_PROGRAM@ 79INSTALL_SCRIPT = @INSTALL_SCRIPT@ 80INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 81INTLINC = @INTLINC@ 82INTLLIBS = @INTLLIBS@ 83LDFLAGS = @LDFLAGS@ 84LIBICONV = @LIBICONV@ 85LIBINTL = @LIBINTL@ 86LIBOBJS = @LIBOBJS@ 87LIBS = @LIBS@ 88LIBTOOL = @LIBTOOL@ 89LN_S = @LN_S@ 90LTLIBICONV = @LTLIBICONV@ 91LTLIBINTL = @LTLIBINTL@ 92LTLIBOBJS = @LTLIBOBJS@ 93MAINT = @MAINT@ 94MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ 95MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ 96MAKEINFO = @MAKEINFO@ 97MKINSTALLDIRS = @MKINSTALLDIRS@ 98MSGFMT = @MSGFMT@ 99MSGMERGE = @MSGMERGE@ 100MYSQL_INCLUDE = @MYSQL_INCLUDE@ 101MYSQL_LIBS = @MYSQL_LIBS@ 102M_LIB = @M_LIB@ 103OBJEXT = @OBJEXT@ 104PACKAGE = @PACKAGE@ 105PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 106PACKAGE_NAME = @PACKAGE_NAME@ 107PACKAGE_STRING = @PACKAGE_STRING@ 108PACKAGE_TARNAME = @PACKAGE_TARNAME@ 109PACKAGE_VERSION = @PACKAGE_VERSION@ 110PATH_SEPARATOR = @PATH_SEPARATOR@ 111PCRE = @PCRE@ 112PCRE_LIB = @PCRE_LIB@ 113PERL = @PERL@ 114POSUB = @POSUB@ 115RANLIB = @RANLIB@ 116RUN_TESTS_FALSE = @RUN_TESTS_FALSE@ 117RUN_TESTS_TRUE = @RUN_TESTS_TRUE@ 118SET_MAKE = @SET_MAKE@ 119SHELL = @SHELL@ 120STRIP = @STRIP@ 121SYBASE_INCLUDE = @SYBASE_INCLUDE@ 122SYBASE_LIBS = @SYBASE_LIBS@ 123U = @U@ 124USE_NLS = @USE_NLS@ 125VERSION = @VERSION@ 126XGETTEXT = @XGETTEXT@ 127XML2_CONFIG = @XML2_CONFIG@ 128XML_CFLAGS = @XML_CFLAGS@ 129XML_LIBS = @XML_LIBS@ 130Z_LIB = @Z_LIB@ 131ac_ct_AR = @ac_ct_AR@ 132ac_ct_CC = @ac_ct_CC@ 133ac_ct_CXX = @ac_ct_CXX@ 134ac_ct_F77 = @ac_ct_F77@ 135ac_ct_RANLIB = @ac_ct_RANLIB@ 136ac_ct_STRIP = @ac_ct_STRIP@ 137am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ 138am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ 139am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ 140am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ 141am__include = @am__include@ 142am__leading_dot = @am__leading_dot@ 143am__quote = @am__quote@ 144bindir = @bindir@ 145build = @build@ 146build_alias = @build_alias@ 147build_cpu = @build_cpu@ 148build_os = @build_os@ 149build_vendor = @build_vendor@ 150config_path = @config_path@ 151datadir = @datadir@ 152exec_prefix = @exec_prefix@ 153host = @host@ 154host_alias = @host_alias@ 155host_cpu = @host_cpu@ 156host_os = @host_os@ 157host_vendor = @host_vendor@ 158includedir = @includedir@ 159infodir = @infodir@ 160install_sh = @install_sh@ 161libdir = @libdir@ 162libexecdir = @libexecdir@ 163localedir = @localedir@ 164localstatedir = @localstatedir@ 165mandir = @mandir@ 166oldincludedir = @oldincludedir@ 167prefix = @prefix@ 168program_transform_name = @program_transform_name@ 169sbindir = @sbindir@ 170sharedstatedir = @sharedstatedir@ 171sysconfdir = @sysconfdir@ 172target = @target@ 173target_alias = @target_alias@ 174target_cpu = @target_cpu@ 175target_os = @target_os@ 176target_vendor = @target_vendor@ 177SUBDIRS = example-setup-1 178 179pkgsysconfdir = ${sysconfdir}/@PACKAGE@ 180 181mlaconf = \ 182 group.os.conf group.ua.conf group.url.conf \ 183 group.host.conf match.os.conf \ 184 match.ua.conf match.searchengines.conf group.searchengines.conf \ 185 ignore.searchengines.conf group.extension.conf \ 186 modlogan.def.conf-dist modlogan.css-dist match.useragents.conf 187 188 189pkgsysconf_DATA = $(mlaconf) modlogan.conf-dist 190 191man1_MANS = modlogan.1 192 193EXTRA_DIST = glosar stats \ 194 writing-plugins.txt using-plugins.txt translations.txt \ 195 license.GD $(man1_MANS) \ 196 header.ihtml footer.ihtml output.tmpl \ 197 manual.txt faq.txt convert_to_055.pl \ 198 convert_to_060.pl create_plugin.sh create_datatype.sh \ 199 manual.sgml convert_history_to_07x.pl \ 200 Changes-0.7.0.txt $(mlaconf) modlogan.conf-dist.in \ 201 Changes-0.8.0.txt 202 203subdir = doc 204ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 205mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs 206CONFIG_HEADER = $(top_builddir)/config.h 207CONFIG_CLEAN_FILES = modlogan.conf-dist 208DIST_SOURCES = 209 210NROFF = nroff 211MANS = $(man1_MANS) 212DATA = $(pkgsysconf_DATA) 213 214 215RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ 216 ps-recursive install-info-recursive uninstall-info-recursive \ 217 all-recursive install-data-recursive install-exec-recursive \ 218 installdirs-recursive install-recursive uninstall-recursive \ 219 check-recursive installcheck-recursive 220DIST_COMMON = Makefile.am Makefile.in modlogan.conf-dist.in 221DIST_SUBDIRS = $(SUBDIRS) 222all: all-recursive 223 224.SUFFIXES: 225$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 226 cd $(top_srcdir) && \ 227 $(AUTOMAKE) --gnu doc/Makefile 228Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status 229 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) 230modlogan.conf-dist: $(top_builddir)/config.status modlogan.conf-dist.in 231 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ 232 233mostlyclean-libtool: 234 -rm -f *.lo 235 236clean-libtool: 237 -rm -rf .libs _libs 238 239distclean-libtool: 240 -rm -f libtool 241uninstall-info-am: 242 243man1dir = $(mandir)/man1 244install-man1: $(man1_MANS) $(man_MANS) 245 @$(NORMAL_INSTALL) 246 $(mkinstalldirs) $(DESTDIR)$(man1dir) 247 @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ 248 l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ 249 for i in $$l2; do \ 250 case "$$i" in \ 251 *.1*) list="$$list $$i" ;; \ 252 esac; \ 253 done; \ 254 for i in $$list; do \ 255 if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ 256 else file=$$i; fi; \ 257 ext=`echo $$i | sed -e 's/^.*\\.//'`; \ 258 case "$$ext" in \ 259 1*) ;; \ 260 *) ext='1' ;; \ 261 esac; \ 262 inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ 263 inst=`echo $$inst | sed -e 's/^.*\///'`; \ 264 inst=`echo $$inst | sed '$(transform)'`.$$ext; \ 265 echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ 266 $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ 267 done 268uninstall-man1: 269 @$(NORMAL_UNINSTALL) 270 @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ 271 l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ 272 for i in $$l2; do \ 273 case "$$i" in \ 274 *.1*) list="$$list $$i" ;; \ 275 esac; \ 276 done; \ 277 for i in $$list; do \ 278 ext=`echo $$i | sed -e 's/^.*\\.//'`; \ 279 case "$$ext" in \ 280 1*) ;; \ 281 *) ext='1' ;; \ 282 esac; \ 283 inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ 284 inst=`echo $$inst | sed -e 's/^.*\///'`; \ 285 inst=`echo $$inst | sed '$(transform)'`.$$ext; \ 286 echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ 287 rm -f $(DESTDIR)$(man1dir)/$$inst; \ 288 done 289pkgsysconfDATA_INSTALL = $(INSTALL_DATA) 290install-pkgsysconfDATA: $(pkgsysconf_DATA) 291 @$(NORMAL_INSTALL) 292 $(mkinstalldirs) $(DESTDIR)$(pkgsysconfdir) 293 @list='$(pkgsysconf_DATA)'; for p in $$list; do \ 294 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 295 f="`echo $$p | sed -e 's|^.*/||'`"; \ 296 echo " $(pkgsysconfDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgsysconfdir)/$$f"; \ 297 $(pkgsysconfDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgsysconfdir)/$$f; \ 298 done 299 300uninstall-pkgsysconfDATA: 301 @$(NORMAL_UNINSTALL) 302 @list='$(pkgsysconf_DATA)'; for p in $$list; do \ 303 f="`echo $$p | sed -e 's|^.*/||'`"; \ 304 echo " rm -f $(DESTDIR)$(pkgsysconfdir)/$$f"; \ 305 rm -f $(DESTDIR)$(pkgsysconfdir)/$$f; \ 306 done 307 308# This directory's subdirectories are mostly independent; you can cd 309# into them and run `make' without going through this Makefile. 