1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# $DragonFly: src/Makefile.inc1,v 1.76 2005/08/02 13:07:50 joerg Exp $ 4# 5# Make command line options: 6# -DMAKE_KERBEROS5 to build Kerberos5 7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 8# -DNOCLEAN do not clean at all 9# -DNOCRYPT will prevent building of crypt versions 10# -DNOMAN do not build the manual pages 11# -DNOPROFILE do not build profiled libraries 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24# 25# The intended user-driven targets are: 26# 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# quickworld - skip the glue and do a depend+build on the meat 29# realquickworld - skip the glue and depend stages and just build the meat 30# crossworld - only build the glue (particularly the cross-build environment) 31# installworld- install everything built by "buildworld" 32# update - convenient way to update your source tree (eg: sup/cvs) 33# most - build user commands, no libraries or include files 34# installmost - install user commands, no libraries or include files 35# 36# Standard targets (not defined here) are documented in the makefiles in 37# /usr/share/mk. These include: 38# obj depend all install clean cleandepend cleanobj 39 40# Put initial settings here. 41SUBDIR= 42 43# We must do share/info early so that installation of info `dir' 44# entries works correctly. Do it first since it is less likely to 45# grow dependencies on include and lib than vice versa. 46.if exists(${.CURDIR}/share/info) 47SUBDIR+= share/info 48.endif 49 50# We must do include and lib early so that the perl *.ph generation 51# works correctly as it uses the header files installed by this. 52.if exists(${.CURDIR}/include) 53SUBDIR+= include 54.endif 55.if exists(${.CURDIR}/lib) 56SUBDIR+= lib 57.endif 58# This exists simply to ensure that the obj dir hierarchy is 59# intact for nrelease, allowing the nrelease Makefile's to 60# reference ${.OBJDIR}. 61# 62.if exists(${.CURDIR}/nrelease) 63SUBDIR+= nrelease 64.endif 65 66.if exists(${.CURDIR}/bin) 67SUBDIR+= bin 68.endif 69.if exists(${.CURDIR}/games) && !defined(NOGAMES) 70SUBDIR+= games 71.endif 72.if exists(${.CURDIR}/gnu) 73SUBDIR+= gnu 74.endif 75.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 76 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5) 77SUBDIR+= kerberos5 78.endif 79.if exists(${.CURDIR}/libexec) 80SUBDIR+= libexec 81.endif 82.if exists(${.CURDIR}/sbin) 83SUBDIR+= sbin 84.endif 85.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 86SUBDIR+= secure 87.endif 88.if exists(${.CURDIR}/share) && !defined(NOSHARE) 89SUBDIR+= share 90.endif 91.if exists(${.CURDIR}/sys) 92SUBDIR+= sys 93.endif 94.if exists(${.CURDIR}/usr.bin) 95SUBDIR+= usr.bin 96.endif 97.if exists(${.CURDIR}/usr.sbin) 98SUBDIR+= usr.sbin 99.endif 100 101# etc must be last for "distribute" to work 102.if exists(${.CURDIR}/etc) 103SUBDIR+= etc 104.endif 105 106# These are last, since it is nice to at least get the base system 107# rebuilt before you do them. 108.if defined(LOCAL_DIRS) 109.for _DIR in ${LOCAL_DIRS} 110.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 111SUBDIR+= ${_DIR} 112.endif 113.endfor 114.endif 115 116.if defined(SUBDIR_OVERRIDE) 117SUBDIR= ${SUBDIR_OVERRIDE} 118.endif 119 120.if defined(NOCLEANDIR) 121CLEANDIR= clean cleandepend 122.else 123CLEANDIR= cleandir 124.endif 125 126SUP?= /usr/local/bin/cvsup 127SUPFLAGS?= -g -L 2 -P - 128.if defined(SUPHOST) 129SUPFLAGS+= -h ${SUPHOST} 130.endif 131 132# Object directory base in primary make. Note that when we rerun make 133# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 134# subdirectory because the rest of the build system needs it that way. 135# The original object directory base is saved in OBJTREE. 136# 137MAKEOBJDIRPREFIX?= /usr/obj 138OBJTREE?= ${MAKEOBJDIRPREFIX} 139 140# Used for stage installs and pathing 141# 142DESTDIRBASE?= ${OBJTREE}${.CURDIR} 143 144TARGET_ARCH?= ${MACHINE_ARCH} 145.if ${TARGET_ARCH} == ${MACHINE_ARCH} 146TARGET?= ${MACHINE} 147.else 148TARGET?= ${TARGET_ARCH} 149.endif 150.if make(buildworld) 151BUILD_ARCH!= sysctl -n hw.machine_arch 152.if ${MACHINE_ARCH} != ${BUILD_ARCH} 153.error To cross-build, set TARGET_ARCH. 154.endif 155.endif 156 157# BTOOLS (Natively built) All non-cross-development tools that the 158# main build needs. This includes things like 'mkdir' and 'rm'. 