1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# 4# This file defines the user-driven targets. 5# 6# Standard targets are documented in the makefiles in /usr/share/mk and include: 7# obj depend all install clean cleandepend cleanobj 8# 9# Build-time options are documented in make.conf(5). 10# 11 12DFLYVERSION!= awk '/^\#define[[:blank:]]__DragonFly_version/ {print $$3}' \ 13 < ${.CURDIR}/sys/sys/param.h 14 15OSREL!= echo ${DFLYVERSION} | \ 16 awk '{a=int($$1/100000); b=int(($$1-(a*100000))/100); \ 17 print a "." b}' 18 19# Put initial settings here. 20SUBDIR= 21 22# /libexec/ld-elf.so.2 needs to be installed first 23# Otherwise, install(1) beeing a dynamically linked binary will fail 24# during the first upgrade from a static to a dynamic world 25.if exists(${.CURDIR}/libexec) 26SUBDIR+= libexec 27.endif 28 29# We need to do include and lib early. 30# 31.if exists(${.CURDIR}/include) 32SUBDIR+= include 33.endif 34.if exists(${.CURDIR}/lib) 35SUBDIR+= lib 36.endif 37 38.if exists(${.CURDIR}/bin) 39SUBDIR+= bin 40.endif 41.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 42SUBDIR+= games 43.endif 44.if exists(${.CURDIR}/gnu) 45SUBDIR+= gnu 46.endif 47.if exists(${.CURDIR}/sbin) 48SUBDIR+= sbin 49.endif 50.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 51SUBDIR+= share 52.endif 53.if exists(${.CURDIR}/sys) 54SUBDIR+= sys 55.endif 56.if exists(${.CURDIR}/usr.bin) 57SUBDIR+= usr.bin 58.endif 59.if exists(${.CURDIR}/usr.sbin) 60SUBDIR+= usr.sbin 61.endif 62 63.if exists(${.CURDIR}/etc) 64SUBDIR+= etc 65.endif 66 67# These are last, since it is nice to at least get the base system 68# rebuilt before you do them. 69.if defined(LOCAL_DIRS) 70.for _DIR in ${LOCAL_DIRS} 71.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 72SUBDIR+= ${_DIR} 73.endif 74.endfor 75.endif 76 77.if defined(SUBDIR_OVERRIDE) 78SUBDIR= ${SUBDIR_OVERRIDE} 79.endif 80 81.if defined(NOCLEANDIR) 82CLEANDIR= clean cleandepend 83.else 84CLEANDIR= cleandir 85.endif 86 87.if defined(NO_CLEAN) 88NOCLEAN= # defined 89.endif 90 91# Object directory base in primary make. Note that when we rerun make 92# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 93# subdirectory because the rest of the build system needs it that way. 94# The original object directory base is saved in OBJTREE. 95# 96MAKEOBJDIRPREFIX?= /usr/obj 97OBJTREE?= ${MAKEOBJDIRPREFIX} 98 99# Used for stage installs and pathing 100# 101DESTDIRBASE:= ${OBJTREE}${.CURDIR} 102 103# Remove DESTDIR from MAKEFLAGS. It is present in the environment 104# anyhow, and we need to be able to override it for stage installs 105.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*} 106 107# This section sets the tools used to build the world/kernel 108WORLD_CCVER?= gcc80 109WORLD_LDVER?= ld.gold 110WORLD_BINUTILSVER?= binutils227 111 112# Set the backup parameters if they are not already defined 113# 114WORLD_BACKUP?= /var/backups/world_backup 115AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR} 116 117TARGET_ARCH?= ${MACHINE_ARCH} 118.if ${TARGET_ARCH} == ${MACHINE_ARCH} 119TARGET?= ${MACHINE} 120.else 121TARGET?= ${TARGET_ARCH} 122.endif 123.if make(buildworld) 124BUILD_ARCH!= sysctl -n hw.machine_arch 125 126# temporary until everybody has converted to x86_64 127.if ${BUILD_ARCH} == "amd64" 128BUILD_ARCH= x86_64 129.endif 130 131.if ${MACHINE_ARCH} != ${BUILD_ARCH} 132.error To cross-build, set TARGET_ARCH. 133.endif 134.endif 135 136# XXX this is ugly and we need to come up with a nicer solution 137.if !defined(TARGET_PLATFORM) 138.if ${TARGET_ARCH} == "x86_64" 139TARGET_PLATFORM= pc64 140.else 141.error Unknown target architecture. 142.endif 143.endif 144 145THREAD_LIB?= thread_xu 146 147# BTOOLS (Natively built) All non-cross-development tools that the 148# main build needs. This includes things like 'mkdir' and 'rm'. 149# We will not use the native system's exec path once we start 150# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 151# 152# CTOOLS (Natively built) Cross development tools which are specific 153# to the target architecture. 154# 155# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 156# CTOOLS. 157# 158# MACHINE_PLATFORM Platform Architecture we are building on 159# MACHINE Machine Architecture (usually the same as MACHINE_ARCH) 160# MACHINE_ARCH CPU Architecture we are building on 161# 162# TARGET_PLATFORM Platform Architecture we are building for 163# TARGET Machine Architecture we are building for 164# TARGET_ARCH CPU Architecture we are building for 165# 166BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 167CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 168WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 169 170# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 171# cross-tools stages to augment the existing command path to access newer 172# versions of certain utilities that the cross-tools stage might expect. 173# 174BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/sbin:${BTOOLSDEST}/bin 175 176# The cross-tools path containing the cross-tools to cross build the 177# ultimate world. 178# 179CTOOLSPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/sbin:${CTOOLSDEST}/bin 180 181# The strict temporary command path contains all binaries required 182# by the buildworld system after the cross-tools stage. 183# 184# NOTE: Append '/usr/local/bin:/usr/pkg/bin' to support external compilers. 185# See compilers.conf(5) man page for more info. 186# 187STRICTTMPPATH= ${CTOOLSPATH}:${BTOOLSPATH}:/usr/local/bin:/usr/pkg/bin 188 189TMPDIR?= /tmp 190TMPPID!