1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $ 4# 5# Build-time options are documented in make.conf(5). 6# 7# The intended user-driven targets are: 8# 9# buildworld - rebuild *everything*, including glue to help do upgrades 10# quickworld - skip the glue and do a depend+build on the meat 11# realquickworld - skip the glue and depend stages and just build the meat 12# crossworld - only build the glue (particularly the cross-build environment) 13# installworld- install everything built by "buildworld" 14# most - build user commands, no libraries or include files 15# installmost - install user commands, no libraries or include files 16# 17# Standard targets (not defined here) are documented in the makefiles in 18# /usr/share/mk. These include: 19# obj depend all install clean cleandepend cleanobj 20 21# Put initial settings here. 22SUBDIR= 23 24# We must do share/info early so that installation of info `dir' 25# entries works correctly. Do it first since it is less likely to 26# grow dependencies on include and lib than vice versa. 27.if exists(${.CURDIR}/share/info) 28SUBDIR+= share/info 29.endif 30 31# We must do include and lib early so that the perl *.ph generation 32# works correctly as it uses the header files installed by this. 33.if exists(${.CURDIR}/include) 34SUBDIR+= include 35.endif 36.if exists(${.CURDIR}/lib) 37SUBDIR+= lib 38.endif 39# This exists simply to ensure that the obj dir hierarchy is 40# intact for nrelease, allowing the nrelease Makefile's to 41# reference ${.OBJDIR}. 42# 43.if exists(${.CURDIR}/nrelease) 44SUBDIR+= nrelease 45.endif 46 47.if exists(${.CURDIR}/bin) 48SUBDIR+= bin 49.endif 50.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 51SUBDIR+= games 52.endif 53.if exists(${.CURDIR}/gnu) 54SUBDIR+= gnu 55.endif 56.if exists(${.CURDIR}/libexec) 57SUBDIR+= libexec 58.endif 59.if exists(${.CURDIR}/sbin) 60SUBDIR+= sbin 61.endif 62.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT) 63SUBDIR+= secure 64.endif 65.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 66SUBDIR+= share 67.endif 68.if exists(${.CURDIR}/sys) 69SUBDIR+= sys 70.endif 71.if exists(${.CURDIR}/usr.bin) 72SUBDIR+= usr.bin 73.endif 74.if exists(${.CURDIR}/usr.sbin) 75SUBDIR+= usr.sbin 76.endif 77 78.if exists(${.CURDIR}/etc) 79SUBDIR+= etc 80.endif 81 82# These are last, since it is nice to at least get the base system 83# rebuilt before you do them. 84.if defined(LOCAL_DIRS) 85.for _DIR in ${LOCAL_DIRS} 86.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 87SUBDIR+= ${_DIR} 88.endif 89.endfor 90.endif 91 92.if defined(SUBDIR_OVERRIDE) 93SUBDIR= ${SUBDIR_OVERRIDE} 94.endif 95 96.if defined(NOCLEANDIR) 97CLEANDIR= clean cleandepend 98.else 99CLEANDIR= cleandir 100.endif 101 102.if defined(NO_CLEAN) 103NOCLEAN= # defined 104.endif 105 106# Object directory base in primary make. Note that when we rerun make 107# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 108# subdirectory because the rest of the build system needs it that way. 109# The original object directory base is saved in OBJTREE. 110# 111MAKEOBJDIRPREFIX?= /usr/obj 112OBJTREE?= ${MAKEOBJDIRPREFIX} 113 114# Used for stage installs and pathing 115# 116DESTDIRBASE?= ${OBJTREE}${.CURDIR} 117 118# Remove DESTDIR from MAKEFLAGS. It is present in the environment 119# anyhow, and we need to be able to override it for stage installs 120.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*} 121 122# This sets the compiler we use to build the world/kernel with 123WORLD_CCVER?= gcc41 124 125TARGET_ARCH?= ${MACHINE_ARCH} 126.if ${TARGET_ARCH} == ${MACHINE_ARCH} 127TARGET?= ${MACHINE} 128.else 129TARGET?= ${TARGET_ARCH} 130.endif 131.if make(buildworld) 132BUILD_ARCH!= sysctl -n hw.machine_arch 133.if ${MACHINE_ARCH} != ${BUILD_ARCH} 134.error To cross-build, set TARGET_ARCH. 135.endif 136.endif 137 138# Backwards compatibility with older make's or older sys.mk's. make 139# is expected to define MACHINE_PLATFORM. 140# 141.if !defined(MACHINE_PLATFORM) 142MACHINE_PLATFORM= pc32 143.endif 144 145# XXX this is ugly and we need to come up with a nicer solution 146.if !defined(TARGET_PLATFORM) 147.if ${TARGET_ARCH} == "i386" 148TARGET_PLATFORM= pc32 149.elif ${TARGET_ARCH} == "amd64" 150TARGET_PLATFORM= pc64 151.else 152.error Unknown target architecture. 153.endif 154.endif 155 156THREAD_LIB?= thread_xu 157.if ${THREAD_LIB} == "c_r" 158.if defined(NO_LIBC_R) 159.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined 160.endif 161.endif 162 163# BTOOLS (Natively built) All non-cross-development tools that the 164# main build needs. This includes things like 'mkdir' and 'rm'. 165# We will not use the native system's exec path once we start 166# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 167# 168# CTOOLS (Natively built) Cross development tools which are specific 169# to the target architecture. 