xref: /dragonfly/crypto/openssh/clientloop.c (revision 8af44722)
1 /* $OpenBSD: clientloop.c,v 1.322 2019/03/29 11:31:40 djm Exp $ */
2 /*
3  * Author: Tatu Ylonen <ylo@cs.hut.fi>
4  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
5  *                    All rights reserved
6  * The main loop for the interactive session (client side).
7  *
8  * As far as I am concerned, the code I have written for this software
9  * can be used freely for any purpose.  Any derived versions of this
10  * software must be clearly marked as such, and if the derived work is
11  * incompatible with the protocol description in the RFC file, it must be
12  * called by a name other than "ssh" or "Secure Shell".
13  *
14  *
15  * Copyright (c) 1999 Theo de Raadt.  All rights reserved.
16  *
17  * Redistribution and use in source and binary forms, with or without
18  * modification, are permitted provided that the following conditions
19  * are met:
20  * 1. Redistributions of source code must retain the above copyright
21  *    notice, this list of conditions and the following disclaimer.
22  * 2. Redistributions in binary form must reproduce the above copyright
23  *    notice, this list of conditions and the following disclaimer in the
24  *    documentation and/or other materials provided with the distribution.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
27  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
28  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
29  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
30  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
31  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
32  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
33  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
34  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
35  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36  *
37  *
38  * SSH2 support added by Markus Friedl.
39  * Copyright (c) 1999, 2000, 2001 Markus Friedl.  All rights reserved.
40  *
41  * Redistribution and use in source and binary forms, with or without
42  * modification, are permitted provided that the following conditions
43  * are met:
44  * 1. Redistributions of source code must retain the above copyright
45  *    notice, this list of conditions and the following disclaimer.
46  * 2. Redistributions in binary form must reproduce the above copyright
47  *    notice, this list of conditions and the following disclaimer in the
48  *    documentation and/or other materials provided with the distribution.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
51  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
52  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
53  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
54  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
55  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
56  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
57  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
58  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
59  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
60  */
61 
62 #include "includes.h"
63 
64 #include <sys/types.h>
65 #include <sys/ioctl.h>
66 #ifdef HAVE_SYS_STAT_H
67 # include <sys/stat.h>
68 #endif
69 #ifdef HAVE_SYS_TIME_H
70 # include <sys/time.h>
71 #endif
72 #include <sys/socket.h>
73 
74 #include <ctype.h>
75 #include <errno.h>
76 #ifdef HAVE_PATHS_H
77 #include <paths.h>
78 #endif
79 #include <signal.h>
80 #include <stdarg.h>
81 #include <stdio.h>
82 #include <stdlib.h>
83 #include <string.h>
84 #include <termios.h>
85 #include <pwd.h>
86 #include <unistd.h>
87 #include <limits.h>
88 
89 #include "openbsd-compat/sys-queue.h"
90 #include "xmalloc.h"
91 #include "ssh.h"
92 #include "ssh2.h"
93 #include "packet.h"
94 #include "sshbuf.h"
95 #include "compat.h"
96 #include "channels.h"
97 #include "dispatch.h"
98 #include "sshkey.h"
99 #include "cipher.h"
100 #include "kex.h"
101 #include "myproposal.h"
102 #include "log.h"
103 #include "misc.h"
104 #include "readconf.h"
105 #include "clientloop.h"
106 #include "sshconnect.h"
107 #include "authfd.h"
108 #include "atomicio.h"
109 #include "sshpty.h"
110 #include "match.h"
111 #include "msg.h"
112 #include "ssherr.h"
113 #include "hostfile.h"
114 
115 /* import options */
116 extern Options options;
117 
118 /* Flag indicating that stdin should be redirected from /dev/null. */
119 extern int stdin_null_flag;
120 
121 /* Flag indicating that no shell has been requested */
122 extern int no_shell_flag;
123 
124 /* Flag indicating that ssh should daemonise after authentication is complete */
125 extern int fork_after_authentication_flag;
126 
127 /* Control socket */
128 extern int muxserver_sock; /* XXX use mux_client_cleanup() instead */
129 
130 /*
131  * Name of the host we are connecting to.  This is the name given on the
132  * command line, or the HostName specified for the user-supplied name in a
133  * configuration file.
134  */
135 extern char *host;
136 
137 /*
138  * Flag to indicate that we have received a window change signal which has
139  * not yet been processed.  This will cause a message indicating the new
140  * window size to be sent to the server a little later.  This is volatile
141  * because this is updated in a signal handler.
142  */
143 static volatile sig_atomic_t received_window_change_signal = 0;
144 static volatile sig_atomic_t received_signal = 0;
145 
146 /* Flag indicating whether the user's terminal is in non-blocking mode. */
147 static int in_non_blocking_mode = 0;
148 
149 /* Time when backgrounded control master using ControlPersist should exit */
150 static time_t control_persist_exit_time = 0;
151 
152 /* Common data for the client loop code. */
153 volatile sig_atomic_t quit_pending; /* Set non-zero to quit the loop. */
154 static int last_was_cr;		/* Last character was a newline. */
155 static int exit_status;		/* Used to store the command exit status. */
156 static struct sshbuf *stderr_buffer;	/* Used for final exit message. */
157 static int connection_in;	/* Connection to server (input). */
158 static int connection_out;	/* Connection to server (output). */
159 static int need_rekeying;	/* Set to non-zero if rekeying is requested. */
160 static int session_closed;	/* In SSH2: login session closed. */
161 static u_int x11_refuse_time;	/* If >0, refuse x11 opens after this time. */
162 
163 static void client_init_dispatch(struct ssh *ssh);
164 int	session_ident = -1;
165 
166 /* Track escape per proto2 channel */
167 struct escape_filter_ctx {
168 	int escape_pending;
169 	int escape_char;
170 };
171 
172 /* Context for channel confirmation replies */
173 struct channel_reply_ctx {
174 	const char *request_type;
175 	int id;
176 	enum confirm_action action;
177 };
178 
179 /* Global request success/failure callbacks */
180 /* XXX move to struct ssh? */
181 struct global_confirm {
182 	TAILQ_ENTRY(global_confirm) entry;
183 	global_confirm_cb *cb;
184 	void *ctx;
185 	int ref_count;
186 };
187 TAILQ_HEAD(global_confirms, global_confirm);
188 static struct global_confirms global_confirms =
189     TAILQ_HEAD_INITIALIZER(global_confirms);
190 
191 void ssh_process_session2_setup(int, int, int, struct sshbuf *);
192 
193 /* Restores stdin to blocking mode. */
194 
195 static void
196 leave_non_blocking(void)
197 {
198 	if (in_non_blocking_mode) {
199 		unset_nonblock(fileno(stdin));
200 		in_non_blocking_mode = 0;
201 	}
202 }
203 
204 /*
205  * Signal handler for the window change signal (SIGWINCH).  This just sets a
206  * flag indicating that the window has changed.
207  */
208 /*ARGSUSED */
209 static void
210 window_change_handler(int sig)
211 {
212 	received_window_change_signal = 1;
213 }
214 
215 /*
216  * Signal handler for signals that cause the program to terminate.  These
217  * signals must be trapped to restore terminal modes.
218  */
219 /*ARGSUSED */
220 static void
221 signal_handler(int sig)
222 {
223 	received_signal = sig;
224 	quit_pending = 1;
225 }
226 
227 /*
228  * Sets control_persist_exit_time to the absolute time when the
229  * backgrounded control master should exit due to expiry of the
230  * ControlPersist timeout.  Sets it to 0 if we are not a backgrounded
231  * control master process, or if there is no ControlPersist timeout.
232  */
233 static void
234 set_control_persist_exit_time(struct ssh *ssh)
235 {
236 	if (muxserver_sock == -1 || !options.control_persist
237 	    || options.control_persist_timeout == 0) {
238 		/* not using a ControlPersist timeout */
239 		control_persist_exit_time = 0;
240 	} else if (channel_still_open(ssh)) {
241 		/* some client connections are still open */
242 		if (control_persist_exit_time > 0)
243 			debug2("%s: cancel scheduled exit", __func__);
244 		control_persist_exit_time = 0;
245 	} else if (control_persist_exit_time <= 0) {
246 		/* a client connection has recently closed */
247 		control_persist_exit_time = monotime() +
248 			(time_t)options.control_persist_timeout;
249 		debug2("%s: schedule exit in %d seconds", __func__,
250 		    options.control_persist_timeout);
251 	}
252 	/* else we are already counting down to the timeout */
253 }
254 
255 #define SSH_X11_VALID_DISPLAY_CHARS ":/.-_"
256 static int
257 client_x11_display_valid(const char *display)
258 {
259 	size_t i, dlen;
260 
261 	if (display == NULL)
262 		return 0;
263 
264 	dlen = strlen(display);
265 	for (i = 0; i < dlen; i++) {
266 		if (!isalnum((u_char)display[i]) &&
267 		    strchr(SSH_X11_VALID_DISPLAY_CHARS, display[i]) == NULL) {
268 			debug("Invalid character '%c' in DISPLAY", display[i]);
269 			return 0;
270 		}
271 	}
272 	return 1;
273 }
274 
275 #define SSH_X11_PROTO		"MIT-MAGIC-COOKIE-1"
276 #define X11_TIMEOUT_SLACK	60
277 int
278 client_x11_get_proto(struct ssh *ssh, const char *display,
279     const char *xauth_path, u_int trusted, u_int timeout,
280     char **_proto, char **_data)
281 {
282 	char *cmd, line[512], xdisplay[512];
283 	char xauthfile[PATH_MAX], xauthdir[PATH_MAX];
284 	static char proto[512], data[512];
285 	FILE *f;
286 	int got_data = 0, generated = 0, do_unlink = 0, r;
287 	struct stat st;
288 	u_int now, x11_timeout_real;
289 
290 	*_proto = proto;
291 	*_data = data;
292 	proto[0] = data[0] = xauthfile[0] = xauthdir[0] = '\0';
293 
294 	if (!client_x11_display_valid(display)) {
295 		if (display != NULL)
296 			logit("DISPLAY \"%s\" invalid; disabling X11 forwarding",
297 			    display);
298 		return -1;
299 	}
300 	if (xauth_path != NULL && stat(xauth_path, &st) == -1) {
301 		debug("No xauth program.");
302 		xauth_path = NULL;
303 	}
304 
305 	if (xauth_path != NULL) {
306 		/*
307 		 * Handle FamilyLocal case where $DISPLAY does
308 		 * not match an authorization entry.  For this we
309 		 * just try "xauth list unix:displaynum.screennum".
310 		 * XXX: "localhost" match to determine FamilyLocal
311 		 *      is not perfect.
312 		 */
313 		if (strncmp(display, "localhost:", 10) == 0) {
314 			if ((r = snprintf(xdisplay, sizeof(xdisplay), "unix:%s",
315 			    display + 10)) < 0 ||
316 			    (size_t)r >= sizeof(xdisplay)) {
317 				error("%s: display name too long", __func__);
318 				return -1;
319 			}
320 			display = xdisplay;
321 		}
322 		if (trusted == 0) {
323 			/*
324 			 * Generate an untrusted X11 auth cookie.
325 			 *
326 			 * The authentication cookie should briefly outlive
327 			 * ssh's willingness to forward X11 connections to
328 			 * avoid nasty fail-open behaviour in the X server.