159# We will not use the native system's exec path once we start 160# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 161# 162# CTOOLS (Natively built) Cross development tools which are specific 163# to the target architecture. 164# 165# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 166# CTOOLS. 167# 168# MACHINE_ARCH Architecture we are building on 169# TARGET_ARCH Architecture we are building for 170# 171BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 172CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 173WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 174 175# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 176# cross-tools stages to augment the existing command path to access newer 177# versions of certain utilities such as 'patch' that the cross-tools stage 178# might expect. 179# 180BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 181 182# The strict temporary command path contains all binaries required 183# by the buildworld system after the cross-tools stage. 184# 185STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 186 187TMPDIR?= /tmp 188TMPPID!= echo $$$$ 189 190# 191# Building a world goes through the following stages 192# 193# 1. bootstrap-tool stage [BMAKE] 194# This stage is responsible for creating programs that 195# are needed for backward compatibility reasons. They 196# are not built as cross-tools. 197# 2. build-tool stage [TMAKE] 198# This stage is responsible for creating the object 199# tree and building any tools that are needed during 200# the build process. 201# 3. cross-tool stage [XMAKE] 202# This stage is responsible for creating any tools that 203# are needed for cross-builds. A cross-compiler is one 204# of them. 205# 4. world stage [WMAKE] 206# This stage actually builds the world. 207# 5. install stage (optional) [IMAKE] 208# This stage installs a previously built world. 209# 210 211# bootstrap-tool stage 212# 213BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 214 OBJTREE=${OBJTREE} \ 215 DESTDIR=${BTOOLSDEST} \ 216 PATH=${BTOOLSPATH}:${PATH} \ 217 INSTALL="sh ${.CURDIR}/tools/install.sh" 218 219BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 220 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 221 -DNO_WERROR 222 223# build-tool stage 224# 225TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 226 OBJTREE=${OBJTREE} \ 227 DESTDIR= \ 228 PATH=${BTOOLSPATH}:${PATH} \ 229 INSTALL="sh ${.CURDIR}/tools/install.sh" 230 231TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 232 -DNO_FORTRAN 233 234# cross-tool stage 235# 236# note: TOOLS_PREFIX points to the obj root holding the cross 237# compiler binaries, while USRDATA_PREFIX points to the obj root 238# holding the target environment (and also determines where cross-built 239# libraries, crt*.o, and include files are installed). 240# 241XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 242 OBJTREE=${OBJTREE} \ 243 DESTDIR=${CTOOLSDEST} \ 244 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 245 TOOLS_PREFIX=${CTOOLSDEST} \ 246 USRDATA_PREFIX=${WORLDDEST} \ 247 PATH=${BTOOLSPATH}:${PATH} 248 249XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \ 250 -DBOOTSTRAPPING 251 252# world stage, note the strict path and note that TOOLS_PREFIX is left 253# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 254# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 255# for both binary and library paths, even though it is being compiled to 256# WORLDDEST. None of the programs in the world stage are ever actually 257# executed during the buildworld/installworld. 258# 259CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 260 OBJTREE=${OBJTREE} \ 261 MACHINE_ARCH=${TARGET_ARCH} \ 262 MACHINE=${TARGET} \ 263 OBJFORMAT_PATH=${CTOOLSDEST} 264 265WMAKEENV= ${CROSSENV} \ 266 DESTDIR=${WORLDDEST} \ 267 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 268 PATH=${STRICTTMPPATH} 269 270WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 271 272# install stage 273# 274IMAKEENV= ${CROSSENV} \ 275 PATH=${STRICTTMPPATH} 276IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 277 278# kernel stage 279# 280KMAKEENV= ${WMAKEENV} 281 282# buildworld 283# 284# Attempt to rebuild the entire system, with reasonable chance of 285# success, regardless of how old your existing system is. 286# 287_worldtmp: 288 @echo 289 @echo "--------------------------------------------------------------" 290 @echo ">>> Rebuilding the temporary build tree" 291 @echo "--------------------------------------------------------------" 292.if !defined(NOCLEAN) 293 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 294.else 295 # XXX - These two can depend on any header file. 296 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 297 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 298.endif 299 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 300.