1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# 4# Build-time options are documented in make.conf(5). 5# 6# The intended user-driven targets are: 7# 8# buildworld - rebuild *everything*, including glue to help do upgrades 9# quickworld - skip the glue and do a depend+build on the meat 10# realquickworld - skip the glue and depend stages and just build the meat 11# crossworld - only build the glue (particularly the cross-build environment) 12# installworld- install everything built by "buildworld" 13# backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec 14# to manual backup dir 15# rescue - create rescue image 16# restoreworld- installs binaries from manual backup dir to world 17# restoreworld-auto - installs binaries from auto-backup dir to world 18# most - build user commands, no libraries or include files 19# installmost - install user commands, no libraries or include files 20# backup-clean - delete backup from manual backup dir 21# backup-auto-clean - delete backup from auto-backup dir 22# 23# Standard targets (not defined here) are documented in the makefiles in 24# /usr/share/mk. These include: 25# obj depend all install clean cleandepend cleanobj 26 27# Put initial settings here. 28SUBDIR= 29 30# /libexec/ld-elf.so.2 needs to be installed first 31# Otherwise, install(1) beeing a dynamically linked binary will fail 32# during the first upgrade from a static to a dynamic world 33.if exists(${.CURDIR}/libexec) 34SUBDIR+= libexec 35.endif 36 37# We must do include and lib early so that the perl *.ph generation 38# works correctly as it uses the header files installed by this. 39.if exists(${.CURDIR}/include) 40SUBDIR+= include 41.endif 42.if exists(${.CURDIR}/lib) 43SUBDIR+= lib 44.endif 45# This exists simply to ensure that the obj dir hierarchy is 46# intact for nrelease, allowing the nrelease Makefile's to 47# reference ${.OBJDIR}. 48# 49.if exists(${.CURDIR}/nrelease) 50SUBDIR+= nrelease 51.endif 52 53.if exists(${.CURDIR}/bin) 54SUBDIR+= bin 55.endif 56.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 57SUBDIR+= games 58.endif 59.if exists(${.CURDIR}/gnu) 60SUBDIR+= gnu 61.endif 62.if exists(${.CURDIR}/sbin) 63SUBDIR+= sbin 64.endif 65.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 66SUBDIR+= share 67.endif 68.if exists(${.CURDIR}/sys) 69SUBDIR+= sys 70.endif 71.if exists(${.CURDIR}/usr.bin) 72SUBDIR+= usr.bin 73.endif 74.if exists(${.CURDIR}/usr.sbin) 75SUBDIR+= usr.sbin 76.endif 77#.if exists(${.CURDIR}/llvm_clang) 78#SUBDIR+= llvm_clang 79#.endif 80 81.if exists(${.CURDIR}/etc) 82SUBDIR+= etc 83.endif 84 85# These are last, since it is nice to at least get the base system 86# rebuilt before you do them. 87.if defined(LOCAL_DIRS) 88.for _DIR in ${LOCAL_DIRS} 89.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 90SUBDIR+= ${_DIR} 91.endif 92.endfor 93.endif 94 95.if defined(SUBDIR_OVERRIDE) 96SUBDIR= ${SUBDIR_OVERRIDE} 97.endif 98 99.if defined(NOCLEANDIR) 100CLEANDIR= clean cleandepend 101.else 102CLEANDIR= cleandir 103.endif 104 105.if defined(NO_CLEAN) 106NOCLEAN= # defined 107.endif 108 109# Object directory base in primary make. Note that when we rerun make 110# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 111# subdirectory because the rest of the build system needs it that way. 112# The original object directory base is saved in OBJTREE. 113# 114MAKEOBJDIRPREFIX?= /usr/obj 115OBJTREE?= ${MAKEOBJDIRPREFIX} 116 117# Used for stage installs and pathing 118# 119DESTDIRBASE:= ${OBJTREE}${.CURDIR} 120 121# Remove DESTDIR from MAKEFLAGS. It is present in the environment 122# anyhow, and we need to be able to override it for stage installs 123.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*} 124 125# This section sets the tools used to build the world/kernel 126WORLD_CCVER?= gcc50 127WORLD_LDVER?= ld.gold 128WORLD_BINUTILSVER?= binutils227 129 130# Set the backup parameters if they are not already defined 131# 132WORLD_BACKUP?= /var/backups/world_backup 133AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR} 134 135TARGET_ARCH?= ${MACHINE_ARCH} 136.if ${TARGET_ARCH} == ${MACHINE_ARCH} 137TARGET?= ${MACHINE} 138.else 139TARGET?= ${TARGET_ARCH} 140.endif 141.if make(buildworld) 142BUILD_ARCH!= sysctl -n hw.machine_arch 143 144# temporary until everybody has converted to x86_64 145.if ${BUILD_ARCH} == "amd64" 146BUILD_ARCH= x86_64 147.endif 148 149.if ${MACHINE_ARCH} != ${BUILD_ARCH} 150.error To cross-build, set TARGET_ARCH. 151.endif 152.endif 153 154# XXX this is ugly and we need to come up with a nicer solution 155.if !defined(TARGET_PLATFORM) 156.if ${TARGET_ARCH} == "x86_64" 157TARGET_PLATFORM= pc64 158.else 159.error Unknown target architecture. 160.endif 161.endif 162 163THREAD_LIB?= thread_xu 164.if ${THREAD_LIB} == "c_r" 165.if defined(NO_LIBC_R) 166.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined 167.endif 168.endif 169 170# BTOOLS (Natively built) All non-cross-development tools that the 171# main build needs. This includes things like 'mkdir' and 'rm'. 172# We will not use the native system's exec path once we start 173# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 174# 175# CTOOLS (Natively built) Cross development tools which are specific 176# to the target architecture. 177# 178# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 179# CTOOLS. 