329 			 */
330 			mktemp_proto(xauthdir, sizeof(xauthdir));
331 			if (mkdtemp(xauthdir) == NULL) {
332 				error("%s: mkdtemp: %s",
333 				    __func__, strerror(errno));
334 				return -1;
335 			}
336 			do_unlink = 1;
337 			if ((r = snprintf(xauthfile, sizeof(xauthfile),
338 			    "%s/xauthfile", xauthdir)) < 0 ||
339 			    (size_t)r >= sizeof(xauthfile)) {
340 				error("%s: xauthfile path too long", __func__);
341 				unlink(xauthfile);
342 				rmdir(xauthdir);
343 				return -1;
344 			}
345 
346 			if (timeout == 0) {
347 				/* auth doesn't time out */
348 				xasprintf(&cmd, "%s -f %s generate %s %s "
349 				    "untrusted 2>%s",
350 				    xauth_path, xauthfile, display,
351 				    SSH_X11_PROTO, _PATH_DEVNULL);
352 			} else {
353 				/* Add some slack to requested expiry */
354 				if (timeout < UINT_MAX - X11_TIMEOUT_SLACK)
355 					x11_timeout_real = timeout +
356 					    X11_TIMEOUT_SLACK;
357 				else {
358 					/* Don't overflow on long timeouts */
359 					x11_timeout_real = UINT_MAX;
360 				}
361 				xasprintf(&cmd, "%s -f %s generate %s %s "
362 				    "untrusted timeout %u 2>%s",
363 				    xauth_path, xauthfile, display,
364 				    SSH_X11_PROTO, x11_timeout_real,
365 				    _PATH_DEVNULL);
366 			}
367 			debug2("%s: xauth command: %s", __func__, cmd);
368 
369 			if (timeout != 0 && x11_refuse_time == 0) {
370 				now = monotime() + 1;
371 				if (UINT_MAX - timeout < now)
372 					x11_refuse_time = UINT_MAX;
373 				else
374 					x11_refuse_time = now + timeout;
375 				channel_set_x11_refuse_time(ssh,
376 				    x11_refuse_time);
377 			}
378 			if (system(cmd) == 0)
379 				generated = 1;
380 			free(cmd);
381 		}
382 
383 		/*
384 		 * When in untrusted mode, we read the cookie only if it was
385 		 * successfully generated as an untrusted one in the step
386 		 * above.
387 		 */
388 		if (trusted || generated) {
389 			xasprintf(&cmd,
390 			    "%s %s%s list %s 2>" _PATH_DEVNULL,
391 			    xauth_path,
392 			    generated ? "-f " : "" ,
393 			    generated ? xauthfile : "",
394 			    display);
395 			debug2("x11_get_proto: %s", cmd);
396 			f = popen(cmd, "r");
397 			if (f && fgets(line, sizeof(line), f) &&
398 			    sscanf(line, "%*s %511s %511s", proto, data) == 2)
399 				got_data = 1;
400 			if (f)
401 				pclose(f);
402 			free(cmd);
403 		}
404 	}
405 
406 	if (do_unlink) {
407 		unlink(xauthfile);
408 		rmdir(xauthdir);
409 	}
410 
411 	/* Don't fall back to fake X11 data for untrusted forwarding */
412 	if (!trusted && !got_data) {
413 		error("Warning: untrusted X11 forwarding setup failed: "
414 		    "xauth key data not generated");
415 		return -1;
416 	}
417 
418 	/*
419 	 * If we didn't get authentication data, just make up some
420 	 * data.  The forwarding code will check the validity of the
421 	 * response anyway, and substitute this data.  The X11
422 	 * server, however, will ignore this fake data and use
423 	 * whatever authentication mechanisms it was using otherwise
424 	 * for the local connection.
425 	 */
426 	if (!got_data) {
427 		u_int8_t rnd[16];
428 		u_int i;
429 
430 		logit("Warning: No xauth data; "
431 		    "using fake authentication data for X11 forwarding.");
432 		strlcpy(proto, SSH_X11_PROTO, sizeof proto);
433 		arc4random_buf(rnd, sizeof(rnd));
434 		for (i = 0; i < sizeof(rnd); i++) {
435 			snprintf(data + 2 * i, sizeof data - 2 * i, "%02x",
436 			    rnd[i]);
437 		}
438 	}
439 
440 	return 0;
441 }
442 
443 /*
444  * Checks if the client window has changed, and sends a packet about it to
445  * the server if so.  The actual change is detected elsewhere (by a software
446  * interrupt on Unix); this just checks the flag and sends a message if
447  * appropriate.
448  */
449 
450 static void
451 client_check_window_change(struct ssh *ssh)
452 {
453 	if (!received_window_change_signal)
454 		return;
455 	/** XXX race */
456 	received_window_change_signal = 0;
457 
458 	debug2("%s: changed", __func__);
459 
460 	channel_send_window_changes(ssh);
461 }
462 
463 static int
464 client_global_request_reply(int type, u_int32_t seq, struct ssh *ssh)
465 {
466 	struct global_confirm *gc;
467 
468 	if ((gc = TAILQ_FIRST(&global_confirms)) == NULL)
469 		return 0;
470 	if (gc->cb != NULL)
471 		gc->cb(ssh, type, seq, gc->ctx);
472 	if (--gc->ref_count <= 0) {
473 		TAILQ_REMOVE(&global_confirms, gc, entry);
474 		explicit_bzero(gc, sizeof(*gc));
475 		free(gc);
476 	}
477 
478 	ssh_packet_set_alive_timeouts(ssh, 0);
479 	return 0;
480 }
481 
482 static void
483 server_alive_check(struct ssh *ssh)
484 {
485 	int r;
486 
487 	if (ssh_packet_inc_alive_timeouts(ssh) > options.server_alive_count_max) {
488 		logit("Timeout, server %s not responding.", host);
489 		cleanup_exit(255);
490 	}
491 	if ((r = sshpkt_start(ssh, SSH2_MSG_GLOBAL_REQUEST)) != 0 ||
492 	    (r = sshpkt_put_cstring(ssh, "keepalive@openssh.com")) != 0 ||
493 	    (r = sshpkt_put_u8(ssh, 1)) != 0 ||		/* boolean: want reply */
494 	    (r = sshpkt_send(ssh)) != 0)
495 		fatal("%s: send packet: %s", __func__, ssh_err(r));
496 	/* Insert an empty placeholder to maintain ordering */
497 	client_register_global_confirm(NULL, NULL);
498 }
499 
500 /*
501  * Waits until the client can do something (some data becomes available on
502  * one of the file descriptors).
503  */
504 static void
505 client_wait_until_can_do_something(struct ssh *ssh,
506     fd_set **readsetp, fd_set **writesetp,
507     int *maxfdp, u_int *nallocp, int rekeying)
508 {
509 	struct timeval tv, *tvp;
510 	int timeout_secs;
511 	time_t minwait_secs = 0, server_alive_time = 0, now = monotime();
512 	int r, ret;
513 
514 	/* Add any selections by the channel mechanism. */
515 	channel_prepare_select(ssh, readsetp, writesetp, maxfdp,
516 	    nallocp, &minwait_secs);
517 
518 	/* channel_prepare_select could have closed the last channel */
519 	if (session_closed && !channel_still_open(ssh) &&
520 	    !ssh_packet_have_data_to_write(ssh)) {
521 		/* clear mask since we did not call select() */
522 		memset(*readsetp, 0, *nallocp);
523 		memset(*writesetp, 0, *nallocp);
524 		return;
525 	}
526 
527 	FD_SET(connection_in, *readsetp);
528 
529 	/* Select server connection if have data to write to the server. */
530 	if (ssh_packet_have_data_to_write(ssh))
531 		FD_SET(connection_out, *writesetp);
532 
533 	/*
534 	 * Wait for something to happen.  This will suspend the process until
535 	 * some selected descriptor can be read, written, or has some other
536 	 * event pending, or a timeout expires.
537 	 */
538 
539 	timeout_secs = INT_MAX; /* we use INT_MAX to mean no timeout */
540 	if (options.server_alive_interval > 0) {
541 		timeout_secs = options.server_alive_interval;
542 		server_alive_time = now + options.server_alive_interval;
543 	}
544 	if (options.rekey_interval > 0 && !rekeying)
545 		timeout_secs = MINIMUM(timeout_secs,
546 		    ssh_packet_get_rekey_timeout(ssh));
547 	set_control_persist_exit_time(ssh);
548 	if (control_persist_exit_time > 0) {
549 		timeout_secs = MINIMUM(timeout_secs,
550 			control_persist_exit_time - now);
551 		if (timeout_secs < 0)
552 			timeout_secs = 0;
553 	}
554 	if (minwait_secs != 0)
555 		timeout_secs = MINIMUM(timeout_secs, (int)minwait_secs);
556 	if (timeout_secs == INT_MAX)
557 		tvp = NULL;
558 	else {
559 		tv.tv_sec = timeout_secs;
560 		tv.tv_usec = 0;
561 		tvp = &tv;
562 	}
563 
564 	ret = select((*maxfdp)+1, *readsetp, *writesetp, NULL, tvp);
565 	if (ret < 0) {
566 		/*
567 		 * We have to clear the select masks, because we return.
568 		 * We have to return, because the mainloop checks for the flags
569 		 * set by the signal handlers.
570 		 */
571 		memset(*readsetp, 0, *nallocp);
572 		memset(*writesetp, 0, *nallocp);
573 
574 		if (errno == EINTR)
575 			return;
576 		/* Note: we might still have data in the buffers. */
577 		if ((r = sshbuf_putf(stderr_buffer,
578 		    "select: %s\r\n", strerror(errno))) != 0)
579 			fatal("%s: buffer error: %s", __func__, ssh_err(r));
580 		quit_pending = 1;
581 	} else if (ret == 0) {
582 		/*
583 		 * Timeout.  Could have been either keepalive or rekeying.
584 		 * Keepalive we check here, rekeying is checked in clientloop.
585 		 */
586 		if (server_alive_time != 0 && server_alive_time <= monotime())
587 			server_alive_check(ssh);
588 	}
589 
590 }
591 
592 static void
593 client_suspend_self(struct sshbuf *bin, struct sshbuf *bout, struct sshbuf *berr)
594 {
595 	/* Flush stdout and stderr buffers. */
596 	if (sshbuf_len(bout) > 0)
597 		atomicio(vwrite, fileno(stdout), sshbuf_mutable_ptr(bout),
598 		    sshbuf_len(bout));
599 	if (sshbuf_len(berr) > 0)
600 		atomicio(vwrite, fileno(stderr), sshbuf_mutable_ptr(berr),
601 		    sshbuf_len(berr));
602 
603 	leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
604 
605 	sshbuf_reset(bin);
606 	sshbuf_reset(bout);
607 	sshbuf_reset(berr);
608 
609 	/* Send the suspend signal to the program itself. */
610 	kill(getpid(), SIGTSTP);
611 
612 	/* Reset window sizes in case they have changed */
613 	received_window_change_signal = 1;
614 
615 	enter_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
616 }
617 
618 static void
619 client_process_net_input(struct ssh *ssh, fd_set *readset)
620 {
621 	char buf[SSH_IOBUFSZ];
622 	int r, len;
623 
624 	/*
625 	 * Read input from the server, and add any such data to the buffer of
626 	 * the packet subsystem.
627 	 */
628 	if (FD_ISSET(connection_in, readset)) {
629 		/* Read as much as possible. */
630 		len = read(connection_in, buf, sizeof(buf));
631 		if (len == 0) {
632 			/*
633 			 * Received EOF.  The remote host has closed the
634 			 * connection.
635 			 */
636 			if ((r = sshbuf_putf(stderr_buffer,
637 			    "Connection to %.300s closed by remote host.\r\n",
638 			    host)) != 0)
639 				fatal("%s: buffer error: %s",
640 				    __func__, ssh_err(r));
641 			quit_pending = 1;
642 			return;
643 		}
644 		/*
645 		 * There is a kernel bug on Solaris that causes select to
646 		 * sometimes wake up even though there is no data available.
647 		 */
648 		if (len < 0 &&
649 		    (errno == EAGAIN || errno == EINTR || errno == EWOULDBLOCK))
650 			len = 0;
651 
652 		if (len < 0) {
653 			/*
654 			 * An error has encountered.  Perhaps there is a
655 			 * network problem.
656 			 */
657 			if ((r = sshbuf_putf(stderr_buffer,
658 			    "Read from remote host %.300s: %.100s\r\n",
659 			    host, strerror(errno))) != 0)
660 				fatal("%s: buffer error: %s",
661 				    __func__, ssh_err(r));
662 			quit_pending = 1;
663 			return;
664 		}
665 		ssh_packet_process_incoming(ssh, buf, len);
666 	}
667 }
668 
669 static void
670 client_status_confirm(struct ssh *ssh, int type, Channel *c, void *ctx)
671 {
672 	struct channel_reply_ctx *cr = (struct channel_reply_ctx *)ctx;
673 	char errmsg[256];
674 	int r, tochan;
675 
676 	/*
677 	 * If a TTY was explicitly requested, then a failure to allocate
678 	 * one is fatal.
