1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# 4# Build-time options are documented in make.conf(5). 5# 6# The intended user-driven targets are: 7# 8# buildworld - rebuild *everything*, including glue to help do upgrades 9# quickworld - skip the glue and do a depend+build on the meat 10# realquickworld - skip the glue and depend stages and just build the meat 11# crossworld - only build the glue (particularly the cross-build environment) 12# installworld- install everything built by "buildworld" 13# most - build user commands, no libraries or include files 14# installmost - install user commands, no libraries or include files 15# 16# Standard targets (not defined here) are documented in the makefiles in 17# /usr/share/mk. These include: 18# obj depend all install clean cleandepend cleanobj 19 20# Put initial settings here. 21SUBDIR= 22 23# We must do share/info early so that installation of info `dir' 24# entries works correctly. Do it first since it is less likely to 25# grow dependencies on include and lib than vice versa. 26.if exists(${.CURDIR}/share/info) 27SUBDIR+= share/info 28.endif 29 30# We must do include and lib early so that the perl *.ph generation 31# works correctly as it uses the header files installed by this. 32.if exists(${.CURDIR}/include) 33SUBDIR+= include 34.endif 35.if exists(${.CURDIR}/lib) 36SUBDIR+= lib 37.endif 38# This exists simply to ensure that the obj dir hierarchy is 39# intact for nrelease, allowing the nrelease Makefile's to 40# reference ${.OBJDIR}. 41# 42.if exists(${.CURDIR}/nrelease) 43SUBDIR+= nrelease 44.endif 45 46.if exists(${.CURDIR}/bin) 47SUBDIR+= bin 48.endif 49.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 50SUBDIR+= games 51.endif 52.if exists(${.CURDIR}/gnu) 53SUBDIR+= gnu 54.endif 55.if exists(${.CURDIR}/libexec) 56SUBDIR+= libexec 57.endif 58.if exists(${.CURDIR}/sbin) 59SUBDIR+= sbin 60.endif 61.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT) 62SUBDIR+= secure 63.endif 64.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 65SUBDIR+= share 66.endif 67.if exists(${.CURDIR}/sys) 68SUBDIR+= sys 69.endif 70.if exists(${.CURDIR}/usr.bin) 71SUBDIR+= usr.bin 72.endif 73.if exists(${.CURDIR}/usr.sbin) 74SUBDIR+= usr.sbin 75.endif 76 77.if exists(${.CURDIR}/etc) 78SUBDIR+= etc 79.endif 80 81# These are last, since it is nice to at least get the base system 82# rebuilt before you do them. 83.if defined(LOCAL_DIRS) 84.for _DIR in ${LOCAL_DIRS} 85.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 86SUBDIR+= ${_DIR} 87.endif 88.endfor 89.endif 90 91.if defined(SUBDIR_OVERRIDE) 92SUBDIR= ${SUBDIR_OVERRIDE} 93.endif 94 95.if defined(NOCLEANDIR) 96CLEANDIR= clean cleandepend 97.else 98CLEANDIR= cleandir 99.endif 100 101.if defined(NO_CLEAN) 102NOCLEAN= # defined 103.endif 104 105# Object directory base in primary make. Note that when we rerun make 106# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 107# subdirectory because the rest of the build system needs it that way. 108# The original object directory base is saved in OBJTREE. 109# 110MAKEOBJDIRPREFIX?= /usr/obj 111OBJTREE?= ${MAKEOBJDIRPREFIX} 112 113# Used for stage installs and pathing 114# 115DESTDIRBASE?= ${OBJTREE}${.CURDIR} 116 117# Remove DESTDIR from MAKEFLAGS. It is present in the environment 118# anyhow, and we need to be able to override it for stage installs 119.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*} 120 121# This sets the compiler we use to build the world/kernel with 122WORLD_CCVER?= gcc44 123WORLD_BINUTILSVER?= binutils222 124 125# temporary until everybody has converted to x86_64 126.if ${MACHINE_ARCH} == "amd64" 127MACHINE_ARCH= x86_64 128.makeenv MACHINE_ARCH 129.endif 130 131TARGET_ARCH?= ${MACHINE_ARCH} 132.if ${TARGET_ARCH} == ${MACHINE_ARCH} 133TARGET?= ${MACHINE} 134.else 135TARGET?= ${TARGET_ARCH} 136.endif 137.if make(buildworld) 138BUILD_ARCH!= sysctl -n hw.machine_arch 139 140# temporary until everybody has converted to x86_64 141.if ${BUILD_ARCH} == "amd64" 142BUILD_ARCH= x86_64 143.endif 144 145.if ${MACHINE_ARCH} != ${BUILD_ARCH} 146.error To cross-build, set TARGET_ARCH. 147.endif 148.endif 149 150# Backwards compatibility with older make's or older sys.mk's. make 151# is expected to define MACHINE_PLATFORM. 