1# Makefile.in generated by automake 1.16.2 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2020 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Makefile.am for traffic/iocore 18# 19# Licensed to the Apache Software Foundation (ASF) under one 20# or more contributor license agreements. See the NOTICE file 21# distributed with this work for additional information 22# regarding copyright ownership. The ASF licenses this file 23# to you under the Apache License, Version 2.0 (the 24# "License"); you may not use this file except in compliance 25# with the License. You may obtain a copy of the License at 26# 27# http://www.apache.org/licenses/LICENSE-2.0 28# 29# Unless required by applicable law or agreed to in writing, software 30# distributed under the License is distributed on an "AS IS" BASIS, 31# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 32# See the License for the specific language governing permissions and 33# limitations under the License. 34VPATH = @srcdir@ 35am__is_gnu_make = { \ 36 if test -z '$(MAKELEVEL)'; then \ 37 false; \ 38 elif test -n '$(MAKE_HOST)'; then \ 39 true; \ 40 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 41 true; \ 42 else \ 43 false; \ 44 fi; \ 45} 46am__make_running_with_option = \ 47 case $${target_option-} in \ 48 ?) ;; \ 49 *) echo "am__make_running_with_option: internal error: invalid" \ 50 "target option '$${target_option-}' specified" >&2; \ 51 exit 1;; \ 52 esac; \ 53 has_opt=no; \ 54 sane_makeflags=$$MAKEFLAGS; \ 55 if $(am__is_gnu_make); then \ 56 sane_makeflags=$$MFLAGS; \ 57 else \ 58 case $$MAKEFLAGS in \ 59 *\\[\ \ ]*) \ 60 bs=\\; \ 61 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 62 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 63 esac; \ 64 fi; \ 65 skip_next=no; \ 66 strip_trailopt () \ 67 { \ 68 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 69 }; \ 70 for flg in $$sane_makeflags; do \ 71 test $$skip_next = yes && { skip_next=no; continue; }; \ 72 case $$flg in \ 73 *=*|--*) continue;; \ 74 -*I) strip_trailopt 'I'; skip_next=yes;; \ 75 -*I?*) strip_trailopt 'I';; \ 76 -*O) strip_trailopt 'O'; skip_next=yes;; \ 77 -*O?*) strip_trailopt 'O';; \ 78 -*l) strip_trailopt 'l'; skip_next=yes;; \ 79 -*l?*) strip_trailopt 'l';; \ 80 -[dEDm]) skip_next=yes;; \ 81 -[JT]) skip_next=yes;; \ 82 esac; \ 83 case $$flg in \ 84 *$$target_option*) has_opt=yes; break;; \ 85 esac; \ 86 done; \ 87 test $$has_opt = yes 88am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 89am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 90pkgincludedir = $(includedir)/@PACKAGE@ 91am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 92install_sh_DATA = $(install_sh) -c -m 644 93install_sh_PROGRAM = $(install_sh) -c 94install_sh_SCRIPT = $(install_sh) -c 95INSTALL_HEADER = $(INSTALL_DATA) 96transform = $(program_transform_name) 97NORMAL_INSTALL = : 98PRE_INSTALL = : 99POST_INSTALL = : 100NORMAL_UNINSTALL = : 101PRE_UNINSTALL = : 102POST_UNINSTALL = : 103build_triplet = @build@ 104host_triplet = @host@ 105subdir = iocore 106ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 107am__aclocal_m4_deps = $(top_srcdir)/build/atomic.m4 \ 108 $(top_srcdir)/build/ax_check_openssl.m4 \ 109 $(top_srcdir)/build/ax_compare_version.m4 \ 110 $(top_srcdir)/build/ax_compiler_vendor.m4 \ 111 $(top_srcdir)/build/ax_lib_curl.m4 \ 112 $(top_srcdir)/build/ax_lib_readline.m4 \ 113 $(top_srcdir)/build/ax_path_generic.m4 \ 114 $(top_srcdir)/build/ax_perl_modules.m4 \ 115 $(top_srcdir)/build/ax_require_defined.m4 \ 116 $(top_srcdir)/build/ax_with_curses.m4 \ 117 $(top_srcdir)/build/boringocsp.m4 \ 118 $(top_srcdir)/build/brotli.m4 $(top_srcdir)/build/cjose.m4 \ 119 $(top_srcdir)/build/common.m4 $(top_srcdir)/build/crypto.m4 \ 120 $(top_srcdir)/build/hiredis.m4 $(top_srcdir)/build/jansson.m4 \ 121 $(top_srcdir)/build/jemalloc.m4 $(top_srcdir)/build/libtool.m4 \ 122 $(top_srcdir)/build/ltoptions.m4 \ 123 $(top_srcdir)/build/ltsugar.m4 \ 124 $(top_srcdir)/build/ltversion.m4 \ 125 $(top_srcdir)/build/lt~obsolete.m4 \ 126 $(top_srcdir)/build/luajit.m4 $(top_srcdir)/build/lzma.m4 \ 127 $(top_srcdir)/build/network.m4 $(top_srcdir)/build/pcre.m4 \ 128 $(top_srcdir)/build/pkg.m4 $(top_srcdir)/build/tcmalloc.m4 \ 129 $(top_srcdir)/build/yaml-cpp.m4 $(top_srcdir)/build/zlib.m4 \ 130 $(top_srcdir)/configure.ac 131am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 132 $(ACLOCAL_M4) 133DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) 134mkinstalldirs = $(install_sh) -d 135CONFIG_HEADER = $(top_builddir)/include/ink_autoconf.h 136CONFIG_CLEAN_FILES = 137CONFIG_CLEAN_VPATH_FILES = 138AM_V_P = $(am__v_P_@AM_V@) 139am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 140am__v_P_0 = false 141am__v_P_1 = : 142AM_V_GEN = $(am__v_GEN_@AM_V@) 143am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 144am__v_GEN_0 = @echo " GEN " $@; 145am__v_GEN_1 = 146AM_V_at = $(am__v_at_@AM_V@) 147am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 148am__v_at_0 = @ 149am__v_at_1 = 150SOURCES = 151DIST_SOURCES = 152RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 153 ctags-recursive dvi-recursive html-recursive info-recursive \ 154 install-data-recursive install-dvi-recursive \ 155 install-exec-recursive install-html-recursive \ 156 install-info-recursive install-pdf-recursive \ 157 install-ps-recursive install-recursive installcheck-recursive \ 158 installdirs-recursive pdf-recursive ps-recursive \ 159 tags-recursive uninstall-recursive 160am__can_run_installinfo = \ 161 case $$AM_UPDATE_INFO_DIR in \ 162 n|no|NO) false;; \ 163 *) (install-info --version) >/dev/null 2>&1;; \ 164 esac 165RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 166 distclean-recursive maintainer-clean-recursive 167am__recursive_targets = \ 168 $(RECURSIVE_TARGETS) \ 169 $(RECURSIVE_CLEAN_TARGETS) \ 170 $(am__extra_recursive_targets) 171AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 172 distdir distdir-am 173am__extra_recursive_targets = clang-tidy-recursive 174am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 175# Read a list of newline-separated strings from the standard input, 176# and print each of them once, without duplicates. Input order is 177# *not* preserved. 178am__uniquify_input = $(AWK) '\ 179 BEGIN { nonempty = 0; } \ 180 { items[$$0] = 1; nonempty = 1; } \ 181 END { if (nonempty) { for (i in items) print i; }; } \ 182' 183# Make sure the list of sources is unique. This is necessary because, 184# e.g., the same source file might be shared among _SOURCES variables 185# for different programs/libraries. 