xref: /dragonfly/contrib/gdb-7/gdb/record-full.c (revision 0ca59c34)
1 /* Process record and replay target for GDB, the GNU debugger.
2 
3    Copyright (C) 2013 Free Software Foundation, Inc.
4 
5    This file is part of GDB.
6 
7    This program is free software; you can redistribute it and/or modify
8    it under the terms of the GNU General Public License as published by
9    the Free Software Foundation; either version 3 of the License, or
10    (at your option) any later version.
11 
12    This program is distributed in the hope that it will be useful,
13    but WITHOUT ANY WARRANTY; without even the implied warranty of
14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15    GNU General Public License for more details.
16 
17    You should have received a copy of the GNU General Public License
18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
19 
20 #include "defs.h"
21 #include "gdbcmd.h"
22 #include "regcache.h"
23 #include "gdbthread.h"
24 #include "event-top.h"
25 #include "exceptions.h"
26 #include "completer.h"
27 #include "arch-utils.h"
28 #include "gdbcore.h"
29 #include "exec.h"
30 #include "record.h"
31 #include "record-full.h"
32 #include "elf-bfd.h"
33 #include "gcore.h"
34 #include "event-loop.h"
35 #include "inf-loop.h"
36 #include "gdb_bfd.h"
37 #include "observer.h"
38 
39 #include <signal.h>
40 
41 /* This module implements "target record-full", also known as "process
42    record and replay".  This target sits on top of a "normal" target
43    (a target that "has execution"), and provides a record and replay
44    functionality, including reverse debugging.
45 
46    Target record has two modes: recording, and replaying.
47 
48    In record mode, we intercept the to_resume and to_wait methods.
49    Whenever gdb resumes the target, we run the target in single step
50    mode, and we build up an execution log in which, for each executed
51    instruction, we record all changes in memory and register state.
52    This is invisible to the user, to whom it just looks like an
53    ordinary debugging session (except for performance degredation).
54 
55    In replay mode, instead of actually letting the inferior run as a
56    process, we simulate its execution by playing back the recorded
57    execution log.  For each instruction in the log, we simulate the
58    instruction's side effects by duplicating the changes that it would
59    have made on memory and registers.  */
60 
61 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM	200000
62 
63 #define RECORD_FULL_IS_REPLAY \
64      (record_full_list->next || execution_direction == EXEC_REVERSE)
65 
66 #define RECORD_FULL_FILE_MAGIC	netorder32(0x20091016)
67 
68 /* These are the core structs of the process record functionality.
69 
70    A record_full_entry is a record of the value change of a register
71    ("record_full_reg") or a part of memory ("record_full_mem").  And each
72    instruction must have a struct record_full_entry ("record_full_end")
73    that indicates that this is the last struct record_full_entry of this
74    instruction.
75 
76    Each struct record_full_entry is linked to "record_full_list" by "prev"
77    and "next" pointers.  */
78 
79 struct record_full_mem_entry
80 {
81   CORE_ADDR addr;
82   int len;
83   /* Set this flag if target memory for this entry
84      can no longer be accessed.  */
85   int mem_entry_not_accessible;
86   union
87   {
88     gdb_byte *ptr;
89     gdb_byte buf[sizeof (gdb_byte *)];
90   } u;
91 };
92 
93 struct record_full_reg_entry
94 {
95   unsigned short num;
96   unsigned short len;
97   union
98   {
99     gdb_byte *ptr;
100     gdb_byte buf[2 * sizeof (gdb_byte *)];
101   } u;
102 };
103 
104 struct record_full_end_entry
105 {
106   enum gdb_signal sigval;
107   ULONGEST insn_num;
108 };
109 
110 enum record_full_type
111 {
112   record_full_end = 0,
113   record_full_reg,
114   record_full_mem
115 };
116 
117 /* This is the data structure that makes up the execution log.
118 
119    The execution log consists of a single linked list of entries
120    of type "struct record_full_entry".  It is doubly linked so that it
121    can be traversed in either direction.
122 
123    The start of the list is anchored by a struct called
124    "record_full_first".  The pointer "record_full_list" either points
125    to the last entry that was added to the list (in record mode), or to
126    the next entry in the list that will be executed (in replay mode).
127 
128    Each list element (struct record_full_entry), in addition to next
129    and prev pointers, consists of a union of three entry types: mem,
130    reg, and end.  A field called "type" determines which entry type is
131    represented by a given list element.
132 
133    Each instruction that is added to the execution log is represented
134    by a variable number of list elements ('entries').  The instruction
135    will have one "reg" entry for each register that is changed by
136    executing the instruction (including the PC in every case).  It
137    will also have one "mem" entry for each memory change.  Finally,
138    each instruction will have an "end" entry that separates it from
139    the changes associated with the next instruction.  */
140 
141 struct record_full_entry
142 {
143   struct record_full_entry *prev;
144   struct record_full_entry *next;
145   enum record_full_type type;
146   union
147   {
148     /* reg */
149     struct record_full_reg_entry reg;
150     /* mem */
151     struct record_full_mem_entry mem;
152     /* end */
153     struct record_full_end_entry end;
154   } u;
155 };
156 
157 /* If true, query if PREC cannot record memory
158    change of next instruction.  */
159 int record_full_memory_query = 0;
160 
161 struct record_full_core_buf_entry
162 {
163   struct record_full_core_buf_entry *prev;
164   struct target_section *p;
165   bfd_byte *buf;
166 };
167 
168 /* Record buf with core target.  */
169 static gdb_byte *record_full_core_regbuf = NULL;
170 static struct target_section *record_full_core_start;
171 static struct target_section *record_full_core_end;
172 static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
173 
174 /* The following variables are used for managing the linked list that
175    represents the execution log.
176 
177    record_full_first is the anchor that holds down the beginning of
178    the list.
179 
180    record_full_list serves two functions:
181      1) In record mode, it anchors the end of the list.
182      2) In replay mode, it traverses the list and points to
183         the next instruction that must be emulated.
184 
185    record_full_arch_list_head and record_full_arch_list_tail are used
186    to manage a separate list, which is used to build up the change
187    elements of the currently executing instruction during record mode.
188    When this instruction has been completely annotated in the "arch
189    list", it will be appended to the main execution log.  */
190 
191 static struct record_full_entry record_full_first;
192 static struct record_full_entry *record_full_list = &record_full_first;
193 static struct record_full_entry *record_full_arch_list_head = NULL;
194 static struct record_full_entry *record_full_arch_list_tail = NULL;
195 
196 /* 1 ask user. 0 auto delete the last struct record_full_entry.  */
197 static int record_full_stop_at_limit = 1;
198 /* Maximum allowed number of insns in execution log.  */
199 static unsigned int record_full_insn_max_num
200 	= DEFAULT_RECORD_FULL_INSN_MAX_NUM;
201 /* Actual count of insns presently in execution log.  */
202 static int record_full_insn_num = 0;
203 /* Count of insns logged so far (may be larger
204    than count of insns presently in execution log).  */
205 static ULONGEST record_full_insn_count;
206 
207 /* The target_ops of process record.  */
208 static struct target_ops record_full_ops;
209 static struct target_ops record_full_core_ops;
210 
211 /* Command lists for "set/show record full".  */
212 static struct cmd_list_element *set_record_full_cmdlist;
213 static struct cmd_list_element *show_record_full_cmdlist;
214 
215 /* Command list for "record full".  */
216 static struct cmd_list_element *record_full_cmdlist;
217 
218 /* The beneath function pointers.  */
219 static struct target_ops *record_full_beneath_to_resume_ops;
220 static void (*record_full_beneath_to_resume) (struct target_ops *, ptid_t, int,
221 					      enum gdb_signal);
222 static struct target_ops *record_full_beneath_to_wait_ops;
223 static ptid_t (*record_full_beneath_to_wait) (struct target_ops *, ptid_t,
224 					      struct target_waitstatus *,
225 					      int);
226 static struct target_ops *record_full_beneath_to_store_registers_ops;
227 static void (*record_full_beneath_to_store_registers) (struct target_ops *,
228 						       struct regcache *,
229 						       int regno);
230 static struct target_ops *record_full_beneath_to_xfer_partial_ops;
231 static LONGEST
232   (*record_full_beneath_to_xfer_partial) (struct target_ops *ops,
233 					  enum target_object object,
234 					  const char *annex,
235 					  gdb_byte *readbuf,
236 					  const gdb_byte *writebuf,
237 					  ULONGEST offset,
238 					  LONGEST len);
239 static int
240   (*record_full_beneath_to_insert_breakpoint) (struct gdbarch *,
241 					       struct bp_target_info *);
242 static int
243   (*record_full_beneath_to_remove_breakpoint) (struct gdbarch *,
244 					       struct bp_target_info *);
245 static int (*record_full_beneath_to_stopped_by_watchpoint) (void);
246 static int (*record_full_beneath_to_stopped_data_address) (struct target_ops *,
247 							   CORE_ADDR *);
248 static void
249   (*record_full_beneath_to_async) (void (*) (enum inferior_event_type, void *),
250 				   void *);
251 
252 static void record_full_goto_insn (struct record_full_entry *entry,
253 				   enum exec_direction_kind dir);
254 static void record_full_save (char *recfilename);
255 
256 /* Alloc and free functions for record_full_reg, record_full_mem, and
257    record_full_end entries.  */
258 
259 /* Alloc a record_full_reg record entry.  */
260 
261 static inline struct record_full_entry *
262 record_full_reg_alloc (struct regcache *regcache, int regnum)
263 {
264   struct record_full_entry *rec;
265   struct gdbarch *gdbarch = get_regcache_arch (regcache);
266 
267   rec = xcalloc (1, sizeof (struct record_full_entry));
268   rec->type = record_full_reg;
269   rec->u.reg.num = regnum;
270   rec->u.reg.len = register_size (gdbarch, regnum);
271   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
272     rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
273 
274   return rec;
275 }
276 
277 /* Free a record_full_reg record entry.  */
278 
279 static inline void
280 record_full_reg_release (struct record_full_entry *rec)
281 {
282   gdb_assert (rec->type == record_full_reg);
283   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
284     xfree (rec->u.reg.u.ptr);
285   xfree (rec);
286 }
287 
288 /* Alloc a record_full_mem record entry.  */
289 
290 static inline struct record_full_entry *
291 record_full_mem_alloc (CORE_ADDR addr, int len)
292 {
293   struct record_full_entry *rec;
294 
295   rec = xcalloc (1, sizeof (struct record_full_entry));
296   rec->type = record_full_mem;
297   rec->u.mem.addr = addr;
298   rec->u.mem.len = len;
299   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
300     rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
301 
302   return rec;
303 }
304 
305 /* Free a record_full_mem record entry.  */
306 
307 static inline void
308 record_full_mem_release (struct record_full_entry *rec)
309 {
310   gdb_assert (rec->type == record_full_mem);
311   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
312     xfree (rec->u.mem.u.ptr);
313   xfree (rec);
314 }
315 
316 /* Alloc a record_full_end record entry.  */
317 
318 static inline struct record_full_entry *
319 record_full_end_alloc (void)
320 {
321   struct record_full_entry *rec;
322 
323   rec = xcalloc (1, sizeof (struct record_full_entry));
324   rec->type = record_full_end;
325 
326   return rec;
327 }
328 
329 /* Free a record_full_end record entry.  */
330 
331 static inline void
332 record_full_end_release (struct record_full_entry *rec)
333 {
334   xfree (rec);
335 }
336 
337 /* Free one record entry, any type.
338    Return entry->type, in case caller wants to know.  */
339 
340 static inline enum record_full_type
341 record_full_entry_release (struct record_full_entry *rec)
342 {
343   enum record_full_type type = rec->type;
344 
345   switch (type) {
346   case record_full_reg:
347     record_full_reg_release (rec);
348     break;
349   case record_full_mem:
350     record_full_mem_release (rec);
351     break;
352   case record_full_end:
353     record_full_end_release (rec);
354     break;
355   }
356   return type;
357 }
358 
359 /* Free all record entries in list pointed to by REC.  */
360 
361 static void
362 record_full_list_release (struct record_full_entry *rec)
363 {
364   if (!rec)
365     return;
366 
367   while (rec->next)
368     rec = rec->next;
369 
370   while (rec->prev)
371     {
372       rec = rec->prev;
373       record_full_entry_release (rec->next);
374     }
375 
376   if (rec == &record_full_first)
377     {
378       record_full_insn_num = 0;
379       record_full_first.next = NULL;
380     }
381   else
382     record_full_entry_release (rec);
383 }
384 
385 /* Free all record entries forward of the given list position.  */
386 
387 static void
388 record_full_list_release_following (struct record_full_entry *rec)
389 {
390   struct record_full_entry *tmp = rec->next;
391 
392   rec->next = NULL;
393   while (tmp)
394     {
395       rec = tmp->next;
396       if (record_full_entry_release (tmp) == record_full_end)
397 	{
398 	  record_full_insn_num--;
399 	  record_full_insn_count--;
400 	}
401       tmp = rec;
402     }
403 }
404 
405 /* Delete the first instruction from the beginning of the log, to make
406    room for adding a new instruction at the end of the log.
