1 /*
2  * jdmerge.c
3  *
4  * Copyright (C) 1994-1996, Thomas G. Lane.
5  * This file is part of the Independent JPEG Group's software.
6  * For conditions of distribution and use, see the accompanying README file.
7  *
8  * This file contains code for merged upsampling/color conversion.
9  *
10  * This file combines functions from jdsample.c and jdcolor.c;
11  * read those files first to understand what's going on.
12  *
13  * When the chroma components are to be upsampled by simple replication
14  * (ie, box filtering), we can save some work in color conversion by
15  * calculating all the output pixels corresponding to a pair of chroma
16  * samples at one time.  In the conversion equations
17  *	R = Y           + K1 * Cr
18  *	G = Y + K2 * Cb + K3 * Cr
19  *	B = Y + K4 * Cb
20  * only the Y term varies among the group of pixels corresponding to a pair
21  * of chroma samples, so the rest of the terms can be calculated just once.
22  * At typical sampling ratios, this eliminates half or three-quarters of the
23  * multiplications needed for color conversion.
24  *
25  * This file currently provides implementations for the following cases:
26  *	YCbCr => RGB color conversion only.
27  *	Sampling ratios of 2h1v or 2h2v.
28  *	No scaling needed at upsample time.
29  *	Corner-aligned (non-CCIR601) sampling alignment.
30  * Other special cases could be added, but in most applications these are
31  * the only common cases.  (For uncommon cases we fall back on the more
32  * general code in jdsample.c and jdcolor.c.)
33  */
34 
35 #define JPEG_INTERNALS
36 #include "jinclude.h"
37 #include "jpeglib.h"
38 
39 #ifdef UPSAMPLE_MERGING_SUPPORTED
40 
41 
42 /* Private subobject */
43 
44 typedef struct {
45   struct jpeg_upsampler pub;	/* public fields */
46 
47   /* Pointer to routine to do actual upsampling/conversion of one row group */
48   JMETHOD(void, upmethod, (j_decompress_ptr cinfo,
49 			   JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
50 			   JSAMPARRAY output_buf));
51 
52   /* Private state for YCC->RGB conversion */
53   int * Cr_r_tab;		/* => table for Cr to R conversion */
54   int * Cb_b_tab;		/* => table for Cb to B conversion */
55   JPEG_INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
56   JPEG_INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
57 
58   /* For 2:1 vertical sampling, we produce two output rows at a time.
59    * We need a "spare" row buffer to hold the second output row if the
60    * application provides just a one-row buffer; we also use the spare
61    * to discard the dummy last row if the image height is odd.
62    */
63   JSAMPROW spare_row;
64   wxjpeg_boolean spare_full;		/* T if spare buffer is occupied */
65 
66   JDIMENSION out_row_width;	/* samples per output row */
67   JDIMENSION rows_to_go;	/* counts rows remaining in image */
68 } my_upsampler;
69 
70 typedef my_upsampler * my_upsample_ptr;
71 
72 #define SCALEBITS	16	/* speediest right-shift on some machines */
73 #define ONE_HALF	((JPEG_INT32) 1 << (SCALEBITS-1))
74 #define FIX(x)		((JPEG_INT32) ((x) * (1L<<SCALEBITS) + 0.5))
75 
76 
77 /*
78  * Initialize tables for YCC->RGB colorspace conversion.
79  * This is taken directly from jdcolor.c; see that file for more info.
80  */
81 
82 LOCAL(void)
build_ycc_rgb_table(j_decompress_ptr cinfo)83 build_ycc_rgb_table (j_decompress_ptr cinfo)
84 {
85   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
86   int i;
87   JPEG_INT32 x;
88   SHIFT_TEMPS
89 
90   upsample->Cr_r_tab = (int *)
91     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
92 				(MAXJSAMPLE+1) * SIZEOF(int));
93   upsample->Cb_b_tab = (int *)
94     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
95 				(MAXJSAMPLE+1) * SIZEOF(int));
96   upsample->Cr_g_tab = (JPEG_INT32 *)
97     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
98 				(MAXJSAMPLE+1) * SIZEOF(JPEG_INT32));
99   upsample->Cb_g_tab = (JPEG_INT32 *)
100     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
101 				(MAXJSAMPLE+1) * SIZEOF(JPEG_INT32));
102 
103   for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
104     /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
105     /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
106     /* Cr=>R value is nearest int to 1.40200 * x */
107     upsample->Cr_r_tab[i] = (int)
108 		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
109     /* Cb=>B value is nearest int to 1.77200 * x */
110     upsample->Cb_b_tab[i] = (int)
111 		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
112     /* Cr=>G value is scaled-up -0.71414 * x */
113     upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
114     /* Cb=>G value is scaled-up -0.34414 * x */
115     /* We also add in ONE_HALF so that need not do it in inner loop */
116     upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
117   }
118 }
119 
120 
121 /*
122  * Initialize for an upsampling pass.
