1 /*
2  * WPA Supplicant - Basic mesh mode routines
3  * Copyright (c) 2013-2014, cozybit, Inc.  All rights reserved.
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  */
8 
9 #include "utils/includes.h"
10 
11 #include "utils/common.h"
12 #include "utils/eloop.h"
13 #include "utils/uuid.h"
14 #include "common/ieee802_11_defs.h"
15 #include "common/wpa_ctrl.h"
16 #include "ap/sta_info.h"
17 #include "ap/hostapd.h"
18 #include "ap/ieee802_11.h"
19 #include "config_ssid.h"
20 #include "config.h"
21 #include "wpa_supplicant_i.h"
22 #include "driver_i.h"
23 #include "notify.h"
24 #include "ap.h"
25 #include "mesh_mpm.h"
26 #include "mesh_rsn.h"
27 #include "mesh.h"
28 
29 
30 static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
31 {
32 	wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh);
33 	wpa_s->ifmsh = NULL;
34 	wpa_s->current_ssid = NULL;
35 	os_free(wpa_s->mesh_rsn);
36 	wpa_s->mesh_rsn = NULL;
37 	os_free(wpa_s->mesh_params);
38 	wpa_s->mesh_params = NULL;
39 	/* TODO: leave mesh (stop beacon). This will happen on link down
40 	 * anyway, so it's not urgent */
41 }
42 
43 
44 void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
45 				      struct hostapd_iface *ifmsh)
46 {
47 	if (!ifmsh)
48 		return;
49 
50 	if (ifmsh->mconf) {
51 		mesh_mpm_deinit(wpa_s, ifmsh);
52 		if (ifmsh->mconf->rsn_ie) {
53 			ifmsh->mconf->rsn_ie = NULL;
54 			/* We cannot free this struct
55 			 * because wpa_authenticator on
56 			 * hostapd side is also using it
57 			 * for now just set to NULL and
58 			 * let hostapd code free it.
59 			 */
60 		}
61 		os_free(ifmsh->mconf);
62 		ifmsh->mconf = NULL;
63 	}
64 
65 	/* take care of shared data */
66 	hostapd_interface_deinit(ifmsh);
67 	hostapd_interface_free(ifmsh);
68 }
69 
70 
71 static struct mesh_conf * mesh_config_create(struct wpa_supplicant *wpa_s,
72 					     struct wpa_ssid *ssid)
73 {
74 	struct mesh_conf *conf;
75 	int cipher;
76 
77 	conf = os_zalloc(sizeof(struct mesh_conf));
78 	if (!conf)
79 		return NULL;
80 
81 	os_memcpy(conf->meshid, ssid->ssid, ssid->ssid_len);
82 	conf->meshid_len = ssid->ssid_len;
83 
84 	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE)
85 		conf->security |= MESH_CONF_SEC_AUTH |
86 			MESH_CONF_SEC_AMPE;
87 	else
88 		conf->security |= MESH_CONF_SEC_NONE;
89 #ifdef CONFIG_IEEE80211W
90 	conf->ieee80211w = ssid->ieee80211w;
91 	if (conf->ieee80211w == MGMT_FRAME_PROTECTION_DEFAULT) {
92 		if (wpa_s->drv_enc & WPA_DRIVER_CAPA_ENC_BIP)
93 			conf->ieee80211w = wpa_s->conf->pmf;
94 		else
95 			conf->ieee80211w = NO_MGMT_FRAME_PROTECTION;
96 	}
97 #endif /* CONFIG_IEEE80211W */
98 #ifdef CONFIG_OCV
99 	conf->ocv = ssid->ocv;
100 #endif /* CONFIG_OCV */
101 
102 	cipher = wpa_pick_pairwise_cipher(ssid->pairwise_cipher, 0);
103 	if (cipher < 0 || cipher == WPA_CIPHER_TKIP) {
104 		wpa_msg(wpa_s, MSG_INFO, "mesh: Invalid pairwise cipher");
105 		os_free(conf);
106 		return NULL;
107 	}
108 	conf->pairwise_cipher = cipher;
109 
110 	cipher = wpa_pick_group_cipher(ssid->group_cipher);
111 	if (cipher < 0 || cipher == WPA_CIPHER_TKIP ||
112 	    cipher == WPA_CIPHER_GTK_NOT_USED) {
