1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 8# It allows you to override macro definitions to make without changing 9# your source tree, or anything the source tree installs. 10# 11# This file must be in valid Makefile syntax. 12# 13# You have to find the things you can put here in the Makefiles and 14# documentation of the source tree. 15# 16# The CPUTYPE variable controls which processor should be targeted for 17# generated code. This controls processor-specific optimizations in 18# certain code (currently only OpenSSL) as well as modifying the value 19# of CFLAGS to contain the appropriate optimization directive to gcc. 20# The automatic setting of CFLAGS may be overridden using the 21# NO_CPU_CFLAGS variable below. 22# Currently the following CPU types are recognized: 23# Intel x86 architecture: 24# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 25# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 26# 27# If you experience any problems after setting this flag, please unset 28# it again before submitting a bug report or attempting to modify code. 29# It may be that certain types of software will become unstable after being 30# compiled with processor-specific (or higher - see below) optimization flags. 31# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 32# 33#CPUTYPE=i686 34#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 35#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 36# 37# The CCVER variable controls which GCC-version to use by default. It 38# should be set using ?= so as not to interfere with CCVER overrides from 39# userland or the buildworld. Note that building world or the kernel using 40# an experimental compiler might be broken at any time. We currently 41# recommend that an override NOT be set in /etc/make.conf. 42# 43#CCVER?=gcc44 # (use GCC 4.4, default) 44# 45# CFLAGS controls the compiler settings used when compiling C code. 46# Note that optimization settings above -O (-O2, ...) are not recommended 47# or supported for compiling the world or the kernel - please revert any 48# nonstandard optimization settings to "-O" before submitting bug reports 49# to the developers. 50# 51#CFLAGS= -O -pipe 52# 53# CXXFLAGS controls the compiler settings used when compiling C++ code. 54# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 55# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 56# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 57# 58#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 59# 60# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 61# for use in developing FreeBSD and testing changes. They can be used by 62# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 63# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 64# 65BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 66 -Wcast-qual -Wchar-subscripts -Winline \ 67 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 68 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 69# 70# To compile just the kernel with special optimizations, you should use 71# this instead of CFLAGS (which is not applicable to kernel builds anyway). 72# There is very little to gain by using higher optimization levels, and doing 73# so can cause problems. 74# 75#COPTFLAGS= -O -pipe 76# 77# Strip the file before installing. Setting this to nothing will keep 78# the debugging symbols in the installed files. 79#STRIP= -s 80# 81# Compare before install 82#INSTALL=install -C 83# 84# To build ppp with normal permissions 85#PPP_NOSUID= true 86# 87# To enable installing ssh(1) with the setuid bit turned on 88#ENABLE_SUID_SSH= true 89# 90# Default thread library (c_r or thread_xu) 91THREAD_LIB?= thread_xu 92# 93# To enable Hesiod support in libc 94#WANT_HESIOD= true 95# 96# To disable name caching in the nsswitch subsystem. The generic caching 97# daemon, nscd(8), will not be built either if this option is set. 98#NO_NS_CACHING= true 99# 100# To avoid building various parts of the base system: 101#NO_BINUTILS221=true # do not build binutils-2.21 102#NO_CRYPT= true # do not build crypto code 103#NO_CVS= true # do not build CVS 104#NO_GAMES= true # do not enter the games subdirectory 105#NO_GCC41= true # do not build gcc-4.1 106#NO_GDB= true # do not build GDB 107#NO_I4B= true # do not build isdn4bsd package 108#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) 109#NO_LPR= true # do not build lpr and related programs 110#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 111#NO_MODULES= true # do not build modules with the kernel 112#NO_OBJC= true # do not build Objective C support 113#NO_OPENSSH= true # do not build OpenSSH 114#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 115#NO_SENDMAIL= true # do not build sendmail and related programs 116#NO_SHARE= true # do not enter the share subdirectory 117#NO_X= true # do not compile in XWindows support (e.g. doscmd) 118#NOINFO= true # do not make or install info files 119#NOINFOCOMPRESS=true # do not compress info files 120#NOMAN= true # do not build manual pages 121#NOMANCOMPRESS= true # do not compress man pages 122#NOPROFILE= true # Avoid compiling profiled libraries 123# 124# To build sys/modules when building the world (our old way of doing things) 125#MODULES_WITH_WORLD=true # do not build modules when building kernel 126# 127# The list of modules to build instead of all of them. 128#MODULES_OVERRIDE= emulation/linux net/ipfw 129# 130# The following controls building optional IDEA code in libcrypto. 