123  */
124 
125 METHODDEF(void)
start_pass_merged_upsample(j_decompress_ptr cinfo)126 start_pass_merged_upsample (j_decompress_ptr cinfo)
127 {
128   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
129 
130   /* Mark the spare buffer empty */
131   upsample->spare_full = FALSE;
132   /* Initialize total-height counter for detecting bottom of image */
133   upsample->rows_to_go = cinfo->output_height;
134 }
135 
136 
137 /*
138  * Control routine to do upsampling (and color conversion).
139  *
140  * The control routine just handles the row buffering considerations.
141  */
142 
143 METHODDEF(void)
merged_2v_upsample(j_decompress_ptr cinfo,JSAMPIMAGE input_buf,JDIMENSION * in_row_group_ctr,JDIMENSION in_row_groups_avail,JSAMPARRAY output_buf,JDIMENSION * out_row_ctr,JDIMENSION out_rows_avail)144 merged_2v_upsample (j_decompress_ptr cinfo,
145 		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
146 		    JDIMENSION in_row_groups_avail,
147 		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
148 		    JDIMENSION out_rows_avail)
149 /* 2:1 vertical sampling case: may need a spare row. */
150 {
151   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
152   JSAMPROW work_ptrs[2];
153   JDIMENSION num_rows;		/* number of rows returned to caller */
154 
155   if (upsample->spare_full) {
156     /* If we have a spare row saved from a previous cycle, just return it. */
157     jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0,
158 		      1, upsample->out_row_width);
159     num_rows = 1;
160     upsample->spare_full = FALSE;
161   } else {
162     /* Figure number of rows to return to caller. */
163     num_rows = 2;
164     /* Not more than the distance to the end of the image. */
165     if (num_rows > upsample->rows_to_go)
166       num_rows = upsample->rows_to_go;
167     /* And not more than what the client can accept: */
168     out_rows_avail -= *out_row_ctr;
169     if (num_rows > out_rows_avail)
170       num_rows = out_rows_avail;
171     /* Create output pointer array for upsampler. */
172     work_ptrs[0] = output_buf[*out_row_ctr];
173     if (num_rows > 1) {
174       work_ptrs[1] = output_buf[*out_row_ctr + 1];
175     } else {
176       work_ptrs[1] = upsample->spare_row;
177       upsample->spare_full = TRUE;
178     }
179     /* Now do the upsampling. */
180     (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs);
181   }
182 
183   /* Adjust counts */
184   *out_row_ctr += num_rows;
185   upsample->rows_to_go -= num_rows;
186   /* When the buffer is emptied, declare this input row group consumed */
187   if (! upsample->spare_full)
188     (*in_row_group_ctr)++;
189 }
190 
191 
192 METHODDEF(void)
merged_1v_upsample(j_decompress_ptr cinfo,JSAMPIMAGE input_buf,JDIMENSION * in_row_group_ctr,JDIMENSION in_row_groups_avail,JSAMPARRAY output_buf,JDIMENSION * out_row_ctr,JDIMENSION out_rows_avail)193 merged_1v_upsample (j_decompress_ptr cinfo,
194 		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
195 		    JDIMENSION in_row_groups_avail,
196 		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
197 		    JDIMENSION out_rows_avail)
198 /* 1:1 vertical sampling case: much easier, never need a spare row. */
199 {
200   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
201 
202   /* Just do the upsampling. */
203   (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr,
204 			 output_buf + *out_row_ctr);
205   /* Adjust counts */
206   (*out_row_ctr)++;
207   (*in_row_group_ctr)++;
208 }
209 
210 
211 /*
212  * These are the routines invoked by the control routines to do
213  * the actual upsampling/conversion.  One row group is processed per call.