113 		wpa_msg(wpa_s, MSG_INFO, "mesh: Invalid group cipher");
114 		os_free(conf);
115 		return NULL;
116 	}
117 
118 	conf->group_cipher = cipher;
119 	if (conf->ieee80211w != NO_MGMT_FRAME_PROTECTION)
120 		conf->mgmt_group_cipher = WPA_CIPHER_AES_128_CMAC;
121 
122 	/* defaults */
123 	conf->mesh_pp_id = MESH_PATH_PROTOCOL_HWMP;
124 	conf->mesh_pm_id = MESH_PATH_METRIC_AIRTIME;
125 	conf->mesh_cc_id = 0;
126 	conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
127 	conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
128 	conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
129 	conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
130 	conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
131 	conf->dot11MeshHoldingTimeout = ssid->dot11MeshHoldingTimeout;
132 
133 	return conf;
134 }
135 
136 
137 static void wpas_mesh_copy_groups(struct hostapd_data *bss,
138 				  struct wpa_supplicant *wpa_s)
139 {
140 	int num_groups;
141 	size_t groups_size;
142 
143 	for (num_groups = 0; wpa_s->conf->sae_groups[num_groups] > 0;
144 	     num_groups++)
145 		;
146 
147 	groups_size = (num_groups + 1) * sizeof(wpa_s->conf->sae_groups[0]);
148 	bss->conf->sae_groups = os_malloc(groups_size);
149 	if (bss->conf->sae_groups)
150 		os_memcpy(bss->conf->sae_groups, wpa_s->conf->sae_groups,
151 			  groups_size);
152 }
153 
154 
155 static int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s)
156 {
157 	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
158 	struct wpa_ssid *ssid = wpa_s->current_ssid;
159 	struct hostapd_data *bss = ifmsh->bss[0];
160 	static int default_groups[] = { 19, 20, 21, 25, 26, -1 };
161 	const char *password;
162 	size_t len;
163 
164 	password = ssid->sae_password;
165 	if (!password)
166 		password = ssid->passphrase;
167 	if (!password) {
168 		wpa_printf(MSG_ERROR,
169 			   "mesh: Passphrase for SAE not configured");
170 		return -1;
171 	}
172 
173 	bss->conf->wpa = ssid->proto;
174 	bss->conf->wpa_key_mgmt = ssid->key_mgmt;
175 
176 	if (wpa_s->conf->sae_groups && wpa_s->conf->sae_groups[0] > 0) {
177 		wpas_mesh_copy_groups(bss, wpa_s);
178 	} else {
179 		bss->conf->sae_groups = os_memdup(default_groups,
180 						  sizeof(default_groups));
181 		if (!bss->conf->sae_groups)
182 			return -1;
183 	}
184 
185 	len = os_strlen(password);
186 	bss->conf->ssid.wpa_passphrase = dup_binstr(password, len);
187 
188 	wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, ifmsh->mconf);
189 	return !wpa_s->mesh_rsn ? -1 : 0;
190 }
191 
192 
193 static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
194 {
195 	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
196 	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
197 	struct wpa_ssid *ssid = wpa_s->current_ssid;
198 	int ret;
199 
200 	if (!params || !ssid || !ifmsh) {
201 		wpa_printf(MSG_ERROR, "mesh: %s called without active mesh",
202 			   __func__);
203 		return -1;
204 	}
205 
206 	if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
207 	    wpas_mesh_init_rsn(wpa_s)) {
208 		wpa_printf(MSG_ERROR,
209 			   "mesh: RSN initialization failed - deinit mesh");
210 		wpa_supplicant_mesh_deinit(wpa_s);