152# 153.if !defined(MACHINE_PLATFORM) 154MACHINE_PLATFORM= pc32 155.endif 156 157# XXX this is ugly and we need to come up with a nicer solution 158.if !defined(TARGET_PLATFORM) 159.if ${TARGET_ARCH} == "i386" 160TARGET_PLATFORM= pc32 161.elif ${TARGET_ARCH} == "x86_64" 162TARGET_PLATFORM= pc64 163.else 164.error Unknown target architecture. 165.endif 166.endif 167 168THREAD_LIB?= thread_xu 169.if ${THREAD_LIB} == "c_r" 170.if defined(NO_LIBC_R) 171.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined 172.endif 173.endif 174 175# BTOOLS (Natively built) All non-cross-development tools that the 176# main build needs. This includes things like 'mkdir' and 'rm'. 177# We will not use the native system's exec path once we start 178# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 179# 180# CTOOLS (Natively built) Cross development tools which are specific 181# to the target architecture. 182# 183# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 184# CTOOLS. 185# 186# MACHINE_PLATFORM Platform Architecture we are building on 187# MACHINE Machine Architecture (usually the same as MACHINE_ARCH) 188# MACHINE_ARCH Cpu Architecture we are building on 189# 190# TARGET_PLATFORM Platform Architecture we are building for 191# TARGET Machine Architecture we are building for 192# TARGET_ARCH Cpu Architecture we are building for 193# 194BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 195CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 196WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 197 198# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 199# cross-tools stages to augment the existing command path to access newer 200# versions of certain utilities such as 'patch' that the cross-tools stage 201# might expect. 202# 203BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 204 205# The strict temporary command path contains all binaries required 206# by the buildworld system after the cross-tools stage. 207# 208STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/pkg/bin 209 210TMPDIR?= /tmp 211TMPPID!= echo $$$$ 212 213# 214# Building a world goes through the following stages 215# 216# 1. bootstrap-tool stage [BMAKE] 217# This stage is responsible for creating programs that 218# are needed for backward compatibility reasons. They 219# are not built as cross-tools. 220# 2. build-tool stage [TMAKE] 221# This stage is responsible for creating the object 222# tree and building any tools that are needed during 223# the build process. 224# 3. cross-tool stage [XMAKE] 225# This stage is responsible for creating any tools that 226# are needed for cross-builds. A cross-compiler is one 227# of them. 228# 4. world stage [WMAKE] 229# This stage actually builds the world. 230# 5. install stage (optional) [IMAKE] 231# This stage installs a previously built world. 232# 233 234# bootstrap-tool stage 235# 236BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 237 OBJTREE=${OBJTREE} \ 238 DESTDIR=${BTOOLSDEST} \ 239 PATH=${BTOOLSPATH}:${PATH} \ 240 INSTALL="sh ${.CURDIR}/tools/install.sh" 241 242BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 243 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 244 -DNO_WERROR -DNO_NLS 245 246# build-tool stage 247# 248TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 249 OBJTREE=${OBJTREE} \ 250 DESTDIR= \ 251 PATH=${BTOOLSPATH}:${PATH} \ 252 INSTALL="sh ${.CURDIR}/tools/install.sh" 253 254TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 255 -DNO_FORTRAN -DNOSHARED 256 257# cross-tool stage 258# 259# note: TOOLS_PREFIX points to the obj root holding the cross 260# compiler binaries, while USRDATA_PREFIX points to the obj root 261# holding the target environment (and also determines where cross-built 262# libraries, crt*.o, and include files are installed). 263# 264XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 265 OBJTREE=${OBJTREE} \ 266 DESTDIR=${CTOOLSDEST} \ 267 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 268 TOOLS_PREFIX=${CTOOLSDEST} \ 269 USRDATA_PREFIX=${WORLDDEST} \ 270 PATH=${BTOOLSPATH}:${PATH} 271 272XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \ 273 -DBOOTSTRAPPING -DNOSHARED 274 275# world stage, note the strict path and note that TOOLS_PREFIX is left 276# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 277# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 278# for both binary and library paths, even though it is being compiled to 279# WORLDDEST. None of the programs in the world stage are ever actually 280# executed during the buildworld/installworld. 