1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# 4# This file defines the user-driven targets. 5# 6# Standard targets are documented in the makefiles in /usr/share/mk and include: 7# obj depend all install clean cleandepend cleanobj 8# 9# Build-time options are documented in make.conf(5). 10# 11 12DFLYVERSION!= awk '/^\#define[[:blank:]]__DragonFly_version/ {print $$3}' \ 13 < ${.CURDIR}/sys/sys/param.h 14 15OSREL!= echo ${DFLYVERSION} | \ 16 awk '{a=int($$1/100000); b=int(($$1-(a*100000))/100); \ 17 print a "." b}' 18 19# Put initial settings here. 20SUBDIR= 21 22# /libexec/ld-elf.so.2 needs to be installed first 23# Otherwise, install(1) beeing a dynamically linked binary will fail 24# during the first upgrade from a static to a dynamic world 25SUBDIR+= libexec 26 27# We need to do include and lib early. 28# 29SUBDIR+= include 30SUBDIR+= lib 31 32SUBDIR+= bin 33.if !defined(NO_GAMES) 34SUBDIR+= games 35.endif 36SUBDIR+= gnu 37SUBDIR+= sbin 38.if !defined(NO_SHARE) 39SUBDIR+= share 40.endif 41SUBDIR+= stand 42SUBDIR+= sys 43SUBDIR+= usr.bin 44SUBDIR+= usr.sbin 45 46SUBDIR+= etc 47 48# These are last, since it is nice to at least get the base system 49# rebuilt before you do them. 50.if defined(LOCAL_DIRS) 51.for _DIR in ${LOCAL_DIRS} 52.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 53SUBDIR+= ${_DIR} 54.endif 55.endfor 56.endif 57 58.if defined(SUBDIR_OVERRIDE) 59SUBDIR= ${SUBDIR_OVERRIDE} 60.endif 61 62.if defined(NOCLEANDIR) 63CLEANDIR= clean cleandepend 64.else 65CLEANDIR= cleandir 66.endif 67 68.if defined(NO_CLEAN) 69NOCLEAN= # defined 70.endif 71 72# Object directory base in primary make. Note that when we rerun make 73# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 74# subdirectory because the rest of the build system needs it that way. 75# The original object directory base is saved in OBJTREE. 76# 77MAKEOBJDIRPREFIX?= /usr/obj 78OBJTREE?= ${MAKEOBJDIRPREFIX} 79 80# Used for stage installs and pathing 81# 82DESTDIRBASE:= ${OBJTREE}${.CURDIR} 83 84# Remove DESTDIR from MAKEFLAGS. It is present in the environment 85# anyhow, and we need to be able to override it for stage installs 86.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*} 87 88# This section sets the tools used to build the world/kernel 89WORLD_CCVER?= gcc80 90WORLD_LDVER?= ld.bfd 91WORLD_BINUTILSVER?= binutils234 92 93.if !defined(NO_BACKUP) 94# Set the backup parameters if they are not already defined 95# 96WORLD_BACKUP?= /var/backups/world_backup 97AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR} 98.endif 99 100TARGET_ARCH?= ${MACHINE_ARCH} 101.if ${TARGET_ARCH} == ${MACHINE_ARCH} 102TARGET?= ${MACHINE} 103.else 104TARGET?= ${TARGET_ARCH} 105.endif 106.if make(buildworld) 107BUILD_ARCH!= sysctl -n hw.machine_arch 108 109# temporary until everybody has converted to x86_64 110.if ${BUILD_ARCH} == "amd64" 111BUILD_ARCH= x86_64 112.endif 113 114.if ${MACHINE_ARCH} != ${BUILD_ARCH} 115.error To cross-build, set TARGET_ARCH. 116.endif 117.endif 118 119# XXX this is ugly and we need to come up with a nicer solution 120.if !defined(TARGET_PLATFORM) 121.if ${TARGET_ARCH} == "x86_64" 122TARGET_PLATFORM= pc64 123.else 124.error Unknown target architecture. 125.endif 126.endif 127 128THREAD_LIB?= thread_xu 129 130# BTOOLS (Natively built) All non-cross-development tools that the 131# main build needs. This includes things like 'mkdir' and 'rm'. 132# We will not use the native system's exec path once we start 133# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 134# 135# CTOOLS (Natively built) Cross development tools which are specific 136# to the target architecture. 137# 138# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 139# CTOOLS. 140# 141# MACHINE_PLATFORM Platform Architecture we are building on 142# MACHINE Machine Architecture (usually the same as MACHINE_ARCH) 143# MACHINE_ARCH CPU Architecture we are building on 144# 145# TARGET_PLATFORM Platform Architecture we are building for 146# TARGET Machine Architecture we are building for 147# TARGET_ARCH CPU Architecture we are building for 148# 149BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 150CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 151WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 152 153# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 154# cross-tools stages to augment the existing command path to access newer 155# versions of certain utilities that the cross-tools stage might expect. 156# 157BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/sbin:${BTOOLSDEST}/bin 158 159# The cross-tools path containing the cross-tools to cross build the 160# ultimate world. 161# 162CTOOLSPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/sbin:${CTOOLSDEST}/bin 163 164# The strict temporary command path contains all binaries required 165# by the buildworld system after the cross-tools stage. 166# 167# NOTE: Append '/usr/local/bin:/usr/pkg/bin' to support external compilers. 168# See compilers.conf(5) man page for more info. 169# 170STRICTTMPPATH= ${CTOOLSPATH}:${BTOOLSPATH}:/usr/local/bin:/usr/pkg/bin 171 172TMPDIR?= /tmp 173TMPPID!= echo $$$$ 174 175# 176# Building a world goes through the following stages 177# 178# 1. bootstrap-tool stage [BMAKE] 179# This stage is responsible for creating programs that 180# are needed for backward compatibility reasons. They 181# are not built as cross-tools. 