170# 171# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 172# CTOOLS. 173# 174# MACHINE_PLATFORM Platform Architecture we are building on 175# MACHINE Machine Architecture (usually the same as MACHINE_ARCH) 176# MACHINE_ARCH Cpu Architecture we are building on 177# 178# TARGET_PLATFORM Platform Architecture we are building for 179# TARGET Machine Architecture we are building for 180# TARGET_ARCH Cpu Architecture we are building for 181# 182BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 183CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 184WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 185 186# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 187# cross-tools stages to augment the existing command path to access newer 188# versions of certain utilities such as 'patch' that the cross-tools stage 189# might expect. 190# 191BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 192 193# The strict temporary command path contains all binaries required 194# by the buildworld system after the cross-tools stage. 195# 196STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 197 198TMPDIR?= /tmp 199TMPPID!= echo $$$$ 200 201# 202# Building a world goes through the following stages 203# 204# 1. bootstrap-tool stage [BMAKE] 205# This stage is responsible for creating programs that 206# are needed for backward compatibility reasons. They 207# are not built as cross-tools. 208# 2. build-tool stage [TMAKE] 209# This stage is responsible for creating the object 210# tree and building any tools that are needed during 211# the build process. 212# 3. cross-tool stage [XMAKE] 213# This stage is responsible for creating any tools that 214# are needed for cross-builds. A cross-compiler is one 215# of them. 216# 4. world stage [WMAKE] 217# This stage actually builds the world. 218# 5. install stage (optional) [IMAKE] 219# This stage installs a previously built world. 220# 221 222# bootstrap-tool stage 223# 224BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 225 OBJTREE=${OBJTREE} \ 226 DESTDIR=${BTOOLSDEST} \ 227 PATH=${BTOOLSPATH}:${PATH} \ 228 INSTALL="sh ${.CURDIR}/tools/install.sh" 229 230BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 231 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 232 -DNO_WERROR -DNO_NLS 233 234# build-tool stage 235# 236TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 237 OBJTREE=${OBJTREE} \ 238 DESTDIR= \ 239 PATH=${BTOOLSPATH}:${PATH} \ 240 INSTALL="sh ${.CURDIR}/tools/install.sh" 241 242TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 243 -DNO_FORTRAN -DNOSHARED 244 245# cross-tool stage 246# 247# note: TOOLS_PREFIX points to the obj root holding the cross 248# compiler binaries, while USRDATA_PREFIX points to the obj root 249# holding the target environment (and also determines where cross-built 250# libraries, crt*.o, and include files are installed). 251# 252XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 253 OBJTREE=${OBJTREE} \ 254 DESTDIR=${CTOOLSDEST} \ 255 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 256 TOOLS_PREFIX=${CTOOLSDEST} \ 257 USRDATA_PREFIX=${WORLDDEST} \ 258 PATH=${BTOOLSPATH}:${PATH} 259 260XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \ 261 -DBOOTSTRAPPING -DNOSHARED 262 263# world stage, note the strict path and note that TOOLS_PREFIX is left 264# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 265# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 266# for both binary and library paths, even though it is being compiled to 267# WORLDDEST. None of the programs in the world stage are ever actually 268# executed during the buildworld/installworld. 269# 270CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 271 OBJTREE=${OBJTREE} \ 272 MACHINE_ARCH=${TARGET_ARCH} \ 273 MACHINE=${TARGET} \ 274 MACHINE_PLATFORM=${TARGET_PLATFORM} \ 275 OBJFORMAT_PATH=${CTOOLSDEST} \ 276 HOST_CCVER=${HOST_CCVER} \ 277 CCVER=${WORLD_CCVER} 278 279WMAKEENV= ${CROSSENV} \ 280 DESTDIR=${WORLDDEST} \ 281 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 282 PATH=${STRICTTMPPATH} 283 284WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 285 286# install stage 287# 288IMAKEENV= ${CROSSENV} \ 289 PATH=${STRICTTMPPATH} 290IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 291 292# kernel stage 293# 294KMAKEENV= ${WMAKEENV} 295 296# buildworld 297# 298# Attempt to rebuild the entire system, with reasonable chance of 299# success, regardless of how old your existing system is. 300# 301_worldtmp: 302 @echo 303 @echo "--------------------------------------------------------------" 304 @echo ">>> Rebuilding the temporary build tree" 305 @echo "--------------------------------------------------------------" 306.if !defined(NOCLEAN) 307 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 308.else 309 # XXX - These two can depend on any header file. 310 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 311 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 312.endif 313 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 314.