407 
408    Note -- this function does not modify record_full_insn_num.  */
409 
410 static void
411 record_full_list_release_first (void)
412 {
413   struct record_full_entry *tmp;
414 
415   if (!record_full_first.next)
416     return;
417 
418   /* Loop until a record_full_end.  */
419   while (1)
420     {
421       /* Cut record_full_first.next out of the linked list.  */
422       tmp = record_full_first.next;
423       record_full_first.next = tmp->next;
424       tmp->next->prev = &record_full_first;
425 
426       /* tmp is now isolated, and can be deleted.  */
427       if (record_full_entry_release (tmp) == record_full_end)
428 	break;	/* End loop at first record_full_end.  */
429 
430       if (!record_full_first.next)
431 	{
432 	  gdb_assert (record_full_insn_num == 1);
433 	  break;	/* End loop when list is empty.  */
434 	}
435     }
436 }
437 
438 /* Add a struct record_full_entry to record_full_arch_list.  */
439 
440 static void
441 record_full_arch_list_add (struct record_full_entry *rec)
442 {
443   if (record_debug > 1)
444     fprintf_unfiltered (gdb_stdlog,
445 			"Process record: record_full_arch_list_add %s.\n",
446 			host_address_to_string (rec));
447 
448   if (record_full_arch_list_tail)
449     {
450       record_full_arch_list_tail->next = rec;
451       rec->prev = record_full_arch_list_tail;
452       record_full_arch_list_tail = rec;
453     }
454   else
455     {
456       record_full_arch_list_head = rec;
457       record_full_arch_list_tail = rec;
458     }
459 }
460 
461 /* Return the value storage location of a record entry.  */
462 static inline gdb_byte *
463 record_full_get_loc (struct record_full_entry *rec)
464 {
465   switch (rec->type) {
466   case record_full_mem:
467     if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
468       return rec->u.mem.u.ptr;
469     else
470       return rec->u.mem.u.buf;
471   case record_full_reg:
472     if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
473       return rec->u.reg.u.ptr;
474     else
475       return rec->u.reg.u.buf;
476   case record_full_end:
477   default:
478     gdb_assert_not_reached ("unexpected record_full_entry type");
479     return NULL;
480   }
481 }
482 
483 /* Record the value of a register NUM to record_full_arch_list.  */
484 
485 int
486 record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
487 {
488   struct record_full_entry *rec;
489 
490   if (record_debug > 1)
491     fprintf_unfiltered (gdb_stdlog,
492 			"Process record: add register num = %d to "
493 			"record list.\n",
494 			regnum);
495 
496   rec = record_full_reg_alloc (regcache, regnum);
497 
498   regcache_raw_read (regcache, regnum, record_full_get_loc (rec));
499 
500   record_full_arch_list_add (rec);
501 
502   return 0;
503 }
504 
505 /* Record the value of a region of memory whose address is ADDR and
506    length is LEN to record_full_arch_list.  */
507 
508 int
509 record_full_arch_list_add_mem (CORE_ADDR addr, int len)
510 {
511   struct record_full_entry *rec;
512 
513   if (record_debug > 1)
514     fprintf_unfiltered (gdb_stdlog,
515 			"Process record: add mem addr = %s len = %d to "
516 			"record list.\n",
517 			paddress (target_gdbarch (), addr), len);
518 
519   if (!addr)	/* FIXME: Why?  Some arch must permit it...  */
520     return 0;
521 
522   rec = record_full_mem_alloc (addr, len);
523 
524   if (record_read_memory (target_gdbarch (), addr,
525 			  record_full_get_loc (rec), len))
526     {
527       record_full_mem_release (rec);
528       return -1;
529     }
530 
531   record_full_arch_list_add (rec);
532 
533   return 0;
534 }
535 
536 /* Add a record_full_end type struct record_full_entry to
537    record_full_arch_list.  */
538 
539 int
540 record_full_arch_list_add_end (void)
541 {
542   struct record_full_entry *rec;
543 
544   if (record_debug > 1)
545     fprintf_unfiltered (gdb_stdlog,
546 			"Process record: add end to arch list.\n");
547 
548   rec = record_full_end_alloc ();
549   rec->u.end.sigval = GDB_SIGNAL_0;
550   rec->u.end.insn_num = ++record_full_insn_count;
551 
552   record_full_arch_list_add (rec);
553 
554   return 0;
555 }
556 
557 static void
558 record_full_check_insn_num (int set_terminal)
559 {
560   if (record_full_insn_max_num)
561     {
562       gdb_assert (record_full_insn_num <= record_full_insn_max_num);
563       if (record_full_insn_num == record_full_insn_max_num)
564 	{
565 	  /* Ask user what to do.  */
566 	  if (record_full_stop_at_limit)
567 	    {
568 	      int q;
569 
570 	      if (set_terminal)
571 		target_terminal_ours ();
572 	      q = yquery (_("Do you want to auto delete previous execution "
573 			    "log entries when record/replay buffer becomes "
574 			    "full (record full stop-at-limit)?"));
575 	      if (set_terminal)
576 		target_terminal_inferior ();
577 	      if (q)
578 		record_full_stop_at_limit = 0;
579 	      else
580 		error (_("Process record: stopped by user."));
581 	    }
582 	}
583     }
584 }
585 
586 static void
587 record_full_arch_list_cleanups (void *ignore)
588 {
589   record_full_list_release (record_full_arch_list_tail);
590 }
591 
592 /* Before inferior step (when GDB record the running message, inferior
593    only can step), GDB will call this function to record the values to
594    record_full_list.  This function will call gdbarch_process_record to
595    record the running message of inferior and set them to
596    record_full_arch_list, and add it to record_full_list.  */
597 
598 static int
599 record_full_message (struct regcache *regcache, enum gdb_signal signal)
600 {
601   int ret;
602   struct gdbarch *gdbarch = get_regcache_arch (regcache);
603   struct cleanup *old_cleanups
604     = make_cleanup (record_full_arch_list_cleanups, 0);
605 
606   record_full_arch_list_head = NULL;
607   record_full_arch_list_tail = NULL;
608 
609   /* Check record_full_insn_num.  */
610   record_full_check_insn_num (1);
611 
612   /* If gdb sends a signal value to target_resume,
613      save it in the 'end' field of the previous instruction.
614 
615      Maybe process record should record what really happened,
616      rather than what gdb pretends has happened.
617 
618      So if Linux delivered the signal to the child process during
619      the record mode, we will record it and deliver it again in
620      the replay mode.
621 
622      If user says "ignore this signal" during the record mode, then
623      it will be ignored again during the replay mode (no matter if
624      the user says something different, like "deliver this signal"
625      during the replay mode).
626 
627      User should understand that nothing he does during the replay
628      mode will change the behavior of the child.  If he tries,
629      then that is a user error.
630 
631      But we should still deliver the signal to gdb during the replay,
632      if we delivered it during the recording.  Therefore we should
633      record the signal during record_full_wait, not
634      record_full_resume.  */
635   if (record_full_list != &record_full_first)  /* FIXME better way to check */
636     {
637       gdb_assert (record_full_list->type == record_full_end);
638       record_full_list->u.end.sigval = signal;
639     }
640 
641   if (signal == GDB_SIGNAL_0
642       || !gdbarch_process_record_signal_p (gdbarch))
643     ret = gdbarch_process_record (gdbarch,
644 				  regcache,
645 				  regcache_read_pc (regcache));
646   else
647     ret = gdbarch_process_record_signal (gdbarch,
648 					 regcache,
649 					 signal);
650 
651   if (ret > 0)
652     error (_("Process record: inferior program stopped."));
653   if (ret < 0)
654     error (_("Process record: failed to record execution log."));
655 
656   discard_cleanups (old_cleanups);
657 
658   record_full_list->next = record_full_arch_list_head;
659   record_full_arch_list_head->prev = record_full_list;
660   record_full_list = record_full_arch_list_tail;
661 
662   if (record_full_insn_num == record_full_insn_max_num
663       && record_full_insn_max_num)
664     record_full_list_release_first ();
665   else
666     record_full_insn_num++;
667 
668   return 1;
669 }
670 
671 struct record_full_message_args {
672   struct regcache *regcache;
673   enum gdb_signal signal;
674 };
675 
676 static int
677 record_full_message_wrapper (void *args)
678 {
679   struct record_full_message_args *record_full_args = args;
680 
681   return record_full_message (record_full_args->regcache,
682 			      record_full_args->signal);
683 }
684 
685 static int
686 record_full_message_wrapper_safe (struct regcache *regcache,
687 				  enum gdb_signal signal)
688 {
689   struct record_full_message_args args;
690 
691   args.regcache = regcache;
692   args.signal = signal;
693 
694   return catch_errors (record_full_message_wrapper, &args, NULL,
695 		       RETURN_MASK_ALL);
696 }
697 
698 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
699    doesn't need record.  */
700 
701 static int record_full_gdb_operation_disable = 0;
702 
703 struct cleanup *
704 record_full_gdb_operation_disable_set (void)
705 {
706   struct cleanup *old_cleanups = NULL;
707 
708   old_cleanups =
709     make_cleanup_restore_integer (&record_full_gdb_operation_disable);
710   record_full_gdb_operation_disable = 1;
711 
712   return old_cleanups;
713 }
714 
715 /* Flag set to TRUE for target_stopped_by_watchpoint.  */
716 static int record_full_hw_watchpoint = 0;
717 
718 /* Execute one instruction from the record log.  Each instruction in
719    the log will be represented by an arbitrary sequence of register
720    entries and memory entries, followed by an 'end' entry.  */
721 
722 static inline void
723 record_full_exec_insn (struct regcache *regcache,
724 		       struct gdbarch *gdbarch,
725 		       struct record_full_entry *entry)
726 {
727   switch (entry->type)
728     {
729     case record_full_reg: /* reg */
730       {
731         gdb_byte reg[MAX_REGISTER_SIZE];
732 
733         if (record_debug > 1)
734           fprintf_unfiltered (gdb_stdlog,
735                               "Process record: record_full_reg %s to "
736                               "inferior num = %d.\n",
737                               host_address_to_string (entry),
738                               entry->u.reg.num);
739 
740         regcache_cooked_read (regcache, entry->u.reg.num, reg);
741         regcache_cooked_write (regcache, entry->u.reg.num,
742 			       record_full_get_loc (entry));
743         memcpy (record_full_get_loc (entry), reg, entry->u.reg.len);
744       }
745       break;
746 
747     case record_full_mem: /* mem */
748       {
749 	/* Nothing to do if the entry is flagged not_accessible.  */
750         if (!entry->u.mem.mem_entry_not_accessible)
751           {
752             gdb_byte *mem = alloca (entry->u.mem.len);
753 
754             if (record_debug > 1)
755               fprintf_unfiltered (gdb_stdlog,
756                                   "Process record: record_full_mem %s to "
757                                   "inferior addr = %s len = %d.\n",
758                                   host_address_to_string (entry),
759                                   paddress (gdbarch, entry->u.mem.addr),
760                                   entry->u.mem.len);
761 
762             if (record_read_memory (gdbarch,
763 				    entry->u.mem.addr, mem, entry->u.mem.len))
764 	      entry->u.mem.mem_entry_not_accessible = 1;
765             else
766               {
767                 if (target_write_memory (entry->u.mem.addr,
768 					 record_full_get_loc (entry),
769 					 entry->u.mem.len))
770                   {
771                     entry->u.mem.mem_entry_not_accessible = 1;
772                     if (record_debug)
773                       warning (_("Process record: error writing memory at "
774 				 "addr = %s len = %d."),
775                                paddress (gdbarch, entry->u.mem.addr),
776                                entry->u.mem.len);
777                   }
778                 else
779 		  {
780 		    memcpy (record_full_get_loc (entry), mem,
781 			    entry->u.mem.len);
782 
783 		    /* We've changed memory --- check if a hardware
784 		       watchpoint should trap.  Note that this
785 		       presently assumes the target beneath supports
786 		       continuable watchpoints.  On non-continuable
787 		       watchpoints target, we'll want to check this
788 		       _before_ actually doing the memory change, and
789 		       not doing the change at all if the watchpoint
790 		       traps.  */
791 		    if (hardware_watchpoint_inserted_in_range
792 			(get_regcache_aspace (regcache),
793 			 entry->u.mem.addr, entry->u.mem.len))
794 		      record_full_hw_watchpoint = 1;
795 		  }
796               }
797           }
798       }
799       break;
800     }
801 }
802 
803 static struct target_ops *tmp_to_resume_ops;
804 static void (*tmp_to_resume) (struct target_ops *, ptid_t, int,
805 			      enum gdb_signal);
806 static struct target_ops *tmp_to_wait_ops;
807 static ptid_t (*tmp_to_wait) (struct target_ops *, ptid_t,
808 			      struct target_waitstatus *,
809 			      int);
810 static struct target_ops *tmp_to_store_registers_ops;
811 static void (*tmp_to_store_registers) (struct target_ops *,
812 				       struct regcache *,
813 				       int regno);
814 static struct target_ops *tmp_to_xfer_partial_ops;
815 static LONGEST (*tmp_to_xfer_partial) (struct target_ops *ops,
816 				       enum target_object object,
817 				       const char *annex,
818 				       gdb_byte *readbuf,
