1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.38 2008/11/03 00:25:44 pavalos Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# The CPUTYPE variable controls which processor should be targeted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognized: 24# Intel x86 architecture: 25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 26# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 27# 28# If you experience any problems after setting this flag, please unset 29# it again before submitting a bug report or attempting to modify code. 30# It may be that certain types of software will become unstable after being 31# compiled with processor-specific (or higher - see below) optimization flags. 32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 33# 34#CPUTYPE=i686 35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 37# 38# The CCVER variable controls which GCC-version to use by default. It 39# should be set using ?= so as not to interfere with CCVER overrides from 40# userland or the buildworld. Note that building world or the kernel using 41# an experimental compiler might be broken at any time. We currently 42# recommend that an override NOT be set in /etc/make.conf. 43# 44#CCVER?=gcc34 # (use GCC 3.4, old version) 45#CCVER?=gcc41 # (use GCC 4.1, default) 46# 47# CFLAGS controls the compiler settings used when compiling C code. 48# Note that optimization settings above -O (-O2, ...) are not recommended 49# or supported for compiling the world or the kernel - please revert any 50# nonstandard optimization settings to "-O" before submitting bug reports 51# to the developers. 52# 53#CFLAGS= -O -pipe 54# 55# CXXFLAGS controls the compiler settings used when compiling C++ code. 56# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 57# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 58# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 59# 60#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 61# 62# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 63# for use in developing FreeBSD and testing changes. They can be used by 64# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 65# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 66# 67BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 68 -Wcast-qual -Wchar-subscripts -Winline \ 69 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 70 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 71# 72# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 73#WARNS_WERROR= yes 74# 75# To compile just the kernel with special optimizations, you should use 76# this instead of CFLAGS (which is not applicable to kernel builds anyway). 77# There is very little to gain by using higher optimization levels, and doing 78# so can cause problems. 79# 80#COPTFLAGS= -O -pipe 81# 82# Strip the file before installing. Setting this to nothing will keep 83# the debugging symbols in the installed files. 84#STRIP= -s 85# 86# Compare before install 87#INSTALL=install -C 88# 89# To build ppp with normal permissions 90#PPP_NOSUID= true 91# 92# To enable installing ssh(1) with the setuid bit turned on 93#ENABLE_SUID_SSH= true 94# 95# Default thread library (c_r or thread_xu) 96THREAD_LIB?= thread_xu 97# 98# To use GNU cpio as the standard cpio. The default is bsdcpio. 99#WITH_GCPIO= true 100# 101# To enable Hesiod support in libc 102#WANT_HESIOD= true 103# 104# To disable name caching in the nsswitch subsystem. The generic caching 105# daemon, nscd(8), will not be built either if this option is set. 106#NO_NS_CACHING= true 107# 108# To avoid building various parts of the base system: 109#NO_BIND= true # do not build BIND 110#NO_CRYPT= true # do not build crypto code 111#NO_CVS= true # do not build CVS 112#NO_GAMES= true # do not enter the games subdirectory 113#NO_GCC34= true # do not build gcc-3.4 114#NO_GDB= true # do not build GDB 115#NO_I4B= true # do not build isdn4bsd package 116#NO_IPFILTER= true # do not build IP Filter package 117#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) 118#NO_LPR= true # do not build lpr and related programs 119#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 120#NO_MODULES= true # do not build modules with the kernel 121#NO_OBJC= true # do not build Objective C support 122#NO_OPENSSH= true # do not build OpenSSH 123#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 124#NO_SENDMAIL= true # do not build sendmail and related programs 125#NO_SHARE= true # do not enter the share subdirectory 126#NO_X= true # do not compile in XWindows support (e.g. doscmd) 127#NOINFO= true # do not make or install info files 128#NOINFOCOMPRESS=true # do not compress info files 129#NOMAN= true # do not build manual pages 130#NOMANCOMPRESS= true # do not compress man pages 131#NOPROFILE= true # Avoid compiling profiled libraries 132# 133# To build sys/modules when building the world (our old way of doing things) 134#MODULES_WITH_WORLD=true # do not build modules when building kernel 135# 136# The list of modules to build instead of all of them. 137#MODULES_OVERRIDE= emulation/linux net/ipfw 138# 139# To avoid running MAKEDEV all on /dev during install: 140#NO_MAKEDEV= true 141# 142# The following controls building optional IDEA code in libcrypto. 