281# 282CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 283 OBJTREE=${OBJTREE} \ 284 MACHINE_ARCH=${TARGET_ARCH} \ 285 MACHINE=${TARGET} \ 286 MACHINE_PLATFORM=${TARGET_PLATFORM} \ 287 OBJFORMAT_PATH=${CTOOLSDEST} \ 288 HOST_CCVER=${HOST_CCVER} \ 289 CCVER=${WORLD_CCVER} \ 290 BINUTILSVER=${WORLD_BINUTILSVER} 291 292WMAKEENV= ${CROSSENV} \ 293 DESTDIR=${WORLDDEST} \ 294 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 295 PATH=${STRICTTMPPATH} 296 297WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 298 299# install stage 300# 301IMAKEENV= ${CROSSENV} \ 302 PATH=${STRICTTMPPATH} 303IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 304 305# kernel stage 306# 307KMAKEENV= ${WMAKEENV} 308 309# buildworld 310# 311# Attempt to rebuild the entire system, with reasonable chance of 312# success, regardless of how old your existing system is. 313# 314_worldtmp: _cleantmp _mtreetmp 315.ORDER: _cleantmp _mtreetmp 316 317_cleantmp: 318 @echo 319 @echo "--------------------------------------------------------------" 320 @echo ">>> Rebuilding the temporary build tree" 321 @echo "--------------------------------------------------------------" 322.if !defined(NOCLEAN) 323 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 324.else 325 # XXX - These two can depend on any header file. 326 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 327 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 328.endif 329 330_mtreetmp: 331 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 332.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 333 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 334 -p ${_dir}/ > /dev/null 335 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 336 -p ${_dir}/usr > /dev/null 337.endfor 338 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 339 -p ${WORLDDEST}/usr/include > /dev/null 340 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 341 342_bootstrap-tools: 343 @echo 344 @echo "--------------------------------------------------------------" 345 @echo ">>> stage 1: bootstrap tools" 346 @echo "--------------------------------------------------------------" 347 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 348_cleanobj: 349 @echo 350 @echo "--------------------------------------------------------------" 351 @echo ">>> stage 2a: cleaning up the object tree" 352 @echo "--------------------------------------------------------------" 353 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 354_obj: 355 @echo 356 @echo "--------------------------------------------------------------" 357 @echo ">>> stage 2b: rebuilding the object tree" 358 @echo "--------------------------------------------------------------" 359 cd ${.CURDIR}; ${WMAKE} par-obj 360_build-tools: 361 @echo 362 @echo "--------------------------------------------------------------" 363 @echo ">>> stage 2c: build tools" 364 @echo "--------------------------------------------------------------" 365 cd ${.CURDIR}; ${TMAKE} build-tools 366_cross-tools: 367 @echo 368 @echo "--------------------------------------------------------------" 369 @echo ">>> stage 3: cross tools" 370 @echo "--------------------------------------------------------------" 371 cd ${.CURDIR}; ${XMAKE} cross-tools 372_includes: 373 @echo 374 @echo "--------------------------------------------------------------" 375 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 376 @echo "--------------------------------------------------------------" 377 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 378_libraries: 379 @echo 380 @echo "--------------------------------------------------------------" 381 @echo ">>> stage 4b: building libraries" 382 @echo "--------------------------------------------------------------" 383 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 384_depend: 385 @echo 386 @echo "--------------------------------------------------------------" 387 @echo ">>> stage 4c: make dependencies" 388 @echo "--------------------------------------------------------------" 389 cd ${.CURDIR}; ${WMAKE} par-depend 390everything: 391 @echo 392 @echo "--------------------------------------------------------------" 393 @echo ">>> stage 4d: building everything.." 