211 		wpa_drv_leave_mesh(wpa_s);
212 		return -1;
213 	}
214 
215 	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
216 		wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
217 		wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
218 		wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
219 	}
220 
221 	params->ies = ifmsh->mconf->rsn_ie;
222 	params->ie_len = ifmsh->mconf->rsn_ie_len;
223 	params->basic_rates = ifmsh->basic_rates;
224 	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
225 	params->conf.ht_opmode = ifmsh->bss[0]->iface->ht_op_mode;
226 
227 	wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
228 		wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
229 	ret = wpa_drv_join_mesh(wpa_s, params);
230 	if (ret)
231 		wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d", ret);
232 
233 	/* hostapd sets the interface down until we associate */
234 	wpa_drv_set_operstate(wpa_s, 1);
235 
236 	if (!ret)
237 		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
238 
239 	return ret;
240 }
241 
242 
243 static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
244 				    struct wpa_ssid *ssid,
245 				    struct hostapd_freq_params *freq)
246 {
247 	struct hostapd_iface *ifmsh;
248 	struct hostapd_data *bss;
249 	struct hostapd_config *conf;
250 	struct mesh_conf *mconf;
251 	int basic_rates_erp[] = { 10, 20, 55, 60, 110, 120, 240, -1 };
252 	int rate_len;
253 	int frequency;
254 
255 	if (!wpa_s->conf->user_mpm) {
256 		/* not much for us to do here */
257 		wpa_msg(wpa_s, MSG_WARNING,
258 			"user_mpm is not enabled in configuration");
259 		return 0;
260 	}
261 
262 	wpa_s->ifmsh = ifmsh = hostapd_alloc_iface();
263 	if (!ifmsh)
264 		return -ENOMEM;
265 
266 	ifmsh->drv_flags = wpa_s->drv_flags;
267 	ifmsh->num_bss = 1;
268 	ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
269 			       sizeof(struct hostapd_data *));
270 	if (!ifmsh->bss)
271 		goto out_free;
272 
273 	ifmsh->bss[0] = bss = hostapd_alloc_bss_data(NULL, NULL, NULL);
274 	if (!bss)
275 		goto out_free;
276 
277 	ifmsh->bss[0]->msg_ctx = wpa_s;
278 	os_memcpy(bss->own_addr, wpa_s->own_addr, ETH_ALEN);
279 	bss->driver = wpa_s->driver;
280 	bss->drv_priv = wpa_s->drv_priv;
281 	bss->iface = ifmsh;
282 	bss->mesh_sta_free_cb = mesh_mpm_free_sta;
283 	frequency = ssid->frequency;
284 	if (frequency != freq->freq &&
285 	    frequency == freq->freq + freq->sec_channel_offset * 20) {
286 		wpa_printf(MSG_DEBUG, "mesh: pri/sec channels switched");
287 		frequency = freq->freq;
288 	}
289 	wpa_s->assoc_freq = frequency;
290 	wpa_s->current_ssid = ssid;
291 
292 	/* setup an AP config for auth processing */
293 	conf = hostapd_config_defaults();
294 	if (!conf)
295 		goto out_free;
296 
297 	bss->conf = *conf->bss;
298 	bss->conf->start_disabled = 1;
299 	bss->conf->mesh = MESH_ENABLED;
300 	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
301 
302 	if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
303 			     wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
304 		conf->ieee80211h = 1;
305 		conf->ieee80211d = 1;
306 		conf->country[0] = wpa_s->conf->country[0];
