1/* This file contains the definitions of the GIMPLE IR tuples used in GCC. 2 3 Copyright (C) 2007-2018 Free Software Foundation, Inc. 4 Contributed by Aldy Hernandez <aldyh@redhat.com> 5 6This file is part of GCC. 7 8GCC is free software; you can redistribute it and/or modify it under 9the terms of the GNU General Public License as published by the Free 10Software Foundation; either version 3, or (at your option) any later 11version. 12 13GCC is distributed in the hope that it will be useful, but WITHOUT ANY 14WARRANTY; without even the implied warranty of MERCHANTABILITY or 15FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16for more details. 17 18You should have received a copy of the GNU General Public License 19along with GCC; see the file COPYING3. If not see 20<http://www.gnu.org/licenses/>. */ 21 22/* The format of this file is 23 DEFGSCODE(GIMPLE_symbol, printable name, GSS_symbol). */ 24 25 26/* Error marker. This is used in similar ways as ERROR_MARK in tree.def. */ 27DEFGSCODE(GIMPLE_ERROR_MARK, "gimple_error_mark", GSS_BASE) 28 29/* IMPORTANT. Do not rearrange the codes between GIMPLE_COND and 30 GIMPLE_RETURN. The ordering is exposed by gimple_has_ops calls. 31 These are all the GIMPLE statements with register operands. */ 32 33/* GIMPLE_COND <COND_CODE, OP1, OP2, TRUE_LABEL, FALSE_LABEL> 34 represents the conditional jump: 35 36 if (OP1 COND_CODE OP2) goto TRUE_LABEL else goto FALSE_LABEL 37 38 COND_CODE is the tree code used as the comparison predicate. It 39 must be of class tcc_comparison. 40 41 OP1 and OP2 are the operands used in the comparison. They must be 42 accepted by is_gimple_operand. 43 44 TRUE_LABEL and FALSE_LABEL are the LABEL_DECL nodes used as the 45 jump target for the comparison. */ 46DEFGSCODE(GIMPLE_COND, "gimple_cond", GSS_WITH_OPS) 47 48/* GIMPLE_DEBUG represents a debug statement. */ 49DEFGSCODE(GIMPLE_DEBUG, "gimple_debug", GSS_WITH_OPS) 50 51/* GIMPLE_GOTO <TARGET> represents unconditional jumps. 52 TARGET is a LABEL_DECL or an expression node for computed GOTOs. */ 53DEFGSCODE(GIMPLE_GOTO, "gimple_goto", GSS_WITH_OPS) 54 55/* GIMPLE_LABEL <LABEL> represents label statements. LABEL is a 56 LABEL_DECL representing a jump target. */ 57DEFGSCODE(GIMPLE_LABEL, "gimple_label", GSS_WITH_OPS) 58 59/* GIMPLE_SWITCH <INDEX, DEFAULT_LAB, LAB1, ..., LABN> represents the 60 multiway branch: 61 62 switch (INDEX) 63 { 64 case LAB1: ...; break; 65 ... 66 case LABN: ...; break; 67 default: ... 68 } 69 70 INDEX is the variable evaluated to decide which label to jump to. 71 72 DEFAULT_LAB, LAB1 ... LABN are the tree nodes representing case labels. 73 They must be CASE_LABEL_EXPR nodes. */ 74DEFGSCODE(GIMPLE_SWITCH, "gimple_switch", GSS_WITH_OPS) 75 76/* IMPORTANT. 77 78 Do not rearrange the codes between GIMPLE_ASSIGN and GIMPLE_RETURN. 79 It's exposed by GIMPLE_RANGE_CHECK calls. These are all the GIMPLE 80 statements with memory and register operands. */ 81 82/* GIMPLE_ASSIGN <SUBCODE, LHS, RHS1[, RHS2]> represents the assignment 83 statement 84 85 LHS = RHS1 SUBCODE RHS2. 86 87 SUBCODE is the tree code for the expression computed by the RHS of the 88 assignment. It must be one of the tree codes accepted by 89 get_gimple_rhs_class. If LHS is not a gimple register according to 90 is_gimple_reg, SUBCODE must be of class GIMPLE_SINGLE_RHS. 91 92 LHS is the operand on the LHS of the assignment. It must be a tree node 93 accepted by is_gimple_lvalue. 