394 @echo "--------------------------------------------------------------" 395 cd ${.CURDIR}; ${WMAKE} all 396 397# note: buildworld no longer depends on _cleanobj because we rm -rf the 398# entire object tree and built the bootstrap tools in a different location. 399# 400# buildworld - build everything from scratch 401# quickworld - skip the bootstrap, build, and cross-build steps 402# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 403# 404# note: we include _obj in realquickworld to prevent accidental creation 405# of files in /usr/src. 406 407WMAKE_TGTS= 408.if !defined(SUBDIR_OVERRIDE) 409WMAKE_TGTS+= _worldtmp _bootstrap-tools 410.endif 411WMAKE_TGTS+= _obj _build-tools 412.if !defined(SUBDIR_OVERRIDE) 413WMAKE_TGTS+= _cross-tools 414.endif 415WMAKE_TGTS+= _includes _libraries _depend everything 416 417buildworld: ${WMAKE_TGTS} 418 419quickworld: _mtreetmp _obj _includes _libraries _depend everything 420 421realquickworld: _mtreetmp _obj _includes _libraries everything 422 423crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 424 425.ORDER: ${WMAKE_TGTS} 426.ORDER: _obj _includes 427.ORDER: _mtreetmp _obj 428 429# 430# installcheck 431# 432# Checks to be sure system is ready for installworld 433# 434installcheck: 435.if !defined(NO_SENDMAIL) 436 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 437 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 438.endif 439 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 440 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1) 441 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 442.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 443 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac 444.endif 445# 446# installworld 447# 448# Installs everything compiled by a 'buildworld'. 449# 450installworld: installcheck 451 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 452 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/ 453 454# 455# reinstall 456# 457# If you have a build server, you can NFS mount the source and obj directories 458# and do a 'make reinstall' on the *client* to install new binaries from the 459# most recent server build. 460# 461reinstall: 462 @echo "--------------------------------------------------------------" 463 @echo ">>> Making hierarchy" 464 @echo "--------------------------------------------------------------" 465 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 466 @echo 467 @echo "--------------------------------------------------------------" 468 @echo ">>> Installing everything.." 469 @echo "--------------------------------------------------------------" 470 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 471 472# 473# buildkernel, nativekernel, quickkernel, and installkernel 474# 475# Which kernels to build and/or install is specified by setting 476# KERNCONF. If not defined a GENERIC kernel is built/installed. 477# Only the existing (depending TARGET) config files are used 478# for building kernels and only the first of these is designated 479# as the one being installed. 480# 481# You can specify INSTALLSTRIPPED=1 if you wish the installed 482# kernel and modules to be stripped of its debug info (required 483# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 484# if you only want to strip the modules of their debug info. These 485# only apply if you have DEBUG=-g in your kernel config or make line. 486# 487# Note that we have to use TARGET instead of TARGET_ARCH when 488# we're in kernel-land. Since only TARGET_ARCH is (expected) to 489# be set to cross-build, we have to make sure TARGET is set 490# properly. 491 492.if !defined(KERNCONF) && defined(KERNEL) 493KERNCONF= ${KERNEL} 494KERNWARN= yes 495.else 496# XXX makeshift fix to build the right kernel for the (target) architecture 497# We should configure this in the platform files somehow 498.if ${TARGET_ARCH} == "i386" 499KERNCONF?= GENERIC 500.else 501KERNCONF?= X86_64_GENERIC 502.endif 503.endif 504INSTKERNNAME?= kernel 505 506KRNLSRCDIR= ${.CURDIR}/sys 507KRNLCONFDIR= ${KRNLSRCDIR}/config 508KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 509KERNCONFDIR?