679 	 */
680 	if (cr->action == CONFIRM_TTY &&
681 	    (options.request_tty == REQUEST_TTY_FORCE ||
682 	    options.request_tty == REQUEST_TTY_YES))
683 		cr->action = CONFIRM_CLOSE;
684 
685 	/* XXX suppress on mux _client_ quietmode */
686 	tochan = options.log_level >= SYSLOG_LEVEL_ERROR &&
687 	    c->ctl_chan != -1 && c->extended_usage == CHAN_EXTENDED_WRITE;
688 
689 	if (type == SSH2_MSG_CHANNEL_SUCCESS) {
690 		debug2("%s request accepted on channel %d",
691 		    cr->request_type, c->self);
692 	} else if (type == SSH2_MSG_CHANNEL_FAILURE) {
693 		if (tochan) {
694 			snprintf(errmsg, sizeof(errmsg),
695 			    "%s request failed\r\n", cr->request_type);
696 		} else {
697 			snprintf(errmsg, sizeof(errmsg),
698 			    "%s request failed on channel %d",
699 			    cr->request_type, c->self);
700 		}
701 		/* If error occurred on primary session channel, then exit */
702 		if (cr->action == CONFIRM_CLOSE && c->self == session_ident)
703 			fatal("%s", errmsg);
704 		/*
705 		 * If error occurred on mux client, append to
706 		 * their stderr.
707 		 */
708 		if (tochan) {
709 			if ((r = sshbuf_put(c->extended, errmsg,
710 			    strlen(errmsg))) != 0)
711 				fatal("%s: buffer error %s", __func__,
712 				    ssh_err(r));
713 		} else
714 			error("%s", errmsg);
715 		if (cr->action == CONFIRM_TTY) {
716 			/*
717 			 * If a TTY allocation error occurred, then arrange
718 			 * for the correct TTY to leave raw mode.
719 			 */
720 			if (c->self == session_ident)
721 				leave_raw_mode(0);
722 			else
723 				mux_tty_alloc_failed(ssh, c);
724 		} else if (cr->action == CONFIRM_CLOSE) {
725 			chan_read_failed(ssh, c);
726 			chan_write_failed(ssh, c);
727 		}
728 	}
729 	free(cr);
730 }
731 
732 static void
733 client_abandon_status_confirm(struct ssh *ssh, Channel *c, void *ctx)
734 {
735 	free(ctx);
736 }
737 
738 void
739 client_expect_confirm(struct ssh *ssh, int id, const char *request,
740     enum confirm_action action)
741 {
742 	struct channel_reply_ctx *cr = xcalloc(1, sizeof(*cr));
743 
744 	cr->request_type = request;
745 	cr->action = action;
746 
747 	channel_register_status_confirm(ssh, id, client_status_confirm,
748 	    client_abandon_status_confirm, cr);
749 }
750 
751 void
752 client_register_global_confirm(global_confirm_cb *cb, void *ctx)
753 {
754 	struct global_confirm *gc, *last_gc;
755 
756 	/* Coalesce identical callbacks */
757 	last_gc = TAILQ_LAST(&global_confirms, global_confirms);
758 	if (last_gc && last_gc->cb == cb && last_gc->ctx == ctx) {
759 		if (++last_gc->ref_count >= INT_MAX)
760 			fatal("%s: last_gc->ref_count = %d",
761 			    __func__, last_gc->ref_count);
762 		return;
763 	}
764 
765 	gc = xcalloc(1, sizeof(*gc));
766 	gc->cb = cb;
767 	gc->ctx = ctx;
768 	gc->ref_count = 1;
769 	TAILQ_INSERT_TAIL(&global_confirms, gc, entry);
770 }
771 
772 static void
773 process_cmdline(struct ssh *ssh)
774 {
775 	void (*handler)(int);
776 	char *s, *cmd;
777 	int ok, delete = 0, local = 0, remote = 0, dynamic = 0;
778 	struct Forward fwd;
779 
780 	memset(&fwd, 0, sizeof(fwd));
781 
782 	leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
783 	handler = signal(SIGINT, SIG_IGN);
784 	cmd = s = read_passphrase("\r\nssh> ", RP_ECHO);
785 	if (s == NULL)
786 		goto out;
787 	while (isspace((u_char)*s))
788 		s++;
789 	if (*s == '-')
790 		s++;	/* Skip cmdline '-', if any */
791 	if (*s == '\0')
792 		goto out;
793 
794 	if (*s == 'h' || *s == 'H' || *s == '?') {
795 		logit("Commands:");
796 		logit("      -L[bind_address:]port:host:hostport    "
797 		    "Request local forward");
798 		logit("      -R[bind_address:]port:host:hostport    "
799 		    "Request remote forward");
800 		logit("      -D[bind_address:]port                  "
801 		    "Request dynamic forward");
802 		logit("      -KL[bind_address:]port                 "
803 		    "Cancel local forward");
804 		logit("      -KR[bind_address:]port                 "
805 		    "Cancel remote forward");
806 		logit("      -KD[bind_address:]port                 "
807 		    "Cancel dynamic forward");
808 		if (!options.permit_local_command)
809 			goto out;
810 		logit("      !args                                  "
811 		    "Execute local command");
812 		goto out;
813 	}
814 
815 	if (*s == '!' && options.permit_local_command) {
816 		s++;
817 		ssh_local_cmd(s);
818 		goto out;
819 	}
820 
821 	if (*s == 'K') {
822 		delete = 1;
823 		s++;
824 	}
825 	if (*s == 'L')
826 		local = 1;
827 	else if (*s == 'R')
828 		remote = 1;
829 	else if (*s == 'D')
830 		dynamic = 1;
831 	else {
832 		logit("Invalid command.");
833 		goto out;
834 	}
835 
836 	while (isspace((u_char)*++s))
837 		;
838 
839 	/* XXX update list of forwards in options */
840 	if (delete) {
841 		/* We pass 1 for dynamicfwd to restrict to 1 or 2 fields. */
842 		if (!parse_forward(&fwd, s, 1, 0)) {
843 			logit("Bad forwarding close specification.");
844 			goto out;
845 		}
846 		if (remote)
847 			ok = channel_request_rforward_cancel(ssh, &fwd) == 0;
848 		else if (dynamic)
849 			ok = channel_cancel_lport_listener(ssh, &fwd,
850 			    0, &options.fwd_opts) > 0;
851 		else
852 			ok = channel_cancel_lport_listener(ssh, &fwd,
853 			    CHANNEL_CANCEL_PORT_STATIC,
854 			    &options.fwd_opts) > 0;
855 		if (!ok) {
856 			logit("Unknown port forwarding.");
857 			goto out;
858 		}
859 		logit("Canceled forwarding.");
860 	} else {
861 		if (!parse_forward(&fwd, s, dynamic, remote)) {
862 			logit("Bad forwarding specification.");
863 			goto out;
864 		}
865 		if (local || dynamic) {
866 			if (!channel_setup_local_fwd_listener(ssh, &fwd,
867 			    &options.fwd_opts)) {
868 				logit("Port forwarding failed.");
869 				goto out;
870 			}
871 		} else {
872 			if (channel_request_remote_forwarding(ssh, &fwd) < 0) {
873 				logit("Port forwarding failed.");
874 				goto out;
875 			}
876 		}
877 		logit("Forwarding port.");
878 	}
879 
880 out:
881 	signal(SIGINT, handler);
882 	enter_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
883 	free(cmd);
884 	free(fwd.listen_host);
885 	free(fwd.listen_path);
886 	free(fwd.connect_host);
887 	free(fwd.connect_path);
888 }
889 
890 /* reasons to suppress output of an escape command in help output */
891 #define SUPPRESS_NEVER		0	/* never suppress, always show */
892 #define SUPPRESS_MUXCLIENT	1	/* don't show in mux client sessions */
893 #define SUPPRESS_MUXMASTER	2	/* don't show in mux master sessions */
894 #define SUPPRESS_SYSLOG		4	/* don't show when logging to syslog */
895 struct escape_help_text {
896 	const char *cmd;
897 	const char *text;
898 	unsigned int flags;
899 };
900 static struct escape_help_text esc_txt[] = {
901     {".",  "terminate session", SUPPRESS_MUXMASTER},
902     {".",  "terminate connection (and any multiplexed sessions)",
903 	SUPPRESS_MUXCLIENT},
904     {"B",  "send a BREAK to the remote system", SUPPRESS_NEVER},
905     {"C",  "open a command line", SUPPRESS_MUXCLIENT},
906     {"R",  "request rekey", SUPPRESS_NEVER},
907     {"V/v",  "decrease/increase verbosity (LogLevel)", SUPPRESS_MUXCLIENT},
908     {"^Z", "suspend ssh", SUPPRESS_MUXCLIENT},
909     {"#",  "list forwarded connections", SUPPRESS_NEVER},
910     {"&",  "background ssh (when waiting for connections to terminate)",
911 	SUPPRESS_MUXCLIENT},
912     {"?", "this message", SUPPRESS_NEVER},
913 };
914 
915 static void
916 print_escape_help(struct sshbuf *b, int escape_char, int mux_client,
917     int using_stderr)
918 {
919 	unsigned int i, suppress_flags;
920 	int r;
921 
922 	if ((r = sshbuf_putf(b,
923 	    "%c?\r\nSupported escape sequences:\r\n", escape_char)) != 0)
924 		fatal("%s: buffer error: %s", __func__, ssh_err(r));
925 
926 	suppress_flags =
927 	    (mux_client ? SUPPRESS_MUXCLIENT : 0) |
928 	    (mux_client ? 0 : SUPPRESS_MUXMASTER) |
929 	    (using_stderr ? 0 : SUPPRESS_SYSLOG);
930 
931 	for (i = 0; i < sizeof(esc_txt)/sizeof(esc_txt[0]); i++) {
932 		if (esc_txt[i].flags & suppress_flags)
933 			continue;
934 		if ((r = sshbuf_putf(b, " %c%-3s - %s\r\n",
935 		    escape_char, esc_txt[i].cmd, esc_txt[i].text)) != 0)
936 			fatal("%s: buffer error: %s", __func__, ssh_err(r));
937 	}
938 
939 	if ((r = sshbuf_putf(b,
940 	    " %c%c   - send the escape character by typing it twice\r\n"
941 	    "(Note that escapes are only recognized immediately after "
942 	    "newline.)\r\n", escape_char, escape_char)) != 0)
943 		fatal("%s: buffer error: %s", __func__, ssh_err(r));
944 }
945 
946 /*
947  * Process the characters one by one.
948  */
949 static int
950 process_escapes(struct ssh *ssh, Channel *c,
951     struct sshbuf *bin, struct sshbuf *bout, struct sshbuf *berr,
952     char *buf, int len)
953 {
954 	pid_t pid;
955 	int r, bytes = 0;
956 	u_int i;
957 	u_char ch;
958 	char *s;
959 	struct escape_filter_ctx *efc = c->filter_ctx == NULL ?