94 95 RHS1 is the first operand on the RHS of the assignment. It must always be 96 present. It must be a tree node accepted by is_gimple_val. 97 98 RHS2 is the second operand on the RHS of the assignment. It must be a tree 99 node accepted by is_gimple_val. This argument exists only if SUBCODE is 100 of class GIMPLE_BINARY_RHS. */ 101DEFGSCODE(GIMPLE_ASSIGN, "gimple_assign", GSS_WITH_MEM_OPS) 102 103/* GIMPLE_ASM <STRING, I1, ..., IN, O1, ... OM, C1, ..., CP> 104 represents inline assembly statements. 105 106 STRING is the string containing the assembly statements. 107 I1 ... IN are the N input operands. 108 O1 ... OM are the M output operands. 109 C1 ... CP are the P clobber operands. 110 L1 ... LQ are the Q label operands. */ 111DEFGSCODE(GIMPLE_ASM, "gimple_asm", GSS_ASM) 112 113/* GIMPLE_CALL <FN, LHS, ARG1, ..., ARGN[, CHAIN]> represents function 114 calls. 115 116 FN is the callee. It must be accepted by is_gimple_call_addr. 117 118 LHS is the operand where the return value from FN is stored. It may 119 be NULL. 120 121 ARG1 ... ARGN are the arguments. They must all be accepted by 122 is_gimple_operand. 123 124 CHAIN is the optional static chain link for nested functions. */ 125DEFGSCODE(GIMPLE_CALL, "gimple_call", GSS_CALL) 126 127/* GIMPLE_TRANSACTION <BODY, LABEL> represents __transaction_atomic and 128 __transaction_relaxed blocks. 129 BODY is the sequence of statements inside the transaction. 130 LABEL is a label for the statement immediately following the 131 transaction. This is before RETURN so that it has MEM_OPS, 132 so that it can clobber global memory. */ 133DEFGSCODE(GIMPLE_TRANSACTION, "gimple_transaction", GSS_TRANSACTION) 134 135/* GIMPLE_RETURN <RETVAL> represents return statements. 136 137 RETVAL is the value to return or NULL. If a value is returned it 138 must be accepted by is_gimple_operand. */ 139DEFGSCODE(GIMPLE_RETURN, "gimple_return", GSS_WITH_MEM_OPS) 140 141/* GIMPLE_BIND <VARS, BLOCK, BODY> represents a lexical scope. 142 VARS is the set of variables declared in that scope. 143 BLOCK is the symbol binding block used for debug information. 144 BODY is the sequence of statements in the scope. */ 145DEFGSCODE(GIMPLE_BIND, "gimple_bind", GSS_BIND) 146 147/* GIMPLE_CATCH <TYPES, HANDLER> represents a typed exception handler. 148 TYPES is the type (or list of types) handled. HANDLER is the 149 sequence of statements that handle these types. */ 150DEFGSCODE(GIMPLE_CATCH, "gimple_catch", GSS_CATCH) 151 152/* GIMPLE_EH_FILTER <TYPES, FAILURE> represents an exception 153 specification. TYPES is a list of allowed types and FAILURE is the 154 sequence of statements to execute on failure. */ 155DEFGSCODE(GIMPLE_EH_FILTER, "gimple_eh_filter", GSS_EH_FILTER) 156 157/* GIMPLE_EH_MUST_NOT_THROW <DECL> represents an exception barrier. 