186am__define_uniq_tagged_files = \ 187 list='$(am__tagged_files)'; \ 188 unique=`for i in $$list; do \ 189 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 190 done | $(am__uniquify_input)` 191ETAGS = etags 192CTAGS = ctags 193DIST_SUBDIRS = $(SUBDIRS) 194am__DIST_COMMON = $(srcdir)/Makefile.in 195DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 196am__relativize = \ 197 dir0=`pwd`; \ 198 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 199 sed_rest='s,^[^/]*/*,,'; \ 200 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 201 sed_butlast='s,/*[^/]*$$,,'; \ 202 while test -n "$$dir1"; do \ 203 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 204 if test "$$first" != "."; then \ 205 if test "$$first" = ".."; then \ 206 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 207 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 208 else \ 209 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 210 if test "$$first2" = "$$first"; then \ 211 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 212 else \ 213 dir2="../$$dir2"; \ 214 fi; \ 215 dir0="$$dir0"/"$$first"; \ 216 fi; \ 217 fi; \ 218 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 219 done; \ 220 reldir="$$dir2" 221pkgdatadir = @pkgdatadir@ 222pkglibdir = @pkglibdir@ 223pkglibexecdir = @pkglibexecdir@ 224ACLOCAL = @ACLOCAL@ 225AMTAR = @AMTAR@ 226AM_CFLAGS = @AM_CFLAGS@ 227AM_CPPFLAGS = @AM_CPPFLAGS@ 228AM_CXXFLAGS = @AM_CXXFLAGS@ 229AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 230AM_LDFLAGS = @AM_LDFLAGS@ 231AR = @AR@ 232ASCPP = @ASCPP@ 233ATOMIC_LIBS = @ATOMIC_LIBS@ 234AUTOCONF = @AUTOCONF@ 235AUTOHEADER = @AUTOHEADER@ 236AUTOMAKE = @AUTOMAKE@ 237AWK = @AWK@ 238BORINGOCSP_INCLUDES = @BORINGOCSP_INCLUDES@ 239BORINGOCSP_LDFLAGS = @BORINGOCSP_LDFLAGS@ 240BORINGOCSP_LIBS = @BORINGOCSP_LIBS@ 241BROTLIENC_CFLAGS = @BROTLIENC_CFLAGS@ 242BROTLIENC_LIB = @BROTLIENC_LIB@ 243CC = @CC@ 244CCACHE = @CCACHE@ 245CCAS = @CCAS@ 246CCASDEPMODE = @CCASDEPMODE@ 247CCASFLAGS = @CCASFLAGS@ 248CCDEPMODE = @CCDEPMODE@ 249CFLAGS = @CFLAGS@ 250CFLAGS_HIREDIS = @CFLAGS_HIREDIS@ 251CLANG_TIDY = @CLANG_TIDY@ 252CPP = @CPP@ 253CPPFLAGS = @CPPFLAGS@ 254CURL_CFLAGS = @CURL_CFLAGS@ 255CURL_CONFIG = @CURL_CONFIG@ 256CURL_LIBS = @CURL_LIBS@ 257CURSES_CFLAGS = @CURSES_CFLAGS@ 258CURSES_LDFLAGS = @CURSES_LDFLAGS@ 259CURSES_LIBS = @CURSES_LIBS@ 260CXX = @CXX@ 261CXXCPP = @CXXCPP@ 262CXXDEPMODE = @CXXDEPMODE@ 263CXXFLAGS = @CXXFLAGS@ 264CYGPATH_W = @CYGPATH_W@ 265DEFS = @DEFS@ 266DEPDIR = @DEPDIR@ 267DLLTOOL = @DLLTOOL@ 268DOXYGEN = @DOXYGEN@ 269DSYMUTIL = @DSYMUTIL@ 270DTRACE = @DTRACE@ 271DUMPBIN = @DUMPBIN@ 272ECHO_C = @ECHO_C@ 273ECHO_N = @ECHO_N@ 274ECHO_T = @ECHO_T@ 275EGREP = @EGREP@ 276EXEEXT = @EXEEXT@ 277FGREP = @FGREP@ 278FLEX_CFLAGS = @FLEX_CFLAGS@ 279GEOIP_LIBS = @GEOIP_LIBS@ 280GREP = @GREP@ 281HOST_GUESS = @HOST_GUESS@ 282HWLOC_CFLAGS = @HWLOC_CFLAGS@ 283HWLOC_LIBS = @HWLOC_LIBS@ 284INSTALL = @INSTALL@ 285INSTALL_DATA = @INSTALL_DATA@ 286INSTALL_PROGRAM = @INSTALL_PROGRAM@ 287INSTALL_SCRIPT = @INSTALL_SCRIPT@ 288INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 289JAVA = @JAVA@ 290LD = @LD@ 291LDFLAGS = @LDFLAGS@ 292LEX = @LEX@ 293LEXLIB = @LEXLIB@ 294LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ 295LIBBROTLIENC_CFLAGS = @LIBBROTLIENC_CFLAGS@ 296LIBBROTLIENC_LIBS = @LIBBROTLIENC_LIBS@ 297LIBCAP = @LIBCAP@ 298LIBCJOSE = @LIBCJOSE@ 299LIBCRYPT = @LIBCRYPT@ 300LIBJANSSON = @LIBJANSSON@ 301LIBLZMA = @LIBLZMA@ 302LIBMAGICKCPP_CFLAGS = @LIBMAGICKCPP_CFLAGS@ 303LIBMAGICKCPP_LIBS = @LIBMAGICKCPP_LIBS@ 304LIBOBJS = @LIBOBJS@ 305LIBPCRE = @LIBPCRE@ 306LIBPROFILER = @LIBPROFILER@ 307LIBREADLINE = @LIBREADLINE@ 308LIBRESOLV = @LIBRESOLV@ 309LIBS = @LIBS@ 310LIBTOOL = @LIBTOOL@ 311LIBUNWIND_CFLAGS = @LIBUNWIND_CFLAGS@ 312LIBUNWIND_LIBS = @LIBUNWIND_LIBS@ 313LIBZ = @LIBZ@ 