307 		conf->country[1] = wpa_s->conf->country[1];
308 		conf->country[2] = ' ';
309 	}
310 
311 	bss->iconf = conf;
312 	ifmsh->conf = conf;
313 
314 	ifmsh->bss[0]->max_plinks = wpa_s->conf->max_peer_links;
315 	ifmsh->bss[0]->dot11RSNASAERetransPeriod =
316 		wpa_s->conf->dot11RSNASAERetransPeriod;
317 	os_strlcpy(bss->conf->iface, wpa_s->ifname, sizeof(bss->conf->iface));
318 
319 	mconf = mesh_config_create(wpa_s, ssid);
320 	if (!mconf)
321 		goto out_free;
322 	ifmsh->mconf = mconf;
323 
324 	/* need conf->hw_mode for supported rates. */
325 	conf->hw_mode = ieee80211_freq_to_chan(frequency, &conf->channel);
326 	if (conf->hw_mode == NUM_HOSTAPD_MODES) {
327 		wpa_printf(MSG_ERROR, "Unsupported mesh mode frequency: %d MHz",
328 			   frequency);
329 		goto out_free;
330 	}
331 	if (ssid->ht40)
332 		conf->secondary_channel = ssid->ht40;
333 	if (conf->hw_mode == HOSTAPD_MODE_IEEE80211A && ssid->vht) {
334 		if (ssid->max_oper_chwidth != DEFAULT_MAX_OPER_CHWIDTH)
335 			conf->vht_oper_chwidth = ssid->max_oper_chwidth;
336 		switch (conf->vht_oper_chwidth) {
337 		case CHANWIDTH_80MHZ:
338 		case CHANWIDTH_80P80MHZ:
339 			ieee80211_freq_to_chan(
340 				frequency,
341 				&conf->vht_oper_centr_freq_seg0_idx);
342 			conf->vht_oper_centr_freq_seg0_idx += ssid->ht40 * 2;
343 			break;
344 		case CHANWIDTH_160MHZ:
345 			ieee80211_freq_to_chan(
346 				frequency,
347 				&conf->vht_oper_centr_freq_seg0_idx);
348 			conf->vht_oper_centr_freq_seg0_idx += ssid->ht40 * 2;
349 			conf->vht_oper_centr_freq_seg0_idx += 40 / 5;
350 			break;
351 		}
352 		ieee80211_freq_to_chan(ssid->vht_center_freq2,
353 				       &conf->vht_oper_centr_freq_seg1_idx);
354 	}
355 
356 	if (ssid->mesh_basic_rates == NULL) {
357 		/*
358 		 * XXX: Hack! This is so an MPM which correctly sets the ERP
359 		 * mandatory rates as BSSBasicRateSet doesn't reject us. We
360 		 * could add a new hw_mode HOSTAPD_MODE_IEEE80211G_ERP, but
361 		 * this is way easier. This also makes our BSSBasicRateSet
362 		 * advertised in beacons match the one in peering frames, sigh.
363 		 */
364 		if (conf->hw_mode == HOSTAPD_MODE_IEEE80211G) {
365 			conf->basic_rates = os_memdup(basic_rates_erp,
366 						      sizeof(basic_rates_erp));
367 			if (!conf->basic_rates)
368 				goto out_free;
369 		}
370 	} else {
371 		rate_len = 0;
372 		while (1) {
373 			if (ssid->mesh_basic_rates[rate_len] < 1)
374 				break;
375 			rate_len++;
376 		}
377 		conf->basic_rates = os_calloc(rate_len + 1, sizeof(int));
378 		if (conf->basic_rates == NULL)
379 			goto out_free;
380 		os_memcpy(conf->basic_rates, ssid->mesh_basic_rates,
381 			  rate_len * sizeof(int));
382 		conf->basic_rates[rate_len] = -1;
383 	}
384 
385 	if (wpa_drv_init_mesh(wpa_s)) {
386 		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
387 		return -1;
388 	}
389 
390 	if (hostapd_setup_interface(ifmsh)) {
391 		wpa_printf(MSG_ERROR,
392 			   "Failed to initialize hostapd interface for mesh");
393 		return -1;
394 	}
395 
396 	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
397 
398 	return 0;
399 out_free:
400 	wpa_supplicant_mesh_deinit(wpa_s);
401 	return -ENOMEM;