960 	    NULL : (struct escape_filter_ctx *)c->filter_ctx;
961 
962 	if (c->filter_ctx == NULL)
963 		return 0;
964 
965 	if (len <= 0)
966 		return (0);
967 
968 	for (i = 0; i < (u_int)len; i++) {
969 		/* Get one character at a time. */
970 		ch = buf[i];
971 
972 		if (efc->escape_pending) {
973 			/* We have previously seen an escape character. */
974 			/* Clear the flag now. */
975 			efc->escape_pending = 0;
976 
977 			/* Process the escaped character. */
978 			switch (ch) {
979 			case '.':
980 				/* Terminate the connection. */
981 				if ((r = sshbuf_putf(berr, "%c.\r\n",
982 				    efc->escape_char)) != 0)
983 					fatal("%s: buffer error: %s",
984 					    __func__, ssh_err(r));
985 				if (c && c->ctl_chan != -1) {
986 					chan_read_failed(ssh, c);
987 					chan_write_failed(ssh, c);
988 					if (c->detach_user) {
989 						c->detach_user(ssh,
990 						    c->self, NULL);
991 					}
992 					c->type = SSH_CHANNEL_ABANDONED;
993 					sshbuf_reset(c->input);
994 					chan_ibuf_empty(ssh, c);
995 					return 0;
996 				} else
997 					quit_pending = 1;
998 				return -1;
999 
1000 			case 'Z' - 64:
1001 				/* XXX support this for mux clients */
1002 				if (c && c->ctl_chan != -1) {
1003 					char b[16];
1004  noescape:
1005 					if (ch == 'Z' - 64)
1006 						snprintf(b, sizeof b, "^Z");
1007 					else
1008 						snprintf(b, sizeof b, "%c", ch);
1009 					if ((r = sshbuf_putf(berr,
1010 					    "%c%s escape not available to "
1011 					    "multiplexed sessions\r\n",
1012 					    efc->escape_char, b)) != 0)
1013 						fatal("%s: buffer error: %s",
1014 						    __func__, ssh_err(r));
1015 					continue;
1016 				}
1017 				/* Suspend the program. Inform the user */
1018 				if ((r = sshbuf_putf(berr,
1019 				    "%c^Z [suspend ssh]\r\n",
1020 				    efc->escape_char)) != 0)
1021 					fatal("%s: buffer error: %s",
1022 					    __func__, ssh_err(r));
1023 
1024 				/* Restore terminal modes and suspend. */
1025 				client_suspend_self(bin, bout, berr);
1026 
1027 				/* We have been continued. */
1028 				continue;
1029 
1030 			case 'B':
1031 				if ((r = sshbuf_putf(berr,
1032 				    "%cB\r\n", efc->escape_char)) != 0)
1033 					fatal("%s: buffer error: %s",
1034 					    __func__, ssh_err(r));
1035 				channel_request_start(ssh, c->self, "break", 0);
1036 				if ((r = sshpkt_put_u32(ssh, 1000)) != 0 ||
1037 				    (r = sshpkt_send(ssh)) != 0)
1038 					fatal("%s: send packet: %s", __func__,
1039 					    ssh_err(r));
1040 				continue;
1041 
1042 			case 'R':
1043 				if (datafellows & SSH_BUG_NOREKEY)
1044 					logit("Server does not "
1045 					    "support re-keying");
1046 				else
1047 					need_rekeying = 1;
1048 				continue;
1049 
1050 			case 'V':
1051 				/* FALLTHROUGH */
1052 			case 'v':
1053 				if (c && c->ctl_chan != -1)
1054 					goto noescape;
1055 				if (!log_is_on_stderr()) {
1056 					if ((r = sshbuf_putf(berr,
1057 					    "%c%c [Logging to syslog]\r\n",
1058 					    efc->escape_char, ch)) != 0)
1059 						fatal("%s: buffer error: %s",
1060 						    __func__, ssh_err(r));
1061 					continue;
1062 				}
1063 				if (ch == 'V' && options.log_level >
1064 				    SYSLOG_LEVEL_QUIET)
1065 					log_change_level(--options.log_level);
1066 				if (ch == 'v' && options.log_level <
1067 				    SYSLOG_LEVEL_DEBUG3)
1068 					log_change_level(++options.log_level);
1069 				if ((r = sshbuf_putf(berr,
1070 				    "%c%c [LogLevel %s]\r\n",
1071 				    efc->escape_char, ch,
1072 				    log_level_name(options.log_level))) != 0)
1073 					fatal("%s: buffer error: %s",
1074 					    __func__, ssh_err(r));
1075 				continue;
1076 
1077 			case '&':
1078 				if (c && c->ctl_chan != -1)
1079 					goto noescape;
1080 				/*
1081 				 * Detach the program (continue to serve
1082 				 * connections, but put in background and no
1083 				 * more new connections).
1084 				 */
1085 				/* Restore tty modes. */
1086 				leave_raw_mode(
1087 				    options.request_tty == REQUEST_TTY_FORCE);
1088 
1089 				/* Stop listening for new connections. */
1090 				channel_stop_listening(ssh);
1091 
1092 				if ((r = sshbuf_putf(berr,
1093 				    "%c& [backgrounded]\n", efc->escape_char))
1094 				     != 0)
1095 					fatal("%s: buffer error: %s",
1096 					    __func__, ssh_err(r));
1097 
1098 				/* Fork into background. */
1099 				pid = fork();
1100 				if (pid < 0) {
1101 					error("fork: %.100s", strerror(errno));
1102 					continue;
1103 				}
1104 				if (pid != 0) {	/* This is the parent. */
1105 					/* The parent just exits. */
1106 					exit(0);
1107 				}
1108 				/* The child continues serving connections. */
1109 				/* fake EOF on stdin */
1110 				if ((r = sshbuf_put_u8(bin, 4)) != 0)
1111 					fatal("%s: buffer error: %s",
1112 					    __func__, ssh_err(r));
1113 				return -1;
1114 			case '?':
1115 				print_escape_help(berr, efc->escape_char,
1116 				    (c && c->ctl_chan != -1),
1117 				    log_is_on_stderr());
1118 				continue;
1119 
1120 			case '#':
1121 				if ((r = sshbuf_putf(berr, "%c#\r\n",
1122 				    efc->escape_char)) != 0)
1123 					fatal("%s: buffer error: %s",
1124 					    __func__, ssh_err(r));
1125 				s = channel_open_message(ssh);
1126 				if ((r = sshbuf_put(berr, s, strlen(s))) != 0)
1127 					fatal("%s: buffer error: %s",
1128 					    __func__, ssh_err(r));
1129 				free(s);
1130 				continue;
1131 
1132 			case 'C':
1133 				if (c && c->ctl_chan != -1)
1134 					goto noescape;
1135 				process_cmdline(ssh);
1136 				continue;
1137 
1138 			default:
1139 				if (ch != efc->escape_char) {
1140 					if ((r = sshbuf_put_u8(bin,
1141 					    efc->escape_char)) != 0)
1142 						fatal("%s: buffer error: %s",
1143 						    __func__, ssh_err(r));
1144 					bytes++;
1145 				}
1146 				/* Escaped characters fall through here */
1147 				break;
1148 			}
1149 		} else {
1150 			/*
1151 			 * The previous character was not an escape char.
1152 			 * Check if this is an escape.
1153 			 */
1154 			if (last_was_cr && ch == efc->escape_char) {
1155 				/*
1156 				 * It is. Set the flag and continue to
1157 				 * next character.
1158 				 */
1159 				efc->escape_pending = 1;
1160 				continue;
1161 			}
1162 		}
1163 
1164 		/*
1165 		 * Normal character.  Record whether it was a newline,
1166 		 * and append it to the buffer.
1167 		 */
1168 		last_was_cr = (ch == '\r' || ch == '\n');
1169 		if ((r = sshbuf_put_u8(bin, ch)) != 0)
1170 			fatal("%s: buffer error: %s", __func__, ssh_err(r));
1171 		bytes++;
1172 	}
1173 	return bytes;
1174 }
1175 
1176 /*
1177  * Get packets from the connection input buffer, and process them as long as
1178  * there are packets available.
1179  *
1180  * Any unknown packets received during the actual
1181  * session cause the session to terminate.  This is
1182  * intended to make debugging easier since no
1183  * confirmations are sent.  Any compatible protocol
1184  * extensions must be negotiated during the
1185  * preparatory phase.
1186  */
1187 
1188 static void
1189 client_process_buffered_input_packets(struct ssh *ssh)
1190 {
1191 	ssh_dispatch_run_fatal(ssh, DISPATCH_NONBLOCK, &quit_pending);
1192 }
1193 
1194 /* scan buf[] for '~' before sending data to the peer */
1195 
1196 /* Helper: allocate a new escape_filter_ctx and fill in its escape char */
1197 void *
1198 client_new_escape_filter_ctx(int escape_char)
1199 {
1200 	struct escape_filter_ctx *ret;
1201 
1202 	ret = xcalloc(1, sizeof(*ret));
1203 	ret->escape_pending = 0;
1204 	ret->escape_char = escape_char;
1205 	return (void *)ret;
1206 }
1207 
1208 /* Free the escape filter context on channel free */
1209 void
1210 client_filter_cleanup(struct ssh *ssh, int cid, void *ctx)
1211 {
1212 	free(ctx);
1213 }
1214 
1215 int
1216 client_simple_escape_filter(struct ssh *ssh, Channel *c, char *buf, int len)
1217 {
1218 	if (c->extended_usage != CHAN_EXTENDED_WRITE)
1219 		return 0;
1220 
1221 	return process_escapes(ssh, c, c->input, c->output, c->extended,
1222 	    buf, len);
1223 }
1224 
1225 static void
1226 client_channel_closed(struct ssh *ssh, int id, void *arg)
1227 {
1228 	channel_cancel_cleanup(ssh, id);
1229 	session_closed = 1;
1230 	leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
1231 }
1232 
1233 /*
1234  * Implements the interactive session with the server.  This is called after
1235  * the user has been authenticated, and a command has been started on the
1236  * remote host.  If escape_char != SSH_ESCAPECHAR_NONE, it is the character
1237  * used as an escape character for terminating or suspending the session.
1238  */
1239 int
1240 client_loop(struct ssh *ssh, int have_pty, int escape_char_arg,
1241     int ssh2_chan_id)
1242 {
1243 	fd_set *readset = NULL, *writeset = NULL;
1244 	double start_time, total_time;
1245 	int r, max_fd = 0, max_fd2 = 0, len;
1246 	u_int64_t ibytes, obytes;
1247 	u_int nalloc = 0;
1248 	char buf[100];
1249 
1250 	debug("Entering interactive session.");
1251 
1252 	if (options.control_master &&
1253 	    !option_clear_or_none(options.control_path)) {
1254 		debug("pledge: id");
1255 		if (pledge("stdio rpath wpath cpath unix inet dns recvfd proc exec id tty",
1256 		    NULL) == -1)
1257 			fatal("%s pledge(): %s", __func__, strerror(errno));
1258 
1259 	} else if (options.forward_x11 || options.permit_local_command) {
1260 		debug("pledge: exec");
1261 		if (pledge("stdio rpath wpath cpath unix inet dns proc exec tty",
1262 		    NULL) == -1)
1263 			fatal("%s pledge(): %s", __func__, strerror(errno));
1264 
1265 	} else if (options.update_hostkeys) {
1266 		debug("pledge: filesystem full");
1267 		if (pledge("stdio rpath wpath cpath unix inet dns proc tty",
1268 		    NULL) == -1)
1269 			fatal("%s pledge(): %s", __func__, strerror(errno));
1270 
1271 	} else if (!option_clear_or_none(options.proxy_command) ||
1272 	    fork_after_authentication_flag) {
1273 		debug("pledge: proc");
1274 		if (pledge("stdio cpath unix inet dns proc tty", NULL) == -1)
1275 			fatal("%s pledge(): %s", __func__, strerror(errno));
1276 
1277 	} else {
1278 		debug("pledge: network");
1279 		if (pledge("stdio unix inet dns proc tty", NULL) == -1)
1280 			fatal("%s pledge(): %s", __func__, strerror(errno));
1281 	}
1282 
1283 	start_time = monotime_double();
1284 
1285 	/* Initialize variables. */
1286 	last_was_cr = 1;
1287 	exit_status = -1;
1288 	connection_in = ssh_packet_get_connection_in(ssh);
1289 	connection_out = ssh_packet_get_connection_out(ssh);
1290 	max_fd = MAXIMUM(connection_in, connection_out);
1291 
1292 	quit_pending = 0;
1293 
1294 	/* Initialize buffer. */
1295 	if ((stderr_buffer = sshbuf_new()) == NULL)
1296 		fatal("%s: sshbuf_new failed", __func__);
1297 
1298 	client_init_dispatch(ssh);
1299 
1300 	/*
1301 	 * Set signal handlers, (e.g. to restore non-blocking mode)
1302 	 * but don't overwrite SIG_IGN, matches behaviour from rsh(1)
1303 	 */
1304 	if (signal(SIGHUP, SIG_IGN) != SIG_IGN)
1305 		signal(SIGHUP, signal_handler);
1306 	if (signal(SIGINT, SIG_IGN) != SIG_IGN)
1307 		signal(SIGINT, signal_handler);
1308 	if (signal(SIGQUIT, SIG_IGN) != SIG_IGN)
1309 		signal(SIGQUIT, signal_handler);
1310 	if (signal(SIGTERM, SIG_IGN) != SIG_IGN)
1311 		signal(SIGTERM, signal_handler);
1312 	signal(SIGWINCH, window_change_handler);
1313 
1314 	if (have_pty)
1315 		enter_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
1316 
1317 	session_ident = ssh2_chan_id;
1318 	if (session_ident != -1) {
1319 		if (escape_char_arg != SSH_ESCAPECHAR_NONE) {
1320 			channel_register_filter(ssh, session_ident,
1321 			    client_simple_escape_filter, NULL,
1322 			    client_filter_cleanup,
1323 			    client_new_escape_filter_ctx(
1324 			    escape_char_arg));
1325 		}
1326 		channel_register_cleanup(ssh, session_ident,
1327 		    client_channel_closed, 0);
1328 	}
1329 
1330 	/* Main loop of the client for the interactive session mode. */
1331 	while (!quit_pending) {
1332 
1333 		/* Process buffered packets sent by the server. */
1334 		client_process_buffered_input_packets(ssh);
1335 
1336 		if (session_closed && !channel_still_open(ssh))
1337 			break;
1338 
1339 		if (ssh_packet_is_rekeying(ssh)) {
1340 			debug("rekeying in progress");
1341 		} else if (need_rekeying) {
1342 			/* manual rekey request */
1343 			debug("need rekeying");
1344 			if ((r = kex_start_rekex(ssh)) != 0)
1345 				fatal("%s: kex_start_rekex: %s", __func__,
1346 				    ssh_err(r));
1347 			need_rekeying = 0;
1348 		} else {
1349 			/*
1350 			 * Make packets from buffered channel data, and
1351 			 * enqueue them for sending to the server.