= ${KRNLCONFDIR} 510 511BUILDKERNELS= 512INSTALLKERNEL= 513.for _kernel in ${KERNCONF} 514.if exists(${KERNCONFDIR}/${_kernel}) 515BUILDKERNELS+= ${_kernel} 516.if empty(INSTALLKERNEL) 517INSTALLKERNEL= ${_kernel} 518.endif 519.endif 520.endfor 521 522# kernel version numbers survive rm -rf 523# 524.for _kernel in ${BUILDKERNELS} 525.if exists(${KRNLOBJDIR}/${_kernel}/version) 526KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 527.endif 528.endfor 529 530# 531# buildkernel 532# 533# Builds all kernels defined by BUILDKERNELS. 534# 535bk_tools: 536 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 537 echo "You must buildworld before buildkernel. If you wish"; \ 538 echo "to build a kernel using native tools, config it manually"; \ 539 echo "or use the nativekernel target if you are in a rush"; \ 540 exit 1; \ 541 fi 542 543maybe_bk_tools: 544.for _kernel in ${BUILDKERNELS} 545 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 546 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 547 echo "The kernel was build using buildworld tools which no" ; \ 548 echo "longer appear to exist, quickkernel failed!" ; \ 549 exit 1; \ 550 fi; \ 551 fi 552.endfor 553 554bk_build_list: 555.if empty(BUILDKERNELS) 556 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})." 557 @echo ">>> Did you move your kernel configs from i386/conf to config/?" 558 @false 559.endif 560 561bk_kernwarn: 562.if defined(KERNWARN) 563 @echo "--------------------------------------------------------------" 564 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 565 @echo "--------------------------------------------------------------" 566 @sleep 3 567.endif 568 @echo 569 570# The buildkernel target rebuilds the specified kernels from scratch 571# using the crossbuild tools generated by the last buildworld. It is 572# the safest (but also the most time consuming) way to build a new kernel. 573# 574buildkernel: bk_tools bk_build_list bk_kernwarn 575.for _kernel in ${BUILDKERNELS} 576 @echo "--------------------------------------------------------------" 577 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 578 @echo "--------------------------------------------------------------" 579 @echo "===> ${_kernel}" 580.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 581 rm -rf ${KRNLOBJDIR}/${_kernel} 582.else 583 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 584 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 585 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 586.endif 587 mkdir -p ${KRNLOBJDIR} 588.if !defined(NO_KERNELCONFIG) 589 cd ${KRNLCONFDIR}; \ 590 PATH=${STRICTTMPPATH} \ 591 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 592 ${KERNCONFDIR}/${_kernel} 593.endif 594.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 595 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 596.endif 597 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 598.if !defined(NO_KERNELDEPEND) 599 cd ${KRNLOBJDIR}/${_kernel}; \ 600 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend 601.endif 602 cd ${KRNLOBJDIR}/${_kernel}; \ 603 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 604 @echo "--------------------------------------------------------------" 605 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 606 @echo "--------------------------------------------------------------" 607.endfor 608 609# The nativekernel target rebuilds the specified kernels from scratch 610# using the system's standard compiler rather than using the crossbuild 611# tools generated by the last buildworld. This is fairly safe if your 612# system is reasonable up-to-date. 613# 614nativekernel: bk_build_list bk_kernwarn 615.for _kernel in ${BUILDKERNELS} 616 @echo "--------------------------------------------------------------" 617 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 618 @echo "--------------------------------------------------------------" 619 @echo "===> ${_kernel}" 620.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 621 rm -rf ${KRNLOBJDIR}/${_kernel} 622.else 623 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 624 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 625 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 626.endif 627 mkdir -p ${KRNLOBJDIR} 628.if !defined(NO_KERNELCONFIG) 629 cd ${KRNLCONFDIR}; \ 630 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 631 ${KERNCONFDIR}/${_kernel} 632.endif 633.