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 315 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 316 -p ${_dir}/ > /dev/null 317 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 318 -p ${_dir}/usr > /dev/null 319.endfor 320 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 321 -p ${WORLDDEST}/usr/include > /dev/null 322 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 323 324_bootstrap-tools: 325 @echo 326 @echo "--------------------------------------------------------------" 327 @echo ">>> stage 1: bootstrap tools" 328 @echo "--------------------------------------------------------------" 329 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 330_cleanobj: 331 @echo 332 @echo "--------------------------------------------------------------" 333 @echo ">>> stage 2a: cleaning up the object tree" 334 @echo "--------------------------------------------------------------" 335 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 336_obj: 337 @echo 338 @echo "--------------------------------------------------------------" 339 @echo ">>> stage 2b: rebuilding the object tree" 340 @echo "--------------------------------------------------------------" 341 cd ${.CURDIR}; ${WMAKE} par-obj 342_build-tools: 343 @echo 344 @echo "--------------------------------------------------------------" 345 @echo ">>> stage 2c: build tools" 346 @echo "--------------------------------------------------------------" 347 cd ${.CURDIR}; ${TMAKE} build-tools 348_cross-tools: 349 @echo 350 @echo "--------------------------------------------------------------" 351 @echo ">>> stage 3: cross tools" 352 @echo "--------------------------------------------------------------" 353 cd ${.CURDIR}; ${XMAKE} cross-tools 354_includes: 355 @echo 356 @echo "--------------------------------------------------------------" 357 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 358 @echo "--------------------------------------------------------------" 359 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 360_libraries: 361 @echo 362 @echo "--------------------------------------------------------------" 363 @echo ">>> stage 4b: building libraries" 364 @echo "--------------------------------------------------------------" 365 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 366_depend: 367 @echo 368 @echo "--------------------------------------------------------------" 369 @echo ">>> stage 4c: make dependencies" 370 @echo "--------------------------------------------------------------" 371 cd ${.CURDIR}; ${WMAKE} par-depend 372everything: 373 @echo 374 @echo "--------------------------------------------------------------" 375 @echo ">>> stage 4d: building everything.." 376 @echo "--------------------------------------------------------------" 377 cd ${.CURDIR}; ${WMAKE} all 378 379# note: buildworld no longer depends on _cleanobj because we rm -rf the 380# entire object tree and built the bootstrap tools in a different location. 381# 382# buildworld - build everything from scratch 383# quickworld - skip the bootstrap, build, and cross-build steps 384# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 385# 386# note: we include _obj in realquickworld to prevent accidental creation 387# of files in /usr/src. 388 389WMAKE_TGTS= 390.if !defined(SUBDIR_OVERRIDE) 391WMAKE_TGTS+= _worldtmp _bootstrap-tools 392.endif 393WMAKE_TGTS+= _obj _build-tools 394.if !defined(SUBDIR_OVERRIDE) 395WMAKE_TGTS+= _cross-tools 396.endif 397WMAKE_TGTS+= _includes _libraries _depend everything 398 399buildworld: ${WMAKE_TGTS} 400 401quickworld: _obj _includes _libraries _depend everything 402 403realquickworld: _obj _includes _libraries everything 404 405crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 406 407.ORDER: ${WMAKE_TGTS} 408.ORDER: _obj _includes 409 410# 411# installcheck 412# 413# Checks to be sure system is ready for installworld 414# 415installcheck: 416.if !defined(NO_SENDMAIL) 417 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 418 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 419.endif 420 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 421 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1) 422 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 423.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 424 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac 425.endif 426# 427# installworld 428# 429# Installs everything compiled by a 'buildworld'. 