214  *
215  * Note: since we may be writing directly into application-supplied buffers,
216  * we have to be honest about the output width; we can't assume the buffer
217  * has been rounded up to an even width.
218  */
219 
220 
221 /*
222  * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
223  */
224 
225 METHODDEF(void)
h2v1_merged_upsample(j_decompress_ptr cinfo,JSAMPIMAGE input_buf,JDIMENSION in_row_group_ctr,JSAMPARRAY output_buf)226 h2v1_merged_upsample (j_decompress_ptr cinfo,
227 		      JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
228 		      JSAMPARRAY output_buf)
229 {
230   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
231   register int y, cred, cgreen, cblue;
232   int cb, cr;
233   register JSAMPROW outptr;
234   JSAMPROW inptr0, inptr1, inptr2;
235   JDIMENSION col;
236   /* copy these pointers into registers if possible */
237   register JSAMPLE * range_limit = cinfo->sample_range_limit;
238   int * Crrtab = upsample->Cr_r_tab;
239   int * Cbbtab = upsample->Cb_b_tab;
240   JPEG_INT32 * Crgtab = upsample->Cr_g_tab;
241   JPEG_INT32 * Cbgtab = upsample->Cb_g_tab;
242   SHIFT_TEMPS
243 
244   inptr0 = input_buf[0][in_row_group_ctr];
245   inptr1 = input_buf[1][in_row_group_ctr];
246   inptr2 = input_buf[2][in_row_group_ctr];
247   outptr = output_buf[0];
248   /* Loop for each pair of output pixels */
249   for (col = cinfo->output_width >> 1; col > 0; col--) {
250     /* Do the chroma part of the calculation */
251     cb = GETJSAMPLE(*inptr1++);
252     cr = GETJSAMPLE(*inptr2++);
253     cred = Crrtab[cr];
254     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
255     cblue = Cbbtab[cb];
256     /* Fetch 2 Y values and emit 2 pixels */
257     y  = GETJSAMPLE(*inptr0++);
258     outptr[RGB_RED] =   range_limit[y + cred];
259     outptr[RGB_GREEN] = range_limit[y + cgreen];
260     outptr[RGB_BLUE] =  range_limit[y + cblue];
261     outptr += RGB_PIXELSIZE;
262     y  = GETJSAMPLE(*inptr0++);
263     outptr[RGB_RED] =   range_limit[y + cred];
264     outptr[RGB_GREEN] = range_limit[y + cgreen];
265     outptr[RGB_BLUE] =  range_limit[y + cblue];
266     outptr += RGB_PIXELSIZE;
267   }
268   /* If image width is odd, do the last output column separately */
269   if (cinfo->output_width & 1) {
270     cb = GETJSAMPLE(*inptr1);
271     cr = GETJSAMPLE(*inptr2);
272     cred = Crrtab[cr];
273     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
274     cblue = Cbbtab[cb];
275     y  = GETJSAMPLE(*inptr0);
276     outptr[RGB_RED] =   range_limit[y + cred];
277     outptr[RGB_GREEN] = range_limit[y + cgreen];
278     outptr[RGB_BLUE] =  range_limit[y + cblue];
279   }
280 }
281 
282 /*
283  * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
284  */
285 
286 METHODDEF(void)
h2v2_merged_upsample(j_decompress_ptr cinfo,JSAMPIMAGE input_buf,JDIMENSION in_row_group_ctr,JSAMPARRAY output_buf)287 h2v2_merged_upsample (j_decompress_ptr cinfo,
288 		      JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
289 		      JSAMPARRAY output_buf)
290 {
291   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
292   register int y, cred, cgreen, cblue;
293   int cb, cr;
294   register JSAMPROW outptr0, outptr1;
295   JSAMPROW inptr00, inptr01, inptr1, inptr2;
296   JDIMENSION col;
297   /* copy these pointers into registers if possible */
298   register JSAMPLE * range_limit = cinfo->sample_range_limit;
299   int * Crrtab = upsample->Cr_r_tab;
300   int * Cbbtab = upsample->Cb_b_tab;
301   JPEG_INT32 * Crgtab = upsample->Cr_g_tab;
302   JPEG_INT32 * Cbgtab = upsample->Cb_g_tab;
303   SHIFT_TEMPS
304 
305   inptr00 = input_buf[0][in_row_group_ctr*2];
306   inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