158 DECL is a noreturn function decl taking no arguments that will 159 be invoked if an exception propagates to this point. */ 160DEFGSCODE(GIMPLE_EH_MUST_NOT_THROW, "gimple_eh_must_not_throw", GSS_EH_MNT) 161 162/* GIMPLE_EH_ELSE <N_BODY, E_BODY> must be the sole contents of 163 a GIMPLE_TRY_FINALLY node. For all normal exits from the try block, 164 N_BODY is run; for all exception exits from the try block, 165 E_BODY is run. */ 166DEFGSCODE(GIMPLE_EH_ELSE, "gimple_eh_else", GSS_EH_ELSE) 167 168/* GIMPLE_RESX resumes execution after an exception. */ 169DEFGSCODE(GIMPLE_RESX, "gimple_resx", GSS_EH_CTRL) 170 171/* GIMPLE_EH_DISPATCH demultiplexes an exception edge based on 172 the FILTER argument. */ 173DEFGSCODE(GIMPLE_EH_DISPATCH, "gimple_eh_dispatch", GSS_EH_CTRL) 174 175/* GIMPLE_PHI <RESULT, ARG1, ..., ARGN> represents the PHI node 176 177 RESULT = PHI <ARG1, ..., ARGN> 178 179 RESULT is the SSA name created by this PHI node. 180 181 ARG1 ... ARGN are the arguments to the PHI node. N must be 182 exactly the same as the number of incoming edges to the basic block 183 holding the PHI node. Every argument is either an SSA name or a 184 tree node of class tcc_constant. */ 185DEFGSCODE(GIMPLE_PHI, "gimple_phi", GSS_PHI) 186 187/* GIMPLE_TRY <TRY_KIND, EVAL, CLEANUP> 188 represents a try/catch or a try/finally statement. 189 190 TRY_KIND is either GIMPLE_TRY_CATCH or GIMPLE_TRY_FINALLY. 191 192 EVAL is the sequence of statements to execute on entry to GIMPLE_TRY. 193 194 CLEANUP is the sequence of statements to execute according to 195 TRY_KIND. If TRY_KIND is GIMPLE_TRY_CATCH, CLEANUP is only exected 196 if an exception is thrown during execution of EVAL. If TRY_KIND is 197 GIMPLE_TRY_FINALLY, CLEANUP is always executed after executing EVAL 198 (regardless of whether EVAL finished normally, or jumped out or an 199 exception was thrown). */ 200DEFGSCODE(GIMPLE_TRY, "gimple_try", GSS_TRY) 201 202/* GIMPLE_NOP represents the "do nothing" statement. */ 203DEFGSCODE(GIMPLE_NOP, "gimple_nop", GSS_BASE) 204 205 206/* IMPORTANT. 207 208 Do not rearrange any of the GIMPLE_OMP_* codes. This ordering is 209 exposed by the range check in gimple_omp_subcode(). */ 210 211 212/* Tuples used for lowering of OMP_ATOMIC. Although the form of the OMP_ATOMIC 213 expression is very simple (just in form mem op= expr), various implicit 214 conversions may cause the expression to become more complex, so that it does 215 not fit the gimple grammar very well. To overcome this problem, OMP_ATOMIC 216 is rewritten as a sequence of two codes in gimplification: 217 218 GIMPLE_OMP_LOAD (tmp, mem) 219 val = some computations involving tmp; 220 GIMPLE_OMP_STORE (val). */ 221DEFGSCODE(GIMPLE_OMP_ATOMIC_LOAD, "gimple_omp_atomic_load", 222 GSS_OMP_ATOMIC_LOAD) 223DEFGSCODE(GIMPLE_OMP_ATOMIC_STORE, "gimple_omp_atomic_store", 224 GSS_OMP_ATOMIC_STORE_LAYOUT) 225 226/* GIMPLE_OMP_CONTINUE marks the location of the loop or sections 227 iteration in partially lowered OpenMP code. */ 228DEFGSCODE(GIMPLE_OMP_CONTINUE, "gimple_omp_continue", GSS_OMP_CONTINUE) 229 230/* GIMPLE_OMP_CRITICAL <NAME, BODY> represents 231 232 #pragma omp critical [name] 233 234 NAME is the name given to the critical section. 235 BODY is the sequence of statements that are inside the critical section. */ 236DEFGSCODE(GIMPLE_OMP_CRITICAL, "gimple_omp_critical", GSS_OMP_CRITICAL) 237 238/* GIMPLE_OMP_FOR <BODY, CLAUSES, INDEX, INITIAL, FINAL, COND, INCR, PRE_BODY> 239 represents 240 241 PRE_BODY 242 #pragma omp for [clause1 ... clauseN] 243 for (INDEX = INITIAL; INDEX COND FINAL; INDEX {+=,-=} INCR) 244 BODY 245 246 Likewise for: 247 #pragma acc loop [clause1 ... clauseN] 248 249 BODY is the loop body. 250 251 CLAUSES is the list of clauses. 