430# 431installworld: installcheck 432 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 433 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/ 434 435# 436# reinstall 437# 438# If you have a build server, you can NFS mount the source and obj directories 439# and do a 'make reinstall' on the *client* to install new binaries from the 440# most recent server build. 441# 442reinstall: 443 @echo "--------------------------------------------------------------" 444 @echo ">>> Making hierarchy" 445 @echo "--------------------------------------------------------------" 446 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 447 @echo 448 @echo "--------------------------------------------------------------" 449 @echo ">>> Installing everything.." 450 @echo "--------------------------------------------------------------" 451 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 452.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 453 @echo 454 @echo "--------------------------------------------------------------" 455 @echo ">>> Rebuilding man page indices" 456 @echo "--------------------------------------------------------------" 457 cd ${.CURDIR}/share/man; ${MAKE} makedb 458.endif 459 460# 461# buildkernel, nativekernel, quickkernel, and installkernel 462# 463# Which kernels to build and/or install is specified by setting 464# KERNCONF. If not defined a GENERIC kernel is built/installed. 465# Only the existing (depending TARGET) config files are used 466# for building kernels and only the first of these is designated 467# as the one being installed. 468# 469# You can specify INSTALLSTRIPPED=1 if you wish the installed 470# kernel and modules to be stripped of its debug info (required 471# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 472# if you only want to strip the modules of their debug info. These 473# only apply if you have DEBUG=-g in your kernel config or make line. 474# 475# Note that we have to use TARGET instead of TARGET_ARCH when 476# we're in kernel-land. Since only TARGET_ARCH is (expected) to 477# be set to cross-build, we have to make sure TARGET is set 478# properly. 479 480.if !defined(KERNCONF) && defined(KERNEL) 481KERNCONF= ${KERNEL} 482KERNWARN= yes 483.else 484KERNCONF?= GENERIC 485.endif 486INSTKERNNAME?= kernel 487 488KRNLSRCDIR= ${.CURDIR}/sys 489KRNLCONFDIR= ${KRNLSRCDIR}/config 490KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 491KERNCONFDIR?= ${KRNLCONFDIR} 492 493BUILDKERNELS= 494INSTALLKERNEL= 495.for _kernel in ${KERNCONF} 496.if exists(${KERNCONFDIR}/${_kernel}) 497BUILDKERNELS+= ${_kernel} 498.if empty(INSTALLKERNEL) 499INSTALLKERNEL= ${_kernel} 500.endif 501.endif 502.endfor 503 504# kernel version numbers survive rm -rf 505# 506.for _kernel in ${BUILDKERNELS} 507.if exists(${KRNLOBJDIR}/${_kernel}/version) 508KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 509.endif 510.endfor 511 512# 513# buildkernel 514# 515# Builds all kernels defined by BUILDKERNELS. 516# 517bk_tools: 518 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 519 echo "You must buildworld before buildkernel. If you wish"; \ 520 echo "to build a kernel using native tools, config it manually"; \ 521 echo "or use the nativekernel target if you are in a rush"; \ 522 exit 1; \ 523 fi 524 525maybe_bk_tools: 526.for _kernel in ${BUILDKERNELS} 527 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 528 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 529 echo "The kernel was build using buildworld tools which no" ; \ 530 echo "longer appear to exist, quickkernel failed!" ; \ 531 exit 1; \ 532 fi; \ 533 fi 534.endfor 535 536bk_build_list: 537.if empty(BUILDKERNELS) 538 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})." 539 @echo ">>> Did you move your kernel configs from i386/conf to config/?" 540 @false 541.endif 542 543bk_kernwarn: 544.if defined(KERNWARN) 545 @echo "--------------------------------------------------------------" 546 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 547 @echo "--------------------------------------------------------------" 548 @sleep 3 549.endif 550 @echo 551 552# The buildkernel target rebuilds the specified kernels from scratch 553# using the crossbuild tools generated by the last buildworld. It is 554# the safest (but also the most time consuming) way to build a new kernel. 555# 556buildkernel: bk_tools bk_build_list bk_kernwarn 557.for _kernel in ${BUILDKERNELS} 558 @echo "--------------------------------------------------------------" 559 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 560 @echo "--------------------------------------------------------------" 561 @echo "===> ${_kernel}" 562.