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 634 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 635.endif 636 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 637 cd ${KRNLOBJDIR}/${_kernel}; \ 638 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \ 639 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile 640.if !defined(NO_KERNELDEPEND) 641 cd ${KRNLOBJDIR}/${_kernel}; \ 642 ${MAKE} KERNEL=${INSTKERNNAME} depend 643.endif 644 cd ${KRNLOBJDIR}/${_kernel}; \ 645 ${MAKE} KERNEL=${INSTKERNNAME} all 646 @echo "--------------------------------------------------------------" 647 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 648 @echo "--------------------------------------------------------------" 649.endfor 650 651# The quickkernel target rebuilds the specified kernels as quickly 652# as possible. It will use the native tools or the buildworld cross tools 653# based on whether the kernel was originally generated via buildkernel or 654# nativekernel. Config is rerun but the object hierarchy is not rebuilt, 655# nor is the make depend step run. 656# 657quickkernel: maybe_bk_tools bk_build_list bk_kernwarn 658.for _kernel in ${BUILDKERNELS} 659 @echo "--------------------------------------------------------------" 660 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 661 @echo "--------------------------------------------------------------" 662 @echo "===> ${_kernel}" 663.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 664.if !defined(NO_KERNELCONFIG) 665 cd ${KRNLCONFDIR}; \ 666 PATH=${STRICTTMPPATH} \ 667 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 668 ${KERNCONFDIR}/${_kernel} 669.endif 670 cd ${KRNLOBJDIR}/${_kernel}; \ 671 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 672.else 673.if !defined(NO_KERNELCONFIG) 674 cd ${KRNLCONFDIR}; \ 675 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 676 ${KERNCONFDIR}/${_kernel} 677.endif 678 cd ${KRNLOBJDIR}/${_kernel}; \ 679 ${MAKE} KERNEL=${INSTKERNNAME} all 680.endif 681 @echo "--------------------------------------------------------------" 682 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 683 @echo "--------------------------------------------------------------" 684.endfor 685 686 687# installkernel 688# 689# Install the kernel defined by INSTALLKERNEL 690# 691installkernel reinstallkernel: 692 @echo "--------------------------------------------------------------" 693 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`" 694 @echo "--------------------------------------------------------------" 695.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run) 696 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 697 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 698.else 699 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 700 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 701.endif 702 703# 704# most 705# 706# Build most of the user binaries on the existing system libs and includes. 707# 708most: 709 @echo "--------------------------------------------------------------" 710 @echo ">>> Building programs only" 711 @echo "--------------------------------------------------------------" 712.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 713 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 714.endfor 715 716# 717# installmost 718# 719# Install the binaries built by the 'most' target. This does not include 720# libraries or include files. 721# 722installmost: 723 @echo "--------------------------------------------------------------" 724 @echo ">>> Installing programs only" 725 @echo "--------------------------------------------------------------" 726.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 727 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 728.endfor 729 730# 731# ------------------------------------------------------------------------ 732# 733# From here onwards are utility targets used by the 'make world' and 734# related targets. If your 'world' breaks, you may like to try to fix 735# the problem and manually run the following targets to attempt to 736# complete the build. Beware, this is *not* guaranteed to work, you 737# need to have a pretty good grip on the current state of the system 738# to attempt to manually finish it. If in doubt, 'make world' again. 739# 740 741# bootstrap-tools: Build all tools required to build all tools. Note that 742# order is important in a number of cases and also note that the bootstrap 743# and build tools stages have access to earlier binaries they themselves 744# had generated. 