= echo $$$$ 191 192# 193# Building a world goes through the following stages 194# 195# 1. bootstrap-tool stage [BMAKE] 196# This stage is responsible for creating programs that 197# are needed for backward compatibility reasons. They 198# are not built as cross-tools. 199# 2. build-tool stage [TMAKE] 200# This stage is responsible for creating the object 201# tree and building any tools that are needed during 202# the build process. 203# 3. cross-tool stage [XMAKE] 204# This stage is responsible for creating any tools that 205# are needed for cross-builds. A cross-compiler is one 206# of them. 207# 4. world stage [WMAKE] 208# This stage actually builds the world. 209# 5. install stage (optional) [IMAKE] 210# This stage installs a previously built world. 211# 212# In all cases we must carefully adjust the environment so the proper 213# tools and header files are used. 214# 215# NOTE: The M4 environment variable is used by the [f]lex binary to 216# override the location of the 'm4' binary. The override is 217# needed for certain buildworld version transitions, specifically 218# past a certain point in 3.3 because the older /usr/bin/m4 will 219# generate output that will blow up the newer [f]lex/yacc/bison 220# utilities. 221# 222 223# bootstrap-tool stage 224# 225BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 226 OBJTREE=${OBJTREE} \ 227 DESTDIR=${BTOOLSDEST} \ 228 LC_ALL=C \ 229 _SHLIBDIRPREFIX=${BTOOLSDEST} \ 230 PATH=${BTOOLSPATH}:${PATH} \ 231 M4=${BTOOLSDEST}/usr/bin/m4 \ 232 INSTALL="sh ${.CURDIR}/tools/install.sh" 233 234BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \ 235 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 236 -DNO_WERROR -DNO_NLS -DSYSBUILD 237 238# build-tool stage 239# 240TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 241 OBJTREE=${OBJTREE} \ 242 DESTDIR= \ 243 LC_ALL=C \ 244 PATH=${BTOOLSPATH}:${PATH} \ 245 M4=${BTOOLSDEST}/usr/bin/m4 \ 246 INSTALL="sh ${.CURDIR}/tools/install.sh" 247 248TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \ 249 -DNOSHARED -DSYSBUILD 250 251# cross-tool stage 252# 253# note: TOOLS_PREFIX points to the obj root holding the cross 254# compiler binaries, while USRDATA_PREFIX points to the obj root 255# holding the target environment (and also determines where cross-built 256# libraries, crt*.o, and include files are installed). 257# 258XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 259 OBJTREE=${OBJTREE} \ 260 DESTDIR=${CTOOLSDEST} \ 261 LC_ALL=C \ 262 _SHLIBDIRPREFIX=${CTOOLSDEST} \ 263 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 264 TOOLS_PREFIX=${CTOOLSDEST} \ 265 USRDATA_PREFIX=${WORLDDEST} \ 266 SELECT_LINKER=${WORLD_LDVER} \ 267 M4=${BTOOLSDEST}/usr/bin/m4 \ 268 PATH=${BTOOLSPATH}:${PATH} 269 270XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \ 271 -DBOOTSTRAPPING -DNOMAN -DNOSHARED -DSYSBUILD 272 273# world stage, note the strict path and note that TOOLS_PREFIX is left 274# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 275# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 276# for both binary and library paths, even though it is being compiled to 277# WORLDDEST. None of the programs in the world stage are ever actually 278# executed during the buildworld/installworld. 279# 280CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 281 OBJTREE=${OBJTREE} \ 282 MACHINE_ARCH=${TARGET_ARCH} \ 283 MACHINE=${TARGET} \ 284 MACHINE_PLATFORM=${TARGET_PLATFORM} \ 285 LC_ALL=C \ 286 OBJFORMAT_PATH=${CTOOLSDEST} \ 287 HOST_CCVER=${HOST_CCVER} \ 288 CCVER=${WORLD_CCVER} \ 289 LDVER=${WORLD_LDVER} \ 290 BINUTILSVER=${WORLD_BINUTILSVER} 291 292WMAKEENV= ${CROSSENV} \ 293 WORLDBUILD=1 \ 294 DESTDIR=${WORLDDEST} \ 295 _SHLIBDIRPREFIX=${WORLDDEST} \ 296 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 297 M4=${BTOOLSDEST}/usr/bin/m4 \ 298 PATH=${STRICTTMPPATH} 299 300WMAKE= ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD 301 302# install stage 303# 304IMAKEENV= ${CROSSENV} \ 305 PATH=${STRICTTMPPATH} 306IMAKE= ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD 307 308# kernel stage 309# 310KMAKEENV= ${WMAKEENV} 311 312# buildworld 313# 314# Attempt to rebuild the entire system, with reasonable chance of 315# success, regardless of how old your existing system is. 316# 317_worldtmp: _cleantmp _mtreetmp 318.ORDER: _cleantmp _mtreetmp 319 320_cleantmp: 321.if !defined(NOCLEAN) 322 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 323.else 324 # XXX - These two can depend on any header file. 325 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 326 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 327.endif 328 329_mtreetmp: 330 @echo 331 @echo "--------------------------------------------------------------" 332 @echo ">>> Rebuilding the temporary build tree" 333 @echo "--------------------------------------------------------------" 334 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 335.