180# 181# MACHINE_PLATFORM Platform Architecture we are building on 182# MACHINE Machine Architecture (usually the same as MACHINE_ARCH) 183# MACHINE_ARCH Cpu Architecture we are building on 184# 185# TARGET_PLATFORM Platform Architecture we are building for 186# TARGET Machine Architecture we are building for 187# TARGET_ARCH Cpu Architecture we are building for 188# 189BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 190CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 191WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 192 193# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 194# cross-tools stages to augment the existing command path to access newer 195# versions of certain utilities such as 'patch' that the cross-tools stage 196# might expect. 197# 198BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 199 200# The strict temporary command path contains all binaries required 201# by the buildworld system after the cross-tools stage. 202# 203STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin 204 205TMPDIR?= /tmp 206TMPPID!= echo $$$$ 207 208# 209# Building a world goes through the following stages 210# 211# 1. bootstrap-tool stage [BMAKE] 212# This stage is responsible for creating programs that 213# are needed for backward compatibility reasons. They 214# are not built as cross-tools. 215# 2. build-tool stage [TMAKE] 216# This stage is responsible for creating the object 217# tree and building any tools that are needed during 218# the build process. 219# 3. cross-tool stage [XMAKE] 220# This stage is responsible for creating any tools that 221# are needed for cross-builds. A cross-compiler is one 222# of them. 223# 4. world stage [WMAKE] 224# This stage actually builds the world. 225# 5. install stage (optional) [IMAKE] 226# This stage installs a previously built world. 227# 228# In all cases we must carefully adjust the environment so the proper 229# tools and header files are used. 230# 231# NOTE: The M4 environment variable is used by the [f]lex binary to 232# override the location of the 'm4' binary. The override is 233# needed for certain buildworld version transitions, specifically 234# past a certain point in 3.3 because the older /usr/bin/m4 will 235# generate output that will blow up the newer [f]lex/yacc/bison 236# utilities. 237# 238 239# bootstrap-tool stage 240# 241BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 242 OBJTREE=${OBJTREE} \ 243 DESTDIR=${BTOOLSDEST} \ 244 LC_ALL=C \ 245 PATH=${BTOOLSPATH}:${PATH} \ 246 M4=${BTOOLSDEST}/usr/bin/m4 \ 247 INSTALL="sh ${.CURDIR}/tools/install.sh" 248 249BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \ 250 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 251 -DNO_WERROR -DNO_NLS -DSYSBUILD 252 253# build-tool stage 254# 255TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 256 OBJTREE=${OBJTREE} \ 257 DESTDIR= \ 258 LC_ALL=C \ 259 PATH=${BTOOLSPATH}:${PATH} \ 260 M4=${BTOOLSDEST}/usr/bin/m4 \ 261 INSTALL="sh ${.CURDIR}/tools/install.sh" 262 263TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \ 264 -DNOSHARED -DSYSBUILD 265 266# cross-tool stage 267# 268# note: TOOLS_PREFIX points to the obj root holding the cross 269# compiler binaries, while USRDATA_PREFIX points to the obj root 270# holding the target environment (and also determines where cross-built 271# libraries, crt*.o, and include files are installed). 272# 273XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 274 OBJTREE=${OBJTREE} \ 275 DESTDIR=${CTOOLSDEST} \ 276 LC_ALL=C \ 277 _SHLIBDIRPREFIX=${CTOOLSDEST} \ 278 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 279 TOOLS_PREFIX=${CTOOLSDEST} \ 280 USRDATA_PREFIX=${WORLDDEST} \ 281 SELECT_LINKER=${WORLD_LDVER} \ 282 M4=${BTOOLSDEST}/usr/bin/m4 \ 283 PATH=${BTOOLSPATH}:${PATH} 284 285XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \ 286 -DBOOTSTRAPPING -DNOSHARED -DSYSBUILD 287 288# world stage, note the strict path and note that TOOLS_PREFIX is left 289# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 290# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 291# for both binary and library paths, even though it is being compiled to 292# WORLDDEST. None of the programs in the world stage are ever actually 293# executed during the buildworld/installworld. 294# 295CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 296 OBJTREE=${OBJTREE} \ 297 MACHINE_ARCH=${TARGET_ARCH} \ 298 MACHINE=${TARGET} \ 299 MACHINE_PLATFORM=${TARGET_PLATFORM} \ 300 LC_ALL=C \ 301 OBJFORMAT_PATH=${CTOOLSDEST} \ 302 HOST_CCVER=${HOST_CCVER} \ 303 CCVER=${WORLD_CCVER} \ 304 LDVER=${WORLD_LDVER} \ 305 BINUTILSVER=${WORLD_BINUTILSVER} 306 307WMAKEENV= ${CROSSENV} \ 308 DESTDIR=${WORLDDEST} \ 309 _SHLIBDIRPREFIX=${WORLDDEST} \ 310 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 311 M4=${BTOOLSDEST}/usr/bin/m4 \ 312 PATH=${STRICTTMPPATH} 313 314WMAKE= ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD 315 316# install stage 317# 318IMAKEENV= ${CROSSENV} \ 319 PATH=${STRICTTMPPATH} 320IMAKE= ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD 321 322# kernel stage 323# 324KMAKEENV= ${WMAKEENV} 325 326# buildworld 327# 328# Attempt to rebuild the entire system, with reasonable chance of 329# success, regardless of how old your existing system is. 330# 331_worldtmp: _cleantmp _mtreetmp 332.ORDER: _cleantmp _mtreetmp 333 334_cleantmp: 335 @echo 336 @echo "--------------------------------------------------------------" 337 @echo ">>> Rebuilding the temporary build tree" 338 @echo "--------------------------------------------------------------" 339.if !defined(NOCLEAN) 340 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 341.else 342 # XXX - These two can depend on any header file. 343 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 344 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 345.endif 346 347_mtreetmp: 348 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 349.