182# 2. build-tool stage [TMAKE] 183# This stage is responsible for creating the object 184# tree and building any tools that are needed during 185# the build process. 186# 3. cross-tool stage [XMAKE] 187# This stage is responsible for creating any tools that 188# are needed for cross-builds. A cross-compiler is one 189# of them. 190# 4. world stage [WMAKE] 191# This stage actually builds the world. 192# 5. install stage (optional) [IMAKE] 193# This stage installs a previously built world. 194# 195# In all cases we must carefully adjust the environment so the proper 196# tools and header files are used. 197# 198# NOTE: The M4 environment variable is used by the [f]lex binary to 199# override the location of the 'm4' binary. The override is 200# needed for certain buildworld version transitions, specifically 201# past a certain point in 3.3 because the older /usr/bin/m4 will 202# generate output that will blow up the newer [f]lex/yacc/bison 203# utilities. 204# 205 206# bootstrap-tool stage 207# 208BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 209 OBJTREE=${OBJTREE} \ 210 DESTDIR=${BTOOLSDEST} \ 211 LC_ALL=C \ 212 _SHLIBDIRPREFIX=${BTOOLSDEST} \ 213 PATH=${BTOOLSPATH}:${PATH} \ 214 M4=${BTOOLSDEST}/usr/bin/m4 \ 215 INSTALL="sh ${.CURDIR}/tools/install.sh" 216 217BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \ 218 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 219 -DNO_WERROR -DNO_NLS -DSYSBUILD 220 221# build-tool stage 222# 223TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 224 OBJTREE=${OBJTREE} \ 225 DESTDIR= \ 226 LC_ALL=C \ 227 PATH=${BTOOLSPATH}:${PATH} \ 228 M4=${BTOOLSDEST}/usr/bin/m4 \ 229 INSTALL="sh ${.CURDIR}/tools/install.sh" 230 231TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \ 232 -DNOSHARED -DSYSBUILD 233 234# cross-tool stage 235# 236# note: TOOLS_PREFIX points to the obj root holding the cross 237# compiler binaries, while USRDATA_PREFIX points to the obj root 238# holding the target environment (and also determines where cross-built 239# libraries, crt*.o, and include files are installed). 240# 241XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 242 OBJTREE=${OBJTREE} \ 243 DESTDIR=${CTOOLSDEST} \ 244 LC_ALL=C \ 245 _SHLIBDIRPREFIX=${CTOOLSDEST} \ 246 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 247 TOOLS_PREFIX=${CTOOLSDEST} \ 248 USRDATA_PREFIX=${WORLDDEST} \ 249 SELECT_LINKER=${WORLD_LDVER} \ 250 M4=${BTOOLSDEST}/usr/bin/m4 \ 251 PATH=${BTOOLSPATH}:${PATH} 252 253XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \ 254 -DBOOTSTRAPPING -DNOMAN -DNOSHARED -DSYSBUILD 255 256# world stage, note the strict path and note that TOOLS_PREFIX is left 257# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 258# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 259# for both binary and library paths, even though it is being compiled to 260# WORLDDEST. None of the programs in the world stage are ever actually 261# executed during the buildworld/installworld. 262# 263CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 264 OBJTREE=${OBJTREE} \ 265 MACHINE_ARCH=${TARGET_ARCH} \ 266 MACHINE=${TARGET} \ 267 MACHINE_PLATFORM=${TARGET_PLATFORM} \ 268 LC_ALL=C \ 269 OBJFORMAT_PATH=${CTOOLSDEST} \ 270 HOST_CCVER=${HOST_CCVER} \ 271 CCVER=${WORLD_CCVER} \ 272 LDVER=${WORLD_LDVER} \ 273 BINUTILSVER=${WORLD_BINUTILSVER} 274 275WMAKEENV= ${CROSSENV} \ 276 WORLDBUILD=1 \ 277 DESTDIR=${WORLDDEST} \ 278 _SHLIBDIRPREFIX=${WORLDDEST} \ 279 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 280 M4=${BTOOLSDEST}/usr/bin/m4 \ 281 PATH=${STRICTTMPPATH} 282 283WMAKE= ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD 284 285# install stage 286# 287IMAKEENV= ${CROSSENV} \ 288 PATH=${STRICTTMPPATH} 289IMAKE= ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD 290 291# kernel stage 292# 293KMAKEENV= ${WMAKEENV} 294 295# buildworld 296# 297# Attempt to rebuild the entire system, with reasonable chance of 298# success, regardless of how old your existing system is. 299# 300_worldtmp: _cleantmp _mtreetmp 301.ORDER: _cleantmp _mtreetmp 302 303_cleantmp: 304.if !defined(NOCLEAN) 305 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 306.else 307 # XXX - These two can depend on any header file. 308 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 309 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 310.endif 311 312_mtreetmp: 313 @echo 314 @echo "--------------------------------------------------------------" 315 @echo ">>> Rebuilding the temporary build tree" 316 @echo "--------------------------------------------------------------" 317 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 318.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 319 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 320 -p ${_dir}/ > /dev/null 321 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 322 -p ${_dir}/usr > /dev/null 323.endfor 324 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 325 -p ${WORLDDEST}/usr/include > /dev/null 326 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 327 328_bwinit: 329 @echo "--------------------------------------------------------------" 330 @echo ">>> starting buildworld target" 331 @echo "--------------------------------------------------------------" 332_bootstrap-tools: 333 @echo 334 @echo "--------------------------------------------------------------" 335 @echo ">>> stage 1: bootstrap tools" 336 @echo "--------------------------------------------------------------" 337 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 