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 336 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 337 -p ${_dir}/ > /dev/null 338 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 339 -p ${_dir}/usr > /dev/null 340.endfor 341 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 342 -p ${WORLDDEST}/usr/include > /dev/null 343 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 344 345_bwinit: 346 @echo "--------------------------------------------------------------" 347 @echo ">>> starting buildworld target" 348 @echo "--------------------------------------------------------------" 349_bootstrap-tools: 350 @echo 351 @echo "--------------------------------------------------------------" 352 @echo ">>> stage 1: bootstrap tools" 353 @echo "--------------------------------------------------------------" 354 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 355_cleanobj: 356 @echo 357 @echo "--------------------------------------------------------------" 358 @echo ">>> stage 2a: cleaning up the object tree" 359 @echo "--------------------------------------------------------------" 360 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 361_obj: 362 @echo 363 @echo "--------------------------------------------------------------" 364 @echo ">>> stage 2b: rebuilding the object tree" 365 @echo "--------------------------------------------------------------" 366 cd ${.CURDIR}; ${WMAKE} par-obj 367_build-tools: 368 @echo 369 @echo "--------------------------------------------------------------" 370 @echo ">>> stage 2c: build tools" 371 @echo "--------------------------------------------------------------" 372 cd ${.CURDIR}; ${TMAKE} build-tools 373_cross-tools: 374 @echo 375 @echo "--------------------------------------------------------------" 376 @echo ">>> stage 3: cross tools" 377 @echo "--------------------------------------------------------------" 378 cd ${.CURDIR}; ${XMAKE} cross-tools 379_includes: 380 @echo 381 @echo "--------------------------------------------------------------" 382 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 383 @echo "--------------------------------------------------------------" 384 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 385_libraries: 386 @echo 387 @echo "--------------------------------------------------------------" 388 @echo ">>> stage 4b: building libraries" 389 @echo "--------------------------------------------------------------" 390 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries 391_depend: 392 @echo 393 @echo "--------------------------------------------------------------" 394 @echo ">>> stage 4c: make dependencies" 395 @echo "--------------------------------------------------------------" 396 cd ${.CURDIR}; ${WMAKE} par-depend 397everything: 398 @echo 399 @echo "--------------------------------------------------------------" 400 @echo ">>> stage 4d: building everything" 401 @echo "--------------------------------------------------------------" 402 cd ${.CURDIR}; ${WMAKE} all 403_initrd: 404 @echo 405 @echo "--------------------------------------------------------------" 406 @echo ">>> stage 5: building rescue and initrd" 407 @echo "--------------------------------------------------------------" 408.if !defined(NO_INITRD) 409 cd ${.CURDIR}/initrd; ${WMAKEENV} make all 410.endif 411_bwdone: 412 @echo "--------------------------------------------------------------" 413 @echo ">>> buildworld target complete" 414 @echo "--------------------------------------------------------------" 415_qwinit: 416 @echo "--------------------------------------------------------------" 417 @echo ">>> starting quickworld target" 418 @echo "--------------------------------------------------------------" 419_qwdone: 420 @echo "--------------------------------------------------------------" 421 @echo ">>> quickworld target complete" 422 @echo "--------------------------------------------------------------" 423_iwinit: 424 @echo "--------------------------------------------------------------" 425 @echo ">>> starting installworld target" 426 @echo "--------------------------------------------------------------" 427 428# note: buildworld no longer depends on _cleanobj because we rm -rf the 429# entire object tree and built the bootstrap tools in a different location. 430# 431# buildworld - build everything from scratch 432# quickworld - skip the bootstrap, build, and cross-build steps 433# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 434# 435# note: we include _obj in realquickworld to prevent accidental creation 436# of files in /usr/src. 437 438WMAKE_TGTS= 439.if !defined(SUBDIR_OVERRIDE) 440WMAKE_TGTS+= _worldtmp _bootstrap-tools 441.endif 442WMAKE_TGTS+= _obj _build-tools 443.if !defined(SUBDIR_OVERRIDE) 444WMAKE_TGTS+= _cross-tools 445.endif 446WMAKE_TGTS+= _includes _libraries _depend everything _initrd 447 448.if defined(WMAKE_TGTS_OVERRIDE) 449SUBDIR= 450WMAKE_TGTS= ${WMAKE_TGTS_OVERRIDE} 451.endif 452 453QMAKE_TGTS= _mtreetmp _obj _includes _libraries _depend everything _initrd 454 455buildworld: _bwinit ${WMAKE_TGTS} _bwdone 456 457quickworld: _qwinit ${QMAKE_TGTS} _qwdone 458 459realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone 460 461crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 462 463GENLOGDIR= /usr/obj${.CURDIR} 464.ORDER: build-all install-all 465 466# build-all 467# 468# build 469build-all: 470 @echo "Building world, log file in ${GENLOGDIR}/bw.out" 471 @mkdir -p ${GENLOGDIR} 472 @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildworld > ${GENLOGDIR}/bw.out 2>&1) 473 @sync 474 @echo "Building kernel, log file in ${GENLOGDIR}/bk.out" 475 @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildkernel > ${GENLOGDIR}/bk.out 2>&1) 476 @echo "build-all completed ok" 477 @sync 478 479install-all: 480 @echo "Installing kernel, log file in ${GENLOGDIR}/bk.out" 481 @mkdir -p ${GENLOGDIR} 482 @(cd ${.CURDIR}; ${MAKE} -j 1 installkernel >> ${GENLOGDIR}/bk.out 2>&1) 483 @sync 484 @echo "Installing world, log file in ${GENLOGDIR}/bw.out" 485 @(cd ${.CURDIR}; ${MAKE} -j 1 installworld >> ${GENLOGDIR}/bw.out 2>&1) 486 @sync 487 @echo "Upgrading world" 488 @(cd ${.CURDIR}; ${MAKE} -j 1 upgrade >> ${GENLOGDIR}/bw.out 2>&1) 489 @sync 490 @echo "install-all completed ok. reboot recommended and after that, " 491 @echo "if doing a major upgrade, pkg upgrade -f" 492 493.ORDER: _bwinit ${WMAKE_TGTS} _bwdone 494.ORDER: _obj _includes 495.ORDER: _qwinit _mtreetmp _obj 496.ORDER: installcheck backupworld-auto 497.ORDER: everything _qwdone 498 499 500# installcheck 501# 502# Checks to be sure system is ready for installworld 503# 504installcheck: _iwinit 505.for _user in _pflogd 506 @pw usershow ${_user} >/dev/null || { \ 507 echo "You need to run 'make preupgrade' first."; \ 508 /usr/bin/false; \ 509 } 510.endfor 511.for _group in _pflogd authpf 512 @pw groupshow ${_group} >/dev/null || { \ 513 echo "You need to run 'make preupgrade' first."; \ 514 /usr/bin/false; \ 515 } 516.endfor 517.if !defined(OVERRIDE_CHECKS) 518.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 519 @case `uname -r` in \ 520 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) \ 521 echo "You must upgrade your kernel to at least 1.5.4" \ 522 "and reboot before you can safely installworld," \ 523 "due to libc/system call ABI changes."; \ 524 /usr/bin/false; \ 525 esac 526 @case `uname -r` in \ 527 1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) \ 528 echo "The system is too old for a normal installworld," \ 529 "you need to use 'installworld-force'."; \ 530 /usr/bin/false; \ 531 esac 532.endif 533.endif 534 535# installworld 536# 537# Backs up the current world if ${AUTO_BACKUP} is writable. 538# Installs everything compiled by a 'buildworld'. 539# 540installworld: installcheck 541 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1 542 @cd ${.CURDIR}; \ 543 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \ 544 ${IMAKE} backupworld-auto) || \ 545 echo "Cannot write to ${AUTO_BACKUP} - world not backed up" 546 547 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 548 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc \ 549 ${DESTDIR}/etc/upgrade/ 550 cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL os-release 551.if !defined(NO_INITRD) 552 cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL initrd 553.endif 554 sync 555 @echo "--------------------------------------------------------------" 556 @echo ">>> installworld target complete" 557 @echo "--------------------------------------------------------------" 558 559os-release: 560 @echo "NAME=DragonFly" > ${DESTDIR}/etc/os-release 561 @echo "VERSION=${OSREL}-SYNTH" >> ${DESTDIR}/etc/os-release 562 @echo "VERSION_ID=${OSREL}" >> ${DESTDIR}/etc/os-release 563 @echo "ID=dragonfly" >> ${DESTDIR}/etc/os-release 564 @echo "ANSI_COLOR=\"0;32\"" >> ${DESTDIR}/etc/os-release 565 @echo "PRETTY_NAME=\"DragonFlyBSD ${OSREL}-SYNTH\"" >> ${DESTDIR}/etc/os-release 566 @echo "CPE_NAME=\"cpe:/o:dragonflybsd:dragonfly:${OSREL}\"" >> ${DESTDIR}/etc/os-release 567 @echo "SUPPORT_URL=\"http://chat.efnet.org:9090/?nick=dflynick&channels=%23dragonflybsd&Login=Login\"" >> ${DESTDIR}/etc/os-release 568 @echo "HOME_URL=\"https://www.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release 569 @echo "BUG_REPORT_URL=\"https://bugs.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release 570 @echo "MACHINE_ARCH=${MACHINE_ARCH}" >> ${DESTDIR}/etc/os-release 571 @echo "MACHINE=${MACHINE}" >> ${DESTDIR}/etc/os-release 572 @echo "DFLYVERSION=${DFLYVERSION}" >> ${DESTDIR}/etc/os-release 573 574installworld-force: 575 @echo "Doing a forced installworld. This will install to a temporary directory," 576 @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/" 577 @echo "and finally will issue a normal installworld." 578 @echo 579 @echo "Starting in 5 seconds. ^C to abort." 580 @echo 581 sleep 1 582 rm -rf /usr/obj/temp > /dev/null 2>&1 || chflags -R noschg /usr/obj/temp 583 rm -rf /usr/obj/temp 584 mkdir -p /usr/obj/temp/cpdup/bin 585 (cd ${.CURDIR}/bin/cpdup; \ 586 make clean && \ 587 make obj && \ 588 make clean && \ 589 make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE) 590 @echo "XXXXXXXXX Installing to temporary XXXXXXXXX" 591 @sleep 1 592 (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1) 593 @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX" 594 @sleep 1 595 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin 596 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin 597 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib 598 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin 599 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin 600 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib 601 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec 602 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec 603 @echo "XXXXXXXXX Doing final installworld XXXXXXXX" 604 sleep 5 605 (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE) 606 (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE) 607.if !defined(NO_INITRD) 608 (cd ${.CURDIR}; ${MAKE} initrd) 609.endif 610 611# reinstall 612# 613# If you have a build server, you can NFS mount the source and obj directories 614# and do a 'make reinstall' on the *client* to install new binaries from the 615# most recent server build. 616# 617reinstall: 618 @echo "--------------------------------------------------------------" 619 @echo ">>> Making hierarchy" 620 @echo "--------------------------------------------------------------" 621 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy 622 @echo 623 @echo "--------------------------------------------------------------" 624 @echo ">>> Installing everything" 625 @echo "--------------------------------------------------------------" 626 cd ${.CURDIR}; make -f Makefile.inc1 install 627 628# initrd 629# 630# Install the rescue tools and the initrd image built by 'buildworld'. 