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 350 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 351 -p ${_dir}/ > /dev/null 352 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 353 -p ${_dir}/usr > /dev/null 354.endfor 355 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 356 -p ${WORLDDEST}/usr/include > /dev/null 357 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 358 359_bootstrap-tools: 360 @echo 361 @echo "--------------------------------------------------------------" 362 @echo ">>> stage 1: bootstrap tools" 363 @echo "--------------------------------------------------------------" 364 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 365_cleanobj: 366 @echo 367 @echo "--------------------------------------------------------------" 368 @echo ">>> stage 2a: cleaning up the object tree" 369 @echo "--------------------------------------------------------------" 370 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 371_obj: 372 @echo 373 @echo "--------------------------------------------------------------" 374 @echo ">>> stage 2b: rebuilding the object tree" 375 @echo "--------------------------------------------------------------" 376 cd ${.CURDIR}; ${WMAKE} par-obj 377_build-tools: 378 @echo 379 @echo "--------------------------------------------------------------" 380 @echo ">>> stage 2c: build tools" 381 @echo "--------------------------------------------------------------" 382 cd ${.CURDIR}; ${TMAKE} build-tools 383_cross-tools: 384 @echo 385 @echo "--------------------------------------------------------------" 386 @echo ">>> stage 3: cross tools" 387 @echo "--------------------------------------------------------------" 388 cd ${.CURDIR}; ${XMAKE} cross-tools 389_includes: 390 @echo 391 @echo "--------------------------------------------------------------" 392 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 393 @echo "--------------------------------------------------------------" 394 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 395_libraries: 396 @echo 397 @echo "--------------------------------------------------------------" 398 @echo ">>> stage 4b: building libraries" 399 @echo "--------------------------------------------------------------" 400 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries 401_depend: 402 @echo 403 @echo "--------------------------------------------------------------" 404 @echo ">>> stage 4c: make dependencies" 405 @echo "--------------------------------------------------------------" 406 cd ${.CURDIR}; ${WMAKE} par-depend 407everything: 408 @echo 409 @echo "--------------------------------------------------------------" 410 @echo ">>> stage 4d: building everything.." 411 @echo "--------------------------------------------------------------" 412 cd ${.CURDIR}; ${WMAKE} all 413_bwinit: 414 @echo "--------------------------------------------------------------" 415 @echo ">>> starting buildworld target" 416 @echo "--------------------------------------------------------------" 417_bwdone: 418 @echo "--------------------------------------------------------------" 419 @echo ">>> buildworld target complete" 420 @echo "--------------------------------------------------------------" 421_qwinit: 422 @echo "--------------------------------------------------------------" 423 @echo ">>> starting quickworld target" 424 @echo "--------------------------------------------------------------" 425_qwdone: 426 @echo "--------------------------------------------------------------" 427 @echo ">>> quickworld target complete" 428 @echo "--------------------------------------------------------------" 429_iwinit: 430 @echo "--------------------------------------------------------------" 431 @echo ">>> starting installworld target" 432 @echo "--------------------------------------------------------------" 433 434# note: buildworld no longer depends on _cleanobj because we rm -rf the 435# entire object tree and built the bootstrap tools in a different location. 436# 437# buildworld - build everything from scratch 438# quickworld - skip the bootstrap, build, and cross-build steps 439# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 440# 441# note: we include _obj in realquickworld to prevent accidental creation 442# of files in /usr/src. 443 444WMAKE_TGTS= 445.if !defined(SUBDIR_OVERRIDE) 446WMAKE_TGTS+= _worldtmp _bootstrap-tools 447.endif 448WMAKE_TGTS+= _obj _build-tools 449.if !defined(SUBDIR_OVERRIDE) 450WMAKE_TGTS+= _cross-tools 451.endif 452WMAKE_TGTS+= _includes _libraries _depend everything 453 454buildworld: _bwinit ${WMAKE_TGTS} _bwdone 455 456quickworld: _qwinit _mtreetmp _obj _includes _libraries _depend everything _qwdone 457 458realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone 459 460crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 461 462.ORDER: _bwinit ${WMAKE_TGTS} _bwdone 463.ORDER: _obj _includes 464.ORDER: _qwinit _mtreetmp _obj 465.ORDER: installcheck backupworld-auto 466.ORDER: everything _qwdone 467 468# 469# installcheck 470# 471# Checks to be sure system is ready for installworld 472# 473installcheck: _iwinit 474 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false) 475 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false) 476 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false) 477.if !defined(OVERRIDE_CHECKS) 478.