338_cleanobj: 339 @echo 340 @echo "--------------------------------------------------------------" 341 @echo ">>> stage 2a: cleaning up the object tree" 342 @echo "--------------------------------------------------------------" 343 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 344_obj: 345 @echo 346 @echo "--------------------------------------------------------------" 347 @echo ">>> stage 2b: rebuilding the object tree" 348 @echo "--------------------------------------------------------------" 349 cd ${.CURDIR}; ${WMAKE} par-obj 350_build-tools: 351 @echo 352 @echo "--------------------------------------------------------------" 353 @echo ">>> stage 2c: build tools" 354 @echo "--------------------------------------------------------------" 355 cd ${.CURDIR}; ${TMAKE} build-tools 356_cross-tools: 357 @echo 358 @echo "--------------------------------------------------------------" 359 @echo ">>> stage 3: cross tools" 360 @echo "--------------------------------------------------------------" 361 cd ${.CURDIR}; ${XMAKE} cross-tools 362_includes: 363 @echo 364 @echo "--------------------------------------------------------------" 365 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 366 @echo "--------------------------------------------------------------" 367 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 368_libraries: 369 @echo 370 @echo "--------------------------------------------------------------" 371 @echo ">>> stage 4b: building libraries" 372 @echo "--------------------------------------------------------------" 373 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries 374_depend: 375 @echo 376 @echo "--------------------------------------------------------------" 377 @echo ">>> stage 4c: make dependencies" 378 @echo "--------------------------------------------------------------" 379 cd ${.CURDIR}; ${WMAKE} par-depend 380everything: 381 @echo 382 @echo "--------------------------------------------------------------" 383 @echo ">>> stage 4d: building everything" 384 @echo "--------------------------------------------------------------" 385 cd ${.CURDIR}; ${WMAKE} all 386_initrd: 387 @echo 388 @echo "--------------------------------------------------------------" 389 @echo ">>> stage 5: building rescue and initrd" 390 @echo "--------------------------------------------------------------" 391.if !defined(NO_INITRD) 392 cd ${.CURDIR}/initrd; ${WMAKEENV} make all 393.endif 394_bwdone: 395 @echo "--------------------------------------------------------------" 396 @echo ">>> buildworld target complete" 397 @echo "--------------------------------------------------------------" 398_qwinit: 399 @echo "--------------------------------------------------------------" 400 @echo ">>> starting quickworld target" 401 @echo "--------------------------------------------------------------" 402_qwdone: 403 @echo "--------------------------------------------------------------" 404 @echo ">>> quickworld target complete" 405 @echo "--------------------------------------------------------------" 406_iwinit: 407 @echo "--------------------------------------------------------------" 408 @echo ">>> starting installworld target" 409 @echo "--------------------------------------------------------------" 410 411# note: buildworld no longer depends on _cleanobj because we rm -rf the 412# entire object tree and built the bootstrap tools in a different location. 413# 414# buildworld - build everything from scratch 415# quickworld - skip the bootstrap, build, and cross-build steps 416# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 417# 418# note: we include _obj in realquickworld to prevent accidental creation 419# of files in /usr/src. 420 421WMAKE_TGTS= 422.if !defined(SUBDIR_OVERRIDE) 423WMAKE_TGTS+= _worldtmp _bootstrap-tools 424.endif 425WMAKE_TGTS+= _obj _build-tools 426.if !defined(SUBDIR_OVERRIDE) 427WMAKE_TGTS+= _cross-tools 428.endif 429WMAKE_TGTS+= _includes _libraries _depend everything _initrd 430 431.if defined(WMAKE_TGTS_OVERRIDE) 432SUBDIR= 433WMAKE_TGTS= ${WMAKE_TGTS_OVERRIDE} 434.endif 435 436QMAKE_TGTS= _mtreetmp _obj _includes _libraries _depend everything _initrd 437 438buildworld: _bwinit ${WMAKE_TGTS} _bwdone 439 440quickworld: _qwinit ${QMAKE_TGTS} _qwdone 441 442realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone 443 444crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 445 446GENLOGDIR= /usr/obj${.CURDIR} 447.ORDER: build-all install-all 448 449# build-all 450# 451# build 452build-all: 453 @echo "Building world, log file in ${GENLOGDIR}/bw.out" 454 @mkdir -p ${GENLOGDIR} 455 @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildworld > ${GENLOGDIR}/bw.out 2>&1) 456 @sync 457 @echo "Building kernel, log file in ${GENLOGDIR}/bk.out" 458 @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildkernel > ${GENLOGDIR}/bk.out 2>&1) 459 @echo "build-all completed ok" 460 @sync 461 462install-all: 463 @echo "Installing kernel, log file in ${GENLOGDIR}/bk.out" 464 @mkdir -p ${GENLOGDIR} 465 @(cd ${.CURDIR}; ${MAKE} -j 1 installkernel >> ${GENLOGDIR}/bk.out 2>&1) 466 @sync 467 @echo "Installing world, log file in ${GENLOGDIR}/bw.out" 468 @(cd ${.CURDIR}; ${MAKE} -j 1 installworld >> ${GENLOGDIR}/bw.out 2>&1) 469 @sync 470 @echo "Upgrading world" 471 @(cd ${.CURDIR}; ${MAKE} -j 1 upgrade >> ${GENLOGDIR}/bw.out 2>&1) 472 @sync 473 @echo "install-all completed ok. reboot recommended and after that, " 474 @echo "when doing a major upgrade, 'pkg upgrade -f' after rebooting" 475 476.ORDER: _bwinit ${WMAKE_TGTS} _bwdone 477.ORDER: _obj _includes 478.ORDER: _qwinit _mtreetmp _obj 479.ORDER: installcheck backupworld-auto 480.ORDER: everything _qwdone 481 482 483# installcheck 484# 485# Checks to be sure system is ready for installworld 486# 487installcheck: _iwinit 488.if !defined(OVERRIDE_CHECKS) 489.