1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.38 2008/11/03 00:25:44 pavalos Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# The CPUTYPE variable controls which processor should be targeted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognized: 24# Intel x86 architecture: 25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 26# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 27# 28# If you experience any problems after setting this flag, please unset 29# it again before submitting a bug report or attempting to modify code. 30# It may be that certain types of software will become unstable after being 31# compiled with processor-specific (or higher - see below) optimization flags. 32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 33# 34#CPUTYPE=i686 35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 37# 38# The CCVER variable controls which GCC-version to use by default. It 39# should be set using ?= so as not to interfere with CCVER overrides from 40# userland or the buildworld. Note that building world or the kernel using 41# an experimental compiler might be broken at any time. We currently 42# recommend that an override NOT be set in /etc/make.conf. 43# 44#CCVER?=gcc41 # (use GCC 4.1, default) 45# 46# CFLAGS controls the compiler settings used when compiling C code. 47# Note that optimization settings above -O (-O2, ...) are not recommended 48# or supported for compiling the world or the kernel - please revert any 49# nonstandard optimization settings to "-O" before submitting bug reports 50# to the developers. 51# 52#CFLAGS= -O -pipe 53# 54# CXXFLAGS controls the compiler settings used when compiling C++ code. 55# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 56# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 57# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 58# 59#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 60# 61# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 62# for use in developing FreeBSD and testing changes. They can be used by 63# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 64# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 65# 66BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 67 -Wcast-qual -Wchar-subscripts -Winline \ 68 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 69 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 70# 71# To compile just the kernel with special optimizations, you should use 72# this instead of CFLAGS (which is not applicable to kernel builds anyway). 73# There is very little to gain by using higher optimization levels, and doing 74# so can cause problems. 75# 76#COPTFLAGS= -O -pipe 77# 78# Strip the file before installing. Setting this to nothing will keep 79# the debugging symbols in the installed files. 80#STRIP= -s 81# 82# Compare before install 83#INSTALL=install -C 84# 85# To build ppp with normal permissions 86#PPP_NOSUID= true 87# 88# To enable installing ssh(1) with the setuid bit turned on 89#ENABLE_SUID_SSH= true 90# 91# Default thread library (c_r or thread_xu) 92THREAD_LIB?= thread_xu 93# 94# To enable Hesiod support in libc 95#WANT_HESIOD= true 96# 97# To disable name caching in the nsswitch subsystem. The generic caching 98# daemon, nscd(8), will not be built either if this option is set. 99#NO_NS_CACHING= true 100# 101# To avoid building various parts of the base system: 102#NO_BIND= true # do not build BIND 103#NO_CRYPT= true # do not build crypto code 104#NO_CVS= true # do not build CVS 105#NO_GAMES= true # do not enter the games subdirectory 106#NO_GCC44= true # do not build gcc-4.4 107#NO_GDB= true # do not build GDB 108#NO_I4B= true # do not build isdn4bsd package 109#NO_IPFILTER= true # do not build IP Filter package 110#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) 111#NO_LPR= true # do not build lpr and related programs 112#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 113#NO_MODULES= true # do not build modules with the kernel 114#NO_OBJC= true # do not build Objective C support 115#NO_OPENSSH= true # do not build OpenSSH 116#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 117#NO_SENDMAIL= true # do not build sendmail and related programs 118#NO_SHARE= true # do not enter the share subdirectory 119#NO_X= true # do not compile in XWindows support (e.g. doscmd) 120#NOINFO= true # do not make or install info files 121#NOINFOCOMPRESS=true # do not compress info files 122#NOMAN= true # do not build manual pages 123#NOMANCOMPRESS= true # do not compress man pages 124#NOPROFILE= true # Avoid compiling profiled libraries 125# 126# To build sys/modules when building the world (our old way of doing things) 127#MODULES_WITH_WORLD=true # do not build modules when building kernel 128# 129# The list of modules to build instead of all of them. 130#MODULES_OVERRIDE= emulation/linux net/ipfw 131# 132# The following controls building optional IDEA code in libcrypto. 133# Patents are involved - you must not use this unless 134# you either have a license or fall within patent 'fair use' 135# provisions. 