1352 			 */
1353 			if (ssh_packet_not_very_much_data_to_write(ssh))
1354 				channel_output_poll(ssh);
1355 
1356 			/*
1357 			 * Check if the window size has changed, and buffer a
1358 			 * message about it to the server if so.
1359 			 */
1360 			client_check_window_change(ssh);
1361 
1362 			if (quit_pending)
1363 				break;
1364 		}
1365 		/*
1366 		 * Wait until we have something to do (something becomes
1367 		 * available on one of the descriptors).
1368 		 */
1369 		max_fd2 = max_fd;
1370 		client_wait_until_can_do_something(ssh, &readset, &writeset,
1371 		    &max_fd2, &nalloc, ssh_packet_is_rekeying(ssh));
1372 
1373 		if (quit_pending)
1374 			break;
1375 
1376 		/* Do channel operations unless rekeying in progress. */
1377 		if (!ssh_packet_is_rekeying(ssh))
1378 			channel_after_select(ssh, readset, writeset);
1379 
1380 		/* Buffer input from the connection.  */
1381 		client_process_net_input(ssh, readset);
1382 
1383 		if (quit_pending)
1384 			break;
1385 
1386 		/*
1387 		 * Send as much buffered packet data as possible to the
1388 		 * sender.
1389 		 */
1390 		if (FD_ISSET(connection_out, writeset))
1391 			ssh_packet_write_poll(ssh);
1392 
1393 		/*
1394 		 * If we are a backgrounded control master, and the
1395 		 * timeout has expired without any active client
1396 		 * connections, then quit.
1397 		 */
1398 		if (control_persist_exit_time > 0) {
1399 			if (monotime() >= control_persist_exit_time) {
1400 				debug("ControlPersist timeout expired");
1401 				break;
1402 			}
1403 		}
1404 	}
1405 	free(readset);
1406 	free(writeset);
1407 
1408 	/* Terminate the session. */
1409 
1410 	/* Stop watching for window change. */
1411 	signal(SIGWINCH, SIG_DFL);
1412 
1413 	if ((r = sshpkt_start(ssh, SSH2_MSG_DISCONNECT)) != 0 ||
1414 	    (r = sshpkt_put_u32(ssh, SSH2_DISCONNECT_BY_APPLICATION)) != 0 ||
1415 	    (r = sshpkt_put_cstring(ssh, "disconnected by user")) != 0 ||
1416 	    (r = sshpkt_put_cstring(ssh, "")) != 0 ||	/* language tag */
1417 	    (r = sshpkt_send(ssh)) != 0 ||
1418 	    (r = ssh_packet_write_wait(ssh)) != 0)
1419 		fatal("%s: send disconnect: %s", __func__, ssh_err(r));
1420 
1421 	channel_free_all(ssh);
1422 
1423 	if (have_pty)
1424 		leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
1425 
1426 	/* restore blocking io */
1427 	if (!isatty(fileno(stdin)))
1428 		unset_nonblock(fileno(stdin));
1429 	if (!isatty(fileno(stdout)))
1430 		unset_nonblock(fileno(stdout));
1431 	if (!isatty(fileno(stderr)))
1432 		unset_nonblock(fileno(stderr));
1433 
1434 	/*
1435 	 * If there was no shell or command requested, there will be no remote
1436 	 * exit status to be returned.  In that case, clear error code if the
1437 	 * connection was deliberately terminated at this end.
1438 	 */
1439 	if (no_shell_flag && received_signal == SIGTERM) {
1440 		received_signal = 0;
1441 		exit_status = 0;
1442 	}
1443 
1444 	if (received_signal) {
1445 		verbose("Killed by signal %d.", (int) received_signal);
1446 		cleanup_exit(0);
1447 	}
1448 
1449 	/*
1450 	 * In interactive mode (with pseudo tty) display a message indicating
1451 	 * that the connection has been closed.
1452 	 */
1453 	if (have_pty && options.log_level != SYSLOG_LEVEL_QUIET) {
1454 		if ((r = sshbuf_putf(stderr_buffer,
1455 		    "Connection to %.64s closed.\r\n", host)) != 0)
1456 			fatal("%s: buffer error: %s", __func__, ssh_err(r));
1457 	}
1458 
1459 	/* Output any buffered data for stderr. */
1460 	if (sshbuf_len(stderr_buffer) > 0) {
1461 		len = atomicio(vwrite, fileno(stderr),
1462 		    (u_char *)sshbuf_ptr(stderr_buffer),
1463 		    sshbuf_len(stderr_buffer));
1464 		if (len < 0 || (u_int)len != sshbuf_len(stderr_buffer))
1465 			error("Write failed flushing stderr buffer.");
1466 		else if ((r = sshbuf_consume(stderr_buffer, len)) != 0)
1467 			fatal("%s: buffer error: %s", __func__, ssh_err(r));
1468 	}
1469 
1470 	/* Clear and free any buffers. */
1471 	explicit_bzero(buf, sizeof(buf));
1472 	sshbuf_free(stderr_buffer);
1473 
1474 	/* Report bytes transferred, and transfer rates. */
1475 	total_time = monotime_double() - start_time;
1476 	ssh_packet_get_bytes(ssh, &ibytes, &obytes);
1477 	verbose("Transferred: sent %llu, received %llu bytes, in %.1f seconds",
1478 	    (unsigned long long)obytes, (unsigned long long)ibytes, total_time);
1479 	if (total_time > 0)
1480 		verbose("Bytes per second: sent %.1f, received %.1f",
1481 		    obytes / total_time, ibytes / total_time);
1482 	/* Return the exit status of the program. */
1483 	debug("Exit status %d", exit_status);
1484 	return exit_status;
1485 }
1486 
1487 /*********/
1488 
1489 static Channel *
1490 client_request_forwarded_tcpip(struct ssh *ssh, const char *request_type,
1491     int rchan, u_int rwindow, u_int rmaxpack)
1492 {
1493 	Channel *c = NULL;
1494 	struct sshbuf *b = NULL;
1495 	char *listen_address, *originator_address;
1496 	u_int listen_port, originator_port;
1497 	int r;
1498 
1499 	/* Get rest of the packet */
1500 	if ((r = sshpkt_get_cstring(ssh, &listen_address, NULL)) != 0 ||
1501 	    (r = sshpkt_get_u32(ssh, &listen_port)) != 0 ||
1502 	    (r = sshpkt_get_cstring(ssh, &originator_address, NULL)) != 0 ||
1503 	    (r = sshpkt_get_u32(ssh, &originator_port)) != 0 ||
1504 	    (r = sshpkt_get_end(ssh)) != 0)
1505 		fatal("%s: parse packet: %s", __func__, ssh_err(r));
1506 
1507 	debug("%s: listen %s port %d, originator %s port %d", __func__,
1508 	    listen_address, listen_port, originator_address, originator_port);
1509 
1510 	if (listen_port > 0xffff)
1511 		error("%s: invalid listen port", __func__);
1512 	else if (originator_port > 0xffff)
1513 		error("%s: invalid originator port", __func__);
1514 	else {
1515 		c = channel_connect_by_listen_address(ssh,
1516 		    listen_address, listen_port, "forwarded-tcpip",
1517 		    originator_address);
1518 	}
1519 
1520 	if (c != NULL && c->type == SSH_CHANNEL_MUX_CLIENT) {
1521 		if ((b = sshbuf_new()) == NULL) {
1522 			error("%s: alloc reply", __func__);
1523 			goto out;
1524 		}
1525 		/* reconstruct and send to muxclient */
1526 		if ((r = sshbuf_put_u8(b, 0)) != 0 ||	/* padlen */
1527 		    (r = sshbuf_put_u8(b, SSH2_MSG_CHANNEL_OPEN)) != 0 ||
1528 		    (r = sshbuf_put_cstring(b, request_type)) != 0 ||
1529 		    (r = sshbuf_put_u32(b, rchan)) != 0 ||
1530 		    (r = sshbuf_put_u32(b, rwindow)) != 0 ||
1531 		    (r = sshbuf_put_u32(b, rmaxpack)) != 0 ||
1532 		    (r = sshbuf_put_cstring(b, listen_address)) != 0 ||
1533 		    (r = sshbuf_put_u32(b, listen_port)) != 0 ||
1534 		    (r = sshbuf_put_cstring(b, originator_address)) != 0 ||
1535 		    (r = sshbuf_put_u32(b, originator_port)) != 0 ||
1536 		    (r = sshbuf_put_stringb(c->output, b)) != 0) {
1537 			error("%s: compose for muxclient %s", __func__,
1538 			    ssh_err(r));
1539 			goto out;
1540 		}
1541 	}
1542 
1543  out:
1544 	sshbuf_free(b);
1545 	free(originator_address);
1546 	free(listen_address);
1547 	return c;
1548 }
1549 
1550 static Channel *
1551 client_request_forwarded_streamlocal(struct ssh *ssh,
1552     const char *request_type, int rchan)
1553 {
1554 	Channel *c = NULL;
1555 	char *listen_path;
1556 	int r;
1557 
1558 	/* Get the remote path. */
1559 	if ((r = sshpkt_get_cstring(ssh, &listen_path, NULL)) != 0 ||
1560 	    (r = sshpkt_get_string(ssh, NULL, NULL)) != 0 ||	/* reserved */
1561 	    (r = sshpkt_get_end(ssh)) != 0)
1562 		fatal("%s: parse packet: %s", __func__, ssh_err(r));
1563 
1564 	debug("%s: request: %s", __func__, listen_path);
1565 
1566 	c = channel_connect_by_listen_path(ssh, listen_path,
1567 	    "forwarded-streamlocal@openssh.com", "forwarded-streamlocal");
1568 	free(listen_path);
1569 	return c;
1570 }
1571 
1572 static Channel *
1573 client_request_x11(struct ssh *ssh, const char *request_type, int rchan)
1574 {
1575 	Channel *c = NULL;
1576 	char *originator;
1577 	u_int originator_port;
1578 	int r, sock;
1579 
1580 	if (!options.forward_x11) {
1581 		error("Warning: ssh server tried X11 forwarding.");
1582 		error("Warning: this is probably a break-in attempt by a "
1583 		    "malicious server.");
1584 		return NULL;
1585 	}
1586 	if (x11_refuse_time != 0 && (u_int)monotime() >= x11_refuse_time) {
1587 		verbose("Rejected X11 connection after ForwardX11Timeout "
1588 		    "expired");
1589 		return NULL;
1590 	}
1591 	if ((r = sshpkt_get_cstring(ssh, &originator, NULL)) != 0 ||
1592 	    (r = sshpkt_get_u32(ssh, &originator_port)) != 0 ||
1593 	    (r = sshpkt_get_end(ssh)) != 0)
1594 		fatal("%s: parse packet: %s", __func__, ssh_err(r));
1595 	/* XXX check permission */
1596 	/* XXX range check originator port? */
1597 	debug("client_request_x11: request from %s %u", originator,
1598 	    originator_port);
1599 	free(originator);
1600 	sock = x11_connect_display(ssh);
1601 	if (sock < 0)
1602 		return NULL;
1603 	c = channel_new(ssh, "x11",
1604 	    SSH_CHANNEL_X11_OPEN, sock, sock, -1,
1605 	    CHAN_TCP_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
1606 	c->force_drain = 1;
1607 	return c;
1608 }
1609 
1610 static Channel *
1611 client_request_agent(struct ssh *ssh, const char *request_type, int rchan)
1612 {
1613 	Channel *c = NULL;
1614 	int r, sock;
1615 
1616 	if (!options.forward_agent) {
1617 		error("Warning: ssh server tried agent forwarding.");