631# 632initrd: .PHONY 633 (cd ${.CURDIR}/initrd; ${IMAKEENV} make install) 634 635 636# buildkernel, nativekernel, quickkernel, realquickkernel, and installkernel 637# 638# Which kernels to build and/or install is specified by setting 639# KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed. 640# Only the existing (depending TARGET) config files are used 641# for building kernels and only the first of these is designated 642# as the one being installed. 643# 644# You can specify INSTALLSTRIPPED=1 if you wish the installed 645# kernel and modules to be stripped of its debug info (required 646# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 647# if you only want to strip the modules of their debug info. These 648# only apply if you have DEBUG=-g in your kernel config or make line. 649# 650# Note that we have to use TARGET instead of TARGET_ARCH when 651# we're in kernel-land. Since only TARGET_ARCH is (expected) to 652# be set to cross-build, we have to make sure TARGET is set 653# properly. 654 655.if !defined(KERNCONF) && defined(KERNEL) 656KERNCONF= ${KERNEL} 657KERNWARN= yes 658.else 659# XXX makeshift fix to build the right kernel for the (target) architecture 660# We should configure this in the platform files somehow 661.if ${TARGET_ARCH} == "x86_64" 662KERNCONF?= X86_64_GENERIC 663.endif 664.endif 665INSTKERNNAME?= kernel 666 667KRNLSRCDIR= ${.CURDIR}/sys 668KRNLCONFDIR= ${KRNLSRCDIR}/config 669KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 670KERNCONFDIR?= ${KRNLCONFDIR} 671 672BUILDKERNELS= 673INSTALLKERNEL= 674.for _kernel in ${KERNCONF} 675.if exists(${KERNCONFDIR}/${_kernel}) 676BUILDKERNELS+= ${_kernel} 677.if empty(INSTALLKERNEL) 678INSTALLKERNEL= ${_kernel} 679.endif 680.endif 681.endfor 682 683# kernel version numbers survive rm -rf 684# 685.for _kernel in ${BUILDKERNELS} 686.if exists(${KRNLOBJDIR}/${_kernel}/version) 687KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 688.endif 689.endfor 690 691# buildkernel 692# 693# Builds all kernels defined by BUILDKERNELS. 694# 695bk_tools: 696 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 697 echo "You must buildworld before buildkernel. If you wish"; \ 698 echo "to build a kernel using native tools, config it manually"; \ 699 echo "or use the nativekernel target if you are in a rush"; \ 700 /usr/bin/false; \ 701 fi 702 703maybe_bk_tools: 704.for _kernel in ${BUILDKERNELS} 705 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 706 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 707 echo "The kernel was build using buildworld tools which no" ; \ 708 echo "longer appear to exist, (real)quickkernel failed!" ; \ 709 /usr/bin/false; \ 710 fi; \ 711 fi 712.endfor 713 714bk_build_list: 715.if empty(BUILDKERNELS) 716 @echo ">>> ERROR: Missing kernel configuration file(s)." 717 @echo ">>> ${KERNCONF} not found in ${KERNCONFDIR}." 718 @false 719.endif 720 721bk_kernwarn: 722.if defined(KERNWARN) 723 @echo "--------------------------------------------------------------" 724 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 725 @echo "--------------------------------------------------------------" 726 @sleep 3 727.endif 728 @echo 729 730# The buildkernel target rebuilds the specified kernels from scratch 731# using the crossbuild tools generated by the last buildworld. It is 732# the safest (but also the most time consuming) way to build a new kernel. 733# 734buildkernel: bk_tools bk_build_list bk_kernwarn 735.for _kernel in ${BUILDKERNELS} 736 @echo "--------------------------------------------------------------" 737 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 738 @echo "--------------------------------------------------------------" 739 @echo "===> ${_kernel}" 740.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 741 rm -rf ${KRNLOBJDIR}/${_kernel} 742.else 743 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 744 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 745 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 746.endif 747 mkdir -p ${KRNLOBJDIR} 748.if !defined(NO_KERNELCONFIG) 749 cd ${KRNLCONFDIR}; \ 750 PATH=${STRICTTMPPATH} \ 751 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 752 ${KERNCONFDIR}/${_kernel} 753.endif 754.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 755 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 756.endif 757 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 758.if !defined(NO_KERNELDEPEND) 759 cd ${KRNLOBJDIR}/${_kernel}; \ 760 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend 761.endif 762 cd ${KRNLOBJDIR}/${_kernel}; \ 763 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all 764 @echo "--------------------------------------------------------------" 765 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 766 @echo "--------------------------------------------------------------" 767.endfor 768 769# The nativekernel target rebuilds the specified kernels from scratch 770# using the system's standard compiler rather than using the crossbuild 771# tools generated by the last buildworld. This is fairly safe if your 772# system is reasonable up-to-date. 773# 774nativekernel: bk_build_list bk_kernwarn 775.for _kernel in ${BUILDKERNELS} 776 @echo "--------------------------------------------------------------" 777 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 778 @echo "--------------------------------------------------------------" 779 @echo "===> ${_kernel}" 780.