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 490 @case `uname -r` in \ 491 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) \ 492 echo "You must upgrade your kernel to at least 1.5.4" \ 493 "and reboot before you can safely installworld," \ 494 "due to libc/system call ABI changes."; \ 495 /usr/bin/false; \ 496 esac 497 @case `uname -r` in \ 498 1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) \ 499 echo "The system is too old for a normal installworld," \ 500 "you need to use 'installworld-force'."; \ 501 /usr/bin/false; \ 502 esac 503.endif 504.endif 505 506# installworld 507# 508# Backs up the current world if ${AUTO_BACKUP} is writable. 509# Installs everything compiled by a 'buildworld'. 510# 511installworld: installcheck 512.if !defined(NO_BACKUP) 513 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1 514 @cd ${.CURDIR}; \ 515 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \ 516 ${IMAKE} backupworld-auto) || \ 517 echo "Cannot write to ${AUTO_BACKUP} - world not backed up" 518.endif 519 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 520 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc \ 521 ${DESTDIR}/etc/upgrade/ 522 cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL os-release 523.if !defined(NO_INITRD) 524 cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL initrd 525.endif 526 sync 527 @echo "--------------------------------------------------------------" 528 @echo ">>> installworld target complete" 529 @echo "--------------------------------------------------------------" 530 531os-release: 532 @echo "NAME=DragonFly" > ${DESTDIR}/etc/os-release 533 @echo "VERSION=${OSREL}-SYNTH" >> ${DESTDIR}/etc/os-release 534 @echo "VERSION_ID=${OSREL}" >> ${DESTDIR}/etc/os-release 535 @echo "ID=dragonfly" >> ${DESTDIR}/etc/os-release 536 @echo "ANSI_COLOR=\"0;32\"" >> ${DESTDIR}/etc/os-release 537 @echo "PRETTY_NAME=\"DragonFlyBSD ${OSREL}-SYNTH\"" >> ${DESTDIR}/etc/os-release 538 @echo "CPE_NAME=\"cpe:/o:dragonflybsd:dragonfly:${OSREL}\"" >> ${DESTDIR}/etc/os-release 539 @echo "SUPPORT_URL=\"http://chat.efnet.org:9090/?nick=dflynick&channels=%23dragonflybsd&Login=Login\"" >> ${DESTDIR}/etc/os-release 540 @echo "HOME_URL=\"https://www.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release 541 @echo "BUG_REPORT_URL=\"https://bugs.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release 542 @echo "MACHINE_ARCH=${MACHINE_ARCH}" >> ${DESTDIR}/etc/os-release 543 @echo "MACHINE=${MACHINE}" >> ${DESTDIR}/etc/os-release 544 @echo "DFLYVERSION=${DFLYVERSION}" >> ${DESTDIR}/etc/os-release 545 546installworld-force: 547 @echo "Doing a forced installworld. This will install to a temporary directory," 548 @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/" 549 @echo "and finally will issue a normal installworld." 550 @echo 551 @echo "Starting in 5 seconds. ^C to abort." 552 @echo 553 sleep 1 554 rm -rf /usr/obj/temp > /dev/null 2>&1 || chflags -R noschg /usr/obj/temp 555 rm -rf /usr/obj/temp 556 mkdir -p /usr/obj/temp/cpdup/bin 557 (cd ${.CURDIR}/bin/cpdup; \ 558 make clean && \ 559 make obj && \ 560 make clean && \ 561 make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE) 562 @echo "XXXXXXXXX Installing to temporary XXXXXXXXX" 563 @sleep 1 564 (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1) 565 @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX" 566 @sleep 1 567 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin 568 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin 569 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib 570 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin 571 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin 572 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib 573 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec 574 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec 575 @echo "XXXXXXXXX Doing final installworld XXXXXXXX" 576 sleep 5 577 (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE) 578 (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE) 579.if !defined(NO_INITRD) 580 (cd ${.CURDIR}; ${MAKE} initrd) 581.endif 582 583# reinstall 584# 585# If you have a build server, you can NFS mount the source and obj directories 586# and do a 'make reinstall' on the *client* to install new binaries from the 587# most recent server build. 588# 589reinstall: 590 @echo "--------------------------------------------------------------" 591 @echo ">>> Making hierarchy" 592 @echo "--------------------------------------------------------------" 593 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy 594 @echo 595 @echo "--------------------------------------------------------------" 596 @echo ">>> Installing everything" 597 @echo "--------------------------------------------------------------" 598 cd ${.CURDIR}; make -f Makefile.inc1 install 599 600# initrd 601# 602# Install the rescue tools and the initrd image built by 'buildworld'. 