745# 746# patch: older patch's do not have -i. This program must be built 747# first so other bootstrap tools that need to apply patches 748# can use it. 749# [x]install: dependancies on various new install features 750# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 751# envs are not compatible with older objformat binaries. 752# 753.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 754_strfile= games/fortune/strfile 755.endif 756 757BSTRAPDIRS= ${_strfile} \ 758 usr.bin/patch \ 759 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \ 760 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \ 761 bin/hostname bin/kill \ 762 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \ 763 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \ 764 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \ 765 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 766 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 767 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \ 768 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \ 769 usr.bin/cap_mkdb usr.bin/true usr.bin/false \ 770 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \ 771 usr.bin/tail usr.bin/unifdef \ 772 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 773 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \ 774 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \ 775 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb 776 777bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets 778 touch ${BTOOLSDEST}/.bootstrap_done 779 780bootstrap-tools-before: 781 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 782 783bootstrap-tools-targets: ${BSTRAPDIRS:S/^/bstrap-/} 784 785.ORDER: bootstrap-tools-before bootstrap-tools-targets 786 787.for _tool in ${BSTRAPDIRS} 788bstrap-${_tool}! 789 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 790 cd ${.CURDIR}/${_tool}; \ 791 ${MAKE} DIRPRFX=${_tool}/ obj; \ 792 ${MAKE} DIRPRFX=${_tool}/ depend; \ 793 ${MAKE} DIRPRFX=${_tool}/ all; \ 794 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 795.endfor 796 797# build-tools: Build special purpose build tools. 798# 799# XXX we may be able to remove or consolidate this into bootstrap-tools 800# now that we have the native helper (.nx/.no) infrastructure. 801# 802.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 803_share= share/syscons/scrnmaps 804.endif 805 806.if !defined(NO_GCC41) 807_gcc41_cross= gnu/usr.bin/cc41 808_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools 809.endif 810_gcc44_cross= gnu/usr.bin/cc44 811_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools 812_custom_cross= libexec/customcc 813_binutils= gnu/usr.bin/${WORLD_BINUTILSVER} 814 815BTOOLSDIRS= ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share} 816 817build-tools: build-tools-targets 818 touch ${BTOOLSDEST}/.build_done 819 820build-tools-targets: ${BTOOLSDIRS:S/^/btools-/} 821 822.ORDER: ${_gcc41_tools:S/^/btools-/} 823.ORDER: ${_gcc44_tools:S/^/btools-/} 824 825.for _tool in ${BTOOLSDIRS} 826btools-${_tool}! 827 ${ECHODIR} "===> ${_tool} (build-tools)"; \ 828 cd ${.CURDIR}/${_tool}; \ 829 ${MAKE} DIRPRFX=${_tool}/ obj; \ 830 ${MAKE} DIRPRFX=${_tool}/ depend; \ 831 ${MAKE} DIRPRFX=${_tool}/ all; \ 832 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 833.endfor 834 835# 836# cross-tools: Build cross-building tools 837# 838.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 839_btxld= usr.sbin/btxld 840.endif 841 842CTOOLSDIRS= ${_btxld} ${_binutils} usr.bin/objformat \ 843 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross} 844 845cross-tools: cross-tools-targets 846 touch ${CTOOLSDEST}/.cross_done 847 848cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/} 849 850.for _tool in ${CTOOLSDIRS} 851ctools-${_tool}! 852 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 853 cd ${.CURDIR}/${_tool}; \ 854 ${MAKE} DIRPRFX=${_tool}/ obj; \ 855 ${MAKE} DIRPRFX=${_tool}/ depend; \ 856 ${MAKE} DIRPRFX=${_tool}/ all; \ 857 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 858.endfor 859 860# 861# hierarchy - ensure that all the needed directories are present 862# 863hierarchy: 864 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 865 866# 867# libraries - build all libraries, and install them under ${DESTDIR}. 