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 301 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 302 -p ${_dir}/ > /dev/null 303 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 304 -p ${_dir}/usr > /dev/null 305.endfor 306 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 307 -p ${WORLDDEST}/usr/include > /dev/null 308 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 309 310_bootstrap-tools: 311 @echo 312 @echo "--------------------------------------------------------------" 313 @echo ">>> stage 1: bootstrap tools" 314 @echo "--------------------------------------------------------------" 315 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 316_cleanobj: 317 @echo 318 @echo "--------------------------------------------------------------" 319 @echo ">>> stage 2a: cleaning up the object tree" 320 @echo "--------------------------------------------------------------" 321 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 322_obj: 323 @echo 324 @echo "--------------------------------------------------------------" 325 @echo ">>> stage 2b: rebuilding the object tree" 326 @echo "--------------------------------------------------------------" 327 cd ${.CURDIR}; ${WMAKE} par-obj 328_build-tools: 329 @echo 330 @echo "--------------------------------------------------------------" 331 @echo ">>> stage 2c: build tools" 332 @echo "--------------------------------------------------------------" 333 cd ${.CURDIR}; ${TMAKE} build-tools 334_cross-tools: 335 @echo 336 @echo "--------------------------------------------------------------" 337 @echo ">>> stage 3: cross tools" 338 @echo "--------------------------------------------------------------" 339 cd ${.CURDIR}; ${XMAKE} cross-tools 340_includes: 341 @echo 342 @echo "--------------------------------------------------------------" 343 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 344 @echo "--------------------------------------------------------------" 345 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 346_libraries: 347 @echo 348 @echo "--------------------------------------------------------------" 349 @echo ">>> stage 4b: building libraries" 350 @echo "--------------------------------------------------------------" 351 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 352_depend: 353 @echo 354 @echo "--------------------------------------------------------------" 355 @echo ">>> stage 4c: make dependencies" 356 @echo "--------------------------------------------------------------" 357 cd ${.CURDIR}; ${WMAKE} par-depend 358everything: 359 @echo 360 @echo "--------------------------------------------------------------" 361 @echo ">>> stage 4d: building everything.." 362 @echo "--------------------------------------------------------------" 363 cd ${.CURDIR}; ${WMAKE} all 364 365# note: buildworld no longer depends on _cleanobj because we rm -rf the 366# entire object tree and built the bootstrap tools in a different location. 367# 368# buildworld - build everything from scratch 369# quickworld - skip the bootstrap, build, and cross-build steps 370# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 371# 372# note: we include _obj in realquickworld to prevent accidental creation 373# of files in /usr/src. 374 375WMAKE_TGTS= 376.if !defined(SUBDIR_OVERRIDE) 377WMAKE_TGTS+= _worldtmp _bootstrap-tools 378.endif 379WMAKE_TGTS+= _obj _build-tools 380.if !defined(SUBDIR_OVERRIDE) 381WMAKE_TGTS+= _cross-tools 382.endif 383WMAKE_TGTS+= _includes _libraries _depend everything 384 385buildworld: ${WMAKE_TGTS} 386 387quickworld: _obj _includes _libraries _depend everything 388 389realquickworld: _obj _includes _libraries everything 390 391crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 392 393.ORDER: ${WMAKE_TGTS} 394 395# 396# installcheck 397# 398# Checks to be sure system is ready for installworld 399# 400installcheck: 401.if !defined(NO_SENDMAIL) 402 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 403 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 404.endif 405 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 406 @pw usershow _ntp || (echo "You may need to run 'make preupgrade' first"; exit 1) 407 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1) 408 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 409 @pw groupshow _ntp || (echo "You may need to run 'make preupgrade' first"; exit 1) 410.