819 				       const gdb_byte *writebuf,
820 				       ULONGEST offset,
821 				       LONGEST len);
822 static int (*tmp_to_insert_breakpoint) (struct gdbarch *,
823 					struct bp_target_info *);
824 static int (*tmp_to_remove_breakpoint) (struct gdbarch *,
825 					struct bp_target_info *);
826 static int (*tmp_to_stopped_by_watchpoint) (void);
827 static int (*tmp_to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
828 static int (*tmp_to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
829 static void (*tmp_to_async) (void (*) (enum inferior_event_type, void *), void *);
830 
831 static void record_full_restore (void);
832 
833 /* Asynchronous signal handle registered as event loop source for when
834    we have pending events ready to be passed to the core.  */
835 
836 static struct async_event_handler *record_full_async_inferior_event_token;
837 
838 static void
839 record_full_async_inferior_event_handler (gdb_client_data data)
840 {
841   inferior_event_handler (INF_REG_EVENT, NULL);
842 }
843 
844 /* Open the process record target.  */
845 
846 static void
847 record_full_core_open_1 (char *name, int from_tty)
848 {
849   struct regcache *regcache = get_current_regcache ();
850   int regnum = gdbarch_num_regs (get_regcache_arch (regcache));
851   int i;
852 
853   /* Get record_full_core_regbuf.  */
854   target_fetch_registers (regcache, -1);
855   record_full_core_regbuf = xmalloc (MAX_REGISTER_SIZE * regnum);
856   for (i = 0; i < regnum; i ++)
857     regcache_raw_collect (regcache, i,
858 			  record_full_core_regbuf + MAX_REGISTER_SIZE * i);
859 
860   /* Get record_full_core_start and record_full_core_end.  */
861   if (build_section_table (core_bfd, &record_full_core_start,
862 			   &record_full_core_end))
863     {
864       xfree (record_full_core_regbuf);
865       record_full_core_regbuf = NULL;
866       error (_("\"%s\": Can't find sections: %s"),
867 	     bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
868     }
869 
870   push_target (&record_full_core_ops);
871   record_full_restore ();
872 }
873 
874 /* "to_open" target method for 'live' processes.  */
875 
876 static void
877 record_full_open_1 (char *name, int from_tty)
878 {
879   if (record_debug)
880     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
881 
882   /* check exec */
883   if (!target_has_execution)
884     error (_("Process record: the program is not being run."));
885   if (non_stop)
886     error (_("Process record target can't debug inferior in non-stop mode "
887 	     "(non-stop)."));
888 
889   if (!gdbarch_process_record_p (target_gdbarch ()))
890     error (_("Process record: the current architecture doesn't support "
891 	     "record function."));
892 
893   if (!tmp_to_resume)
894     error (_("Could not find 'to_resume' method on the target stack."));
895   if (!tmp_to_wait)
896     error (_("Could not find 'to_wait' method on the target stack."));
897   if (!tmp_to_store_registers)
898     error (_("Could not find 'to_store_registers' "
899 	     "method on the target stack."));
900   if (!tmp_to_insert_breakpoint)
901     error (_("Could not find 'to_insert_breakpoint' "
902 	     "method on the target stack."));
903   if (!tmp_to_remove_breakpoint)
904     error (_("Could not find 'to_remove_breakpoint' "
905 	     "method on the target stack."));
906   if (!tmp_to_stopped_by_watchpoint)
907     error (_("Could not find 'to_stopped_by_watchpoint' "
908 	     "method on the target stack."));
909   if (!tmp_to_stopped_data_address)
910     error (_("Could not find 'to_stopped_data_address' "
911 	     "method on the target stack."));
912 
913   push_target (&record_full_ops);
914 }
915 
916 static void record_full_init_record_breakpoints (void);
917 
918 /* "to_open" target method.  Open the process record target.  */
919 
920 static void
921 record_full_open (char *name, int from_tty)
922 {
923   struct target_ops *t;
924 
925   if (record_debug)
926     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
927 
928   /* Check if record target is already running.  */
929   if (current_target.to_stratum == record_stratum)
930     error (_("Process record target already running.  Use \"record stop\" to "
931              "stop record target first."));
932 
933   /* Reset the tmp beneath pointers.  */
934   tmp_to_resume_ops = NULL;
935   tmp_to_resume = NULL;
936   tmp_to_wait_ops = NULL;
937   tmp_to_wait = NULL;
938   tmp_to_store_registers_ops = NULL;
939   tmp_to_store_registers = NULL;
940   tmp_to_xfer_partial_ops = NULL;
941   tmp_to_xfer_partial = NULL;
942   tmp_to_insert_breakpoint = NULL;
943   tmp_to_remove_breakpoint = NULL;
944   tmp_to_stopped_by_watchpoint = NULL;
945   tmp_to_stopped_data_address = NULL;
946   tmp_to_async = NULL;
947 
948   /* Set the beneath function pointers.  */
949   for (t = current_target.beneath; t != NULL; t = t->beneath)
950     {
951       if (!tmp_to_resume)
952         {
953 	  tmp_to_resume = t->to_resume;
954 	  tmp_to_resume_ops = t;
955         }
956       if (!tmp_to_wait)
957         {
958 	  tmp_to_wait = t->to_wait;
959 	  tmp_to_wait_ops = t;
960         }
961       if (!tmp_to_store_registers)
962         {
963 	  tmp_to_store_registers = t->to_store_registers;
964 	  tmp_to_store_registers_ops = t;
965         }
966       if (!tmp_to_xfer_partial)
967         {
968 	  tmp_to_xfer_partial = t->to_xfer_partial;
969 	  tmp_to_xfer_partial_ops = t;
970         }
971       if (!tmp_to_insert_breakpoint)
972 	tmp_to_insert_breakpoint = t->to_insert_breakpoint;
973       if (!tmp_to_remove_breakpoint)
974 	tmp_to_remove_breakpoint = t->to_remove_breakpoint;
975       if (!tmp_to_stopped_by_watchpoint)
976 	tmp_to_stopped_by_watchpoint = t->to_stopped_by_watchpoint;
977       if (!tmp_to_stopped_data_address)
978 	tmp_to_stopped_data_address = t->to_stopped_data_address;
979       if (!tmp_to_async)
980 	tmp_to_async = t->to_async;
981     }
982   if (!tmp_to_xfer_partial)
983     error (_("Could not find 'to_xfer_partial' method on the target stack."));
984 
985   /* Reset */
986   record_full_insn_num = 0;
987   record_full_insn_count = 0;
988   record_full_list = &record_full_first;
989   record_full_list->next = NULL;
990 
991   /* Set the tmp beneath pointers to beneath pointers.  */
992   record_full_beneath_to_resume_ops = tmp_to_resume_ops;
993   record_full_beneath_to_resume = tmp_to_resume;
994   record_full_beneath_to_wait_ops = tmp_to_wait_ops;
995   record_full_beneath_to_wait = tmp_to_wait;
996   record_full_beneath_to_store_registers_ops = tmp_to_store_registers_ops;
997   record_full_beneath_to_store_registers = tmp_to_store_registers;
998   record_full_beneath_to_xfer_partial_ops = tmp_to_xfer_partial_ops;
999   record_full_beneath_to_xfer_partial = tmp_to_xfer_partial;
1000   record_full_beneath_to_insert_breakpoint = tmp_to_insert_breakpoint;
1001   record_full_beneath_to_remove_breakpoint = tmp_to_remove_breakpoint;
1002   record_full_beneath_to_stopped_by_watchpoint = tmp_to_stopped_by_watchpoint;
1003   record_full_beneath_to_stopped_data_address = tmp_to_stopped_data_address;
1004   record_full_beneath_to_async = tmp_to_async;
1005 
1006   if (core_bfd)
1007     record_full_core_open_1 (name, from_tty);
1008   else
1009     record_full_open_1 (name, from_tty);
1010 
1011   /* Register extra event sources in the event loop.  */
1012   record_full_async_inferior_event_token
1013     = create_async_event_handler (record_full_async_inferior_event_handler,
1014 				  NULL);
1015 
1016   record_full_init_record_breakpoints ();
1017 
1018   observer_notify_record_changed (current_inferior (),  1);
1019 }
1020 
1021 /* "to_close" target method.  Close the process record target.  */
1022 
1023 static void
1024 record_full_close (int quitting)
1025 {
1026   struct record_full_core_buf_entry *entry;
1027 
1028   if (record_debug)
1029     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n");
1030 
1031   record_full_list_release (record_full_list);
1032 
1033   /* Release record_full_core_regbuf.  */
1034   if (record_full_core_regbuf)
1035     {
1036       xfree (record_full_core_regbuf);
1037       record_full_core_regbuf = NULL;
1038     }
1039 
1040   /* Release record_full_core_buf_list.  */
1041   if (record_full_core_buf_list)
1042     {
1043       for (entry = record_full_core_buf_list->prev; entry;
1044 	   entry = entry->prev)
1045 	{
1046 	  xfree (record_full_core_buf_list);
1047 	  record_full_core_buf_list = entry;
1048 	}
1049       record_full_core_buf_list = NULL;
1050     }
1051 
1052   if (record_full_async_inferior_event_token)
1053     delete_async_event_handler (&record_full_async_inferior_event_token);
1054 }
1055 
1056 static int record_full_resume_step = 0;
1057 
1058 /* True if we've been resumed, and so each record_full_wait call should
1059    advance execution.  If this is false, record_full_wait will return a
1060    TARGET_WAITKIND_IGNORE.  */
1061 static int record_full_resumed = 0;
1062 
1063 /* The execution direction of the last resume we got.  This is
1064    necessary for async mode.  Vis (order is not strictly accurate):
1065 
1066    1. user has the global execution direction set to forward
1067    2. user does a reverse-step command
1068    3. record_full_resume is called with global execution direction
1069       temporarily switched to reverse
1070    4. GDB's execution direction is reverted back to forward
1071    5. target record notifies event loop there's an event to handle
1072    6. infrun asks the target which direction was it going, and switches
1073       the global execution direction accordingly (to reverse)
1074    7. infrun polls an event out of the record target, and handles it
1075    8. GDB goes back to the event loop, and goto #4.
1076 */
1077 static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD;
1078 
1079 /* "to_resume" target method.  Resume the process record target.  */
1080 
1081 static void
1082 record_full_resume (struct target_ops *ops, ptid_t ptid, int step,
1083 		    enum gdb_signal signal)
1084 {
1085   record_full_resume_step = step;
1086   record_full_resumed = 1;
1087   record_full_execution_dir = execution_direction;
1088 
1089   if (!RECORD_FULL_IS_REPLAY)
1090     {
1091       struct gdbarch *gdbarch = target_thread_architecture (ptid);
1092 
1093       record_full_message (get_current_regcache (), signal);
1094 
1095       if (!step)
1096         {
1097           /* This is not hard single step.  */
1098           if (!gdbarch_software_single_step_p (gdbarch))
1099             {
1100               /* This is a normal continue.  */
1101               step = 1;
1102             }
1103           else
1104             {
1105               /* This arch support soft sigle step.  */
1106               if (single_step_breakpoints_inserted ())
1107                 {
1108                   /* This is a soft single step.  */
1109                   record_full_resume_step = 1;
1110                 }
1111               else
1112                 {
1113                   /* This is a continue.
1114                      Try to insert a soft single step breakpoint.  */
1115                   if (!gdbarch_software_single_step (gdbarch,
1116                                                      get_current_frame ()))
1117                     {
1118                       /* This system don't want use soft single step.
1119                          Use hard sigle step.  */
1120                       step = 1;
1121                     }
1122                 }
1123             }
1124         }
1125 
1126       /* Make sure the target beneath reports all signals.  */
1127       target_pass_signals (0, NULL);
1128 
1129       record_full_beneath_to_resume (record_full_beneath_to_resume_ops,
1130 				     ptid, step, signal);
1131     }
1132 
1133   /* We are about to start executing the inferior (or simulate it),
1134      let's register it with the event loop.  */
1135   if (target_can_async_p ())
1136     {
1137       target_async (inferior_event_handler, 0);
1138       /* Notify the event loop there's an event to wait for.  We do
1139 	 most of the work in record_full_wait.  */
1140       mark_async_event_handler (record_full_async_inferior_event_token);
1141     }
1142 }
1143 
1144 static int record_full_get_sig = 0;
1145 
1146 /* SIGINT signal handler, registered by "to_wait" method.  */
1147 
1148 static void
1149 record_full_sig_handler (int signo)
1150 {
1151   if (record_debug)
1152     fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n");
1153 
1154   /* It will break the running inferior in replay mode.  */
1155   record_full_resume_step = 1;
1156 
1157   /* It will let record_full_wait set inferior status to get the signal
1158      SIGINT.  */
1159   record_full_get_sig = 1;
1160 }
1161 
1162 static void
1163 record_full_wait_cleanups (void *ignore)
1164 {
1165   if (execution_direction == EXEC_REVERSE)
1166     {
1167       if (record_full_list->next)
1168 	record_full_list = record_full_list->next;
1169     }
1170   else
1171     record_full_list = record_full_list->prev;
1172 }
1173 
1174 /* "to_wait" target method for process record target.
1175 
1176    In record mode, the target is always run in singlestep mode
1177    (even when gdb says to continue).  The to_wait method intercepts
1178    the stop events and determines which ones are to be passed on to
1179    gdb.  Most stop events are just singlestep events that gdb is not
1180    to know about, so the to_wait method just records them and keeps
1181    singlestepping.