314LIB_HIREDIS = @LIB_HIREDIS@ 315LIB_KYOTOCABINET = @LIB_KYOTOCABINET@ 316LIB_MYSQLCLIENT = @LIB_MYSQLCLIENT@ 317LIPO = @LIPO@ 318LN_S = @LN_S@ 319LTLIBOBJS = @LTLIBOBJS@ 320LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 321LUAJIT_CFLAGS = @LUAJIT_CFLAGS@ 322LUAJIT_CPPFLAGS = @LUAJIT_CPPFLAGS@ 323LUAJIT_DARWIN_LDFLAGS = @LUAJIT_DARWIN_LDFLAGS@ 324LUAJIT_LDFLAGS = @LUAJIT_LDFLAGS@ 325LUAJIT_LIBS = @LUAJIT_LIBS@ 326MAINT = @MAINT@ 327MAKEINFO = @MAKEINFO@ 328MANIFEST_TOOL = @MANIFEST_TOOL@ 329MAXMINDDB_LIBS = @MAXMINDDB_LIBS@ 330MKDIR_P = @MKDIR_P@ 331NM = @NM@ 332NMEDIT = @NMEDIT@ 333OBJDUMP = @OBJDUMP@ 334OBJEXT = @OBJEXT@ 335OPENSSL_INCLUDES = @OPENSSL_INCLUDES@ 336OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@ 337OPENSSL_LIBS = @OPENSSL_LIBS@ 338OTOOL = @OTOOL@ 339OTOOL64 = @OTOOL64@ 340PACKAGE = @PACKAGE@ 341PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 342PACKAGE_NAME = @PACKAGE_NAME@ 343PACKAGE_STRING = @PACKAGE_STRING@ 344PACKAGE_TARNAME = @PACKAGE_TARNAME@ 345PACKAGE_URL = @PACKAGE_URL@ 346PACKAGE_VERSION = @PACKAGE_VERSION@ 347PATH_SEPARATOR = @PATH_SEPARATOR@ 348PCRE_CONFIG = @PCRE_CONFIG@ 349PERL = @PERL@ 350PKG_CONFIG = @PKG_CONFIG@ 351PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 352PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 353PYTHON = @PYTHON@ 354PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ 355PYTHON_PLATFORM = @PYTHON_PLATFORM@ 356PYTHON_PREFIX = @PYTHON_PREFIX@ 357PYTHON_VERSION = @PYTHON_VERSION@ 358RANLIB = @RANLIB@ 359RM = @RM@ 360RPATH = @RPATH@ 361SED = @SED@ 362SET_MAKE = @SET_MAKE@ 363SHELL = @SHELL@ 364SPHINXBUILD = @SPHINXBUILD@ 365SPHINXOPTS = @SPHINXOPTS@ 366STRIP = @STRIP@ 367TS_INCLUDES = @TS_INCLUDES@ 368TS_LIBTOOL_VERSION = @TS_LIBTOOL_VERSION@ 369TS_MAN1_MANPAGES = @TS_MAN1_MANPAGES@ 370TS_MAN3_MANPAGES = @TS_MAN3_MANPAGES@ 371TS_MAN5_MANPAGES = @TS_MAN5_MANPAGES@ 372TS_MAN8_MANPAGES = @TS_MAN8_MANPAGES@ 373TS_VERSION_MAJOR = @TS_VERSION_MAJOR@ 374TS_VERSION_MICRO = @TS_VERSION_MICRO@ 375TS_VERSION_MINOR = @TS_VERSION_MINOR@ 376TS_VERSION_NUMBER = @TS_VERSION_NUMBER@ 377TS_VERSION_STRING = @TS_VERSION_STRING@ 378VERSION = @VERSION@ 379YACC = @YACC@ 380YAMLCPP_INCLUDES = @YAMLCPP_INCLUDES@ 381YAMLCPP_LDFLAGS = @YAMLCPP_LDFLAGS@ 382YAMLCPP_LIBS = @YAMLCPP_LIBS@ 383abs_builddir = @abs_builddir@ 384abs_srcdir = @abs_srcdir@ 385abs_top_builddir = @abs_top_builddir@ 386abs_top_srcdir = @abs_top_srcdir@ 387ac_ct_AR = @ac_ct_AR@ 388ac_ct_CC = @ac_ct_CC@ 389ac_ct_CXX = @ac_ct_CXX@ 390ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 391am__include = @am__include@ 392am__leading_dot = @am__leading_dot@ 393am__quote = @am__quote@ 394am__tar = @am__tar@ 395am__untar = @am__untar@ 396bindir = @bindir@ 397build = @build@ 398build_alias = @build_alias@ 399build_cpu = @build_cpu@ 400build_group = @build_group@ 401build_machine = @build_machine@ 402build_number = @build_number@ 403build_os = @build_os@ 404build_person = @build_person@ 405build_vendor = @build_vendor@ 406builddir = @builddir@ 407cachedir = @cachedir@ 408datadir = @datadir@ 409datarootdir = @datarootdir@ 410default_loopback_iface = @default_loopback_iface@ 411default_stack_size = @default_stack_size@ 412docdir = @docdir@ 413dvidir = @dvidir@ 414enable_fips = @enable_fips@ 415enable_remote_cov_commit = @enable_remote_cov_commit@ 416exec_prefix = @exec_prefix@ 417exp_bindir = @exp_bindir@ 418exp_cachedir = @exp_cachedir@ 419exp_datadir = @exp_datadir@ 420exp_docdir = @exp_docdir@ 421exp_exec_prefix = @exp_exec_prefix@ 422exp_includedir = @exp_includedir@ 423exp_infodir = @exp_infodir@ 424exp_installbuilddir = @exp_installbuilddir@ 425exp_libdir = @exp_libdir@ 426exp_libexecdir = @exp_libexecdir@ 427exp_localstatedir = @exp_localstatedir@ 428exp_logdir = @exp_logdir@ 429exp_mandir = @exp_mandir@ 430exp_prefix = @exp_prefix@ 431exp_runtimedir = @exp_runtimedir@ 432exp_sbindir = @exp_sbindir@ 433exp_sysconfdir = @exp_sysconfdir@ 434has_128bit_cas = @has_128bit_cas@ 435has_backtrace = @has_backtrace@ 436has_boringocsp = @has_boringocsp@ 437has_expensive_tests = @has_expensive_tests@ 438has_geoip = @has_geoip@ 439has_in6_is_addr_unspecified = @has_in6_is_addr_unspecified@ 440has_ip_tos = @has_ip_tos@ 441has_kyotocabinet = @has_kyotocabinet@ 442has_luajit = @has_luajit@ 443has_maxminddb = @has_maxminddb@ 444has_mysql = @has_mysql@ 445has_profiler = @has_profiler@ 446has_so_mark = @has_so_mark@ 447has_so_peercred = @has_so_peercred@ 448has_tcmalloc = @has_tcmalloc@ 449has_tests = @has_tests@ 450has_tls_early_data = @has_tls_early_data@ 451has_tls_session_ticket = @has_tls_session_ticket@ 452has_wccp = @has_wccp@ 453host = @host@ 454host_alias = @host_alias@ 455host_cpu = @host_cpu@ 456host_os = @host_os@ 457host_vendor = @host_vendor@ 458htmldir = @htmldir@ 459includedir = @includedir@ 460infodir = @infodir@ 461install_sh = @install_sh@ 462installbuilddir = @installbuilddir@ 463iocore_include_dirs = @iocore_include_dirs@ 464ip_transparent = @ip_transparent@ 465jemalloch = @jemalloch@ 466libdir = @libdir@ 467libexecdir = @libexecdir@ 468localedir = @localedir@ 469localstatedir = @localstatedir@ 470logdir = @logdir@ 471mandir = @mandir@ 472max_event_threads = @max_event_threads@ 473max_host_name_len = @max_host_name_len@ 474max_threads_per_type = @max_threads_per_type@ 475mkdir_p = @mkdir_p@ 476oldincludedir = @oldincludedir@ 477pdfdir = @pdfdir@ 478pkgbindir = @pkgbindir@ 479pkgcachedir = @pkgcachedir@ 480pkgdocdir = @pkgdocdir@ 481pkglocalstatedir = @pkglocalstatedir@ 482pkglogdir = @pkglogdir@ 483pkgpyexecdir = @pkgpyexecdir@ 484pkgpythondir = @pkgpythondir@ 485pkgruntimedir = @pkgruntimedir@ 486pkgsbindir = @pkgsbindir@ 487pkgsysconfdir = @pkgsysconfdir@ 488pkgsysgroup = @pkgsysgroup@ 489pkgsysuser = @pkgsysuser@ 490prefix = @prefix@ 491program_transform_name = @program_transform_name@ 492psdir = @psdir@ 493pyexecdir = @pyexecdir@ 494pythondir = @pythondir@ 495rel_bindir = @rel_bindir@ 496rel_cachedir = @rel_cachedir@ 497rel_datadir = @rel_datadir@ 498rel_docdir = @rel_docdir@ 499rel_exec_prefix = @rel_exec_prefix@ 500rel_includedir = @rel_includedir@ 501rel_infodir = @rel_infodir@ 502rel_installbuilddir = @rel_installbuilddir@ 503rel_libdir = @rel_libdir@ 504rel_libexecdir = @rel_libexecdir@ 505rel_localstatedir = @rel_localstatedir@ 506rel_logdir = @rel_logdir@ 507rel_mandir = @rel_mandir@ 508rel_prefix = @rel_prefix@ 509rel_runtimedir = @rel_runtimedir@ 510rel_sbindir = @rel_sbindir@ 511rel_sysconfdir = @rel_sysconfdir@ 512runstatedir = @runstatedir@ 513runtimedir = @runtimedir@ 514sbindir = @sbindir@ 515sharedstatedir = @sharedstatedir@ 516srcdir = @srcdir@ 517sysconfdir = @sysconfdir@ 518target_alias = @target_alias@ 519top_build_prefix = @top_build_prefix@ 520top_builddir = @top_builddir@ 521top_srcdir = @top_srcdir@ 522use_boringocsp = @use_boringocsp@ 523use_dh_get_2048_256 = @use_dh_get_2048_256@ 524use_diags = @use_diags@ 525use_epoll = @use_epoll@ 