402 }
403 
404 
405 void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
406 			  const u8 *ies, size_t ie_len)
407 {
408 	struct ieee802_11_elems elems;
409 
410 	wpa_msg(wpa_s, MSG_INFO,
411 		"new peer notification for " MACSTR, MAC2STR(addr));
412 
413 	if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) {
414 		wpa_msg(wpa_s, MSG_INFO, "Could not parse beacon from " MACSTR,
415 			MAC2STR(addr));
416 		return;
417 	}
418 	wpa_mesh_new_mesh_peer(wpa_s, addr, &elems);
419 }
420 
421 
422 void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
423 				     struct wpabuf **extra_ie)
424 {
425 	/* EID + 0-length (wildcard) mesh-id */
426 	size_t ielen = 2;
427 
428 	if (wpabuf_resize(extra_ie, ielen) == 0) {
429 		wpabuf_put_u8(*extra_ie, WLAN_EID_MESH_ID);
430 		wpabuf_put_u8(*extra_ie, 0);
431 	}
432 }
433 
434 
435 int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
436 			     struct wpa_ssid *ssid)
437 {
438 	struct wpa_driver_mesh_join_params *params = os_zalloc(sizeof(*params));
439 	int ret = 0;
440 
441 	if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency ||
442 	    !params) {
443 		ret = -ENOENT;
444 		os_free(params);
445 		goto out;
446 	}
447 
448 	wpa_supplicant_mesh_deinit(wpa_s);
449 
450 	wpa_s->pairwise_cipher = WPA_CIPHER_NONE;
451 	wpa_s->group_cipher = WPA_CIPHER_NONE;
452 	wpa_s->mgmt_group_cipher = 0;
453 
454 	params->meshid = ssid->ssid;
455 	params->meshid_len = ssid->ssid_len;
456 	ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
457 	wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
458 	wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;
459 	wpa_s->mesh_he_enabled = !!params->freq.he_enabled;
460 	if (params->freq.ht_enabled && params->freq.sec_channel_offset)
461 		ssid->ht40 = params->freq.sec_channel_offset;
462 
463 	if (wpa_s->mesh_vht_enabled) {
464 		ssid->vht = 1;
465 		ssid->vht_center_freq1 = params->freq.center_freq1;
466 		switch (params->freq.bandwidth) {
467 		case 80:
468 			if (params->freq.center_freq2) {
469 				ssid->max_oper_chwidth = CHANWIDTH_80P80MHZ;
470 				ssid->vht_center_freq2 =
471 					params->freq.center_freq2;
472 			} else {
473 				ssid->max_oper_chwidth = CHANWIDTH_80MHZ;
474 			}
475 			break;
476 		case 160:
477 			ssid->max_oper_chwidth = CHANWIDTH_160MHZ;
478 			break;
479 		default:
480 			ssid->max_oper_chwidth = CHANWIDTH_USE_HT;
481 			break;
482 		}
483 	}
484 	if (wpa_s->mesh_he_enabled)
485 		ssid->he = 1;
486 	if (ssid->beacon_int > 0)
487 		params->beacon_int = ssid->beacon_int;
488 	else if (wpa_s->conf->beacon_int > 0)
489 		params->beacon_int = wpa_s->conf->beacon_int;
490 	if (ssid->dtim_period > 0)
491 		params->dtim_period = ssid->dtim_period;
492 	else if (wpa_s->conf->dtim_period > 0)
493 		params->dtim_period = wpa_s->conf->dtim_period;
494 	params->conf.max_peer_links = wpa_s->conf->max_peer_links;
495 	if (ssid->mesh_rssi_threshold < DEFAULT_MESH_RSSI_THRESHOLD) {
496 		params->conf.rssi_threshold = ssid->mesh_rssi_threshold;
497 		params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
498 	}
499 
500 	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