1618 		error("Warning: this is probably a break-in attempt by a "
1619 		    "malicious server.");
1620 		return NULL;
1621 	}
1622 	if ((r = ssh_get_authentication_socket(&sock)) != 0) {
1623 		if (r != SSH_ERR_AGENT_NOT_PRESENT)
1624 			debug("%s: ssh_get_authentication_socket: %s",
1625 			    __func__, ssh_err(r));
1626 		return NULL;
1627 	}
1628 	c = channel_new(ssh, "authentication agent connection",
1629 	    SSH_CHANNEL_OPEN, sock, sock, -1,
1630 	    CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0,
1631 	    "authentication agent connection", 1);
1632 	c->force_drain = 1;
1633 	return c;
1634 }
1635 
1636 char *
1637 client_request_tun_fwd(struct ssh *ssh, int tun_mode,
1638     int local_tun, int remote_tun)
1639 {
1640 	Channel *c;
1641 	int r, fd;
1642 	char *ifname = NULL;
1643 
1644 	if (tun_mode == SSH_TUNMODE_NO)
1645 		return 0;
1646 
1647 	debug("Requesting tun unit %d in mode %d", local_tun, tun_mode);
1648 
1649 	/* Open local tunnel device */
1650 	if ((fd = tun_open(local_tun, tun_mode, &ifname)) == -1) {
1651 		error("Tunnel device open failed.");
1652 		return NULL;
1653 	}
1654 	debug("Tunnel forwarding using interface %s", ifname);
1655 
1656 	c = channel_new(ssh, "tun", SSH_CHANNEL_OPENING, fd, fd, -1,
1657 	    CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
1658 	c->datagram = 1;
1659 
1660 #if defined(SSH_TUN_FILTER)
1661 	if (options.tun_open == SSH_TUNMODE_POINTOPOINT)
1662 		channel_register_filter(ssh, c->self, sys_tun_infilter,
1663 		    sys_tun_outfilter, NULL, NULL);
1664 #endif
1665 
1666 	if ((r = sshpkt_start(ssh, SSH2_MSG_CHANNEL_OPEN)) != 0 ||
1667 	    (r = sshpkt_put_cstring(ssh, "tun@openssh.com")) != 0 ||
1668 	    (r = sshpkt_put_u32(ssh, c->self)) != 0 ||
1669 	    (r = sshpkt_put_u32(ssh, c->local_window_max)) != 0 ||
1670 	    (r = sshpkt_put_u32(ssh, c->local_maxpacket)) != 0 ||
1671 	    (r = sshpkt_put_u32(ssh, tun_mode)) != 0 ||
1672 	    (r = sshpkt_put_u32(ssh, remote_tun)) != 0 ||
1673 	    (r = sshpkt_send(ssh)) != 0)
1674 		sshpkt_fatal(ssh, r, "%s: send reply", __func__);
1675 
1676 	return ifname;
1677 }
1678 
1679 /* XXXX move to generic input handler */
1680 static int
1681 client_input_channel_open(int type, u_int32_t seq, struct ssh *ssh)
1682 {
1683 	Channel *c = NULL;
1684 	char *ctype = NULL;
1685 	int r;
1686 	u_int rchan;
1687 	size_t len;
1688 	u_int rmaxpack, rwindow;
1689 
1690 	if ((r = sshpkt_get_cstring(ssh, &ctype, &len)) != 0 ||
1691 	    (r = sshpkt_get_u32(ssh, &rchan)) != 0 ||
1692 	    (r = sshpkt_get_u32(ssh, &rwindow)) != 0 ||
1693 	    (r = sshpkt_get_u32(ssh, &rmaxpack)) != 0)
1694 		goto out;
1695 
1696 	debug("client_input_channel_open: ctype %s rchan %d win %d max %d",
1697 	    ctype, rchan, rwindow, rmaxpack);
1698 
1699 	if (strcmp(ctype, "forwarded-tcpip") == 0) {
1700 		c = client_request_forwarded_tcpip(ssh, ctype, rchan, rwindow,
1701 		    rmaxpack);
1702 	} else if (strcmp(ctype, "forwarded-streamlocal@openssh.com") == 0) {
1703 		c = client_request_forwarded_streamlocal(ssh, ctype, rchan);
1704 	} else if (strcmp(ctype, "x11") == 0) {
1705 		c = client_request_x11(ssh, ctype, rchan);
1706 	} else if (strcmp(ctype, "auth-agent@openssh.com") == 0) {
1707 		c = client_request_agent(ssh, ctype, rchan);
1708 	}
1709 	if (c != NULL && c->type == SSH_CHANNEL_MUX_CLIENT) {
1710 		debug3("proxied to downstream: %s", ctype);
1711 	} else if (c != NULL) {
1712 		debug("confirm %s", ctype);
1713 		c->remote_id = rchan;
1714 		c->have_remote_id = 1;
1715 		c->remote_window = rwindow;
1716 		c->remote_maxpacket = rmaxpack;
1717 		if (c->type != SSH_CHANNEL_CONNECTING) {
1718 			if ((r = sshpkt_start(ssh, SSH2_MSG_CHANNEL_OPEN_CONFIRMATION)) != 0 ||
1719 			    (r = sshpkt_put_u32(ssh, c->remote_id)) != 0 ||
1720 			    (r = sshpkt_put_u32(ssh, c->self)) != 0 ||
1721 			    (r = sshpkt_put_u32(ssh, c->local_window)) != 0 ||
1722 			    (r = sshpkt_put_u32(ssh, c->local_maxpacket)) != 0 ||
1723 			    (r = sshpkt_send(ssh)) != 0)
1724 				sshpkt_fatal(ssh, r, "%s: send reply", __func__);
1725 		}
1726 	} else {
1727 		debug("failure %s", ctype);
1728 		if ((r = sshpkt_start(ssh, SSH2_MSG_CHANNEL_OPEN_FAILURE)) != 0 ||
1729 		    (r = sshpkt_put_u32(ssh, rchan)) != 0 ||
1730 		    (r = sshpkt_put_u32(ssh, SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED)) != 0 ||
1731 		    (r = sshpkt_put_cstring(ssh, "open failed")) != 0 ||
1732 		    (r = sshpkt_put_cstring(ssh, "")) != 0 ||
1733 		    (r = sshpkt_send(ssh)) != 0)
1734 			sshpkt_fatal(ssh, r, "%s: send failure", __func__);
1735 	}
1736 	r = 0;
1737  out:
1738 	free(ctype);
1739 	return r;
1740 }
1741 
1742 static int
1743 client_input_channel_req(int type, u_int32_t seq, struct ssh *ssh)
1744 {
1745 	Channel *c = NULL;
1746 	char *rtype = NULL;
1747 	u_char reply;
1748 	u_int id, exitval;
1749 	int r, success = 0;
1750 
1751 	if ((r = sshpkt_get_u32(ssh, &id)) != 0)
1752 		return r;
1753 	if (id <= INT_MAX)
1754 		c = channel_lookup(ssh, id);
1755 	if (channel_proxy_upstream(c, type, seq, ssh))
1756 		return 0;
1757 	if ((r = sshpkt_get_cstring(ssh, &rtype, NULL)) != 0 ||
1758 	    (r = sshpkt_get_u8(ssh, &reply)) != 0)
1759 		goto out;
1760 
1761 	debug("client_input_channel_req: channel %u rtype %s reply %d",
1762 	    id, rtype, reply);
1763 
1764 	if (c == NULL) {
1765 		error("client_input_channel_req: channel %d: "
1766 		    "unknown channel", id);
1767 	} else if (strcmp(rtype, "eow@openssh.com") == 0) {
1768 		if ((r = sshpkt_get_end(ssh)) != 0)
1769 			goto out;
1770 		chan_rcvd_eow(ssh, c);
1771 	} else if (strcmp(rtype, "exit-status") == 0) {
1772 		if ((r = sshpkt_get_u32(ssh, &exitval)) != 0)
1773 			goto out;
1774 		if (c->ctl_chan != -1) {
1775 			mux_exit_message(ssh, c, exitval);
1776 			success = 1;
1777 		} else if ((int)id == session_ident) {
1778 			/* Record exit value of local session */
1779 			success = 1;
1780 			exit_status = exitval;
1781 		} else {
1782 			/* Probably for a mux channel that has already closed */
1783 			debug("%s: no sink for exit-status on channel %d",
1784 			    __func__, id);
1785 		}
1786 		if ((r = sshpkt_get_end(ssh)) != 0)
1787 			goto out;
1788 	}
1789 	if (reply && c != NULL && !(c->flags & CHAN_CLOSE_SENT)) {
1790 		if (!c->have_remote_id)
1791 			fatal("%s: channel %d: no remote_id",
1792 			    __func__, c->self);
1793 		if ((r = sshpkt_start(ssh, success ?
1794 		    SSH2_MSG_CHANNEL_SUCCESS : SSH2_MSG_CHANNEL_FAILURE)) != 0 ||
1795 		    (r = sshpkt_put_u32(ssh, c->remote_id)) != 0 ||
1796 		    (r = sshpkt_send(ssh)) != 0)
1797 			sshpkt_fatal(ssh, r, "%s: send failure", __func__);
1798 	}
1799 	r = 0;
1800  out:
1801 	free(rtype);
1802 	return r;
1803 }
1804 
1805 struct hostkeys_update_ctx {
1806 	/* The hostname and (optionally) IP address string for the server */
1807 	char *host_str, *ip_str;
1808 
1809 	/*
1810 	 * Keys received from the server and a flag for each indicating
1811 	 * whether they already exist in known_hosts.
1812 	 * keys_seen is filled in by hostkeys_find() and later (for new
1813 	 * keys) by client_global_hostkeys_private_confirm().
1814 	 */
1815 	struct sshkey **keys;
1816 	int *keys_seen;
1817 	size_t nkeys, nnew;
1818 
1819 	/*
1820 	 * Keys that are in known_hosts, but were not present in the update
1821 	 * from the server (i.e. scheduled to be deleted).
1822 	 * Filled in by hostkeys_find().
1823 	 */
1824 	struct sshkey **old_keys;
1825 	size_t nold;
1826 };
1827 
1828 static void
1829 hostkeys_update_ctx_free(struct hostkeys_update_ctx *ctx)
1830 {
1831 	size_t i;
1832 
1833 	if (ctx == NULL)
1834 		return;
1835 	for (i = 0; i < ctx->nkeys; i++)
1836 		sshkey_free(ctx->keys[i]);
1837 	free(ctx->keys);
1838 	free(ctx->keys_seen);
1839 	for (i = 0; i < ctx->nold; i++)
1840 		sshkey_free(ctx->old_keys[i]);
1841 	free(ctx->old_keys);
1842 	free(ctx->host_str);
1843 	free(ctx->ip_str);
1844 	free(ctx);
1845 }
1846 
1847 static int
1848 hostkeys_find(struct hostkey_foreach_line *l, void *_ctx)
1849 {
1850 	struct hostkeys_update_ctx *ctx = (struct hostkeys_update_ctx *)_ctx;
1851 	size_t i;
1852 	struct sshkey **tmp;
1853 
1854 	if (l->status != HKF_STATUS_MATCHED || l->key == NULL)
1855 		return 0;
1856 
1857 	/* Mark off keys we've already seen for this host */
1858 	for (i = 0; i < ctx->nkeys; i++) {
1859 		if (sshkey_equal(l->key, ctx->keys[i])) {
1860 			debug3("%s: found %s key at %s:%ld", __func__,
1861 			    sshkey_ssh_name(ctx->keys[i]), l->path, l->linenum);
1862 			ctx->keys_seen[i] = 1;
1863 			return 0;
1864 		}
1865 	}
1866 	/* This line contained a key that not offered by the server */
1867 	debug3("%s: deprecated %s key at %s:%ld", __func__,
1868 	    sshkey_ssh_name(l->key), l->path, l->linenum);
1869 	if ((tmp = recallocarray(ctx->old_keys, ctx->nold, ctx->nold + 1,
1870 	    sizeof(*ctx->old_keys))) == NULL)
1871 		fatal("%s: recallocarray failed nold = %zu",
1872 		    __func__, ctx->nold);
1873 	ctx->old_keys = tmp;
1874 	ctx->old_keys[ctx->nold++] = l->key;
1875 	l->key = NULL;
1876 
1877 	return 0;
1878 }
1879 
1880 static void
1881 update_known_hosts(struct hostkeys_update_ctx *ctx)
1882 {
1883 	int r, was_raw = 0;
1884 	int loglevel = options.update_hostkeys == SSH_UPDATE_HOSTKEYS_ASK ?