252 253 INDEX must be an integer or pointer variable, which is implicitly thread 254 private. It must be accepted by is_gimple_operand. 255 256 INITIAL is the initial value given to INDEX. It must be 257 accepted by is_gimple_operand. 258 259 FINAL is the final value that INDEX should take. It must 260 be accepted by is_gimple_operand. 261 262 COND is the condition code for the controlling predicate. It must 263 be one of { <, >, <=, >= } 264 265 INCR is the loop index increment. It must be tree node of type 266 tcc_constant. 267 268 PRE_BODY is a landing pad filled by the gimplifier with things from 269 INIT, COND, and INCR that are technically part of the OMP_FOR 270 structured block, but are evaluated before the loop body begins. 271 272 INITIAL, FINAL and INCR are required to be loop invariant integer 273 expressions that are evaluated without any synchronization. 274 The evaluation order, frequency of evaluation and side-effects are 275 unspecified by the standards. */ 276DEFGSCODE(GIMPLE_OMP_FOR, "gimple_omp_for", GSS_OMP_FOR) 277 278/* GIMPLE_OMP_MASTER <BODY> represents #pragma omp master. 279 BODY is the sequence of statements to execute in the master section. */ 280DEFGSCODE(GIMPLE_OMP_MASTER, "gimple_omp_master", GSS_OMP) 281 282/* GIMPLE_OMP_TASKGROUP <BODY> represents #pragma omp taskgroup. 283 BODY is the sequence of statements to execute in the taskgroup section. */ 284DEFGSCODE(GIMPLE_OMP_TASKGROUP, "gimple_omp_taskgroup", GSS_OMP) 285 286/* GIMPLE_OMP_PARALLEL <BODY, CLAUSES, CHILD_FN, DATA_ARG> represents 287 288 #pragma omp parallel [CLAUSES] 289 BODY 290 291 BODY is a the sequence of statements to be executed by all threads. 292 293 CLAUSES is an OMP_CLAUSE chain with all the clauses. 294 295 CHILD_FN is set when outlining the body of the parallel region. 296 All the statements in BODY are moved into this newly created 297 function when converting OMP constructs into low-GIMPLE. 298 299 DATA_ARG is a local variable in the parent function containing data 300 to be shared with CHILD_FN. This is used to implement all the data 301 sharing clauses. */ 302DEFGSCODE(GIMPLE_OMP_PARALLEL, "gimple_omp_parallel", GSS_OMP_PARALLEL_LAYOUT) 303 304/* GIMPLE_OMP_TASK <BODY, CLAUSES, CHILD_FN, DATA_ARG, COPY_FN, 305 ARG_SIZE, ARG_ALIGN> represents 306 307 #pragma omp task [CLAUSES] 308 BODY 309 310 BODY is a the sequence of statements to be executed by all threads. 311 312 CLAUSES is an OMP_CLAUSE chain with all the clauses. 313 314 CHILD_FN is set when outlining the body of the explicit task region. 315 All the statements in BODY are moved into this newly created 316 function when converting OMP constructs into low-GIMPLE. 317 318 DATA_ARG is a local variable in the parent function containing data 319 to be shared with CHILD_FN. This is used to implement all the data 320 sharing clauses. 321 322 COPY_FN is set when outlining the firstprivate var initialization. 323 All the needed statements are emitted into the newly created 324 function, or when only memcpy is needed, it is NULL. 325 326 ARG_SIZE and ARG_ALIGN are the size and alignment of the incoming 327 data area allocated by GOMP_task and passed to CHILD_FN. */ 328DEFGSCODE(GIMPLE_OMP_TASK, "gimple_omp_task", GSS_OMP_TASK) 329 330/* OMP_RETURN marks the end of an OpenMP directive. */ 331DEFGSCODE(GIMPLE_OMP_RETURN, "gimple_omp_return", GSS_OMP_ATOMIC_STORE_LAYOUT) 332 333/* OMP_SECTION <BODY> represents #pragma omp section. 