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 411 @case `uname -r` in 1.2*|1.3-*|1.3.0-*|1.3.1-*|1.3.2-*|1.3.3-*) echo "You must upgrade your kernel to at least 1.3.4 and reboot before you can safely installworld, due to stat(2) ABI changes" ; exit 1;; esac 412.endif 413 414# distributeworld 415# 416# Distributes everything compiled by a `buildworld'. 417# 418# installworld 419# 420# Installs everything compiled by a 'buildworld'. 421# 422distributeworld installworld: installcheck 423 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 424 425# 426# reinstall 427# 428# If you have a build server, you can NFS mount the source and obj directories 429# and do a 'make reinstall' on the *client* to install new binaries from the 430# most recent server build. 431# 432reinstall: 433 @echo "--------------------------------------------------------------" 434 @echo ">>> Making hierarchy" 435 @echo "--------------------------------------------------------------" 436 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 437 @echo 438 @echo "--------------------------------------------------------------" 439 @echo ">>> Installing everything.." 440 @echo "--------------------------------------------------------------" 441 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 442.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 443 @echo 444 @echo "--------------------------------------------------------------" 445 @echo ">>> Rebuilding man page indices" 446 @echo "--------------------------------------------------------------" 447 cd ${.CURDIR}/share/man; ${MAKE} makedb 448.endif 449 450redistribute: 451 @echo "--------------------------------------------------------------" 452 @echo ">>> Distributing everything.." 453 @echo "--------------------------------------------------------------" 454 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 455 456# 457# buildkernel, nativekernel, quickkernel, and installkernel 458# 459# Which kernels to build and/or install is specified by setting 460# KERNCONF. If not defined a GENERIC kernel is built/installed. 461# Only the existing (depending TARGET) config files are used 462# for building kernels and only the first of these is designated 463# as the one being installed. 464# 465# You can specify INSTALLSTRIPPED=1 if you wish the installed 466# kernel and modules to be stripped of its debug info (required 467# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 468# if you only want to strip the modules of their debug info. These 469# only apply if you have DEBUG=-g in your kernel config or make line. 470# 471# Note that we have to use TARGET instead of TARGET_ARCH when 472# we're in kernel-land. Since only TARGET_ARCH is (expected) to 473# be set to cross-build, we have to make sure TARGET is set 474# properly. 475 476.if !defined(KERNCONF) && defined(KERNEL) 477KERNCONF= ${KERNEL} 478KERNWARN= yes 479.else 480KERNCONF?= GENERIC 481.endif 482INSTKERNNAME?= kernel 483 484KRNLSRCDIR= ${.CURDIR}/sys 485KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf 486KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 487KERNCONFDIR?= ${KRNLCONFDIR} 488 489BUILDKERNELS= 490INSTALLKERNEL= 491.for _kernel in ${KERNCONF} 492.if exists(${KERNCONFDIR}/${_kernel}) 493BUILDKERNELS+= ${_kernel} 494.if empty(INSTALLKERNEL) 495INSTALLKERNEL= ${_kernel} 496.endif 497.endif 498.endfor 499 500# kernel version numbers survive rm -rf 501# 502.for _kernel in ${BUILDKERNELS} 503.if exists(${KRNLOBJDIR}/${_kernel}/version) 504KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 505.endif 506.endfor 507 508# 509# buildkernel 510# 511# Builds all kernels defined by BUILDKERNELS. 