526use_fast_sdk = @use_fast_sdk@ 527use_hello_cb = @use_hello_cb@ 528use_hkdf = @use_hkdf@ 529use_hrw_geoip = @use_hrw_geoip@ 530use_hrw_maxminddb = @use_hrw_maxminddb@ 531use_hwloc = @use_hwloc@ 532use_kqueue = @use_kqueue@ 533use_linux_native_aio = @use_linux_native_aio@ 534use_port = @use_port@ 535use_posix_cap = @use_posix_cap@ 536use_quic = @use_quic@ 537use_remote_unwinding = @use_remote_unwinding@ 538use_set_rbio = @use_set_rbio@ 539use_tls13 = @use_tls13@ 540use_tls_async = @use_tls_async@ 541use_tls_ocsp = @use_tls_ocsp@ 542use_tls_set_ciphersuites = @use_tls_set_ciphersuites@ 543use_tproxy = @use_tproxy@ 544SUBDIRS = eventsystem net aio dns hostdb utils cache 545all: all-recursive 546 547.SUFFIXES: 548$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 549 @for dep in $?; do \ 550 case '$(am__configure_deps)' in \ 551 *$$dep*) \ 552 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 553 && { if test -f $@; then exit 0; else break; fi; }; \ 554 exit 1;; \ 555 esac; \ 556 done; \ 557 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign iocore/Makefile'; \ 558 $(am__cd) $(top_srcdir) && \ 559 $(AUTOMAKE) --foreign iocore/Makefile 560Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 561 @case '$?' in \ 562 *config.status*) \ 563 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 564 *) \ 565 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ 566 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ 567 esac; 568 569$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 570 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 571 572$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 573 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 574$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 575 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 576$(am__aclocal_m4_deps): 577 578mostlyclean-libtool: 579 -rm -f *.lo 580 581clean-libtool: 582 -rm -rf .libs _libs 583 584# This directory's subdirectories are mostly independent; you can cd 585# into them and run 'make' without going through this Makefile. 586# To change the values of 'make' variables: instead of editing Makefiles, 587# (1) if the variable is set in 'config.status', edit 'config.status' 588# (which will cause the Makefiles to be regenerated when you run 'make'); 589# (2) otherwise, pass the desired values on the 'make' command line. 590$(am__recursive_targets): 591 @fail=; \ 592 if $(am__make_keepgoing); then \ 593 failcom='fail=yes'; \ 594 else \ 595 failcom='exit 1'; \ 596 fi; \ 597 dot_seen=no; \ 598 target=`echo $@ | sed s/-recursive//`; \ 599 case "$@" in \ 600 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 601 *) list='$(SUBDIRS)' ;; \ 602 esac; \ 603 for subdir in $$list; do \ 604 echo "Making $$target in $$subdir"; \ 605 if test "$$subdir" = "."; then \ 606 dot_seen=yes; \ 607 local_target="$$target-am"; \ 608 else \ 609 local_target="$$target"; \ 610 fi; \ 611 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 612 || eval $$failcom; \ 613 done; \ 614 if test "$$dot_seen" = "no"; then \ 615 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 616 fi; test -z "$$fail" 617clang-tidy-local: 618 619ID: $(am__tagged_files) 620 $(am__define_uniq_tagged_files); mkid -fID $$unique 621tags: tags-recursive 622TAGS: tags 623 624tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 625 set x; \ 626 here=`pwd`; \ 627 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 628 include_option=--etags-include; \ 