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 479 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac 480 @case `uname -r` in 1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) echo "Base is too old for a normal installworld, you need to use installworld-force" ; /usr/bin/false ; esac 481.endif 482.endif 483 484# 485# installworld 486# 487# Backs up the current world if ${AUTO_BACKUP} is writable. 488# Installs everything compiled by a 'buildworld'. 489# 490# Includes sleep/sync safety before running mkinitrd. 491 492installworld: installcheck 493 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1 494 @cd ${.CURDIR}; \ 495 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \ 496 ${IMAKE} backupworld-auto) || \ 497 echo "Cannot write to ${AUTO_BACKUP} - world not backed up" 498 499 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 500 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/ 501 sync 502 @echo "--------------------------------------------------------------" 503 @echo ">>> installworld target complete" 504 @echo "--------------------------------------------------------------" 505 @echo "If things work as expected after a full reboot, consider updating the rescue" 506 @echo "image with 'make rescue'. Do not do it until after rebooting." 507 508installworld-force: 509 @echo "Doing a forced installworld. This will install to a temporary directory," 510 @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/" 511 @echo "and finally will issue a normal installworld. Starting in 5 seconds.". 512 @echo "^C to abort." 513 sleep 1 514 rm -rf /usr/obj/temp > /dev/null 2>& 1 || chflags -R noschg /usr/obj/temp 515 rm -rf /usr/obj/temp 516 mkdir -p /usr/obj/temp/cpdup/bin 517 (cd ${.CURDIR}/bin/cpdup; make clean; make obj; make clean; make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE) 518 @echo "XXXXXXXXX Installing to temporary XXXXXXXXX" 519 @sleep 1 520 (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1) 521 @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX" 522 @sleep 1 523 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin 524 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin 525 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib 526 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin 527 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin 528 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib 529 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec 530 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec 531 @echo "XXXXXXXXX Doing final installworld XXXXXXXX" 532 sleep 5 533 (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE) 534 (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE) 535 536# Create a rescue image. We no longer do this automatically for several 537# reasons, primarily that users have had serious issue with mismatched 'vn' 538# vs the kldload image that can crash the system. But also, the rescue image 539# is intended to be a rescue image, it is a bad idea to update it at the 540# same time the world is installed. 541# 542rescue: 543 mkinitrd -b ${DESTDIR}/boot 544 545# 546# reinstall 547# 548# If you have a build server, you can NFS mount the source and obj directories 549# and do a 'make reinstall' on the *client* to install new binaries from the 550# most recent server build. 551# 552reinstall: 553 @echo "--------------------------------------------------------------" 554 @echo ">>> Making hierarchy" 555 @echo "--------------------------------------------------------------" 556 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy 557 @echo 558 @echo "--------------------------------------------------------------" 559 @echo ">>> Installing everything.." 560 @echo "--------------------------------------------------------------" 561 cd ${.CURDIR}; make -f Makefile.inc1 install 562 563# 564# buildkernel, nativekernel, quickkernel, realquickkernel, and installkernel 565# 566# Which kernels to build and/or install is specified by setting 567# KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed. 568# Only the existing (depending TARGET) config files are used 569# for building kernels and only the first of these is designated 570# as the one being installed. 571# 572# You can specify INSTALLSTRIPPED=1 if you wish the installed 573# kernel and modules to be stripped of its debug info (required 574# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 575# if you only want to strip the modules of their debug info. These 576# only apply if you have DEBUG=-g in your kernel config or make line. 577# 578# Note that we have to use TARGET instead of TARGET_ARCH when 579# we're in kernel-land. Since only TARGET_ARCH is (expected) to 580# be set to cross-build, we have to make sure TARGET is set 581# properly. 582 583.if !defined(KERNCONF) && defined(KERNEL) 584KERNCONF= ${KERNEL} 585KERNWARN= yes 586.else 587# XXX makeshift fix to build the right kernel for the (target) architecture 588# We should configure this in the platform files somehow 589.if ${TARGET_ARCH} == "x86_64" 590KERNCONF?= X86_64_GENERIC 591.endif 592.endif 593INSTKERNNAME?= kernel 594 595KRNLSRCDIR= ${.CURDIR}/sys 596KRNLCONFDIR= ${KRNLSRCDIR}/config 597KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 598KERNCONFDIR?