512# 513bk_tools: 514 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 515 echo "You must buildworld before buildkernel. If you wish"; \ 516 echo "to build a kernel using native tools, config it manually"; \ 517 echo "or use the nativekernel target if you are in a rush"; \ 518 exit 1; \ 519 fi 520 521maybe_bk_tools: 522.for _kernel in ${BUILDKERNELS} 523 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 524 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 525 echo "The kernel was build using buildworld tools which no" ; \ 526 echo "longer appear to exist, quickkernel failed!" ; \ 527 exit 1; \ 528 fi; \ 529 fi 530.endfor 531 532bk_build_list: 533.if empty(BUILDKERNELS) 534 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})." 535 @false 536.endif 537 538bk_kernwarn: 539.if defined(KERNWARN) 540 @echo "--------------------------------------------------------------" 541 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 542 @echo "--------------------------------------------------------------" 543 @sleep 3 544.endif 545 @echo 546 547# The buildkernel target rebuilds the specified kernels from scratch 548# using the crossbuild tools generated by the last buildworld. It is 549# the safest (but also the most time consuming) way to build a new kernel. 550# 551buildkernel: bk_tools bk_build_list bk_kernwarn 552.for _kernel in ${BUILDKERNELS} 553 @echo "--------------------------------------------------------------" 554 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 555 @echo "--------------------------------------------------------------" 556 @echo "===> ${_kernel}" 557.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 558 rm -rf ${KRNLOBJDIR}/${_kernel} 559.else 560 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 561 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 562 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 563.endif 564 mkdir -p ${KRNLOBJDIR} 565.if !defined(NO_KERNELCONFIG) 566 cd ${KRNLCONFDIR}; \ 567 PATH=${STRICTTMPPATH} \ 568 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 569 ${KERNCONFDIR}/${_kernel} 570.endif 571.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 572 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 573.endif 574 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 575 cd ${KRNLOBJDIR}/${_kernel}; \ 576 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \ 577 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile 578.if !defined(NO_KERNELDEPEND) 579 cd ${KRNLOBJDIR}/${_kernel}; \ 580 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend 581.endif 582 cd ${KRNLOBJDIR}/${_kernel}; \ 583 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 584 @echo "--------------------------------------------------------------" 585 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 586 @echo "--------------------------------------------------------------" 587.endfor 588 589# The nativekernel target rebuilds the specified kernels from scratch 590# using the systems standard compiler rather then using the crossbuild 591# tools generated by the last buildworld. This is fairly safe if your 592# system is reasonable up-to-date. 593# 594nativekernel: bk_build_list bk_kernwarn 595.for _kernel in ${BUILDKERNELS} 596 @echo "--------------------------------------------------------------" 597 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 598 @echo "--------------------------------------------------------------" 599 @echo "===> ${_kernel}" 600.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 601 rm -rf ${KRNLOBJDIR}/${_kernel} 602.else 603 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 604 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 605 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 606.endif 607 mkdir -p ${KRNLOBJDIR} 608.if !defined(NO_KERNELCONFIG) 609 cd ${KRNLCONFDIR}; \ 610 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 611 ${KERNCONFDIR}/${_kernel} 612.endif 613.