1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.13 2005/06/11 21:09:51 asmodai Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# 18# The CPUTYPE variable controls which processor should be targeted for 19# generated code. This controls processor-specific optimizations in 20# certain code (currently only OpenSSL) as well as modifying the value 21# of CFLAGS to contain the appropriate optimization directive to gcc. 22# The automatic setting of CFLAGS may be overridden using the 23# NO_CPU_CFLAGS variable below. 24# Currently the following CPU types are recognized: 25# Intel x86 architecture: 26# (AMD CPUs) k7 k6-2 k6 k5 27# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 28# 29# If you experience any problems after setting this flag, please unset 30# it again before submitting a bug report or attempting to modify code. 31# It may be that certain types of software will become unstable after being 32# compiled with processor-specific (or higher - see below) optimization flags. 33# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 34# 35#CPUTYPE=i686 36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 38# 39# The CCVER variable controls which GCC-version to use by default. It 40# should be set using ?= so as not to interfere with CCVER overrides from 41# userland or the buildworld. We currently recommend that an override NOT 42# be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot 43# blocks, boot loader, or the kernel. 44# 45# CCVER?=gcc2 # (use GCC 2.95.x, default) 46# CCVER?=gcc34 # (use GCC 3.4, experimental) 47# 48# 49# CFLAGS controls the compiler settings used when compiling C code. 50# Note that optimization settings above -O (-O2, ...) are not recommended 51# or supported for compiling the world or the kernel - please revert any 52# nonstandard optimization settings to "-O" before submitting bug reports 53# to the developers. 54# 55#CFLAGS= -O -pipe 56# 57# CXXFLAGS controls the compiler settings used when compiling C++ code. 58# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 59# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 60# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 61# 62#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 63# 64# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 65# for use in developing FreeBSD and testing changes. They can be used by 66# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 67# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 68# 69BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 70 -Wcast-qual -Wchar-subscripts -Winline \ 71 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 72 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 73# 74# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 75# 76#WARNS_WERROR= yes 77# 78# To compile just the kernel with special optimizations, you should use 79# this instead of CFLAGS (which is not applicable to kernel builds anyway). 80# There is very little to gain by using higher optimization levels, and doing 81# so can cause problems. 82# 83#COPTFLAGS= -O -pipe 84# 85# Strip the file before installing. Setting this to nothing will keep 86# the debugging symbols in the installed files. 87#STRIP= -s 88# 89# Compare before install 90#INSTALL=install -C 91# 92# To enable installing suidperl with the setuid bit turned on 93#ENABLE_SUIDPERL= true 94# 95# To build ppp with normal permissions 96#PPP_NOSUID= true 97# 98# To enable installing ssh(1) with the setuid bit turned on 99#ENABLE_SUID_SSH= true 100# 101# To avoid building various parts of the base system: 102#NO_CVS= true # do not build CVS 103#NO_BIND= true # do not build BIND 104#NO_FORTRAN= true # do not build g77 and related libraries 105#NO_I4B= true # do not build isdn4bsd package 106#NO_IPFILTER= true # do not build IP Filter package 107#NO_LPR= true # do not build lpr and related programs 108#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 109#NO_MODULES= true # do not build modules with the kernel 110#NO_OBJC= true # do not build Objective C support 111#NO_OPENSSH= true # do not build OpenSSH 112#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 113#NO_PKGTOOLS= true # do not build included package tools (for pkgsrc) 114#NO_SENDMAIL= true # do not build sendmail and related programs 115#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 116#NO_X= true # do not compile in XWindows support (e.g. doscmd) 117#NOCRYPT= true # do not build any crypto code 118#NOGAMES= true # do not build games (games/ subdir) 119#NOINFO= true # do not make or install info files 120#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 121#NOMAN= true # do not build manual pages 122#NOPROFILE= true # Avoid compiling profiled libraries 123#NOSHARE= true # do not go into the share subdir 124# 125# To build sys/modules when building the world (our old way of doing things) 126#MODULES_WITH_WORLD=true # do not build modules when building kernel 127# 128# The list of modules to build instead of all of them. 129#MODULES_OVERRIDE= emulation/linux net/ipfw 130# 131# The following controls building optional IDEA code in libcrypto and 132# certain ports. Patents are involved - you must not use this unless 133# you either have a license or fall within patent 'fair use' 134# provisions. 135# 136# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 137# 138# IDEA is patented in the USA and many European countries - thought to 139# be OK to use for any non-commercial use. This is optional. 