= ${KRNLCONFDIR} 599 600BUILDKERNELS= 601INSTALLKERNEL= 602.for _kernel in ${KERNCONF} 603.if exists(${KERNCONFDIR}/${_kernel}) 604BUILDKERNELS+= ${_kernel} 605.if empty(INSTALLKERNEL) 606INSTALLKERNEL= ${_kernel} 607.endif 608.endif 609.endfor 610 611# kernel version numbers survive rm -rf 612# 613.for _kernel in ${BUILDKERNELS} 614.if exists(${KRNLOBJDIR}/${_kernel}/version) 615KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 616.endif 617.endfor 618 619# 620# buildkernel 621# 622# Builds all kernels defined by BUILDKERNELS. 623# 624bk_tools: 625 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 626 echo "You must buildworld before buildkernel. If you wish"; \ 627 echo "to build a kernel using native tools, config it manually"; \ 628 echo "or use the nativekernel target if you are in a rush"; \ 629 /usr/bin/false; \ 630 fi 631 632maybe_bk_tools: 633.for _kernel in ${BUILDKERNELS} 634 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 635 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 636 echo "The kernel was build using buildworld tools which no" ; \ 637 echo "longer appear to exist, (real)quickkernel failed!" ; \ 638 /usr/bin/false; \ 639 fi; \ 640 fi 641.endfor 642 643bk_build_list: 644.if empty(BUILDKERNELS) 645 @echo ">>> ERROR: Missing kernel configuration file(s)." 646 @echo ">>> ${KERNCONF} not found in ${KERNCONFDIR}." 647 @false 648.endif 649 650bk_kernwarn: 651.if defined(KERNWARN) 652 @echo "--------------------------------------------------------------" 653 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 654 @echo "--------------------------------------------------------------" 655 @sleep 3 656.endif 657 @echo 658 659# The buildkernel target rebuilds the specified kernels from scratch 660# using the crossbuild tools generated by the last buildworld. It is 661# the safest (but also the most time consuming) way to build a new kernel. 662# 663buildkernel: bk_tools bk_build_list bk_kernwarn 664.for _kernel in ${BUILDKERNELS} 665 @echo "--------------------------------------------------------------" 666 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 667 @echo "--------------------------------------------------------------" 668 @echo "===> ${_kernel}" 669.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 670 rm -rf ${KRNLOBJDIR}/${_kernel} 671.else 672 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 673 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 674 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 675.endif 676 mkdir -p ${KRNLOBJDIR} 677.if !defined(NO_KERNELCONFIG) 678 cd ${KRNLCONFDIR}; \ 679 PATH=${STRICTTMPPATH} \ 680 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 681 ${KERNCONFDIR}/${_kernel} 682.endif 683.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 684 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 685.endif 686 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 687.if !defined(NO_KERNELDEPEND) 688 cd ${KRNLOBJDIR}/${_kernel}; \ 689 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend 690.endif 691 cd ${KRNLOBJDIR}/${_kernel}; \ 692 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all 693 @echo "--------------------------------------------------------------" 694 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 695 @echo "--------------------------------------------------------------" 696.endfor 697 698# The nativekernel target rebuilds the specified kernels from scratch 699# using the system's standard compiler rather than using the crossbuild 700# tools generated by the last buildworld. This is fairly safe if your 701# system is reasonable up-to-date. 702# 703nativekernel: bk_build_list bk_kernwarn 704.for _kernel in ${BUILDKERNELS} 705 @echo "--------------------------------------------------------------" 706 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 707 @echo "--------------------------------------------------------------" 708 @echo "===> ${_kernel}" 709.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 710 rm -rf ${KRNLOBJDIR}/${_kernel} 711.else 712 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 713 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 714 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 715.endif 716 mkdir -p ${KRNLOBJDIR} 717.if !defined(NO_KERNELCONFIG) 718 cd ${KRNLCONFDIR}; \ 719 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 720 ${KERNCONFDIR}/${_kernel} 721.endif 722.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 723 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 724.endif 725 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 726.if !defined(NO_KERNELDEPEND) 727 cd ${KRNLOBJDIR}/${_kernel}; \ 728 make KERNEL=${INSTKERNNAME} depend 729.endif 730 cd ${KRNLOBJDIR}/${_kernel}; \ 731 make KERNEL=${INSTKERNNAME} all 732 @echo "--------------------------------------------------------------" 733 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 734 @echo "--------------------------------------------------------------" 735.endfor 736 737# The (real)quickkernel target rebuilds the specified kernels as quickly 738# as possible. It will use the native tools or the buildworld cross tools 739# based on whether the kernel was originally generated via buildkernel or 740# nativekernel. Config is rerun but the object hierarchy is not rebuilt. 741# realquickkernel skips the depend step (analogous to realquickworld). 742# 743quickkernel realquickkernel: maybe_bk_tools bk_build_list bk_kernwarn 744.for _kernel in ${BUILDKERNELS} 745 @echo "--------------------------------------------------------------" 746 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 747 @echo "--------------------------------------------------------------" 748 @echo "===> ${_kernel}" 749.