xref: /dragonfly/contrib/bmake/configure.in (revision 5f1e34d9)

dnl
dnl RCSid:
dnl	$Id: configure.in,v 1.49 2013/07/06 18:25:19 sjg Exp $
dnl
dnl Process this file with autoconf to produce a configure script
dnl
AC_INIT([bmake], [20130706], [sjg@NetBSD.org])
AC_CONFIG_HEADER(config.h)

dnl make srcdir absolute
case "$srcdir" in
/*) ;;
*) srcdir=`cd $srcdir && pwd`;;
esac

dnl
AC_ARG_WITH(defshell,
[  --with-defshell=SHELL  use SHELL by default - must be sh compatible, use sh or ksh to pick the internal definitions],
[case "${withval}" in
yes)   AC_MSG_ERROR(bad value ${withval} given for bmake DEFSHELL) ;;
no)    ;;
*)     case "$with_defshell" in
       sh)  DEFSHELL_INDEX=DEFSHELL_INDEX_SH;;	# it's the default anyway
       ksh) DEFSHELL_INDEX=DEFSHELL_INDEX_KSH;;
       csh) DEFSHELL_INDEX=DEFSHELL_INDEX_CSH;;	# kidding right?
       *)   defshell_path=$with_defshell;;	# better be sh compatible!
       esac
       ;;
       esac])
dnl
use_meta=yes
AC_ARG_WITH(meta,
[ --without-meta dissable use of meta-mode],
[case "${withval}" in
yes|no) use_meta=${withval};;
*) AC_MSG_ERROR(bad value ${withval} given for meta) ;;
esac])
dnl
AC_ARG_WITH(filemon,
[ --with-filemon=path/filemon.h indicate path to filemon.h for meta-mode],
[ case "/${withval}" in
/no|*/filemon.h) filemon_h="${withval}";;
*/filemon*) filemon_h="${withval}/filemon.h";;
*) AC_MSG_ERROR(bad value ${withval} given for filemon) ;;
esac],
[
OS=`uname -s`
for d in "/usr/include/dev/filemon" "$prefix/include/dev/filemon" "$srcdir/filemon" "$srcdir/../filemon" "$srcdir/../../sys/dev/filemon"
do
	for x in "/$OS" ""
	do
		filemon_h="$d$x/filemon.h"
		test -s "$filemon_h" && break
	done
	test -s "$filemon_h" && break
done
test -s "${filemon_h:-/dev/null}" || filemon_h=no
])
dnl echo "Note: use_meta=$use_meta filemon_h=$filemon_h" >&6
case "$use_meta" in
yes)
	case "$filemon_h" in
	*.h) echo "Using: filemon=$filemon_h" >&6;;
	esac
	;;
esac
dnl
dnl Check for OS problems
dnl Solaris's signal.h only privides sigset_t etc if one of
dnl _EXTENSIONS_ _POSIX_C_SOURCE or _XOPEN_SOURCE are defined.
dnl The later two seem to cause more problems than they solve so if we
dnl see _EXTENSIONS_ we use it.
AC_USE_SYSTEM_EXTENSIONS
dnl Checks for programs.
AC_PROG_CC
AC_PROG_GCC_TRADITIONAL
AC_PROG_INSTALL
dnl Executable suffix - normally empty; .exe on os2.
AC_SUBST(ac_exe_suffix)dnl

dnl
dnl AC_C_CROSS
dnl

dnl Checks for header files.
AC_HEADER_STDC
AC_HEADER_SYS_WAIT
AC_HEADER_DIRENT
dnl Keep this list sorted
AC_CHECK_HEADERS( \
	ar.h \
	err.h \
	fcntl.h \
	paths.h \
	poll.h \
	ranlib.h \
	string.h \
	sys/mman.h \
	sys/select.h \
	sys/socket.h \
	sys/time.h \
	sys/uio.h \
	unistd.h \
	utime.h \
	)

dnl Both *BSD and Linux have sys/cdefs.h, most do not.
dnl If it is missing, we add -I${srcdir}/missing to CFLAGS
dnl also if sys/cdefs.h does not have __RCSID we need to use ours
dnl but we need to include the host's one too *sigh*
AC_CHECK_HEADER(sys/cdefs.h,
echo $ECHO_N "checking whether sys/cdefs.h is compatible... $ECHO_C" >&6
AC_EGREP_CPP(yes,
[#include <sys/cdefs.h>
#ifdef __RCSID
yes
#endif
],
echo yes  >&6,
echo no  >&6; CPPFLAGS="${CPPFLAGS} -I`cd ${srcdir}/missing && pwd` -DNEED_HOST_CDEFS_H"),
CPPFLAGS="${CPPFLAGS} -I`cd ${srcdir}/missing && pwd`")