1885 	    SYSLOG_LEVEL_INFO : SYSLOG_LEVEL_VERBOSE;
1886 	char *fp, *response;
1887 	size_t i;
1888 
1889 	for (i = 0; i < ctx->nkeys; i++) {
1890 		if (ctx->keys_seen[i] != 2)
1891 			continue;
1892 		if ((fp = sshkey_fingerprint(ctx->keys[i],
1893 		    options.fingerprint_hash, SSH_FP_DEFAULT)) == NULL)
1894 			fatal("%s: sshkey_fingerprint failed", __func__);
1895 		do_log2(loglevel, "Learned new hostkey: %s %s",
1896 		    sshkey_type(ctx->keys[i]), fp);
1897 		free(fp);
1898 	}
1899 	for (i = 0; i < ctx->nold; i++) {
1900 		if ((fp = sshkey_fingerprint(ctx->old_keys[i],
1901 		    options.fingerprint_hash, SSH_FP_DEFAULT)) == NULL)
1902 			fatal("%s: sshkey_fingerprint failed", __func__);
1903 		do_log2(loglevel, "Deprecating obsolete hostkey: %s %s",
1904 		    sshkey_type(ctx->old_keys[i]), fp);
1905 		free(fp);
1906 	}
1907 	if (options.update_hostkeys == SSH_UPDATE_HOSTKEYS_ASK) {
1908 		if (get_saved_tio() != NULL) {
1909 			leave_raw_mode(1);
1910 			was_raw = 1;
1911 		}
1912 		response = NULL;
1913 		for (i = 0; !quit_pending && i < 3; i++) {
1914 			free(response);
1915 			response = read_passphrase("Accept updated hostkeys? "
1916 			    "(yes/no): ", RP_ECHO);
1917 			if (strcasecmp(response, "yes") == 0)
1918 				break;
1919 			else if (quit_pending || response == NULL ||
1920 			    strcasecmp(response, "no") == 0) {
1921 				options.update_hostkeys = 0;
1922 				break;
1923 			} else {
1924 				do_log2(loglevel, "Please enter "
1925 				    "\"yes\" or \"no\"");
1926 			}
1927 		}
1928 		if (quit_pending || i >= 3 || response == NULL)
1929 			options.update_hostkeys = 0;
1930 		free(response);
1931 		if (was_raw)
1932 			enter_raw_mode(1);
1933 	}
1934 
1935 	/*
1936 	 * Now that all the keys are verified, we can go ahead and replace
1937 	 * them in known_hosts (assuming SSH_UPDATE_HOSTKEYS_ASK didn't
1938 	 * cancel the operation).
1939 	 */
1940 	if (options.update_hostkeys != 0 &&
1941 	    (r = hostfile_replace_entries(options.user_hostfiles[0],
1942 	    ctx->host_str, ctx->ip_str, ctx->keys, ctx->nkeys,
1943 	    options.hash_known_hosts, 0,
1944 	    options.fingerprint_hash)) != 0)
1945 		error("%s: hostfile_replace_entries failed: %s",
1946 		    __func__, ssh_err(r));
1947 }
1948 
1949 static void
1950 client_global_hostkeys_private_confirm(struct ssh *ssh, int type,
1951     u_int32_t seq, void *_ctx)
1952 {
1953 	struct hostkeys_update_ctx *ctx = (struct hostkeys_update_ctx *)_ctx;
1954 	size_t i, ndone;
1955 	struct sshbuf *signdata;
1956 	int r, kexsigtype, use_kexsigtype;
1957 	const u_char *sig;
1958 	size_t siglen;
1959 
1960 	if (ctx->nnew == 0)
1961 		fatal("%s: ctx->nnew == 0", __func__); /* sanity */
1962 	if (type != SSH2_MSG_REQUEST_SUCCESS) {
1963 		error("Server failed to confirm ownership of "
1964 		    "private host keys");
1965 		hostkeys_update_ctx_free(ctx);
1966 		return;
1967 	}
1968 	kexsigtype = sshkey_type_plain(
1969 	    sshkey_type_from_name(ssh->kex->hostkey_alg));
1970 
1971 	if ((signdata = sshbuf_new()) == NULL)
1972 		fatal("%s: sshbuf_new failed", __func__);
1973 	/* Don't want to accidentally accept an unbound signature */
1974 	if (ssh->kex->session_id_len == 0)
1975 		fatal("%s: ssh->kex->session_id_len == 0", __func__);
1976 	/*
1977 	 * Expect a signature for each of the ctx->nnew private keys we
1978 	 * haven't seen before. They will be in the same order as the
1979 	 * ctx->keys where the corresponding ctx->keys_seen[i] == 0.
1980 	 */
1981 	for (ndone = i = 0; i < ctx->nkeys; i++) {
1982 		if (ctx->keys_seen[i])
1983 			continue;
1984 		/* Prepare data to be signed: session ID, unique string, key */
1985 		sshbuf_reset(signdata);
1986 		if ( (r = sshbuf_put_cstring(signdata,
1987 		    "hostkeys-prove-00@openssh.com")) != 0 ||
1988 		    (r = sshbuf_put_string(signdata, ssh->kex->session_id,
1989 		    ssh->kex->session_id_len)) != 0 ||
1990 		    (r = sshkey_puts(ctx->keys[i], signdata)) != 0)
1991 			fatal("%s: failed to prepare signature: %s",
1992 			    __func__, ssh_err(r));
1993 		/* Extract and verify signature */
1994 		if ((r = sshpkt_get_string_direct(ssh, &sig, &siglen)) != 0) {
1995 			error("%s: couldn't parse message: %s",
1996 			    __func__, ssh_err(r));
1997 			goto out;
1998 		}
1999 		/*
2000 		 * For RSA keys, prefer to use the signature type negotiated
2001 		 * during KEX to the default (SHA1).
2002 		 */
2003 		use_kexsigtype = kexsigtype == KEY_RSA &&
2004 		    sshkey_type_plain(ctx->keys[i]->type) == KEY_RSA;
2005 		if ((r = sshkey_verify(ctx->keys[i], sig, siglen,
2006 		    sshbuf_ptr(signdata), sshbuf_len(signdata),
2007 		    use_kexsigtype ? ssh->kex->hostkey_alg : NULL, 0)) != 0) {
2008 			error("%s: server gave bad signature for %s key %zu",
2009 			    __func__, sshkey_type(ctx->keys[i]), i);
2010 			goto out;
2011 		}
2012 		/* Key is good. Mark it as 'seen' */
2013 		ctx->keys_seen[i] = 2;
2014 		ndone++;
2015 	}
2016 	if (ndone != ctx->nnew)
2017 		fatal("%s: ndone != ctx->nnew (%zu / %zu)", __func__,
2018 		    ndone, ctx->nnew);  /* Shouldn't happen */
2019 	if ((r = sshpkt_get_end(ssh)) != 0) {
2020 		error("%s: protocol error", __func__);
2021 		goto out;
2022 	}
2023 
2024 	/* Make the edits to known_hosts */
2025 	update_known_hosts(ctx);
2026  out:
2027 	hostkeys_update_ctx_free(ctx);
2028 }
2029 
2030 /*
2031  * Returns non-zero if the key is accepted by HostkeyAlgorithms.
2032  * Made slightly less trivial by the multiple RSA signature algorithm names.
2033  */
2034 static int
2035 key_accepted_by_hostkeyalgs(const struct sshkey *key)
2036 {
2037 	const char *ktype = sshkey_ssh_name(key);
2038 	const char *hostkeyalgs = options.hostkeyalgorithms != NULL ?
2039 	    options.hostkeyalgorithms : KEX_DEFAULT_PK_ALG;
2040 
2041 	if (key == NULL || key->type == KEY_UNSPEC)
2042 		return 0;
2043 	if (key->type == KEY_RSA &&
2044 	    (match_pattern_list("rsa-sha2-256", hostkeyalgs, 0) == 1 ||
2045 	    match_pattern_list("rsa-sha2-512", hostkeyalgs, 0) == 1))
2046 		return 1;
2047 	return match_pattern_list(ktype, hostkeyalgs, 0) == 1;
2048 }
2049 
2050 /*
2051  * Handle hostkeys-00@openssh.com global request to inform the client of all
2052  * the server's hostkeys. The keys are checked against the user's
2053  * HostkeyAlgorithms preference before they are accepted.
2054  */
2055 static int
2056 client_input_hostkeys(struct ssh *ssh)
2057 {
2058 	const u_char *blob = NULL;
2059 	size_t i, len = 0;
2060 	struct sshbuf *buf = NULL;
2061 	struct sshkey *key = NULL, **tmp;
2062 	int r;
2063 	char *fp;
2064 	static int hostkeys_seen = 0; /* XXX use struct ssh */
2065 	extern struct sockaddr_storage hostaddr; /* XXX from ssh.c */
2066 	struct hostkeys_update_ctx *ctx = NULL;
2067 
2068 	if (hostkeys_seen)
2069 		fatal("%s: server already sent hostkeys", __func__);
2070 	if (options.update_hostkeys == SSH_UPDATE_HOSTKEYS_ASK &&
2071 	    options.batch_mode)
2072 		return 1; /* won't ask in batchmode, so don't even try */
2073 	if (!options.update_hostkeys || options.num_user_hostfiles <= 0)
2074 		return 1;
2075 
2076 	ctx = xcalloc(1, sizeof(*ctx));
2077 	while (ssh_packet_remaining(ssh) > 0) {
2078 		sshkey_free(key);
2079 		key = NULL;
2080 		if ((r = sshpkt_get_string_direct(ssh, &blob, &len)) != 0) {
2081 			error("%s: couldn't parse message: %s",
2082 			    __func__, ssh_err(r));
2083 			goto out;
2084 		}
2085 		if ((r = sshkey_from_blob(blob, len, &key)) != 0) {
2086 			error("%s: parse key: %s", __func__, ssh_err(r));
2087 			goto out;
2088 		}
2089 		fp = sshkey_fingerprint(key, options.fingerprint_hash,
2090 		    SSH_FP_DEFAULT);
2091 		debug3("%s: received %s key %s", __func__,
2092 		    sshkey_type(key), fp);
2093 		free(fp);
2094 
2095 		if (!key_accepted_by_hostkeyalgs(key)) {
2096 			debug3("%s: %s key not permitted by HostkeyAlgorithms",
2097 			    __func__, sshkey_ssh_name(key));
2098 			continue;
2099 		}
2100 		/* Skip certs */
2101 		if (sshkey_is_cert(key)) {
2102 			debug3("%s: %s key is a certificate; skipping",
2103 			    __func__, sshkey_ssh_name(key));
2104 			continue;
2105 		}
2106 		/* Ensure keys are unique */
2107 		for (i = 0; i < ctx->nkeys; i++) {
2108 			if (sshkey_equal(key, ctx->keys[i])) {
2109 				error("%s: received duplicated %s host key",
2110 				    __func__, sshkey_ssh_name(key));
2111 				goto out;
2112 			}
2113 		}
2114 		/* Key is good, record it */
2115 		if ((tmp = recallocarray(ctx->keys, ctx->nkeys, ctx->nkeys + 1,
2116 		    sizeof(*ctx->keys))) == NULL)
2117 			fatal("%s: recallocarray failed nkeys = %zu",
2118 			    __func__, ctx->nkeys);
2119 		ctx->keys = tmp;
2120 		ctx->keys[ctx->nkeys++] = key;
2121 		key = NULL;
2122 	}
2123 
2124 	if (ctx->nkeys == 0) {
2125 		debug("%s: server sent no hostkeys", __func__);
2126 		goto out;
2127 	}
2128 
2129 	if ((ctx->keys_seen = calloc(ctx->nkeys,
2130 	    sizeof(*ctx->keys_seen))) == NULL)
2131 		fatal("%s: calloc failed", __func__);
2132 
2133 	get_hostfile_hostname_ipaddr(host,
2134 	    options.check_host_ip ? (struct sockaddr *)&hostaddr : NULL,
2135 	    options.port, &ctx->host_str,
2136 	    options.check_host_ip ? &ctx->ip_str : NULL);
2137 
2138 	/* Find which keys we already know about. */
2139 	if ((r = hostkeys_foreach(options.user_hostfiles[0], hostkeys_find,
2140 	    ctx, ctx->host_str, ctx->ip_str,
2141 	    HKF_WANT_PARSE_KEY|HKF_WANT_MATCH)) != 0) {
2142 		error("%s: hostkeys_foreach failed: %s", __func__, ssh_err(r));
2143 		goto out;
2144 	}
2145 
2146 	/* Figure out if we have any new keys to add */
2147 	ctx->nnew = 0;
2148 	for (i = 0; i < ctx->nkeys; i++) {
2149 		if (!ctx->keys_seen[i])
2150 			ctx->nnew++;
2151 	}
2152 
2153 	debug3("%s: %zu keys from server: %zu new, %zu retained. %zu to remove",
2154 	    __func__, ctx->nkeys, ctx->nnew, ctx->nkeys - ctx->nnew, ctx->nold);
2155 
2156 	if (ctx->nnew == 0 && ctx->nold != 0) {
2157 		/* We have some keys to remove. Just do it. */
2158 		update_known_hosts(ctx);
2159 	} else if (ctx->nnew != 0) {
2160 		/*
2161 		 * We have received hitherto-unseen keys from the server.