307   inptr1 = input_buf[1][in_row_group_ctr];
308   inptr2 = input_buf[2][in_row_group_ctr];
309   outptr0 = output_buf[0];
310   outptr1 = output_buf[1];
311   /* Loop for each group of output pixels */
312   for (col = cinfo->output_width >> 1; col > 0; col--) {
313     /* Do the chroma part of the calculation */
314     cb = GETJSAMPLE(*inptr1++);
315     cr = GETJSAMPLE(*inptr2++);
316     cred = Crrtab[cr];
317     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
318     cblue = Cbbtab[cb];
319     /* Fetch 4 Y values and emit 4 pixels */
320     y  = GETJSAMPLE(*inptr00++);
321     outptr0[RGB_RED] =   range_limit[y + cred];
322     outptr0[RGB_GREEN] = range_limit[y + cgreen];
323     outptr0[RGB_BLUE] =  range_limit[y + cblue];
324     outptr0 += RGB_PIXELSIZE;
325     y  = GETJSAMPLE(*inptr00++);
326     outptr0[RGB_RED] =   range_limit[y + cred];
327     outptr0[RGB_GREEN] = range_limit[y + cgreen];
328     outptr0[RGB_BLUE] =  range_limit[y + cblue];
329     outptr0 += RGB_PIXELSIZE;
330     y  = GETJSAMPLE(*inptr01++);
331     outptr1[RGB_RED] =   range_limit[y + cred];
332     outptr1[RGB_GREEN] = range_limit[y + cgreen];
333     outptr1[RGB_BLUE] =  range_limit[y + cblue];
334     outptr1 += RGB_PIXELSIZE;
335     y  = GETJSAMPLE(*inptr01++);
336     outptr1[RGB_RED] =   range_limit[y + cred];
337     outptr1[RGB_GREEN] = range_limit[y + cgreen];
338     outptr1[RGB_BLUE] =  range_limit[y + cblue];
339     outptr1 += RGB_PIXELSIZE;
340   }
341   /* If image width is odd, do the last output column separately */
342   if (cinfo->output_width & 1) {
343     cb = GETJSAMPLE(*inptr1);
344     cr = GETJSAMPLE(*inptr2);
345     cred = Crrtab[cr];
346     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
347     cblue = Cbbtab[cb];
348     y  = GETJSAMPLE(*inptr00);
349     outptr0[RGB_RED] =   range_limit[y + cred];
350     outptr0[RGB_GREEN] = range_limit[y + cgreen];
351     outptr0[RGB_BLUE] =  range_limit[y + cblue];
352     y  = GETJSAMPLE(*inptr01);
353     outptr1[RGB_RED] =   range_limit[y + cred];
354     outptr1[RGB_GREEN] = range_limit[y + cgreen];
355     outptr1[RGB_BLUE] =  range_limit[y + cblue];
356   }
357 }
358 
359 
360 /*
361  * Module initialization routine for merged upsampling/color conversion.
362  *
363  * NB: this is called under the conditions determined by use_merged_upsample()
364  * in jdmaster.c.  That routine MUST correspond to the actual capabilities
365  * of this module; no safety checks are made here.
366  */
367 
368 GLOBAL(void)
jinit_merged_upsampler(j_decompress_ptr cinfo)369 jinit_merged_upsampler (j_decompress_ptr cinfo)
370 {
371   my_upsample_ptr upsample;
372 
373   upsample = (my_upsample_ptr)
374     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
375 				SIZEOF(my_upsampler));
376   cinfo->upsample = (struct jpeg_upsampler *) upsample;
377   upsample->pub.start_pass = start_pass_merged_upsample;
378   upsample->pub.need_context_rows = FALSE;
379 
380   upsample->out_row_width = cinfo->output_width * cinfo->out_color_components;
381 
382   if (cinfo->max_v_samp_factor == 2) {
383     upsample->pub.upsample = merged_2v_upsample;
384     upsample->upmethod = h2v2_merged_upsample;
385     /* Allocate a spare row buffer */
386     upsample->spare_row = (JSAMPROW)
387       (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
388 		(size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
389   } else {
390     upsample->pub.upsample = merged_1v_upsample;
391     upsample->upmethod = h2v1_merged_upsample;
392     /* No spare row needed */
393     upsample->spare_row = NULL;
394   }
395 
396   build_ycc_rgb_table(cinfo);
397 }
398 
399 #endif /* UPSAMPLE_MERGING_SUPPORTED */
400