131# Patents are involved - you must not use this unless 132# you either have a license or fall within patent 'fair use' 133# provisions. 134# 135# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 136# 137# IDEA is patented in the USA and many European countries - thought to 138# be OK to use for any non-commercial use. This is optional. 139#WANT_IDEA= YES # IDEA (128 bit symmetric encryption) 140# 141# The paper size for groff(1), either "letter" or "A4" 142#GROFF_PAPER_SIZE= letter 143# 144# Default format for system documentation, depends on your printer. 145# Set this to "ascii" for simple printers or screen 146# 147#PRINTERDEVICE= ps 148# 149# By default, the system will always use the keyboard/video card as system 150# console. However, the boot blocks may be dynamically configured to use a 151# serial port in addition to or instead of the keyboard/video console. 152# 153# By default we use COM1 as our serial console port *if* we're going to use 154# a serial port as our console at all. Alter as necessary. 155# 156# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 157# 158#BOOT_COMCONSOLE_PORT= 0x3F8 159# 160# The default serial console speed is 9600. Set the speed to a larger value 161# for better interactive response. 162# 163#BOOT_COMCONSOLE_SPEED= 115200 164# 165# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 166# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 167# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 168# still mount the server's '/' (i.e. rather than load the server's kernel). 169# 170#LOADER_TFTP_SUPPORT= YES 171# 172# To build the installer as part of buildworld. 173#WANT_INSTALLER=yes 174# 175# Documentation 176# 177# The list of languages and encodings to build and install 178# 179#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 180# 181# The list of locale modules to be compiled-in in the static 182# libc.a (and profile/libc.a). 183#STATIC_LOCALES=BIG5 EUC EUCTW ISO2022 MSKanji UTF8 184STATIC_LOCALES=UTF8 185# sendmail 186# 187# The following sets the default m4 configuration file to use at 188# install time. Use with caution as a make install will overwrite 189# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 190# deprecated. The value should be a fully qualified path name. 191# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 192# create /etc/mail/sendmail.cf before installworld installs an 193# updated sendmail binary. 194# 195#SENDMAIL_MC=/etc/mail/myconfig.mc 196# 197# The following sets the default m4 configuration file for mail 198# submission to use at install time. Use with caution as a make 199# install will overwrite any existing /etc/mail/submit.cf. The 200# value should be a fully qualified path name. 201# Avoid using a value of /etc/mail/submit.mc as a buildworld will 202# create /etc/mail/submit.cf before installworld installs an 203# updated sendmail binary. 204# 205#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 206# 207# If you need to build additional .cf files during a make buildworld, 208# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 209# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 210# create /etc/mail/sendmail.cf before installworld installs an 211# updated sendmail binary. 212# 213#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 214# 215# Setting the following variable modifies the flags passed to m4 when 216# building a .cf file from a .mc file. It can be used to enable 217# features disabled by default. 218# 219#SENDMAIL_M4_FLAGS= 220# 221# Setting the following variables modifies the build environment for 222# sendmail and its related utilities. For example, SASL support can be 223# added with settings such as: 224# 225# with SASLv1: 226# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 227# SENDMAIL_LDFLAGS=-L/usr/local/lib 228# SENDMAIL_LDADD=-lsasl 229# 230# with SASLv2: 231# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 232# SENDMAIL_LDFLAGS=-L/usr/local/lib 233# SENDMAIL_LDADD=-lsasl2 234# 235# Note: If you are using Cyrus SASL with other applications which require 236# access to the sasldb file, you should add the following to your 237# sendmail.mc file: 238# 239# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 240# 241#SENDMAIL_CFLAGS= 242#SENDMAIL_LDFLAGS= 243#SENDMAIL_LDADD= 244#SENDMAIL_DPADD= 245# 246# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 247# set-user-ID root binary instead of a set-group-ID smmsp binary and will 248# prevent the installation of /etc/mail/submit.cf. 249# This is a deprecated mode of operation. See etc/mail/README for more 250# information. 251# 252#SENDMAIL_SET_USER_ID= 253# 254# The permissions to use on alias and map databases generated using 255# /etc/mail/Makefile. Defaults to 0640. 256# 257#SENDMAIL_MAP_PERMS= 258