310# To change the values of `make' variables: instead of editing Makefiles, 311# (1) if the variable is set in `config.status', edit `config.status' 312# (which will cause the Makefiles to be regenerated when you run `make'); 313# (2) otherwise, pass the desired values on the `make' command line. 314$(RECURSIVE_TARGETS): 315 @set fnord $$MAKEFLAGS; amf=$$2; \ 316 dot_seen=no; \ 317 target=`echo $@ | sed s/-recursive//`; \ 318 list='$(SUBDIRS)'; for subdir in $$list; do \ 319 echo "Making $$target in $$subdir"; \ 320 if test "$$subdir" = "."; then \ 321 dot_seen=yes; \ 322 local_target="$$target-am"; \ 323 else \ 324 local_target="$$target"; \ 325 fi; \ 326 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 327 || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ 328 done; \ 329 if test "$$dot_seen" = "no"; then \ 330 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 331 fi; test -z "$$fail" 332 333mostlyclean-recursive clean-recursive distclean-recursive \ 334maintainer-clean-recursive: 335 @set fnord $$MAKEFLAGS; amf=$$2; \ 336 dot_seen=no; \ 337 case "$@" in \ 338 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 339 *) list='$(SUBDIRS)' ;; \ 340 esac; \ 341 rev=''; for subdir in $$list; do \ 342 if test "$$subdir" = "."; then :; else \ 343 rev="$$subdir $$rev"; \ 344 fi; \ 345 done; \ 346 rev="$$rev ."; \ 347 target=`echo $@ | sed s/-recursive//`; \ 348 for subdir in $$rev; do \ 349 echo "Making $$target in $$subdir"; \ 350 if test "$$subdir" = "."; then \ 351 local_target="$$target-am"; \ 352 else \ 353 local_target="$$target"; \ 354 fi; \ 355 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 356 || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ 357 done && test -z "$$fail" 358tags-recursive: 359 list='$(SUBDIRS)'; for subdir in $$list; do \ 360 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 361 done 362ctags-recursive: 363 list='$(SUBDIRS)'; for subdir in $$list; do \ 364 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 365 done 366 367ETAGS = etags 368ETAGSFLAGS = 369 370CTAGS = ctags 371CTAGSFLAGS = 372 373tags: TAGS 374 375ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 376 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 377 unique=`for i in $$list; do \ 378 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 379 done | \ 380 $(AWK) ' { files[$$0] = 1; } \ 381 END { for (i in files) print i; }'`; \ 382 mkid -fID $$unique 383 384TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 385 $(TAGS_FILES) $(LISP) 386 tags=; \ 387 here=`pwd`; \ 388 if (etags --etags-include --version) >/dev/null 2>&1; then \ 389 include_option=--etags-include; \ 390 else \ 391 include_option=--include; \ 392 fi; \ 393 list='$(SUBDIRS)'; for subdir in $$list; do \ 394 if test "$$subdir" = .; then :; else \ 395 test -f $$subdir/TAGS && \ 396 tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ 397 fi; \ 398 done; \ 399 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 400 unique=`for i in $$list; do \ 401 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 402 done | \ 403 $(AWK) ' { files[$$0] = 1; } \ 404 END { for (i in files) print i; }'`; \ 405 test -z "$(ETAGS_ARGS)$$tags$$unique" \ 406 || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 407 $$tags $$unique 408 409ctags: CTAGS 410CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 411 $(TAGS_FILES) $(LISP) 412 tags=; \ 413 here=`pwd`; \ 414 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 415 unique=`for i in $$list; do \ 416 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 417 done | \ 418 $(AWK) ' { files[$$0] = 1; } \ 419 END { for (i in files) print i; }'`; \ 420 test -z "$(CTAGS_ARGS)$$tags$$unique" \ 421 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 422 $$tags $$unique 423 424GTAGS: 425 here=`$(am__cd) $(top_builddir) && pwd` \ 426 && cd $(top_srcdir) \ 427 && gtags -i $(GTAGS_ARGS) $$here 428 429distclean-tags: 430 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 431DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 432 433top_distdir = .. 434distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) 435 436distdir: $(DISTFILES) 437 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ 438 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ 439 list='$(DISTFILES)'; for file in $$list; do \ 440 case $$file in \ 441 $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ 442 $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ 443 esac; \ 444 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 445 dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ 446 if test "$$dir" != "$$file" && test "$$dir" != "."; then \ 447 dir="/$$dir"; \ 448 $(mkinstalldirs) "$(distdir)$$dir"; \ 449 else \ 450 dir=''; \ 451 fi; \ 452 if test -d $$d/$$file; then \ 453 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 454 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ 455 fi; \ 456 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ 457 else \ 458 test -f $(distdir)/$$file \ 459 || cp -p $$d/$$file $(distdir)/$$file \ 460 || exit 1; \ 461 fi; \ 462 done 463 list='$(SUBDIRS)'; for subdir in $$list; do \ 464 if test "$$subdir" = .; then :; else \ 465 test -d $(distdir)/$$subdir \ 466 || mkdir $(distdir)/$$subdir \ 467 || exit 1; \ 468 (cd $$subdir && \ 469 $(MAKE) $(AM_MAKEFLAGS) \ 470 top_distdir="$(top_distdir)" \ 471 distdir=../$(distdir)/$$subdir \ 472 distdir) \ 473 || exit 1; \ 474 fi; \ 475 done 476check-am: all-am 477check: check-recursive 478all-am: Makefile $(MANS) $(DATA) 479installdirs: installdirs-recursive 480installdirs-am: 481 $(mkinstalldirs) $(DESTDIR)$(man1dir) $(DESTDIR)$(pkgsysconfdir) 482 483install: install-recursive 484install-exec: install-exec-recursive 485install-data: install-data-recursive 486uninstall: uninstall-recursive 487 488install-am: all-am 489 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 490 491installcheck: installcheck-recursive 492install-strip: 493 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 494 INSTALL_STRIP_FLAG=-s \ 495 `test -z '$(STRIP)' || \ 496 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 497mostlyclean-generic: 498 499clean-generic: 500 501distclean-generic: 502 -rm -f Makefile $(CONFIG_CLEAN_FILES) 503 504maintainer-clean-generic: 505 @echo "This command is intended for maintainers to use" 506 @echo "it deletes files that may require special tools to rebuild." 507clean: clean-recursive 508 509clean-am: clean-generic clean-libtool mostlyclean-am 510 511distclean: distclean-recursive 512 513distclean-am: clean-am distclean-generic distclean-libtool \ 514 distclean-tags 515 516dvi: dvi-recursive 517 518dvi-am: 519 520info: info-recursive 521 522info-am: 523 524install-data-am: install-man install-pkgsysconfDATA 525 526install-exec-am: 527 528install-info: install-info-recursive 529 530install-man: install-man1 531 532installcheck-am: 533 534maintainer-clean: maintainer-clean-recursive 535 536maintainer-clean-am: distclean-am maintainer-clean-generic 537 538mostlyclean: mostlyclean-recursive 539 540mostlyclean-am: mostlyclean-generic mostlyclean-libtool 541 542pdf: pdf-recursive 543 544pdf-am: 545 546ps: ps-recursive 547 548ps-am: 549 550uninstall-am: uninstall-info-am uninstall-man uninstall-pkgsysconfDATA 551 552uninstall-info: uninstall-info-recursive 553 554uninstall-man: uninstall-man1 555 556.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ 557 clean-generic clean-libtool clean-recursive ctags \ 558 ctags-recursive distclean distclean-generic distclean-libtool \ 559 distclean-recursive distclean-tags distdir dvi dvi-am \ 560 dvi-recursive info info-am info-recursive install install-am \ 561 install-data install-data-am install-data-recursive \ 562 install-exec install-exec-am install-exec-recursive \ 563 install-info install-info-am install-info-recursive install-man \ 564 install-man1 install-pkgsysconfDATA install-recursive \ 565 install-strip installcheck installcheck-am installdirs \ 566 installdirs-am installdirs-recursive maintainer-clean \ 567 maintainer-clean-generic maintainer-clean-recursive mostlyclean \ 568 mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ 569 pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \ 570 tags-recursive uninstall uninstall-am uninstall-info-am \ 571 uninstall-info-recursive uninstall-man uninstall-man1 \ 572 uninstall-pkgsysconfDATA uninstall-recursive 573 574 575docs: manual.pdf manual.ps manual.html 576 577manual.pdf: 578 db2pdf manual.sgml 579 580manual.ps: 581 db2ps manual.sgml 582 583manual.html: 584 db2html manual.sgml 585# Tell versions [3.59,3.63) of GNU make to not export all variables. 586# Otherwise a system limit (for SysV at least) may be exceeded. 587.NOEXPORT: 588