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 563 rm -rf ${KRNLOBJDIR}/${_kernel} 564.else 565 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 566 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 567 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 568.endif 569 mkdir -p ${KRNLOBJDIR} 570.if !defined(NO_KERNELCONFIG) 571 cd ${KRNLCONFDIR}; \ 572 PATH=${STRICTTMPPATH} \ 573 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 574 ${KERNCONFDIR}/${_kernel} 575.endif 576.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 577 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 578.endif 579 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 580.if !defined(NO_KERNELDEPEND) 581 cd ${KRNLOBJDIR}/${_kernel}; \ 582 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend 583.endif 584 cd ${KRNLOBJDIR}/${_kernel}; \ 585 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 586 @echo "--------------------------------------------------------------" 587 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 588 @echo "--------------------------------------------------------------" 589.endfor 590 591# The nativekernel target rebuilds the specified kernels from scratch 592# using the system's standard compiler rather than using the crossbuild 593# tools generated by the last buildworld. This is fairly safe if your 594# system is reasonable up-to-date. 595# 596nativekernel: bk_build_list bk_kernwarn 597.for _kernel in ${BUILDKERNELS} 598 @echo "--------------------------------------------------------------" 599 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 600 @echo "--------------------------------------------------------------" 601 @echo "===> ${_kernel}" 602.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 603 rm -rf ${KRNLOBJDIR}/${_kernel} 604.else 605 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 606 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 607 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 608.endif 609 mkdir -p ${KRNLOBJDIR} 610.if !defined(NO_KERNELCONFIG) 611 cd ${KRNLCONFDIR}; \ 612 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 613 ${KERNCONFDIR}/${_kernel} 614.endif 615.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 616 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 617.endif 618 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 619 cd ${KRNLOBJDIR}/${_kernel}; \ 620 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \ 621 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile 622.if !defined(NO_KERNELDEPEND) 623 cd ${KRNLOBJDIR}/${_kernel}; \ 624 ${MAKE} KERNEL=${INSTKERNNAME} depend 625.endif 626 cd ${KRNLOBJDIR}/${_kernel}; \ 627 ${MAKE} KERNEL=${INSTKERNNAME} all 628 @echo "--------------------------------------------------------------" 629 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 630 @echo "--------------------------------------------------------------" 631.endfor 632 633# The quickkernel target rebuilds the specified kernels as quickly 634# as possible. It will use the native tools or the buildworld cross tools 635# based on whether the kernel was originally generated via buildkernel or 636# nativekernel. Config is rerun but the object hierarchy is not rebuilt, 637# nor is the make depend step run. 638# 639quickkernel: maybe_bk_tools bk_build_list bk_kernwarn 640.for _kernel in ${BUILDKERNELS} 641 @echo "--------------------------------------------------------------" 642 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 643 @echo "--------------------------------------------------------------" 644 @echo "===> ${_kernel}" 645.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 646.if !defined(NO_KERNELCONFIG) 647 cd ${KRNLCONFDIR}; \ 648 PATH=${STRICTTMPPATH} \ 649 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 650 ${KERNCONFDIR}/${_kernel} 651.endif 652 cd ${KRNLOBJDIR}/${_kernel}; \ 653 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 654.else 655.if !defined(NO_KERNELCONFIG) 656 cd ${KRNLCONFDIR}; \ 657 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 658 ${KERNCONFDIR}/${_kernel} 659.endif 660 cd ${KRNLOBJDIR}/${_kernel}; \ 661 ${MAKE} KERNEL=${INSTKERNNAME} all 662.endif 663 @echo "--------------------------------------------------------------" 664 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 665 @echo "--------------------------------------------------------------" 666.endfor 667 668 669# installkernel 670# 671# Install the kernel defined by INSTALLKERNEL 672# 673installkernel reinstallkernel: 674 @echo "--------------------------------------------------------------" 675 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`" 676 @echo "--------------------------------------------------------------" 677.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run) 678 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 679 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 680.else 681 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 682 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 683.endif 684 685# 686# most 687# 688# Build most of the user binaries on the existing system libs and includes. 