501 		params->flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
502 		params->flags |= WPA_DRIVER_MESH_FLAG_AMPE;
503 		wpa_s->conf->user_mpm = 1;
504 	}
505 
506 	if (wpa_s->conf->user_mpm) {
507 		params->flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
508 		params->conf.auto_plinks = 0;
509 	} else {
510 		params->flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
511 		params->conf.auto_plinks = 1;
512 	}
513 	params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
514 
515 	os_free(wpa_s->mesh_params);
516 	wpa_s->mesh_params = params;
517 	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
518 		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
519 		wpa_drv_leave_mesh(wpa_s);
520 		ret = -1;
521 		goto out;
522 	}
523 
524 	ret = wpas_mesh_complete(wpa_s);
525 out:
526 	return ret;
527 }
528 
529 
530 int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s)
531 {
532 	int ret = 0;
533 
534 	wpa_msg(wpa_s, MSG_INFO, "leaving mesh");
535 
536 	/* Need to send peering close messages first */
537 	wpa_supplicant_mesh_deinit(wpa_s);
538 
539 	ret = wpa_drv_leave_mesh(wpa_s);
540 	if (ret)
541 		wpa_msg(wpa_s, MSG_ERROR, "mesh leave error=%d", ret);
542 
543 	wpa_drv_set_operstate(wpa_s, 1);
544 
545 	return ret;
546 }
547 
548 
549 static int mesh_attr_text(const u8 *ies, size_t ies_len, char *buf, char *end)
550 {
551 	struct ieee802_11_elems elems;
552 	char *mesh_id, *pos = buf;
553 	u8 *bss_basic_rate_set;
554 	int bss_basic_rate_set_len, ret, i;
555 
556 	if (ieee802_11_parse_elems(ies, ies_len, &elems, 0) == ParseFailed)
557 		return -1;
558 
559 	if (elems.mesh_id_len < 1)
560 		return 0;
561 
562 	mesh_id = os_malloc(elems.mesh_id_len + 1);
563 	if (mesh_id == NULL)
564 		return -1;
565 
566 	os_memcpy(mesh_id, elems.mesh_id, elems.mesh_id_len);
567 	mesh_id[elems.mesh_id_len] = '\0';
568 	ret = os_snprintf(pos, end - pos, "mesh_id=%s\n", mesh_id);
569 	os_free(mesh_id);
570 	if (os_snprintf_error(end - pos, ret))
571 		return pos - buf;
572 	pos += ret;
573 
574 	if (elems.mesh_config_len > 6) {
575 		ret = os_snprintf(pos, end - pos,
576 				  "active_path_selection_protocol_id=0x%02x\n"
577 				  "active_path_selection_metric_id=0x%02x\n"
578 				  "congestion_control_mode_id=0x%02x\n"
579 				  "synchronization_method_id=0x%02x\n"
580 				  "authentication_protocol_id=0x%02x\n"
581 				  "mesh_formation_info=0x%02x\n"
582 				  "mesh_capability=0x%02x\n",
583 				  elems.mesh_config[0], elems.mesh_config[1],
584 				  elems.mesh_config[2], elems.mesh_config[3],
585 				  elems.mesh_config[4], elems.mesh_config[5],
586 				  elems.mesh_config[6]);
587 		if (os_snprintf_error(end - pos, ret))
588 			return pos - buf;
589 		pos += ret;
590 	}
591 
592 	bss_basic_rate_set = os_malloc(elems.supp_rates_len +
593 		elems.ext_supp_rates_len);
594 	if (bss_basic_rate_set == NULL)
595 		return -1;
596 
597 	bss_basic_rate_set_len = 0;
598 	for (i = 0; i < elems.supp_rates_len; i++) {
599 		if (elems.supp_rates[i] & 0x80) {
600 			bss_basic_rate_set[bss_basic_rate_set_len++] =
601 				(elems.supp_rates[i] & 0x7f) * 5;
602 		}
603 	}