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 614 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 615.endif 616 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 617 cd ${KRNLOBJDIR}/${_kernel}; \ 618 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \ 619 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile 620.if !defined(NO_KERNELDEPEND) 621 cd ${KRNLOBJDIR}/${_kernel}; \ 622 ${MAKE} KERNEL=${INSTKERNNAME} depend 623.endif 624 cd ${KRNLOBJDIR}/${_kernel}; \ 625 ${MAKE} KERNEL=${INSTKERNNAME} all 626 @echo "--------------------------------------------------------------" 627 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 628 @echo "--------------------------------------------------------------" 629.endfor 630 631# The quickkernel target rebuilds the specified kernels as quickly 632# as possible. It will use the native tools or the buildworld cross tools 633# based on whether the kernel was originally generated via buildkernel or 634# nativekernel. Config is rerun but the object hierarchy is not rebuilt, 635# nor is the make depend step run. 636# 637quickkernel: maybe_bk_tools bk_build_list bk_kernwarn 638.for _kernel in ${BUILDKERNELS} 639 @echo "--------------------------------------------------------------" 640 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 641 @echo "--------------------------------------------------------------" 642 @echo "===> ${_kernel}" 643.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 644.if !defined(NO_KERNELCONFIG) 645 cd ${KRNLCONFDIR}; \ 646 PATH=${STRICTTMPPATH} \ 647 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 648 ${KERNCONFDIR}/${_kernel} 649.endif 650 cd ${KRNLOBJDIR}/${_kernel}; \ 651 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 652.else 653.if !defined(NO_KERNELCONFIG) 654 cd ${KRNLCONFDIR}; \ 655 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 656 ${KERNCONFDIR}/${_kernel} 657.endif 658 cd ${KRNLOBJDIR}/${_kernel}; \ 659 ${MAKE} KERNEL=${INSTKERNNAME} all 660.endif 661 @echo "--------------------------------------------------------------" 662 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 663 @echo "--------------------------------------------------------------" 664.endfor 665 666 667# installkernel 668# 669# Install the kernel defined by INSTALLKERNEL 670# 671installkernel reinstallkernel: 672.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 673 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 674 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 675.else 676 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 677 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 678.endif 679 680# 681# update 682# 683# Update the source tree, by running sup and/or running cvs to update to the 684# latest copy. 685# 686update: 687.if defined(SUP_UPDATE) 688 @echo "--------------------------------------------------------------" 689 @echo ">>> Running ${SUP}" 690 @echo "--------------------------------------------------------------" 691.if defined(SUPFILE) 692 @${SUP} ${SUPFLAGS} ${SUPFILE} 693.endif 694.if defined(SUPFILE1) 695 @${SUP} ${SUPFLAGS} ${SUPFILE1} 696.endif 697.if defined(SUPFILE2) 698 @${SUP} ${SUPFLAGS} ${SUPFILE2} 699.endif 700.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 701 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 702.endif 703.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 704 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 705.endif 706.endif 707.if defined(CVS_UPDATE) 708 @echo "--------------------------------------------------------------" 709 @echo ">>> Updating ${.CURDIR} from cvs repository `cat ${.CURDIR}/CVS/Root`" 710 @echo "--------------------------------------------------------------" 711 @sleep 2 712 cd ${.CURDIR}; cvs -q update -P -d 713.endif 714 715# 716# most 717# 718# Build most of the user binaries on the existing system libs and includes. 719# 720most: 721 @echo "--------------------------------------------------------------" 722 @echo ">>> Building programs only" 723 @echo "--------------------------------------------------------------" 724.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 725 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 726.endfor 727 728# 729# installmost 730# 731# Install the binaries built by the 'most' target. This does not include 732# libraries or include files. 733# 734installmost: 735 @echo "--------------------------------------------------------------" 736 @echo ">>> Installing programs only" 737 @echo "--------------------------------------------------------------" 738.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 739 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 740.endfor 741 742# 743# ------------------------------------------------------------------------ 744# 745# From here onwards are utility targets used by the 'make world' and 746# related targets. If your 'world' breaks, you may like to try to fix 747# the problem and manually run the following targets to attempt to 748# complete the build. Beware, this is *not* guaranteed to work, you 749# need to have a pretty good grip on the current state of the system 750# to attempt to manually finish it. If in doubt, 'make world' again. 