689# 690most: 691 @echo "--------------------------------------------------------------" 692 @echo ">>> Building programs only" 693 @echo "--------------------------------------------------------------" 694.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 695 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 696.endfor 697 698# 699# installmost 700# 701# Install the binaries built by the 'most' target. This does not include 702# libraries or include files. 703# 704installmost: 705 @echo "--------------------------------------------------------------" 706 @echo ">>> Installing programs only" 707 @echo "--------------------------------------------------------------" 708.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 709 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 710.endfor 711 712# 713# ------------------------------------------------------------------------ 714# 715# From here onwards are utility targets used by the 'make world' and 716# related targets. If your 'world' breaks, you may like to try to fix 717# the problem and manually run the following targets to attempt to 718# complete the build. Beware, this is *not* guaranteed to work, you 719# need to have a pretty good grip on the current state of the system 720# to attempt to manually finish it. If in doubt, 'make world' again. 721# 722 723# bootstrap-tools: Build all tools required to build all tools. Note that 724# order is important in a number of cases and also note that the bootstrap 725# and build tools stages have access to earlier binaries they themselves 726# had generated. 727# 728# patch: older patch's do not have -i. This program must be built 729# first so other bootstrap tools that need to apply patches 730# can use it. 731# [x]install: dependancies on various new install features 732# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 733# envs are not compatible with older objformat binaries. 734# 735.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 736_strfile= games/fortune/strfile 737.endif 738 739bootstrap-tools: 740 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 741.for _tool in ${_strfile} \ 742 usr.bin/patch \ 743 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \ 744 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \ 745 bin/hostname bin/kill \ 746 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \ 747 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \ 748 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \ 749 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 750 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 751 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \ 752 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \ 753 usr.bin/cap_mkdb usr.bin/true usr.bin/false \ 754 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \ 755 usr.bin/tail \ 756 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 757 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \ 758 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \ 759 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb 760 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 761 cd ${.CURDIR}/${_tool}; \ 762 ${MAKE} DIRPRFX=${_tool}/ obj; \ 763 ${MAKE} DIRPRFX=${_tool}/ depend; \ 764 ${MAKE} DIRPRFX=${_tool}/ all; \ 765 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 766.endfor 767 touch ${BTOOLSDEST}/.bootstrap_done 768 769# build-tools: Build special purpose build tools. 770# 771# XXX we may be able to remove or consolidate this into bootstrap-tools 772# now that we have the native helper (.nx/.no) infrastructure. 773# 774.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 775_share= share/syscons/scrnmaps 776.endif 777 778_gcc41_cross= gnu/usr.bin/cc41 779_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools 780.if !defined(NO_GCC44) 781_gcc44_cross= gnu/usr.bin/cc44 782_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools 783.endif 784_custom_cross= libexec/customcc 785_binutils= gnu/usr.bin/binutils217 786 787build-tools: 788.for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share} 789 ${ECHODIR} "===> ${_tool} (build-tools)"; \ 790 cd ${.CURDIR}/${_tool}; \ 791 ${MAKE} DIRPRFX=${_tool}/ obj; \ 792 ${MAKE} DIRPRFX=${_tool}/ depend; \ 793 ${MAKE} DIRPRFX=${_tool}/ all; \ 794 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 795.endfor 796 touch ${BTOOLSDEST}/.build_done 797 798# 799# cross-tools: Build cross-building tools 800# 801.