604 	for (i = 0; i < elems.ext_supp_rates_len; i++) {
605 		if (elems.ext_supp_rates[i] & 0x80) {
606 			bss_basic_rate_set[bss_basic_rate_set_len++] =
607 				(elems.ext_supp_rates[i] & 0x7f) * 5;
608 		}
609 	}
610 	if (bss_basic_rate_set_len > 0) {
611 		ret = os_snprintf(pos, end - pos, "bss_basic_rate_set=%d",
612 				  bss_basic_rate_set[0]);
613 		if (os_snprintf_error(end - pos, ret))
614 			goto fail;
615 		pos += ret;
616 
617 		for (i = 1; i < bss_basic_rate_set_len; i++) {
618 			ret = os_snprintf(pos, end - pos, " %d",
619 					  bss_basic_rate_set[i]);
620 			if (os_snprintf_error(end - pos, ret))
621 				goto fail;
622 			pos += ret;
623 		}
624 
625 		ret = os_snprintf(pos, end - pos, "\n");
626 		if (os_snprintf_error(end - pos, ret))
627 			goto fail;
628 		pos += ret;
629 	}
630 fail:
631 	os_free(bss_basic_rate_set);
632 
633 	return pos - buf;
634 }
635 
636 
637 int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
638 			       char *end)
639 {
640 	return mesh_attr_text(ies, ies_len, buf, end);
641 }
642 
643 
644 static int wpas_mesh_get_ifname(struct wpa_supplicant *wpa_s, char *ifname,
645 				size_t len)
646 {
647 	char *ifname_ptr = wpa_s->ifname;
648 	int res;
649 
650 	res = os_snprintf(ifname, len, "mesh-%s-%d", ifname_ptr,
651 			  wpa_s->mesh_if_idx);
652 	if (os_snprintf_error(len, res) ||
653 	    (os_strlen(ifname) >= IFNAMSIZ &&
654 	     os_strlen(wpa_s->ifname) < IFNAMSIZ)) {
655 		/* Try to avoid going over the IFNAMSIZ length limit */
656 		res = os_snprintf(ifname, len, "mesh-%d", wpa_s->mesh_if_idx);
657 		if (os_snprintf_error(len, res))
658 			return -1;
659 	}
660 	wpa_s->mesh_if_idx++;
661 	return 0;
662 }
663 
664 
665 int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
666 			    size_t len)
667 {
668 	struct wpa_interface iface;
669 	struct wpa_supplicant *mesh_wpa_s;
670 	u8 addr[ETH_ALEN];
671 
672 	if (ifname[0] == '\0' && wpas_mesh_get_ifname(wpa_s, ifname, len) < 0)
673 		return -1;
674 
675 	if (wpa_drv_if_add(wpa_s, WPA_IF_MESH, ifname, NULL, NULL, NULL, addr,
676 			   NULL) < 0) {
677 		wpa_printf(MSG_ERROR,
678 			   "mesh: Failed to create new mesh interface");
679 		return -1;
680 	}
681 	wpa_printf(MSG_INFO, "mesh: Created virtual interface %s addr "
682 		   MACSTR, ifname, MAC2STR(addr));
683 
684 	os_memset(&iface, 0, sizeof(iface));
685 	iface.ifname = ifname;
686 	iface.driver = wpa_s->driver->name;
687 	iface.driver_param = wpa_s->conf->driver_param;
688 	iface.ctrl_interface = wpa_s->conf->ctrl_interface;
689 
690 	mesh_wpa_s = wpa_supplicant_add_iface(wpa_s->global, &iface, wpa_s);
691 	if (!mesh_wpa_s) {
692 		wpa_printf(MSG_ERROR,
693 			   "mesh: Failed to create new wpa_supplicant interface");
694 		wpa_drv_if_remove(wpa_s, WPA_IF_MESH, ifname);
695 		return -1;
696 	}
697 	mesh_wpa_s->mesh_if_created = 1;
698 	return 0;
699 }
700 
701 
702 int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr)
703 {
704 	return mesh_mpm_close_peer(wpa_s, addr);
705 }
706 
707 
708 int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
709 		       int duration)
710 {
711 	return mesh_mpm_connect_peer(wpa_s, addr, duration);
712 }
713