603# 604initrd: .PHONY 605 (cd ${.CURDIR}/initrd; ${IMAKEENV} make install) 606 607 608# buildkernel, nativekernel, quickkernel, realquickkernel, and installkernel 609# 610# Which kernels to build and/or install is specified by setting 611# KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed. 612# Only the existing (depending TARGET) config files are used 613# for building kernels and only the first of these is designated 614# as the one being installed. 615# 616# You can specify INSTALLSTRIPPED=1 if you wish the installed 617# kernel and modules to be stripped of its debug info (required 618# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 619# if you only want to strip the modules of their debug info. These 620# only apply if you have DEBUG=-g in your kernel config or make line. 621# 622# Note that we have to use TARGET instead of TARGET_ARCH when 623# we're in kernel-land. Since only TARGET_ARCH is (expected) to 624# be set to cross-build, we have to make sure TARGET is set 625# properly. 626 627.if !defined(KERNCONF) && defined(KERNEL) 628KERNCONF= ${KERNEL} 629KERNWARN= yes 630.else 631# XXX makeshift fix to build the right kernel for the (target) architecture 632# We should configure this in the platform files somehow 633.if ${TARGET_ARCH} == "x86_64" 634KERNCONF?= X86_64_GENERIC 635.endif 636.endif 637INSTKERNNAME?= kernel 638 639KRNLSRCDIR= ${.CURDIR}/sys 640KRNLCONFDIR= ${KRNLSRCDIR}/config 641KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 642KERNCONFDIR?= ${KRNLCONFDIR} 643 644BUILDKERNELS= 645INSTALLKERNEL= 646.for _kernel in ${KERNCONF} 647.if exists(${KERNCONFDIR}/${_kernel}) 648BUILDKERNELS+= ${_kernel} 649.if empty(INSTALLKERNEL) 650INSTALLKERNEL= ${_kernel} 651.endif 652.endif 653.endfor 654 655# kernel version numbers survive rm -rf 656# 657.for _kernel in ${BUILDKERNELS} 658.if exists(${KRNLOBJDIR}/${_kernel}/version) 659KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 660.endif 661.endfor 662 663# buildkernel 664# 665# Builds all kernels defined by BUILDKERNELS. 666# 667bk_tools: 668 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 669 echo "You must buildworld before buildkernel. If you wish"; \ 670 echo "to build a kernel using native tools, config it manually"; \ 671 echo "or use the nativekernel target if you are in a rush"; \ 672 /usr/bin/false; \ 673 fi 674 675maybe_bk_tools: 676.for _kernel in ${BUILDKERNELS} 677 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 678 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 679 echo "The kernel was built using buildworld tools which no" ; \ 680 echo "longer appear to exist, (real)quickkernel failed!" ; \ 681 /usr/bin/false; \ 682 fi; \ 683 fi 684.endfor 685 686bk_build_list: 687.if empty(BUILDKERNELS) 688 @echo ">>> ERROR: Missing kernel configuration file(s)." 689 @echo ">>> ${KERNCONF} not found in ${KERNCONFDIR}." 690 @false 691.endif 692 693bk_kernwarn: 694.if defined(KERNWARN) 695 @echo "--------------------------------------------------------------" 696 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 697 @echo "--------------------------------------------------------------" 698 @sleep 3 699.endif 700 @echo 701 702# The buildkernel target rebuilds the specified kernels from scratch 703# using the crossbuild tools generated by the last buildworld. It is 704# the safest (but also the most time consuming) way to build a new kernel. 705# 706buildkernel: bk_tools bk_build_list bk_kernwarn 707.for _kernel in ${BUILDKERNELS} 708 @echo "--------------------------------------------------------------" 709 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 710 @echo "--------------------------------------------------------------" 711 @echo "===> ${_kernel}" 712.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 713 rm -rf ${KRNLOBJDIR}/${_kernel} 714.else 715 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 716 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 717 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 718.endif 719 mkdir -p ${KRNLOBJDIR} 720.if !defined(NO_KERNELCONFIG) 721 cd ${KRNLCONFDIR}; \ 722 PATH=${STRICTTMPPATH} \ 723 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 724 ${KERNCONFDIR}/${_kernel} 725.endif 726.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 727 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 728.endif 729 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 730.if !defined(NO_KERNELDEPEND) 731 cd ${KRNLOBJDIR}/${_kernel}; \ 732 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend 733.endif 734 cd ${KRNLOBJDIR}/${_kernel}; \ 735 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all 736 @echo "--------------------------------------------------------------" 737 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 738 @echo "--------------------------------------------------------------" 739.endfor 740 741# The nativekernel target rebuilds the specified kernels from scratch 742# using the system's standard compiler rather than using the crossbuild 743# tools generated by the last buildworld. This is fairly safe if your 744# system is reasonable up-to-date. 745# 746nativekernel: bk_build_list bk_kernwarn 747.for _kernel in ${BUILDKERNELS} 748 @echo "--------------------------------------------------------------" 749 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 750 @echo "--------------------------------------------------------------" 751 @echo "===> ${_kernel}" 752.