2162 		 * Ask the server to confirm ownership of the private halves.
2163 		 */
2164 		debug3("%s: asking server to prove ownership for %zu keys",
2165 		    __func__, ctx->nnew);
2166 		if ((r = sshpkt_start(ssh, SSH2_MSG_GLOBAL_REQUEST)) != 0 ||
2167 		    (r = sshpkt_put_cstring(ssh,
2168 		    "hostkeys-prove-00@openssh.com")) != 0 ||
2169 		    (r = sshpkt_put_u8(ssh, 1)) != 0) /* bool: want reply */
2170 			fatal("%s: cannot prepare packet: %s",
2171 			    __func__, ssh_err(r));
2172 		if ((buf = sshbuf_new()) == NULL)
2173 			fatal("%s: sshbuf_new", __func__);
2174 		for (i = 0; i < ctx->nkeys; i++) {
2175 			if (ctx->keys_seen[i])
2176 				continue;
2177 			sshbuf_reset(buf);
2178 			if ((r = sshkey_putb(ctx->keys[i], buf)) != 0)
2179 				fatal("%s: sshkey_putb: %s",
2180 				    __func__, ssh_err(r));
2181 			if ((r = sshpkt_put_stringb(ssh, buf)) != 0)
2182 				fatal("%s: sshpkt_put_string: %s",
2183 				    __func__, ssh_err(r));
2184 		}
2185 		if ((r = sshpkt_send(ssh)) != 0)
2186 			fatal("%s: sshpkt_send: %s", __func__, ssh_err(r));
2187 		client_register_global_confirm(
2188 		    client_global_hostkeys_private_confirm, ctx);
2189 		ctx = NULL;  /* will be freed in callback */
2190 	}
2191 
2192 	/* Success */
2193  out:
2194 	hostkeys_update_ctx_free(ctx);
2195 	sshkey_free(key);
2196 	sshbuf_free(buf);
2197 	/*
2198 	 * NB. Return success for all cases. The server doesn't need to know
2199 	 * what the client does with its hosts file.
2200 	 */
2201 	return 1;
2202 }
2203 
2204 static int
2205 client_input_global_request(int type, u_int32_t seq, struct ssh *ssh)
2206 {
2207 	char *rtype;
2208 	u_char want_reply;
2209 	int r, success = 0;
2210 
2211 	if ((r = sshpkt_get_cstring(ssh, &rtype, NULL)) != 0 ||
2212 	    (r = sshpkt_get_u8(ssh, &want_reply)) != 0)
2213 		goto out;
2214 	debug("client_input_global_request: rtype %s want_reply %d",
2215 	    rtype, want_reply);
2216 	if (strcmp(rtype, "hostkeys-00@openssh.com") == 0)
2217 		success = client_input_hostkeys(ssh);
2218 	if (want_reply) {
2219 		if ((r = sshpkt_start(ssh, success ? SSH2_MSG_REQUEST_SUCCESS :
2220 		    SSH2_MSG_REQUEST_FAILURE)) != 0 ||
2221 		    (r = sshpkt_send(ssh)) != 0 ||
2222 		    (r = ssh_packet_write_wait(ssh)) != 0)
2223 			goto out;
2224 	}
2225 	r = 0;
2226  out:
2227 	free(rtype);
2228 	return r;
2229 }
2230 
2231 void
2232 client_session2_setup(struct ssh *ssh, int id, int want_tty, int want_subsystem,
2233     const char *term, struct termios *tiop, int in_fd, struct sshbuf *cmd,
2234     char **env)
2235 {
2236 	int i, j, matched, len, r;
2237 	char *name, *val;
2238 	Channel *c = NULL;
2239 
2240 	debug2("%s: id %d", __func__, id);
2241 
2242 	if ((c = channel_lookup(ssh, id)) == NULL)
2243 		fatal("%s: channel %d: unknown channel", __func__, id);
2244 
2245 	ssh_packet_set_interactive(ssh, want_tty,
2246 	    options.ip_qos_interactive, options.ip_qos_bulk);
2247 
2248 	if (want_tty) {
2249 		struct winsize ws;
2250 
2251 		/* Store window size in the packet. */
2252 		if (ioctl(in_fd, TIOCGWINSZ, &ws) < 0)
2253 			memset(&ws, 0, sizeof(ws));
2254 
2255 		channel_request_start(ssh, id, "pty-req", 1);
2256 		client_expect_confirm(ssh, id, "PTY allocation", CONFIRM_TTY);
2257 		if ((r = sshpkt_put_cstring(ssh, term != NULL ? term : ""))
2258 		    != 0 ||
2259 		    (r = sshpkt_put_u32(ssh, (u_int)ws.ws_col)) != 0 ||
2260 		    (r = sshpkt_put_u32(ssh, (u_int)ws.ws_row)) != 0 ||
2261 		    (r = sshpkt_put_u32(ssh, (u_int)ws.ws_xpixel)) != 0 ||
2262 		    (r = sshpkt_put_u32(ssh, (u_int)ws.ws_ypixel)) != 0)
2263 			fatal("%s: build packet: %s", __func__, ssh_err(r));
2264 		if (tiop == NULL)
2265 			tiop = get_saved_tio();
2266 		ssh_tty_make_modes(ssh, -1, tiop);
2267 		if ((r = sshpkt_send(ssh)) != 0)
2268 			fatal("%s: send packet: %s", __func__, ssh_err(r));
2269 		/* XXX wait for reply */
2270 		c->client_tty = 1;
2271 	}
2272 
2273 	/* Transfer any environment variables from client to server */
2274 	if (options.num_send_env != 0 && env != NULL) {
2275 		debug("Sending environment.");
2276 		for (i = 0; env[i] != NULL; i++) {
2277 			/* Split */
2278 			name = xstrdup(env[i]);
2279 			if ((val = strchr(name, '=')) == NULL) {
2280 				free(name);
2281 				continue;
2282 			}
2283 			*val++ = '\0';
2284 
2285 			matched = 0;
2286 			for (j = 0; j < options.num_send_env; j++) {
2287 				if (match_pattern(name, options.send_env[j])) {
2288 					matched = 1;
2289 					break;
2290 				}
2291 			}
2292 			if (!matched) {
2293 				debug3("Ignored env %s", name);
2294 				free(name);
2295 				continue;
2296 			}
2297 
2298 			debug("Sending env %s = %s", name, val);
2299 			channel_request_start(ssh, id, "env", 0);
2300 			if ((r = sshpkt_put_cstring(ssh, name)) != 0 ||
2301 			    (r = sshpkt_put_cstring(ssh, val)) != 0 ||
2302 			    (r = sshpkt_send(ssh)) != 0) {
2303 				fatal("%s: send packet: %s",
2304 				    __func__, ssh_err(r));
2305 			}
2306 			free(name);
2307 		}
2308 	}
2309 	for (i = 0; i < options.num_setenv; i++) {
2310 		/* Split */
2311 		name = xstrdup(options.setenv[i]);
2312 		if ((val = strchr(name, '=')) == NULL) {
2313 			free(name);
2314 			continue;
2315 		}
2316 		*val++ = '\0';
2317 
2318 		debug("Setting env %s = %s", name, val);
2319 		channel_request_start(ssh, id, "env", 0);
2320 		if ((r = sshpkt_put_cstring(ssh, name)) != 0 ||
2321 		    (r = sshpkt_put_cstring(ssh, val)) != 0 ||
2322 		    (r = sshpkt_send(ssh)) != 0)
2323 			fatal("%s: send packet: %s", __func__, ssh_err(r));
2324 		free(name);
2325 	}
2326 
2327 	len = sshbuf_len(cmd);
2328 	if (len > 0) {
2329 		if (len > 900)
2330 			len = 900;
2331 		if (want_subsystem) {
2332 			debug("Sending subsystem: %.*s",
2333 			    len, (const u_char*)sshbuf_ptr(cmd));
2334 			channel_request_start(ssh, id, "subsystem", 1);
2335 			client_expect_confirm(ssh, id, "subsystem",
2336 			    CONFIRM_CLOSE);
2337 		} else {
2338 			debug("Sending command: %.*s",
2339 			    len, (const u_char*)sshbuf_ptr(cmd));
2340 			channel_request_start(ssh, id, "exec", 1);
2341 			client_expect_confirm(ssh, id, "exec", CONFIRM_CLOSE);
2342 		}
2343 		if ((r = sshpkt_put_stringb(ssh, cmd)) != 0 ||
2344 		    (r = sshpkt_send(ssh)) != 0)
2345 			fatal("%s: send command: %s", __func__, ssh_err(r));
2346 	} else {
2347 		channel_request_start(ssh, id, "shell", 1);
2348 		client_expect_confirm(ssh, id, "shell", CONFIRM_CLOSE);
2349 		if ((r = sshpkt_send(ssh)) != 0) {
2350 			fatal("%s: send shell request: %s",
2351 			    __func__, ssh_err(r));
2352 		}
2353 	}
2354 }
2355 
2356 static void
2357 client_init_dispatch(struct ssh *ssh)
2358 {
2359 	ssh_dispatch_init(ssh, &dispatch_protocol_error);
2360 
2361 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_CLOSE, &channel_input_oclose);
2362 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_DATA, &channel_input_data);
2363 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_EOF, &channel_input_ieof);
2364 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_EXTENDED_DATA, &channel_input_extended_data);
2365 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_OPEN, &client_input_channel_open);
2366 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation);
2367 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure);
2368 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_REQUEST, &client_input_channel_req);
2369 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_WINDOW_ADJUST, &channel_input_window_adjust);
2370 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_SUCCESS, &channel_input_status_confirm);
2371 	ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_FAILURE, &channel_input_status_confirm);
2372 	ssh_dispatch_set(ssh, SSH2_MSG_GLOBAL_REQUEST, &client_input_global_request);
2373 
2374 	/* rekeying */
2375 	ssh_dispatch_set(ssh, SSH2_MSG_KEXINIT, &kex_input_kexinit);
2376 
2377 	/* global request reply messages */
2378 	ssh_dispatch_set(ssh, SSH2_MSG_REQUEST_FAILURE, &client_global_request_reply);
2379 	ssh_dispatch_set(ssh, SSH2_MSG_REQUEST_SUCCESS, &client_global_request_reply);
2380 }
2381 
2382 void
2383 client_stop_mux(void)
2384 {
2385 	if (options.control_path != NULL && muxserver_sock != -1)
2386 		unlink(options.control_path);
2387 	/*
2388 	 * If we are in persist mode, or don't have a shell, signal that we
2389 	 * should close when all active channels are closed.
2390 	 */
2391 	if (options.control_persist || no_shell_flag) {
2392 		session_closed = 1;
2393 		setproctitle("[stopped mux]");
2394 	}
2395 }
2396 
2397 /* client specific fatal cleanup */
2398 void
2399 cleanup_exit(int i)
2400 {
2401 	leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
2402 	leave_non_blocking();
2403 	if (options.control_path != NULL && muxserver_sock != -1)
2404 		unlink(options.control_path);
2405 	ssh_kill_proxy_command();
2406 	_exit(i);
2407 }
2408