1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.12 2005/03/01 18:45:37 asmodai Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# 18# The CPUTYPE variable controls which processor should be targeted for 19# generated code. This controls processor-specific optimizations in 20# certain code (currently only OpenSSL) as well as modifying the value 21# of CFLAGS to contain the appropriate optimization directive to gcc. 22# The automatic setting of CFLAGS may be overridden using the 23# NO_CPU_CFLAGS variable below. 24# Currently the following CPU types are recognized: 25# Intel x86 architecture: 26# (AMD CPUs) k7 k6-2 k6 k5 27# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 28# 29# If you experience any problems after setting this flag, please unset 30# it again before submitting a bug report or attempting to modify code. 31# It may be that certain types of software will become unstable after being 32# compiled with processor-specific (or higher - see below) optimization flags. 33# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 34# 35#CPUTYPE=i686 36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 38# 39# The CCVER variable controls which GCC-version to use by default. It 40# should be set using ?= so as not to interfere with CCVER overrides from 41# userland or the buildworld. We currently recommend that an override NOT 42# be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot 43# blocks, boot loader, or the kernel. 44# 45# CCVER?=gcc2 # (use GCC 2.95.x, default) 46# CCVER?=gcc34 # (use GCC 3.4, experimental) 47# 48# 49# CFLAGS controls the compiler settings used when compiling C code. 50# Note that optimization settings above -O (-O2, ...) are not recommended 51# or supported for compiling the world or the kernel - please revert any 52# nonstandard optimization settings to "-O" before submitting bug reports 53# to the developers. 54# 55#CFLAGS= -O -pipe 56# 57# CXXFLAGS controls the compiler settings used when compiling C++ code. 58# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 59# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 60# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 61# 62#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 63# 64# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 65# for use in developing FreeBSD and testing changes. They can be used by 66# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 67# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 68# 69BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 70 -Wcast-qual -Wchar-subscripts -Winline \ 71 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 72 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 73# 74# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 75# 76#WARNS_WERROR= yes 77# 78# To compile just the kernel with special optimizations, you should use 79# this instead of CFLAGS (which is not applicable to kernel builds anyway). 80# There is very little to gain by using higher optimization levels, and doing 81# so can cause problems. 82# 83#COPTFLAGS= -O -pipe 84# 85# Strip the file before installing. Setting this to nothing will keep 86# the debugging symbols in the installed files. 87#STRIP= -s 88# 89# Compare before install 90#INSTALL=install -C 91# 92# To enable installing suidperl with the setuid bit turned on 93#ENABLE_SUIDPERL= true 94# 95# To build ppp with normal permissions 96#PPP_NOSUID= true 97# 98# To enable installing ssh(1) with the setuid bit turned on 99#ENABLE_SUID_SSH= true 100# 101# To avoid building various parts of the base system: 102#NO_CVS= true # do not build CVS 103#NO_BIND= true # do not build BIND 104#NO_FORTRAN= true # do not build g77 and related libraries 105#NO_I4B= true # do not build isdn4bsd package 106#NO_IPFILTER= true # do not build IP Filter package 107#NO_LPR= true # do not build lpr and related programs 108#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 109#NO_MODULES= true # do not build modules with the kernel 110#NO_OBJC= true # do not build Objective C support 111#NO_OPENSSH= true # do not build OpenSSH 112#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 113#NO_SENDMAIL= true # do not build sendmail and related programs 114#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 115#NO_X= true # do not compile in XWindows support (e.g. doscmd) 116#NOCRYPT= true # do not build any crypto code 117#NOGAMES= true # do not build games (games/ subdir) 118#NOINFO= true # do not make or install info files 119#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 120#NOMAN= true # do not build manual pages 121#NOPROFILE= true # Avoid compiling profiled libraries 122#NOSHARE= true # do not go into the share subdir 123# 124# To build sys/modules when building the world (our old way of doing things) 125#MODULES_WITH_WORLD=true # do not build modules when building kernel 126# 127# The list of modules to build instead of all of them. 128#MODULES_OVERRIDE= emulation/linux net/ipfw 129# 130# The following controls building optional IDEA code in libcrypto and 131# certain ports. Patents are involved - you must not use this unless 132# you either have a license or fall within patent 'fair use' 133# provisions. 134# 135# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 136# 137# IDEA is patented in the USA and many European countries - thought to 138# be OK to use for any non-commercial use. This is optional. 