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 753 rm -rf ${KRNLOBJDIR}/${_kernel} 754.else 755 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 756 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 757 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 758.endif 759 mkdir -p ${KRNLOBJDIR} 760.if !defined(NO_KERNELCONFIG) 761 cd ${KRNLCONFDIR}; \ 762 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 763 ${KERNCONFDIR}/${_kernel} 764.endif 765.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 766 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 767.endif 768 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 769.if !defined(NO_KERNELDEPEND) 770 cd ${KRNLOBJDIR}/${_kernel}; \ 771 make KERNEL=${INSTKERNNAME} depend 772.endif 773 cd ${KRNLOBJDIR}/${_kernel}; \ 774 make KERNEL=${INSTKERNNAME} all 775 @echo "--------------------------------------------------------------" 776 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 777 @echo "--------------------------------------------------------------" 778.endfor 779 780# The (real)quickkernel target rebuilds the specified kernels as quickly 781# as possible. It will use the native tools or the buildworld cross tools 782# based on whether the kernel was originally generated via buildkernel or 783# nativekernel. Config is rerun but the object hierarchy is not rebuilt. 784# realquickkernel skips the depend step (analogous to realquickworld). 785# 786quickkernel realquickkernel: maybe_bk_tools bk_build_list bk_kernwarn 787.for _kernel in ${BUILDKERNELS} 788 @echo "--------------------------------------------------------------" 789 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 790 @echo "--------------------------------------------------------------" 791 @echo "===> ${_kernel}" 792.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 793.if !defined(NO_KERNELCONFIG) 794 cd ${KRNLCONFDIR}; \ 795 PATH=${STRICTTMPPATH} \ 796 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 797 ${KERNCONFDIR}/${_kernel} 798.endif 799.if !defined(NO_KERNELDEPEND) && !make(realquickkernel) 800 cd ${KRNLOBJDIR}/${_kernel}; \ 801 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend 802.endif 803 cd ${KRNLOBJDIR}/${_kernel}; \ 804 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all 805.else 806.if !defined(NO_KERNELCONFIG) 807 cd ${KRNLCONFDIR}; \ 808 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 809 ${KERNCONFDIR}/${_kernel} 810.endif 811.if !defined(NO_KERNELDEPEND) && !make(realquickkernel) 812 cd ${KRNLOBJDIR}/${_kernel}; \ 813 make KERNEL=${INSTKERNNAME} depend 814.endif 815 cd ${KRNLOBJDIR}/${_kernel}; \ 816 make KERNEL=${INSTKERNNAME} all 817.endif 818 @echo "--------------------------------------------------------------" 819 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 820 @echo "--------------------------------------------------------------" 821.endfor 822 823 824# installkernel 825# 826# Install the kernel defined by INSTALLKERNEL 827# 828installkernel reinstallkernel: 829 @echo "--------------------------------------------------------------" 830 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`" 831 @echo "--------------------------------------------------------------" 832.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run) 833 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 834 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 835.else 836 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 837 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 838.endif 839 @echo "--------------------------------------------------------------" 840 @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`" 841 @echo "--------------------------------------------------------------" 842 843 844# ------------------------------------------------------------------------ 845# 846# From here onwards are utility targets used by the 'make world' and 847# related targets. If your 'world' breaks, you may like to try to fix 848# the problem and manually run the following targets to attempt to 849# complete the build. Beware, this is *not* guaranteed to work, you 850# need to have a pretty good grip on the current state of the system 851# to attempt to manually finish it. If in doubt, 'make world' again. 852# 853 854# bootstrap-tools: Build all tools required to build all tools. Note that 855# order is important in a number of cases and also note that the bootstrap 856# and build tools stages have access to earlier binaries they themselves 857# had generated. 858# 859# [x]install: dependencies on various new install features 860# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 861# envs are not compatible with older objformat binaries. 862# 863 864# BSTRAPDIRS1 - must be built in strict order, no parallelism 865# 866# order is very important. yacc before m4 before flex. flex exec's m4, 867# m4's parser file needs the latest byacc (insanity!). 