334 BODY is the sequence of statements in the section body. */ 335DEFGSCODE(GIMPLE_OMP_SECTION, "gimple_omp_section", GSS_OMP) 336 337/* OMP_SECTIONS <BODY, CLAUSES, CONTROL> represents #pragma omp sections. 338 339 BODY is the sequence of statements in the sections body. 340 CLAUSES is an OMP_CLAUSE chain holding the list of associated clauses. 341 CONTROL is a VAR_DECL used for deciding which of the sections 342 to execute. */ 343DEFGSCODE(GIMPLE_OMP_SECTIONS, "gimple_omp_sections", GSS_OMP_SECTIONS) 344 345/* GIMPLE_OMP_SECTIONS_SWITCH is a marker placed immediately after 346 OMP_SECTIONS. It represents the GIMPLE_SWITCH used to decide which 347 branch is taken. */ 348DEFGSCODE(GIMPLE_OMP_SECTIONS_SWITCH, "gimple_omp_sections_switch", GSS_BASE) 349 350/* GIMPLE_OMP_SINGLE <BODY, CLAUSES> represents #pragma omp single 351 BODY is the sequence of statements inside the single section. 352 CLAUSES is an OMP_CLAUSE chain holding the associated clauses. */ 353DEFGSCODE(GIMPLE_OMP_SINGLE, "gimple_omp_single", GSS_OMP_SINGLE_LAYOUT) 354 355/* GIMPLE_OMP_TARGET <BODY, CLAUSES, CHILD_FN> represents 356 #pragma acc {kernels,parallel,data,enter data,exit data,update} 357 #pragma omp target {,data,update} 358 BODY is the sequence of statements inside the construct 359 (NULL for some variants). 360 CLAUSES is an OMP_CLAUSE chain holding the associated clauses. 361 CHILD_FN is set when outlining the body of the offloaded region. 362 All the statements in BODY are moved into this newly created 363 function when converting OMP constructs into low-GIMPLE. 364 DATA_ARG is a vec of 3 local variables in the parent function 365 containing data to be mapped to CHILD_FN. This is used to 366 implement the MAP clauses. */ 367DEFGSCODE(GIMPLE_OMP_TARGET, "gimple_omp_target", GSS_OMP_PARALLEL_LAYOUT) 368 369/* GIMPLE_OMP_TEAMS <BODY, CLAUSES> represents #pragma omp teams 370 BODY is the sequence of statements inside the single section. 371 CLAUSES is an OMP_CLAUSE chain holding the associated clauses. */ 372DEFGSCODE(GIMPLE_OMP_TEAMS, "gimple_omp_teams", GSS_OMP_SINGLE_LAYOUT) 373 374/* GIMPLE_OMP_ORDERED <BODY, CLAUSES> represents #pragma omp ordered. 375 BODY is the sequence of statements to execute in the ordered section. 376 CLAUSES is an OMP_CLAUSE chain holding the associated clauses. */ 377DEFGSCODE(GIMPLE_OMP_ORDERED, "gimple_omp_ordered", GSS_OMP_SINGLE_LAYOUT) 378 379/* GIMPLE_OMP_GRID_BODY <BODY> represents a parallel loop lowered for execution 380 on a GPU. It is an artificial statement created by omp lowering. */ 381DEFGSCODE(GIMPLE_OMP_GRID_BODY, "gimple_omp_gpukernel", GSS_OMP) 382 383/* GIMPLE_PREDICT <PREDICT, OUTCOME> specifies a hint for branch prediction. 384 385 PREDICT is one of the predictors from predict.def. 386 387 OUTCOME is NOT_TAKEN or TAKEN. */ 388DEFGSCODE(GIMPLE_PREDICT, "gimple_predict", GSS_BASE) 389 390/* This node represents a cleanup expression. It is ONLY USED INTERNALLY 391 by the gimplifier as a placeholder for cleanups, and its uses will be 392 cleaned up by the time gimplification is done. 393 394 This tuple should not exist outside of the gimplifier proper. */ 395DEFGSCODE(GIMPLE_WITH_CLEANUP_EXPR, "gimple_with_cleanup_expr", GSS_WCE) 396