136# 137# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 138# 139# IDEA is patented in the USA and many European countries - thought to 140# be OK to use for any non-commercial use. This is optional. 141#WANT_IDEA= YES # IDEA (128 bit symmetric encryption) 142# 143# The paper size for groff(1), either "letter" or "A4" 144#GROFF_PAPER_SIZE= letter 145# 146# Default format for system documentation, depends on your printer. 147# Set this to "ascii" for simple printers or screen 148# 149#PRINTERDEVICE= ps 150# 151# By default, the system will always use the keyboard/video card as system 152# console. However, the boot blocks may be dynamically configured to use a 153# serial port in addition to or instead of the keyboard/video console. 154# 155# By default we use COM1 as our serial console port *if* we're going to use 156# a serial port as our console at all. Alter as necessary. 157# 158# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 159# 160#BOOT_COMCONSOLE_PORT= 0x3F8 161# 162# The default serial console speed is 9600. Set the speed to a larger value 163# for better interactive response. 164# 165#BOOT_COMCONSOLE_SPEED= 115200 166# 167# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 168# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 169# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 170# still mount the server's '/' (i.e. rather than load the server's kernel). 171# 172#LOADER_TFTP_SUPPORT= YES 173# 174# To build the installer as part of buildworld. 175#WANT_INSTALLER=yes 176# 177# top(1) uses a hash table for the user names. The size of this hash 178# can be tuned to match the number of local users. The table size should 179# be a prime number approximately twice as large as the number of lines in 180# /etc/passwd. The default number is 20011. 181# 182#TOP_TABLE_SIZE= 101 183# 184# Documentation 185# 186# The list of languages and encodings to build and install 187# 188#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 189# 190# The list of locale modules to be compiled-in in the static 191# libc.a (and libc_p.a). 192#STATIC_LOCALES=BIG5 EUC EUCTW ISO2022 MSKanji UTF8 193STATIC_LOCALES=UTF8 194# sendmail 195# 196# The following sets the default m4 configuration file to use at 197# install time. Use with caution as a make install will overwrite 198# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 199# deprecated. The value should be a fully qualified path name. 200# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 201# create /etc/mail/sendmail.cf before installworld installs an 202# updated sendmail binary. 203# 204#SENDMAIL_MC=/etc/mail/myconfig.mc 205# 206# The following sets the default m4 configuration file for mail 207# submission to use at install time. Use with caution as a make 208# install will overwrite any existing /etc/mail/submit.cf. The 209# value should be a fully qualified path name. 210# Avoid using a value of /etc/mail/submit.mc as a buildworld will 211# create /etc/mail/submit.cf before installworld installs an 212# updated sendmail binary. 213# 214#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 215# 216# If you need to build additional .cf files during a make buildworld, 217# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 218# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 219# create /etc/mail/sendmail.cf before installworld installs an 220# updated sendmail binary. 221# 222#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 223# 224# Setting the following variable modifies the flags passed to m4 when 225# building a .cf file from a .mc file. It can be used to enable 226# features disabled by default. 227# 228#SENDMAIL_M4_FLAGS= 229# 230# Setting the following variables modifies the build environment for 231# sendmail and its related utilities. For example, SASL support can be 232# added with settings such as: 233# 234# with SASLv1: 235# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 236# SENDMAIL_LDFLAGS=-L/usr/local/lib 237# SENDMAIL_LDADD=-lsasl 238# 239# with SASLv2: 240# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 241# SENDMAIL_LDFLAGS=-L/usr/local/lib 242# SENDMAIL_LDADD=-lsasl2 243# 244# Note: If you are using Cyrus SASL with other applications which require 245# access to the sasldb file, you should add the following to your 246# sendmail.mc file: 247# 248# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 249# 250#SENDMAIL_CFLAGS= 251#SENDMAIL_LDFLAGS= 252#SENDMAIL_LDADD= 253#SENDMAIL_DPADD= 254# 255# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 256# set-user-ID root binary instead of a set-group-ID smmsp binary and will 257# prevent the installation of /etc/mail/submit.cf. 258# This is a deprecated mode of operation. See etc/mail/README for more 259# information. 260# 261#SENDMAIL_SET_USER_ID= 262# 263# The permissions to use on alias and map databases generated using 264# /etc/mail/Makefile. Defaults to 0640. 265# 266#SENDMAIL_MAP_PERMS= 267