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 781 rm -rf ${KRNLOBJDIR}/${_kernel} 782.else 783 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 784 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 785 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 786.endif 787 mkdir -p ${KRNLOBJDIR} 788.if !defined(NO_KERNELCONFIG) 789 cd ${KRNLCONFDIR}; \ 790 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 791 ${KERNCONFDIR}/${_kernel} 792.endif 793.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 794 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 795.endif 796 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 797.if !defined(NO_KERNELDEPEND) 798 cd ${KRNLOBJDIR}/${_kernel}; \ 799 make KERNEL=${INSTKERNNAME} depend 800.endif 801 cd ${KRNLOBJDIR}/${_kernel}; \ 802 make KERNEL=${INSTKERNNAME} all 803 @echo "--------------------------------------------------------------" 804 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 805 @echo "--------------------------------------------------------------" 806.endfor 807 808# The (real)quickkernel target rebuilds the specified kernels as quickly 809# as possible. It will use the native tools or the buildworld cross tools 810# based on whether the kernel was originally generated via buildkernel or 811# nativekernel. Config is rerun but the object hierarchy is not rebuilt. 812# realquickkernel skips the depend step (analogous to realquickworld). 813# 814quickkernel realquickkernel: maybe_bk_tools bk_build_list bk_kernwarn 815.for _kernel in ${BUILDKERNELS} 816 @echo "--------------------------------------------------------------" 817 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 818 @echo "--------------------------------------------------------------" 819 @echo "===> ${_kernel}" 820.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 821.if !defined(NO_KERNELCONFIG) 822 cd ${KRNLCONFDIR}; \ 823 PATH=${STRICTTMPPATH} \ 824 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 825 ${KERNCONFDIR}/${_kernel} 826.endif 827.if !defined(NO_KERNELDEPEND) && !make(realquickkernel) 828 cd ${KRNLOBJDIR}/${_kernel}; \ 829 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend 830.endif 831 cd ${KRNLOBJDIR}/${_kernel}; \ 832 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all 833.else 834.if !defined(NO_KERNELCONFIG) 835 cd ${KRNLCONFDIR}; \ 836 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 837 ${KERNCONFDIR}/${_kernel} 838.endif 839.if !defined(NO_KERNELDEPEND) && !make(realquickkernel) 840 cd ${KRNLOBJDIR}/${_kernel}; \ 841 make KERNEL=${INSTKERNNAME} depend 842.endif 843 cd ${KRNLOBJDIR}/${_kernel}; \ 844 make KERNEL=${INSTKERNNAME} all 845.endif 846 @echo "--------------------------------------------------------------" 847 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 848 @echo "--------------------------------------------------------------" 849.endfor 850 851 852# installkernel 853# 854# Install the kernel defined by INSTALLKERNEL 855# 856installkernel reinstallkernel: 857 @echo "--------------------------------------------------------------" 858 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`" 859 @echo "--------------------------------------------------------------" 860.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run) 861 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 862 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 863.else 864 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 865 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 866.endif 867 @echo "--------------------------------------------------------------" 868 @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`" 869 @echo "--------------------------------------------------------------" 870 871 872# ------------------------------------------------------------------------ 873# 874# From here onwards are utility targets used by the 'make world' and 875# related targets. If your 'world' breaks, you may like to try to fix 876# the problem and manually run the following targets to attempt to 877# complete the build. Beware, this is *not* guaranteed to work, you 878# need to have a pretty good grip on the current state of the system 879# to attempt to manually finish it. If in doubt, 'make world' again. 880# 881 882# bootstrap-tools: Build all tools required to build all tools. Note that 883# order is important in a number of cases and also note that the bootstrap 884# and build tools stages have access to earlier binaries they themselves 885# had generated. 886# 887# [x]install: dependencies on various new install features 888# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 889# envs are not compatible with older objformat binaries. 890# 891 892# BSTRAPDIRS1 - must be built in strict order, no parallelism 893# 894# order is very important. yacc before m4 before flex. flex exec's m4, 895# m4's parser file needs the latest byacc (insanity!). 