629 empty_fix=.; \ 630 else \ 631 include_option=--include; \ 632 empty_fix=; \ 633 fi; \ 634 list='$(SUBDIRS)'; for subdir in $$list; do \ 635 if test "$$subdir" = .; then :; else \ 636 test ! -f $$subdir/TAGS || \ 637 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 638 fi; \ 639 done; \ 640 $(am__define_uniq_tagged_files); \ 641 shift; \ 642 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 643 test -n "$$unique" || unique=$$empty_fix; \ 644 if test $$# -gt 0; then \ 645 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 646 "$$@" $$unique; \ 647 else \ 648 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 649 $$unique; \ 650 fi; \ 651 fi 652ctags: ctags-recursive 653 654CTAGS: ctags 655ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 656 $(am__define_uniq_tagged_files); \ 657 test -z "$(CTAGS_ARGS)$$unique" \ 658 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 659 $$unique 660 661GTAGS: 662 here=`$(am__cd) $(top_builddir) && pwd` \ 663 && $(am__cd) $(top_srcdir) \ 664 && gtags -i $(GTAGS_ARGS) "$$here" 665cscopelist: cscopelist-recursive 666 667cscopelist-am: $(am__tagged_files) 668 list='$(am__tagged_files)'; \ 669 case "$(srcdir)" in \ 670 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 671 *) sdir=$(subdir)/$(srcdir) ;; \ 672 esac; \ 673 for i in $$list; do \ 674 if test -f "$$i"; then \ 675 echo "$(subdir)/$$i"; \ 676 else \ 677 echo "$$sdir/$$i"; \ 678 fi; \ 679 done >> $(top_builddir)/cscope.files 680 681distclean-tags: 682 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 683 684distdir: $(BUILT_SOURCES) 685 $(MAKE) $(AM_MAKEFLAGS) distdir-am 686 687distdir-am: $(DISTFILES) 688 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 689 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 690 list='$(DISTFILES)'; \ 691 dist_files=`for file in $$list; do echo $$file; done | \ 692 sed -e "s|^$$srcdirstrip/||;t" \ 693 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 694 case $$dist_files in \ 695 */*) $(MKDIR_P) `echo "$$dist_files" | \ 696 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 697 sort -u` ;; \ 698 esac; \ 699 for file in $$dist_files; do \ 700 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 701 if test -d $$d/$$file; then \ 702 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 703 if test -d "$(distdir)/$$file"; then \ 704 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 705 fi; \ 706 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 707 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 708 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 709 fi; \ 710 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 711 else \ 712 test -f "$(distdir)/$$file" \ 713 || cp -p $$d/$$file "$(distdir)/$$file" \ 714 || exit 1; \ 715 fi; \ 716 done 717 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 718 if test "$$subdir" = .; then :; else \ 719 $(am__make_dryrun) \ 720 || test -d "$(distdir)/$$subdir" \ 721 || $(MKDIR_P) "$(distdir)/$$subdir" \ 722 || exit 1; \ 723 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 724 $(am__relativize); \ 725 new_distdir=$$reldir; \ 726 dir1=$$subdir; dir2="$(top_distdir)"; \ 727 $(am__relativize); \ 728 new_top_distdir=$$reldir; \ 729 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 730 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 731 ($(am__cd) $$subdir && \ 732 $(MAKE) $(AM_MAKEFLAGS) \ 733 top_distdir="$$new_top_distdir" \ 734 distdir="$$new_distdir" \ 