751# 752 753# bootstrap-tools: Build all tools required to build all tools. Note that 754# order is important in a number of cases and also note that the bootstrap 755# and build tools stages have access to earlier binaries they themselves 756# had generated. 757# 758# patch: older patch's do not have -i. This program must be built 759# first so other bootstrap tools that need to apply patches 760# can use it. 761# [x]install: dependancies on various new install features 762# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 763# envs are not compatible with older objformat binaries. 764# 765.if exists(${.CURDIR}/games) && !defined(NOGAMES) 766_strfile= games/fortune/strfile 767.endif 768 769bootstrap-tools: 770 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 771.for _tool in ${_strfile} \ 772 usr.bin/patch \ 773 bin/chmod bin/cp bin/dd bin/mkdir bin/rm bin/echo bin/test \ 774 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh bin/ls \ 775 bin/hostname bin/kill \ 776 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \ 777 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk \ 778 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \ 779 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 780 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 781 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \ 782 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \ 783 usr.bin/vi usr.bin/cap_mkdb usr.bin/vgrind usr.bin/true usr.bin/false \ 784 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \ 785 usr.bin/tail \ 786 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 787 usr.sbin/btxld usr.sbin/pwd_mkdb usr.sbin/zic usr.sbin/makewhatis \ 788 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \ 789 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb 790 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 791 cd ${.CURDIR}/${_tool}; \ 792 ${MAKE} DIRPRFX=${_tool}/ obj; \ 793 ${MAKE} DIRPRFX=${_tool}/ depend; \ 794 ${MAKE} DIRPRFX=${_tool}/ all; \ 795 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 796.endfor 797 touch ${BTOOLSDEST}/.bootstrap_done 798 799# build-tools: Build special purpose build tools. 800# 801# XXX we may be able to remove or consolidate this into bootstrap-tools 802# now that we have the native helper (.nx/.no) infrastructure. 803# 804.if exists(${.CURDIR}/games) && !defined(NOGAMES) 805_games= games/adventure games/hack games/phantasia 806.endif 807 808.if exists(${.CURDIR}/share) && !defined(NOSHARE) 809_share= share/syscons/scrnmaps 810.endif 811 812_gcc34_cross= gnu/usr.bin/cc34 813_gcc34_tools= gnu/usr.bin/cc34/cc_prep gnu/usr.bin/cc34/cc_tools 814_binutils= gnu/usr.bin/binutils215 815 816.if !defined(NO_FORTRAN) 817_fortran= gnu/usr.bin/cc34/f771 818.endif 819 820.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 821 !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 822_libkrb5= kerberos5/tools kerberos5/lib/libroken kerberos5/lib/libvers \ 823 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 824.endif 825 826.if defined(RELEASEDIR) 827_sysinstall= release/sysinstall 828.endif 829 830build-tools: 831.for _tool in ${_gcc34_tools} ${_fortran} ${_libkrb5} ${_share} ${_sysinstall} 832 ${ECHODIR} "===> ${_tool} (build-tools)"; \ 833 cd ${.CURDIR}/${_tool}; \ 834 ${MAKE} DIRPRFX=${_tool}/ obj; \ 835 ${MAKE} DIRPRFX=${_tool}/ depend; \ 836 ${MAKE} DIRPRFX=${_tool}/ all; \ 837 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 838.endfor 839 touch ${BTOOLSDEST}/.build_done 840 841# 842# cross-tools: Build cross-building tools 843# 844.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 845_btxld= usr.sbin/btxld 846.endif 847 848cross-tools: 849.for _tool in ${_btxld} ${_binutils} \ 850 usr.bin/objformat usr.sbin/crunch/crunchide \ 851 ${_gcc34_cross} 852 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 853 cd ${.CURDIR}/${_tool}; \ 854 ${MAKE} DIRPRFX=${_tool}/ obj; \ 855 ${MAKE} DIRPRFX=${_tool}/ depend; \ 856 ${MAKE} DIRPRFX=${_tool}/ all; \ 857 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 858.endfor 859 touch ${CTOOLSDEST}/.cross_done 860 861# 862# hierarchy - ensure that all the needed directories are present 863# 864hierarchy: 865 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 866 867# 868# libraries - build all libraries, and install them under ${DESTDIR}. 