896# 897BSTRAPDIRS1= \ 898 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \ 899 bin/test bin/cat bin/ln bin/mv bin/expr bin/sh \ 900 bin/hostname bin/kill \ 901 usr.bin/yacc usr.bin/m4 usr.bin/localedef \ 902 usr.bin/uudecode usr.bin/xinstall \ 903 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \ 904 usr.bin/find usr.bin/flex 905 906# BSTRAPDIRS2 - may built in parallel 907# 908BSTRAPDIRS2= \ 909 usr.bin/sed usr.bin/uname usr.bin/touch \ 910 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 911 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 912 usr.bin/gencat usr.bin/chflags \ 913 usr.bin/uuencode usr.bin/cap_mkdb usr.bin/true usr.bin/false \ 914 usr.bin/cmp usr.bin/xargs usr.bin/env usr.bin/dirname \ 915 usr.bin/tail usr.bin/unifdef \ 916 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 917 usr.sbin/tzsetup usr.sbin/zic usr.sbin/pwd_mkdb \ 918 gnu/usr.bin/grep usr.bin/sort usr.bin/gzip \ 919 usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch 920 921bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2 922 touch ${BTOOLSDEST}/.bootstrap_done 923 924bootstrap-tools-before: 925 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 926 927bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/} 928 929bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/} 930 931.ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2 932 933.ORDER: ${BSTRAPDIRS1:S/^/bstrap-/} 934 935.for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2} 936bstrap-${_tool}! 937 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 938 cd ${.CURDIR}/${_tool}; \ 939 make DIRPRFX=${_tool}/ obj && \ 940 make DIRPRFX=${_tool}/ depend && \ 941 make DIRPRFX=${_tool}/ all && \ 942 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 943.endfor 944 945# build-tools: Build special purpose build tools. 946# 947# XXX we may be able to remove or consolidate this into bootstrap-tools 948# now that we have the native helper (.nx/.no) infrastructure. 949# 950# XXX we should separate this into new Makefile.inc2. 951# Just to prepare for reduction of ORDER: that slows down parallel crossworld. 952 953# Make sure Makefile.inc1 logic is intact. 954.if !defined(WORLD_ALTCOMPILER) 955.warning undefined WORLD_ALTCOMPILER 956.endif 957 958# gcc80 is now the default compiler. See sys.mk for WORLD_ALTCOMPILER default 959# and this file for WORLD_CCVER. 960# 961_gcc47_cross= gnu/usr.bin/cc47 962_gcc80_cross= gnu/usr.bin/cc80 963_gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc 964 965.if !defined(NO_ALTCOMPILER) 966. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 967_altcompiler_cross+= ${_gcc47_cross} 968. endif 969.endif 970 971_basecompiler_cross= ${_gcc80_cross} 972 973_custom_cross= libexec/customcc 974_binutils= gnu/usr.bin/${WORLD_BINUTILSVER} 975 976build-tools: build-tools-targets 977 touch ${BTOOLSDEST}/.build_done 978 979build-tools-targets: ${BTOOLSDIRS:S/^/btools-/} 980 981# 982# cross-tools: Build cross-building tools 983# 984 985CTOOLSDIRS= usr.bin/objformat 986 987CTOOLSDIRS+= ${_binutils} \ 988 ${_gcc_common_cross} \ 989 ${_altcompiler_cross} \ 990 ${_basecompiler_cross} ${_custom_cross} 991 992cross-tools: cross-tools-targets 993 touch ${CTOOLSDEST}/.cross_done 994 995cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/} 996 997.for _tool in ${CTOOLSDIRS} 998ctools-${_tool}! 999 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 1000 cd ${.CURDIR}/${_tool}; \ 1001 make DIRPRFX=${_tool}/ obj && \ 1002 make DIRPRFX=${_tool}/ depend && \ 1003 make DIRPRFX=${_tool}/ all && \ 1004 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 1005.endfor 1006 1007# 1008# hierarchy - ensure that all the needed directories are present 1009# 1010hierarchy: 1011 cd ${.CURDIR}/etc; make distrib-dirs 1012 1013# 1014# libraries - build all libraries, and install them under ${DESTDIR}. 1015# 1016# The list of libraries with dependents (${_prebuild_libs}) and their 1017# interdependencies (__L) are built automatically by the 1018# ${.CURDIR}/tools/make_libdeps.sh script. 1019# 1020# .makeenv does not work when bootstrapping from 4.x, so we must be sure 1021# to specify the correct CCVER or 'cc' will not exec the correct compiler. 1022# 1023libraries: 1024 cd ${.CURDIR}; \ 1025 HOST_CCVER=${HOST_CCVER} CCVER=gcc80 \ 1026 make -f Makefile.inc1 _startup_libs80 -DSYSBUILD -DLIBGCC_ONLY; 1027.if !defined(NO_ALTCOMPILER) 1028. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 1029 cd ${.CURDIR}; \ 1030 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \ 1031 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD -DLIBGCC_ONLY; 1032. endif 1033.endif 1034 cd ${.CURDIR}; \ 1035 make -f Makefile.inc1 _startup_libs -DSYSBUILD && \ 1036 make -f Makefile.inc1 _prebuild_libs -DSYSBUILD && \ 1037 make -f Makefile.inc1 _generic_libs -DSYSBUILD && \ 1038 touch ${WORLDDEST}/.libraries_done 1039 1040# These dependencies are not automatically generated: 1041# 1042# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all 1043# shared libraries for ELF. The target for _startup_libsXX is 1044# specifically built using gccXX. 1045# 1046_startup_libs47= gnu/usr.bin/cc47/cc_prep \ 1047 gnu/usr.bin/cc47/cc_tools \ 1048 gnu/lib/gcc47/csu \ 1049 gnu/lib/gcc47/libgcc \ 1050 gnu/lib/gcc47/libgcc_eh \ 1051 gnu/lib/gcc47/libgcc_pic 1052 1053_startup_libs80= gnu/usr.bin/cc80/cc_prep \ 1054 gnu/usr.bin/cc80/cc_tools \ 1055 gnu/lib/gcc80/csu \ 1056 gnu/lib/gcc80/libgcc \ 1057 gnu/lib/gcc80/libgcc_eh \ 1058 gnu/lib/gcc80/libgcc_pic 1059 1060.if !defined(NO_ALTCOMPILER) 1061. if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47}) 1062_startup_libs_alt+= _startup_libs47 1063. endif 1064.endif 1065 1066_startup_libs_base= _startup_libs80 1067 1068_startup_libs= lib/csu lib/libc lib/libc_rtld 1069lib/libc__L: lib/csu__L 1070 1071_prebuild_libs= lib/libbz2 lib/liblzma lib/libz 1072_prebuild_libs+= lib/libutil 1073 1074_prebuild_libs+= lib/libpcap 1075 1076_generic_libs= gnu/lib 1077 1078_prebuild_libs+= lib/libcrypt lib/libncurses/libncurses 