868# 869# The list of libraries with dependents (${_prebuild_libs}) and their 870# interdependencies (__L) are built automatically by the 871# ${.CURDIR}/tools/make_libdeps.sh script. 872# 873# .makeenv does not work when bootstrapping from 4.x, so we must be sure 874# to specify the correct CCVER or 'cc' will not exec the correct compiler. 875# 876libraries: 877.if !defined(NO_GCC41) 878 cd ${.CURDIR}; \ 879 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \ 880 ${MAKE} -f Makefile.inc1 _startup_libs41; 881.endif 882 cd ${.CURDIR}; \ 883 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \ 884 ${MAKE} -f Makefile.inc1 _startup_libs44; 885 cd ${.CURDIR}; \ 886 ${MAKE} -f Makefile.inc1 _startup_libs; \ 887 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 888 ${MAKE} -f Makefile.inc1 _generic_libs; 889 touch ${WORLDDEST}/.libraries_done 890 891# These dependencies are not automatically generated: 892# 893# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all 894# shared libraries for ELF. The target for _startup_libsXX is 895# specifically built using gccXX. 896# 897_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc 898_startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc 899_startup_libs= lib/csu lib/libc lib/libc_rtld 900 901_prebuild_libs= lib/libbz2 lib/liblzma lib/libz 902_prebuild_libs+= lib/libutil 903 904_generic_libs= gnu/lib 905 906_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \ 907 lib/libncurses/libncurses lib/libopie lib/libradius \ 908 lib/libsbuf lib/libtacplus lib/libm \ 909 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \ 910 lib/libpthread lib/libprop lib/libdevattr 911 912lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 913 914_generic_libs+= lib 915 916.if !defined(NO_CRYPT) 917.if !defined(NO_OPENSSL) 918_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 919.if !defined(NO_OPENSSH) 920_prebuild_libs+= secure/lib/libssh 921secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 922.endif 923.endif 924_generic_libs+= secure/lib 925.endif 926 927_generic_libs+= usr.bin/lex/lib 928 929.for _lib in ${_startup_libs41} ${_startup_libs44} \ 930 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 931${_lib}__L: .PHONY 932.if exists(${.CURDIR}/${_lib}) 933 ${ECHODIR} "===> ${_lib}"; \ 934 cd ${.CURDIR}/${_lib}; \ 935 ${MAKE} DIRPRFX=${_lib}/ depend; \ 936 ${MAKE} DIRPRFX=${_lib}/ all; \ 937 ${MAKE} DIRPRFX=${_lib}/ install 938.endif 939.endfor 940 941_startup_libs: ${_startup_libs:S/$/__L/} 942_startup_libs41: ${_startup_libs41:S/$/__L/} 943_startup_libs44: ${_startup_libs44:S/$/__L/} 944_prebuild_libs: ${_prebuild_libs:S/$/__L/} 945_generic_libs: ${_generic_libs:S/$/__L/} 946 947# library targets must be ordered because there are inter-library 948# races (e.g. generation of tconfig.h) 949# 950.ORDER: ${_startup_libs41:S/$/__L/} 951.ORDER: ${_startup_libs44:S/$/__L/} 952.ORDER: ${_startup_libs:S/$/__L/} 953.ORDER: ${_prebuild_libs:S/$/__L/} 954.ORDER: ${_generic_libs:S/$/__L/} 955 956.for __target in clean cleandepend cleandir obj depend includes 957.for entry in ${SUBDIR} 958${entry}.${__target}__D: .PHONY 959 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 960 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 961 edir=${entry}.${MACHINE_ARCH}; \ 962 cd ${.CURDIR}/$${edir}; \ 963 else \ 964 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 965 edir=${entry}; \ 966 cd ${.CURDIR}/$${edir}; \ 967 fi; \ 968 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 969.endfor 970par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 971.ORDER: ${SUBDIR:S/$/.${__target}__D/} 972.endfor 973.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 974 975# The wmake target is used by /usr/bin/wmake to run make in a 976# world build environment. 977# 978wmake: 979 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}' 980 981wmakeenv: 982 @echo '${WMAKEENV} /bin/sh' 983 984bmake: 985 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}' 986 987bmakeenv: 988 @echo '${BMAKEENV} /bin/sh' 989 990tmake: 991 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}' 992 993tmakeenv: 994 @echo '${TMAKEENV} /bin/sh' 995 996xmake: 997 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}' 998 999xmakeenv: 1000 @echo '${XMAKEENV} /bin/sh' 1001 1002.include <bsd.subdir.mk> 1003 1004