869# 870# The list of libraries with dependents (${_prebuild_libs}) and their 871# interdependencies (__L) are built automatically by the 872# ${.CURDIR}/tools/make_libdeps.sh script. 873# 874# .makeenv does not work when bootstrapping from 4.x, so we must be sure 875# to specify the correct CCVER or 'cc' will not exec the correct compiler. 876# 877libraries: 878 cd ${.CURDIR}; \ 879 HOST_CCVER=${HOST_CCVER} CCVER=gcc34 \ 880 ${MAKE} -f Makefile.inc1 _startup_libs34; \ 881 ${MAKE} -f Makefile.inc1 _startup_libs; \ 882 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 883 ${MAKE} -f Makefile.inc1 _generic_libs; 884 touch ${WORLDDEST}/.libraries_done 885 886# These dependencies are not automatically generated: 887# 888# gnu/lib/${CCVER}/libgcc and lib/csu must be built before all 889# shared libraries for ELF. The target for _startup_libs34 is 890# specifically built using gcc34. 891# 892_startup_libs34= gnu/lib/gcc34/libgcc 893_startup_libs= lib/csu/${MACHINE_ARCH} 894_startup_libs+= lib/csu/common lib/libc lib/libc_rtld 895 896_prebuild_libs= lib/libarchive 897_prebuild_libs+= lib/libutil 898 899_generic_libs= gnu/lib 900 901.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 902_prebuild_libs+= kerberos5/tools 903_prebuild_libs+= kerberos5/lib/libasn1 904_prebuild_libs+= kerberos5/lib/libgssapi 905_prebuild_libs+= kerberos5/lib/libkrb5 906_prebuild_libs+= kerberos5/lib/libroken 907_generic_libs+= kerberos5/lib 908.endif 909 910_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \ 911 lib/libncurses/libncurses lib/libopie lib/libradius \ 912 lib/libskey lib/libtacplus lib/libz lib/libm lib/libpam 913 914lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 915lib/libskey__L: lib/libcrypt__L lib/libmd__L 916 917_generic_libs+= lib 918 919.if !defined(NOCRYPT) 920.if !defined(NO_OPENSSL) 921_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 922.if !defined(NO_OPENSSH) 923_prebuild_libs+= secure/lib/libssh 924secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 925.endif 926.endif 927_generic_libs+= secure/lib 928.endif 929 930_generic_libs+= usr.bin/lex/lib 931 932.for _lib in ${_startup_libs2} ${_startup_libs3} ${_startup_libs34} \ 933 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 934${_lib}__L: .PHONY 935.if exists(${.CURDIR}/${_lib}) 936 ${ECHODIR} "===> ${_lib}"; \ 937 cd ${.CURDIR}/${_lib}; \ 938 ${MAKE} DIRPRFX=${_lib}/ depend; \ 939 ${MAKE} DIRPRFX=${_lib}/ all; \ 940 ${MAKE} DIRPRFX=${_lib}/ install 941.endif 942.endfor 943 944_startup_libs: ${_startup_libs:S/$/__L/} 945_startup_libs34: ${_startup_libs34:S/$/__L/} 946_prebuild_libs: ${_prebuild_libs:S/$/__L/} 947_generic_libs: ${_generic_libs:S/$/__L/} 948 949# library targets must be ordered because there are inter-library 950# races (e.g. generation of tconfig.h) 951# 952.ORDER: ${_startup_libs34:S/$/__L/} 953.ORDER: ${_startup_libs:S/$/__L/} 954.ORDER: ${_prebuild_libs:S/$/__L/} 955.ORDER: ${_generic_libs:S/$/__L/} 956 957.for __target in clean cleandepend cleandir obj depend includes 958.for entry in ${SUBDIR} 959${entry}.${__target}__D: .PHONY 960 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 961 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 962 edir=${entry}.${MACHINE_ARCH}; \ 963 cd ${.CURDIR}/$${edir}; \ 964 else \ 965 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 966 edir=${entry}; \ 967 cd ${.CURDIR}/$${edir}; \ 968 fi; \ 969 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 970.endfor 971par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 972.ORDER: ${SUBDIR:S/$/.${__target}__D/} 973.endfor 974.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 975 976# The wmake target is used by /usr/bin/wmake to run make in a 977# world build environment. 978# 979wmake: 980 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}' 981 982wmakeenv: 983 @echo '${WMAKEENV} /bin/sh' 984 985bmake: 986 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}' 987 988bmakeenv: 989 @echo '${BMAKEENV} /bin/sh' 990 991tmake: 992 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}' 993 994tmakeenv: 995 @echo '${TMAKEENV} /bin/sh' 996 997.include <bsd.subdir.mk> 998 999