1182 
1183    In replay mode, this function emulates the recorded execution log,
1184    one instruction at a time (forward or backward), and determines
1185    where to stop.  */
1186 
1187 static ptid_t
1188 record_full_wait_1 (struct target_ops *ops,
1189 		    ptid_t ptid, struct target_waitstatus *status,
1190 		    int options)
1191 {
1192   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
1193 
1194   if (record_debug)
1195     fprintf_unfiltered (gdb_stdlog,
1196 			"Process record: record_full_wait "
1197 			"record_full_resume_step = %d, "
1198 			"record_full_resumed = %d, direction=%s\n",
1199 			record_full_resume_step, record_full_resumed,
1200 			record_full_execution_dir == EXEC_FORWARD
1201 			? "forward" : "reverse");
1202 
1203   if (!record_full_resumed)
1204     {
1205       gdb_assert ((options & TARGET_WNOHANG) != 0);
1206 
1207       /* No interesting event.  */
1208       status->kind = TARGET_WAITKIND_IGNORE;
1209       return minus_one_ptid;
1210     }
1211 
1212   record_full_get_sig = 0;
1213   signal (SIGINT, record_full_sig_handler);
1214 
1215   if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops)
1216     {
1217       if (record_full_resume_step)
1218 	{
1219 	  /* This is a single step.  */
1220 	  return record_full_beneath_to_wait (record_full_beneath_to_wait_ops,
1221 					      ptid, status, options);
1222 	}
1223       else
1224 	{
1225 	  /* This is not a single step.  */
1226 	  ptid_t ret;
1227 	  CORE_ADDR tmp_pc;
1228 	  struct gdbarch *gdbarch = target_thread_architecture (inferior_ptid);
1229 
1230 	  while (1)
1231 	    {
1232 	      ret = record_full_beneath_to_wait
1233 		(record_full_beneath_to_wait_ops, ptid, status, options);
1234 	      if (status->kind == TARGET_WAITKIND_IGNORE)
1235 		{
1236 		  if (record_debug)
1237 		    fprintf_unfiltered (gdb_stdlog,
1238 					"Process record: record_full_wait "
1239 					"target beneath not done yet\n");
1240 		  return ret;
1241 		}
1242 
1243               if (single_step_breakpoints_inserted ())
1244                 remove_single_step_breakpoints ();
1245 
1246 	      if (record_full_resume_step)
1247 		return ret;
1248 
1249 	      /* Is this a SIGTRAP?  */
1250 	      if (status->kind == TARGET_WAITKIND_STOPPED
1251 		  && status->value.sig == GDB_SIGNAL_TRAP)
1252 		{
1253 		  struct regcache *regcache;
1254 		  struct address_space *aspace;
1255 
1256 		  /* Yes -- this is likely our single-step finishing,
1257 		     but check if there's any reason the core would be
1258 		     interested in the event.  */
1259 
1260 		  registers_changed ();
1261 		  regcache = get_current_regcache ();
1262 		  tmp_pc = regcache_read_pc (regcache);
1263 		  aspace = get_regcache_aspace (regcache);
1264 
1265 		  if (target_stopped_by_watchpoint ())
1266 		    {
1267 		      /* Always interested in watchpoints.  */
1268 		    }
1269 		  else if (breakpoint_inserted_here_p (aspace, tmp_pc))
1270 		    {
1271 		      /* There is a breakpoint here.  Let the core
1272 			 handle it.  */
1273 		      if (software_breakpoint_inserted_here_p (aspace, tmp_pc))
1274 			{
1275 			  struct gdbarch *gdbarch
1276 			    = get_regcache_arch (regcache);
1277 			  CORE_ADDR decr_pc_after_break
1278 			    = gdbarch_decr_pc_after_break (gdbarch);
1279 			  if (decr_pc_after_break)
1280 			    regcache_write_pc (regcache,
1281 					       tmp_pc + decr_pc_after_break);
1282 			}
1283 		    }
1284 		  else
1285 		    {
1286 		      /* This is a single-step trap.  Record the
1287 		         insn and issue another step.
1288                          FIXME: this part can be a random SIGTRAP too.
1289                          But GDB cannot handle it.  */
1290                       int step = 1;
1291 
1292 		      if (!record_full_message_wrapper_safe (regcache,
1293 							     GDB_SIGNAL_0))
1294   			{
1295                            status->kind = TARGET_WAITKIND_STOPPED;
1296                            status->value.sig = GDB_SIGNAL_0;
1297                            break;
1298   			}
1299 
1300                       if (gdbarch_software_single_step_p (gdbarch))
1301 			{
1302 			  /* Try to insert the software single step breakpoint.
1303 			     If insert success, set step to 0.  */
1304 			  set_executing (inferior_ptid, 0);
1305 			  reinit_frame_cache ();
1306 			  if (gdbarch_software_single_step (gdbarch,
1307                                                             get_current_frame ()))
1308 			    step = 0;
1309 			  set_executing (inferior_ptid, 1);
1310 			}
1311 
1312 		      if (record_debug)
1313 			fprintf_unfiltered (gdb_stdlog,
1314 					    "Process record: record_full_wait "
1315 					    "issuing one more step in the "
1316 					    "target beneath\n");
1317 		      record_full_beneath_to_resume
1318 			(record_full_beneath_to_resume_ops, ptid, step,
1319 			 GDB_SIGNAL_0);
1320 		      continue;
1321 		    }
1322 		}
1323 
1324 	      /* The inferior is broken by a breakpoint or a signal.  */
1325 	      break;
1326 	    }
1327 
1328 	  return ret;
1329 	}
1330     }
1331   else
1332     {
1333       struct regcache *regcache = get_current_regcache ();
1334       struct gdbarch *gdbarch = get_regcache_arch (regcache);
1335       struct address_space *aspace = get_regcache_aspace (regcache);
1336       int continue_flag = 1;
1337       int first_record_full_end = 1;
1338       struct cleanup *old_cleanups
1339 	= make_cleanup (record_full_wait_cleanups, 0);
1340       CORE_ADDR tmp_pc;
1341 
1342       record_full_hw_watchpoint = 0;
1343       status->kind = TARGET_WAITKIND_STOPPED;
1344 
1345       /* Check breakpoint when forward execute.  */
1346       if (execution_direction == EXEC_FORWARD)
1347 	{
1348 	  tmp_pc = regcache_read_pc (regcache);
1349 	  if (breakpoint_inserted_here_p (aspace, tmp_pc))
1350 	    {
1351 	      int decr_pc_after_break = gdbarch_decr_pc_after_break (gdbarch);
1352 
1353 	      if (record_debug)
1354 		fprintf_unfiltered (gdb_stdlog,
1355 				    "Process record: break at %s.\n",
1356 				    paddress (gdbarch, tmp_pc));
1357 
1358 	      if (decr_pc_after_break
1359 		  && !record_full_resume_step
1360 		  && software_breakpoint_inserted_here_p (aspace, tmp_pc))
1361 		regcache_write_pc (regcache,
1362 				   tmp_pc + decr_pc_after_break);
1363 	      goto replay_out;
1364 	    }
1365 	}
1366 
1367       /* If GDB is in terminal_inferior mode, it will not get the signal.
1368          And in GDB replay mode, GDB doesn't need to be in terminal_inferior
1369          mode, because inferior will not executed.
1370          Then set it to terminal_ours to make GDB get the signal.  */
1371       target_terminal_ours ();
1372 
1373       /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
1374          instruction.  */
1375       if (execution_direction == EXEC_FORWARD && record_full_list->next)
1376 	record_full_list = record_full_list->next;
1377 
1378       /* Loop over the record_full_list, looking for the next place to
1379 	 stop.  */
1380       do
1381 	{
1382 	  /* Check for beginning and end of log.  */
1383 	  if (execution_direction == EXEC_REVERSE
1384 	      && record_full_list == &record_full_first)
1385 	    {
1386 	      /* Hit beginning of record log in reverse.  */
1387 	      status->kind = TARGET_WAITKIND_NO_HISTORY;
1388 	      break;
1389 	    }
1390 	  if (execution_direction != EXEC_REVERSE && !record_full_list->next)
1391 	    {
1392 	      /* Hit end of record log going forward.  */
1393 	      status->kind = TARGET_WAITKIND_NO_HISTORY;
1394 	      break;
1395 	    }
1396 
1397           record_full_exec_insn (regcache, gdbarch, record_full_list);
1398 
1399 	  if (record_full_list->type == record_full_end)
1400 	    {
1401 	      if (record_debug > 1)
1402 		fprintf_unfiltered (gdb_stdlog,
1403 				    "Process record: record_full_end %s to "
1404 				    "inferior.\n",
1405 				    host_address_to_string (record_full_list));
1406 
1407 	      if (first_record_full_end && execution_direction == EXEC_REVERSE)
1408 		{
1409 		  /* When reverse excute, the first record_full_end is the
1410 		     part of current instruction.  */
1411 		  first_record_full_end = 0;
1412 		}
1413 	      else
1414 		{
1415 		  /* In EXEC_REVERSE mode, this is the record_full_end of prev
1416 		     instruction.
1417 		     In EXEC_FORWARD mode, this is the record_full_end of
1418 		     current instruction.  */
1419 		  /* step */
1420 		  if (record_full_resume_step)
1421 		    {
1422 		      if (record_debug > 1)
1423 			fprintf_unfiltered (gdb_stdlog,
1424 					    "Process record: step.\n");
1425 		      continue_flag = 0;
1426 		    }
1427 
1428 		  /* check breakpoint */
1429 		  tmp_pc = regcache_read_pc (regcache);
1430 		  if (breakpoint_inserted_here_p (aspace, tmp_pc))
1431 		    {
1432 		      int decr_pc_after_break
1433 			= gdbarch_decr_pc_after_break (gdbarch);
1434 
1435 		      if (record_debug)
1436 			fprintf_unfiltered (gdb_stdlog,
1437 					    "Process record: break "
1438 					    "at %s.\n",
1439 					    paddress (gdbarch, tmp_pc));
1440 		      if (decr_pc_after_break
1441 			  && execution_direction == EXEC_FORWARD
1442 			  && !record_full_resume_step
1443 			  && software_breakpoint_inserted_here_p (aspace,
1444 								  tmp_pc))
1445 			regcache_write_pc (regcache,
1446 					   tmp_pc + decr_pc_after_break);
1447 		      continue_flag = 0;
1448 		    }
1449 
1450 		  if (record_full_hw_watchpoint)
1451 		    {
1452 		      if (record_debug)
1453 			fprintf_unfiltered (gdb_stdlog,
1454 					    "Process record: hit hw "
1455 					    "watchpoint.\n");
1456 		      continue_flag = 0;
1457 		    }
1458 		  /* Check target signal */
1459 		  if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1460 		    /* FIXME: better way to check */
1461 		    continue_flag = 0;
1462 		}
1463 	    }
1464 
1465 	  if (continue_flag)
1466 	    {
1467 	      if (execution_direction == EXEC_REVERSE)
1468 		{
1469 		  if (record_full_list->prev)
1470 		    record_full_list = record_full_list->prev;
1471 		}
1472 	      else
1473 		{
1474 		  if (record_full_list->next)
1475 		    record_full_list = record_full_list->next;
1476 		}
1477 	    }
1478 	}
1479       while (continue_flag);
1480 
1481 replay_out:
1482       if (record_full_get_sig)
1483 	status->value.sig = GDB_SIGNAL_INT;
1484       else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1485 	/* FIXME: better way to check */
1486 	status->value.sig = record_full_list->u.end.sigval;
1487       else
1488 	status->value.sig = GDB_SIGNAL_TRAP;
1489 
1490       discard_cleanups (old_cleanups);
1491     }
1492 
1493   signal (SIGINT, handle_sigint);
1494 
1495   do_cleanups (set_cleanups);
1496   return inferior_ptid;
1497 }
1498 
1499 static ptid_t
1500 record_full_wait (struct target_ops *ops,
1501 		  ptid_t ptid, struct target_waitstatus *status,
1502 		  int options)
1503 {
1504   ptid_t return_ptid;
1505 
1506   return_ptid = record_full_wait_1 (ops, ptid, status, options);
1507   if (status->kind != TARGET_WAITKIND_IGNORE)
1508     {
1509       /* We're reporting a stop.  Make sure any spurious
1510 	 target_wait(WNOHANG) doesn't advance the target until the
1511 	 core wants us resumed again.  */
1512       record_full_resumed = 0;
1513     }
1514   return return_ptid;
1515 }
1516 
1517 static int
1518 record_full_stopped_by_watchpoint (void)
1519 {
1520   if (RECORD_FULL_IS_REPLAY)
1521     return record_full_hw_watchpoint;
1522   else
1523     return record_full_beneath_to_stopped_by_watchpoint ();
1524 }
1525 
1526 static int
1527 record_full_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
1528 {
1529   if (RECORD_FULL_IS_REPLAY)
1530     return 0;
1531   else
1532     return record_full_beneath_to_stopped_data_address (ops, addr_p);
1533 }
1534 
1535 /* Record registers change (by user or by GDB) to list as an instruction.  */
1536 
1537 static void
1538 record_full_registers_change (struct regcache *regcache, int regnum)
1539 {
1540   /* Check record_full_insn_num.  */
1541   record_full_check_insn_num (0);
1542 
1543   record_full_arch_list_head = NULL;
1544   record_full_arch_list_tail = NULL;
1545 
1546   if (regnum < 0)
1547     {
1548       int i;
1549 
1550       for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
1551 	{
1552 	  if (record_full_arch_list_add_reg (regcache, i))
1553 	    {
1554 	      record_full_list_release (record_full_arch_list_tail);
1555 	      error (_("Process record: failed to record execution log."));
1556 	    }
1557 	}
1558     }
1559   else
1560     {
1561       if (record_full_arch_list_add_reg (regcache, regnum))
1562 	{
1563 	  record_full_list_release (record_full_arch_list_tail);
1564 	  error (_("Process record: failed to record execution log."));
1565 	}
1566     }
1567   if (record_full_arch_list_add_end ())
1568     {
1569       record_full_list_release (record_full_arch_list_tail);
1570       error (_("Process record: failed to record execution log."));
1571     }
1572   record_full_list->next = record_full_arch_list_head;
1573   record_full_arch_list_head->prev = record_full_list;
1574   record_full_list = record_full_arch_list_tail;
1575 
1576   if (record_full_insn_num == record_full_insn_max_num
1577       && record_full_insn_max_num)
1578     record_full_list_release_first ();
1579   else
1580     record_full_insn_num++;
1581 }
1582 
1583 /* "to_store_registers" method for process record target.  */
1584 
1585 static void
1586 record_full_store_registers (struct target_ops *ops,
1587 			     struct regcache *regcache,
1588 			     int regno)
1589 {
1590   if (!record_full_gdb_operation_disable)
1591     {
1592       if (RECORD_FULL_IS_REPLAY)
1593 	{
1594 	  int n;
1595 
1596 	  /* Let user choose if he wants to write register or not.  */
1597 	  if (regno < 0)
1598 	    n =
1599 	      query (_("Because GDB is in replay mode, changing the "
1600 		       "value of a register will make the execution "
1601 		       "log unusable from this point onward.  "
1602 		       "Change all registers?"));
1603 	  else
1604 	    n =
1605 	      query (_("Because GDB is in replay mode, changing the value "
1606 		       "of a register will make the execution log unusable "
1607 		       "from this point onward.  Change register %s?"),
1608 		      gdbarch_register_name (get_regcache_arch (regcache),
1609 					       regno));
1610 
1611 	  if (!n)
1612 	    {
1613 	      /* Invalidate the value of regcache that was set in function
1614 	         "regcache_raw_write".  */
1615 	      if (regno < 0)
1616 		{
1617 		  int i;
1618 
1619 		  for (i = 0;
1620 		       i < gdbarch_num_regs (get_regcache_arch (regcache));
1621 		       i++)
1622 		    regcache_invalidate (regcache, i);
1623 		}
1624 	      else
1625 		regcache_invalidate (regcache, regno);
1626 
1627 	      error (_("Process record canceled the operation."));
1628 	    }
1629 
1630 	  /* Destroy the record from here forward.  */
1631 	  record_full_list_release_following (record_full_list);
1632 	}
1633 
1634       record_full_registers_change (regcache, regno);
1635     }
1636   record_full_beneath_to_store_registers
1637     (record_full_beneath_to_store_registers_ops, regcache, regno);