868# 869BSTRAPDIRS1= \ 870 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \ 871 bin/test bin/cat bin/ln bin/mv bin/expr bin/sh \ 872 bin/hostname bin/kill \ 873 usr.bin/yacc usr.bin/m4 usr.bin/localedef \ 874 usr.bin/uudecode usr.bin/xinstall \ 875 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \ 876 usr.bin/find usr.bin/flex 877 878# BSTRAPDIRS2 - may built in parallel 879# 880BSTRAPDIRS2= \ 881 usr.bin/sed usr.bin/uname usr.bin/touch \ 882 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 883 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 884 usr.bin/gencat usr.bin/chflags \ 885 usr.bin/uuencode usr.bin/cap_mkdb usr.bin/true usr.bin/false \ 886 usr.bin/cmp usr.bin/xargs usr.bin/env usr.bin/dirname \ 887 usr.bin/tail usr.bin/unifdef \ 888 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 889 usr.sbin/tzsetup usr.sbin/zic usr.sbin/pwd_mkdb \ 890 gnu/usr.bin/grep usr.bin/sort usr.bin/gzip \ 891 usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch 892 893bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2 894 touch ${BTOOLSDEST}/.bootstrap_done 895 896bootstrap-tools-before: 897 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 898 899bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/} 900 901bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/} 902 903.ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2 904 905.ORDER: ${BSTRAPDIRS1:S/^/bstrap-/} 906 907.for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2} 908bstrap-${_tool}! 909 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 910 cd ${.CURDIR}/${_tool}; \ 911 make DIRPRFX=${_tool}/ obj && \ 912 make DIRPRFX=${_tool}/ depend && \ 913 make DIRPRFX=${_tool}/ all && \ 914 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 915.endfor 916 917# build-tools: Build special purpose build tools. 918# 919# XXX we may be able to remove or consolidate this into bootstrap-tools 920# now that we have the native helper (.nx/.no) infrastructure. 921# 922# XXX we should separate this into new Makefile.inc2. 923# Just to prepare for reduction of ORDER: that slows down parallel crossworld. 924 925# Make sure Makefile.inc1 logic is intact. 926.if !defined(WORLD_ALTCOMPILER) 927.warning undefined WORLD_ALTCOMPILER 928.endif 929 930# gcc80 is now the default compiler. See sys.mk for WORLD_ALTCOMPILER default 931# and this file for WORLD_CCVER. 932# 933_gcc47_cross= gnu/usr.bin/cc47 934_gcc80_cross= gnu/usr.bin/cc80 935_gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc 936 937.if !defined(NO_ALTCOMPILER) 938. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 939_altcompiler_cross+= ${_gcc47_cross} 940. endif 941.endif 942 943_basecompiler_cross= ${_gcc80_cross} 944 945_custom_cross= libexec/customcc 946_binutils= gnu/usr.bin/${WORLD_BINUTILSVER} 947 948build-tools: build-tools-targets 949 touch ${BTOOLSDEST}/.build_done 950 951build-tools-targets: ${BTOOLSDIRS:S/^/btools-/} 952 953# 954# cross-tools: Build cross-building tools 955# 956 957CTOOLSDIRS= usr.bin/objformat 958 959CTOOLSDIRS+= ${_binutils} \ 960 ${_gcc_common_cross} \ 961 ${_altcompiler_cross} \ 962 ${_basecompiler_cross} ${_custom_cross} 963 964cross-tools: cross-tools-targets 965 touch ${CTOOLSDEST}/.cross_done 966 967cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/} 968 969.for _tool in ${CTOOLSDIRS} 970ctools-${_tool}! 971 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 972 cd ${.CURDIR}/${_tool}; \ 973 make DIRPRFX=${_tool}/ obj && \ 974 make DIRPRFX=${_tool}/ depend && \ 975 make DIRPRFX=${_tool}/ all && \ 976 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 977.endfor 978 979# 980# hierarchy - ensure that all the needed directories are present 981# 982hierarchy: 983 cd ${.CURDIR}/etc; make distrib-dirs 984 985# 986# libraries - build all libraries, and install them under ${DESTDIR}. 987# 988# The list of libraries with dependents (${_prebuild_libs}) and their 989# interdependencies (__L) are built automatically by the 990# ${.CURDIR}/tools/make_libdeps.sh script. 991# 992# .makeenv does not work when bootstrapping from 4.x, so we must be sure 993# to specify the correct CCVER or 'cc' will not exec the correct compiler. 994# 995libraries: 996 cd ${.CURDIR}; \ 997 HOST_CCVER=${HOST_CCVER} CCVER=gcc80 \ 998 make -f Makefile.inc1 _startup_libs80 -DSYSBUILD -DLIBGCC_ONLY; 999.if !defined(NO_ALTCOMPILER) 1000. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 1001 cd ${.CURDIR}; \ 1002 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \ 1003 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD -DLIBGCC_ONLY; 1004. endif 1005.endif 1006 cd ${.CURDIR}; \ 1007 make -f Makefile.inc1 _startup_libs -DSYSBUILD && \ 1008 make -f Makefile.inc1 _prebuild_libs -DSYSBUILD && \ 1009 make -f Makefile.inc1 _generic_libs -DSYSBUILD && \ 1010 touch ${WORLDDEST}/.libraries_done 1011 1012# These dependencies are not automatically generated: 1013# 1014# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all 1015# shared libraries for ELF. The target for _startup_libsXX is 1016# specifically built using gccXX. 1017# 1018_startup_libs47= gnu/usr.bin/cc47/cc_prep \ 1019 gnu/usr.bin/cc47/cc_tools \ 1020 gnu/lib/gcc47/csu \ 1021 gnu/lib/gcc47/libgcc \ 1022 gnu/lib/gcc47/libgcc_eh \ 1023 gnu/lib/gcc47/libgcc_pic 1024 1025_startup_libs80= gnu/usr.bin/cc80/cc_prep \ 1026 gnu/usr.bin/cc80/cc_tools \ 1027 gnu/lib/gcc80/csu \ 1028 gnu/lib/gcc80/libgcc \ 1029 gnu/lib/gcc80/libgcc_eh \ 1030 gnu/lib/gcc80/libgcc_pic 1031 1032.if !defined(NO_ALTCOMPILER) 1033. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 1034_startup_libs_alt+= _startup_libs47 1035. endif 1036.endif 1037 1038_startup_libs_base= _startup_libs80 1039 1040_startup_libs= lib/csu lib/libc lib/libc_rtld 1041lib/libc__L: lib/csu__L 1042 1043_prebuild_libs= lib/libbz2 lib/liblzma lib/libz lib/libzstd 1044_prebuild_libs+= lib/libutil 1045 1046_prebuild_libs+= lib/libpcap 1047 1048_generic_libs= gnu/lib 1049 1050_prebuild_libs+= lib/libcrypt lib/libncurses/libncurses 1051 1052_generic_libs+= lib 1053 1054_prebuild_libs+= lib/librecrypto lib/libressl 1055lib/libressl__L: lib/librecrypto__L 1056 1057_prebuild_libs+= lib/libldns 1058lib/libldns__L: lib/librecrypto__L 1059 1060_prebuild_libs+= lib/libsbuf lib/libm \ 1061 lib/libpam/libpam lib/libypclnt lib/lib${THREAD_LIB} \ 1062 lib/libpthread lib/libprop 1063 1064_generic_libs+= usr.bin/flex/lib 1065 1066.for _alib in ${_startup_libs_alt} ${_startup_libs_base} 1067__startup_alibs+= ${${_alib}} 1068.endfor 1069 1070.for _lib in ${__startup_alibs} \ 1071 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 1072${_lib}__L: .PHONY 1073.if exists(${.CURDIR}/${_lib}) 1074 @${ECHODIR} "===> ${_lib}"; \ 1075 cd ${.CURDIR}/${_lib}; \ 1076 echo "STEP DEP ${_lib}" && \ 1077 make DIRPRFX=${_lib}/ depend && \ 1078 echo "STEP ALL ${_lib}" && \ 1079 make DIRPRFX=${_lib}/ all && \ 1080 echo "STEP INSTALL ${_lib}" && \ 1081 make DIRPRFX=${_lib}/ install && \ 1082 echo "STEP DONE ${_lib}"; 1083.else 1084.warning missing ${.CURDIR}/${_lib} directory. 1085.endif 1086.endfor 1087 1088_startup_libs: ${_startup_libs:S/$/__L/} 1089.for _alib in ${_startup_libs_alt} ${_startup_libs_base} 1090${_alib}: ${${_alib}:C/$/__L/} 1091.endfor 1092_prebuild_libs: ${_prebuild_libs:S/$/__L/} 1093_generic_libs: ${_generic_libs:S/$/__L/} 1094 1095# library targets must be ordered because there are inter-library 1096# races (e.g. generation of tconfig.h) 1097# 1098.for _alib in ${_startup_libs_base} ${_startup_libs_alt} 1099.ORDER: ${${_alib}:C/$/__L/} 1100.endfor 1101 1102# uncomment if there are missing dependencies 1103.if 0 1104.ORDER: ${_prebuild_libs:S/$/__L/} 1105# we can disable this one, no lib/* depend on libstdc++ 1106.ORDER: ${_generic_libs:S/$/__L/} 1107.endif 1108 1109.for __target in clean cleandepend cleandir obj depend includes 1110.for entry in ${SUBDIR} 1111${entry}.${__target}__D: .PHONY 1112 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 1113 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 1114 edir=${entry}.${MACHINE_ARCH}; \ 1115 cd ${.CURDIR}/$${edir}; \ 1116 else \ 1117 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 1118 edir=${entry}; \ 1119 cd ${.CURDIR}/$${edir}; \ 1120 fi; \ 1121 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 1122.endfor 1123par-${__target}: ${SUBDIR:C/$/.${__target}__D/} 1124.ORDER: ${SUBDIR:C/$/.${__target}__D/} 1125.endfor 1126.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 1127 1128# The wmake target is used by /usr/bin/wmake to run make in a 1129# world build environment. 1130# 1131wmake: 1132 @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD' 1133 1134wmakeenv: 1135 @echo '${WMAKEENV} /bin/sh' 1136 1137bmake: 1138 @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD' 1139 1140bmakeenv: 1141 @echo '${BMAKEENV} /bin/sh' 1142 1143tmake: 1144 @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD' 1145 1146tmakeenv: 1147 @echo '${TMAKEENV} /bin/sh' 1148 1149xmake: 1150 @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD' 1151 1152xmakeenv: 1153 @echo '${XMAKEENV} /bin/sh' 1154 1155.if !defined(NO_BACKUP) 1156backupworld: backup-clean 1157 @mkdir -p ${WORLD_BACKUP} 1158.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \ 1159 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \ 1160 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec)) 1161 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \ 1162 --options gzip:compression-level=1 \ 1163 sbin bin usr/sbin usr/bin usr/lib usr/libexec 1164.endif 1165 1166backupworld-auto: 1167 rm -f ${AUTO_BACKUP}/binaries.tar.gz 1168 @mkdir -p ${AUTO_BACKUP} 1169.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \ 1170 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \ 1171 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec)) 1172 /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \ 1173 --options gzip:compression-level=1 \ 1174 sbin bin usr/sbin usr/bin usr/lib usr/libexec 1175.endif 1176 1177backup-auto-clean: 1178 rm -f ${AUTO_BACKUP}/binaries.tar.gz 1179 1180backup-clean: 1181 rm -f ${WORLD_BACKUP}/binaries.tar.gz 1182 1183restoreworld: 1184.if !exists(${WORLD_BACKUP}/binaries.tar.gz) 1185 @echo "There does not seem to be a valid archive present." 1186.else 1187 @echo "Restoring system binaries from manual backup archive..." 1188 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \ 1189 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \ 1190 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec 1191 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ 1192.endif 1193 1194restoreworld-auto: 1195.if !exists(${AUTO_BACKUP}/binaries.tar.gz) 1196 @echo "There does not seem to be a valid archive present." 1197.else 1198 @echo "Restoring system binaries from auto-backup archive..." 1199 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \ 1200 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \ 1201 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec 1202 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ 1203.endif 1204.endif 1205 1206# Take advantage of bmake error response 1207# 1208MAKE_PRINT_VAR_ON_ERROR= \ 1209 .CURDIR \ 1210 .OBJDIR \ 1211 .TARGETS \ 1212 .ERROR_TARGET \ 1213 .MAKE.LEVEL \ 1214 .MAKE.MODE \ 1215 PATH \ 1216 LD_LIBRARY_PATH \ 1217 MACHINE_ARCH \ 1218 MACHINE \ 1219 MAKEFILE \ 1220 MAKESYSPATH \ 1221 MAKEOBJDIRPREFIX \ 1222 WORLD_ALTCOMPILER \ 1223 DESTDIR \ 1224 SHELL .SHELL 1225.if ${.MAKE.LEVEL} > 0 1226MAKE_PRINT_VAR_ON_ERROR+= .MAKE.MAKEFILES .PATH 1227.endif 1228 1229.include <bsd.subdir.mk> 1230