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 750.if !defined(NO_KERNELCONFIG) 751 cd ${KRNLCONFDIR}; \ 752 PATH=${STRICTTMPPATH} \ 753 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 754 ${KERNCONFDIR}/${_kernel} 755.endif 756.if !defined(NO_KERNELDEPEND) && !target(realquickkernel) 757 cd ${KRNLOBJDIR}/${_kernel}; \ 758 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend 759.endif 760 cd ${KRNLOBJDIR}/${_kernel}; \ 761 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all 762.else 763.if !defined(NO_KERNELCONFIG) 764 cd ${KRNLCONFDIR}; \ 765 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 766 ${KERNCONFDIR}/${_kernel} 767.endif 768.if !defined(NO_KERNELDEPEND) && !target(realquickkernel) 769 cd ${KRNLOBJDIR}/${_kernel}; \ 770 make KERNEL=${INSTKERNNAME} depend 771.endif 772 cd ${KRNLOBJDIR}/${_kernel}; \ 773 make KERNEL=${INSTKERNNAME} all 774.endif 775 @echo "--------------------------------------------------------------" 776 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 777 @echo "--------------------------------------------------------------" 778.endfor 779 780 781# installkernel 782# 783# Install the kernel defined by INSTALLKERNEL 784# 785installkernel reinstallkernel: 786 @echo "--------------------------------------------------------------" 787 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`" 788 @echo "--------------------------------------------------------------" 789.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run) 790 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 791 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 792.else 793 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 794 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 795.endif 796 @echo "--------------------------------------------------------------" 797 @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`" 798 @echo "--------------------------------------------------------------" 799 800# 801# most 802# 803# Build most of the user binaries on the existing system libs and includes. 804# 805most: 806 @echo "--------------------------------------------------------------" 807 @echo ">>> Building programs only" 808 @echo "--------------------------------------------------------------" 809.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 810 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all 811.endfor 812 813# 814# installmost 815# 816# Install the binaries built by the 'most' target. This does not include 817# libraries or include files. 818# 819installmost: 820 @echo "--------------------------------------------------------------" 821 @echo ">>> Installing programs only" 822 @echo "--------------------------------------------------------------" 823.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 824 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install 825.endfor 826 827# 828# ------------------------------------------------------------------------ 829# 830# From here onwards are utility targets used by the 'make world' and 831# related targets. If your 'world' breaks, you may like to try to fix 832# the problem and manually run the following targets to attempt to 833# complete the build. Beware, this is *not* guaranteed to work, you 834# need to have a pretty good grip on the current state of the system 835# to attempt to manually finish it. If in doubt, 'make world' again. 836# 837 838# bootstrap-tools: Build all tools required to build all tools. Note that 839# order is important in a number of cases and also note that the bootstrap 840# and build tools stages have access to earlier binaries they themselves 841# had generated. 842# 843# patch: older patch's do not have -i. This program must be built 844# first so other bootstrap tools that need to apply patches 845# can use it. 846# [x]install: dependancies on various new install features 847# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 848# envs are not compatible with older objformat binaries. 849# 850.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 851_strfile= games/fortune/strfile 852.endif 853 854# BSTRAPDIRS1 - must be built in strict order, no parallelism 855# 856# order is very important. yacc before m4 before flex. flex exec's m4, 857# m4's parser file needs the latest byacc (insanity!). 858# 859BSTRAPDIRS1= ${_strfile} \ 860 usr.bin/patch \ 861 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \ 862 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \ 863 bin/hostname bin/kill \ 864 usr.bin/yacc usr.bin/m4 usr.bin/localedef \ 865 usr.bin/uudecode usr.bin/xinstall \ 866 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \ 867 usr.bin/find usr.bin/flex 868 869# BSTRAPDIRS2 - may built in parallel 870# 871BSTRAPDIRS2= \ 872 usr.bin/sed usr.bin/uname usr.bin/touch \ 873 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 874 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 875 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \ 876 usr.bin/uuencode usr.bin/cap_mkdb usr.bin/true usr.bin/false \ 877 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \ 878 usr.bin/tail usr.bin/unifdef usr.bin/tic \ 879 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 880 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \ 881 gnu/usr.bin/grep usr.bin/sort usr.bin/gzip usr.bin/bzip2 \ 882 usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch 883 884bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2 885 touch ${BTOOLSDEST}/.bootstrap_done 886 887bootstrap-tools-before: 888 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 889 890bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/} 891 892bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/} 893 894.ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2 895 896.ORDER: ${BSTRAPDIRS1:S/^/bstrap-/} 897 898.for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2} 899bstrap-${_tool}! 900 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 901 cd ${.CURDIR}/${_tool}; \ 902 make DIRPRFX=${_tool}/ obj; \ 903 make DIRPRFX=${_tool}/ depend; \ 904 make DIRPRFX=${_tool}/ all; \ 905 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 906.endfor 907 908# build-tools: Build special purpose build tools. 909# 910# XXX we may be able to remove or consolidate this into bootstrap-tools 911# now that we have the native helper (.nx/.no) infrastructure. 912# 913.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 914_share= share/syscons/scrnmaps 915.endif 916 917# XXX we should separate this into new Makefile.inc2. 918# Just to prepare for reduction of ORDER: that slows down parallel crossworld. 919 920# Make sure Makefile.inc1 logic is intact. 921.if !defined(WORLD_ALTCOMPILER) 922.warning undefined WORLD_ALTCOMPILER 923.endif 924 925_gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc 926_gcc50_cross= gnu/usr.bin/cc50 927_gcc50_tools= gnu/usr.bin/cc50/cc_prep gnu/usr.bin/cc50/cc_tools 928.if !defined(NO_ALTCOMPILER) 929. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 930_gcc47_cross= gnu/usr.bin/cc47 931_gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools 932_altcompiler_cross+= ${_gcc47_cross} 933_altcompiler_tools+= _gcc47_tools 934. endif 935.endif 936_custom_cross= libexec/customcc 937_binutils= gnu/usr.bin/${WORLD_BINUTILSVER} 938 939.for _atools in ${_altcompiler_tools} 940BTOOLSDIRS+= ${${_atools}} 941.endfor 942BTOOLSDIRS+= ${_gcc50_tools} 943BTOOLSDIRS+= ${_share} 944 945build-tools: build-tools-targets 946 touch ${BTOOLSDEST}/.build_done 947 948build-tools-targets: ${BTOOLSDIRS:S/^/btools-/} 949 950.for _atools in ${_altcompiler_tools} 951.ORDER: ${${_atools}:C/^/btools-/} 952.endfor 953.ORDER: ${_gcc50_tools:S/^/btools-/} 954 955.for _tool in ${BTOOLSDIRS} 956btools-${_tool}! 957 ${ECHODIR} "===> ${_tool} (build-tools)"; \ 958 cd ${.CURDIR}/${_tool}; \ 959 make DIRPRFX=${_tool}/ obj; \ 960 make DIRPRFX=${_tool}/ depend; \ 961 make DIRPRFX=${_tool}/ all; \ 962 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 963.endfor 964 965# 966# cross-tools: Build cross-building tools 967# 968.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 969_btxld= usr.sbin/btxld 970.endif 971 972CTOOLSDIRS= ${_btxld} ${_binutils} \ 973 usr.bin/objformat usr.bin/crunch/crunchide \ 974 ${_gcc_common_cross} \ 975 ${_altcompiler_cross} \ 976 ${_gcc50_cross} ${_custom_cross} 977 978cross-tools: cross-tools-targets 979 touch ${CTOOLSDEST}/.cross_done 980 981cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/} 982 983.for _tool in ${CTOOLSDIRS} 984ctools-${_tool}! 985 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 986 cd ${.CURDIR}/${_tool}; \ 987 make DIRPRFX=${_tool}/ obj; \ 988 make DIRPRFX=${_tool}/ depend; \ 989 make DIRPRFX=${_tool}/ all; \ 990 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 991.endfor 992 993# 994# hierarchy - ensure that all the needed directories are present 995# 996hierarchy: 997 cd ${.CURDIR}/etc; make distrib-dirs 998 999# 1000# libraries - build all libraries, and install them under ${DESTDIR}. 1001# 1002# The list of libraries with dependents (${_prebuild_libs}) and their 1003# interdependencies (__L) are built automatically by the 1004# ${.CURDIR}/tools/make_libdeps.sh script. 1005# 1006# .makeenv does not work when bootstrapping from 4.x, so we must be sure 1007# to specify the correct CCVER or 'cc' will not exec the correct compiler. 1008# 1009libraries: 1010 cd ${.CURDIR}; \ 1011 HOST_CCVER=${HOST_CCVER} CCVER=gcc50 \ 1012 make -f Makefile.inc1 _startup_libs50 -DSYSBUILD; 1013.if !defined(NO_ALTCOMPILER) 1014. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 1015 cd ${.CURDIR}; \ 1016 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \ 1017 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD; 1018. endif 1019.endif 1020 cd ${.CURDIR}; \ 1021 make -f Makefile.inc1 _startup_libs -DSYSBUILD; \ 1022 make -f Makefile.inc1 _prebuild_libs -DSYSBUILD; \ 1023 make -f Makefile.inc1 _generic_libs -DSYSBUILD; 1024 touch ${WORLDDEST}/.libraries_done 1025 1026# These dependencies are not automatically generated: 1027# 1028# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all 1029# shared libraries for ELF. The target for _startup_libsXX is 1030# specifically built using gccXX. 1031# 1032.if !defined(NO_ALTCOMPILER) 1033_startup_libs47= gnu/usr.bin/cc47/cc_prep \ 1034 gnu/usr.bin/cc47/cc_tools \ 1035 gnu/lib/gcc47/csu \ 1036 gnu/lib/gcc47/libgcc \ 1037 gnu/lib/gcc47/libgcc_eh \ 1038 gnu/lib/gcc47/libgcc_pic 1039. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 1040_startup_libs_alt+= _startup_libs47 1041. endif 1042.endif 1043_startup_libs50= gnu/usr.bin/cc50/cc_prep \ 1044 gnu/usr.bin/cc50/cc_tools \ 1045 gnu/lib/gcc50/csu \ 1046 gnu/lib/gcc50/libgcc \ 1047 gnu/lib/gcc50/libgcc_eh \ 1048 gnu/lib/gcc50/libgcc_pic 1049_startup_libs= lib/csu lib/libc lib/libc_rtld 1050 1051_prebuild_libs= lib/libbz2 lib/libz 1052_prebuild_libs+= lib/libutil 1053 1054_prebuild_libs+= lib/libpcap 1055 1056_generic_libs= gnu/lib 1057 1058_prebuild_libs+= lib/libcrypt lib/libmd \ 1059 lib/libncurses/libncurses 1060 1061lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 1062 1063_generic_libs+= lib 1064 1065.if !defined(NO_CRYPT) 1066_prebuild_libs+= lib/librecrypto lib/libressl 1067_prebuild_libs+= lib/libssh 1068lib/libssh__L: lib/librecrypto__L lib/libz__L 1069lib/libopie__L: lib/librecrypto__L 1070.endif 1071 1072_prebuild_libs+= lib/libopie 1073 1074_prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \ 1075 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \ 1076 lib/libpthread lib/liblzma lib/libprop lib/libdevattr 1077 1078_generic_libs+= usr.bin/flex/lib 1079 1080.for _alib in ${_startup_libs_alt} 1081__startup_alibs+= ${${_alib}} 1082.endfor 1083 1084.for _lib in ${__startup_alibs} ${_startup_libs50} \ 1085 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 1086${_lib}__L: .PHONY 1087.if exists(${.CURDIR}/${_lib}) 1088 @${ECHODIR} "===> ${_lib}"; \ 1089 cd ${.CURDIR}/${_lib}; \ 1090 echo "STEP DEP ${_lib}"; \ 1091 make DIRPRFX=${_lib}/ depend; \ 1092 echo "STEP ALL ${_lib}"; \ 1093 make DIRPRFX=${_lib}/ all; \ 1094 echo "STEP INSTALL ${_lib}"; \ 1095 make DIRPRFX=${_lib}/ install; \ 1096 echo "STEP DONE ${_lib}"; 1097.else 1098.warning missing ${.CURDIR}/${_lib} directory. 1099.endif 1100.endfor 1101 1102_startup_libs: ${_startup_libs:S/$/__L/} 1103.for _alib in ${_startup_libs_alt} 1104${_alib}: ${${_alib}:C/$/__L/} 1105.endfor 1106_startup_libs50: ${_startup_libs50:S/$/__L/} 1107_prebuild_libs: ${_prebuild_libs:S/$/__L/} 1108_generic_libs: ${_generic_libs:S/$/__L/} 1109 1110# library targets must be ordered because there are inter-library 1111# races (e.g. generation of tconfig.h) 1112# 1113.for _alib in ${_startup_libs_alt} 1114.ORDER: ${${_alib}:C/$/__L/} 1115.endfor 1116.ORDER: ${_startup_libs50:S/$/__L/} 1117.ORDER: ${_startup_libs:S/$/__L/} 1118.ORDER: ${_prebuild_libs:S/$/__L/} 1119.ORDER: ${_generic_libs:S/$/__L/} 1120 1121.for __target in clean cleandepend cleandir obj depend includes 1122.for entry in ${SUBDIR} 1123${entry}.${__target}__D: .PHONY 1124 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 1125 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 1126 edir=${entry}.${MACHINE_ARCH}; \ 1127 cd ${.CURDIR}/$${edir}; \ 1128 else \ 1129 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 1130 edir=${entry}; \ 1131 cd ${.CURDIR}/$${edir}; \ 1132 fi; \ 1133 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 1134.endfor 1135par-${__target}: ${SUBDIR:C/$/.${__target}__D/} 1136.ORDER: ${SUBDIR:C/$/.${__target}__D/} 1137.endfor 1138.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 1139 1140# The wmake target is used by /usr/bin/wmake to run make in a 1141# world build environment. 1142# 1143wmake: 1144 @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD' 1145 1146wmakeenv: 1147 @echo '${WMAKEENV} /bin/sh' 1148 1149bmake: 1150 @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD' 1151 1152bmakeenv: 1153 @echo '${BMAKEENV} /bin/sh' 1154 1155tmake: 1156 @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD' 1157 1158tmakeenv: 1159 @echo '${TMAKEENV} /bin/sh' 1160 1161xmake: 1162 @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD' 1163 1164xmakeenv: 1165 @echo '${XMAKEENV} /bin/sh' 1166 1167backupworld: backup-clean 1168 @mkdir -p ${WORLD_BACKUP} 1169.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \ 1170 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \ 1171 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec)) 1172 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \ 1173 --options gzip:compression-level=1 \ 1174 sbin bin usr/sbin usr/bin usr/lib usr/libexec 1175.endif 1176 1177backupworld-auto: 1178.if !defined(NO_BACKUP) 1179 rm -f ${AUTO_BACKUP}/binaries.tar.gz 1180 @mkdir -p ${AUTO_BACKUP} 1181.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \ 1182 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \ 1183 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec)) 1184 /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \ 1185 --options gzip:compression-level=1 \ 1186 sbin bin usr/sbin usr/bin usr/lib usr/libexec 1187.endif 1188.endif 1189 1190backup-auto-clean: 1191 rm -f ${AUTO_BACKUP}/binaries.tar.gz 1192 1193backup-clean: 1194 rm -f ${WORLD_BACKUP}/binaries.tar.gz 1195 1196restoreworld: 1197.if !exists(${WORLD_BACKUP}/binaries.tar.gz) 1198 @echo "There does not seem to be a valid archive present." 1199.else 1200 @echo "Restoring system binaries from manual backup archive..." 1201 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \ 1202 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \ 1203 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec 1204 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ 1205.endif 1206 1207restoreworld-auto: 1208.if !exists(${AUTO_BACKUP}/binaries.tar.gz) 1209 @echo "There does not seem to be a valid archive present." 1210.else 1211 @echo "Restoring system binaries from auto-backup archive..." 1212 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \ 1213 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \ 1214 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec 1215 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ 1216.endif 1217 1218# Take advantage of bmake error response 1219# 1220MAKE_PRINT_VAR_ON_ERROR= \ 1221 .CURDIR \ 1222 .OBJDIR \ 1223 LD_LIBRARY_PATH \ 1224 MACHINE_ARCH \ 1225 MACHINE \ 1226 MAKEFILE \ 1227 WORLD_ALTCOMPILER \ 1228 .TARGETS \ 1229 .ERROR_TARGET \ 1230 .MAKE.LEVEL 1231 1232.include <bsd.subdir.mk> 1233