143# Patents are involved - you must not use this unless 144# you either have a license or fall within patent 'fair use' 145# provisions. 146# 147# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 148# 149# IDEA is patented in the USA and many European countries - thought to 150# be OK to use for any non-commercial use. This is optional. 151#WANT_IDEA= YES # IDEA (128 bit symmetric encryption) 152# 153# The paper size for groff(1), either "letter" or "A4" 154#GROFF_PAPER_SIZE= letter 155# 156# Default format for system documentation, depends on your printer. 157# Set this to "ascii" for simple printers or screen 158# 159#PRINTERDEVICE= ps 160# 161# By default, the system will always use the keyboard/video card as system 162# console. However, the boot blocks may be dynamically configured to use a 163# serial port in addition to or instead of the keyboard/video console. 164# 165# By default we use COM1 as our serial console port *if* we're going to use 166# a serial port as our console at all. Alter as necessary. 167# 168# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 169# 170#BOOT_COMCONSOLE_PORT= 0x3F8 171# 172# The default serial console speed is 9600. Set the speed to a larger value 173# for better interactive response. 174# 175#BOOT_COMCONSOLE_SPEED= 115200 176# 177# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 178# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 179# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 180# still mount the server's '/' (i.e. rather than load the server's kernel). 181# 182#LOADER_TFTP_SUPPORT= YES 183# 184# To build the installer as part of buildworld. 185#WANT_INSTALLER=yes 186# 187# If you want Kerberos 5, define this. 188#WANT_KERBEROS= yes 189# 190# If you want to use the k5su utility, define this to have it installed 191# set-user-ID. 192#ENABLE_SUID_K5SU= yes 193# 194# top(1) uses a hash table for the user names. The size of this hash 195# can be tuned to match the number of local users. The table size should 196# be a prime number approximately twice as large as the number of lines in 197# /etc/passwd. The default number is 20011. 198# 199#TOP_TABLE_SIZE= 101 200# 201# Documentation 202# 203# The list of languages and encodings to build and install 204# 205#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 206# 207# sendmail 208# 209# The following sets the default m4 configuration file to use at 210# install time. Use with caution as a make install will overwrite 211# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 212# deprecated. The value should be a fully qualified path name. 213# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 214# create /etc/mail/sendmail.cf before installworld installs an 215# updated sendmail binary. 216# 217#SENDMAIL_MC=/etc/mail/myconfig.mc 218# 219# The following sets the default m4 configuration file for mail 220# submission to use at install time. Use with caution as a make 221# install will overwrite any existing /etc/mail/submit.cf. The 222# value should be a fully qualified path name. 223# Avoid using a value of /etc/mail/submit.mc as a buildworld will 224# create /etc/mail/submit.cf before installworld installs an 225# updated sendmail binary. 226# 227#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 228# 229# If you need to build additional .cf files during a make buildworld, 230# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 231# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 232# create /etc/mail/sendmail.cf before installworld installs an 233# updated sendmail binary. 234# 235#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 236# 237# Setting the following variable modifies the flags passed to m4 when 238# building a .cf file from a .mc file. It can be used to enable 239# features disabled by default. 240# 241#SENDMAIL_M4_FLAGS= 242# 243# Setting the following variables modifies the build environment for 244# sendmail and its related utilities. For example, SASL support can be 245# added with settings such as: 246# 247# with SASLv1: 248# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 249# SENDMAIL_LDFLAGS=-L/usr/local/lib 250# SENDMAIL_LDADD=-lsasl 251# 252# with SASLv2: 253# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 254# SENDMAIL_LDFLAGS=-L/usr/local/lib 255# SENDMAIL_LDADD=-lsasl2 256# 257# Note: If you are using Cyrus SASL with other applications which require 258# access to the sasldb file, you should add the following to your 259# sendmail.mc file: 260# 261# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 262# 263#SENDMAIL_CFLAGS= 264#SENDMAIL_LDFLAGS= 265#SENDMAIL_LDADD= 266#SENDMAIL_DPADD= 267# 268# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 269# set-user-ID root binary instead of a set-group-ID smmsp binary and will 270# prevent the installation of /etc/mail/submit.cf. 271# This is a deprecated mode of operation. See etc/mail/README for more 272# information. 273# 274#SENDMAIL_SET_USER_ID= 275# 276# The permissions to use on alias and map databases generated using 277# /etc/mail/Makefile. Defaults to 0640. 278# 279#SENDMAIL_MAP_PERMS= 280