1638 }
1639 
1640 /* "to_xfer_partial" method.  Behavior is conditional on
1641    RECORD_FULL_IS_REPLAY.
1642    In replay mode, we cannot write memory unles we are willing to
1643    invalidate the record/replay log from this point forward.  */
1644 
1645 static LONGEST
1646 record_full_xfer_partial (struct target_ops *ops, enum target_object object,
1647 			  const char *annex, gdb_byte *readbuf,
1648 			  const gdb_byte *writebuf, ULONGEST offset,
1649 			  LONGEST len)
1650 {
1651   if (!record_full_gdb_operation_disable
1652       && (object == TARGET_OBJECT_MEMORY
1653 	  || object == TARGET_OBJECT_RAW_MEMORY) && writebuf)
1654     {
1655       if (RECORD_FULL_IS_REPLAY)
1656 	{
1657 	  /* Let user choose if he wants to write memory or not.  */
1658 	  if (!query (_("Because GDB is in replay mode, writing to memory "
1659 		        "will make the execution log unusable from this "
1660 		        "point onward.  Write memory at address %s?"),
1661 		       paddress (target_gdbarch (), offset)))
1662 	    error (_("Process record canceled the operation."));
1663 
1664 	  /* Destroy the record from here forward.  */
1665 	  record_full_list_release_following (record_full_list);
1666 	}
1667 
1668       /* Check record_full_insn_num */
1669       record_full_check_insn_num (0);
1670 
1671       /* Record registers change to list as an instruction.  */
1672       record_full_arch_list_head = NULL;
1673       record_full_arch_list_tail = NULL;
1674       if (record_full_arch_list_add_mem (offset, len))
1675 	{
1676 	  record_full_list_release (record_full_arch_list_tail);
1677 	  if (record_debug)
1678 	    fprintf_unfiltered (gdb_stdlog,
1679 				"Process record: failed to record "
1680 				"execution log.");
1681 	  return -1;
1682 	}
1683       if (record_full_arch_list_add_end ())
1684 	{
1685 	  record_full_list_release (record_full_arch_list_tail);
1686 	  if (record_debug)
1687 	    fprintf_unfiltered (gdb_stdlog,
1688 				"Process record: failed to record "
1689 				"execution log.");
1690 	  return -1;
1691 	}
1692       record_full_list->next = record_full_arch_list_head;
1693       record_full_arch_list_head->prev = record_full_list;
1694       record_full_list = record_full_arch_list_tail;
1695 
1696       if (record_full_insn_num == record_full_insn_max_num
1697 	  && record_full_insn_max_num)
1698 	record_full_list_release_first ();
1699       else
1700 	record_full_insn_num++;
1701     }
1702 
1703   return record_full_beneath_to_xfer_partial
1704     (record_full_beneath_to_xfer_partial_ops, object, annex,
1705      readbuf, writebuf, offset, len);
1706 }
1707 
1708 /* This structure represents a breakpoint inserted while the record
1709    target is active.  We use this to know when to install/remove
1710    breakpoints in/from the target beneath.  For example, a breakpoint
1711    may be inserted while recording, but removed when not replaying nor
1712    recording.  In that case, the breakpoint had not been inserted on
1713    the target beneath, so we should not try to remove it there.  */
1714 
1715 struct record_full_breakpoint
1716 {
1717   /* The address and address space the breakpoint was set at.  */
1718   struct address_space *address_space;
1719   CORE_ADDR addr;
1720 
1721   /* True when the breakpoint has been also installed in the target
1722      beneath.  This will be false for breakpoints set during replay or
1723      when recording.  */
1724   int in_target_beneath;
1725 };
1726 
1727 typedef struct record_full_breakpoint *record_full_breakpoint_p;
1728 DEF_VEC_P(record_full_breakpoint_p);
1729 
1730 /* The list of breakpoints inserted while the record target is
1731    active.  */
1732 VEC(record_full_breakpoint_p) *record_full_breakpoints = NULL;
1733 
1734 static void
1735 record_full_sync_record_breakpoints (struct bp_location *loc, void *data)
1736 {
1737   if (loc->loc_type != bp_loc_software_breakpoint)
1738       return;
1739 
1740   if (loc->inserted)
1741     {
1742       struct record_full_breakpoint *bp = XNEW (struct record_full_breakpoint);
1743 
1744       bp->addr = loc->target_info.placed_address;
1745       bp->address_space = loc->target_info.placed_address_space;
1746 
1747       bp->in_target_beneath = 1;
1748 
1749       VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1750     }
1751 }
1752 
1753 /* Sync existing breakpoints to record_full_breakpoints.  */
1754 
1755 static void
1756 record_full_init_record_breakpoints (void)
1757 {
1758   VEC_free (record_full_breakpoint_p, record_full_breakpoints);
1759 
1760   iterate_over_bp_locations (record_full_sync_record_breakpoints);
1761 }
1762 
1763 /* Behavior is conditional on RECORD_FULL_IS_REPLAY.  We will not actually
1764    insert or remove breakpoints in the real target when replaying, nor
1765    when recording.  */
1766 
1767 static int
1768 record_full_insert_breakpoint (struct gdbarch *gdbarch,
1769 			       struct bp_target_info *bp_tgt)
1770 {
1771   struct record_full_breakpoint *bp;
1772   int in_target_beneath = 0;
1773 
1774   if (!RECORD_FULL_IS_REPLAY)
1775     {
1776       /* When recording, we currently always single-step, so we don't
1777 	 really need to install regular breakpoints in the inferior.
1778 	 However, we do have to insert software single-step
1779 	 breakpoints, in case the target can't hardware step.  To keep
1780 	 things single, we always insert.  */
1781       struct cleanup *old_cleanups;
1782       int ret;
1783 
1784       old_cleanups = record_full_gdb_operation_disable_set ();
1785       ret = record_full_beneath_to_insert_breakpoint (gdbarch, bp_tgt);
1786       do_cleanups (old_cleanups);
1787 
1788       if (ret != 0)
1789 	return ret;
1790 
1791       in_target_beneath = 1;
1792     }
1793 
1794   bp = XNEW (struct record_full_breakpoint);
1795   bp->addr = bp_tgt->placed_address;
1796   bp->address_space = bp_tgt->placed_address_space;
1797   bp->in_target_beneath = in_target_beneath;
1798   VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1799   return 0;
1800 }
1801 
1802 /* "to_remove_breakpoint" method for process record target.  */
1803 
1804 static int
1805 record_full_remove_breakpoint (struct gdbarch *gdbarch,
1806 			       struct bp_target_info *bp_tgt)
1807 {
1808   struct record_full_breakpoint *bp;
1809   int ix;
1810 
1811   for (ix = 0;
1812        VEC_iterate (record_full_breakpoint_p,
1813 		    record_full_breakpoints, ix, bp);
1814        ++ix)
1815     {
1816       if (bp->addr == bp_tgt->placed_address
1817 	  && bp->address_space == bp_tgt->placed_address_space)
1818 	{
1819 	  if (bp->in_target_beneath)
1820 	    {
1821 	      struct cleanup *old_cleanups;
1822 	      int ret;
1823 
1824 	      old_cleanups = record_full_gdb_operation_disable_set ();
1825 	      ret = record_full_beneath_to_remove_breakpoint (gdbarch, bp_tgt);
1826 	      do_cleanups (old_cleanups);
1827 
1828 	      if (ret != 0)
1829 		return ret;
1830 	    }
1831 
1832 	  VEC_unordered_remove (record_full_breakpoint_p,
1833 				record_full_breakpoints, ix);
1834 	  return 0;
1835 	}
1836     }
1837 
1838   gdb_assert_not_reached ("removing unknown breakpoint");
1839 }
1840 
1841 /* "to_can_execute_reverse" method for process record target.  */
1842 
1843 static int
1844 record_full_can_execute_reverse (void)
1845 {
1846   return 1;
1847 }
1848 
1849 /* "to_get_bookmark" method for process record and prec over core.  */
1850 
1851 static gdb_byte *
1852 record_full_get_bookmark (char *args, int from_tty)
1853 {
1854   gdb_byte *ret = NULL;
1855 
1856   /* Return stringified form of instruction count.  */
1857   if (record_full_list && record_full_list->type == record_full_end)
1858     ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
1859 
1860   if (record_debug)
1861     {
1862       if (ret)
1863 	fprintf_unfiltered (gdb_stdlog,
1864 			    "record_full_get_bookmark returns %s\n", ret);
1865       else
1866 	fprintf_unfiltered (gdb_stdlog,
1867 			    "record_full_get_bookmark returns NULL\n");
1868     }
1869   return ret;
1870 }
1871 
1872 /* "to_goto_bookmark" method for process record and prec over core.  */
1873 
1874 static void
1875 record_full_goto_bookmark (gdb_byte *bookmark, int from_tty)
1876 {
1877   if (record_debug)
1878     fprintf_unfiltered (gdb_stdlog,
1879 			"record_full_goto_bookmark receives %s\n", bookmark);
1880 
1881   if (bookmark[0] == '\'' || bookmark[0] == '\"')
1882     {
1883       if (bookmark[strlen (bookmark) - 1] != bookmark[0])
1884 	error (_("Unbalanced quotes: %s"), bookmark);
1885 
1886       /* Strip trailing quote.  */
1887       bookmark[strlen (bookmark) - 1] = '\0';
1888       /* Strip leading quote.  */
1889       bookmark++;
1890       /* Pass along to cmd_record_full_goto.  */
1891     }
1892 
1893   cmd_record_goto ((char *) bookmark, from_tty);
1894   return;
1895 }
1896 
1897 static void
1898 record_full_async (void (*callback) (enum inferior_event_type event_type,
1899 				     void *context), void *context)
1900 {
1901   /* If we're on top of a line target (e.g., linux-nat, remote), then
1902      set it to async mode as well.  Will be NULL if we're sitting on
1903      top of the core target, for "record restore".  */
1904   if (record_full_beneath_to_async != NULL)
1905     record_full_beneath_to_async (callback, context);
1906 }
1907 
1908 static int
1909 record_full_can_async_p (void)
1910 {
1911   /* We only enable async when the user specifically asks for it.  */
1912   return target_async_permitted;
1913 }
1914 
1915 static int
1916 record_full_is_async_p (void)
1917 {
1918   /* We only enable async when the user specifically asks for it.  */
1919   return target_async_permitted;
1920 }
1921 
1922 static enum exec_direction_kind
1923 record_full_execution_direction (void)
1924 {
1925   return record_full_execution_dir;
1926 }
1927 
1928 static void
1929 record_full_info (void)
1930 {
1931   struct record_full_entry *p;
1932 
1933   if (RECORD_FULL_IS_REPLAY)
1934     printf_filtered (_("Replay mode:\n"));
1935   else
1936     printf_filtered (_("Record mode:\n"));
1937 
1938   /* Find entry for first actual instruction in the log.  */
1939   for (p = record_full_first.next;
1940        p != NULL && p->type != record_full_end;
1941        p = p->next)
1942     ;
1943 
1944   /* Do we have a log at all?  */
1945   if (p != NULL && p->type == record_full_end)
1946     {
1947       /* Display instruction number for first instruction in the log.  */
1948       printf_filtered (_("Lowest recorded instruction number is %s.\n"),
1949 		       pulongest (p->u.end.insn_num));
1950 
1951       /* If in replay mode, display where we are in the log.  */
1952       if (RECORD_FULL_IS_REPLAY)
1953 	printf_filtered (_("Current instruction number is %s.\n"),
1954 			 pulongest (record_full_list->u.end.insn_num));
1955 
1956       /* Display instruction number for last instruction in the log.  */
1957       printf_filtered (_("Highest recorded instruction number is %s.\n"),
1958 		       pulongest (record_full_insn_count));
1959 
1960       /* Display log count.  */
1961       printf_filtered (_("Log contains %d instructions.\n"),
1962 		       record_full_insn_num);
1963     }
1964   else
1965     printf_filtered (_("No instructions have been logged.\n"));
1966 
1967   /* Display max log size.  */
1968   printf_filtered (_("Max logged instructions is %d.\n"),
1969 		   record_full_insn_max_num);
1970 }
1971 
1972 /* The "to_record_delete" target method.  */
1973 
1974 static void
1975 record_full_delete (void)
1976 {
1977   record_full_list_release_following (record_full_list);
1978 }
1979 
1980 /* The "to_record_is_replaying" target method.  */
1981 
1982 static int
1983 record_full_is_replaying (void)
1984 {
1985   return RECORD_FULL_IS_REPLAY;
1986 }
1987 
1988 /* Go to a specific entry.  */
1989 
1990 static void
1991 record_full_goto_entry (struct record_full_entry *p)
1992 {
1993   if (p == NULL)
1994     error (_("Target insn not found."));
1995   else if (p == record_full_list)
1996     error (_("Already at target insn."));
1997   else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
1998     {
1999       printf_filtered (_("Go forward to insn number %s\n"),
2000 		       pulongest (p->u.end.insn_num));
2001       record_full_goto_insn (p, EXEC_FORWARD);