140#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 141# 142# To avoid running MAKEDEV all on /dev during install: 143#NO_MAKEDEV= true 144# 145# If you do not want unformatted manual pages to be compressed 146# when they are installed: 147# 148#NOMANCOMPRESS= true 149# 150# 151# If you want the "compat" shared libraries installed as part of your normal 152# builds, uncomment these: 153# 154#COMPAT1X= yes 155#COMPAT20= yes 156#COMPAT21= yes 157#COMPAT22= yes 158#COMPAT3X= yes 159#COMPAT4X= yes 160# 161# 162# If you do not want additional documentation (some of which are 163# a few hundred KB's) for ports to be installed: 164# 165#NOPORTDOCS= true 166# 167# 168# Default format for system documentation, depends on your printer. 169# Set this to "ascii" for simple printers or screen 170# 171#PRINTERDEVICE= ps 172# 173# 174# How long to wait for a console keypress before booting the default kernel. 175# This value is approximately in milliseconds. Keypresses are accepted by the 176# BIOS before booting from disk, making it possible to give custom boot 177# parameters even when this is set to 0. 178# 179#BOOTWAIT=0 180#BOOTWAIT=30000 181# 182# By default, the system will always use the keyboard/video card as system 183# console. However, the boot blocks may be dynamically configured to use a 184# serial port in addition to or instead of the keyboard/video console. 185# 186# By default we use COM1 as our serial console port *if* we're going to use 187# a serial port as our console at all. Alter as necessary. 188# 189# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 190# 191#BOOT_COMCONSOLE_PORT= 0x3F8 192# 193# The default serial console speed is 9600. Set the speed to a larger value 194# for better interactive response. 195# 196#BOOT_COMCONSOLE_SPEED= 115200 197# 198# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 199# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 200# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 201# still mount the server's '/' (i.e. rather than load the server's kernel). 202# 203#LOADER_TFTP_SUPPORT= YES 204# 205# By default, the ports collection attempts to use XFree86 4.X. If 206# you are running XFree86 3.3.X, uncomment this line. 207# 208#XFREE86_VERSION= 3 209# 210# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 211# If you have a XFree86 from before 3.0 that has the X distribution in 212# /usr/X386, you want to uncomment this. 213# 214#X11BASE= /usr/X386 215# 216# 217# If you have Motif on your system, uncomment this. 218# 219#HAVE_MOTIF= yes 220#MOTIF_STATIC= yes 221# 222# If the default location of the Motif library (specified below) is NOT 223# appropriate for you, uncomment this and change it to the correct value. 224# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 225# 226#MOTIFLIB= -L${X11BASE}/lib -lXm 227# 228# 229# If you're resident in the USA, this will help various ports to determine 230# whether or not they should attempt to comply with the various U.S. 231# export regulations on certain types of software which do not apply to 232# anyone else in the world. 233# 234#USA_RESIDENT= YES 235# 236# 237# Override "don't install a port that's already installed" behavior. 238# One might wish to do this for ports debugging or to unconditionally 239# reinstall a set of suspect/broken ports. 240# 241#FORCE_PKG_REGISTER= YES 242# 243# 244# If you're behind a firewall and need FTP or HTTP proxy services for 245# ports collection fetching to work, the following examples give the 246# necessary syntax. See the fetch(3) man page for details. 247# 248#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21 249#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80 250# 251# 252# Port master sites. 253# 254# If you want your port fetches to go somewhere else than the default 255# (specified below) in case the distfile/patchfile was not found, 256# uncomment this and change it to a location nearest you. (Don't 257# remove the "/${DIST_SUBDIR}/" part.) 258# 259#MASTER_SITE_BACKUP?= \ 260# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 261# 262# If you want your port fetches to check the above site first (before 263# the MASTER_SITES specified in the port Makefiles), uncomment the 264# line below. You can also change the right side to point to wherever 265# you want. 266# 267#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 268# 269# Some ports use a special variable to point to a collection of 270# mirrors of well-known software archives. If you have a mirror close 271# to you, uncomment any of the following lines and change it to that 272# address. (Don't remove the "/%SUBDIR%/" part.) 273# 274# Note: the right hand sides of the following lines are only for your 275# information. For a full list of default sites, take a look at 276# bsd.sites.mk. 277# 278#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 279#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 280#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/ 281#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/ 282#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 283#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 284#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ 285#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ 286#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ 287#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 288#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ 289#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ 290#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/ 291#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ 292#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ 293#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 294#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ 295#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 296#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ 297#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 298#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 299#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ 300#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ 301# 302# Also it is highly recommended that you configure MASTER_SORT_REGEX 303# to choose better mirror sites for you. List awk(1)-style regular 304# expressions separated by space so MASTER_SITES will be sorted in 305# that order. The following example is for Japanese users; change 306# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 307# of your nearest/upstream networks to meet your needs. 308# 309#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.] 310# 311# Ports can place their working directories somewhere other than under 312# /usr/ports. 313#WRKDIRPREFIX= /var/tmp 314# 315# Kerberos 5 316# If you want Kerberos 5 (KTH Heimdal), define this: 317# 318#MAKE_KERBEROS5= yes 319# 320# Kerberos 5 su (k5su) 321# If you want to use the k5su utility, define this to have it installed 322# set-user-ID. 323#ENABLE_SUID_K5SU= yes 324# 325# 326# Kerberos5 327# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 328# define this (this is also used to tell ssh1 that kerberos is needed): 329# 330#KRB5_HOME= /usr/local 331# 332# 333# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 334# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 335# information on CVSup and these files). To use, do "make update" in /usr/src. 336# 337#SUP_UPDATE= yes 338# 339#SUP= /usr/local/bin/cvsup 340#SUPFLAGS= -g -L 2 341#SUPHOST= cvsup.uk.FreeBSD.org 342#SUPFILE= /usr/share/examples/cvsup/stable-supfile 343#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 344#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 345# 346# top(1) uses a hash table for the user names. The size of this hash 347# can be tuned to match the number of local users. The table size should 348# be a prime number approximately twice as large as the number of lines in 349# /etc/passwd. The default number is 20011. 350# 351#TOP_TABLE_SIZE= 101 352# 353# Documentation 354# 355# The list of languages and encodings to build and install 356# 357#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 358# 359# 360# sendmail 361# 362# The following sets the default m4 configuration file to use at 363# install time. Use with caution as a make install will overwrite 364# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 365# deprecated. The value should be a fully qualified path name. 366# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 367# create /etc/mail/sendmail.cf before installworld installs an 368# updated sendmail binary. 369# 370#SENDMAIL_MC=/etc/mail/myconfig.mc 371# 372# The following sets the default m4 configuration file for mail 373# submission to use at install time. Use with caution as a make 374# install will overwrite any existing /etc/mail/submit.cf. The 375# value should be a fully qualified path name. 376# Avoid using a value of /etc/mail/submit.mc as a buildworld will 377# create /etc/mail/submit.cf before installworld installs an 378# updated sendmail binary. 379# 380#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 381# 382# If you need to build additional .cf files during a make buildworld, 383# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 384# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 385# create /etc/mail/sendmail.cf before installworld installs an 386# updated sendmail binary. 387# 388#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 389# 390# Setting the following variable modifies the flags passed to m4 when 391# building a .cf file from a .mc file. It can be used to enable 392# features disabled by default. 393# 394#SENDMAIL_M4_FLAGS= 395# 396# Setting the following variables modifies the build environment for 397# sendmail and its related utilities. For example, SASL support can be 398# added with settings such as: 399# 400# with SASLv1: 401# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 402# SENDMAIL_LDFLAGS=-L/usr/local/lib 403# SENDMAIL_LDADD=-lsasl 404# 405# with SASLv2: 406# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 407# SENDMAIL_LDFLAGS=-L/usr/local/lib 408# SENDMAIL_LDADD=-lsasl2 409# 410# Note: If you are using Cyrus SASL with other applications which require 411# access to the sasldb file, you should add the following to your 412# sendmail.mc file: 413# 414# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 415# 416#SENDMAIL_CFLAGS= 417#SENDMAIL_LDFLAGS= 418#SENDMAIL_LDADD= 419#SENDMAIL_DPADD= 420# 421# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 422# set-user-ID root binary instead of a set-group-ID smmsp binary and will 423# prevent the installation of /etc/mail/submit.cf. 424# This is a deprecated mode of operation. See etc/mail/README for more 425# information. 426# 427#SENDMAIL_SET_USER_ID= 428# 429# The permissions to use on alias and map databases generated using 430# /etc/mail/Makefile. Defaults to 0640. 431# 432#SENDMAIL_MAP_PERMS= 433