dnl Checks for typedefs, structures, and compiler characteristics.
AC_C___ATTRIBUTE__
AC_C_BIGENDIAN
AC_C_CONST
AC_TYPE_OFF_T
AC_TYPE_PID_T
AC_TYPE_SIZE_T
AC_DECL_SYS_SIGLIST
AC_HEADER_TIME
AC_STRUCT_TM

dnl Checks for library functions.
AC_TYPE_SIGNAL
AC_FUNC_VFORK
AC_FUNC_VPRINTF
AC_FUNC_WAIT3
dnl Keep this list sorted
AC_CHECK_FUNCS( \
	err \
	errx \
	getcwd \
	getenv \
	getopt \
	getwd \
	killpg \
	mmap \
	putenv \
	select \
	setenv \
	setpgid \
	setsid \
	sigaction \
	sigvec \
	snprintf \
	strerror \
	strftime \
	strsep \
	strtod \
	strtol \
	unsetenv \
	vsnprintf \
	wait3 \
	wait4 \
	waitpid \
	warn \
	warnx \
	)

dnl functions which we may need to provide
AC_REPLACE_FUNCS( \
	realpath \
	dirname \
	stresep \
	strlcpy \
	)

AC_CHECK_LIB([util], [emalloc],
    [ AC_CHECK_LIB([util], [erealloc],
      [ AC_CHECK_LIB([util], [estrdup],
        [ AC_CHECK_LIB([util], [estrndup],
	  [ LIBS="$LIBS -lutil"
	    CPPFLAGS="$CPPFLAGS -DUSE_EMALLOC" ])])])])

dnl
dnl Structures
dnl
AC_HEADER_STAT
AC_STRUCT_ST_RDEV
dnl
dnl we want this for unit-tests/Makefile
echo $ECHO_N "checking if diff -u works... $ECHO_C" >&6
if diff -u /dev/null /dev/null > /dev/null 2>&1; then
   diff_u=-u
   echo yes >&6
else
   diff_u=
   echo no >&6
fi
dnl
dnl AC_* don't quite cut it.
dnl
echo "checking for MACHINE & MACHINE_ARCH..." >&6
cat > conftest.$ac_ext <<EOF
#include "confdefs.h"
#include <sys/param.h>
#ifdef MACHINE
machine=MACHINE
#endif
#ifdef MACHINE_ARCH
machine_arch=MACHINE_ARCH
#endif
EOF