2002     }
2003   else
2004     {
2005       printf_filtered (_("Go backward to insn number %s\n"),
2006 		       pulongest (p->u.end.insn_num));
2007       record_full_goto_insn (p, EXEC_REVERSE);
2008     }
2009 
2010   registers_changed ();
2011   reinit_frame_cache ();
2012   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
2013 }
2014 
2015 /* The "to_goto_record_begin" target method.  */
2016 
2017 static void
2018 record_full_goto_begin (void)
2019 {
2020   struct record_full_entry *p = NULL;
2021 
2022   for (p = &record_full_first; p != NULL; p = p->next)
2023     if (p->type == record_full_end)
2024       break;
2025 
2026   record_full_goto_entry (p);
2027 }
2028 
2029 /* The "to_goto_record_end" target method.  */
2030 
2031 static void
2032 record_full_goto_end (void)
2033 {
2034   struct record_full_entry *p = NULL;
2035 
2036   for (p = record_full_list; p->next != NULL; p = p->next)
2037     ;
2038   for (; p!= NULL; p = p->prev)
2039     if (p->type == record_full_end)
2040       break;
2041 
2042   record_full_goto_entry (p);
2043 }
2044 
2045 /* The "to_goto_record" target method.  */
2046 
2047 static void
2048 record_full_goto (ULONGEST target_insn)
2049 {
2050   struct record_full_entry *p = NULL;
2051 
2052   for (p = &record_full_first; p != NULL; p = p->next)
2053     if (p->type == record_full_end && p->u.end.insn_num == target_insn)
2054       break;
2055 
2056   record_full_goto_entry (p);
2057 }
2058 
2059 static void
2060 init_record_full_ops (void)
2061 {
2062   record_full_ops.to_shortname = "record-full";
2063   record_full_ops.to_longname = "Process record and replay target";
2064   record_full_ops.to_doc =
2065     "Log program while executing and replay execution from log.";
2066   record_full_ops.to_open = record_full_open;
2067   record_full_ops.to_close = record_full_close;
2068   record_full_ops.to_resume = record_full_resume;
2069   record_full_ops.to_wait = record_full_wait;
2070   record_full_ops.to_disconnect = record_disconnect;
2071   record_full_ops.to_detach = record_detach;
2072   record_full_ops.to_mourn_inferior = record_mourn_inferior;
2073   record_full_ops.to_kill = record_kill;
2074   record_full_ops.to_create_inferior = find_default_create_inferior;
2075   record_full_ops.to_store_registers = record_full_store_registers;
2076   record_full_ops.to_xfer_partial = record_full_xfer_partial;
2077   record_full_ops.to_insert_breakpoint = record_full_insert_breakpoint;
2078   record_full_ops.to_remove_breakpoint = record_full_remove_breakpoint;
2079   record_full_ops.to_stopped_by_watchpoint = record_full_stopped_by_watchpoint;
2080   record_full_ops.to_stopped_data_address = record_full_stopped_data_address;
2081   record_full_ops.to_can_execute_reverse = record_full_can_execute_reverse;
2082   record_full_ops.to_stratum = record_stratum;
2083   /* Add bookmark target methods.  */
2084   record_full_ops.to_get_bookmark = record_full_get_bookmark;
2085   record_full_ops.to_goto_bookmark = record_full_goto_bookmark;
2086   record_full_ops.to_async = record_full_async;
2087   record_full_ops.to_can_async_p = record_full_can_async_p;
2088   record_full_ops.to_is_async_p = record_full_is_async_p;
2089   record_full_ops.to_execution_direction = record_full_execution_direction;
2090   record_full_ops.to_info_record = record_full_info;
2091   record_full_ops.to_save_record = record_full_save;
2092   record_full_ops.to_delete_record = record_full_delete;
2093   record_full_ops.to_record_is_replaying = record_full_is_replaying;
2094   record_full_ops.to_goto_record_begin = record_full_goto_begin;
2095   record_full_ops.to_goto_record_end = record_full_goto_end;
2096   record_full_ops.to_goto_record = record_full_goto;
2097   record_full_ops.to_magic = OPS_MAGIC;
2098 }
2099 
2100 /* "to_resume" method for prec over corefile.  */
2101 
2102 static void
2103 record_full_core_resume (struct target_ops *ops, ptid_t ptid, int step,
2104 			 enum gdb_signal signal)
2105 {
2106   record_full_resume_step = step;
2107   record_full_resumed = 1;
2108   record_full_execution_dir = execution_direction;
2109 
2110   /* We are about to start executing the inferior (or simulate it),
2111      let's register it with the event loop.  */
2112   if (target_can_async_p ())
2113     {
2114       target_async (inferior_event_handler, 0);
2115 
2116       /* Notify the event loop there's an event to wait for.  */
2117       mark_async_event_handler (record_full_async_inferior_event_token);
2118     }
2119 }
2120 
2121 /* "to_kill" method for prec over corefile.  */
2122 
2123 static void
2124 record_full_core_kill (struct target_ops *ops)
2125 {
2126   if (record_debug)
2127     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n");
2128 
2129   unpush_target (&record_full_core_ops);
2130 }
2131 
2132 /* "to_fetch_registers" method for prec over corefile.  */
2133 
2134 static void
2135 record_full_core_fetch_registers (struct target_ops *ops,
2136 				  struct regcache *regcache,
2137 				  int regno)
2138 {
2139   if (regno < 0)
2140     {
2141       int num = gdbarch_num_regs (get_regcache_arch (regcache));
2142       int i;
2143 
2144       for (i = 0; i < num; i ++)
2145         regcache_raw_supply (regcache, i,
2146                              record_full_core_regbuf + MAX_REGISTER_SIZE * i);
2147     }
2148   else
2149     regcache_raw_supply (regcache, regno,
2150                          record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2151 }
2152 
2153 /* "to_prepare_to_store" method for prec over corefile.  */
2154 
2155 static void
2156 record_full_core_prepare_to_store (struct regcache *regcache)
2157 {
2158 }
2159 
2160 /* "to_store_registers" method for prec over corefile.  */
2161 
2162 static void
2163 record_full_core_store_registers (struct target_ops *ops,
2164                              struct regcache *regcache,
2165                              int regno)
2166 {
2167   if (record_full_gdb_operation_disable)
2168     regcache_raw_collect (regcache, regno,
2169                           record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2170   else
2171     error (_("You can't do that without a process to debug."));
2172 }
2173 
2174 /* "to_xfer_partial" method for prec over corefile.  */
2175 
2176 static LONGEST
2177 record_full_core_xfer_partial (struct target_ops *ops,
2178 			       enum target_object object,
2179 			       const char *annex, gdb_byte *readbuf,
2180 			       const gdb_byte *writebuf, ULONGEST offset,
2181 			       LONGEST len)
2182 {
2183   if (object == TARGET_OBJECT_MEMORY)
2184     {
2185       if (record_full_gdb_operation_disable || !writebuf)
2186 	{
2187 	  struct target_section *p;
2188 
2189 	  for (p = record_full_core_start; p < record_full_core_end; p++)
2190 	    {
2191 	      if (offset >= p->addr)
2192 		{
2193 		  struct record_full_core_buf_entry *entry;
2194 		  ULONGEST sec_offset;
2195 
2196 		  if (offset >= p->endaddr)
2197 		    continue;
2198 
2199 		  if (offset + len > p->endaddr)
2200 		    len = p->endaddr - offset;
2201 
2202 		  sec_offset = offset - p->addr;
2203 
2204 		  /* Read readbuf or write writebuf p, offset, len.  */
2205 		  /* Check flags.  */
2206 		  if (p->the_bfd_section->flags & SEC_CONSTRUCTOR
2207 		      || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0)
2208 		    {
2209 		      if (readbuf)
2210 			memset (readbuf, 0, len);
2211 		      return len;
2212 		    }
2213 		  /* Get record_full_core_buf_entry.  */
2214 		  for (entry = record_full_core_buf_list; entry;
2215 		       entry = entry->prev)
2216 		    if (entry->p == p)
2217 		      break;
2218 		  if (writebuf)
2219 		    {
2220 		      if (!entry)
2221 			{
2222 			  /* Add a new entry.  */
2223 			  entry = (struct record_full_core_buf_entry *)
2224 			    xmalloc
2225 			    (sizeof (struct record_full_core_buf_entry));
2226 			  entry->p = p;
2227 			  if (!bfd_malloc_and_get_section (p->bfd,
2228 							   p->the_bfd_section,
2229 							   &entry->buf))
2230 			    {
2231 			      xfree (entry);
2232 			      return 0;
2233 			    }
2234 			  entry->prev = record_full_core_buf_list;
2235 			  record_full_core_buf_list = entry;
2236 			}
2237 
2238 		      memcpy (entry->buf + sec_offset, writebuf,
2239 			      (size_t) len);
2240 		    }
2241 		  else
2242 		    {
2243 		      if (!entry)
2244 			return record_full_beneath_to_xfer_partial
2245 			  (record_full_beneath_to_xfer_partial_ops,
2246 			   object, annex, readbuf, writebuf,
2247 			   offset, len);
2248 
2249 		      memcpy (readbuf, entry->buf + sec_offset,
2250 			      (size_t) len);
2251 		    }
2252 
2253 		  return len;
2254 		}
2255 	    }
2256 
2257 	  return -1;
2258 	}
2259       else
2260 	error (_("You can't do that without a process to debug."));
2261     }
2262 
2263   return record_full_beneath_to_xfer_partial
2264     (record_full_beneath_to_xfer_partial_ops, object, annex,
2265      readbuf, writebuf, offset, len);
2266 }
2267 
2268 /* "to_insert_breakpoint" method for prec over corefile.  */
2269 
2270 static int
2271 record_full_core_insert_breakpoint (struct gdbarch *gdbarch,
2272 				    struct bp_target_info *bp_tgt)
2273 {
2274   return 0;
2275 }
2276 
2277 /* "to_remove_breakpoint" method for prec over corefile.  */
2278 
2279 static int
2280 record_full_core_remove_breakpoint (struct gdbarch *gdbarch,
2281 				    struct bp_target_info *bp_tgt)
2282 {
2283   return 0;
2284 }
2285 
2286 /* "to_has_execution" method for prec over corefile.  */
2287 
2288 static int
2289 record_full_core_has_execution (struct target_ops *ops, ptid_t the_ptid)
2290 {
2291   return 1;
2292 }
2293 
2294 static void
2295 init_record_full_core_ops (void)
2296 {
2297   record_full_core_ops.to_shortname = "record-core";
2298   record_full_core_ops.to_longname = "Process record and replay target";
2299   record_full_core_ops.to_doc =
2300     "Log program while executing and replay execution from log.";
2301   record_full_core_ops.to_open = record_full_open;
2302   record_full_core_ops.to_close = record_full_close;
2303   record_full_core_ops.to_resume = record_full_core_resume;
2304   record_full_core_ops.to_wait = record_full_wait;
2305   record_full_core_ops.to_kill = record_full_core_kill;
2306   record_full_core_ops.to_fetch_registers = record_full_core_fetch_registers;
2307   record_full_core_ops.to_prepare_to_store = record_full_core_prepare_to_store;
2308   record_full_core_ops.to_store_registers = record_full_core_store_registers;
2309   record_full_core_ops.to_xfer_partial = record_full_core_xfer_partial;
2310   record_full_core_ops.to_insert_breakpoint
2311     = record_full_core_insert_breakpoint;
2312   record_full_core_ops.to_remove_breakpoint
2313     = record_full_core_remove_breakpoint;
2314   record_full_core_ops.to_stopped_by_watchpoint
2315     = record_full_stopped_by_watchpoint;
2316   record_full_core_ops.to_stopped_data_address
2317     = record_full_stopped_data_address;
2318   record_full_core_ops.to_can_execute_reverse
2319     = record_full_can_execute_reverse;
2320   record_full_core_ops.to_has_execution = record_full_core_has_execution;
2321   record_full_core_ops.to_stratum = record_stratum;
2322   /* Add bookmark target methods.  */
2323   record_full_core_ops.to_get_bookmark = record_full_get_bookmark;
2324   record_full_core_ops.to_goto_bookmark = record_full_goto_bookmark;
2325   record_full_core_ops.to_async = record_full_async;
2326   record_full_core_ops.to_can_async_p = record_full_can_async_p;
2327   record_full_core_ops.to_is_async_p = record_full_is_async_p;
2328   record_full_core_ops.to_execution_direction
2329     = record_full_execution_direction;
2330   record_full_core_ops.to_info_record = record_full_info;
2331   record_full_core_ops.to_delete_record = record_full_delete;
2332   record_full_core_ops.to_record_is_replaying = record_full_is_replaying;
2333   record_full_core_ops.to_goto_record_begin = record_full_goto_begin;
2334   record_full_core_ops.to_goto_record_end = record_full_goto_end;
2335   record_full_core_ops.to_goto_record = record_full_goto;
2336   record_full_core_ops.to_magic = OPS_MAGIC;
2337 }
2338 
2339 /* Record log save-file format
2340    Version 1 (never released)
2341 
2342    Header:
2343      4 bytes: magic number htonl(0x20090829).