139#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 140# 141# To avoid running MAKEDEV all on /dev during install: 142#NO_MAKEDEV= true 143# 144# If you do not want unformatted manual pages to be compressed 145# when they are installed: 146# 147#NOMANCOMPRESS= true 148# 149# 150# If you want the "compat" shared libraries installed as part of your normal 151# builds, uncomment these: 152# 153#COMPAT1X= yes 154#COMPAT20= yes 155#COMPAT21= yes 156#COMPAT22= yes 157#COMPAT3X= yes 158#COMPAT4X= yes 159# 160# 161# If you do not want additional documentation (some of which are 162# a few hundred KB's) for ports to be installed: 163# 164#NOPORTDOCS= true 165# 166# 167# Default format for system documentation, depends on your printer. 168# Set this to "ascii" for simple printers or screen 169# 170#PRINTERDEVICE= ps 171# 172# 173# How long to wait for a console keypress before booting the default kernel. 174# This value is approximately in milliseconds. Keypresses are accepted by the 175# BIOS before booting from disk, making it possible to give custom boot 176# parameters even when this is set to 0. 177# 178#BOOTWAIT=0 179#BOOTWAIT=30000 180# 181# By default, the system will always use the keyboard/video card as system 182# console. However, the boot blocks may be dynamically configured to use a 183# serial port in addition to or instead of the keyboard/video console. 184# 185# By default we use COM1 as our serial console port *if* we're going to use 186# a serial port as our console at all. Alter as necessary. 187# 188# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 189# 190#BOOT_COMCONSOLE_PORT= 0x3F8 191# 192# The default serial console speed is 9600. Set the speed to a larger value 193# for better interactive response. 194# 195#BOOT_COMCONSOLE_SPEED= 115200 196# 197# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 198# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 199# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 200# still mount the server's '/' (i.e. rather than load the server's kernel). 201# 202#LOADER_TFTP_SUPPORT= YES 203# 204# By default, the ports collection attempts to use XFree86 4.X. If 205# you are running XFree86 3.3.X, uncomment this line. 206# 207#XFREE86_VERSION= 3 208# 209# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 210# If you have a XFree86 from before 3.0 that has the X distribution in 211# /usr/X386, you want to uncomment this. 212# 213#X11BASE= /usr/X386 214# 215# 216# If you have Motif on your system, uncomment this. 217# 218#HAVE_MOTIF= yes 219#MOTIF_STATIC= yes 220# 221# If the default location of the Motif library (specified below) is NOT 222# appropriate for you, uncomment this and change it to the correct value. 223# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 224# 225#MOTIFLIB= -L${X11BASE}/lib -lXm 226# 227# 228# If you're resident in the USA, this will help various ports to determine 229# whether or not they should attempt to comply with the various U.S. 230# export regulations on certain types of software which do not apply to 231# anyone else in the world. 232# 233#USA_RESIDENT= YES 234# 235# 236# Override "don't install a port that's already installed" behavior. 237# One might wish to do this for ports debugging or to unconditionally 238# reinstall a set of suspect/broken ports. 239# 240#FORCE_PKG_REGISTER= YES 241# 242# 243# If you're behind a firewall and need FTP or HTTP proxy services for 244# ports collection fetching to work, the following examples give the 245# necessary syntax. See the fetch(3) man page for details. 246# 247#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21 248#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80 249# 250# 251# Port master sites. 252# 253# If you want your port fetches to go somewhere else than the default 254# (specified below) in case the distfile/patchfile was not found, 255# uncomment this and change it to a location nearest you. (Don't 256# remove the "/${DIST_SUBDIR}/" part.) 257# 258#MASTER_SITE_BACKUP?= \ 259# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 260# 261# If you want your port fetches to check the above site first (before 262# the MASTER_SITES specified in the port Makefiles), uncomment the 263# line below. You can also change the right side to point to wherever 264# you want. 265# 266#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 267# 268# Some ports use a special variable to point to a collection of 269# mirrors of well-known software archives. If you have a mirror close 270# to you, uncomment any of the following lines and change it to that 271# address. (Don't remove the "/%SUBDIR%/" part.) 272# 273# Note: the right hand sides of the following lines are only for your 274# information. For a full list of default sites, take a look at 275# bsd.sites.mk. 276# 277#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 278#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 279#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/ 280#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/ 281#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 282#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 283#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ 284#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ 285#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ 286#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 287#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ 288#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ 289#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/ 290#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ 291#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ 292#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 293#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ 294#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 295#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ 296#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 297#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 298#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ 299#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ 300# 301# Also it is highly recommended that you configure MASTER_SORT_REGEX 302# to choose better mirror sites for you. List awk(1)-style regular 303# expressions separated by space so MASTER_SITES will be sorted in 304# that order. The following example is for Japanese users; change 305# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 306# of your nearest/upstream networks to meet your needs. 307# 308#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.] 309# 310# Ports can place their working directories somewhere other than under 311# /usr/ports. 312#WRKDIRPREFIX= /var/tmp 313# 314# Kerberos 5 315# If you want Kerberos 5 (KTH Heimdal), define this: 316# 317#MAKE_KERBEROS5= yes 318# 319# Kerberos 5 su (k5su) 320# If you want to use the k5su utility, define this to have it installed 321# set-user-ID. 322#ENABLE_SUID_K5SU= yes 323# 324# 325# Kerberos5 326# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 327# define this (this is also used to tell ssh1 that kerberos is needed): 328# 329#KRB5_HOME= /usr/local 330# 331# 332# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 333# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 334# information on CVSup and these files). To use, do "make update" in /usr/src. 335# 336#SUP_UPDATE= yes 337# 338#SUP= /usr/local/bin/cvsup 339#SUPFLAGS= -g -L 2 340#SUPHOST= cvsup.uk.FreeBSD.org 341#SUPFILE= /usr/share/examples/cvsup/stable-supfile 342#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 343#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 344# 345# top(1) uses a hash table for the user names. The size of this hash 346# can be tuned to match the number of local users. The table size should 347# be a prime number approximately twice as large as the number of lines in 348# /etc/passwd. The default number is 20011. 349# 350#TOP_TABLE_SIZE= 101 351# 352# Documentation 353# 354# The list of languages and encodings to build and install 355# 356#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 357# 358# 359# sendmail 360# 361# The following sets the default m4 configuration file to use at 362# install time. Use with caution as a make install will overwrite 363# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 364# deprecated. The value should be a fully qualified path name. 365# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 366# create /etc/mail/sendmail.cf before installworld installs an 367# updated sendmail binary. 368# 369#SENDMAIL_MC=/etc/mail/myconfig.mc 370# 371# The following sets the default m4 configuration file for mail 372# submission to use at install time. Use with caution as a make 373# install will overwrite any existing /etc/mail/submit.cf. The 374# value should be a fully qualified path name. 375# Avoid using a value of /etc/mail/submit.mc as a buildworld will 376# create /etc/mail/submit.cf before installworld installs an 377# updated sendmail binary. 378# 379#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 380# 381# If you need to build additional .cf files during a make buildworld, 382# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 383# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 384# create /etc/mail/sendmail.cf before installworld installs an 385# updated sendmail binary. 386# 387#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 388# 389# Setting the following variable modifies the flags passed to m4 when 390# building a .cf file from a .mc file. It can be used to enable 391# features disabled by default. 392# 393#SENDMAIL_M4_FLAGS= 394# 395# Setting the following variables modifies the build environment for 396# sendmail and its related utilities. For example, SASL support can be 397# added with settings such as: 398# 399# with SASLv1: 400# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 401# SENDMAIL_LDFLAGS=-L/usr/local/lib 402# SENDMAIL_LDADD=-lsasl 403# 404# with SASLv2: 405# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 406# SENDMAIL_LDFLAGS=-L/usr/local/lib 407# SENDMAIL_LDADD=-lsasl2 408# 409# Note: If you are using Cyrus SASL with other applications which require 410# access to the sasldb file, you should add the following to your 411# sendmail.mc file: 412# 413# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 414# 415#SENDMAIL_CFLAGS= 416#SENDMAIL_LDFLAGS= 417#SENDMAIL_LDADD= 418#SENDMAIL_DPADD= 419# 420# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 421# set-user-ID root binary instead of a set-group-ID smmsp binary and will 422# prevent the installation of /etc/mail/submit.cf. 423# This is a deprecated mode of operation. See etc/mail/README for more 424# information. 425# 426#SENDMAIL_SET_USER_ID= 427# 428# The permissions to use on alias and map databases generated using 429# /etc/mail/Makefile. Defaults to 0640. 430# 431#SENDMAIL_MAP_PERMS= 432