735 am__remove_distdir=: \ 736 am__skip_length_check=: \ 737 am__skip_mode_fix=: \ 738 distdir) \ 739 || exit 1; \ 740 fi; \ 741 done 742check-am: all-am 743check: check-recursive 744all-am: Makefile 745installdirs: installdirs-recursive 746installdirs-am: 747install: install-recursive 748install-exec: install-exec-recursive 749install-data: install-data-recursive 750uninstall: uninstall-recursive 751 752install-am: all-am 753 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 754 755installcheck: installcheck-recursive 756install-strip: 757 if test -z '$(STRIP)'; then \ 758 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 759 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 760 install; \ 761 else \ 762 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 763 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 764 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 765 fi 766mostlyclean-generic: 767 768clean-generic: 769 770distclean-generic: 771 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 772 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 773 774maintainer-clean-generic: 775 @echo "This command is intended for maintainers to use" 776 @echo "it deletes files that may require special tools to rebuild." 777clang-tidy: clang-tidy-recursive 778 779clang-tidy-am: clang-tidy-local 780 781clean: clean-recursive 782 783clean-am: clean-generic clean-libtool mostlyclean-am 784 785distclean: distclean-recursive 786 -rm -f Makefile 787distclean-am: clean-am distclean-generic distclean-tags 788 789dvi: dvi-recursive 790 791dvi-am: 792 793html: html-recursive 794 795html-am: 796 797info: info-recursive 798 799info-am: 800 801install-data-am: 802 803install-dvi: install-dvi-recursive 804 805install-dvi-am: 806 807install-exec-am: 808 809install-html: install-html-recursive 810 811install-html-am: 812 813install-info: install-info-recursive 814 815install-info-am: 816 817install-man: 818 819install-pdf: install-pdf-recursive 820 821install-pdf-am: 822 823install-ps: install-ps-recursive 824 825install-ps-am: 826 827installcheck-am: 828 829maintainer-clean: maintainer-clean-recursive 830 -rm -f Makefile 831maintainer-clean-am: distclean-am maintainer-clean-generic 832 833mostlyclean: mostlyclean-recursive 834 835mostlyclean-am: mostlyclean-generic mostlyclean-libtool 836 837pdf: pdf-recursive 838 839pdf-am: 840 841ps: ps-recursive 842 843ps-am: 844 845uninstall-am: 846 847.MAKE: $(am__recursive_targets) install-am install-strip 848 849.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ 850 check-am clang-tidy-am clang-tidy-local clean clean-generic \ 851 clean-libtool cscopelist-am ctags ctags-am distclean \ 852 distclean-generic distclean-libtool distclean-tags distdir dvi \ 853 dvi-am html html-am info info-am install install-am \ 854 install-data install-data-am install-dvi install-dvi-am \ 855 install-exec install-exec-am install-html install-html-am \ 856 install-info install-info-am install-man install-pdf \ 857 install-pdf-am install-ps install-ps-am install-strip \ 858 installcheck installcheck-am installdirs installdirs-am \ 859 maintainer-clean maintainer-clean-generic mostlyclean \ 860 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 861 tags tags-am uninstall uninstall-am 862 863.PRECIOUS: Makefile 864 865 866# Tell versions [3.59,3.63) of GNU make to not export all variables. 867# Otherwise a system limit (for SysV at least) may be exceeded. 868.NOEXPORT: 869