2344        NOTE: be sure to change whenever this file format changes!
2345 
2346    Records:
2347      record_full_end:
2348        1 byte:  record type (record_full_end, see enum record_full_type).
2349      record_full_reg:
2350        1 byte:  record type (record_full_reg, see enum record_full_type).
2351        8 bytes: register id (network byte order).
2352        MAX_REGISTER_SIZE bytes: register value.
2353      record_full_mem:
2354        1 byte:  record type (record_full_mem, see enum record_full_type).
2355        8 bytes: memory length (network byte order).
2356        8 bytes: memory address (network byte order).
2357        n bytes: memory value (n == memory length).
2358 
2359    Version 2
2360      4 bytes: magic number netorder32(0x20091016).
2361        NOTE: be sure to change whenever this file format changes!
2362 
2363    Records:
2364      record_full_end:
2365        1 byte:  record type (record_full_end, see enum record_full_type).
2366        4 bytes: signal
2367        4 bytes: instruction count
2368      record_full_reg:
2369        1 byte:  record type (record_full_reg, see enum record_full_type).
2370        4 bytes: register id (network byte order).
2371        n bytes: register value (n == actual register size).
2372                 (eg. 4 bytes for x86 general registers).
2373      record_full_mem:
2374        1 byte:  record type (record_full_mem, see enum record_full_type).
2375        4 bytes: memory length (network byte order).
2376        8 bytes: memory address (network byte order).
2377        n bytes: memory value (n == memory length).
2378 
2379 */
2380 
2381 /* bfdcore_read -- read bytes from a core file section.  */
2382 
2383 static inline void
2384 bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2385 {
2386   int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len);
2387 
2388   if (ret)
2389     *offset += len;
2390   else
2391     error (_("Failed to read %d bytes from core file %s ('%s')."),
2392 	   len, bfd_get_filename (obfd),
2393 	   bfd_errmsg (bfd_get_error ()));
2394 }
2395 
2396 static inline uint64_t
2397 netorder64 (uint64_t input)
2398 {
2399   uint64_t ret;
2400 
2401   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2402 			  BFD_ENDIAN_BIG, input);
2403   return ret;
2404 }
2405 
2406 static inline uint32_t
2407 netorder32 (uint32_t input)
2408 {
2409   uint32_t ret;
2410 
2411   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2412 			  BFD_ENDIAN_BIG, input);
2413   return ret;
2414 }
2415 
2416 static inline uint16_t
2417 netorder16 (uint16_t input)
2418 {
2419   uint16_t ret;
2420 
2421   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2422 			  BFD_ENDIAN_BIG, input);
2423   return ret;
2424 }
2425 
2426 /* Restore the execution log from a core_bfd file.  */
2427 static void
2428 record_full_restore (void)
2429 {
2430   uint32_t magic;
2431   struct cleanup *old_cleanups;
2432   struct record_full_entry *rec;
2433   asection *osec;
2434   uint32_t osec_size;
2435   int bfd_offset = 0;
2436   struct regcache *regcache;
2437 
2438   /* We restore the execution log from the open core bfd,
2439      if there is one.  */
2440   if (core_bfd == NULL)
2441     return;
2442 
2443   /* "record_full_restore" can only be called when record list is empty.  */
2444   gdb_assert (record_full_first.next == NULL);
2445 
2446   if (record_debug)
2447     fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n");
2448 
2449   /* Now need to find our special note section.  */
2450   osec = bfd_get_section_by_name (core_bfd, "null0");
2451   if (record_debug)
2452     fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n",
2453 			osec ? "succeeded" : "failed");
2454   if (osec == NULL)
2455     return;
2456   osec_size = bfd_section_size (core_bfd, osec);
2457   if (record_debug)
2458     fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (core_bfd, osec));
2459 
2460   /* Check the magic code.  */
2461   bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset);
2462   if (magic != RECORD_FULL_FILE_MAGIC)
2463     error (_("Version mis-match or file format error in core file %s."),
2464 	   bfd_get_filename (core_bfd));
2465   if (record_debug)
2466     fprintf_unfiltered (gdb_stdlog,
2467 			"  Reading 4-byte magic cookie "
2468 			"RECORD_FULL_FILE_MAGIC (0x%s)\n",
2469 			phex_nz (netorder32 (magic), 4));
2470 
2471   /* Restore the entries in recfd into record_full_arch_list_head and
2472      record_full_arch_list_tail.  */
2473   record_full_arch_list_head = NULL;
2474   record_full_arch_list_tail = NULL;
2475   record_full_insn_num = 0;
2476   old_cleanups = make_cleanup (record_full_arch_list_cleanups, 0);
2477   regcache = get_current_regcache ();
2478 
2479   while (1)
2480     {
2481       uint8_t rectype;
2482       uint32_t regnum, len, signal, count;
2483       uint64_t addr;
2484 
2485       /* We are finished when offset reaches osec_size.  */
2486       if (bfd_offset >= osec_size)
2487 	break;
2488       bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset);
2489 
2490       switch (rectype)
2491         {
2492         case record_full_reg: /* reg */
2493           /* Get register number to regnum.  */
2494           bfdcore_read (core_bfd, osec, &regnum,
2495 			sizeof (regnum), &bfd_offset);
2496 	  regnum = netorder32 (regnum);
2497 
2498           rec = record_full_reg_alloc (regcache, regnum);
2499 
2500           /* Get val.  */
2501           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2502 			rec->u.reg.len, &bfd_offset);
2503 
2504 	  if (record_debug)
2505 	    fprintf_unfiltered (gdb_stdlog,
2506 				"  Reading register %d (1 "
2507 				"plus %lu plus %d bytes)\n",
2508 				rec->u.reg.num,
2509 				(unsigned long) sizeof (regnum),
2510 				rec->u.reg.len);
2511           break;
2512 
2513         case record_full_mem: /* mem */
2514           /* Get len.  */
2515           bfdcore_read (core_bfd, osec, &len,
2516 			sizeof (len), &bfd_offset);
2517 	  len = netorder32 (len);
2518 
2519           /* Get addr.  */
2520           bfdcore_read (core_bfd, osec, &addr,
2521 			sizeof (addr), &bfd_offset);
2522 	  addr = netorder64 (addr);
2523 
2524           rec = record_full_mem_alloc (addr, len);
2525 
2526           /* Get val.  */
2527           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2528 			rec->u.mem.len, &bfd_offset);
2529 
2530 	  if (record_debug)
2531 	    fprintf_unfiltered (gdb_stdlog,
2532 				"  Reading memory %s (1 plus "
2533 				"%lu plus %lu plus %d bytes)\n",
2534 				paddress (get_current_arch (),
2535 					  rec->u.mem.addr),
2536 				(unsigned long) sizeof (addr),
2537 				(unsigned long) sizeof (len),
2538 				rec->u.mem.len);
2539           break;
2540 
2541         case record_full_end: /* end */
2542           rec = record_full_end_alloc ();
2543           record_full_insn_num ++;
2544 
2545 	  /* Get signal value.  */
2546 	  bfdcore_read (core_bfd, osec, &signal,
2547 			sizeof (signal), &bfd_offset);
2548 	  signal = netorder32 (signal);
2549 	  rec->u.end.sigval = signal;
2550 
2551 	  /* Get insn count.  */
2552 	  bfdcore_read (core_bfd, osec, &count,
2553 			sizeof (count), &bfd_offset);
2554 	  count = netorder32 (count);
2555 	  rec->u.end.insn_num = count;
2556 	  record_full_insn_count = count + 1;
2557 	  if (record_debug)
2558 	    fprintf_unfiltered (gdb_stdlog,
2559 				"  Reading record_full_end (1 + "
2560 				"%lu + %lu bytes), offset == %s\n",
2561 				(unsigned long) sizeof (signal),
2562 				(unsigned long) sizeof (count),
2563 				paddress (get_current_arch (),
2564 					  bfd_offset));
2565           break;
2566 
2567         default:
2568           error (_("Bad entry type in core file %s."),
2569 		 bfd_get_filename (core_bfd));
2570           break;
2571         }
2572 
2573       /* Add rec to record arch list.  */
2574       record_full_arch_list_add (rec);
2575     }
2576 
2577   discard_cleanups (old_cleanups);
2578 
2579   /* Add record_full_arch_list_head to the end of record list.  */
2580   record_full_first.next = record_full_arch_list_head;
2581   record_full_arch_list_head->prev = &record_full_first;
2582   record_full_arch_list_tail->next = NULL;
2583   record_full_list = &record_full_first;
2584 
2585   /* Update record_full_insn_max_num.  */
2586   if (record_full_insn_num > record_full_insn_max_num)
2587     {
2588       record_full_insn_max_num = record_full_insn_num;
2589       warning (_("Auto increase record/replay buffer limit to %d."),
2590                record_full_insn_max_num);
2591     }
2592 
2593   /* Succeeded.  */
2594   printf_filtered (_("Restored records from core file %s.\n"),
2595 		   bfd_get_filename (core_bfd));
2596 
2597   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
2598 }
2599 
2600 /* bfdcore_write -- write bytes into a core file section.  */
2601 
2602 static inline void
2603 bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2604 {
2605   int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len);
2606 
2607   if (ret)
2608     *offset += len;
2609   else
2610     error (_("Failed to write %d bytes to core file %s ('%s')."),
2611 	   len, bfd_get_filename (obfd),
2612 	   bfd_errmsg (bfd_get_error ()));
2613 }
2614 
2615 /* Restore the execution log from a file.  We use a modified elf
2616    corefile format, with an extra section for our data.  */
2617 
2618 static void
2619 cmd_record_full_restore (char *args, int from_tty)
2620 {
2621   core_file_command (args, from_tty);
2622   record_full_open (args, from_tty);
2623 }
2624 
2625 static void
2626 record_full_save_cleanups (void *data)
2627 {
2628   bfd *obfd = data;
2629   char *pathname = xstrdup (bfd_get_filename (obfd));
2630 
2631   gdb_bfd_unref (obfd);
2632   unlink (pathname);
2633   xfree (pathname);
2634 }
2635 
2636 /* Save the execution log to a file.  We use a modified elf corefile
2637    format, with an extra section for our data.  */
2638 
2639 static void
2640 record_full_save (char *recfilename)
2641 {
2642   struct record_full_entry *cur_record_full_list;
2643   uint32_t magic;
2644   struct regcache *regcache;
2645   struct gdbarch *gdbarch;
2646   struct cleanup *old_cleanups;
2647   struct cleanup *set_cleanups;
2648   bfd *obfd;
2649   int save_size = 0;
2650   asection *osec = NULL;
2651   int bfd_offset = 0;
2652 
2653   /* Open the save file.  */
2654   if (record_debug)
2655     fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n",
2656 			recfilename);
2657 
2658   /* Open the output file.  */
2659   obfd = create_gcore_bfd (recfilename);
2660   old_cleanups = make_cleanup (record_full_save_cleanups, obfd);
2661 
2662   /* Save the current record entry to "cur_record_full_list".  */
2663   cur_record_full_list = record_full_list;
2664 
2665   /* Get the values of regcache and gdbarch.  */
2666   regcache = get_current_regcache ();
2667   gdbarch = get_regcache_arch (regcache);
2668 
2669   /* Disable the GDB operation record.  */
2670   set_cleanups = record_full_gdb_operation_disable_set ();
2671 
2672   /* Reverse execute to the begin of record list.  */
2673   while (1)
2674     {
2675       /* Check for beginning and end of log.  */
2676       if (record_full_list == &record_full_first)
2677         break;
2678 
2679       record_full_exec_insn (regcache, gdbarch, record_full_list);
2680 
2681       if (record_full_list->prev)
2682         record_full_list = record_full_list->prev;
2683     }
2684 
2685   /* Compute the size needed for the extra bfd section.  */
2686   save_size = 4;	/* magic cookie */
2687   for (record_full_list = record_full_first.next; record_full_list;
2688        record_full_list = record_full_list->next)
2689     switch (record_full_list->type)
2690       {
2691       case record_full_end:
2692 	save_size += 1 + 4 + 4;
2693 	break;
2694       case record_full_reg:
2695 	save_size += 1 + 4 + record_full_list->u.reg.len;
2696 	break;