default_machine=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 |
	egrep machine= | tr -d ' "'`
rm -rf conftest*
if test "$default_machine"; then
	eval "$default_machine"
fi
machine=${machine:-`$srcdir/machine.sh`}
machine_arch=${machine_arch:-`$srcdir/machine.sh arch`}
echo "defaults: MACHINE=$machine, MACHINE_ARCH=$machine_arch" 1>&6
dnl
dnl now allow overrides
dnl
AC_ARG_WITH(machine,
[  --with-machine=MACHINE  explicitly set MACHINE],
[case "${withval}" in
yes)   AC_MSG_ERROR(bad value ${withval} given for bmake MACHINE) ;;
no)    ;;
generic) machine=`$srcdir/machine.sh`;;
*)     machine=$with_machine;;
esac])
force_machine=
AC_ARG_WITH(force_machine,
[  --with-force-machine=MACHINE  set FORCE_MACHINE],
[case "${withval}" in
yes)   force_machine=FORCE_;;
no)    ;;
*)     force_machine=FORCE_; machine=$with_force_machine;;
esac])
dnl
force_machine_arch=
AC_ARG_WITH(force_machine_arch,
[  --with-force-machine-arch=MACHINE  set FORCE_MACHINE_ARCH],
[case "${withval}" in
yes)   force_machine_arch=FORCE_;;
no)    ;;
*)     force_machine_arch=FORCE_; machine_arch=$with_force_machine;;
esac])
dnl
AC_ARG_WITH(machine_arch,
[  --with-machine_arch=MACHINE_ARCH  explicitly set MACHINE_ARCH],
[case "${withval}" in
yes)   AC_MSG_ERROR(bad value ${withval} given for bmake MACHINE_ARCH) ;;
no)    ;;
*)     machine_arch=$with_machine_arch;;
esac])
dnl
dnl Tell them what we ended up with
dnl
echo "Using: ${force_machine}MACHINE=$machine, MACHINE_ARCH=$machine_arch" 1>&6
dnl
dnl Allow folk to control _PATH_DEFSYSPATH
dnl
default_sys_path=\${prefix}/share/mk
AC_ARG_WITH(default-sys-path,
[  --with-default-sys-path=PATH:DIR:LIST  use an explicit _PATH_DEFSYSPATH
	MAKESYSPATH is a ':' separated list of directories
	that bmake will search for system .mk files.
	_PATH_DEFSYSPATH is its default value.],
[case "${withval}" in
yes)	AC_MSG_ERROR(bad value ${withval} given for bmake _PATH_DEFSYSPATH) ;;
no)	;;
*)	default_sys_path="$with_default_sys_path"
	;;
esac])
dnl
dnl Some folk don't like this one
dnl
AC_ARG_WITH(path-objdirprefix,
[  --with-path-objdirprefix=PATH  override _PATH_OBJDIRPREFIX],
[case "${withval}" in
yes)   AC_MSG_ERROR(bad value ${withval} given for bmake _PATH_OBJDIRPREFIX) ;;
no)    CPPFLAGS="$CPPFLAGS -DNO_PATH_OBJDIRPREFIX" ;;
*)     CPPFLAGS="$CPPFLAGS \"-D_PATH_OBJDIRPREFIX=\\\"$with_path-objdir\\\"\"" ;;
esac])
dnl
dnl And this can be handy to do with out.
dnl
AC_ARG_ENABLE(pwd-override,
[  --disable-pwd-override  disable \$PWD overriding getcwd()],
[case "${enableval}" in
yes)   ;;
no)    CPPFLAGS="$CPPFLAGS -DNO_PWD_OVERRIDE" ;;
*)     AC_MSG_ERROR(bad value ${enableval} given for pwd-override option) ;;
esac])
dnl
dnl Just for grins
dnl
AC_ARG_ENABLE(check-make-chdir,
[  --disable-check-make-chdir disable make trying to guess
	when it should automatically cd \${.CURDIR}],
[case "${enableval}" in
yes)   ;;
no)    CPPFLAGS="$CPPFLAGS -DNO_CHECK_MAKE_CHDIR" ;;
*)     AC_MSG_ERROR(bad value ${enableval} given for check-make-chdir option) ;;
esac])
dnl
dnl On non-BSD systems, bootstrap won't work without mk
dnl
AC_ARG_WITH(mksrc,
[  --with-mksrc=PATH tell makefile.boot where to find mk src],
[case "${withval}" in
""|yes|no) ;;
*) test -s $withval/install-mk && mksrc=$withval ||
AC_MSG_ERROR(bad value ${withval} given for mksrc cannot find install-mk)
;;
esac
])
dnl
dnl Now make sure we have a value
dnl
srcdir=`cd $srcdir && pwd`
for mksrc in $mksrc $srcdir/mk $srcdir/../mk mk
do
	test -s $mksrc/install-mk || continue
	mksrc=`cd $mksrc && pwd`
	break
done
mksrc=`echo $mksrc | sed "s,$srcdir,\\\${srcdir},"`
echo "Using: MKSRC=$mksrc" 1>&6
dnl On some systems we want a different default shell by default
if test -x /usr/xpg4/bin/sh; then
        defshell_path=${defshell_path:-/usr/xpg4/bin/sh}
fi
if test -n "$defshell_path"; then
	echo "Using: SHELL=$defshell_path"  >&6
	AC_DEFINE_UNQUOTED(DEFSHELL_CUSTOM, "$defshell_path", Path of default shell)
fi
if test -n "$DEFSHELL_INDEX"; then
       AC_DEFINE_UNQUOTED(DEFSHELL_INDEX, $DEFSHELL_INDEX, Shell spec to use by default)
fi
dnl
AC_SUBST(machine)
AC_SUBST(force_machine)
AC_SUBST(machine_arch)
AC_SUBST(mksrc)
AC_SUBST(default_sys_path)
AC_SUBST(INSTALL)
AC_SUBST(GCC)
AC_SUBST(diff_u)
AC_SUBST(use_meta)
AC_SUBST(filemon_h)
AC_OUTPUT(makefile Makefile.config make-bootstrap.sh unit-tests/Makefile)

cat <<EOF

You can now run

	sh ./make-bootstrap.sh

to produce a fully functional bmake.

EOF