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 802_btxld= usr.sbin/btxld 803.endif 804 805cross-tools: 806.for _tool in ${_btxld} ${_binutils} \ 807 usr.bin/objformat \ 808 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross} 809 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 810 cd ${.CURDIR}/${_tool}; \ 811 ${MAKE} DIRPRFX=${_tool}/ obj; \ 812 ${MAKE} DIRPRFX=${_tool}/ depend; \ 813 ${MAKE} DIRPRFX=${_tool}/ all; \ 814 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 815.endfor 816 touch ${CTOOLSDEST}/.cross_done 817 818# 819# hierarchy - ensure that all the needed directories are present 820# 821hierarchy: 822 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 823 824# 825# libraries - build all libraries, and install them under ${DESTDIR}. 826# 827# The list of libraries with dependents (${_prebuild_libs}) and their 828# interdependencies (__L) are built automatically by the 829# ${.CURDIR}/tools/make_libdeps.sh script. 830# 831# .makeenv does not work when bootstrapping from 4.x, so we must be sure 832# to specify the correct CCVER or 'cc' will not exec the correct compiler. 833# 834libraries: 835 cd ${.CURDIR}; \ 836 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \ 837 ${MAKE} -f Makefile.inc1 _startup_libs41; 838.if !defined(NO_GCC44) 839 cd ${.CURDIR}; \ 840 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \ 841 ${MAKE} -f Makefile.inc1 _startup_libs44; 842.endif 843 cd ${.CURDIR}; \ 844 ${MAKE} -f Makefile.inc1 _startup_libs; \ 845 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 846 ${MAKE} -f Makefile.inc1 _generic_libs; 847 touch ${WORLDDEST}/.libraries_done 848 849# These dependencies are not automatically generated: 850# 851# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all 852# shared libraries for ELF. The target for _startup_libsXX is 853# specifically built using gccXX. 854# 855_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc 856_startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc 857_startup_libs= lib/csu lib/libc lib/libc_rtld 858 859_prebuild_libs= lib/libbz2 lib/libz 860_prebuild_libs+= lib/libutil 861 862_generic_libs= gnu/lib 863 864_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \ 865 lib/libncurses/libncurses lib/libopie lib/libradius \ 866 lib/libsbuf lib/libtacplus lib/libm \ 867 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} 868 869lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 870 871_generic_libs+= lib 872 873.if !defined(NO_CRYPT) 874.if !defined(NO_OPENSSL) 875_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 876.if !defined(NO_OPENSSH) 877_prebuild_libs+= secure/lib/libssh 878secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 879.endif 880.endif 881_generic_libs+= secure/lib 882.endif 883 884_generic_libs+= usr.bin/lex/lib 885 886.for _lib in ${_startup_libs41} ${_startup_libs44} \ 887 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 888${_lib}__L: .PHONY 889.if exists(${.CURDIR}/${_lib}) 890 ${ECHODIR} "===> ${_lib}"; \ 891 cd ${.CURDIR}/${_lib}; \ 892 ${MAKE} DIRPRFX=${_lib}/ depend; \ 893 ${MAKE} DIRPRFX=${_lib}/ all; \ 894 ${MAKE} DIRPRFX=${_lib}/ install 895.endif 896.endfor 897 898_startup_libs: ${_startup_libs:S/$/__L/} 899_startup_libs41: ${_startup_libs41:S/$/__L/} 900_startup_libs44: ${_startup_libs44:S/$/__L/} 901_prebuild_libs: ${_prebuild_libs:S/$/__L/} 902_generic_libs: ${_generic_libs:S/$/__L/} 903 904# library targets must be ordered because there are inter-library 905# races (e.g. generation of tconfig.h) 906# 907.ORDER: ${_startup_libs41:S/$/__L/} 908.ORDER: ${_startup_libs44:S/$/__L/} 909.ORDER: ${_startup_libs:S/$/__L/} 910.ORDER: ${_prebuild_libs:S/$/__L/} 911.ORDER: ${_generic_libs:S/$/__L/} 912 913.for __target in clean cleandepend cleandir obj depend includes 914.for entry in ${SUBDIR} 915${entry}.${__target}__D: .PHONY 916 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 917 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 918 edir=${entry}.${MACHINE_ARCH}; \ 919 cd ${.CURDIR}/$${edir}; \ 920 else \ 921 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 922 edir=${entry}; \ 923 cd ${.CURDIR}/$${edir}; \ 924 fi; \ 925 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 926.endfor 927par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 928.ORDER: ${SUBDIR:S/$/.${__target}__D/} 929.endfor 930.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 931 932# The wmake target is used by /usr/bin/wmake to run make in a 933# world build environment. 934# 935wmake: 936 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}' 937 938wmakeenv: 939 @echo '${WMAKEENV} /bin/sh' 940 941bmake: 942 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}' 943 944bmakeenv: 945 @echo '${BMAKEENV} /bin/sh' 946 947tmake: 948 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}' 949 950tmakeenv: 951 @echo '${TMAKEENV} /bin/sh' 952 953xmake: 954 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}' 955 956xmakeenv: 957 @echo '${XMAKEENV} /bin/sh' 958 959.include <bsd.subdir.mk> 960 961