2697       case record_full_mem:
2698 	save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
2699 	break;
2700       }
2701 
2702   /* Make the new bfd section.  */
2703   osec = bfd_make_section_anyway_with_flags (obfd, "precord",
2704                                              SEC_HAS_CONTENTS
2705                                              | SEC_READONLY);
2706   if (osec == NULL)
2707     error (_("Failed to create 'precord' section for corefile %s: %s"),
2708 	   recfilename,
2709            bfd_errmsg (bfd_get_error ()));
2710   bfd_set_section_size (obfd, osec, save_size);
2711   bfd_set_section_vma (obfd, osec, 0);
2712   bfd_set_section_alignment (obfd, osec, 0);
2713   bfd_section_lma (obfd, osec) = 0;
2714 
2715   /* Save corefile state.  */
2716   write_gcore_file (obfd);
2717 
2718   /* Write out the record log.  */
2719   /* Write the magic code.  */
2720   magic = RECORD_FULL_FILE_MAGIC;
2721   if (record_debug)
2722     fprintf_unfiltered (gdb_stdlog,
2723 			"  Writing 4-byte magic cookie "
2724 			"RECORD_FULL_FILE_MAGIC (0x%s)\n",
2725 		      phex_nz (magic, 4));
2726   bfdcore_write (obfd, osec, &magic, sizeof (magic), &bfd_offset);
2727 
2728   /* Save the entries to recfd and forward execute to the end of
2729      record list.  */
2730   record_full_list = &record_full_first;
2731   while (1)
2732     {
2733       /* Save entry.  */
2734       if (record_full_list != &record_full_first)
2735         {
2736 	  uint8_t type;
2737 	  uint32_t regnum, len, signal, count;
2738           uint64_t addr;
2739 
2740 	  type = record_full_list->type;
2741           bfdcore_write (obfd, osec, &type, sizeof (type), &bfd_offset);
2742 
2743           switch (record_full_list->type)
2744             {
2745             case record_full_reg: /* reg */
2746 	      if (record_debug)
2747 		fprintf_unfiltered (gdb_stdlog,
2748 				    "  Writing register %d (1 "
2749 				    "plus %lu plus %d bytes)\n",
2750 				    record_full_list->u.reg.num,
2751 				    (unsigned long) sizeof (regnum),
2752 				    record_full_list->u.reg.len);
2753 
2754               /* Write regnum.  */
2755               regnum = netorder32 (record_full_list->u.reg.num);
2756               bfdcore_write (obfd, osec, &regnum,
2757 			     sizeof (regnum), &bfd_offset);
2758 
2759               /* Write regval.  */
2760               bfdcore_write (obfd, osec,
2761 			     record_full_get_loc (record_full_list),
2762 			     record_full_list->u.reg.len, &bfd_offset);
2763               break;
2764 
2765             case record_full_mem: /* mem */
2766 	      if (record_debug)
2767 		fprintf_unfiltered (gdb_stdlog,
2768 				    "  Writing memory %s (1 plus "
2769 				    "%lu plus %lu plus %d bytes)\n",
2770 				    paddress (gdbarch,
2771 					      record_full_list->u.mem.addr),
2772 				    (unsigned long) sizeof (addr),
2773 				    (unsigned long) sizeof (len),
2774 				    record_full_list->u.mem.len);
2775 
2776 	      /* Write memlen.  */
2777 	      len = netorder32 (record_full_list->u.mem.len);
2778 	      bfdcore_write (obfd, osec, &len, sizeof (len), &bfd_offset);
2779 
2780 	      /* Write memaddr.  */
2781 	      addr = netorder64 (record_full_list->u.mem.addr);
2782 	      bfdcore_write (obfd, osec, &addr,
2783 			     sizeof (addr), &bfd_offset);
2784 
2785 	      /* Write memval.  */
2786 	      bfdcore_write (obfd, osec,
2787 			     record_full_get_loc (record_full_list),
2788 			     record_full_list->u.mem.len, &bfd_offset);
2789               break;
2790 
2791               case record_full_end:
2792 		if (record_debug)
2793 		  fprintf_unfiltered (gdb_stdlog,
2794 				      "  Writing record_full_end (1 + "
2795 				      "%lu + %lu bytes)\n",
2796 				      (unsigned long) sizeof (signal),
2797 				      (unsigned long) sizeof (count));
2798 		/* Write signal value.  */
2799 		signal = netorder32 (record_full_list->u.end.sigval);
2800 		bfdcore_write (obfd, osec, &signal,
2801 			       sizeof (signal), &bfd_offset);
2802 
2803 		/* Write insn count.  */
2804 		count = netorder32 (record_full_list->u.end.insn_num);
2805 		bfdcore_write (obfd, osec, &count,
2806 			       sizeof (count), &bfd_offset);
2807                 break;
2808             }
2809         }
2810 
2811       /* Execute entry.  */
2812       record_full_exec_insn (regcache, gdbarch, record_full_list);
2813 
2814       if (record_full_list->next)
2815         record_full_list = record_full_list->next;
2816       else
2817         break;
2818     }
2819 
2820   /* Reverse execute to cur_record_full_list.  */
2821   while (1)
2822     {
2823       /* Check for beginning and end of log.  */
2824       if (record_full_list == cur_record_full_list)
2825         break;
2826 
2827       record_full_exec_insn (regcache, gdbarch, record_full_list);
2828 
2829       if (record_full_list->prev)
2830         record_full_list = record_full_list->prev;
2831     }
2832 
2833   do_cleanups (set_cleanups);
2834   gdb_bfd_unref (obfd);
2835   discard_cleanups (old_cleanups);
2836 
2837   /* Succeeded.  */
2838   printf_filtered (_("Saved core file %s with execution log.\n"),
2839 		   recfilename);
2840 }
2841 
2842 /* record_full_goto_insn -- rewind the record log (forward or backward,
2843    depending on DIR) to the given entry, changing the program state
2844    correspondingly.  */
2845 
2846 static void
2847 record_full_goto_insn (struct record_full_entry *entry,
2848 		       enum exec_direction_kind dir)
2849 {
2850   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
2851   struct regcache *regcache = get_current_regcache ();
2852   struct gdbarch *gdbarch = get_regcache_arch (regcache);
2853 
2854   /* Assume everything is valid: we will hit the entry,
2855      and we will not hit the end of the recording.  */
2856 
2857   if (dir == EXEC_FORWARD)
2858     record_full_list = record_full_list->next;
2859 
2860   do
2861     {
2862       record_full_exec_insn (regcache, gdbarch, record_full_list);
2863       if (dir == EXEC_REVERSE)
2864 	record_full_list = record_full_list->prev;
2865       else
2866 	record_full_list = record_full_list->next;
2867     } while (record_full_list != entry);
2868   do_cleanups (set_cleanups);
2869 }
2870 
2871 /* Alias for "target record-full".  */
2872 
2873 static void
2874 cmd_record_full_start (char *args, int from_tty)
2875 {
2876   execute_command ("target record-full", from_tty);
2877 }
2878 
2879 static void
2880 set_record_full_insn_max_num (char *args, int from_tty,
2881 			      struct cmd_list_element *c)
2882 {
2883   if (record_full_insn_num > record_full_insn_max_num
2884       && record_full_insn_max_num)
2885     {
2886       /* Count down record_full_insn_num while releasing records from list.  */
2887       while (record_full_insn_num > record_full_insn_max_num)
2888        {
2889          record_full_list_release_first ();
2890          record_full_insn_num--;
2891        }
2892     }
2893 }
2894 
2895 /* The "set record full" command.  */
2896 
2897 static void
2898 set_record_full_command (char *args, int from_tty)
2899 {
2900   printf_unfiltered (_("\"set record full\" must be followed "
2901 		       "by an apporpriate subcommand.\n"));
2902   help_list (set_record_full_cmdlist, "set record full ", all_commands,
2903 	     gdb_stdout);
2904 }
2905 
2906 /* The "show record full" command.  */
2907 
2908 static void
2909 show_record_full_command (char *args, int from_tty)
2910 {
2911   cmd_show_list (show_record_full_cmdlist, from_tty, "");
2912 }
2913 
2914 /* Provide a prototype to silence -Wmissing-prototypes.  */
2915 extern initialize_file_ftype _initialize_record_full;
2916 
2917 void
2918 _initialize_record_full (void)
2919 {
2920   struct cmd_list_element *c;
2921 
2922   /* Init record_full_first.  */
2923   record_full_first.prev = NULL;
2924   record_full_first.next = NULL;
2925   record_full_first.type = record_full_end;
2926 
2927   init_record_full_ops ();
2928   add_target (&record_full_ops);
2929   add_deprecated_target_alias (&record_full_ops, "record");
2930   init_record_full_core_ops ();
2931   add_target (&record_full_core_ops);
2932 
2933   add_prefix_cmd ("full", class_obscure, cmd_record_full_start,
2934 		  _("Start full execution recording."), &record_full_cmdlist,
2935 		  "record full ", 0, &record_cmdlist);
2936 
2937   c = add_cmd ("restore", class_obscure, cmd_record_full_restore,
2938 	       _("Restore the execution log from a file.\n\
2939 Argument is filename.  File must be created with 'record save'."),
2940 	       &record_full_cmdlist);
2941   set_cmd_completer (c, filename_completer);
2942 
2943   /* Deprecate the old version without "full" prefix.  */
2944   c = add_alias_cmd ("restore", "full restore", class_obscure, 1,
2945 		     &record_cmdlist);
2946   set_cmd_completer (c, filename_completer);
2947   deprecate_cmd (c, "record full restore");
2948 
2949   add_prefix_cmd ("full", class_support, set_record_full_command,
2950 		  _("Set record options"), &set_record_full_cmdlist,
2951 		  "set record full ", 0, &set_record_cmdlist);
2952 
2953   add_prefix_cmd ("full", class_support, show_record_full_command,
2954 		  _("Show record options"), &show_record_full_cmdlist,
2955 		  "show record full ", 0, &show_record_cmdlist);
2956 
2957   /* Record instructions number limit command.  */
2958   add_setshow_boolean_cmd ("stop-at-limit", no_class,
2959 			   &record_full_stop_at_limit, _("\
2960 Set whether record/replay stops when record/replay buffer becomes full."), _("\
2961 Show whether record/replay stops when record/replay buffer becomes full."),
2962 			   _("Default is ON.\n\
2963 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
2964 When OFF, if the record/replay buffer becomes full,\n\
2965 delete the oldest recorded instruction to make room for each new one."),
2966 			   NULL, NULL,
2967 			   &set_record_full_cmdlist, &show_record_full_cmdlist);
2968 
2969   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2970 		     &set_record_cmdlist);
2971   deprecate_cmd (c, "set record full stop-at-limit");
2972 
2973   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2974 		     &show_record_cmdlist);
2975   deprecate_cmd (c, "show record full stop-at-limit");
2976 
2977   add_setshow_uinteger_cmd ("insn-number-max", no_class,
2978 			    &record_full_insn_max_num,
2979 			    _("Set record/replay buffer limit."),
2980 			    _("Show record/replay buffer limit."), _("\
2981 Set the maximum number of instructions to be stored in the\n\
2982 record/replay buffer.  Zero means unlimited.  Default is 200000."),
2983 			    set_record_full_insn_max_num,
2984 			    NULL, &set_record_full_cmdlist,
2985 			    &show_record_full_cmdlist);
2986 
2987   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2988 		     &set_record_cmdlist);
2989   deprecate_cmd (c, "set record full insn-number-max");
2990 
2991   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2992 		     &show_record_cmdlist);
2993   deprecate_cmd (c, "show record full insn-number-max");
2994 
2995   add_setshow_boolean_cmd ("memory-query", no_class,
2996 			   &record_full_memory_query, _("\
2997 Set whether query if PREC cannot record memory change of next instruction."),
2998                            _("\
2999 Show whether query if PREC cannot record memory change of next instruction."),
3000                            _("\
3001 Default is OFF.\n\
3002 When ON, query if PREC cannot record memory change of next instruction."),
3003 			   NULL, NULL,
3004 			   &set_record_full_cmdlist,
3005 			   &show_record_full_cmdlist);
3006 
3007   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
3008 		     &set_record_cmdlist);
3009   deprecate_cmd (c, "set record full memory-query");
3010 
3011   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
3012 		     &show_record_cmdlist);
3013   deprecate_cmd (c, "show record full memory-query");
3014 }
3015