1079 1080_generic_libs+= lib 1081 1082_prebuild_libs+= lib/librecrypto lib/libressl 1083lib/libressl__L: lib/librecrypto__L 1084 1085_prebuild_libs+= lib/libldns 1086lib/libldns__L: lib/librecrypto__L 1087 1088_prebuild_libs+= lib/libsbuf lib/libm \ 1089 lib/libpam/libpam lib/libypclnt lib/lib${THREAD_LIB} \ 1090 lib/libpthread lib/libprop 1091 1092_generic_libs+= usr.bin/flex/lib 1093 1094.for _alib in ${_startup_libs_alt} ${_startup_libs_base} 1095__startup_alibs+= ${${_alib}} 1096.endfor 1097 1098.for _lib in ${__startup_alibs} \ 1099 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 1100${_lib}__L: .PHONY 1101.if exists(${.CURDIR}/${_lib}) 1102 @${ECHODIR} "===> ${_lib}"; \ 1103 cd ${.CURDIR}/${_lib}; \ 1104 echo "STEP DEP ${_lib}" && \ 1105 make DIRPRFX=${_lib}/ depend && \ 1106 echo "STEP ALL ${_lib}" && \ 1107 make DIRPRFX=${_lib}/ all && \ 1108 echo "STEP INSTALL ${_lib}" && \ 1109 make DIRPRFX=${_lib}/ install && \ 1110 echo "STEP DONE ${_lib}"; 1111.else 1112.warning missing ${.CURDIR}/${_lib} directory. 1113.endif 1114.endfor 1115 1116_startup_libs: ${_startup_libs:S/$/__L/} 1117.for _alib in ${_startup_libs_alt} ${_startup_libs_base} 1118${_alib}: ${${_alib}:C/$/__L/} 1119.endfor 1120_prebuild_libs: ${_prebuild_libs:S/$/__L/} 1121_generic_libs: ${_generic_libs:S/$/__L/} 1122 1123# library targets must be ordered because there are inter-library 1124# races (e.g. generation of tconfig.h) 1125# 1126.for _alib in ${_startup_libs_base} ${_startup_libs_alt} 1127.ORDER: ${${_alib}:C/$/__L/} 1128.endfor 1129 1130# uncomment if there are missing dependencies 1131.if 0 1132.ORDER: ${_prebuild_libs:S/$/__L/} 1133# we can disable this one, no lib/* depend on libstdc++ 1134.ORDER: ${_generic_libs:S/$/__L/} 1135.endif 1136 1137.for __target in clean cleandepend cleandir obj depend includes 1138.for entry in ${SUBDIR} 1139${entry}.${__target}__D: .PHONY 1140 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 1141 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 1142 edir=${entry}.${MACHINE_ARCH}; \ 1143 cd ${.CURDIR}/$${edir}; \ 1144 else \ 1145 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 1146 edir=${entry}; \ 1147 cd ${.CURDIR}/$${edir}; \ 1148 fi; \ 1149 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 1150.endfor 1151par-${__target}: ${SUBDIR:C/$/.${__target}__D/} 1152.ORDER: ${SUBDIR:C/$/.${__target}__D/} 1153.endfor 1154.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 1155 1156# The wmake target is used by /usr/bin/wmake to run make in a 1157# world build environment. 1158# 1159wmake: 1160 @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD' 1161 1162wmakeenv: 1163 @echo '${WMAKEENV} /bin/sh' 1164 1165bmake: 1166 @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD' 1167 1168bmakeenv: 1169 @echo '${BMAKEENV} /bin/sh' 1170 1171tmake: 1172 @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD' 1173 1174tmakeenv: 1175 @echo '${TMAKEENV} /bin/sh' 1176 1177xmake: 1178 @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD' 1179 1180xmakeenv: 1181 @echo '${XMAKEENV} /bin/sh' 1182 1183backupworld: backup-clean 1184 @mkdir -p ${WORLD_BACKUP} 1185.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \ 1186 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \ 1187 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec)) 1188 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \ 1189 --options gzip:compression-level=1 \ 1190 sbin bin usr/sbin usr/bin usr/lib usr/libexec 1191.endif 1192 1193backupworld-auto: 1194.if !defined(NO_BACKUP) 1195 rm -f ${AUTO_BACKUP}/binaries.tar.gz 1196 @mkdir -p ${AUTO_BACKUP} 1197.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \ 1198 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \ 1199 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec)) 1200 /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \ 1201 --options gzip:compression-level=1 \ 1202 sbin bin usr/sbin usr/bin usr/lib usr/libexec 1203.endif 1204.endif 1205 1206backup-auto-clean: 1207 rm -f ${AUTO_BACKUP}/binaries.tar.gz 1208 1209backup-clean: 1210 rm -f ${WORLD_BACKUP}/binaries.tar.gz 1211 1212restoreworld: 1213.if !exists(${WORLD_BACKUP}/binaries.tar.gz) 1214 @echo "There does not seem to be a valid archive present." 1215.else 1216 @echo "Restoring system binaries from manual backup archive..." 1217 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \ 1218 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \ 1219 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec 1220 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ 1221.endif 1222 1223restoreworld-auto: 1224.if !exists(${AUTO_BACKUP}/binaries.tar.gz) 1225 @echo "There does not seem to be a valid archive present." 1226.else 1227 @echo "Restoring system binaries from auto-backup archive..." 1228 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \ 1229 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \ 1230 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec 1231 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ 1232.endif 1233 1234# Take advantage of bmake error response 1235# 1236MAKE_PRINT_VAR_ON_ERROR= \ 1237 .CURDIR \ 1238 .OBJDIR \ 1239 .TARGETS \ 1240 .ERROR_TARGET \ 1241 .MAKE.LEVEL \ 1242 .MAKE.MODE \ 1243 PATH \ 1244 LD_LIBRARY_PATH \ 1245 MACHINE_ARCH \ 1246 MACHINE \ 1247 MAKEFILE \ 1248 MAKESYSPATH \ 1249 MAKEOBJDIRPREFIX \ 1250 WORLD_ALTCOMPILER \ 1251 DESTDIR \ 1252 SHELL .SHELL 1253.if ${.MAKE.LEVEL} > 0 1254MAKE_PRINT_VAR_ON_ERROR+= .MAKE.MAKEFILES .PATH 1255.endif 1256 1257.include <bsd.subdir.mk> 1258